With the development of Ethernet systems and the growing capacity of modem silicon technology, embedded communication networks are playing an increasingly important role in embedded and safety critical systems. Hardwa...With the development of Ethernet systems and the growing capacity of modem silicon technology, embedded communication networks are playing an increasingly important role in embedded and safety critical systems. Hardware/software co-design is a methodology for solving design problems in processor based embedded systems. In this work, we implemented a new 1-cycle pipeline microprocessor and a fast Ethemet transceiver and established a low cost, high performance embedded network controller, and designed a TCP/IP stack to access the Intemet. We discussed the hardware/software architecture in the forepart, and then the whole system-on-a-chip on Altera Stratix EP1S25F780C6 device. Using the FPGA environment and SmartBit tester, we tested the system＇s throughput. Our simulation results showed that the maximum throughput of Ethemet packets is up to 7 Mbps, that of UDP packets is up to 5.8 Mbps, and that of TCP packets is up to 3.4 Mbps, which showed that this embedded system can easily transmit basic voice and video signals through Ethemet, and that using only one chip can realize that many electronic devices access to the Intemet directly and get high performance.展开更多
In order to solve the problems of mining monitor and control systems during the construction process of digital mining combined with network and embedded technologies, the kernel access equipment of a mining monitor a...In order to solve the problems of mining monitor and control systems during the construction process of digital mining combined with network and embedded technologies, the kernel access equipment of a mining monitor and control system was proposed and designed. It is the architecture of a mining embedded network multifunctional substation. This paper presents the design of hardware and software of the substation in detail. Finally, the system’s ef- ficiency was validated through experimentation.展开更多
Embedded Ethernet technology has been utilized increasingly widely as the communication mode in the substation automation system(SAS).This paper introduces the current applying situation about embedded Ethernet in SAS...Embedded Ethernet technology has been utilized increasingly widely as the communication mode in the substation automation system(SAS).This paper introduces the current applying situation about embedded Ethernet in SAS First.After analyzing the protocol levels used in SAS based on embedded Ethernet and the differences between the TCP and UDP,UDP/IP is selected as the communication protocol between the station-level and bay-level devices for its real-time characteristic.Then a new kind of implementation of the embedded Ethernet is presented based on hardware protocol stack.The designed scheme can be implemented easily,reduce cost significantly and shorten developing cycle.展开更多
Thrust estimation is a significant part of aeroengine thrust control systems.The traditional estimation methods are either low in accuracy or large in computation.To further improve the estimation effect,a thrust esti...Thrust estimation is a significant part of aeroengine thrust control systems.The traditional estimation methods are either low in accuracy or large in computation.To further improve the estimation effect,a thrust estimator based on Multi-layer Residual Temporal Convolutional Network(M-RTCN)is proposed.To solve the problem of dead Rectified Linear Unit(ReLU),the proposed method uses the Gaussian Error Linear Unit(GELU)activation function instead of ReLU in residual block.Then the overall architecture of the multi-layer convolutional network is adjusted by using residual connections,so that the network thrust estimation effect and memory consumption are further improved.Moreover,the comparison with seven other methods shows that the proposed method has the advantages of higher estimation accuracy and faster convergence speed.Furthermore,six neural network models are deployed in the embedded controller of the micro-turbojet engine.The Hardware-in-the-Loop(HIL)testing results demonstrate the superiority of M-RTCN in terms of estimation accuracy,memory occupation and running time.Finally,an ignition verification is conducted to confirm the expected thrust estimation and real-time performance.展开更多
We theoretically explore the manipulation of a temporal electron-spin splitter by aδ-potential in an embedded magnetic-elec tric-barrier micro structure(EMEBM),which is constructed by patterning a ferromagnetic strip...We theoretically explore the manipulation of a temporal electron-spin splitter by aδ-potential in an embedded magnetic-elec tric-barrier micro structure(EMEBM),which is constructed by patterning a ferromagnetic stripe and a Schottky-metal stripe on the top and bottom of an InAs/Al_(x)In_(1-x)As heterostructure,respectively.Spin polarization of the dwell time remains,even though aδ-potential is inserted by atomic-layer doping.Both the magnitude and sign of the spinpolarized dwell time can be manipulated by changing the weight or position of the 6-potential.Thus,a structurally controllable temporal electron-spin splitter can be obtained for spintronics device applications.展开更多
