The embedded length of anti-slide piles for slope is analyzed by three-dimensional elastoplastic shear strength reduction method. The effect of embedded pile length on the factor of safety and pile behavior is analyze...The embedded length of anti-slide piles for slope is analyzed by three-dimensional elastoplastic shear strength reduction method. The effect of embedded pile length on the factor of safety and pile behavior is analyzed. Furthermore, the effects of pile spacing, pile head conditions, pile bending stiffness and soil properties on length and behavior of pile are also analyzed. The results show that the pile spacing and the pile head conditions have significant influences on the critical embedded length of pile. It is found that the critical embedded length of pile, beyond which the factor of safety does not increase, increases with the decrease in pile spacing. The smaller the pile spacing is, the larger the integrity of the reinforced slope will be. A theoretical analysis of the slip surface is also conducted, and the slip surface determined by the pressure on piles, considering the influences of both soil and piles for slope, is in agreement with the ones in previous studies.展开更多
ASIC or FPGA implementation of a finite word-length PID controller requires a double expertise： in control system and hardware design. In this paper, we only focus on the hardware side of the problem. We show how to ...ASIC or FPGA implementation of a finite word-length PID controller requires a double expertise： in control system and hardware design. In this paper, we only focus on the hardware side of the problem. We show how to design configurable fixed-point PIDs to satisfy applications requiring minimal power consumption, or high control-rate, or both together. As multiply operation is the engine of PID, we experienced three algorithms： Booth, modified Booth, and a new recursive multi-bit multiplication algorithm. This later enables the construction of finely grained PID structures with bit-level and unit-time precision. Such a feature permits to tailor the PID to the desired performance and power budget. All PIDs are implemented at register-transfer4evel （RTL） level as technology-independent reusable IP-cores. They are reconfigurable according to two compilemtime constants： set-point word-length and latency. To make PID design easily reproducible, all necessary implementation details are provided and discussed.展开更多
So far, numerous numerical studies have been conducted on the behavior of Composite Reinforced Concrete-Steel （RCS） beam-to-column connections. However, the lack of studies regarding the steel joist-concrete girder ...So far, numerous numerical studies have been conducted on the behavior of Composite Reinforced Concrete-Steel （RCS） beam-to-column connections. However, the lack of studies regarding the steel joist-concrete girder connection has yet to be addressed through comprehensive finite element methods to get an understanding of influential parameters. Hence, in this paper, composite connection of embedded steel joist in concrete girder is investigated with an appropriate finite element software, namely, ABAQUS. The validity of the proposed model is examined by the comparison made with the test data in literature. Results indicate that maximum bending capacity of the connection is achieved when embedment ratio is 1.78. Moreover, double web angles in the embedment region significantly reduce the embedment length required to achieve the maximum bending capacity. Finally, damage analyses show that bending capacity of concrete girder is slightly reduced in the connection zone.展开更多
Text summarization aims to generate a concise version of the original text.The longer the summary text is,themore detailed it will be fromthe original text,and this depends on the intended use.Therefore,the problem of...Text summarization aims to generate a concise version of the original text.The longer the summary text is,themore detailed it will be fromthe original text,and this depends on the intended use.Therefore,the problem of generating summary texts with desired lengths is a vital task to put the research into practice.To solve this problem,in this paper,we propose a new method to integrate the desired length of the summarized text into the encoder-decoder model for the abstractive text summarization problem.This length parameter is integrated into the encoding phase at each self-attention step and the decoding process by preserving the remaining length for calculating headattention in the generation process and using it as length embeddings added to theword embeddings.We conducted experiments for the proposed model on the two data sets,Cable News Network(CNN)Daily and NEWSROOM,with different desired output lengths.The obtained results show the proposed model’s effectiveness compared with related studies.展开更多
文摘The embedded length of anti-slide piles for slope is analyzed by three-dimensional elastoplastic shear strength reduction method. The effect of embedded pile length on the factor of safety and pile behavior is analyzed. Furthermore, the effects of pile spacing, pile head conditions, pile bending stiffness and soil properties on length and behavior of pile are also analyzed. The results show that the pile spacing and the pile head conditions have significant influences on the critical embedded length of pile. It is found that the critical embedded length of pile, beyond which the factor of safety does not increase, increases with the decrease in pile spacing. The smaller the pile spacing is, the larger the integrity of the reinforced slope will be. A theoretical analysis of the slip surface is also conducted, and the slip surface determined by the pressure on piles, considering the influences of both soil and piles for slope, is in agreement with the ones in previous studies.
文摘ASIC or FPGA implementation of a finite word-length PID controller requires a double expertise： in control system and hardware design. In this paper, we only focus on the hardware side of the problem. We show how to design configurable fixed-point PIDs to satisfy applications requiring minimal power consumption, or high control-rate, or both together. As multiply operation is the engine of PID, we experienced three algorithms： Booth, modified Booth, and a new recursive multi-bit multiplication algorithm. This later enables the construction of finely grained PID structures with bit-level and unit-time precision. Such a feature permits to tailor the PID to the desired performance and power budget. All PIDs are implemented at register-transfer4evel （RTL） level as technology-independent reusable IP-cores. They are reconfigurable according to two compilemtime constants： set-point word-length and latency. To make PID design easily reproducible, all necessary implementation details are provided and discussed.
文摘So far, numerous numerical studies have been conducted on the behavior of Composite Reinforced Concrete-Steel （RCS） beam-to-column connections. However, the lack of studies regarding the steel joist-concrete girder connection has yet to be addressed through comprehensive finite element methods to get an understanding of influential parameters. Hence, in this paper, composite connection of embedded steel joist in concrete girder is investigated with an appropriate finite element software, namely, ABAQUS. The validity of the proposed model is examined by the comparison made with the test data in literature. Results indicate that maximum bending capacity of the connection is achieved when embedment ratio is 1.78. Moreover, double web angles in the embedment region significantly reduce the embedment length required to achieve the maximum bending capacity. Finally, damage analyses show that bending capacity of concrete girder is slightly reduced in the connection zone.
基金funded by Vietnam National Foundation for Science and Technology Development(NAFOSTED)under Grant Number 102.05-2020.26。
文摘Text summarization aims to generate a concise version of the original text.The longer the summary text is,themore detailed it will be fromthe original text,and this depends on the intended use.Therefore,the problem of generating summary texts with desired lengths is a vital task to put the research into practice.To solve this problem,in this paper,we propose a new method to integrate the desired length of the summarized text into the encoder-decoder model for the abstractive text summarization problem.This length parameter is integrated into the encoding phase at each self-attention step and the decoding process by preserving the remaining length for calculating headattention in the generation process and using it as length embeddings added to theword embeddings.We conducted experiments for the proposed model on the two data sets,Cable News Network(CNN)Daily and NEWSROOM,with different desired output lengths.The obtained results show the proposed model’s effectiveness compared with related studies.
