The concept of emissivity has been with the scientific and engineering world since Planck formulated his blackbody radiation law more than a century ago.Nevertheless,emissivity is an elusive concept even for ex⁃perts....The concept of emissivity has been with the scientific and engineering world since Planck formulated his blackbody radiation law more than a century ago.Nevertheless,emissivity is an elusive concept even for ex⁃perts.It is a vague and fuzzy concept for the wider community of engineers.The importance of remote sensing of temperature by measuring IR radiation has been recognized in a wide range of industrial,medical,and environ⁃mental uses.One of the major sources of errors in IR radiometry is the emissivity of the surface being measured.In real experiments,emissivity may be influenced by many factors:surface texture,spectral properties,oxida⁃tion,and aging of surfaces.While commercial blackbodies are prevalent,the much-needed grey bodies with a known emissivity,are unavailable.This study describes how to achieve a calibrated and stable emissivity with a blackbody,a perforated screen,and a reliable and linear novel IR thermal sensor,18 dubbed TMOS.The Digital TMOS is now a low-cost commercial product,it requires low power,and it has a small form factor.The method⁃ology is based on two-color measurements,with two different optical filters,with selected wavelengths conform⁃ing to the grey body definition of the use case under study.With a photochemically etched perforated screen,the effective emissivity of the screen is simply the hole density area of the surface area that emits according to the blackbody temperature radiation.The concept is illustrated with ray tracing simulations,which demonstrate the approach.Measured results are reported.展开更多
The rapid evolution of hypersonic vehicle technologies necessitates robust thermal protection systems capable of withstanding extreme oxidative ablation.This study introduces a novel gradient-architected ZrB_(2)-MoSi_...The rapid evolution of hypersonic vehicle technologies necessitates robust thermal protection systems capable of withstanding extreme oxidative ablation.This study introduces a novel gradient-architected ZrB_(2)-MoSi_(2)-SiC dense layer embedded within a lightweight three-dimensional(3D)needled carbon fiber composite.Utilizing the volatility of ethanol and polycarbosilane,the ceramic slurry is selectively infused into targeted regions of the fibrous structure,optimizing the ZrB_(2)to MoSi_(2)ratio to enhance performance.The resulting dense layer exhibits exceptional emissivity,surpassing 0.90 in the 1-3μm range and exceeding 0.87 in the 2-14μm range.Moreover,it demonstrates remarkable oxidative ablation resistance.Specifically,at an optimized ZrB_(2)to MoSi_(2)ratio of 6:4,the dense layer achieves a minimal linear ablation rate of 0.015μm·s^(-1) under a 1.5 MW·m^(-2)oxyacetylene flame for 1000 s.Even after exposure to oxyacetylene ablation at surface temperatures of approximately 1750℃for 1000 s,the dense layer retains its structural integrity,highlighting its enduring oxidation resistance.The incorporation of MoSi_(2)not only enhances emissivity but also fortifies the ZrO_(2)and SiO_(2)oxide layers,crucial for environments with elevated oxygen levels,thereby mitigating the active oxidation of SiC.This combination of high emissivity and long-term oxidation resistance at ultra-high temperatures positions the ZrB_(2)-MoSi_(2)-SiC dense layer as an exceptionally promising candidate for advanced thermal protection in hypersonic vehicles.展开更多
We present in this paper a numerical study of the validity limit of the geometrical optics approximation compared with a differential method which is established according to rigorous formalisms based on the electroma...We present in this paper a numerical study of the validity limit of the geometrical optics approximation compared with a differential method which is established according to rigorous formalisms based on the electromagnetic theory. The precedent studies show that this method is adapted to the study of diffraction by periodic rough surfaces. We determine by two methods the emissivity of gold and tungsten for surfaces with a rectangular or sinusoidal profile, for a wavelength equal to 0.55 microns. The monochromatic directional emissivity of these surfaces clearly depends on the angle of incidence, the surface profile, height, period and the nature of the material. We perform our calculations by a method of coupled wave analysis (CWA) and a geometric optics method (GOA). The latter method is theoretically valid only when the dimensions of the cavities are very large compared to the wavelength, while the CWA is theoretically correct whatever these dimensions. The main purpose of this work is to investigate the validity limit of GOA compared with CWA. The obtained results for a fixed height of the grating, allowed us to delimit the validity domain of the optic geometrical approximation for the treated cases. Finally, the agreement between the emissivity calculated by the differential method and that given on the basis of the homogenization theory is satisfactory when the period is much smaller than the wavelength.展开更多
