Zinc-ion supercapacitors(ZISCs)have received considerable interest for energy storage because of their low cost,high safety,and minimal environmental impact.However,they have a low energy density and poor cycling perf...Zinc-ion supercapacitors(ZISCs)have received considerable interest for energy storage because of their low cost,high safety,and minimal environmental impact.However,they have a low energy density and poor cycling performance.The design of a better cathode material is needed to overcome these limitations.A simple method was used to synthesize binder-free electrochemically exfoliated carbon paper(EECP)which modifies the surface of the paper by introducing oxygen functional groups and thus improves its pseudocapacitance.When used in a Zn-ion supercapacitor(ZISC),an EECPbased cathode provides a large surface area and quick charge transfer.As a result,the ZISC had remarkable charge storage properties and had a dominant capacitive-type charge storage mechanism with 78.8%retention of capacity at 10 mV/s of the total storage.Furthermore,at 1 A/g,the EECP electrode had a maximum capacitance of 252.5 F/g.The EECP electrode retained 81.7%of its capacitance after 10000 cycles,indicating its promise for use in the growing renewable energy sector.A ZISC was also constructed using EECP as the positive electrode and Zn as the negative electrode with a 1 mol L^(−1) ZnSO_(4) electrolyte.It had a capacitance of 186.22 F/g at 1 A/g and a 97.01%retention rate after 10000 cycles.It also had an excellent energy density of 46.6 Wh/kg at a power density of 500.4 W/kg.The material is therefore suitable for use in high-rate next-generation ZISCs.展开更多
Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of va...Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of vanadium species on conventional carbon electrodes remains a major limitation to their performance.We investigated the deposition of carbon black,carbon nanotubes,and electrochemically exfoliated graphene(Exf-Gr)onto thermally-activated carbon paper(ACP)by spray coating to increase the electrode electrocatalytic activity.The modified electrodes were characterized using scanning electron microscopy,X-ray diffraction,Raman spectroscopy,X-ray photoelectron microscopy,and surface area analysis,while their electrochemical properties were evaluated by cyclic voltammetry,electrochemical impedance spectroscopy,and singlecell VRFB testing.Among the modified electrodes,Exf-Gr/ACP had the best performance,achieving a 2.9-fold reduction in charge transfer resistance compared to pristine ACP and delivering 2.5 times the discharge capacity in single-cell tests.This improvement is attributed to Exf-Gr’s high surface area,favorable catalytic activity,and excellent dispersion on the ACP substrate.Surface modification with electrochemically exfoliated graphene is a highly effective strategy for improving the electrode performance in VRFB systems,with significant implications for large-scale energy storage.展开更多
The development of shape-customizable and bulk flexible electrochemical devices through processing technologies as versatile as those used for plastics promises to revolutionize the future of battery technology.Howeve...The development of shape-customizable and bulk flexible electrochemical devices through processing technologies as versatile as those used for plastics promises to revolutionize the future of battery technology.However,this pursuit has been fundamentally hindered by the absence of transformative battery materials capable of delivering the necessary electrochemical functions,robust interface adhesion,and,crucially,the suitable rheological properties required for on-demand shaping.In this work,we introduce a concept of a multifunctional plasticine electrode matrix(PEM)featuring nano-interpenetrating networks(nano-IPN)to address this challenge.Utilizing the nonflammable liquid-electrolyte hydration combined with conductive nanomaterials,we have realized a PEM in the form of a multifunctional nanocomposite that integrates ion and electron conduction,component binding,non-flammability,and plasticine-like moldability.With this PEM,we have successfully fabricated a variety of bulk-flexible electrodes with high mass loading of active material(AM)(>70 wt%)using industry-friendly extrusion and compression molding techniques.Moreover,these high AM-loading composite electrodes achieve an unparalleled bulk conformability and flexibility,remaining structurally intact even under severe mechanical stress.Ultimately,we have successfully produced shape-patternable and flexible batteries via extrusion molding.This study underscores the potential of the PEM to revolutionize battery microstructures,interfaces,manufacturing processes,and performance characteristics.展开更多
Strategies for achieving high-energy-density lithium-ion batteries include using high-capacity materials such as high-nickel NCM,increasing the active material content in the electrode by utilizing high-conductivity c...Strategies for achieving high-energy-density lithium-ion batteries include using high-capacity materials such as high-nickel NCM,increasing the active material content in the electrode by utilizing high-conductivity carbon nanotubes(CNT)conductive materials,and electrode thickening.However,these methods are still limited due to the limitation in the capacity of high-nickel NCM,aggregation of CNT conductive materials,and nonuniform material distribution of thick-film electrodes,which ultimately damage the mechanical and electrical integrity of the electrode,leading to a decrease in electrochemical performance.Here,we present an integrated binder-CNT composite dispersion solution to realize a high-solids-content(>77 wt%)slurry for high-mass-loading electrodes and to mitigate the migration of binder and conductive additives.Indeed,the approach reduces solvent usage by approximately 30%and ensures uniform conductive additive-binder domain distribution during electrode manufacturing,resulting in improved coating quality and adhesive strength for high-mass-loading electrodes(>12 mAh cm^(−2)).In terms of various electrode properties,the presented electrode showed low resistance and excellent electrochemical properties despite the low CNT contents of 0.6 wt%compared to the pristine-applied electrode with 0.85 wt%CNT contents.Moreover,our strategy enables faster drying,which increases the coating speed,thereby offering potential energy savings and supporting carbon neutrality in wet-based electrode manufacturing processes.展开更多
