The azimuthal distributions of final-state particles and fragments produced in high-energy nucleus-nucleus collisions are described by a modified multisource ideal gas model which contains the expansions and movements...The azimuthal distributions of final-state particles and fragments produced in high-energy nucleus-nucleus collisions are described by a modified multisource ideal gas model which contains the expansions and movements of the emission sources. The transverse structures of the sources are given in the transverse plane by momentum components Px and Py, and described by parameters in the model. The results of the azimuthal distributions, calculated by the Monte Carlo method, are in good agreement with the experimental data in nucleus-nucleus collisions at high energies.展开更多
I will review some key aspects of the physical conditions of the line emitting regions in AGN. The innermost BLR extends at radii of light days to light weeks from the central ionizing source. There are strong indicat...I will review some key aspects of the physical conditions of the line emitting regions in AGN. The innermost BLR extends at radii of light days to light weeks from the central ionizing source. There are strong indications that the BLR clouds are connected to the outer region of an accretion disk. Trends of radial acceleration of the line emitting clouds have been found in the extended narrow line region. Ⅰ will concentrate on observations taken in the optical wavelength range. Finally, Ⅰ will discuss different methods to determine the mass of the central supermassive black hole from the emission lines.展开更多
We investigate metallic microdisk-size dependence of quantum dot （QD） spontaneous emission rate and micro- antenna directional emission effect for the hybrid metM-distributed Bragg reflector structures based on a pa...We investigate metallic microdisk-size dependence of quantum dot （QD） spontaneous emission rate and micro- antenna directional emission effect for the hybrid metM-distributed Bragg reflector structures based on a particular single QD emission. It is found that the measured photolumineseence （PL） intensity is very sensitive to the size of metMlic disk, showing an enhancement factor of 11 when the optimal disk diameter is 2μm and the numerical aperture of microscope objective NA=0.5. It is found that for large metal disks, the Purcell effect is dominant for enhanced PL intensity, whereas for small size disks the main contribution comes from plasmon scattering at the disk edge within the light cone collected by the microscope objective.展开更多
Analyzing determinants that influence polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran（PCDD/F） emissions is helpful for decision-makers to find effective and efficient ways to mitigate PCDD/F emissi...Analyzing determinants that influence polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran（PCDD/F） emissions is helpful for decision-makers to find effective and efficient ways to mitigate PCDD/F emissions. The PCDD/F emissions and the contributions of the scale effect, structure effect and technology effect to emissions from eight main industrial sectors in2006, 2008 and 2010 in Shandong Province, were calculated in this article. Total PCDD/F emissions in Shandong increased by 52.8% in 2008（614.1 g I-TEQ） and 49.7% in 2010（601.8 g I-TEQ） based on 2006（401.9 g I-TEQ）. According to the decomposition method, the largest influencing factor on PCDD/F emission changes was the composition effect（contributed 43.4%in 2008 and 120.6% in 2010 based on 2006）, which was also an emission-increasing factor.In this case, the present industrial restructuring policy should be adjusted to control the proportion of production capacities with high emission factors, such as iron ore sintering and steelmaking and the secondary non-ferrous metal sector. The scale effect increased the emissions in 2008（contributed 21.9%） and decreased the emissions in 2010（contributed-28.0%）. However, as a source control measure, the excess capacity control policy indeed had a significant role in emission reduction. The main reason for the technology effect（contributed 34.7% in 2008 and 7.4% in 2010 based on 2006） having an emission-increasing role was the weakness in implementing policies for restricting industries with outdated facilities. Some specific suggestions were proposed on PCDD/F reduction for local administrators at the end.展开更多
