To address the challenges associated with existing separated zone oil production technologies,such as incompatibility with pump inspection operations,short effective working life,and poor communication reliability,an ...To address the challenges associated with existing separated zone oil production technologies,such as incompatibility with pump inspection operations,short effective working life,and poor communication reliability,an innovative electromagnetic coupling intelligent zonal oil production technology has been proposed.The core and accessory tools have been developed and applied in field tests.This technology employs a pipe string structure incorporation a release sub,which separates the production and allocation pipe strings.When the two strings are docked downhole,electromagnetic coupling enables close-range wireless transmission of electrical power and signals between the strings,powering multiple downhole intelligent production allocators(IPAs)and enabling two-way communication.Core tools adapted to the complex working conditions downhole were developed,including downhole electricity&signal transmission equipment based on electromagnetic coupling(EST),IPAs,and ground communication controllers(GCCs).Accessory tools,including large-diameter release sub anchor and cable-crossing packers,have also been technically finalized.Field tests conducted on ten wells in Daqing Oilfield demonstrated that the downhole docking of the two strings was convenient and reliable,and the EST worked stably.Real-time monitoring of flow rate,pressure and temperature in separate layers and regulation of zonal fluid production were also achieved.This technology has enhanced reservoir understanding and achieved practical production results of increased oil output with reduced water cut.展开更多
A hybrid method combining finite difference time domain(FDTD)with topology network was presented to treat with electromagnetic couplings and transmissions in large spaces A generalized matrix euqation expressing th...A hybrid method combining finite difference time domain(FDTD)with topology network was presented to treat with electromagnetic couplings and transmissions in large spaces A generalized matrix euqation expressing the relations among wave vectors at every port of the network nodes was give Scattering characteristics and electromagnetic distributions of every node was calculated independently using FDTD A structure of irises in a waveguide was taken as numerical examples This hybrid method has more advantages than the traditional FDTD method which includes saving calculation time,saving memory spaces and being flexible in setting up FDTD grids展开更多
This research presents a multi-band hybrid mobile phone antenna based on electromagnetic coupling,which can be applied to mobile handheld devices, occupying a small board space of 39.7 mm × 15.6 mm on the system ...This research presents a multi-band hybrid mobile phone antenna based on electromagnetic coupling,which can be applied to mobile handheld devices, occupying a small board space of 39.7 mm × 15.6 mm on the system circuit board. By adding resonant and coupled branch instead of multi-feed on the traditional bent antenna,this design provides four wide operating bands of 0.772—0.998 GHz, 1.540—1.600 GHz, 1.680—2.270 GHz and2.300—2.690 GHz with the hybrid feature of planar inverted-F antenna(PIFA), L-shape, U-shape and S-shape structures, which cover nine-band, i.e., GSM850, GSM900, GPS1575, DCS1800, PCS1900, IMT200, LTE2300,LTE2600 and Blue Tooth/Wi-Fi. Ansoft software HFSS is used in this research to make the antenna performance better and the operating principle of the proposed antenna is described in detail. Result of simulation reveals that the maximum gains of these four wide bands are 2.20,-0.99, 4.01 and 4.05 dBi, respectively. Moreover, this research also tests the return loss(S11) of the fabricated antenna with the vector network analyzer and the result is in accordance with the simulation result on the whole. There are four wide resonant frequencies which cover nine-band of wireless wide area network(WWAN), wireless local area network(WLAN) and long term evolution(LTE), when the available bandwidth is better than 6 d Bi return loss.展开更多
Moisture-enabled electricity generation(MEG)has emerged as a promising sustainable energy harvesting technology,comparable to photovoltaics,thermoelectrics,and triboelectrics[1].MEGs generate electricity by converting...Moisture-enabled electricity generation(MEG)has emerged as a promising sustainable energy harvesting technology,comparable to photovoltaics,thermoelectrics,and triboelectrics[1].MEGs generate electricity by converting the chemical potential of moisture into electric energy through interactions with hygroscopic materials and nanostructured interfaces.Unlike solar or thermal harvesters,MEGs operate continuously by utilizing ubiquitous atmospheric moisture,granting them unique spatial and temporal adaptability.Despite nearly a decade of progress and the exploration of diverse material systems for MEG,the overall output power remains significantly limited due to inherently low charge carrier concentrations and restricted ion diffusion fluxes[2].As a result,standalone MEG devices often deliver low and unstable output,limiting practical applications.To enhance performance and versatility,recent efforts have explored hybridization of MEG with other ambient energy sources such as triboelectric or thermoelectric effects.展开更多