Objective:To investigate the spatial gradient of intraoperative impedance across the cochlear electrode array in pediatric cochlear implant recipients and assess its potential as a physiological indicator for the elec...Objective:To investigate the spatial gradient of intraoperative impedance across the cochlear electrode array in pediatric cochlear implant recipients and assess its potential as a physiological indicator for the electrode-neural interface.Methods:A prospective observational study involving 56 pediatric patients underwent cochlear implantation with Cochlear Nucleus devices.Intraoperative polarized impedance and electrically evoked compound action potential(ECAP)threshold were recorded across all 1232 electrodes using AutoNRT software.Eight electrodes with open-or short-circuit were excluded,leaving 1,224 for analysis.Impedance values were categorized by cochlear region(basal,middle,apical),and electrodes with elevated impedance(10-20 kΩ)were analyzed for regional distribution and clinical relevance.Data were analyzed for spatial patterns and correlation with the ECAP threshold profiles.Results:A consistent basal-to-apical increase in impedance was observed(7.7±1.9,9.2±1.4,10.8±1.5 kΩ;p<0.001).Impedance and ECAP threshold were weakly correlated(ρ=-0.20,p<0.001;β=-1.26,p<0.001),with a positive association in the apical region(ρ=0.12,p=0.048).Electrodes with higher impedance(1020 kΩ)were less likely to show elevated or absent TNRT(OR=0.175,p=0.02).The impedance gradient persisted across age groups and was significantly correlated with ECAP threshold patterns.Conclusion:Intraoperative impedance monitoring reveals a strong and physiologically consistent gradient,with higher values in apical electrodes.This gradient reflects anatomical and tissue interface variations,which may offer a valuable physiological indicator for intraoperative electrode positioning and neural interface integrity.展开更多
Thermocells are garnering increasing attention as a promising thermoelectric technology for harvesting low-grade heat.However,their performance is often limited by the scarcity of high-performance redox couples that p...Thermocells are garnering increasing attention as a promising thermoelectric technology for harvesting low-grade heat.However,their performance is often limited by the scarcity of high-performance redox couples that possess both high thermopower and rapid redox kinetics.This work addresses this challenge by leveraging our recently developed copper(Ⅰ/Ⅱ)(Cu^(+)/Cu^(2+))redox couple.We significantly enhance the performance of Cu-based liquid thermocells by integrating a thermosensitive crystallization process with etched carbon cloth electrodes,achieving synergistic improvements in thermodynamic and kinetic performance.The thermosensitive crystallization process establishes a persistent Cu^(2+)concentration gradient,boosting the thermopower from 1.47 to 2.93 mV K^(-1).Moreover,the etched carbon cloth electrodes provide a larger electroactive surface area and demonstrate a higher current density.Consequently,the optimized Cu^(+)/Cu^(2+)system achieved an exceptional normalized power density P_(max)(ΔT)^(-2)of 3.97 mW m^(-2)K^(-2).A thermocell module comprised of 20 cells directly power various electronic devices at a temperature difference of 40 K.This work successfully exhibits potential of Cu^(+)/Cu^(2+)redox couple in thermoelectric conversion and introduces a valuable redox couple for highperformance thermocells.展开更多
This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0...This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.1)Mo_(0.05)O_(3-δ)(B S CNM_(0.05)),Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.05)Mo_(0.1)O_(3-δ)(BSCNM_(0.1)),and Ba_(0.6)Sr_(0.4)Co_(0.85)Mo_(0.15)O_(3-δ)(BSCM)—with Mo doping contents of 5mol%,10mol%,and15mol%,respectively,were successfully prepared using the sol-gel method.The effects of Mo doping on the crystal structure,conductivity,thermal expansion coefficient,oxygen reduction reaction(ORR)activity,and electrochemical performance were systematically evaluated using X-ray diffraction analysis,thermally induced characterization,electrochemical impedance spectroscopy,and single-cell performance tests.The results revealed that Mo doping could improve the conductivity of the materials,suppress their thermal expansion effects,and significantly improve the electrochemical performance.Surface chemical state analysis using X-ray photoelectron spectroscopy revealed that 5mol%Mo doping could facilitate a high adsorbed oxygen concentration leading to enhanced ORR activity in the materials.Density functional theory calculations confirmed that Mo doping promoted the ORR activity in the materials.At an operating temperature of 600℃,the BSCNM_(0.05)cathode material exhibited significantly enhanced electrochemical impedance characteristics,with a reduced area specific resistance of 0.048Ω·cm~2,which was lower than that of the undoped BSCN matrix material by 32.39%.At the same operating temperature,an anode-supported single cell using a BSCNM_(0.05)cathode achieved a peak power density of 1477 mW·cm^(-2),which was 30.71%,56.30%,and 171.50%higher than those of BSCN,BSCNM_(0.1),and B SCM,respectively.The improved ORR activity and electrochemical performance of BSCNM_(0.05)indicate that it can be used as a cathode material in low-temperature solid oxide fuel cells.展开更多
To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as wel...To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as well.Herein,we suggest an effective approach to control the micropore structure of silicon oxide(SiO_(x))/artificial graphite(AG)composite electrodes using a perforated current collector.The electrode features a unique pore structure,where alternating high-porosity domains and low-porosity domains markedly reduce overall electrode resistance,leading to a 20%improvement in rate capability at a 5C-rate discharge condition.Using microstructure-resolved modeling and simulations,we demonstrate that the patterned micropore structure enhances lithium-ion transport,mitigating the electrolyte concentration gradient of lithium-ion.Additionally,perforating current collector with a chemical etching process increases the number of hydrogen bonding sites and enlarges the interface with the SiO_(x)/AG composite electrode,significantly improving adhesion strength.This,in turn,suppresses mechanical degradation and leads to a 50%higher capacity retention.Thus,regularly arranged micropore structure enabled by the perforated current collector successfully improves both rate capability and cycle life in SiO_(x)/AG composite electrodes,providing valuable insights into electrode engineering.展开更多
Ceramic cells promise ideal energy conversion and storage devices,making the development of efficient and robust air electrodes crucial for their application.In this study,a Ba_(0.4)Sr_(0.5)Cs_(0.1)Co_(0.7)Fe_(0.2)Nb_...Ceramic cells promise ideal energy conversion and storage devices,making the development of efficient and robust air electrodes crucial for their application.In this study,a Ba_(0.4)Sr_(0.5)Cs_(0.1)Co_(0.7)Fe_(0.2)Nb_(0.1)O_(3−δ)(BSCCFN)air electrode,based on Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3−δ)(BSCF),is designed using a perovskite A-B-site ionic Lewis acid strength(ISA)polarization distribution strategy and is successfully applied in both oxygen-ion conducting solid oxide fuel cells(O-SOFCs)and proton-conducting reversible protonic ceramic cells(R-PCCs).When BSCCFN is used as the air electrode in O-SOFCs,a peak power density(PPD)of 1.45 W cm^(−2)is achieved at 650°C,whereas in R-PCCs,a PPD of 1.13 W cm^(−2)and a current density of−1.8 A cm^(−2)at 1.3 V are achieved at the same temperature and show stable reversibility over 100 h.Experimental measurements and theoretical calculations demonstrate that low-ISA Cs+doping accelerates the reaction kinetics of both oxygen ions and protons,while high-ISA Nb^(5+)doping enhances electrode stability.The synergistic effect of Cs^(+)and Nb^(5+)co-doping in the BSCCFN electrode lies in the ISA polarization distribution,which weakens the Co/Fe–O bond covalency,thereby promoting oxygen vacancy formation and facilitating the conduction of oxygen ions and protons.展开更多