Flame temperature and spectral emissivity were the important parameters characterizing the sufficient degree of fuel combustion and the particle radiative characteristics in the Rocket Based Combined Cycle(RBCC)combus...Flame temperature and spectral emissivity were the important parameters characterizing the sufficient degree of fuel combustion and the particle radiative characteristics in the Rocket Based Combined Cycle(RBCC)combustor.To investigate the combustion characteristics of the complex supersonic flame in the RBCC combustor,a new radiation thermometry combined with Levenberg-Marquardt(LM)algorithm and the least squares method was proposed to measure the temperature,emissivity and spectral radiative properties based on the flame emission spectrum.In-situ measurements of the flame temperature,emissivity and spectral radiative properties were carried out in the RBCC direct-connected test bench with laser-induced plasma combustion enhancement(LIPCE)and without LIPCE.The flame average temperatures at fuel global equivalence ratio(a)of 1.0b and 0.6 with LIPCE were 4.51%and 2.08%higher than those without LIPCE.The flame combustion oscillation of kerosene tended to be stable in the recirculation zone of cavity with the thermal and chemical effects of laser induced plasma.The differences of flame temperature at a=1.0b and 0.6 were 503 K and 523 K with LIPCE,which were 20.07%and42.64%lower than those without LIPCE.The flame emissivity with methane assisted ignition was 80.46%lower than that without methane assisted ignition,due to the carbon-hydrogen ratio of kerosene was higher than that of methane.The spectral emissivities at 600 nm with LIPCE were 1.25%,22.2%,and 4.22%lower than those without LIPCE at a=1.0a(with methane assisted ignition),1.0b(without methane assisted ignition)and 0.6.The effect of concentration in the emissivity was removed by normalization to analyze the flame radiative properties in the RBCC combustor chamber.The maximum differences of flame normalized emissivity were 50.91%without LIPCE and 27.53%with LIPCE.The flame radiative properties were stabilized under the thermal and chemical effects of laser induced plasma at a=0.6.展开更多
In a previous paper it was shown that the normal spectral emissivity at 684.5 nm of a binary alloy can be lower than that of the pure constituent components. For the actual probes it was found that the observed values...In a previous paper it was shown that the normal spectral emissivity at 684.5 nm of a binary alloy can be lower than that of the pure constituent components. For the actual probes it was found that the observed values of normal spectral emissivity of the alloys are in between or higher than those of the pure constituent components. Experiments were conducted on the alloy systems Ni-Ti and Au-Ni. Their emissivity as well as electrical resistivity and enthalpy as a function of temperature is presented.展开更多
Spray-drying was used to produce the high emissivity NiCr2O4 powders with a spinel structure. Preliminary investigations focused on fabricating the high emissivity powders for infrared radiation coatings and finding t...Spray-drying was used to produce the high emissivity NiCr2O4 powders with a spinel structure. Preliminary investigations focused on fabricating the high emissivity powders for infrared radiation coatings and finding the relationship between microstructure and emissivity. The NiCr2O4 powders were characterized for composition, microstructure, and infrared emissivity by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, infrared radiant instrument, and Fourier transform infrared spectra （FT-IR）. Thermogravimetry and differential thermal analysis show that the appropriate baking temperature for NiCr2O4 powder preparation is about 1200？C. The emissivity measurement and FT-IR spectra show that, because of the special spinel structure, the NiCr2O4 powders have a high emissivity about 0.91. Spray-drying is a suitable method to produce the high emissivity ceramic powders.展开更多
Air plasma spraying （APS） was used to produce high emissivity coatings with a NiCr204 spinel structure. The relationship between the emissivity and the crystal structure was investigated. X-ray diffraction （XRD） a...Air plasma spraying （APS） was used to produce high emissivity coatings with a NiCr204 spinel structure. The relationship between the emissivity and the crystal structure was investigated. X-ray diffraction （XRD） analyses show that NiCr204 spinel has been fabri- cated with the space group Fd3m. Scanning electron microscope （SEM） photographs show that the coating consists of a laminated structure with homogeneous grains and high porosity because of the unique feature of plasma spraying. The emissivity measurement and Fourier transformation infrared radiation （FT-IR） spectra show that NiCr204 has a high emissivity of about 0.91 because of its special spinel structure APS is a suitable method to produce high emissivity coatings.展开更多
Microwave Land Surface Emissivity(MLSE)over China under both clear and cloudy sky conditions was retrieved using measurements of recalibrated microwave brightness temperatures(Tbs)from Fengyun-3B Microwave Radiation I...Microwave Land Surface Emissivity(MLSE)over China under both clear and cloudy sky conditions was retrieved using measurements of recalibrated microwave brightness temperatures(Tbs)from Fengyun-3B Microwave Radiation Imager(FY-3B MWRI),combined with cloud properties derived from Himawari-8 Advanced Himawari Imager(AHI)observations.The contributions from cloud particles and atmospheric gases to the upwelling Tbs at the top of atmosphere were calculated and removed in radiative transfer.The MLSEs at horizontal polarizations at 10.65,18.7,and 36.5 GHz during 7 July 2015 to 30 June 2019 over China showed high values in the southeast vegetated area and low values in the northwest barren,or sparsely vegetated,area.The maximum values were found in the belt area of the Qinling-Taihang Mountains and the eastern edge of the Qinghai-Tibet Plateau,which is highly consistent with MLSEs derived from AMSR-E.It demonstrates that the measurements of FY-3B MWRI Tbs,including its calibration and validation,are reliable,and the retrieval algorithm developed in this study works well.Seasonal variations of MLSE in China are mainly driven by the combined effects of vegetation,rainfall,and snow cover.In tropical and southern forest regions,the seasonal variation of MLSE is small due to the enhancement from vegetation and the suppression from rainfall.In the boreal area,snow causes a significant decrease of MLSE at 36.5 GHz in winter.Meanwhile,the MLSE at lower frequencies experiences less suppression.In the desert region in Xinjiang,increases of MLSEs at all frequencies are observed with increasing snow cover.展开更多