To avoid colliding with trees during its operation,a lawn mower robot must detect the trees.Existing tree detection methods suffer from low detection accuracy(missed detection)and the lack of a lightweight model.In th...To avoid colliding with trees during its operation,a lawn mower robot must detect the trees.Existing tree detection methods suffer from low detection accuracy(missed detection)and the lack of a lightweight model.In this study,a dataset of trees was constructed on the basis of a real lawn environment.According to the theory of channel incremental depthwise convolution and residual suppression,the Embedded-A module is proposed,which expands the depth of the feature map twice to form a residual structure to improve the lightweight degree of the model.According to residual fusion theory,the Embedded-B module is proposed,which improves the accuracy of feature-map downsampling by depthwise convolution and pooling fusion.The Embedded YOLO object detection network is formed by stacking the embedded modules and the fusion of feature maps of different resolutions.Experimental results on the testing set show that the Embedded YOLO tree detection algorithm has 84.17%and 69.91%average precision values respectively for trunk and spherical tree,and 77.04% mean average precision value.The number of convolution parameters is 1.78×10^(6),and the calculation amount is 3.85 billion float operations per second.The size of weight file is 7.11MB,and the detection speed can reach 179 frame/s.This study provides a theoretical basis for the lightweight application of the object detection algorithm based on deep learning for lawn mower robots.展开更多
A new technique for designing a varactor-tunable frequency selective surface （FSS） with an embedded bias network is proposed and experimentally verified. The proposed FSS is based on a square-ring slot FSS. The freq...A new technique for designing a varactor-tunable frequency selective surface （FSS） with an embedded bias network is proposed and experimentally verified. The proposed FSS is based on a square-ring slot FSS. The frequency tuning is achieved by inserting varactor diodes between the square mesh and each unattached square patch. The square mesh is divided into two parts for biasing the varactor diodes. Full-wave numerical simulations show that a wide tuning range can be achieved by changing the capacitances of these loaded varactors. Two homo-type samples using fixed lumped capacitors are fabricated and measured using a standard waveguide measurement setup. Excellent agreement between the measured and simulated results is demonstrated.展开更多
A new-style remote monitoring system is proposed, which is based on enterprises' embedded web servers and can be widely used in enterprises' networked manufacturing systems. The principle and characteristics o...A new-style remote monitoring system is proposed, which is based on enterprises' embedded web servers and can be widely used in enterprises' networked manufacturing systems. The principle and characteristics of remote monitoring system based on embedded web server are analyzed. Such a kind of system for networked manufacturing is designed, and it proves efficient and feasible in promoting communication among enterprises, improving designing and scheduling, decreasing facility failure and reducing product cost.展开更多
Because of computational complexity,the deep neural network(DNN)in embedded devices is usually trained on high-performance computers or graphic processing units(GPUs),and only the inference phase is implemented in emb...Because of computational complexity,the deep neural network(DNN)in embedded devices is usually trained on high-performance computers or graphic processing units(GPUs),and only the inference phase is implemented in embedded devices.Data processed by embedded devices,such as smartphones and wearables,are usually personalized,so the DNN model trained on public data sets may have poor accuracy when inferring the personalized data.As a result,retraining DNN with personalized data collected locally in embedded devices is necessary.Nevertheless,retraining needs labeled data sets,while the data collected locally are unlabeled,then how to retrain DNN with unlabeled data is a problem to be solved.This paper proves the necessity of retraining DNN model with personalized data collected in embedded devices after trained with public data sets.It also proposes a label generation method by which a fake label is generated for each unlabeled training case according to users’feedback,thus retraining can be performed with unlabeled data collected in embedded devices.The experimental results show that our fake label generation method has both good training effects and wide applicability.The advanced neural networks can be trained with unlabeled data from embedded devices and the individualized accuracy of the DNN model can be gradually improved along with personal using.展开更多