Economical,stable,and corrosion-resistant catalytic electrodes are still urgently needed for the oxygen evolution reaction(OER)in water and seawater.Herein,a mild electroless plating strategy is used to achieve large-...Economical,stable,and corrosion-resistant catalytic electrodes are still urgently needed for the oxygen evolution reaction(OER)in water and seawater.Herein,a mild electroless plating strategy is used to achieve large-scale preparation of the“integrated”phosphorus-based precatalyst(FeP-NiP)on nickel foam(NF),which is in situ reconstructed into a highly active and corrosion-resistant(Fe)NiOOH phase for OER.The interaction between phosphate anions(PO_(x)^(y-))and iron ions(Fe^(3+))tunes the electronic structure of the catalytic phase to further enhance OER kinetics.The integrated FeP-NiP@NF electrode exhibits low overpotentials for OER in alkaline water/seawater,requiring only 275/289,320/336,and 349/358 mV to reach 0.1,0.5,and 1.0 A cm^(−2),respectively.The in situ reconstructed PO_(x)^(y-)anion electrostatically repels Cl−in seawater electrolytes,allowing stable operation for over 7 days at 1.0 A cm^(−2) in extreme electrolytes(1.0 M KOH+seawater and 6.0 M KOH+seawater),demonstrating industrial-level stability.This study overcomes the complex synthesis limitations of P-based materials through innovative material design,opening new avenues for electrochemical energy conversion.展开更多
In this study,artificial neural networks(ANNs)were implemented to determine design parameters for an impressed current cathodic protection(ICCP)prototype.An ASTM A36 steel plate was tested in 3.5%NaCl solution,seawate...In this study,artificial neural networks(ANNs)were implemented to determine design parameters for an impressed current cathodic protection(ICCP)prototype.An ASTM A36 steel plate was tested in 3.5%NaCl solution,seawater,and NS4 using electrochemical impedance spectroscopy(EIS)to monitor the evolution of the substrate surface,which affects the current required to reach the protection potential(Eprot).Experimental data were collected as training datasets and analyzed using statistical methods,including box plots and correlation matrices.Subsequently,ANNs were applied to predict the current demand at different exposure times,enabling the estimation of electrochemical parameters(limiting voltage values)that can be used to optimize a self-regulating ICCP system.The obtained electrochemical parameters were then used,through Particle Swarm Optimization(PSO),to fine-tune an ANN-based proportional-integral-derivative(PID)controller for the ICCP system.展开更多
An Ag2O/Ag electrode was prepared through the electrochemical oxidation of sterling silver.This electrode was used as a cathodic electron acceptor in a microbial fuel cell(MFC).The Ag2O/Ag electrode was characterized ...An Ag2O/Ag electrode was prepared through the electrochemical oxidation of sterling silver.This electrode was used as a cathodic electron acceptor in a microbial fuel cell(MFC).The Ag2O/Ag electrode was characterized by scanning electron microscopy,X-ray powder diffraction and linear sweep voltammetry.The maximum voltage output of the MFC with the AgaO/Ag cathode was maintained at between 0.47 and 0.5 V in 100 cycles,indicating the good regenerative capacity of the Ag2O/Ag electrode.The overpotential loss for silver oxide was 0.021-0.006 V,and the maximum power output,open circuit potential and short circuit current of the MFC were 1.796 W m^-3,0.559 V and 9.3375 A m^-3,respectively.The energy required for electrochemical reoxidation ranged from 40%to 55%of the energy produced by the MFC.Results indicated that the AgeO/Ag electrode could be used as a cathodic electron acceptor in MFCs with excellent stability.展开更多
The cathodic behavior at tungsten electrode in Na3AlF6-Al2O3-LiF-based melt with various cryolite ratios was investigated by means of potentiodynamic cathodic polarization, potentiostatic electrolysis, chronopotentiom...The cathodic behavior at tungsten electrode in Na3AlF6-Al2O3-LiF-based melt with various cryolite ratios was investigated by means of potentiodynamic cathodic polarization, potentiostatic electrolysis, chronopotentiometry, and open-circuit chronopotentiometry. The results show that the formation process of Al-W intermetallic compound is controlled by both diffusion and charge transfer when the cryolite ratio is below 2.5, and is completely controlled by diffusion when cryolite ratio is above2.5. The deposition process of metal aluminum is completely charge-transfer controlled. Sodium vapor releases along with the deposition of metal aluminum as crylite ratio increases, which leads to a great influence on current efficiency. When the cryolite ratio is lower than 2.0, the critical cathodic current density of deposited aluminum at tungsten electrode is about 150 mA·cm^（-2）,but the current density is above 200 mA·cm^（-2） under other experimental conditions. A higher cryolite ratio can cause a higher cathodic overvoltage. The relative content of Al layer is higher with the decrease of cryolite ratio, and Al layer easily strips into the molten salt when the cryolite ratio is higher than 2.5.展开更多
The electrochemical formation of Sc-Cu alloy was investigated in LiF-CaF_(2) eutectic molten salt employing various electrochemical methods.Cyclic voltammetry and square wave voltammetry indicate that the reduction of...The electrochemical formation of Sc-Cu alloy was investigated in LiF-CaF_(2) eutectic molten salt employing various electrochemical methods.Cyclic voltammetry and square wave voltammetry indicate that the reduction of scandium(Ⅲ) on the tungsten electrode is a one-step reduction process with three electrons transfer.And underpotential deposition of scandium on the copper electrode occurs owing to the depolarization effect,i.e.,forming Sc-Cu intermetallic compounds.The thermodynamic properties of the Sc-Cu intermetallic compounds ScCu_(4),ScCu_(2),and ScCu in the temperature range of 1153-1223 K were estimated by open-circuit chronopotentiometry.Moreover,the Sc-Cu alloys were prepared by potentiostatic electrolysis and characterized by optical microscope,X-ray diffraction,scanning electron microscopy,and energy dispersive spectroscopy.The results reveal that only Sc-Cu alloy composed of Cu-ScCu_(4) can be synthesized at low cathodic current density and above eutectic temperature.展开更多
High-entropy materials represent a new category of high-performance materials,first proposed in 2004 and extensively investigated by researchers over the past two decades.The definition of high-entropy materials has c...High-entropy materials represent a new category of high-performance materials,first proposed in 2004 and extensively investigated by researchers over the past two decades.The definition of high-entropy materials has continuously evolved.In the last ten years,the discovery of an increasing number of high-entropy materials has led to significant advancements in their utilization in energy storage,electrocatalysis,and related domains,accompanied by a rise in techniques for fabricating high-entropy electrode materials.Recently,the research emphasis has shifted from solely improving the performance of high-entropy materials toward exploring their reaction mechanisms and adopting cleaner preparation approaches.However,the current definition of high-entropy materials remains relatively vague,and the preparation method of high-entropy materials is based on the preparation method of single metal/low-or medium-entropy materials.It should be noted that not all methods applicable to single metal/low-or medium-entropy materials can be directly applied to high-entropy materials.In this review,the definition and development of high-entropy materials are briefly reviewed.Subsequently,the classification of high-entropy electrode materials is presented,followed by a discussion of their applications in energy storage and catalysis from the perspective of synthesis methods.Finally,an evaluation of the advantages and disadvantages of various synthesis methods in the production process of different high-entropy materials is provided,along with a proposal for potential future development directions for high-entropy materials.展开更多