It is shown that the measurement of only one component of the Wein’s spectrum of thermal radiation in range λT ≤ 3000 (°C μm) is sufficient to estimate the true temperature and spectral emissivity of the s...It is shown that the measurement of only one component of the Wein’s spectrum of thermal radiation in range λT ≤ 3000 (°C μm) is sufficient to estimate the true temperature and spectral emissivity of the selected component with sufficient accuracy, although more than one hundred years this statement was considered as incorrect. The proposed method is based on the formation of the linear dependence of the logarithm of the emissivity of not real wavelengths and artificially generated “virtual” spectral components.展开更多
本研究在WACCM+DART(Whole Atmosphere Community Climate Model,Data Assimilation Research TestBed)临近空间资料同化预报系统中加入SABER(Sounding of the Atmosphere using Broadband Emission Radiometry)和MLS(Microwave Limb So...本研究在WACCM+DART(Whole Atmosphere Community Climate Model,Data Assimilation Research TestBed)临近空间资料同化预报系统中加入SABER(Sounding of the Atmosphere using Broadband Emission Radiometry)和MLS(Microwave Limb Sounder)臭氧观测同化接口,并以2016年2月一次平流层爆发性增温(SSW)过程为模拟个例进行了SABER和MLS臭氧观测同化试验,得出以下结论:同化SABER和MLS臭氧体积浓度观测得出的WACCM+DART臭氧分析场能够较真实反映SSW期间北极上空平流层臭氧廓线随时间的演变特征,且与ERA5(Fifth Generation of ECMWF Reanalyses)再分析资料描述的臭氧变化特征具有很好的一致性;基于SABER和MLS臭氧观测的WACCM臭氧6 h预报检验表明同化臭氧观测对臭氧分析和预报误差的改善效果主要体现在南半球高纬平流层和北半球中高纬平流层中上层—中间层底部;基于ERA5再分析资料的WACCM+DART分析场检验表明同化SABER和MLS臭氧体积浓度资料可在提高北半球高纬地区上平流层—中间层底部臭氧场分析质量的同时减小该地区上平流层—中间层底部温度场和中间层底部纬向风场的分析误差;基于MLS臭氧资料的臭氧中期预报检验表明相对控制试验同化SABER和MLS臭氧体积浓度资料能更好改善0~5 d下平流层和中间层底部臭氧的预报效果。展开更多
The infrared transmittance and emissivity of heat-insulating coatings pigmented with various structural particles were studied using Kubelka-Munk theory and Mie theory. The primary design purpose was to obtain the low...The infrared transmittance and emissivity of heat-insulating coatings pigmented with various structural particles were studied using Kubelka-Munk theory and Mie theory. The primary design purpose was to obtain the low transmittance and low emissivity coatings to reduce the heat transfer by thermal radiation for high-temperature applications. In the case of silica coating layers constituted with various structural titania particles （solid, hollow, and core-shell spherical）, the dependence of transmittance and emissivity of the coating layer on the particle structure and the layer thickness was investigated and optimized. The results indicate that the coating pigmented with core-shell titania particles exhibits a lower infrared transmittance and a lower emissivity value than that with other structural particles and is suitable to radiative heat-insulating applications.展开更多
LaMgAl_(11)O_(19)(LMA),characterized by high melting point,low density and thermal conductivity as well as good infrared emissivity,is regarded as a potential candidate for the thermal protection of hypersonic vehicle...LaMgAl_(11)O_(19)(LMA),characterized by high melting point,low density and thermal conductivity as well as good infrared emissivity,is regarded as a potential candidate for the thermal protection of hypersonic vehicles.Nevertheless,the unsatisfied phase stability at high temperature results in declining of the emissivity below 6μm,which limits the extensive applications of LaMgAl_(11)O_(19).In order to overcome this obstacle,three dense bulk high-entropy ceramics,(La_(0.2)Nd_(0.2)Gd_(0.2)Sm_(0.2)Pr_(0.2))MgAl_(11)O_(19)(HE LMA-1),(La_(0.2)Nd_(0.2)Gd_(0.2)Sm_(0.2)Dy_(0.2))Mg Al_(11)O_(19)(HE LMA-2)and La(Mg_(0.2)Fe_(0.2)Co_(0.2)Ni_(0.2)Zn_(0.2))Al_(11)O_(19)(HE LMA-3),were designed and successfully prepared through solid state reaction at 1700℃for 4 h in one step.XRD analyses show that the phase compositions of HE LMA-1,HE LMA-2 and HE LMA-3 are single-phase solid solutions with the relative density of 95.61%,95.49%and 94.31%,respectively.Heat treatment experiments demonstrate that the phase composition of HE LMA-1 remains a single phase after high-temperature heating,while second phase appears in other two samples.The stability of HE LMA-1 is attributed to small average size differenceδ(~4%)of constitute elements.Intriguingly,the average emissivity of HE LMA-1 in the range of 3-6μm reaches 0.9,which is significantly higher than that of LMA and other two HE LMA samples.The emissivity of all samples remains above 0.95 from 6 to 10μm.In the far infrared region(10-14μm),although the emissivity of these specimens decreases slightly,it still exceeds 0.85.The UV-Vis absorption spectra indicate that the formation of many discrete impurity energy levels with small intervals in HE LMA-1 promotes the f electrons to transit between adjacent impurity energy levels and conduction band,which enhances the infrared emission of HE LMA-1 below 6μm.In a word,with improved phase stability and thermal emissivity in infrared range,high-entropy REMgAl_(11)O_(19),especially(La_(0.2)Nd_(0.2)Gd_(0.2)Sm_(0.2)Pr_(0.2))MgAl_(11)O_(19)(HE LMA-1),is a promising candidate in thermal protection coatings of hypersonic vehicles.展开更多