One kind of combustible gas alarms based on industrial Ethernet was designed to prevent the gas leakage in industrial production sites, The alarm adopted the high performance microprocessor LPC2214 as the main chip. T...One kind of combustible gas alarms based on industrial Ethernet was designed to prevent the gas leakage in industrial production sites, The alarm adopted the high performance microprocessor LPC2214 as the main chip. The embedded operating system μC/OS-Ⅱand TCP/IP protocol stack uIP running on LPC2214 constitute a development platform of application of the combustible gas alarm, The test shows that it can automatically and continuously detect combustible gas in industrial production sites in several positions;it can give out sound-light alarm and take protective measures immediately against the gas leakage; and it can send the detected data to PC through the Ethernet interface to realize the remote detection. The designed project provides a reference to design industrial devices based on industrial Ethernet展开更多
This paper presents a new encryption embedded processor aimed at the application requirement of wireless sensor network （WSN）. The new encryption embedded processor not only offers Rivest Shamir Adlemen （RSA）, Adv...This paper presents a new encryption embedded processor aimed at the application requirement of wireless sensor network （WSN）. The new encryption embedded processor not only offers Rivest Shamir Adlemen （RSA）, Advanced Encryption Standard （AES）, 3 Data Encryption Standard （3 DES） and Secure Hash Algorithm 1 （SHA - 1 ） security engines, but also involves a new memory encryption scheme. The new memory encryption scheme is implemented by a memory encryption cache （MEC）, which protects the confidentiality of the memory by AES encryption. The experi- ments show that the new secure design only causes 1.9% additional delay on the critical path and cuts 25.7% power consumption when the processor writes data back. The new processor balances the performance overhead, the power consumption and the security and fully meets the wireless sensor environment requirement. After physical design, the new encryption embedded processor has been successfully tape-out.展开更多
A scheme of transmission control protocol/Internet protocol（TCP/IP） network system based on system-on-programmable chip（SOPC） is proposed for the embedded network communication. In this system, Nios processor, Eth...A scheme of transmission control protocol/Internet protocol（TCP/IP） network system based on system-on-programmable chip（SOPC） is proposed for the embedded network communication. In this system, Nios processor, Ethernet controller and other peripheral logic circuits are all integrated on a Stratix Ⅱ field programmable gate array （FPGA） chip by using SOPC builder design software. And the network communication is realized by transplanting MicroC/OS Ⅱ （uC/OS Ⅱ ） operation system and light weight Internet protocol（LwIP）. The design idea, key points and the structures of both software and hardware of the system are presented and ran with a telecommunication example. The experiment shows that the embedded TCP/IP network system has high reliability and real-time performance.展开更多
The interconnection of Solar PV to the Tarkwa Bulk Supply Point (BSP) has become necessary in order to provide additional capacity to meet the ever-increasing demand of Tarkwa and its environs during the day. The Sola...The interconnection of Solar PV to the Tarkwa Bulk Supply Point (BSP) has become necessary in order to provide additional capacity to meet the ever-increasing demand of Tarkwa and its environs during the day. The Solar PV Plant will support the Tarkwa BSP during the day. In this study, a grid impact analysis for the integration of Solar PV plant at three points of common coupling (PCC) at Tarkwa Bulk Supply Point’s (BSP) 33 kV network of the Electricity Company of Ghana was carried out. The three PCCs were Tarkwa BSP, Ghana Australia Gold (GAG) Substation and Darmang Substation. Simulations and detailed analysis were carried out with the use of CYME Software (Cyme 8.0 Rev 05). The Solar PV was integrated at varying penetration levels of 9 MWp, 11 MWp, 14 MWp, 16 MWp, 18 MWp, 20 MWp and 23 MWp (representing penetration levels of 40%, 50%, 60%, 70%, 80%, 90% and 100%, respectively) of the 2020 projected light demand of Tarkwa BSP 25.15 MVA network at an average power factor of 0.903. From the study, the optimum capacity of Solar PV power that could be connected is 9 MWp at an optimum inverter power factor of 0.94 lagging, and the GAG Substation was identified as the optimal location. The stiffness ratio at the optimal location was determined as 41.9, a figure which is far greater than the minimum standard value of 5, and gives an indication of very little voltage control problems in the operation of the proposed Solar PV interconnection. The integration of the optimum 9 MW Solar PV Plant to the Tarkwa network represents an additional 12.77% capacity, decreased the technical losses by 7.76%, and increased the voltage profile by 1.97%.展开更多