Manganese is an essential micronutrient for all organisms;however at high concentrations it has a toxic effect. Manganese toxicity is a serious constraint to crop cultivation since it is taken-up by plants and can eas...Manganese is an essential micronutrient for all organisms;however at high concentrations it has a toxic effect. Manganese toxicity is a serious constraint to crop cultivation since it is taken-up by plants and can easily be passed into the food chain again causing symptoms of Parkinson’s disease. A fully validated square-wave adsorptive cathodic stripping voltammetry method has been developed for determination of Mn (II) as a complex with 2-(5’-bromo-2’-pyridylazo) 5-diethylaminophenol in aqueous solutions using a carbon paste electrode (CPE) modified with montmorillonite-Na clay. The results showed that the modified CPE (90% (w/w) graphite powder and 10% (w/w) montmorillonite-Na clay) exhibited excellent electrochemical activity towards the investigated Mn (II) complex in acetate buffer of pH = 5.0. Factors affecting the performance of the modified carbon paste electrode and the sensitivity of the described square- wave stripping voltammetry method, including the electrode composition, concentration of ligand, pulse parameters and preconcentration conditions were examined. A detection limit (S/N = 3) of 0.015μg·L-1 (2.73 × 10-10 mol·L-1) Mn (II) was achieved when a preconcentration time of 240 s was applied. Insignificant interferences from various inorganic and organic species were estimated. The described square-wave adsorptive cathodic stripping voltammetry method coupled with the modified carbon paste electrode has been successfully applied to Mn (II) analysis in different water samples.展开更多
Mechanism of cathodic process on nickel electrodeposition from ammonia-ammonium chloride solutions was studied by Tafel polarization curves,linear sweep voltammetry(LSV),cyclic voltammograms(CV)and chronopotentiometry...Mechanism of cathodic process on nickel electrodeposition from ammonia-ammonium chloride solutions was studied by Tafel polarization curves,linear sweep voltammetry(LSV),cyclic voltammograms(CV)and chronopotentiometry(CE)technologies.In the electrolyte with 1.0 mol·L^(-1) NiCl_(2)·6H_(2)O,4.0 mol·L^(-1) NH_(3)·H_(2)O and2.5 mol·L^(-1) NH4Cl,nickel ion mainly complexed with ammonia and almost no free nickel ion could be found.It is confirmed that the dominant form of nickel ammonia complex ion in the system is Ni(NH_(3))_(4)^(2+)by measuring the equilibrium potential of the electrode at various concentrations of ammonia.The species of Ni(NH_(3))42+turns into Ni(NH_(3))_(2)^(2+)during pre-chemical reaction step before discharging reduction reaction.Then,Ni(NH_(3))_(2)^(2+)discharges at the cathodic interface to form metal nickel deposit directly.Nucleation process is involved during nickel electrodeposition according to CV results.The reduction reaction of Ni(NH_(3))_(2)^(2+)is irreversible which is controlled by diffusion step.Other processes are also accompanied during the electrodeposition process,except for the diffusioncontrolled process.展开更多
Solid oxide cells(SOCs)are emerging devices for efficient energy storage and conversion.However,during SOC operation,gaseous chromium(Cr)species released from Fe-Cr alloy interconnect can lead to Cr deposition and poi...Solid oxide cells(SOCs)are emerging devices for efficient energy storage and conversion.However,during SOC operation,gaseous chromium(Cr)species released from Fe-Cr alloy interconnect can lead to Cr deposition and poisoning of air electrodes,causing substantial degradation in electrochemical performance and compromising the longterm stability of SOCs.This mini-review examines the mechanism of Cr deposition and poisoning in air electrodes under both fuel-cell and electrolysis modes.Furthermore,emphasis is placed on the recent advancements in strategies to mitigate Cr poisoning,offering insights into the rational design and development of active and Cr-tolerant air electrodes for SOCs.展开更多
The low photoelectric conversion efficiency of photoelectrode is an important factor that limits the application in photoelectrochemical cathodic protection(PECCP)field for marine anti-corrosion of metallic structures...The low photoelectric conversion efficiency of photoelectrode is an important factor that limits the application in photoelectrochemical cathodic protection(PECCP)field for marine anti-corrosion of metallic structures.In this work,a photoelectrode of TiO_(2)/CdZnS/ZnS triple-phase heterojunction was fabricated by loading the narrow-band CdZnS associated with the broad-band ZnS via hydrothermal and continuous ion layer adsorption methods,respectively.The composite of CdZnS enhances the photoelectric conversion ability of TiO_(2),while the ZnS composite can prevent the CdZnS from photo-corrosion and suppress the spillover of the photogenerated electrons.The three-phase heterostructure effectively improves the PECCP performance on 316 L stainless steel(SS)under simulated solar irradiation,especially in 3.5 wt%NaCl solution without the sacrificial agent.In addition,the prepared TiO_(2)/CdZnS/ZnS photoelectrode also performs anti-biofouling effect evidenced by the high removal efficiency of Pseudomonas aeruginosa(P.aeruginosa),which can be attributed to the oxidizability of photogenerated holes.The TiO_(2)/CdZnS/ZnS triple-phase heterojunction with desirable performance is a promising semiconductor material for the applications of PECCP and anti-biofouling.展开更多
Reversible solid oxide cell(RSOC)is a new energy conversion device with significant applications,especially for power grid peaking shaving.However,the reversible conversion process of power generation/energy storage p...Reversible solid oxide cell(RSOC)is a new energy conversion device with significant applications,especially for power grid peaking shaving.However,the reversible conversion process of power generation/energy storage poses challenges for the performance and stability of air electrodes.In this work,a novel high-entropy perovskite oxide La_(0.2)Pr_(0.2)Gd_(0.2)Sm_(0.2)Sr_(0.2)Co_(0.8)Fe_(0.2)O_(3−δ)(HE-LSCF)is proposed and investigated as an air electrode in RSOC.The electrochemical behavior of HE-LSCF was studied as an air electrode in both fuel cell and electrolysis modes.The polarization impedance(Rp)of the HE-LSCF electrode is only 0.25Ω·cm^(2) at 800℃ in an air atmosphere.Notably,at an electrolytic voltage of 2 V and a temperature of 800℃,the current density reaches up to 1.68 A/cm^(2).The HE-LSCF air electrode exhibited excellent reversibility and stability,and its electrochemical performance remains stable after 100 h of reversible operation.With these advantages,HE-LSCF is shown to be an excellent air electrode for RSOC.展开更多
基金supported by National Natural Science Foundation of China(52472194)the Deanship of Research and Graduate Studies at King Khalid University through Large Research Project(RGP-2/687/46).