An accurate accounting of land surface emissivity(ε) is important both for the retrieval of surface temperatures and the calculation of the longwave surface energy budgets.Since ε is one of the important parameteriz...An accurate accounting of land surface emissivity(ε) is important both for the retrieval of surface temperatures and the calculation of the longwave surface energy budgets.Since ε is one of the important parameterizations in land surface models(LSMs),accurate accounting also improves the accuracy of surface temperatures and sensible heat fluxes simulated by LSMs.In order to obtain an accurate emissivity,this paper focuses on estimating ε from data collected in the hinterland of Taklimakan Desert by two different methods.In the first method,ε was derived from the surface broadband emissivity in the 8–14 μm thermal infrared atmospheric window,which was determined from spectral radiances observed by field measurements using a portable Fourier transform infrared spectrometer,the mean ε being 0.9051.The second method compared the observed and calculated heat fluxes under nearneutral atmospheric stability and estimated ε indirectly by minimizing the root-mean-square difference between them.The result of the second method found a mean value of 0.9042,which is consistent with the result by the first method.Although the two methods recover ε from different field experiments and data,the difference of meanvalues is 0.0009.The first method is superior to the indirect method,and is also more convenient.展开更多
NiCr2O4（NCO）spinel composites with different Mn/Ni atomic ratios（Mn/Ni=0.05,0.10,0.15,and 0.20）were synthesized via solid state reaction method.Phase compositions and microstructure of samples were characterized b...NiCr2O4（NCO）spinel composites with different Mn/Ni atomic ratios（Mn/Ni=0.05,0.10,0.15,and 0.20）were synthesized via solid state reaction method.Phase compositions and microstructure of samples were characterized by X-ray diffraction（XRD）and X-ray photoelectron spectroscopy（XPS）.The TG-DSC curves showed that the appropriate baking temperature for Mn-doped NCO spinel preparation was approximately 1 320℃.X-ray diffraction patterns exhibited the formation of NCO spinel with Fd-3m space group.Valence state of the Mn ions was determined from 2p and 3s X-ray photoelectron spectra.Manganese ions were mostly in divalent and trivalent states,and the ratio of Mn^2＋/Mn^3＋was 0.78-0.98.Fourier transform infrared spectroscopy（FTIR）was used to analyze the spectral emissivity of Mn doped NCO spinel.It was revealed that the infrared emissivity of Mn-doped NCO spinel in 1.8-5μm could be significantly enhanced with increasing content of Mn^2＋,reaching as high as 0.9398.Mn-doped NCO spinel showed excellent radiation performance and good prospect in high emissivity applications in the temperature range of 800-1 200℃.展开更多
Transition metal disilicides are widely used as heating elements and infrared emission coatings.However,the limited intrinsic infrared emissivity and high thermal conductivity are the main limitations to their applica...Transition metal disilicides are widely used as heating elements and infrared emission coatings.However,the limited intrinsic infrared emissivity and high thermal conductivity are the main limitations to their applications as infrared emission coatings in the thermal protection system.To cope with these prob-lems,four medium and high-entropy transition metal disilicides,i.e.,(V_(0.25)Ta_(0.25)Mo_(0.25)W_(0.25))Si_(2)(ME-1),(Nb_(0.25)Ta_(0.25)Mo_(0.25)W_(0.25))Si_(2)(ME-2),(V_(0.2)Nb_(0.2)Ta_(0.2)Mo_(0.2)W_(0.2))Si_(2)(HE-1),and(Cr_(0.2)Nb_(0.2)Ta_(0.2)Mo_(0.2)W_(0.2))Si_(2)(HE-2),were designed and synthesized by spark plasma sintering method using transition metal binary disilicides as precursors.The introduction of multi-elements into transition metal disilicides not only im-proved the infrared emissivity but also reduced the electrical and thermal conductivity.Among them,(Cr_(0.2)Nb_(0.2)Ta_(0.2)Mo_(0.2)W_(0.2))Si_(2)(HE-2)had the lowest electrical conductivity of 3789 S cm-1,which is over one order of magnitude lower than that of MoSi_(2)(50000 S cm^(-1)),and total infrared emissivity of 0.42 at room temperature,which is nearly double of that of TaSi_(2).Benefiting from low electrical conductivity and phonon scattering due to lattice distortion,the medium and high-entropy transition metal disilicides also demonstrated a significant decline in thermal conductivity compared to their binary counterparts.Of all samples,HE-2 exhibited the lowest thermal conductivity of 6.4 W m^(−1)K^(−1).The high-entropy tran-sition metal disilicides also present excellent oxidation resistance at high temperatures.The improved infrared emissivity,reduced thermal conductivity,excellent oxidation resistance,and lower densities of these medium and high-entropy transition metal disilicides portend that they are promising as infrared emission coating materials for applications in thermal protection systems.展开更多
A type of combined optical fiber interferometric acoustic emission sensor is proposed. The sensor can be independent on the laser source and make light interference by matching the lengths of two arms,so it can be use...A type of combined optical fiber interferometric acoustic emission sensor is proposed. The sensor can be independent on the laser source and make light interference by matching the lengths of two arms,so it can be used to monitor the health of large structure. Theoretical analyses indicate that the system can be equivalent to the Michelson interferometer with two optical fiber loop reflectors,and its sensitivity has been remarkably increased because of the decrease of the losses of light energy. PZT is powered by DC regulator to control the operating point of the system,so the system can accurately detect feeble vibration which is generated by ultrasonic waves propagating on the surface of solid. The amplitude and the frequency of feeble vibration signal are obtained by detecting the output light intensity of interferometer and using Fourier transform technique. The results indicate that the system can be used to detect the acoustic emission signals by the frequency characteristics.展开更多
