Despite the prevalence and validity of the universal distinct element code(UDEC)in simulations in geotechnics domain,water-weakening process of rock models remains elusive.Prior research has made positive contribution...Despite the prevalence and validity of the universal distinct element code(UDEC)in simulations in geotechnics domain,water-weakening process of rock models remains elusive.Prior research has made positive contributions to a presupposed link between modelling parameters and saturation degree,Sr.Nevertheless,this effort presents inaccurate results and limited implications owing to the misleading interpretation,that is,devoid of the basic logic in UDEC that modelling parameters should be calibrated by tested macroscopic properties in contrast to a presupposed relation with Sr.To fill this gap,a new methodology is proposed by coupling a computationally efficient parametric study with the simulation of water-weakening mechanisms.More specifically,tested macroscopic properties with different Sr values are input into parametric relations to acquire initial modelling parameters that are sequentially calibrated and modulated until simulations are in line with geomechanical tests.Illustrative example reveals that numerical water-weakening effects on macroscopic properties,mechanical behaviours,and failure configurations are highly consistent with tested ones with noticeable computational expediency,implying the feasibility and simplicity of this methodology.Furthermore,with compatibility across various numerical models,the proposed methodology substantially extends the applicability of UDEC in simulating water-weakening geotechnical problems.展开更多
三峡库区周期性水位升降引起的消落带岩体劣化对典型危岩岸坡稳定性具有重大影响。基于野外调研及地勘资料,采用通用离散单元法程序(universal distinct element code,简称UDEC)研究了消落带劣化区形态对近水平层状高陡危岩岸坡的稳定...三峡库区周期性水位升降引起的消落带岩体劣化对典型危岩岸坡稳定性具有重大影响。基于野外调研及地勘资料,采用通用离散单元法程序(universal distinct element code,简称UDEC)研究了消落带劣化区形态对近水平层状高陡危岩岸坡的稳定性影响。研究表明:目前三峡库区巫山段的近水平层状危岩岸坡消落带岩体劣化严重,在不同消落带劣化区存在紧密层状、松散碎裂状、溶蚀凹腔状、含挤压碎裂带等典型消落带劣化区形态;含有第1种消落带劣化区形态的危岩岸坡稳定性较好,危岩体位移较小,失稳模式为滑移破坏;含有第2种消落带劣化区形态的危岩岸坡危岩体先向坡内偏移,其后随着消落带岩体支撑强度弱化向坡外倾倒破坏;含有第3种消落带劣化区形态的危岩岸坡危岩体向坡外位移较大,失稳模式为倾倒破坏;含有第4种消落带劣化区形态的危岩岸坡稳定性主要受挤压破碎带的力学性质控制,易产生沿破碎带切割面的旋转滑移破坏;通过对以上4种劣化区形态的危岩岸坡增加防治加固措施,危岩体的变形位移得到了不同程度的有效控制。展开更多
The purpose of this paper is to discuss the suitability of out-of-codes tall slab-column and shearwall structure and to popularize the structure in seismic region.In the research,flat-plate floor was used in slab-colu...The purpose of this paper is to discuss the suitability of out-of-codes tall slab-column and shearwall structure and to popularize the structure in seismic region.In the research,flat-plate floor was used in slab-column and shearwall structure in the practical engineering,the key parameters of slab-column and shearwall structure and frame-shearwall structure such as deflection,punching shear behavior,story drift and capability curve were worked out by static plastic analysis,elastic-plastic time history analysis and pushover analysis,then the suitability of out-of-codes tall slab-column and shearwall structure was evaluated.The results show that the out-of-codes tall slab-column and shearwall structure studies could satisfy the require of deflection and punching shear behavior,the story drift under 7 degree expected rare earthquake waves could satisfy the limit value in the codes and the seismic design spectrum was crossed by the capability curve of the structure and the structure could not collapse.The conclusion is that slab-column and shearwall structure with reasonable design built in Ⅱ soil site of intensity 7 seismic fortification zone can be designed higher than the limit height in the codes.展开更多
Recent seismic events have raised concerns over the safety and vulnerability of reinforced concrete moment resisting frame ＂RC-MRF＂ buildings. The seismic response of such buildings is greatly dependent on the compu...Recent seismic events have raised concerns over the safety and vulnerability of reinforced concrete moment resisting frame ＂RC-MRF＂ buildings. The seismic response of such buildings is greatly dependent on the computational tools used and the inherent assumptions in the modelling process. Thus, it is essential to investigate the sensitivity of the response demands to the corresponding modelling assumption. Many parameters and assumptions are justified to generate effective structural finite element（FE） models of buildings to simulate lateral behaviour and evaluate seismic design demands. As such, the present study focuses on the development of reliable FE models with various levels of refinement. The effects of the FE modelling assumptions on the seismic response demands on the design of buildings are investigated. the predictive ability of a FE model is tied to the accuracy of numerical analysis; a numerical analysis is performed for a series of symmetric buildings in active seismic zones. The results of the seismic response demands are presented in a comparative format to confirm drift and strength limits requirements. A proposed model is formulated based on a simplified modeling approach, where the most refined model is used to calibrate the simplified model.展开更多
