In rock drilling and blasting,the misfire of electronic detonators will not only affect the rock fragmentation result but also bring serious potential safety hazards to engineering construction.An accurate and compreh...In rock drilling and blasting,the misfire of electronic detonators will not only affect the rock fragmentation result but also bring serious potential safety hazards to engineering construction.An accurate and comprehensive understanding of the failure mechanisms of electronic detonators subjected to impact loading is of great significance to the reliability design and field safety use of electronic detonators.The spatial distribution characteristics and failure modes of misfired electronic detonators under different application scenarios are statistically analysed.The results show that under high impact loads,electronic detonators will experience failure phenomena such as rupture of the fuse head,fracture of the bridge wire,falling off of the solder joint,chip module damage and insufficient initiation energy after deformation.The lack of impact resistance is the primary cause of misfire of electronic detonators.Combined with the underwater impact resistance test and the impact load test in the adjacent blasthole on site,the formulas of the impact failure probability of the electronic detonator under different stress‒strength distribution curves are deduced.The test and evaluation method of the impact resistance of electronic detonators based on stress‒strength interference theory is proposed.Furthermore,the impact failure model of electronic detonators considering the strength degradation effect under repeated random loads is established.On this basis,the failure mechanism of electronic detonators under different application environments,such as open-pit blasting and underground blasting,is revealed,which provides scientific theory and methods for the reliability analysis,design and type selection of electronic detonators in rock drilling and blasting.展开更多
Electronic detonators are widely used because of their advantages in real-time supervision of the whole life cycle (Zang, 2022). Due to the high requirements of the time difference synchronization between the electron...Electronic detonators are widely used because of their advantages in real-time supervision of the whole life cycle (Zang, 2022). Due to the high requirements of the time difference synchronization between the electronic initiation system and the seismic wave recording system, the Electronic detonator has not been widely used for Seismic exploration (Yang, 2020). This paper expounds the systematic and scientific test method from the aspects of the comprehensive performance of electronic detonators for exploration, the compatibility between the electronic detonator initiation system and the geophysical blasting machine system, the constraints of the geophysical explosion-related collaborative Danling managment cloud platform, and the quality of data collected by electronic detonator blasting in wells., and based on the analysis of the test results, the problems that need to be improved in the application of electronic detonators and detonation systems in the large-scale production of geophysical prospecting industry are put forward. .展开更多
Drilling and blasting methods have been used as a common driving technique for shallow-hole driving and blasting in rock roadways.With the advent of digital electronic detonators and the need for increased production ...Drilling and blasting methods have been used as a common driving technique for shallow-hole driving and blasting in rock roadways.With the advent of digital electronic detonators and the need for increased production efciency,the traditional blasting design is no longer suitable for deep hole blasting.In this paper,a disperse charge cut blasting method was proposed to address the issues of low excavation depth and high block rate in deep hole undercut blasting.First,a blasting model was used to illustrate the mechanism of the deep hole dispersive charge cut blasting process.Then,continuous charge and dispersed charge blasting models were developed using the smooth particle hydrodynamics-fnite element method(SPHFEM).The cutting parameters were determined theoretically,and the cutting efciency was introduced to evaluate the cutting efect.The blasting efects of the two charging models were analyzed utilizing the evolution law of rock damage,the number of rock particles thrown,and the cutting efciency.The results show that using a dispersed charge improves the cutting efciency by about 20%and the rock breakage for the deep hole cut blasting compared to the traditional continuous charge.In addition,important parameters such as cutting hole spacing,cutting hole depth and upper charge proportion also have a signifcant impact on the cutting efect.Finally,the deep hole dispersed charge cut blasting technology is combined with the digital electronic detonator through the feld engineering practice.It provides a reference for the subsequent deep hole cutting blasting and the use of electronic detonators in rock roadways.展开更多
The geometric structure, mechanism of detonation initiation and stability of transition metal carbohydrazide （CHZ） nitrates are investigated via density functional theory. The obtained results show that the Heyd-Scu...The geometric structure, mechanism of detonation initiation and stability of transition metal carbohydrazide （CHZ） nitrates are investigated via density functional theory. The obtained results show that the Heyd-Scuseria-Ernzerhof （HSE） functional yields the most accurate geometry. The initiating reaction of detonation in [Mn（CHZ）3]（NO3）2 and [Zn（CHZ）3]（NO3）2 is the formation of NO3 radicals. The calculated heat of formation and energy gap predict that the Mn and Zn complexes, which have the half-filled （3d5） and full-filled （3d10） electron configurations for the transition metal ions, respectively are more stable than the Co, Ni and Cu complexes. This indicates that the electron configuration of transition metal ion plays an important role in the stabilities of these energetic complexes.展开更多
基金supported by the Chongqing Youth Talent Support Program(Cstc2022ycjh-bgzxm0079)the Chinese National Natural Science Foundation(52379128,51979152)+2 种基金Science Fund for Distinguished Young Scholars of Hubei Proivnce(2023AFA048)Educational Commission of Hubei Province of China(T2020005)the Young Top-notch Talent Cultivation Program of Hubei Province.