文摘The concept of emissivity has been with the scientific and engineering world since Planck formulated his blackbody radiation law more than a century ago.Nevertheless,emissivity is an elusive concept even for ex⁃perts.It is a vague and fuzzy concept for the wider community of engineers.The importance of remote sensing of temperature by measuring IR radiation has been recognized in a wide range of industrial,medical,and environ⁃mental uses.One of the major sources of errors in IR radiometry is the emissivity of the surface being measured.In real experiments,emissivity may be influenced by many factors:surface texture,spectral properties,oxida⁃tion,and aging of surfaces.While commercial blackbodies are prevalent,the much-needed grey bodies with a known emissivity,are unavailable.This study describes how to achieve a calibrated and stable emissivity with a blackbody,a perforated screen,and a reliable and linear novel IR thermal sensor,18 dubbed TMOS.The Digital TMOS is now a low-cost commercial product,it requires low power,and it has a small form factor.The method⁃ology is based on two-color measurements,with two different optical filters,with selected wavelengths conform⁃ing to the grey body definition of the use case under study.With a photochemically etched perforated screen,the effective emissivity of the screen is simply the hole density area of the surface area that emits according to the blackbody temperature radiation.The concept is illustrated with ray tracing simulations,which demonstrate the approach.Measured results are reported.
基金supported by the National Natural Science Foundation of China(Nos.52272060,51902067,51872066 and 52172041)the Key Program of National Natural Science Foundation of China(No.52032003)+5 种基金the Young Elite Scientists Sponsorship Program by CAST(No.2020QNRC001)China Postdoctoral Science Foundation(Nos.2019M651282 and 2022T150157)Heilongjiang Provincial Postdoctoral Science Foundation(Nos.LBH-Z19022 and LBH-TZ2207)Heilongjiang Touyan Innovation Team Program,Shanghai Aerospace Science and Technology Innovation Fund(No.SAST2019-012)the Fundamental Research Funds for the Central Universities(No.FRFCU5710051022)the Science Foundation of National Key Laboratory of Science and Technology on Advanced Composites in Special Environments(No.JCKYS2022603C011).
文摘The rapid evolution of hypersonic vehicle technologies necessitates robust thermal protection systems capable of withstanding extreme oxidative ablation.This study introduces a novel gradient-architected ZrB_(2)-MoSi_(2)-SiC dense layer embedded within a lightweight three-dimensional(3D)needled carbon fiber composite.Utilizing the volatility of ethanol and polycarbosilane,the ceramic slurry is selectively infused into targeted regions of the fibrous structure,optimizing the ZrB_(2)to MoSi_(2)ratio to enhance performance.The resulting dense layer exhibits exceptional emissivity,surpassing 0.90 in the 1-3μm range and exceeding 0.87 in the 2-14μm range.Moreover,it demonstrates remarkable oxidative ablation resistance.Specifically,at an optimized ZrB_(2)to MoSi_(2)ratio of 6:4,the dense layer achieves a minimal linear ablation rate of 0.015μm·s^(-1) under a 1.5 MW·m^(-2)oxyacetylene flame for 1000 s.Even after exposure to oxyacetylene ablation at surface temperatures of approximately 1750℃for 1000 s,the dense layer retains its structural integrity,highlighting its enduring oxidation resistance.The incorporation of MoSi_(2)not only enhances emissivity but also fortifies the ZrO_(2)and SiO_(2)oxide layers,crucial for environments with elevated oxygen levels,thereby mitigating the active oxidation of SiC.This combination of high emissivity and long-term oxidation resistance at ultra-high temperatures positions the ZrB_(2)-MoSi_(2)-SiC dense layer as an exceptionally promising candidate for advanced thermal protection in hypersonic vehicles.
文摘We present in this paper a numerical study of the validity limit of the geometrical optics approximation compared with a differential method which is established according to rigorous formalisms based on the electromagnetic theory. The precedent studies show that this method is adapted to the study of diffraction by periodic rough surfaces. We determine by two methods the emissivity of gold and tungsten for surfaces with a rectangular or sinusoidal profile, for a wavelength equal to 0.55 microns. The monochromatic directional emissivity of these surfaces clearly depends on the angle of incidence, the surface profile, height, period and the nature of the material. We perform our calculations by a method of coupled wave analysis (CWA) and a geometric optics method (GOA). The latter method is theoretically valid only when the dimensions of the cavities are very large compared to the wavelength, while the CWA is theoretically correct whatever these dimensions. The main purpose of this work is to investigate the validity limit of GOA compared with CWA. The obtained results for a fixed height of the grating, allowed us to delimit the validity domain of the optic geometrical approximation for the treated cases. Finally, the agreement between the emissivity calculated by the differential method and that given on the basis of the homogenization theory is satisfactory when the period is much smaller than the wavelength.