A cuprous mononuclear copper complex [Cu（adpypz）CH3CNPPh3]BF4·CH2Cl2（1, adpypz = 9,9-dimethyl-10-（6-（3-phenyl-1H-pyrazol-1-yl）pyridin-2-yl）-9,10-dihydroacridine） was synthesized and characterized by Eleme...A cuprous mononuclear copper complex [Cu（adpypz）CH3CNPPh3]BF4·CH2Cl2（1, adpypz = 9,9-dimethyl-10-（6-（3-phenyl-1H-pyrazol-1-yl）pyridin-2-yl）-9,10-dihydroacridine） was synthesized and characterized by Elemental Analysis, NMR, UV-Vis and X-ray single-crystal structure analysis. It crystallizes in triclinic, space group P1 with a = 11.3388（4）, b = 13.4569（4）, c = 16.2561（6） ？, α = 97.154（3）, β = 92.187（3）, γ = 114.119（4）°, V = 2235.38（13） ？3, Z = 2, Mr = 967.12, Dc = 1.437 g/cm^3, F（000） = 996, μ = 2.62 mm^–1, GOOF = 1.031, the final R = 0.0417, and w R = 0.1024 for 8043 observed reflections with I 〉 2σ（I）. The Cu（I） atoms in the complex are four-coordinated and adopt a tetrahedral coordination geometry. In the solid state, the complex exhibits bluish-green photoluminescence with emission peaks λmax = 492 nm（1）, lifetimes 235 μs and quantum yields（ф = 0.279） at room temperature. The studies of varied temperature emission spectra and decay behaviours of the complex indicate that the complex displays thermally activated delayed fluorescence（TADF） at room temperature. The results of the experimental and DFT calculations suggest that the emission in the solid state originates from the ILCT excited states.展开更多
This paper provides a computation on both the China＇s aggregate CO2 emission volume and the emission of each sector over the period of 2002-2007, based on the input-output analysis. Further analysis is also given on ...This paper provides a computation on both the China＇s aggregate CO2 emission volume and the emission of each sector over the period of 2002-2007, based on the input-output analysis. Further analysis is also given on the various determinants of the change in the emission volume, with the aid of structural decomposition analysis （SDA） based on a residual-free method. Based on the input-output table of China in 2002 and 2007, the merge of sectors and the adjustment of price change have been made during the study. The emissions of carbon dioxide in China increased from 2,887.3 million ton to 5,664.6 million ton during 2002-2007. The average rate of increase is 13.3%, faster than the average rate of gross domestic product （GDP） growth 11.6% slightly. According to the process of SDA, the changes in emission are analyzed in terms of four different factors. Among the four factors studied in the paper, it is found that the change of emission intensity and structure of demand are the main reason of the decrease of emission, while production technology and scale effect increase the emission volume. The paper also finds that although the direct emission intensity decreased during the study period, the total emission intensity increased with the annual rate of 3.8%, which reflects the result of energy policy is not equal in different sectors.展开更多
A cuprous dinuclear copper complex [PPh_2PAr_2Cu（μ-SCN）_2CuPPh_2PAr_2]（1,PPh_2PAr_2 =（1-bis（2-methylphenyl）-phosphine-2-diphenylphosphino）benzene） was synthesized from the reaction of Cu SCN and PPh_2PAr_2 in...A cuprous dinuclear copper complex [PPh_2PAr_2Cu（μ-SCN）_2CuPPh_2PAr_2]（1,PPh_2PAr_2 =（1-bis（2-methylphenyl）-phosphine-2-diphenylphosphino）benzene） was synthesized from the reaction of Cu SCN and PPh_2PAr_2 in CH_3CN at room temperature. The compound was characterized by Elemental Analysis,NMR,UV-Vis and X-ray single-crystal structure analysis. It crystallizes in triclinic,space group P1 with a = 10.225（2）,b = 11.360（2）,c = 13.420（3） ？,α = 95.81（3）,β = 93.45（3）,γ = 113.78（3）°,V = 1410.4（5） ？~3,Z = 1,Mr = 1192.21,Dc = 1.404 g/cm^3,F（000） = 616,μ = 3.029 mm^（–1）,GOOF = 1.052,the final R = 0.0359,and w R = 0.0964 for 4878 observed reflections with I 〉 2σ（I）. The Cu（I） atoms in the complex are four-coordinated and adopt a tetrahedral coordination geometry. The copper centers in the molecular structure are bridged by two thiocyanate anions and each Cu（I） is chelated further terminally by a PPh_2PAr_2 ligand. The [Cu（μ-SCN）_2Cu] cores have essential planar configurations. In the solid state,the complex exhibits blue photoluminescence with emission peaks λ_（max）= 478 nm（1）,lifetimes 4.7 μs and quantum yields（ф = 0.43） at room temperature. The studies of varied temperature emission spectra and decay behaviours of the complex indicate that it displays thermally activated delayed fluorescence at room temperature. The results of the experimental and DFT calculations suggest that the emission in the solid state originates from the ^（1,3）MLCT excited states.展开更多
An ionic iridium（Ⅲ） complex[Ir（F2dpyb）（bzdpp）2Cl][OTf]with 1,3-difluoro-4,6-di（2-pyridinyl） benzene（F2dpybH） terdentate ligand and benzyldiphenylphosphine（bzdpp）ligand was synthesized and characterized.Th...An ionic iridium（Ⅲ） complex[Ir（F2dpyb）（bzdpp）2Cl][OTf]with 1,3-difluoro-4,6-di（2-pyridinyl） benzene（F2dpybH） terdentate ligand and benzyldiphenylphosphine（bzdpp）ligand was synthesized and characterized.The structure of iridium complex was verified by single-crystal X-ray crystallography.It crystallizes in monoclinic,space group P21/n with a =14.3654（7）,b = 23.0026（10）,c = 15.7964（7） A°,β = 97.6029（11）,V= 5173.9（4） A°3,Z = 4,F（000） =2552,Dc = 1.645 Mg/m^3,Mr = 1281.49 and μ = 0.071 mm^-1.The UV-vis absorption and phosphorescence of the complex were discussed.The complex was ＇aggregation induced emission（AIE）＇ active.It exhibited no emission in CH2Cl2 solution but strong blue-green emission in solid state under ultraviolet light excitation.The complex emitted a strong phosphorescence centered at493 nm when doped in PMMA.Its lifetime is 0.755 μs and quantum yield is approximately 0.134.展开更多