The deformation and fracture evolution mechanisms of the strata overlying mines mined using sublevel caving were studied via numerical simulations.Moreover,an expression for the normal force acting on the side face of...The deformation and fracture evolution mechanisms of the strata overlying mines mined using sublevel caving were studied via numerical simulations.Moreover,an expression for the normal force acting on the side face of a steeply dipping superimposed cantilever beam in the surrounding rock was deduced based on limit equilibrium theory.The results show the following:(1)surface displacement above metal mines with steeply dipping discontinuities shows significant step characteristics,and(2)the behavior of the strata as they fail exhibits superimposition characteristics.Generally,failure first occurs in certain superimposed strata slightly far from the goaf.Subsequently,with the constant downward excavation of the orebody,the superimposed strata become damaged both upwards away from and downwards toward the goaf.This process continues until the deep part of the steeply dipping superimposed strata forms a large-scale deep fracture plane that connects with the goaf.The deep fracture plane generally makes an angle of 12°-20°with the normal to the steeply dipping discontinuities.The effect of the constant outward transfer of strata movement due to the constant outward failure of the superimposed strata in the metal mines with steeply dipping discontinuities causes the scope of the strata movement in these mines to be larger than expected.The strata in the metal mines with steeply dipping discontinuities mainly show flexural toppling failure.However,the steeply dipping structural strata near the goaf mainly exhibit shear slipping failure,in which case the mechanical model used to describe them can be simplified by treating them as steeply dipping superimposed cantilever beams.By taking the steeply dipping superimposed cantilever beam that first experiences failure as the key stratum,the failure scope of the strata(and criteria for the stability of metal mines with steeply dipping discontinuities mined using sublevel caving)can be obtained via iterative computations from the key stratum,moving downward toward and upwards away from the goaf.展开更多
The reaction of earth to pull-out process of frictional rock bolts was here modeled by the distinct element method (DEM). Ten frictional bolts were prepared;the expanding shells of five bolts included convex edges and...The reaction of earth to pull-out process of frictional rock bolts was here modeled by the distinct element method (DEM). Ten frictional bolts were prepared;the expanding shells of five bolts included convex edges and the others had the shells with concave bits. The strength of bolts was measured by applying a standard pull-out test;the results confirmed that the strength of shells with convex edges was remarkably more than the strength of other shells. Furthermore, a two-dimensional DEM model of the test was developed by a particle flow code;the obtained results showed that the reaction of rock particles to the contacts occurring between the convex edges and earth was considerably more than those of the concave bits. In the other words, the convex edges transferred the pull-out force into a large area of the surrounded rock, causing these bolts to have the highest resistance against earth movements.展开更多
基金supported by the National Natural Science Foundation of China under Grant Nos.41977249 and 42090052the China Scholarship Council under file No.202204910040.
文摘Despite the prevalence and validity of the universal distinct element code(UDEC)in simulations in geotechnics domain,water-weakening process of rock models remains elusive.Prior research has made positive contributions to a presupposed link between modelling parameters and saturation degree,Sr.Nevertheless,this effort presents inaccurate results and limited implications owing to the misleading interpretation,that is,devoid of the basic logic in UDEC that modelling parameters should be calibrated by tested macroscopic properties in contrast to a presupposed relation with Sr.To fill this gap,a new methodology is proposed by coupling a computationally efficient parametric study with the simulation of water-weakening mechanisms.More specifically,tested macroscopic properties with different Sr values are input into parametric relations to acquire initial modelling parameters that are sequentially calibrated and modulated until simulations are in line with geomechanical tests.Illustrative example reveals that numerical water-weakening effects on macroscopic properties,mechanical behaviours,and failure configurations are highly consistent with tested ones with noticeable computational expediency,implying the feasibility and simplicity of this methodology.Furthermore,with compatibility across various numerical models,the proposed methodology substantially extends the applicability of UDEC in simulating water-weakening geotechnical problems.