基金supported by the National Natural Science Foundation of China (Grant Nos.52276185,52276189 and 51976057)the Fundamental Research Funds for the Central Universities (Grant No.2021MS126)+1 种基金the Natural Science Foundation of Jiangsu Province (Grant No.BK20231209)the Proof-of-Concept Project of Zhongguancun Open Laboratory (Grant No.20220981113)。
文摘Flame temperature and spectral emissivity were the important parameters characterizing the sufficient degree of fuel combustion and the particle radiative characteristics in the Rocket Based Combined Cycle(RBCC)combustor.To investigate the combustion characteristics of the complex supersonic flame in the RBCC combustor,a new radiation thermometry combined with Levenberg-Marquardt(LM)algorithm and the least squares method was proposed to measure the temperature,emissivity and spectral radiative properties based on the flame emission spectrum.In-situ measurements of the flame temperature,emissivity and spectral radiative properties were carried out in the RBCC direct-connected test bench with laser-induced plasma combustion enhancement(LIPCE)and without LIPCE.The flame average temperatures at fuel global equivalence ratio(a)of 1.0b and 0.6 with LIPCE were 4.51%and 2.08%higher than those without LIPCE.The flame combustion oscillation of kerosene tended to be stable in the recirculation zone of cavity with the thermal and chemical effects of laser induced plasma.The differences of flame temperature at a=1.0b and 0.6 were 503 K and 523 K with LIPCE,which were 20.07%and42.64%lower than those without LIPCE.The flame emissivity with methane assisted ignition was 80.46%lower than that without methane assisted ignition,due to the carbon-hydrogen ratio of kerosene was higher than that of methane.The spectral emissivities at 600 nm with LIPCE were 1.25%,22.2%,and 4.22%lower than those without LIPCE at a=1.0a(with methane assisted ignition),1.0b(without methane assisted ignition)and 0.6.The effect of concentration in the emissivity was removed by normalization to analyze the flame radiative properties in the RBCC combustor chamber.The maximum differences of flame normalized emissivity were 50.91%without LIPCE and 27.53%with LIPCE.The flame radiative properties were stabilized under the thermal and chemical effects of laser induced plasma at a=0.6.
基金This work is financially supported by the "Austrian Science Fund - FWF", Sensengasse 1, 1090 Vienna, under contract No. P15055
文摘In a previous paper it was shown that the normal spectral emissivity at 684.5 nm of a binary alloy can be lower than that of the pure constituent components. For the actual probes it was found that the observed values of normal spectral emissivity of the alloys are in between or higher than those of the pure constituent components. Experiments were conducted on the alloy systems Ni-Ti and Au-Ni. Their emissivity as well as electrical resistivity and enthalpy as a function of temperature is presented.
文摘Spray-drying was used to produce the high emissivity NiCr2O4 powders with a spinel structure. Preliminary investigations focused on fabricating the high emissivity powders for infrared radiation coatings and finding the relationship between microstructure and emissivity. The NiCr2O4 powders were characterized for composition, microstructure, and infrared emissivity by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, infrared radiant instrument, and Fourier transform infrared spectra （FT-IR）. Thermogravimetry and differential thermal analysis show that the appropriate baking temperature for NiCr2O4 powder preparation is about 1200？C. The emissivity measurement and FT-IR spectra show that, because of the special spinel structure, the NiCr2O4 powders have a high emissivity about 0.91. Spray-drying is a suitable method to produce the high emissivity ceramic powders.
文摘Air plasma spraying （APS） was used to produce high emissivity coatings with a NiCr204 spinel structure. The relationship between the emissivity and the crystal structure was investigated. X-ray diffraction （XRD） analyses show that NiCr204 spinel has been fabri- cated with the space group Fd3m. Scanning electron microscope （SEM） photographs show that the coating consists of a laminated structure with homogeneous grains and high porosity because of the unique feature of plasma spraying. The emissivity measurement and Fourier transformation infrared radiation （FT-IR） spectra show that NiCr204 has a high emissivity of about 0.91 because of its special spinel structure APS is a suitable method to produce high emissivity coatings.
基金the National Natural Science Foundation of China(Grant Nos.41830104,41661144007,41675022,and 41375148)Research and Development Program of China(Grant No.2017YFC1501402)the Jiangsu Provincial 2011 Program(Col-laborative Innovation Center of Climate Change).
文摘Microwave Land Surface Emissivity(MLSE)over China under both clear and cloudy sky conditions was retrieved using measurements of recalibrated microwave brightness temperatures(Tbs)from Fengyun-3B Microwave Radiation Imager(FY-3B MWRI),combined with cloud properties derived from Himawari-8 Advanced Himawari Imager(AHI)observations.The contributions from cloud particles and atmospheric gases to the upwelling Tbs at the top of atmosphere were calculated and removed in radiative transfer.The MLSEs at horizontal polarizations at 10.65,18.7,and 36.5 GHz during 7 July 2015 to 30 June 2019 over China showed high values in the southeast vegetated area and low values in the northwest barren,or sparsely vegetated,area.The maximum values were found in the belt area of the Qinling-Taihang Mountains and the eastern edge of the Qinghai-Tibet Plateau,which is highly consistent with MLSEs derived from AMSR-E.It demonstrates that the measurements of FY-3B MWRI Tbs,including its calibration and validation,are reliable,and the retrieval algorithm developed in this study works well.Seasonal variations of MLSE in China are mainly driven by the combined effects of vegetation,rainfall,and snow cover.In tropical and southern forest regions,the seasonal variation of MLSE is small due to the enhancement from vegetation and the suppression from rainfall.In the boreal area,snow causes a significant decrease of MLSE at 36.5 GHz in winter.Meanwhile,the MLSE at lower frequencies experiences less suppression.In the desert region in Xinjiang,increases of MLSEs at all frequencies are observed with increasing snow cover.