With the continuous upgrading of traditional manufacturing industries and the rapid rise of emerging technology fields,the performance requirements for the permanent magnet synchronous motors(PMSMs)have become higher ...With the continuous upgrading of traditional manufacturing industries and the rapid rise of emerging technology fields,the performance requirements for the permanent magnet synchronous motors(PMSMs)have become higher and higher.The importance of fast and accurate electromagnetic thermal coupling analysis of such motors becomes more and more prominent.In view of this,the surfacemounted PMSM(SPMSM)equipped with unequally thick magnetic poles is taken as the main object and its electromagnetic thermal coupling analytical model(ETc AM)is investigated.First,the electromagnetic analytical model(EAM)is studied based on the modified subdomain method.It realizes the fast calculation of key electromagnetic characteristics.Subsequently,the 3D thermal analytical model(TAM)is developed by combining the EAM,the lumped parameter thermal network method(LPTNM),and the partial differential equation of heat flux.It realizes the fast calculation of key thermal characteristics in 3D space.Further,the information transfer channel between EAM and TAM is built with reference to the intrinsic connection between electromagnetic field and temperature field.Thereby,the novel ETcAM is proposed to realize the fast and accurate prediction of electromagnetic and temperature fields.Besides,ETcAM has a lot to commend it.One is that it well accounts for the complex structure,saturation,and heat exchange behavior.Second,it saves a lot of computer resources.It offers boundless possibilities for initial design,scheme evaluation,and optimization of motors.Finally,the validity,accuracy,and practicality of this study are verified by simulation and experiment.展开更多
For enhancing the electromagnetic wave(EW)attenuation and adsorption,rational constructing and homogeneously distributing bimetallic electromagnetic coupling units in hollow structure is an effective way,but hard to a...For enhancing the electromagnetic wave(EW)attenuation and adsorption,rational constructing and homogeneously distributing bimetallic electromagnetic coupling units in hollow structure is an effective way,but hard to achieve.Herein,a CoNi-doped hybrid zeolite imidazole framework was synthesized as precursor,which was further converted into a hollow CoNi-bimetallic doped molyb-denum carbide sphere(H-CoNi@MoC/NC)through a two-step etching and calcination strategy.At the loading amount of 15 wt%,a strong absorption of minimum reflection loss(RL_(min))of-60.05 dB at 7.2 GHz with the thickness of 3.1 mm and a wide effective ad-sorption bandwidth(EAB)of 3.52 GHz at the thickness of 2.5 mm were achieved,which was far beyond the reported MoC-based metallic hybrids.The crucial synergistic Co-Ni electromagnetic coupling effect in the composite was characterized,not only enhanc-ing the dipolar/interfacial polarization,but also promoting the impedance matching,displaying the optimized EW absorbing perfor-mance.展开更多
To improve high-speed road feel and enhance energetic efficiency of hydraulic power steering(HPS) system in heavy-duty vehicles, an electromagnetic slip coupling(ESC) was applied to the steering system, which regulate...To improve high-speed road feel and enhance energetic efficiency of hydraulic power steering(HPS) system in heavy-duty vehicles, an electromagnetic slip coupling(ESC) was applied to the steering system, which regulated discharge flow of steering pump to realize variable assist characteristic as well as uniquely transfer on-demand power from engine to steering pump. The model of ESC was established and the dynamic characteristics of ESC were presented by the way of simulation and experiment. Upon the layout of the assist characteristics, output torque of ESC was derived. Based on the ESC model, the output torque characteristics of ESC were simulated under steering situation and straight driving situation, respectively. The consistency of simulated ESC output torque and the one deduced from assist characteristics verifies the correctness of the ESC dynamic model. To illustrate energy saving characteristics of ESC-HPS, energy consumption comparison of ESC-HPS and conventional HPS was carried out qualitatively and quantitatively. It follows that the energy consumption of ESC-HPS decreases by 50% compared with that of HPS.展开更多
A loose coupling method is used to solve the electromagnetic tube bulging. ANSYS/ EMAG is used to model the time varying electromagnetic field with the discharge current used as excitation, in order to obtain the radi...A loose coupling method is used to solve the electromagnetic tube bulging. ANSYS/ EMAG is used to model the time varying electromagnetic field with the discharge current used as excitation, in order to obtain the radial and axial magnetic pressure acting on the tube, the magnetic pressure is then used as boundary conditions to model the high velocity deformation of tube with DYNAFORM, The radial magnetic pressure on the tube decreases from the center to the tube end, axial magnetic pressure is greater near the location equal to the coil height and slight in the other region. The radial displacement of deformed workpicces is distributed uniformly near the tube center and decreases from the center to the end; Deformation from the location equal to coil height to the tube end is little. This distribution is consistent with the distribution of radial pressure; Effect of the axial magnetic pressure on deformation can be ignored, The calculated results show well agreements with the experimental results.展开更多
In a fusion reactor, the edge localized mode（ELM） coil has a mitigating effect on the ELMs of the plasma. The coil is placed close to the plasma between the vacuum vessel and the blanket to reduce its design power a...In a fusion reactor, the edge localized mode（ELM） coil has a mitigating effect on the ELMs of the plasma. The coil is placed close to the plasma between the vacuum vessel and the blanket to reduce its design power and improve its mitigating ability. The coil works in a high-temperature,high-nuclear-heat and high-magnetic-field environment. Due to the existence of outer superconducting coils, the coil is subjected to an alternating electromagnetic force induced by its own alternating current and the outer magnetic field. The design goal for the ELM coil is to maintain its structural integrity in the multi-physical field. Taking as an example the middle ELM coil（with flexible supports） of ITER（the International Thermonuclear Fusion Reactor）, an electromagnetic–thermal–structural coupling analysis is carried out using ANSYS. The results show that the flexible supports help the three-layer casing meet the static and fatigue design requirements. The structural design of the middle ELM coil is reasonable and feasible. The work described in this paper provides the theoretical basis and method for ELM coil design.展开更多