文摘Zinc-ion supercapacitors(ZISCs)have received considerable interest for energy storage because of their low cost,high safety,and minimal environmental impact.However,they have a low energy density and poor cycling performance.The design of a better cathode material is needed to overcome these limitations.A simple method was used to synthesize binder-free electrochemically exfoliated carbon paper(EECP)which modifies the surface of the paper by introducing oxygen functional groups and thus improves its pseudocapacitance.When used in a Zn-ion supercapacitor(ZISC),an EECPbased cathode provides a large surface area and quick charge transfer.As a result,the ZISC had remarkable charge storage properties and had a dominant capacitive-type charge storage mechanism with 78.8%retention of capacity at 10 mV/s of the total storage.Furthermore,at 1 A/g,the EECP electrode had a maximum capacitance of 252.5 F/g.The EECP electrode retained 81.7%of its capacitance after 10000 cycles,indicating its promise for use in the growing renewable energy sector.A ZISC was also constructed using EECP as the positive electrode and Zn as the negative electrode with a 1 mol L^(−1) ZnSO_(4) electrolyte.It had a capacitance of 186.22 F/g at 1 A/g and a 97.01%retention rate after 10000 cycles.It also had an excellent energy density of 46.6 Wh/kg at a power density of 500.4 W/kg.The material is therefore suitable for use in high-rate next-generation ZISCs.
基金supported by the University of Seoul’s 2025 Research Fund.
文摘Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of vanadium species on conventional carbon electrodes remains a major limitation to their performance.We investigated the deposition of carbon black,carbon nanotubes,and electrochemically exfoliated graphene(Exf-Gr)onto thermally-activated carbon paper(ACP)by spray coating to increase the electrode electrocatalytic activity.The modified electrodes were characterized using scanning electron microscopy,X-ray diffraction,Raman spectroscopy,X-ray photoelectron microscopy,and surface area analysis,while their electrochemical properties were evaluated by cyclic voltammetry,electrochemical impedance spectroscopy,and singlecell VRFB testing.Among the modified electrodes,Exf-Gr/ACP had the best performance,achieving a 2.9-fold reduction in charge transfer resistance compared to pristine ACP and delivering 2.5 times the discharge capacity in single-cell tests.This improvement is attributed to Exf-Gr’s high surface area,favorable catalytic activity,and excellent dispersion on the ACP substrate.Surface modification with electrochemically exfoliated graphene is a highly effective strategy for improving the electrode performance in VRFB systems,with significant implications for large-scale energy storage.
基金financial support from the National Natural Science Foundation of China(52473248,52203123,52125301,22279070 and U21A20170)the State Key Laboratory of Polymer Materials Engineering(Grant No:sklpme 2023-1-05 and sklpme 2024-2-04)+3 种基金the Ministry of Science and Technology of China(No.2019YFA0705703)the Sichuan Science and Technology Program(2023NSFSC0991 and 2025ZNSFSC1411)the Fundamental Research Funds for the Central Universitiespartially sponsored by the Double First-Class Construction Funds of Sichuan University.
文摘The development of shape-customizable and bulk flexible electrochemical devices through processing technologies as versatile as those used for plastics promises to revolutionize the future of battery technology.However,this pursuit has been fundamentally hindered by the absence of transformative battery materials capable of delivering the necessary electrochemical functions,robust interface adhesion,and,crucially,the suitable rheological properties required for on-demand shaping.In this work,we introduce a concept of a multifunctional plasticine electrode matrix(PEM)featuring nano-interpenetrating networks(nano-IPN)to address this challenge.Utilizing the nonflammable liquid-electrolyte hydration combined with conductive nanomaterials,we have realized a PEM in the form of a multifunctional nanocomposite that integrates ion and electron conduction,component binding,non-flammability,and plasticine-like moldability.With this PEM,we have successfully fabricated a variety of bulk-flexible electrodes with high mass loading of active material(AM)(>70 wt%)using industry-friendly extrusion and compression molding techniques.Moreover,these high AM-loading composite electrodes achieve an unparalleled bulk conformability and flexibility,remaining structurally intact even under severe mechanical stress.Ultimately,we have successfully produced shape-patternable and flexible batteries via extrusion molding.This study underscores the potential of the PEM to revolutionize battery microstructures,interfaces,manufacturing processes,and performance characteristics.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.2022M3H4A6A0103720142)the National Research Council of Science&Technology(NST)grant by the Korea government(MSIT)(No.GTL24011-000)+1 种基金the Technology Innovation Program(RS-2024-00404165)through the Korea Planning&Evaluation Institute of Industrial Technology(KEIT)funded by the Ministry of Trade,Industry&Energy(MOTIE,Korea)supported by the Samsung SDI Co.Ltd.and the Korea Institute of Science and Technology(KIST)institutional program(2E33942,2E3394B)。
文摘Strategies for achieving high-energy-density lithium-ion batteries include using high-capacity materials such as high-nickel NCM,increasing the active material content in the electrode by utilizing high-conductivity carbon nanotubes(CNT)conductive materials,and electrode thickening.However,these methods are still limited due to the limitation in the capacity of high-nickel NCM,aggregation of CNT conductive materials,and nonuniform material distribution of thick-film electrodes,which ultimately damage the mechanical and electrical integrity of the electrode,leading to a decrease in electrochemical performance.Here,we present an integrated binder-CNT composite dispersion solution to realize a high-solids-content(>77 wt%)slurry for high-mass-loading electrodes and to mitigate the migration of binder and conductive additives.Indeed,the approach reduces solvent usage by approximately 30%and ensures uniform conductive additive-binder domain distribution during electrode manufacturing,resulting in improved coating quality and adhesive strength for high-mass-loading electrodes(>12 mAh cm^(−2)).In terms of various electrode properties,the presented electrode showed low resistance and excellent electrochemical properties despite the low CNT contents of 0.6 wt%compared to the pristine-applied electrode with 0.85 wt%CNT contents.Moreover,our strategy enables faster drying,which increases the coating speed,thereby offering potential energy savings and supporting carbon neutrality in wet-based electrode manufacturing processes.
文摘Objective:To investigate the spatial gradient of intraoperative impedance across the cochlear electrode array in pediatric cochlear implant recipients and assess its potential as a physiological indicator for the electrode-neural interface.Methods:A prospective observational study involving 56 pediatric patients underwent cochlear implantation with Cochlear Nucleus devices.Intraoperative polarized impedance and electrically evoked compound action potential(ECAP)threshold were recorded across all 1232 electrodes using AutoNRT software.Eight electrodes with open-or short-circuit were excluded,leaving 1,224 for analysis.Impedance values were categorized by cochlear region(basal,middle,apical),and electrodes with elevated impedance(10-20 kΩ)were analyzed for regional distribution and clinical relevance.Data were analyzed for spatial patterns and correlation with the ECAP threshold profiles.Results:A consistent basal-to-apical increase in impedance was observed(7.7±1.9,9.2±1.4,10.8±1.5 kΩ;p<0.001).Impedance and ECAP threshold were weakly correlated(ρ=-0.20,p<0.001;β=-1.26,p<0.001),with a positive association in the apical region(ρ=0.12,p=0.048).Electrodes with higher impedance(1020 kΩ)were less likely to show elevated or absent TNRT(OR=0.175,p=0.02).The impedance gradient persisted across age groups and was significantly correlated with ECAP threshold patterns.Conclusion:Intraoperative impedance monitoring reveals a strong and physiologically consistent gradient,with higher values in apical electrodes.This gradient reflects anatomical and tissue interface variations,which may offer a valuable physiological indicator for intraoperative electrode positioning and neural interface integrity.