In order to achieve remote control problems for the intelligent home appliances, The paper presents a realization method through the Internet and GSM remote to control appliances of smart home, and given circuit. And ...In order to achieve remote control problems for the intelligent home appliances, The paper presents a realization method through the Internet and GSM remote to control appliances of smart home, and given circuit. And described in detail the hardware and software design of smart home appliances and their control method. Test results show that the system is stable and reliable.展开更多
In recent years, online engineering technologies are widely distributed and developed. Their influence on society is very strong. The Internet technology has provided additional opportunities for a new development lev...In recent years, online engineering technologies are widely distributed and developed. Their influence on society is very strong. The Internet technology has provided additional opportunities for a new development level of education, design and production. Associations and scientific conferences in the field of online engineering that appeared, seek to foster practices in education and research in higher education institutions and the industry on online engineering. A particular challenge for online engineering is how to extend the traditional equipments and laboratories to the Internet. A method of the embedded systems design with using online laboratory is described in this paper. Also, in this paper the experimental set of remote laboratory which allows carrying out hardware/software oriented design of the embedded control system of a mobile platform is considered.展开更多
In recent years,with the development of the natural language processing(NLP)technologies,security analyst began to use NLP directly on assembly codes which were disassembled from binary executables in order to examine...In recent years,with the development of the natural language processing(NLP)technologies,security analyst began to use NLP directly on assembly codes which were disassembled from binary executables in order to examine binary similarity,achieved great progress.However,we found that the existing frameworks often ignored the complex internal structure of instructions and didn’t fully consider the long-term dependencies of instructions.In this paper,we propose firmVulSeeker—a vulnerability search tool for embedded firmware images,based on BERT and Siamese network.It first builds a BERT MLM task to observe and learn the semantics of different instructions in their context in a very large unlabeled binary corpus.Then,a finetune mode based on Siamese network is constructed to guide training and matching semantically similar functions using the knowledge learned from the first stage.Finally,it will use a function embedding generated from the fine-tuned model to search in the targeted corpus and find the most similar function which will be confirmed whether it’s a real vulnerability manually.We evaluate the accuracy,robustness,scalability and vulnerability search capability of firmVulSeeker.Results show that it can greatly improve the accuracy of matching semantically similar functions,and can successfully find more real vulnerabilities in real-world firmware than other tools.展开更多
The hard target smart fuse of penetration ammunition is developing to be smaller, lighter, smarter and multifunction. After analyzing the characteristics of high-g accelerating signals and the penetration algorithms, ...The hard target smart fuse of penetration ammunition is developing to be smaller, lighter, smarter and multifunction. After analyzing the characteristics of high-g accelerating signals and the penetration algorithms, this paper provides a solution of penetration ammunition fuse system based on embedded technology. This fuse system realizes acquisition of the high-g accelerating signals and uses the appropriate penetration algorithms to process them. The fuse system can not only make the same type of penetration ammunition to attack different kinds of objects accurately, but also meet the other requirements of the function of penetration ammunition fuse system.展开更多