An online partial discharge(PD) measurement performed on a high voltage direct current(HVDC) wall bushing successfully identified the presence of internal discharges.The wall bushing is a sulfur hexafluoride gas-insul...An online partial discharge(PD) measurement performed on a high voltage direct current(HVDC) wall bushing successfully identified the presence of internal discharges.The wall bushing is a sulfur hexafluoride gas-insulated bushing,rated for 500 kV dc and terminated on a thyristor-controlled HVDC converter bridge.The measurement of PD within the HVDC station environment is particularly challenging due to the high levels of electromagnetic noise caused by thyristor switching events and external air-corona from the neighboring high-voltage equipment.An additional challenge is the""mixed"voltage stress on the bushing insulation,which has both ac and dc high-voltage components.There are also fast transients during the firing of thyristors in the HVDC conversion process that cause added stress to the insulation.As a result,the analysis and interpretation of PD data for HVDC equipment is more complex;PD pulses may occur in response to the ac,dc,or switching transient voltage stresses.In this paper,an online PD measurement strategy for noise filtering and isolation of PD sources within the bushing are discussed.The PD measurement data is plotted on a phase-resolved diagram where the line supply power cord voltage was used as a reference. The phase-resolved diagram appears to suggest that the fast transients,caused during switching,trigger some PD events.Measurements were also performed with the aid of a modern PD measurement instrument having noise separation capabilities.The findings from the online PD measurements are verified with physical evidence,found after the bushing was removed from service,suggested internal PD had occurred inside the bushing.展开更多
This paper reports on experimental study of the microwave properties of a composite material consisting of ferrite and copper wires. It finds that the slim ferrite rods can modify the magnetic field distribution throu...This paper reports on experimental study of the microwave properties of a composite material consisting of ferrite and copper wires. It finds that the slim ferrite rods can modify the magnetic field distribution through their anisotropy, so that the ferrite＇s negative influence on the copper wires＇ plasma will be reduced. Left-handed properties are observed even in the specimen with close stuck ferrite rods and copper wires.展开更多
We propose a numerical solution of Faraday＇s law of induction based on the knowledge of the time-varying, non-uniform vector potential inside arbitrarily shaped electrical coils. The vector potential can be related t...We propose a numerical solution of Faraday＇s law of induction based on the knowledge of the time-varying, non-uniform vector potential inside arbitrarily shaped electrical coils. The vector potential can be related to the magnetic induction which yields the well-known form of Faraday＇s law. The algorithm applies for non-retarding fields within the quasi-stationary regime. The model is intended to help to understand the behavior of electromagnetic fields inside the discharge chambers of radio-frequency ion thrusters. This provides a basis for modeling an inductively-coupled plasma which is kept burning by absorbing electromagnetic energy. In the long run, this plasma model will be used to support development processes of electric and electronic control devices which are needed for driving radio-frequency ion thrusters more efficiently. To predict the induced radio frequency fields more precisely, the skin effect along the coil wire is modeled. Furthermore, an impedance model of the coil, which incorporates the skin effect, is introduced. The simulated data are compared to measured values obtained by a generic electric field probe. Although the probe was uncalibrated, the observed values were highly similar to the expected values as determined by the numerical solution.展开更多
Dynamic characteristics of large permanent magnet direct‐drive generators(PMDGs)considering electromagnetic–structural coupling effects are analyzed in this study.Using the conformal mapping method,the scalar magnet...Dynamic characteristics of large permanent magnet direct‐drive generators(PMDGs)considering electromagnetic–structural coupling effects are analyzed in this study.Using the conformal mapping method,the scalar magnetic potential of the air gap magnetic field considering the slot effect is calculated.On the basis of the discrete current element and magnetic equivalent circuit model,the local magnetic saturation effect of the stator and rotor is quantitatively simulated and the air gap magnetic field intensity distribution is obtained via numerical simulation.A series of uniformly distributed equivalent electromagnetic springs are introduced to develop an electromagnetic–structural coupling finite element PMDG model.The proposed air gap field analysis method is verified by the finite element analysis results.On the basis of the test platform for the Goldwind 1.5MW PMDG,both modal and dynamic response tests for the stator/rotor coupling system are conducted,and the results are compared with the natural frequencies,mode shapes,and vibration responses obtained using the numerical model.The effects of the air gap length and rotor speed on the natural frequencies of the coupling system are analyzed.The proposed model has the potential to accurately evaluate the PMDG vibration energy,avoiding resonance points,and maintaining stable operations of the unit.展开更多
In urban power networks,a common practice is to bond numerous high-voltage cable circuits to a single grounding grid located in underground tunnels,primarily for reasons of installation convenience.In these situations...In urban power networks,a common practice is to bond numerous high-voltage cable circuits to a single grounding grid located in underground tunnels,primarily for reasons of installation convenience.In these situations,excessively high levels of sheath currents were often detected during routine inspections,but no electrical faults were found to be responsible.Previous publications ignored the currents flowing through the shared grounding points into the closed sheath loops of different circuits.In this paper,a mathematical model is established for the current circulating among sheath loops of different circuits,and the factors influencing the circulating current were analysed.The abnormal excessive sheath current is demonstrated to be an increase in the circulating current due to the combined effect of electromagnetic coupling and the shared grounding grid.The circulating current depends on the induced voltages which,in turn,depends on the cable layouts and load currents.The effects of these factors are evaluated in various scenarios.The increase of the circulating current is verified in a field case where four electrically healthy cable circuits sharing the same grounding points were found to have abnormal excessive sheath currents.展开更多