文摘三峡库区周期性水位升降引起的消落带岩体劣化对典型危岩岸坡稳定性具有重大影响。基于野外调研及地勘资料,采用通用离散单元法程序(universal distinct element code,简称UDEC)研究了消落带劣化区形态对近水平层状高陡危岩岸坡的稳定性影响。研究表明:目前三峡库区巫山段的近水平层状危岩岸坡消落带岩体劣化严重,在不同消落带劣化区存在紧密层状、松散碎裂状、溶蚀凹腔状、含挤压碎裂带等典型消落带劣化区形态;含有第1种消落带劣化区形态的危岩岸坡稳定性较好,危岩体位移较小,失稳模式为滑移破坏;含有第2种消落带劣化区形态的危岩岸坡危岩体先向坡内偏移,其后随着消落带岩体支撑强度弱化向坡外倾倒破坏;含有第3种消落带劣化区形态的危岩岸坡危岩体向坡外位移较大,失稳模式为倾倒破坏;含有第4种消落带劣化区形态的危岩岸坡稳定性主要受挤压破碎带的力学性质控制,易产生沿破碎带切割面的旋转滑移破坏;通过对以上4种劣化区形态的危岩岸坡增加防治加固措施,危岩体的变形位移得到了不同程度的有效控制。
文摘The purpose of this paper is to discuss the suitability of out-of-codes tall slab-column and shearwall structure and to popularize the structure in seismic region.In the research,flat-plate floor was used in slab-column and shearwall structure in the practical engineering,the key parameters of slab-column and shearwall structure and frame-shearwall structure such as deflection,punching shear behavior,story drift and capability curve were worked out by static plastic analysis,elastic-plastic time history analysis and pushover analysis,then the suitability of out-of-codes tall slab-column and shearwall structure was evaluated.The results show that the out-of-codes tall slab-column and shearwall structure studies could satisfy the require of deflection and punching shear behavior,the story drift under 7 degree expected rare earthquake waves could satisfy the limit value in the codes and the seismic design spectrum was crossed by the capability curve of the structure and the structure could not collapse.The conclusion is that slab-column and shearwall structure with reasonable design built in Ⅱ soil site of intensity 7 seismic fortification zone can be designed higher than the limit height in the codes.
基金Scientific Research Deanship,Taibah University Grant No.6363/436
文摘Recent seismic events have raised concerns over the safety and vulnerability of reinforced concrete moment resisting frame ＂RC-MRF＂ buildings. The seismic response of such buildings is greatly dependent on the computational tools used and the inherent assumptions in the modelling process. Thus, it is essential to investigate the sensitivity of the response demands to the corresponding modelling assumption. Many parameters and assumptions are justified to generate effective structural finite element（FE） models of buildings to simulate lateral behaviour and evaluate seismic design demands. As such, the present study focuses on the development of reliable FE models with various levels of refinement. The effects of the FE modelling assumptions on the seismic response demands on the design of buildings are investigated. the predictive ability of a FE model is tied to the accuracy of numerical analysis; a numerical analysis is performed for a series of symmetric buildings in active seismic zones. The results of the seismic response demands are presented in a comparative format to confirm drift and strength limits requirements. A proposed model is formulated based on a simplified modeling approach, where the most refined model is used to calibrate the simplified model.
基金Financial support for this work was provided by the Youth Fund Program of the National Natural Science Foundation of China (No. 42002292)the General Program of the National Natural Science Foundation of China (No. 42377175)the General Program of the Hubei Provincial Natural Science Foundation, China (No. 2023AFB631)
文摘The deformation and fracture evolution mechanisms of the strata overlying mines mined using sublevel caving were studied via numerical simulations.Moreover,an expression for the normal force acting on the side face of a steeply dipping superimposed cantilever beam in the surrounding rock was deduced based on limit equilibrium theory.The results show the following:(1)surface displacement above metal mines with steeply dipping discontinuities shows significant step characteristics,and(2)the behavior of the strata as they fail exhibits superimposition characteristics.Generally,failure first occurs in certain superimposed strata slightly far from the goaf.Subsequently,with the constant downward excavation of the orebody,the superimposed strata become damaged both upwards away from and downwards toward the goaf.This process continues until the deep part of the steeply dipping superimposed strata forms a large-scale deep fracture plane that connects with the goaf.The deep fracture plane generally makes an angle of 12°-20°with the normal to the steeply dipping discontinuities.The effect of the constant outward transfer of strata movement due to the constant outward failure of the superimposed strata in the metal mines with steeply dipping discontinuities causes the scope of the strata movement in these mines to be larger than expected.The strata in the metal mines with steeply dipping discontinuities mainly show flexural toppling failure.However,the steeply dipping structural strata near the goaf mainly exhibit shear slipping failure,in which case the mechanical model used to describe them can be simplified by treating them as steeply dipping superimposed cantilever beams.By taking the steeply dipping superimposed cantilever beam that first experiences failure as the key stratum,the failure scope of the strata(and criteria for the stability of metal mines with steeply dipping discontinuities mined using sublevel caving)can be obtained via iterative computations from the key stratum,moving downward toward and upwards away from the goaf.
文摘The reaction of earth to pull-out process of frictional rock bolts was here modeled by the distinct element method (DEM). Ten frictional bolts were prepared;the expanding shells of five bolts included convex edges and the others had the shells with concave bits. The strength of bolts was measured by applying a standard pull-out test;the results confirmed that the strength of shells with convex edges was remarkably more than the strength of other shells. Furthermore, a two-dimensional DEM model of the test was developed by a particle flow code;the obtained results showed that the reaction of rock particles to the contacts occurring between the convex edges and earth was considerably more than those of the concave bits. In the other words, the convex edges transferred the pull-out force into a large area of the surrounded rock, causing these bolts to have the highest resistance against earth movements.