Recent advancements in autonomous vehicle technologies are transforming intelligent transportation systems.Artificial intelligence enables real-time sensing,decision-making,and control on embedded platforms with impro...Recent advancements in autonomous vehicle technologies are transforming intelligent transportation systems.Artificial intelligence enables real-time sensing,decision-making,and control on embedded platforms with improved efficiency.This study presents the design and implementation of an autonomous radio-controlled(RC)vehicle prototype capable of lane line detection,obstacle avoidance,and navigation through dynamic path planning.The system integrates image processing and ultrasonic sensing,utilizing Raspberry Pi for vision-based tasks and ArduinoNano for real-time control.Lane line detection is achieved through conventional image processing techniques,providing the basis for local path generation,while traffic sign classification employs a You Only Look Once(YOLO)model optimized with TensorFlow Lite to support navigation decisions.Images captured by the onboard camera are processed on the Raspberry Pi to extract lane geometry and calculate steering angles,enabling the vehicle to follow the planned path.In addition,ultrasonic sensors placed in three directions at the front of the vehicle detect obstacles and allow real-time path adjustment for safe navigation.Experimental results demonstrate stable performance under controlled conditions,highlighting the system’s potential for scalable autonomous driving applications.This work confirms that deep learning methods can be efficiently deployed on low-power embedded systems,offering a practical framework for navigation,path planning,and intelligent transportation research.展开更多
文摘With the development of Ethernet systems and the growing capacity of modem silicon technology, embedded communication networks are playing an increasingly important role in embedded and safety critical systems. Hardware/software co-design is a methodology for solving design problems in processor based embedded systems. In this work, we implemented a new 1-cycle pipeline microprocessor and a fast Ethemet transceiver and established a low cost, high performance embedded network controller, and designed a TCP/IP stack to access the Intemet. We discussed the hardware/software architecture in the forepart, and then the whole system-on-a-chip on Altera Stratix EP1S25F780C6 device. Using the FPGA environment and SmartBit tester, we tested the system＇s throughput. Our simulation results showed that the maximum throughput of Ethemet packets is up to 7 Mbps, that of UDP packets is up to 5.8 Mbps, and that of TCP packets is up to 3.4 Mbps, which showed that this embedded system can easily transmit basic voice and video signals through Ethemet, and that using only one chip can realize that many electronic devices access to the Intemet directly and get high performance.
文摘In order to solve the problems of mining monitor and control systems during the construction process of digital mining combined with network and embedded technologies, the kernel access equipment of a mining monitor and control system was proposed and designed. It is the architecture of a mining embedded network multifunctional substation. This paper presents the design of hardware and software of the substation in detail. Finally, the system’s ef- ficiency was validated through experimentation.
文摘Embedded Ethernet technology has been utilized increasingly widely as the communication mode in the substation automation system(SAS).This paper introduces the current applying situation about embedded Ethernet in SAS First.After analyzing the protocol levels used in SAS based on embedded Ethernet and the differences between the TCP and UDP,UDP/IP is selected as the communication protocol between the station-level and bay-level devices for its real-time characteristic.Then a new kind of implementation of the embedded Ethernet is presented based on hardware protocol stack.The designed scheme can be implemented easily,reduce cost significantly and shorten developing cycle.
基金co-supported by the National Natural Science Foundation of China(Nos.61890920,61890921)。
文摘Thrust estimation is a significant part of aeroengine thrust control systems.The traditional estimation methods are either low in accuracy or large in computation.To further improve the estimation effect,a thrust estimator based on Multi-layer Residual Temporal Convolutional Network(M-RTCN)is proposed.To solve the problem of dead Rectified Linear Unit(ReLU),the proposed method uses the Gaussian Error Linear Unit(GELU)activation function instead of ReLU in residual block.Then the overall architecture of the multi-layer convolutional network is adjusted by using residual connections,so that the network thrust estimation effect and memory consumption are further improved.Moreover,the comparison with seven other methods shows that the proposed method has the advantages of higher estimation accuracy and faster convergence speed.Furthermore,six neural network models are deployed in the embedded controller of the micro-turbojet engine.The Hardware-in-the-Loop(HIL)testing results demonstrate the superiority of M-RTCN in terms of estimation accuracy,memory occupation and running time.Finally,an ignition verification is conducted to confirm the expected thrust estimation and real-time performance.