It is vital to study the electromagnetic coupling to shielded cable for improving electromagnetic antiinterference ability of secondary equipment in a substation.As a hybrid of method of moment(MoM)and transmission li...It is vital to study the electromagnetic coupling to shielded cable for improving electromagnetic antiinterference ability of secondary equipment in a substation.As a hybrid of method of moment(MoM)and transmission line method,a frequency domain model is put forward to study the near field coupling to shielded cable due to the switching operation in substation.Compared with the results of EMTP,the proposed method has been proven correct.Furthermore,this method overcomes the disadvantage of EMTP,which is only applicable for transient analysis of parallel conductors.As an example,the presented method is applied to evaluating the electromagnetic interference(EMI)to the shielded cable,whose shield is grounded at both ends,due to the switching operation in 500 kV air insulation substation(AIS).展开更多
Cavity quantum electrodynamics （QED） is mainly re- searching the interaction process with a coherent atomic medium placed inside an optical resonant cavity, and has been of great interest in recent years. A well-kno...Cavity quantum electrodynamics （QED） is mainly re- searching the interaction process with a coherent atomic medium placed inside an optical resonant cavity, and has been of great interest in recent years. A well-known cavity- QED effect is the vacuum Rabi splitting or normal-mode splitting phenomenon that is under the strong coupling condition,展开更多
Plasmonic enhanced fluorescence(PEF)technology is a powerful strategy to improve the sensitivity of immunofluorescence microarrays(IFMA),however,current approaches to constructing PEF platforms are either expensive/ti...Plasmonic enhanced fluorescence(PEF)technology is a powerful strategy to improve the sensitivity of immunofluorescence microarrays(IFMA),however,current approaches to constructing PEF platforms are either expensive/time-consuming or reliant on specialized instruments.Here,we develop a completely alternative approach relying on a two-step protocol that includes the self-assembly of gold nanoparticles(GNPs)at the water–oil interface and subsequent annealing-assisted regulation of gold nanogap.Our optimized thermal-annealing GNPs(TA-GNP)platform generates adequate hot spots,and thus produces high-density electromagnetic coupling,eventually enabling 240-fold fluorescence enhancement of probed dyes in the near-infrared region.For clinical detection of human samples,TA-GNP provides super-high sensitivity and low detection limits for both hepatitis B surface antigen and SARS-CoV-2 binding antibody,coupled with a much-improved detection dynamic range up to six orders of magnitude.With fast detection,high sensitivity,and low detection limit,TA-GNP could not only substantially improve the outcomes of IFMA-based precision medicine but also find applications in fields of proteomic research and clinical pathology.展开更多
In this paper, an optimized transmission line model （OTL） for modeling transient behavior of grounding electrodes under lightning currents is presented. The soil ionization effect is considered in OTL, and all elect...In this paper, an optimized transmission line model （OTL） for modeling transient behavior of grounding electrodes under lightning currents is presented. The soil ionization effect is considered in OTL, and all electromagnetic couplings between dif- ferent parts of grounding electrode are also considered by selecting the size of segment conductor properly and calculating the mutual coupling parameters between segment conductors accurately. Comparing with the traditional transmission line model, the optimized model can be used to accurately predict the effective length and transient potential rise （TPR） of grounding elec- trodes. Transient behaviors of grounding electrodes are simulated by OTL and the results are in good agreement with those of the electromagnetic model proposed by Grcev, and experiment results performed by Electricit6 de France and Geri. Further- more, non-uniform discharging phenomenon of grounding electrode under lightning current is discussed, and the effective lengths of horizontal grounding electrode under lightning currents are presented.展开更多
In flux pumps,motors and superconducting magnets,the high temperature superconductor(HTS)coated conductor frequently carries a DC transport current when an oscillating magnetic field is present in the background.Under...In flux pumps,motors and superconducting magnets,the high temperature superconductor(HTS)coated conductor frequently carries a DC transport current when an oscillating magnetic field is present in the background.Under this circumstance,the interesting effect of dynamic resistance takes place,which can affect the operating performance of superconducting devices:heat accumulation can contribute to the rising temperature of the HTS tape and the dynamic resistance voltage can change accordingly.This article explores the time‐dependent development of the dynamic resistance voltage using a numerical modeling considering the thermal effects.After a validation against experimental results,this work investigates the effects of several factors on the structure of the HTS tape on the time‐dependent development of the dynamic resistance,thus providing insights toward a better understanding of the time‐dependent behavior of HTS tapes under external magnetic fields.展开更多
基金Supported by the National Natural Science Foundation of China(52374067)PetroChina Scientific Research and Technology Development Project(2021ZG12)PetroChina Technology Project(2023ZZ09).