文摘In rock drilling and blasting,the misfire of electronic detonators will not only affect the rock fragmentation result but also bring serious potential safety hazards to engineering construction.An accurate and comprehensive understanding of the failure mechanisms of electronic detonators subjected to impact loading is of great significance to the reliability design and field safety use of electronic detonators.The spatial distribution characteristics and failure modes of misfired electronic detonators under different application scenarios are statistically analysed.The results show that under high impact loads,electronic detonators will experience failure phenomena such as rupture of the fuse head,fracture of the bridge wire,falling off of the solder joint,chip module damage and insufficient initiation energy after deformation.The lack of impact resistance is the primary cause of misfire of electronic detonators.Combined with the underwater impact resistance test and the impact load test in the adjacent blasthole on site,the formulas of the impact failure probability of the electronic detonator under different stress‒strength distribution curves are deduced.The test and evaluation method of the impact resistance of electronic detonators based on stress‒strength interference theory is proposed.Furthermore,the impact failure model of electronic detonators considering the strength degradation effect under repeated random loads is established.On this basis,the failure mechanism of electronic detonators under different application environments,such as open-pit blasting and underground blasting,is revealed,which provides scientific theory and methods for the reliability analysis,design and type selection of electronic detonators in rock drilling and blasting.
文摘Electronic detonators are widely used because of their advantages in real-time supervision of the whole life cycle (Zang, 2022). Due to the high requirements of the time difference synchronization between the electronic initiation system and the seismic wave recording system, the Electronic detonator has not been widely used for Seismic exploration (Yang, 2020). This paper expounds the systematic and scientific test method from the aspects of the comprehensive performance of electronic detonators for exploration, the compatibility between the electronic detonator initiation system and the geophysical blasting machine system, the constraints of the geophysical explosion-related collaborative Danling managment cloud platform, and the quality of data collected by electronic detonator blasting in wells., and based on the analysis of the test results, the problems that need to be improved in the application of electronic detonators and detonation systems in the large-scale production of geophysical prospecting industry are put forward. .
基金the State Key Development Program for Basic Research of China(2016YFC0600903)the National Natural Science Foundation of China(51934001).
文摘Drilling and blasting methods have been used as a common driving technique for shallow-hole driving and blasting in rock roadways.With the advent of digital electronic detonators and the need for increased production efciency,the traditional blasting design is no longer suitable for deep hole blasting.In this paper,a disperse charge cut blasting method was proposed to address the issues of low excavation depth and high block rate in deep hole undercut blasting.First,a blasting model was used to illustrate the mechanism of the deep hole dispersive charge cut blasting process.Then,continuous charge and dispersed charge blasting models were developed using the smooth particle hydrodynamics-fnite element method(SPHFEM).The cutting parameters were determined theoretically,and the cutting efciency was introduced to evaluate the cutting efect.The blasting efects of the two charging models were analyzed utilizing the evolution law of rock damage,the number of rock particles thrown,and the cutting efciency.The results show that using a dispersed charge improves the cutting efciency by about 20%and the rock breakage for the deep hole cut blasting compared to the traditional continuous charge.In addition,important parameters such as cutting hole spacing,cutting hole depth and upper charge proportion also have a signifcant impact on the cutting efect.Finally,the deep hole dispersed charge cut blasting technology is combined with the digital electronic detonator through the feld engineering practice.It provides a reference for the subsequent deep hole cutting blasting and the use of electronic detonators in rock roadways.
基金supported by the National Natural Science Foundation of China(No.20471008)the Natural Science Foundation of Chongqing(No.cstc2011jjA50013)the Chongqing Municipal Commission of Education(No.KJ111310)
文摘The geometric structure, mechanism of detonation initiation and stability of transition metal carbohydrazide （CHZ） nitrates are investigated via density functional theory. The obtained results show that the Heyd-Scuseria-Ernzerhof （HSE） functional yields the most accurate geometry. The initiating reaction of detonation in [Mn（CHZ）3]（NO3）2 and [Zn（CHZ）3]（NO3）2 is the formation of NO3 radicals. The calculated heat of formation and energy gap predict that the Mn and Zn complexes, which have the half-filled （3d5） and full-filled （3d10） electron configurations for the transition metal ions, respectively are more stable than the Co, Ni and Cu complexes. This indicates that the electron configuration of transition metal ion plays an important role in the stabilities of these energetic complexes.