By combining the advantages of effcient damping and high mechanical properties,Ni-Mn-Ga particle composites have a very good prospect for applications in damping structure design.In this paper,a ferromagnetic shape me...By combining the advantages of effcient damping and high mechanical properties,Ni-Mn-Ga particle composites have a very good prospect for applications in damping structure design.In this paper,a ferromagnetic shape memory alloy Ni-Mn-Ga composite is prepared.Ni-Mn-Ga particle/bisphenol-A epoxy composite cantilever beam vibration tests under a magnetic feld and without the magnetic feld are conducted to analyze the structural damping ratios n.Meanwhile,the damping characteristics of the Ni-Mn-Ga composite are studied through the axial loading-unloading method and the acoustic emission signals method.The damping coeffcient of the composite for different Ni-Mn-Ga volume fractions is obtained.The interface properties of the composite are discussed by micro examination and axial loading.The relationships between the damping of the composite and that of the component materials are discussed.The specifc damping capacity（SDC）and acoustic emission counts diagram of different specimens with different Ni-Mn-Ga volume fractions are analyzed.展开更多
Based on mode acoustic emission theory,the paper analyses the acoustic emission analog signal of thin steel plate using matching pursuit,then obtains the characteristics interpretation of the different frequency signa...Based on mode acoustic emission theory,the paper analyses the acoustic emission analog signal of thin steel plate using matching pursuit,then obtains the characteristics interpretation of the different frequency signal energy concentration degree; Combined with four-point arc positioning method,the papers researches the damage localization of the plate-like structure. Simulation experiment shows that this method can accurately detect and locate the damage. This can provide data support for further imaging research based on time reverse theory.展开更多
基金Project supported by the National Natural Science Foundation of China （Grant Nos 10275042 and 10475054）, the Shanxi Provincial Natural Science Foundation （Grant No 20021006）, and the Shanxi Provincial 1Foundation for Returned 0verseas Scholars.
文摘The azimuthal distributions of final-state particles and fragments produced in high-energy nucleus-nucleus collisions are described by a modified multisource ideal gas model which contains the expansions and movements of the emission sources. The transverse structures of the sources are given in the transverse plane by momentum components Px and Py, and described by parameters in the model. The results of the azimuthal distributions, calculated by the Monte Carlo method, are in good agreement with the experimental data in nucleus-nucleus collisions at high energies.
文摘I will review some key aspects of the physical conditions of the line emitting regions in AGN. The innermost BLR extends at radii of light days to light weeks from the central ionizing source. There are strong indications that the BLR clouds are connected to the outer region of an accretion disk. Trends of radial acceleration of the line emitting clouds have been found in the extended narrow line region. Ⅰ will concentrate on observations taken in the optical wavelength range. Finally, Ⅰ will discuss different methods to determine the mass of the central supermassive black hole from the emission lines.
基金Supported by the National Key Basic Research Program of China under Grant No 2013CB922304the National Natural Science Foundation of China under Grant Nos 11474275 and 11464034
文摘We investigate metallic microdisk-size dependence of quantum dot （QD） spontaneous emission rate and micro- antenna directional emission effect for the hybrid metM-distributed Bragg reflector structures based on a particular single QD emission. It is found that the measured photolumineseence （PL） intensity is very sensitive to the size of metMlic disk, showing an enhancement factor of 11 when the optimal disk diameter is 2μm and the numerical aperture of microscope objective NA=0.5. It is found that for large metal disks, the Purcell effect is dominant for enhanced PL intensity, whereas for small size disks the main contribution comes from plasmon scattering at the disk edge within the light cone collected by the microscope objective.