文摘It is shown that the measurement of only one component of the Wein’s spectrum of thermal radiation in range λT ≤ 3000 (°C μm) is sufficient to estimate the true temperature and spectral emissivity of the selected component with sufficient accuracy, although more than one hundred years this statement was considered as incorrect. The proposed method is based on the formation of the linear dependence of the logarithm of the emissivity of not real wavelengths and artificially generated “virtual” spectral components.
文摘本研究在WACCM+DART(Whole Atmosphere Community Climate Model,Data Assimilation Research TestBed)临近空间资料同化预报系统中加入SABER(Sounding of the Atmosphere using Broadband Emission Radiometry)和MLS(Microwave Limb Sounder)臭氧观测同化接口,并以2016年2月一次平流层爆发性增温(SSW)过程为模拟个例进行了SABER和MLS臭氧观测同化试验,得出以下结论:同化SABER和MLS臭氧体积浓度观测得出的WACCM+DART臭氧分析场能够较真实反映SSW期间北极上空平流层臭氧廓线随时间的演变特征,且与ERA5(Fifth Generation of ECMWF Reanalyses)再分析资料描述的臭氧变化特征具有很好的一致性;基于SABER和MLS臭氧观测的WACCM臭氧6 h预报检验表明同化臭氧观测对臭氧分析和预报误差的改善效果主要体现在南半球高纬平流层和北半球中高纬平流层中上层—中间层底部;基于ERA5再分析资料的WACCM+DART分析场检验表明同化SABER和MLS臭氧体积浓度资料可在提高北半球高纬地区上平流层—中间层底部臭氧场分析质量的同时减小该地区上平流层—中间层底部温度场和中间层底部纬向风场的分析误差;基于MLS臭氧资料的臭氧中期预报检验表明相对控制试验同化SABER和MLS臭氧体积浓度资料能更好改善0~5 d下平流层和中间层底部臭氧的预报效果。
文摘The infrared transmittance and emissivity of heat-insulating coatings pigmented with various structural particles were studied using Kubelka-Munk theory and Mie theory. The primary design purpose was to obtain the low transmittance and low emissivity coatings to reduce the heat transfer by thermal radiation for high-temperature applications. In the case of silica coating layers constituted with various structural titania particles （solid, hollow, and core-shell spherical）, the dependence of transmittance and emissivity of the coating layer on the particle structure and the layer thickness was investigated and optimized. The results indicate that the coating pigmented with core-shell titania particles exhibits a lower infrared transmittance and a lower emissivity value than that with other structural particles and is suitable to radiative heat-insulating applications.
基金supported by the National Natural Science Foundation of China under Grant Nos.51772027 and 51972089。
文摘LaMgAl_(11)O_(19)(LMA),characterized by high melting point,low density and thermal conductivity as well as good infrared emissivity,is regarded as a potential candidate for the thermal protection of hypersonic vehicles.Nevertheless,the unsatisfied phase stability at high temperature results in declining of the emissivity below 6μm,which limits the extensive applications of LaMgAl_(11)O_(19).In order to overcome this obstacle,three dense bulk high-entropy ceramics,(La_(0.2)Nd_(0.2)Gd_(0.2)Sm_(0.2)Pr_(0.2))MgAl_(11)O_(19)(HE LMA-1),(La_(0.2)Nd_(0.2)Gd_(0.2)Sm_(0.2)Dy_(0.2))Mg Al_(11)O_(19)(HE LMA-2)and La(Mg_(0.2)Fe_(0.2)Co_(0.2)Ni_(0.2)Zn_(0.2))Al_(11)O_(19)(HE LMA-3),were designed and successfully prepared through solid state reaction at 1700℃for 4 h in one step.XRD analyses show that the phase compositions of HE LMA-1,HE LMA-2 and HE LMA-3 are single-phase solid solutions with the relative density of 95.61%,95.49%and 94.31%,respectively.Heat treatment experiments demonstrate that the phase composition of HE LMA-1 remains a single phase after high-temperature heating,while second phase appears in other two samples.The stability of HE LMA-1 is attributed to small average size differenceδ(~4%)of constitute elements.Intriguingly,the average emissivity of HE LMA-1 in the range of 3-6μm reaches 0.9,which is significantly higher than that of LMA and other two HE LMA samples.The emissivity of all samples remains above 0.95 from 6 to 10μm.In the far infrared region(10-14μm),although the emissivity of these specimens decreases slightly,it still exceeds 0.85.The UV-Vis absorption spectra indicate that the formation of many discrete impurity energy levels with small intervals in HE LMA-1 promotes the f electrons to transit between adjacent impurity energy levels and conduction band,which enhances the infrared emission of HE LMA-1 below 6μm.In a word,with improved phase stability and thermal emissivity in infrared range,high-entropy REMgAl_(11)O_(19),especially(La_(0.2)Nd_(0.2)Gd_(0.2)Sm_(0.2)Pr_(0.2))MgAl_(11)O_(19)(HE LMA-1),is a promising candidate in thermal protection coatings of hypersonic vehicles.