文摘To address the challenges associated with existing separated zone oil production technologies,such as incompatibility with pump inspection operations,short effective working life,and poor communication reliability,an innovative electromagnetic coupling intelligent zonal oil production technology has been proposed.The core and accessory tools have been developed and applied in field tests.This technology employs a pipe string structure incorporation a release sub,which separates the production and allocation pipe strings.When the two strings are docked downhole,electromagnetic coupling enables close-range wireless transmission of electrical power and signals between the strings,powering multiple downhole intelligent production allocators(IPAs)and enabling two-way communication.Core tools adapted to the complex working conditions downhole were developed,including downhole electricity&signal transmission equipment based on electromagnetic coupling(EST),IPAs,and ground communication controllers(GCCs).Accessory tools,including large-diameter release sub anchor and cable-crossing packers,have also been technically finalized.Field tests conducted on ten wells in Daqing Oilfield demonstrated that the downhole docking of the two strings was convenient and reliable,and the EST worked stably.Real-time monitoring of flow rate,pressure and temperature in separate layers and regulation of zonal fluid production were also achieved.This technology has enhanced reservoir understanding and achieved practical production results of increased oil output with reduced water cut.
文摘A hybrid method combining finite difference time domain(FDTD)with topology network was presented to treat with electromagnetic couplings and transmissions in large spaces A generalized matrix euqation expressing the relations among wave vectors at every port of the network nodes was give Scattering characteristics and electromagnetic distributions of every node was calculated independently using FDTD A structure of irises in a waveguide was taken as numerical examples This hybrid method has more advantages than the traditional FDTD method which includes saving calculation time,saving memory spaces and being flexible in setting up FDTD grids
基金the Fund of Standardization for Technical Requirements of Industrial Networking and Test Verification System(No.2015ZXB004)
文摘This research presents a multi-band hybrid mobile phone antenna based on electromagnetic coupling,which can be applied to mobile handheld devices, occupying a small board space of 39.7 mm × 15.6 mm on the system circuit board. By adding resonant and coupled branch instead of multi-feed on the traditional bent antenna,this design provides four wide operating bands of 0.772—0.998 GHz, 1.540—1.600 GHz, 1.680—2.270 GHz and2.300—2.690 GHz with the hybrid feature of planar inverted-F antenna(PIFA), L-shape, U-shape and S-shape structures, which cover nine-band, i.e., GSM850, GSM900, GPS1575, DCS1800, PCS1900, IMT200, LTE2300,LTE2600 and Blue Tooth/Wi-Fi. Ansoft software HFSS is used in this research to make the antenna performance better and the operating principle of the proposed antenna is described in detail. Result of simulation reveals that the maximum gains of these four wide bands are 2.20,-0.99, 4.01 and 4.05 dBi, respectively. Moreover, this research also tests the return loss(S11) of the fabricated antenna with the vector network analyzer and the result is in accordance with the simulation result on the whole. There are four wide resonant frequencies which cover nine-band of wireless wide area network(WWAN), wireless local area network(WLAN) and long term evolution(LTE), when the available bandwidth is better than 6 d Bi return loss.
基金the financial support of the National Natural Science Foundation of China(No.22205165).
文摘Moisture-enabled electricity generation(MEG)has emerged as a promising sustainable energy harvesting technology,comparable to photovoltaics,thermoelectrics,and triboelectrics[1].MEGs generate electricity by converting the chemical potential of moisture into electric energy through interactions with hygroscopic materials and nanostructured interfaces.Unlike solar or thermal harvesters,MEGs operate continuously by utilizing ubiquitous atmospheric moisture,granting them unique spatial and temporal adaptability.Despite nearly a decade of progress and the exploration of diverse material systems for MEG,the overall output power remains significantly limited due to inherently low charge carrier concentrations and restricted ion diffusion fluxes[2].As a result,standalone MEG devices often deliver low and unstable output,limiting practical applications.To enhance performance and versatility,recent efforts have explored hybridization of MEG with other ambient energy sources such as triboelectric or thermoelectric effects.