基金supported by the Science and Technology Innovation Plan Project of Hunan Province in China(S2019JJQNJJ2177)the National Natural Science Foundation of China(11864009)。
文摘We theoretically explore the manipulation of a temporal electron-spin splitter by aδ-potential in an embedded magnetic-elec tric-barrier micro structure(EMEBM),which is constructed by patterning a ferromagnetic stripe and a Schottky-metal stripe on the top and bottom of an InAs/Al_(x)In_(1-x)As heterostructure,respectively.Spin polarization of the dwell time remains,even though aδ-potential is inserted by atomic-layer doping.Both the magnitude and sign of the spinpolarized dwell time can be manipulated by changing the weight or position of the 6-potential.Thus,a structurally controllable temporal electron-spin splitter can be obtained for spintronics device applications.
基金the National Natural Science Foundation of China (No.51275223)。
文摘To avoid colliding with trees during its operation,a lawn mower robot must detect the trees.Existing tree detection methods suffer from low detection accuracy(missed detection)and the lack of a lightweight model.In this study,a dataset of trees was constructed on the basis of a real lawn environment.According to the theory of channel incremental depthwise convolution and residual suppression,the Embedded-A module is proposed,which expands the depth of the feature map twice to form a residual structure to improve the lightweight degree of the model.According to residual fusion theory,the Embedded-B module is proposed,which improves the accuracy of feature-map downsampling by depthwise convolution and pooling fusion.The Embedded YOLO object detection network is formed by stacking the embedded modules and the fusion of feature maps of different resolutions.Experimental results on the testing set show that the Embedded YOLO tree detection algorithm has 84.17%and 69.91%average precision values respectively for trunk and spherical tree,and 77.04% mean average precision value.The number of convolution parameters is 1.78×10^(6),and the calculation amount is 3.85 billion float operations per second.The size of weight file is 7.11MB,and the detection speed can reach 179 frame/s.This study provides a theoretical basis for the lightweight application of the object detection algorithm based on deep learning for lawn mower robots.
基金supported by the National Natural Science Foundation of China (Grant Nos. 60901029, 61172148, and 60925005)the Natural Science Foundation of Shaanxi Province, China (Grant No. 2011JQ8040)
文摘A new technique for designing a varactor-tunable frequency selective surface （FSS） with an embedded bias network is proposed and experimentally verified. The proposed FSS is based on a square-ring slot FSS. The frequency tuning is achieved by inserting varactor diodes between the square mesh and each unattached square patch. The square mesh is divided into two parts for biasing the varactor diodes. Full-wave numerical simulations show that a wide tuning range can be achieved by changing the capacitances of these loaded varactors. Two homo-type samples using fixed lumped capacitors are fabricated and measured using a standard waveguide measurement setup. Excellent agreement between the measured and simulated results is demonstrated.
基金Funded by China 863 R&D Program (No:2001AA414630)
文摘A new-style remote monitoring system is proposed, which is based on enterprises' embedded web servers and can be widely used in enterprises' networked manufacturing systems. The principle and characteristics of remote monitoring system based on embedded web server are analyzed. Such a kind of system for networked manufacturing is designed, and it proves efficient and feasible in promoting communication among enterprises, improving designing and scheduling, decreasing facility failure and reducing product cost.
基金supported by the National Natural Science Foundation of China under Grants No.61534002,No.61761136015,No.61701095.
文摘Because of computational complexity,the deep neural network(DNN)in embedded devices is usually trained on high-performance computers or graphic processing units(GPUs),and only the inference phase is implemented in embedded devices.Data processed by embedded devices,such as smartphones and wearables,are usually personalized,so the DNN model trained on public data sets may have poor accuracy when inferring the personalized data.As a result,retraining DNN with personalized data collected locally in embedded devices is necessary.Nevertheless,retraining needs labeled data sets,while the data collected locally are unlabeled,then how to retrain DNN with unlabeled data is a problem to be solved.This paper proves the necessity of retraining DNN model with personalized data collected in embedded devices after trained with public data sets.It also proposes a label generation method by which a fake label is generated for each unlabeled training case according to users’feedback,thus retraining can be performed with unlabeled data collected in embedded devices.The experimental results show that our fake label generation method has both good training effects and wide applicability.The advanced neural networks can be trained with unlabeled data from embedded devices and the individualized accuracy of the DNN model can be gradually improved along with personal using.