基金financed primarily by the International Science & Technology Cooperation Program of China (No. 2012DFA91150)the Chinese Academy of Sciences under Grant No. KZZD-EW-TZ-12the National Natural Science Foundation of China (No. 41371488, 41171394)
文摘Analyzing determinants that influence polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran（PCDD/F） emissions is helpful for decision-makers to find effective and efficient ways to mitigate PCDD/F emissions. The PCDD/F emissions and the contributions of the scale effect, structure effect and technology effect to emissions from eight main industrial sectors in2006, 2008 and 2010 in Shandong Province, were calculated in this article. Total PCDD/F emissions in Shandong increased by 52.8% in 2008（614.1 g I-TEQ） and 49.7% in 2010（601.8 g I-TEQ） based on 2006（401.9 g I-TEQ）. According to the decomposition method, the largest influencing factor on PCDD/F emission changes was the composition effect（contributed 43.4%in 2008 and 120.6% in 2010 based on 2006）, which was also an emission-increasing factor.In this case, the present industrial restructuring policy should be adjusted to control the proportion of production capacities with high emission factors, such as iron ore sintering and steelmaking and the secondary non-ferrous metal sector. The scale effect increased the emissions in 2008（contributed 21.9%） and decreased the emissions in 2010（contributed-28.0%）. However, as a source control measure, the excess capacity control policy indeed had a significant role in emission reduction. The main reason for the technology effect（contributed 34.7% in 2008 and 7.4% in 2010 based on 2006） having an emission-increasing role was the weakness in implementing policies for restricting industries with outdated facilities. Some specific suggestions were proposed on PCDD/F reduction for local administrators at the end.
基金supported by the National Natural Science Foundation of China(51172232)
文摘A cuprous mononuclear copper complex [Cu（adpypz）CH3CNPPh3]BF4·CH2Cl2（1, adpypz = 9,9-dimethyl-10-（6-（3-phenyl-1H-pyrazol-1-yl）pyridin-2-yl）-9,10-dihydroacridine） was synthesized and characterized by Elemental Analysis, NMR, UV-Vis and X-ray single-crystal structure analysis. It crystallizes in triclinic, space group P1 with a = 11.3388（4）, b = 13.4569（4）, c = 16.2561（6） ？, α = 97.154（3）, β = 92.187（3）, γ = 114.119（4）°, V = 2235.38（13） ？3, Z = 2, Mr = 967.12, Dc = 1.437 g/cm^3, F（000） = 996, μ = 2.62 mm^–1, GOOF = 1.031, the final R = 0.0417, and w R = 0.1024 for 8043 observed reflections with I 〉 2σ（I）. The Cu（I） atoms in the complex are four-coordinated and adopt a tetrahedral coordination geometry. In the solid state, the complex exhibits bluish-green photoluminescence with emission peaks λmax = 492 nm（1）, lifetimes 235 μs and quantum yields（ф = 0.279） at room temperature. The studies of varied temperature emission spectra and decay behaviours of the complex indicate that the complex displays thermally activated delayed fluorescence（TADF） at room temperature. The results of the experimental and DFT calculations suggest that the emission in the solid state originates from the ILCT excited states.
文摘This paper provides a computation on both the China＇s aggregate CO2 emission volume and the emission of each sector over the period of 2002-2007, based on the input-output analysis. Further analysis is also given on the various determinants of the change in the emission volume, with the aid of structural decomposition analysis （SDA） based on a residual-free method. Based on the input-output table of China in 2002 and 2007, the merge of sectors and the adjustment of price change have been made during the study. The emissions of carbon dioxide in China increased from 2,887.3 million ton to 5,664.6 million ton during 2002-2007. The average rate of increase is 13.3%, faster than the average rate of gross domestic product （GDP） growth 11.6% slightly. According to the process of SDA, the changes in emission are analyzed in terms of four different factors. Among the four factors studied in the paper, it is found that the change of emission intensity and structure of demand are the main reason of the decrease of emission, while production technology and scale effect increase the emission volume. The paper also finds that although the direct emission intensity decreased during the study period, the total emission intensity increased with the annual rate of 3.8%, which reflects the result of energy policy is not equal in different sectors.