基金financially supported by research grants from Innovative Research Group Project of National Natural Science Foundation of China(52021004)the National Key Research and Development Program of China(2022YFB3803300)+1 种基金the National Natural Science Foundation of China(62474026,62205140,12204071)the China Postdoctoral Science Foundation(2022M710532)。
文摘Thermocells are garnering increasing attention as a promising thermoelectric technology for harvesting low-grade heat.However,their performance is often limited by the scarcity of high-performance redox couples that possess both high thermopower and rapid redox kinetics.This work addresses this challenge by leveraging our recently developed copper(Ⅰ/Ⅱ)(Cu^(+)/Cu^(2+))redox couple.We significantly enhance the performance of Cu-based liquid thermocells by integrating a thermosensitive crystallization process with etched carbon cloth electrodes,achieving synergistic improvements in thermodynamic and kinetic performance.The thermosensitive crystallization process establishes a persistent Cu^(2+)concentration gradient,boosting the thermopower from 1.47 to 2.93 mV K^(-1).Moreover,the etched carbon cloth electrodes provide a larger electroactive surface area and demonstrate a higher current density.Consequently,the optimized Cu^(+)/Cu^(2+)system achieved an exceptional normalized power density P_(max)(ΔT)^(-2)of 3.97 mW m^(-2)K^(-2).A thermocell module comprised of 20 cells directly power various electronic devices at a temperature difference of 40 K.This work successfully exhibits potential of Cu^(+)/Cu^(2+)redox couple in thermoelectric conversion and introduces a valuable redox couple for highperformance thermocells.
基金financially supported by the National Natural Science Foundation of China(No.22309067)the Open Project Program of the State Key Laboratory of Materials-Oriented Chemical Engineering,China(No.KL21-05)the Marine Equipment and Technology Institute,Jiangsu University of Science and Technology,China(No.XTCX202404)。
文摘This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.1)Mo_(0.05)O_(3-δ)(B S CNM_(0.05)),Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.05)Mo_(0.1)O_(3-δ)(BSCNM_(0.1)),and Ba_(0.6)Sr_(0.4)Co_(0.85)Mo_(0.15)O_(3-δ)(BSCM)—with Mo doping contents of 5mol%,10mol%,and15mol%,respectively,were successfully prepared using the sol-gel method.The effects of Mo doping on the crystal structure,conductivity,thermal expansion coefficient,oxygen reduction reaction(ORR)activity,and electrochemical performance were systematically evaluated using X-ray diffraction analysis,thermally induced characterization,electrochemical impedance spectroscopy,and single-cell performance tests.The results revealed that Mo doping could improve the conductivity of the materials,suppress their thermal expansion effects,and significantly improve the electrochemical performance.Surface chemical state analysis using X-ray photoelectron spectroscopy revealed that 5mol%Mo doping could facilitate a high adsorbed oxygen concentration leading to enhanced ORR activity in the materials.Density functional theory calculations confirmed that Mo doping promoted the ORR activity in the materials.At an operating temperature of 600℃,the BSCNM_(0.05)cathode material exhibited significantly enhanced electrochemical impedance characteristics,with a reduced area specific resistance of 0.048Ω·cm~2,which was lower than that of the undoped BSCN matrix material by 32.39%.At the same operating temperature,an anode-supported single cell using a BSCNM_(0.05)cathode achieved a peak power density of 1477 mW·cm^(-2),which was 30.71%,56.30%,and 171.50%higher than those of BSCN,BSCNM_(0.1),and B SCM,respectively.The improved ORR activity and electrochemical performance of BSCNM_(0.05)indicate that it can be used as a cathode material in low-temperature solid oxide fuel cells.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(No.NRF-2021M3H4A1A02048529)the Ministry of Trade,Industry and Energy(MOTIE)of the Korean government under grant No.RS-2022-00155854support from the DGIST Supercomputing and Big Data Center.
文摘To enhance the electrochemical performance of lithium-ion battery anodes with higher silicon content,it is essential to engineer their microstructure for better lithium-ion transport and mitigated volume change as well.Herein,we suggest an effective approach to control the micropore structure of silicon oxide(SiO_(x))/artificial graphite(AG)composite electrodes using a perforated current collector.The electrode features a unique pore structure,where alternating high-porosity domains and low-porosity domains markedly reduce overall electrode resistance,leading to a 20%improvement in rate capability at a 5C-rate discharge condition.Using microstructure-resolved modeling and simulations,we demonstrate that the patterned micropore structure enhances lithium-ion transport,mitigating the electrolyte concentration gradient of lithium-ion.Additionally,perforating current collector with a chemical etching process increases the number of hydrogen bonding sites and enlarges the interface with the SiO_(x)/AG composite electrode,significantly improving adhesion strength.This,in turn,suppresses mechanical degradation and leads to a 50%higher capacity retention.Thus,regularly arranged micropore structure enabled by the perforated current collector successfully improves both rate capability and cycle life in SiO_(x)/AG composite electrodes,providing valuable insights into electrode engineering.
基金funding from the National Natural Science Foundation of China (Award 91745203) supplemented by Central Universities’ Basic Research Funds.
文摘Ceramic cells promise ideal energy conversion and storage devices,making the development of efficient and robust air electrodes crucial for their application.In this study,a Ba_(0.4)Sr_(0.5)Cs_(0.1)Co_(0.7)Fe_(0.2)Nb_(0.1)O_(3−δ)(BSCCFN)air electrode,based on Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3−δ)(BSCF),is designed using a perovskite A-B-site ionic Lewis acid strength(ISA)polarization distribution strategy and is successfully applied in both oxygen-ion conducting solid oxide fuel cells(O-SOFCs)and proton-conducting reversible protonic ceramic cells(R-PCCs).When BSCCFN is used as the air electrode in O-SOFCs,a peak power density(PPD)of 1.45 W cm^(−2)is achieved at 650°C,whereas in R-PCCs,a PPD of 1.13 W cm^(−2)and a current density of−1.8 A cm^(−2)at 1.3 V are achieved at the same temperature and show stable reversibility over 100 h.Experimental measurements and theoretical calculations demonstrate that low-ISA Cs+doping accelerates the reaction kinetics of both oxygen ions and protons,while high-ISA Nb^(5+)doping enhances electrode stability.The synergistic effect of Cs^(+)and Nb^(5+)co-doping in the BSCCFN electrode lies in the ISA polarization distribution,which weakens the Co/Fe–O bond covalency,thereby promoting oxygen vacancy formation and facilitating the conduction of oxygen ions and protons.
