Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic struct...Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.展开更多
Silicon-air batteries(SABs),a new type of semiconductor air battery,have a high energy density.However,some side reactions in SABs cause Si anodes to be covered by a passivation layer to prevent continuous discharge,a...Silicon-air batteries(SABs),a new type of semiconductor air battery,have a high energy density.However,some side reactions in SABs cause Si anodes to be covered by a passivation layer to prevent continuous discharge,and the anode utilization rate is low.In this work,reduced graphene oxide(RGO)fabricated via high-temperature annealing or L-ascorbic acid(L.AA)reduction was first used to obtain Si nanowires/RGO-1000(Si NWs/RGO-1000)and Si nanowires/RGO-L.AA(Si NWs/RGO-L.AA)composite anodes for SABs.It was found that RGO suppressed the passivation and self-corrosion reactions and that SABs using Si NWs/RGO-L.AA as the anode can discharge for more than 700 h,breaking the previous performance of SABs,and that the specific capacity was increased by 90.8%compared to bare Si.This work provides a new solution for the design of high specific capacity SABs with nanostructures and anode protective layers.展开更多
Carbon-based foams with a three-dimensional structure can serve as a lightweight template for the rational design and control-lable preparation of metal oxide/carbon-based composite microwave absorption materials.In t...Carbon-based foams with a three-dimensional structure can serve as a lightweight template for the rational design and control-lable preparation of metal oxide/carbon-based composite microwave absorption materials.In this study,a flake-like nickel cobaltate/re-duced graphene oxide/melamine-derived carbon foam(FNC/RGO/MDCF)was successfully fabricated through a combination of solvo-thermal treatment and high-temperature pyrolysis.Results indicated that RGO was evenly distributed in the MDCF skeleton,providing ef-fective support for the load growth of FNC on its surface.Sample S3,the FNC/RGO/MDCF composite prepared by solvothermal method for 16 h,exhibited a minimum reflection loss(RL_(min))of-66.44 dB at a thickness of 2.29 mm.When the thickness was reduced to 1.50 mm,the optimal effective absorption bandwidth was 3.84 GHz.Analysis of the absorption mechanism of FNC/RGO/MDCF revealed that its excellent absorption performance was primarily attributed to the combined effects of conduction loss,multiple reflection,scattering,in-terface polarization,and dipole polarization.展开更多
In pursuit of more efficient and stable electrochemical energy storage materials,composite materials consisting of metal oxides and graphene oxide have garnered significant attention due to their unique structures and...In pursuit of more efficient and stable electrochemical energy storage materials,composite materials consisting of metal oxides and graphene oxide have garnered significant attention due to their unique structures and exceptional properties.Graphene oxide(GO),a two-dimensional material with an extremely high specific surface area and excellent conductivity,offers new possibilities for enhancing the electrochemical performance of metal oxides.In this work,we synthesized met-al-organic framework(MOF)and GO composites by regulating the amount of GO,and successfully prepared composites of metal oxides supported by nitrogen-doped carbon frameworks and GO through a simple one-step calcination process.Based on the electrochemical tests,the optimal amount of GO was determined.This research will provide new insights into and directions for designing and synthesizing metal oxide and graphene oxide composite materials with an ideal electro-chemical performance.展开更多
Graphene oxide nanomaterials are increasingly used in various fields due to their superior properties.In order to study the influence of graphene oxide additives on the performance of modified asphalt,in this study,gr...Graphene oxide nanomaterials are increasingly used in various fields due to their superior properties.In order to study the influence of graphene oxide additives on the performance of modified asphalt,in this study,graphene oxide modified asphalt was prepared and characteristics was studied including the high deformation resistance performance and the self-healing property of modified asphalt.Functional groups and morphology of graphene oxide modified asphalt were described by Fourier transform infrared spectroscopy.The high deformation resistance performance and self-healing effect of asphalt samples were obtained through dynamic slear rheometer(DSR)test.Results shows that graphene oxide dispersions improve the performance of asphalt relatively well compared to graphene oxide powder.There is no chemical reaction between graphene oxide and asphalt,but physical connection.The addition of graphene oxide improved the high deformation resistance of modified asphalt and expedited the self-healing ability of asphalt under fatigue load.展开更多