基金supported by the National Natural Science Foundation of China(51172232)
文摘A cuprous dinuclear copper complex [PPh_2PAr_2Cu（μ-SCN）_2CuPPh_2PAr_2]（1,PPh_2PAr_2 =（1-bis（2-methylphenyl）-phosphine-2-diphenylphosphino）benzene） was synthesized from the reaction of Cu SCN and PPh_2PAr_2 in CH_3CN at room temperature. The compound was characterized by Elemental Analysis,NMR,UV-Vis and X-ray single-crystal structure analysis. It crystallizes in triclinic,space group P1 with a = 10.225（2）,b = 11.360（2）,c = 13.420（3） ？,α = 95.81（3）,β = 93.45（3）,γ = 113.78（3）°,V = 1410.4（5） ？~3,Z = 1,Mr = 1192.21,Dc = 1.404 g/cm^3,F（000） = 616,μ = 3.029 mm^（–1）,GOOF = 1.052,the final R = 0.0359,and w R = 0.0964 for 4878 observed reflections with I 〉 2σ（I）. The Cu（I） atoms in the complex are four-coordinated and adopt a tetrahedral coordination geometry. The copper centers in the molecular structure are bridged by two thiocyanate anions and each Cu（I） is chelated further terminally by a PPh_2PAr_2 ligand. The [Cu（μ-SCN）_2Cu] cores have essential planar configurations. In the solid state,the complex exhibits blue photoluminescence with emission peaks λ_（max）= 478 nm（1）,lifetimes 4.7 μs and quantum yields（ф = 0.43） at room temperature. The studies of varied temperature emission spectra and decay behaviours of the complex indicate that it displays thermally activated delayed fluorescence at room temperature. The results of the experimental and DFT calculations suggest that the emission in the solid state originates from the ^（1,3）MLCT excited states.
基金Supported by the National Natural Science Foundation of China(21572001)the Natural Science Foundation from Bureau of Education of Anhui Province(KJ2013A063)the Anhui Province Undergraduate Innovation and Entrepreneurship Training Program(201510360119)
文摘An ionic iridium（Ⅲ） complex[Ir（F2dpyb）（bzdpp）2Cl][OTf]with 1,3-difluoro-4,6-di（2-pyridinyl） benzene（F2dpybH） terdentate ligand and benzyldiphenylphosphine（bzdpp）ligand was synthesized and characterized.The structure of iridium complex was verified by single-crystal X-ray crystallography.It crystallizes in monoclinic,space group P21/n with a =14.3654（7）,b = 23.0026（10）,c = 15.7964（7） A°,β = 97.6029（11）,V= 5173.9（4） A°3,Z = 4,F（000） =2552,Dc = 1.645 Mg/m^3,Mr = 1281.49 and μ = 0.071 mm^-1.The UV-vis absorption and phosphorescence of the complex were discussed.The complex was ＇aggregation induced emission（AIE）＇ active.It exhibited no emission in CH2Cl2 solution but strong blue-green emission in solid state under ultraviolet light excitation.The complex emitted a strong phosphorescence centered at493 nm when doped in PMMA.Its lifetime is 0.755 μs and quantum yield is approximately 0.134.
基金supported by the National Natural Science Foundation of China (No:10972021)
文摘By combining the advantages of effcient damping and high mechanical properties,Ni-Mn-Ga particle composites have a very good prospect for applications in damping structure design.In this paper,a ferromagnetic shape memory alloy Ni-Mn-Ga composite is prepared.Ni-Mn-Ga particle/bisphenol-A epoxy composite cantilever beam vibration tests under a magnetic feld and without the magnetic feld are conducted to analyze the structural damping ratios n.Meanwhile,the damping characteristics of the Ni-Mn-Ga composite are studied through the axial loading-unloading method and the acoustic emission signals method.The damping coeffcient of the composite for different Ni-Mn-Ga volume fractions is obtained.The interface properties of the composite are discussed by micro examination and axial loading.The relationships between the damping of the composite and that of the component materials are discussed.The specifc damping capacity（SDC）and acoustic emission counts diagram of different specimens with different Ni-Mn-Ga volume fractions are analyzed.
基金supported by the Natural Science Foundation of Naval University of Engineering(under Grant No.HGDYDJJ13152)
文摘Based on mode acoustic emission theory,the paper analyses the acoustic emission analog signal of thin steel plate using matching pursuit,then obtains the characteristics interpretation of the different frequency signal energy concentration degree; Combined with four-point arc positioning method,the papers researches the damage localization of the plate-like structure. Simulation experiment shows that this method can accurately detect and locate the damage. This can provide data support for further imaging research based on time reverse theory.