基金sponsored by the National Natural Science Foundation of China (Grant No. 41265002, 41130641, and 41175140)the Special Fund for Meteorology-scientific Research in the Public Interest of China (Grant No. GYHY201306066)
文摘An accurate accounting of land surface emissivity(ε) is important both for the retrieval of surface temperatures and the calculation of the longwave surface energy budgets.Since ε is one of the important parameterizations in land surface models(LSMs),accurate accounting also improves the accuracy of surface temperatures and sensible heat fluxes simulated by LSMs.In order to obtain an accurate emissivity,this paper focuses on estimating ε from data collected in the hinterland of Taklimakan Desert by two different methods.In the first method,ε was derived from the surface broadband emissivity in the 8–14 μm thermal infrared atmospheric window,which was determined from spectral radiances observed by field measurements using a portable Fourier transform infrared spectrometer,the mean ε being 0.9051.The second method compared the observed and calculated heat fluxes under nearneutral atmospheric stability and estimated ε indirectly by minimizing the root-mean-square difference between them.The result of the second method found a mean value of 0.9042,which is consistent with the result by the first method.Although the two methods recover ε from different field experiments and data,the difference of meanvalues is 0.0009.The first method is superior to the indirect method,and is also more convenient.
基金Funded by the Scientific and Technological Research Projects for Education Department of Hubei Province(Q20161407)
文摘NiCr2O4（NCO）spinel composites with different Mn/Ni atomic ratios（Mn/Ni=0.05,0.10,0.15,and 0.20）were synthesized via solid state reaction method.Phase compositions and microstructure of samples were characterized by X-ray diffraction（XRD）and X-ray photoelectron spectroscopy（XPS）.The TG-DSC curves showed that the appropriate baking temperature for Mn-doped NCO spinel preparation was approximately 1 320℃.X-ray diffraction patterns exhibited the formation of NCO spinel with Fd-3m space group.Valence state of the Mn ions was determined from 2p and 3s X-ray photoelectron spectra.Manganese ions were mostly in divalent and trivalent states,and the ratio of Mn^2＋/Mn^3＋was 0.78-0.98.Fourier transform infrared spectroscopy（FTIR）was used to analyze the spectral emissivity of Mn doped NCO spinel.It was revealed that the infrared emissivity of Mn-doped NCO spinel in 1.8-5μm could be significantly enhanced with increasing content of Mn^2＋,reaching as high as 0.9398.Mn-doped NCO spinel showed excellent radiation performance and good prospect in high emissivity applications in the temperature range of 800-1 200℃.
基金This work was financially supported by the National Natu-ral Science Foundation of China(Nos.51972082,51972089,and 52172041)the Key Program of National Natural Science Foun-dation of China(No.52032003).
文摘Transition metal disilicides are widely used as heating elements and infrared emission coatings.However,the limited intrinsic infrared emissivity and high thermal conductivity are the main limitations to their applications as infrared emission coatings in the thermal protection system.To cope with these prob-lems,four medium and high-entropy transition metal disilicides,i.e.,(V_(0.25)Ta_(0.25)Mo_(0.25)W_(0.25))Si_(2)(ME-1),(Nb_(0.25)Ta_(0.25)Mo_(0.25)W_(0.25))Si_(2)(ME-2),(V_(0.2)Nb_(0.2)Ta_(0.2)Mo_(0.2)W_(0.2))Si_(2)(HE-1),and(Cr_(0.2)Nb_(0.2)Ta_(0.2)Mo_(0.2)W_(0.2))Si_(2)(HE-2),were designed and synthesized by spark plasma sintering method using transition metal binary disilicides as precursors.The introduction of multi-elements into transition metal disilicides not only im-proved the infrared emissivity but also reduced the electrical and thermal conductivity.Among them,(Cr_(0.2)Nb_(0.2)Ta_(0.2)Mo_(0.2)W_(0.2))Si_(2)(HE-2)had the lowest electrical conductivity of 3789 S cm-1,which is over one order of magnitude lower than that of MoSi_(2)(50000 S cm^(-1)),and total infrared emissivity of 0.42 at room temperature,which is nearly double of that of TaSi_(2).Benefiting from low electrical conductivity and phonon scattering due to lattice distortion,the medium and high-entropy transition metal disilicides also demonstrated a significant decline in thermal conductivity compared to their binary counterparts.Of all samples,HE-2 exhibited the lowest thermal conductivity of 6.4 W m^(−1)K^(−1).The high-entropy tran-sition metal disilicides also present excellent oxidation resistance at high temperatures.The improved infrared emissivity,reduced thermal conductivity,excellent oxidation resistance,and lower densities of these medium and high-entropy transition metal disilicides portend that they are promising as infrared emission coating materials for applications in thermal protection systems.
基金the Fundamental Research Foundation of Harbin Engineering University, (grant number HEUF 04017)
文摘A type of combined optical fiber interferometric acoustic emission sensor is proposed. The sensor can be independent on the laser source and make light interference by matching the lengths of two arms,so it can be used to monitor the health of large structure. Theoretical analyses indicate that the system can be equivalent to the Michelson interferometer with two optical fiber loop reflectors,and its sensitivity has been remarkably increased because of the decrease of the losses of light energy. PZT is powered by DC regulator to control the operating point of the system,so the system can accurately detect feeble vibration which is generated by ultrasonic waves propagating on the surface of solid. The amplitude and the frequency of feeble vibration signal are obtained by detecting the output light intensity of interferometer and using Fourier transform technique. The results indicate that the system can be used to detect the acoustic emission signals by the frequency characteristics.