基金supported by the Project of National Natural Science Foundation of China under Grant 52077122。
文摘With the continuous upgrading of traditional manufacturing industries and the rapid rise of emerging technology fields,the performance requirements for the permanent magnet synchronous motors(PMSMs)have become higher and higher.The importance of fast and accurate electromagnetic thermal coupling analysis of such motors becomes more and more prominent.In view of this,the surfacemounted PMSM(SPMSM)equipped with unequally thick magnetic poles is taken as the main object and its electromagnetic thermal coupling analytical model(ETc AM)is investigated.First,the electromagnetic analytical model(EAM)is studied based on the modified subdomain method.It realizes the fast calculation of key electromagnetic characteristics.Subsequently,the 3D thermal analytical model(TAM)is developed by combining the EAM,the lumped parameter thermal network method(LPTNM),and the partial differential equation of heat flux.It realizes the fast calculation of key thermal characteristics in 3D space.Further,the information transfer channel between EAM and TAM is built with reference to the intrinsic connection between electromagnetic field and temperature field.Thereby,the novel ETcAM is proposed to realize the fast and accurate prediction of electromagnetic and temperature fields.Besides,ETcAM has a lot to commend it.One is that it well accounts for the complex structure,saturation,and heat exchange behavior.Second,it saves a lot of computer resources.It offers boundless possibilities for initial design,scheme evaluation,and optimization of motors.Finally,the validity,accuracy,and practicality of this study are verified by simulation and experiment.
基金financially supported by the National Natural Science Foundation of China(22001156,22271178)the Youth Talent Fund of University Association for Science and Technology in Shaanxi,China(20210602)International Cooperation Key Project of Science and Technology Department of Shaanxi,China(2022KWZ-06).
文摘For enhancing the electromagnetic wave(EW)attenuation and adsorption,rational constructing and homogeneously distributing bimetallic electromagnetic coupling units in hollow structure is an effective way,but hard to achieve.Herein,a CoNi-doped hybrid zeolite imidazole framework was synthesized as precursor,which was further converted into a hollow CoNi-bimetallic doped molyb-denum carbide sphere(H-CoNi@MoC/NC)through a two-step etching and calcination strategy.At the loading amount of 15 wt%,a strong absorption of minimum reflection loss(RL_(min))of-60.05 dB at 7.2 GHz with the thickness of 3.1 mm and a wide effective ad-sorption bandwidth(EAB)of 3.52 GHz at the thickness of 2.5 mm were achieved,which was far beyond the reported MoC-based metallic hybrids.The crucial synergistic Co-Ni electromagnetic coupling effect in the composite was characterized,not only enhanc-ing the dipolar/interfacial polarization,but also promoting the impedance matching,displaying the optimized EW absorbing perfor-mance.
基金Project(51275211)supported by the National Natural Science Foundation of ChinaProject(11KJA580001)supported by the Natural Science Fund for Colleges and Universities in Jiangsu Province,ChinaProject(CXZZ12_0665)supported by the Postgraduate Innovation Natural Science Foundation of Jiangsu Province,China
文摘To improve high-speed road feel and enhance energetic efficiency of hydraulic power steering(HPS) system in heavy-duty vehicles, an electromagnetic slip coupling(ESC) was applied to the steering system, which regulated discharge flow of steering pump to realize variable assist characteristic as well as uniquely transfer on-demand power from engine to steering pump. The model of ESC was established and the dynamic characteristics of ESC were presented by the way of simulation and experiment. Upon the layout of the assist characteristics, output torque of ESC was derived. Based on the ESC model, the output torque characteristics of ESC were simulated under steering situation and straight driving situation, respectively. The consistency of simulated ESC output torque and the one deduced from assist characteristics verifies the correctness of the ESC dynamic model. To illustrate energy saving characteristics of ESC-HPS, energy consumption comparison of ESC-HPS and conventional HPS was carried out qualitatively and quantitatively. It follows that the energy consumption of ESC-HPS decreases by 50% compared with that of HPS.
文摘A loose coupling method is used to solve the electromagnetic tube bulging. ANSYS/ EMAG is used to model the time varying electromagnetic field with the discharge current used as excitation, in order to obtain the radial and axial magnetic pressure acting on the tube, the magnetic pressure is then used as boundary conditions to model the high velocity deformation of tube with DYNAFORM, The radial magnetic pressure on the tube decreases from the center to the tube end, axial magnetic pressure is greater near the location equal to the coil height and slight in the other region. The radial displacement of deformed workpicces is distributed uniformly near the tube center and decreases from the center to the end; Deformation from the location equal to coil height to the tube end is little. This distribution is consistent with the distribution of radial pressure; Effect of the axial magnetic pressure on deformation can be ignored, The calculated results show well agreements with the experimental results.
基金the Province Postdoctoral Foundation of Jiangsu(1501164B)the Technical Innovation Nurturing Foundation of Yangzhou University(2015CXJ016)China Postdoctoral Science Foundation(2016M600447)
文摘In a fusion reactor, the edge localized mode（ELM） coil has a mitigating effect on the ELMs of the plasma. The coil is placed close to the plasma between the vacuum vessel and the blanket to reduce its design power and improve its mitigating ability. The coil works in a high-temperature,high-nuclear-heat and high-magnetic-field environment. Due to the existence of outer superconducting coils, the coil is subjected to an alternating electromagnetic force induced by its own alternating current and the outer magnetic field. The design goal for the ELM coil is to maintain its structural integrity in the multi-physical field. Taking as an example the middle ELM coil（with flexible supports） of ITER（the International Thermonuclear Fusion Reactor）, an electromagnetic–thermal–structural coupling analysis is carried out using ANSYS. The results show that the flexible supports help the three-layer casing meet the static and fatigue design requirements. The structural design of the middle ELM coil is reasonable and feasible. The work described in this paper provides the theoretical basis and method for ELM coil design.