基金funding support from Natural Science Foundation of Shanghai(Grant No.23ZR1443900)the National Natural Science Foundation of China(Grant Nos.22178309,22476131 and 22176127)。
文摘Economical,stable,and corrosion-resistant catalytic electrodes are still urgently needed for the oxygen evolution reaction(OER)in water and seawater.Herein,a mild electroless plating strategy is used to achieve large-scale preparation of the“integrated”phosphorus-based precatalyst(FeP-NiP)on nickel foam(NF),which is in situ reconstructed into a highly active and corrosion-resistant(Fe)NiOOH phase for OER.The interaction between phosphate anions(PO_(x)^(y-))and iron ions(Fe^(3+))tunes the electronic structure of the catalytic phase to further enhance OER kinetics.The integrated FeP-NiP@NF electrode exhibits low overpotentials for OER in alkaline water/seawater,requiring only 275/289,320/336,and 349/358 mV to reach 0.1,0.5,and 1.0 A cm^(−2),respectively.The in situ reconstructed PO_(x)^(y-)anion electrostatically repels Cl−in seawater electrolytes,allowing stable operation for over 7 days at 1.0 A cm^(−2) in extreme electrolytes(1.0 M KOH+seawater and 6.0 M KOH+seawater),demonstrating industrial-level stability.This study overcomes the complex synthesis limitations of P-based materials through innovative material design,opening new avenues for electrochemical energy conversion.
文摘In this study,artificial neural networks(ANNs)were implemented to determine design parameters for an impressed current cathodic protection(ICCP)prototype.An ASTM A36 steel plate was tested in 3.5%NaCl solution,seawater,and NS4 using electrochemical impedance spectroscopy(EIS)to monitor the evolution of the substrate surface,which affects the current required to reach the protection potential(Eprot).Experimental data were collected as training datasets and analyzed using statistical methods,including box plots and correlation matrices.Subsequently,ANNs were applied to predict the current demand at different exposure times,enabling the estimation of electrochemical parameters(limiting voltage values)that can be used to optimize a self-regulating ICCP system.The obtained electrochemical parameters were then used,through Particle Swarm Optimization(PSO),to fine-tune an ANN-based proportional-integral-derivative(PID)controller for the ICCP system.
基金jointly funded by the National Natural Science Foundation of China and Shenhua Group Corp.(Grant No.U1261103)the Natural Science Foundation of Shanxi Province of China(Grant No.201601D011023)
文摘An Ag2O/Ag electrode was prepared through the electrochemical oxidation of sterling silver.This electrode was used as a cathodic electron acceptor in a microbial fuel cell(MFC).The Ag2O/Ag electrode was characterized by scanning electron microscopy,X-ray powder diffraction and linear sweep voltammetry.The maximum voltage output of the MFC with the AgaO/Ag cathode was maintained at between 0.47 and 0.5 V in 100 cycles,indicating the good regenerative capacity of the Ag2O/Ag electrode.The overpotential loss for silver oxide was 0.021-0.006 V,and the maximum power output,open circuit potential and short circuit current of the MFC were 1.796 W m^-3,0.559 V and 9.3375 A m^-3,respectively.The energy required for electrochemical reoxidation ranged from 40%to 55%of the energy produced by the MFC.Results indicated that the AgeO/Ag electrode could be used as a cathodic electron acceptor in MFCs with excellent stability.
基金financially supported by the National Basic Research Program of China(No.2013CB632606-1)the National Natural Science Foundation of China(No.51204044)
文摘The cathodic behavior at tungsten electrode in Na3AlF6-Al2O3-LiF-based melt with various cryolite ratios was investigated by means of potentiodynamic cathodic polarization, potentiostatic electrolysis, chronopotentiometry, and open-circuit chronopotentiometry. The results show that the formation process of Al-W intermetallic compound is controlled by both diffusion and charge transfer when the cryolite ratio is below 2.5, and is completely controlled by diffusion when cryolite ratio is above2.5. The deposition process of metal aluminum is completely charge-transfer controlled. Sodium vapor releases along with the deposition of metal aluminum as crylite ratio increases, which leads to a great influence on current efficiency. When the cryolite ratio is lower than 2.0, the critical cathodic current density of deposited aluminum at tungsten electrode is about 150 mA·cm^（-2）,but the current density is above 200 mA·cm^（-2） under other experimental conditions. A higher cryolite ratio can cause a higher cathodic overvoltage. The relative content of Al layer is higher with the decrease of cryolite ratio, and Al layer easily strips into the molten salt when the cryolite ratio is higher than 2.5.
基金Project supported by the National Key Research and Development Program (2020YFC1909100)。
文摘The electrochemical formation of Sc-Cu alloy was investigated in LiF-CaF_(2) eutectic molten salt employing various electrochemical methods.Cyclic voltammetry and square wave voltammetry indicate that the reduction of scandium(Ⅲ) on the tungsten electrode is a one-step reduction process with three electrons transfer.And underpotential deposition of scandium on the copper electrode occurs owing to the depolarization effect,i.e.,forming Sc-Cu intermetallic compounds.The thermodynamic properties of the Sc-Cu intermetallic compounds ScCu_(4),ScCu_(2),and ScCu in the temperature range of 1153-1223 K were estimated by open-circuit chronopotentiometry.Moreover,the Sc-Cu alloys were prepared by potentiostatic electrolysis and characterized by optical microscope,X-ray diffraction,scanning electron microscopy,and energy dispersive spectroscopy.The results reveal that only Sc-Cu alloy composed of Cu-ScCu_(4) can be synthesized at low cathodic current density and above eutectic temperature.
基金supported by the National Natural Science Foundation of China(22378431,52004338,51622406,21673298)Hunan Provincial Natural Science Foundation(2023JJ40210,2022JJ20075)+3 种基金the Science and Technology Innovation Program of Hunan Province(2023RC3259)the Key R&D plan of Hunan Province(2024JK2096)Scientifc Research Fund of Hunan Provincial Education Department(23B0699)Central South University Innovation-Driven Research Programme(2023CXQD008).