基金the National High Technology Research and Development Program of China (863 Program)(Grant No.2006AA040601)
文摘One kind of combustible gas alarms based on industrial Ethernet was designed to prevent the gas leakage in industrial production sites, The alarm adopted the high performance microprocessor LPC2214 as the main chip. The embedded operating system μC/OS-Ⅱand TCP/IP protocol stack uIP running on LPC2214 constitute a development platform of application of the combustible gas alarm, The test shows that it can automatically and continuously detect combustible gas in industrial production sites in several positions;it can give out sound-light alarm and take protective measures immediately against the gas leakage; and it can send the detected data to PC through the Ethernet interface to realize the remote detection. The designed project provides a reference to design industrial devices based on industrial Ethernet
文摘This paper presents a new encryption embedded processor aimed at the application requirement of wireless sensor network （WSN）. The new encryption embedded processor not only offers Rivest Shamir Adlemen （RSA）, Advanced Encryption Standard （AES）, 3 Data Encryption Standard （3 DES） and Secure Hash Algorithm 1 （SHA - 1 ） security engines, but also involves a new memory encryption scheme. The new memory encryption scheme is implemented by a memory encryption cache （MEC）, which protects the confidentiality of the memory by AES encryption. The experi- ments show that the new secure design only causes 1.9% additional delay on the critical path and cuts 25.7% power consumption when the processor writes data back. The new processor balances the performance overhead, the power consumption and the security and fully meets the wireless sensor environment requirement. After physical design, the new encryption embedded processor has been successfully tape-out.
基金Applied Programof Basic Research of Tianjin(08JCYBJC14700)
文摘A scheme of transmission control protocol/Internet protocol（TCP/IP） network system based on system-on-programmable chip（SOPC） is proposed for the embedded network communication. In this system, Nios processor, Ethernet controller and other peripheral logic circuits are all integrated on a Stratix Ⅱ field programmable gate array （FPGA） chip by using SOPC builder design software. And the network communication is realized by transplanting MicroC/OS Ⅱ （uC/OS Ⅱ ） operation system and light weight Internet protocol（LwIP）. The design idea, key points and the structures of both software and hardware of the system are presented and ran with a telecommunication example. The experiment shows that the embedded TCP/IP network system has high reliability and real-time performance.
文摘The interconnection of Solar PV to the Tarkwa Bulk Supply Point (BSP) has become necessary in order to provide additional capacity to meet the ever-increasing demand of Tarkwa and its environs during the day. The Solar PV Plant will support the Tarkwa BSP during the day. In this study, a grid impact analysis for the integration of Solar PV plant at three points of common coupling (PCC) at Tarkwa Bulk Supply Point’s (BSP) 33 kV network of the Electricity Company of Ghana was carried out. The three PCCs were Tarkwa BSP, Ghana Australia Gold (GAG) Substation and Darmang Substation. Simulations and detailed analysis were carried out with the use of CYME Software (Cyme 8.0 Rev 05). The Solar PV was integrated at varying penetration levels of 9 MWp, 11 MWp, 14 MWp, 16 MWp, 18 MWp, 20 MWp and 23 MWp (representing penetration levels of 40%, 50%, 60%, 70%, 80%, 90% and 100%, respectively) of the 2020 projected light demand of Tarkwa BSP 25.15 MVA network at an average power factor of 0.903. From the study, the optimum capacity of Solar PV power that could be connected is 9 MWp at an optimum inverter power factor of 0.94 lagging, and the GAG Substation was identified as the optimal location. The stiffness ratio at the optimal location was determined as 41.9, a figure which is far greater than the minimum standard value of 5, and gives an indication of very little voltage control problems in the operation of the proposed Solar PV interconnection. The integration of the optimum 9 MW Solar PV Plant to the Tarkwa network represents an additional 12.77% capacity, decreased the technical losses by 7.76%, and increased the voltage profile by 1.97%.