基金Manitoba Hydro for funding and supporting this research
文摘An online partial discharge(PD) measurement performed on a high voltage direct current(HVDC) wall bushing successfully identified the presence of internal discharges.The wall bushing is a sulfur hexafluoride gas-insulated bushing,rated for 500 kV dc and terminated on a thyristor-controlled HVDC converter bridge.The measurement of PD within the HVDC station environment is particularly challenging due to the high levels of electromagnetic noise caused by thyristor switching events and external air-corona from the neighboring high-voltage equipment.An additional challenge is the""mixed"voltage stress on the bushing insulation,which has both ac and dc high-voltage components.There are also fast transients during the firing of thyristors in the HVDC conversion process that cause added stress to the insulation.As a result,the analysis and interpretation of PD data for HVDC equipment is more complex;PD pulses may occur in response to the ac,dc,or switching transient voltage stresses.In this paper,an online PD measurement strategy for noise filtering and isolation of PD sources within the bushing are discussed.The PD measurement data is plotted on a phase-resolved diagram where the line supply power cord voltage was used as a reference. The phase-resolved diagram appears to suggest that the fast transients,caused during switching,trigger some PD events.Measurements were also performed with the aid of a modern PD measurement instrument having noise separation capabilities.The findings from the online PD measurements are verified with physical evidence,found after the bushing was removed from service,suggested internal PD had occurred inside the bushing.
基金Project supported by the National Natural Science Foundation of China (Grant No 50702005)the Specialized Research Fund for the Doctoral Program of Higher Education (Grant No 20070008027)the Beijing Municipal Commission of Education (Grant No SYS100080419)
文摘This paper reports on experimental study of the microwave properties of a composite material consisting of ferrite and copper wires. It finds that the slim ferrite rods can modify the magnetic field distribution through their anisotropy, so that the ferrite＇s negative influence on the copper wires＇ plasma will be reduced. Left-handed properties are observed even in the specimen with close stuck ferrite rods and copper wires.
文摘We propose a numerical solution of Faraday＇s law of induction based on the knowledge of the time-varying, non-uniform vector potential inside arbitrarily shaped electrical coils. The vector potential can be related to the magnetic induction which yields the well-known form of Faraday＇s law. The algorithm applies for non-retarding fields within the quasi-stationary regime. The model is intended to help to understand the behavior of electromagnetic fields inside the discharge chambers of radio-frequency ion thrusters. This provides a basis for modeling an inductively-coupled plasma which is kept burning by absorbing electromagnetic energy. In the long run, this plasma model will be used to support development processes of electric and electronic control devices which are needed for driving radio-frequency ion thrusters more efficiently. To predict the induced radio frequency fields more precisely, the skin effect along the coil wire is modeled. Furthermore, an impedance model of the coil, which incorporates the skin effect, is introduced. The simulated data are compared to measured values obtained by a generic electric field probe. Although the probe was uncalibrated, the observed values were highly similar to the expected values as determined by the numerical solution.
基金National Natural Science Foundation of China,Grant/Award Numbers:11872222,11902173State Key Laboratory of Tribology,Grant/Award Number:SKLT2021D11。
文摘Dynamic characteristics of large permanent magnet direct‐drive generators(PMDGs)considering electromagnetic–structural coupling effects are analyzed in this study.Using the conformal mapping method,the scalar magnetic potential of the air gap magnetic field considering the slot effect is calculated.On the basis of the discrete current element and magnetic equivalent circuit model,the local magnetic saturation effect of the stator and rotor is quantitatively simulated and the air gap magnetic field intensity distribution is obtained via numerical simulation.A series of uniformly distributed equivalent electromagnetic springs are introduced to develop an electromagnetic–structural coupling finite element PMDG model.The proposed air gap field analysis method is verified by the finite element analysis results.On the basis of the test platform for the Goldwind 1.5MW PMDG,both modal and dynamic response tests for the stator/rotor coupling system are conducted,and the results are compared with the natural frequencies,mode shapes,and vibration responses obtained using the numerical model.The effects of the air gap length and rotor speed on the natural frequencies of the coupling system are analyzed.The proposed model has the potential to accurately evaluate the PMDG vibration energy,avoiding resonance points,and maintaining stable operations of the unit.