文摘High-entropy materials represent a new category of high-performance materials,first proposed in 2004 and extensively investigated by researchers over the past two decades.The definition of high-entropy materials has continuously evolved.In the last ten years,the discovery of an increasing number of high-entropy materials has led to significant advancements in their utilization in energy storage,electrocatalysis,and related domains,accompanied by a rise in techniques for fabricating high-entropy electrode materials.Recently,the research emphasis has shifted from solely improving the performance of high-entropy materials toward exploring their reaction mechanisms and adopting cleaner preparation approaches.However,the current definition of high-entropy materials remains relatively vague,and the preparation method of high-entropy materials is based on the preparation method of single metal/low-or medium-entropy materials.It should be noted that not all methods applicable to single metal/low-or medium-entropy materials can be directly applied to high-entropy materials.In this review,the definition and development of high-entropy materials are briefly reviewed.Subsequently,the classification of high-entropy electrode materials is presented,followed by a discussion of their applications in energy storage and catalysis from the perspective of synthesis methods.Finally,an evaluation of the advantages and disadvantages of various synthesis methods in the production process of different high-entropy materials is provided,along with a proposal for potential future development directions for high-entropy materials.
文摘Manganese is an essential micronutrient for all organisms;however at high concentrations it has a toxic effect. Manganese toxicity is a serious constraint to crop cultivation since it is taken-up by plants and can easily be passed into the food chain again causing symptoms of Parkinson’s disease. A fully validated square-wave adsorptive cathodic stripping voltammetry method has been developed for determination of Mn (II) as a complex with 2-(5’-bromo-2’-pyridylazo) 5-diethylaminophenol in aqueous solutions using a carbon paste electrode (CPE) modified with montmorillonite-Na clay. The results showed that the modified CPE (90% (w/w) graphite powder and 10% (w/w) montmorillonite-Na clay) exhibited excellent electrochemical activity towards the investigated Mn (II) complex in acetate buffer of pH = 5.0. Factors affecting the performance of the modified carbon paste electrode and the sensitivity of the described square- wave stripping voltammetry method, including the electrode composition, concentration of ligand, pulse parameters and preconcentration conditions were examined. A detection limit (S/N = 3) of 0.015μg·L-1 (2.73 × 10-10 mol·L-1) Mn (II) was achieved when a preconcentration time of 240 s was applied. Insignificant interferences from various inorganic and organic species were estimated. The described square-wave adsorptive cathodic stripping voltammetry method coupled with the modified carbon paste electrode has been successfully applied to Mn (II) analysis in different water samples.
基金financially supported by the National Basic Research Program of China(No.2014CB643401)the National Natural Science Foundation of China(Nos.51134007 and 51404299)。
文摘Mechanism of cathodic process on nickel electrodeposition from ammonia-ammonium chloride solutions was studied by Tafel polarization curves,linear sweep voltammetry(LSV),cyclic voltammograms(CV)and chronopotentiometry(CE)technologies.In the electrolyte with 1.0 mol·L^(-1) NiCl_(2)·6H_(2)O,4.0 mol·L^(-1) NH_(3)·H_(2)O and2.5 mol·L^(-1) NH4Cl,nickel ion mainly complexed with ammonia and almost no free nickel ion could be found.It is confirmed that the dominant form of nickel ammonia complex ion in the system is Ni(NH_(3))_(4)^(2+)by measuring the equilibrium potential of the electrode at various concentrations of ammonia.The species of Ni(NH_(3))42+turns into Ni(NH_(3))_(2)^(2+)during pre-chemical reaction step before discharging reduction reaction.Then,Ni(NH_(3))_(2)^(2+)discharges at the cathodic interface to form metal nickel deposit directly.Nucleation process is involved during nickel electrodeposition according to CV results.The reduction reaction of Ni(NH_(3))_(2)^(2+)is irreversible which is controlled by diffusion step.Other processes are also accompanied during the electrodeposition process,except for the diffusioncontrolled process.
基金supported by National Natural Science Foundation of China(22279018)National Natural Science Foundation of China(22005055)Natural Science Foundation of Fujian Province(2022J01085).
文摘Solid oxide cells(SOCs)are emerging devices for efficient energy storage and conversion.However,during SOC operation,gaseous chromium(Cr)species released from Fe-Cr alloy interconnect can lead to Cr deposition and poisoning of air electrodes,causing substantial degradation in electrochemical performance and compromising the longterm stability of SOCs.This mini-review examines the mechanism of Cr deposition and poisoning in air electrodes under both fuel-cell and electrolysis modes.Furthermore,emphasis is placed on the recent advancements in strategies to mitigate Cr poisoning,offering insights into the rational design and development of active and Cr-tolerant air electrodes for SOCs.
基金financially supported by the Natural Science Foundation of Shandong(No.ZR2021MD002)the National Natural Science Foundation of China(Nos.42106051 and U2106206).
文摘The low photoelectric conversion efficiency of photoelectrode is an important factor that limits the application in photoelectrochemical cathodic protection(PECCP)field for marine anti-corrosion of metallic structures.In this work,a photoelectrode of TiO_(2)/CdZnS/ZnS triple-phase heterojunction was fabricated by loading the narrow-band CdZnS associated with the broad-band ZnS via hydrothermal and continuous ion layer adsorption methods,respectively.The composite of CdZnS enhances the photoelectric conversion ability of TiO_(2),while the ZnS composite can prevent the CdZnS from photo-corrosion and suppress the spillover of the photogenerated electrons.The three-phase heterostructure effectively improves the PECCP performance on 316 L stainless steel(SS)under simulated solar irradiation,especially in 3.5 wt%NaCl solution without the sacrificial agent.In addition,the prepared TiO_(2)/CdZnS/ZnS photoelectrode also performs anti-biofouling effect evidenced by the high removal efficiency of Pseudomonas aeruginosa(P.aeruginosa),which can be attributed to the oxidizability of photogenerated holes.The TiO_(2)/CdZnS/ZnS triple-phase heterojunction with desirable performance is a promising semiconductor material for the applications of PECCP and anti-biofouling.
基金supported by Fundamental Research Funds for the Central Universities(2023KYJD1008)the Science Research Projects of the Anhui Higher Education Institutions of China(2022AH051582).
文摘Reversible solid oxide cell(RSOC)is a new energy conversion device with significant applications,especially for power grid peaking shaving.However,the reversible conversion process of power generation/energy storage poses challenges for the performance and stability of air electrodes.In this work,a novel high-entropy perovskite oxide La_(0.2)Pr_(0.2)Gd_(0.2)Sm_(0.2)Sr_(0.2)Co_(0.8)Fe_(0.2)O_(3−δ)(HE-LSCF)is proposed and investigated as an air electrode in RSOC.The electrochemical behavior of HE-LSCF was studied as an air electrode in both fuel cell and electrolysis modes.The polarization impedance(Rp)of the HE-LSCF electrode is only 0.25Ω·cm^(2) at 800℃ in an air atmosphere.Notably,at an electrolytic voltage of 2 V and a temperature of 800℃,the current density reaches up to 1.68 A/cm^(2).The HE-LSCF air electrode exhibited excellent reversibility and stability,and its electrochemical performance remains stable after 100 h of reversible operation.With these advantages,HE-LSCF is shown to be an excellent air electrode for RSOC.