文摘In order to achieve remote control problems for the intelligent home appliances, The paper presents a realization method through the Internet and GSM remote to control appliances of smart home, and given circuit. And described in detail the hardware and software design of smart home appliances and their control method. Test results show that the system is stable and reliable.
文摘In recent years, online engineering technologies are widely distributed and developed. Their influence on society is very strong. The Internet technology has provided additional opportunities for a new development level of education, design and production. Associations and scientific conferences in the field of online engineering that appeared, seek to foster practices in education and research in higher education institutions and the industry on online engineering. A particular challenge for online engineering is how to extend the traditional equipments and laboratories to the Internet. A method of the embedded systems design with using online laboratory is described in this paper. Also, in this paper the experimental set of remote laboratory which allows carrying out hardware/software oriented design of the embedded control system of a mobile platform is considered.
文摘In recent years,with the development of the natural language processing(NLP)technologies,security analyst began to use NLP directly on assembly codes which were disassembled from binary executables in order to examine binary similarity,achieved great progress.However,we found that the existing frameworks often ignored the complex internal structure of instructions and didn’t fully consider the long-term dependencies of instructions.In this paper,we propose firmVulSeeker—a vulnerability search tool for embedded firmware images,based on BERT and Siamese network.It first builds a BERT MLM task to observe and learn the semantics of different instructions in their context in a very large unlabeled binary corpus.Then,a finetune mode based on Siamese network is constructed to guide training and matching semantically similar functions using the knowledge learned from the first stage.Finally,it will use a function embedding generated from the fine-tuned model to search in the targeted corpus and find the most similar function which will be confirmed whether it’s a real vulnerability manually.We evaluate the accuracy,robustness,scalability and vulnerability search capability of firmVulSeeker.Results show that it can greatly improve the accuracy of matching semantically similar functions,and can successfully find more real vulnerabilities in real-world firmware than other tools.
文摘The hard target smart fuse of penetration ammunition is developing to be smaller, lighter, smarter and multifunction. After analyzing the characteristics of high-g accelerating signals and the penetration algorithms, this paper provides a solution of penetration ammunition fuse system based on embedded technology. This fuse system realizes acquisition of the high-g accelerating signals and uses the appropriate penetration algorithms to process them. The fuse system can not only make the same type of penetration ammunition to attack different kinds of objects accurately, but also meet the other requirements of the function of penetration ammunition fuse system.
文摘Recent advancements in autonomous vehicle technologies are transforming intelligent transportation systems.Artificial intelligence enables real-time sensing,decision-making,and control on embedded platforms with improved efficiency.This study presents the design and implementation of an autonomous radio-controlled(RC)vehicle prototype capable of lane line detection,obstacle avoidance,and navigation through dynamic path planning.The system integrates image processing and ultrasonic sensing,utilizing Raspberry Pi for vision-based tasks and ArduinoNano for real-time control.Lane line detection is achieved through conventional image processing techniques,providing the basis for local path generation,while traffic sign classification employs a You Only Look Once(YOLO)model optimized with TensorFlow Lite to support navigation decisions.Images captured by the onboard camera are processed on the Raspberry Pi to extract lane geometry and calculate steering angles,enabling the vehicle to follow the planned path.In addition,ultrasonic sensors placed in three directions at the front of the vehicle detect obstacles and allow real-time path adjustment for safe navigation.Experimental results demonstrate stable performance under controlled conditions,highlighting the system’s potential for scalable autonomous driving applications.This work confirms that deep learning methods can be efficiently deployed on low-power embedded systems,offering a practical framework for navigation,path planning,and intelligent transportation research.