基金Project of State Grid Corporation of China,Grant/Award Number:5700-202118195A-0-0-00。
文摘In urban power networks,a common practice is to bond numerous high-voltage cable circuits to a single grounding grid located in underground tunnels,primarily for reasons of installation convenience.In these situations,excessively high levels of sheath currents were often detected during routine inspections,but no electrical faults were found to be responsible.Previous publications ignored the currents flowing through the shared grounding points into the closed sheath loops of different circuits.In this paper,a mathematical model is established for the current circulating among sheath loops of different circuits,and the factors influencing the circulating current were analysed.The abnormal excessive sheath current is demonstrated to be an increase in the circulating current due to the combined effect of electromagnetic coupling and the shared grounding grid.The circulating current depends on the induced voltages which,in turn,depends on the cable layouts and load currents.The effects of these factors are evaluated in various scenarios.The increase of the circulating current is verified in a field case where four electrically healthy cable circuits sharing the same grounding points were found to have abnormal excessive sheath currents.
基金supported by the Scientific Funds for Outstanding Young Scientists of China (No.50325723)the Program for Changjiang Scholars and Innovative Research Team in University in China (No.IRT0515).
文摘It is vital to study the electromagnetic coupling to shielded cable for improving electromagnetic antiinterference ability of secondary equipment in a substation.As a hybrid of method of moment(MoM)and transmission line method,a frequency domain model is put forward to study the near field coupling to shielded cable due to the switching operation in substation.Compared with the results of EMTP,the proposed method has been proven correct.Furthermore,this method overcomes the disadvantage of EMTP,which is only applicable for transient analysis of parallel conductors.As an example,the presented method is applied to evaluating the electromagnetic interference(EMI)to the shielded cable,whose shield is grounded at both ends,due to the switching operation in 500 kV air insulation substation(AIS).
基金supported by the National Natural Science Foundation of China under Grant Nos.61575112 and 61308121
文摘Cavity quantum electrodynamics （QED） is mainly re- searching the interaction process with a coherent atomic medium placed inside an optical resonant cavity, and has been of great interest in recent years. A well-known cavity- QED effect is the vacuum Rabi splitting or normal-mode splitting phenomenon that is under the strong coupling condition,
基金supported by the National Natural Science Foundation of China(Nos.21975098 and 22275071)the program for JLU Science and Technology Innovative Research Team(No.2017TD-06)the opening funds of State Key Laboratory of Applied Optics,Changchun Institute of Optics,Fine Mechanics and Physics,Chinese Academy of Science,and the China Postdoctoral Science Foundation(Nos.2020TQ0119 and 2020M681046).
文摘Plasmonic enhanced fluorescence(PEF)technology is a powerful strategy to improve the sensitivity of immunofluorescence microarrays(IFMA),however,current approaches to constructing PEF platforms are either expensive/time-consuming or reliant on specialized instruments.Here,we develop a completely alternative approach relying on a two-step protocol that includes the self-assembly of gold nanoparticles(GNPs)at the water–oil interface and subsequent annealing-assisted regulation of gold nanogap.Our optimized thermal-annealing GNPs(TA-GNP)platform generates adequate hot spots,and thus produces high-density electromagnetic coupling,eventually enabling 240-fold fluorescence enhancement of probed dyes in the near-infrared region.For clinical detection of human samples,TA-GNP provides super-high sensitivity and low detection limits for both hepatitis B surface antigen and SARS-CoV-2 binding antibody,coupled with a much-improved detection dynamic range up to six orders of magnitude.With fast detection,high sensitivity,and low detection limit,TA-GNP could not only substantially improve the outcomes of IFMA-based precision medicine but also find applications in fields of proteomic research and clinical pathology.
文摘In this paper, an optimized transmission line model （OTL） for modeling transient behavior of grounding electrodes under lightning currents is presented. The soil ionization effect is considered in OTL, and all electromagnetic couplings between dif- ferent parts of grounding electrode are also considered by selecting the size of segment conductor properly and calculating the mutual coupling parameters between segment conductors accurately. Comparing with the traditional transmission line model, the optimized model can be used to accurately predict the effective length and transient potential rise （TPR） of grounding elec- trodes. Transient behaviors of grounding electrodes are simulated by OTL and the results are in good agreement with those of the electromagnetic model proposed by Grcev, and experiment results performed by Electricit6 de France and Geri. Further- more, non-uniform discharging phenomenon of grounding electrode under lightning current is discussed, and the effective lengths of horizontal grounding electrode under lightning currents are presented.
基金the National Natural Science Foundation of China(Grant No.52107022).
文摘In flux pumps,motors and superconducting magnets,the high temperature superconductor(HTS)coated conductor frequently carries a DC transport current when an oscillating magnetic field is present in the background.Under this circumstance,the interesting effect of dynamic resistance takes place,which can affect the operating performance of superconducting devices:heat accumulation can contribute to the rising temperature of the HTS tape and the dynamic resistance voltage can change accordingly.This article explores the time‐dependent development of the dynamic resistance voltage using a numerical modeling considering the thermal effects.After a validation against experimental results,this work investigates the effects of several factors on the structure of the HTS tape on the time‐dependent development of the dynamic resistance,thus providing insights toward a better understanding of the time‐dependent behavior of HTS tapes under external magnetic fields.