The demand for high-energy-density sodium-ion batteries has driven research to increase the hard carbon(HC)plateau capacity(<0.1 V),but the plateau capacity-rate capability trade-off limits performance.We report a ...The demand for high-energy-density sodium-ion batteries has driven research to increase the hard carbon(HC)plateau capacity(<0.1 V),but the plateau capacity-rate capability trade-off limits performance.We report a way to regulate the closed pore structure and improve the rate capability of HC by the addition of graphene oxide using an emulsification process.In a non-emulsion system,graphene oxide not only shortens ion diffusion paths by inducing the formation of flakelike HC but also significantly improves the rate performance by serving as conductive bridges within the carbon matrix.The prepared graphene/phenolic resin carbon composite has reversible capacities of 362,340,319,274,119,86,69 and 48 mAh g^(−1)at current densities of 0.02,0.05,0.1,0.2,0.5,1,2 and 5 A g^(−1),respectively.When emulsification is introduced,the graphene oxide acts as a nano-confinement template,guiding the cross-linking of phenolic resin to form uniformly sized closed pores.This composite electrode material has the highest plateau capacity of 268 mAh g^(−1)at 20 mA g^(−1).展开更多
By enhancing surface interaction between metal oxide particles and carbon-based materials,it can effectively improve Faraday capacitance and conductivity,ultimately achieving high energy density with sufficient redox ...By enhancing surface interaction between metal oxide particles and carbon-based materials,it can effectively improve Faraday capacitance and conductivity,ultimately achieving high energy density with sufficient redox reactions in supercapacitors.Through a gentle biomineralization process and subsequent thermal reduction strategy,we successfully prepared the graphene oxide(GO)wrapping mixed-valence manganese oxides(MnO_(x))and S,P self-codoped carbon matrix porous composite(MnO_(x)@SPC@reduced graphene oxide(RGO)).During the biomineralization process of engineered Pseudomonas sp.(Ml)cells,GO nanosheets functioned as the'soil'to adsorb Mn^(2+)ion and uniformly disperse biogenic Mn oxides(BMO).After undergoing annealing,the MnO_(x) nanoparticles were evenly wrapped with graphene,resulting in the creation of the MnO_(x)@SPC@RGO3 composite.This composite possesses strong C—O—Mn bond interfaces,numerous electroactive sites,and a uniform pore structure.By optimizing the synergistic interaction between the highly conductive graphene and the remarkable surface capacitance of MnO_(x),the MnO_(x)@SPC@RGO3 electrode,with its intercalation Faraday reactions mechanism of■transformations,exhibits an outstanding specific capacity(448.3 F·g^(-1)at 0.5 A·g^(-1)),multiplying performance(340.5 F·g^(-1)at10 A·g^(-1)),and cycling stability(93.8%retention after 5000 cycles).Moreover,the asymmetric all-solidstate supercapacitors of MnO_(x)@SPC@RGO3//PC exhibit an exceptional energy density of 64.8 W·h·kg^(-1)and power density of 350 W·kg^(-1),as well as a long lifespan with capacitance retention of 92.5%after10000 cycles.In conclusion,the synthetic route utilizing biomineralization and thermal reduction exhibits significant potential for exploiting high-performance electrode materials in all-solid-state supercapacitor applications.展开更多
Graphene oxide (GO) reduced by Stachys lavandulifolia extract (SLE) was produced and characterised. The anti-corrosion behaviour of epoxy coatings containing GO and rGO nanosheets was investigated. FESEM-EDS, FT-IR, a...Graphene oxide (GO) reduced by Stachys lavandulifolia extract (SLE) was produced and characterised. The anti-corrosion behaviour of epoxy coatings containing GO and rGO nanosheets was investigated. FESEM-EDS, FT-IR, and Raman spectroscopy were used to examine the microstructure and chemical composition of the nanosheets and epoxy coatings. EIS experiment was used to explore the corrosion behaviour of the coatings. The O/C ratio for GO and rGO-SLE was found to be 2.5 and 4.5, indicating a decrease in the carbon content after the reduction of GO, confirming the adsorption of SLE onto the GO nanosheets. The successful reduction of GO in the presence of SLE particles was confirmed by disappearing the C=O peak and a significant decrease in the C-O-C bond intensity. The epoxy/rGO- SLE coatings exhibited the highest double-layer thickness and excellent corrosion resistance compared to neat epoxy and epoxy/GO coatings, emphasizing the significant role of rGO in enhancing the protective performance of epoxy coatings. The highest values for total charge transfer and film resistances and the inhibition efficiency were observed to be 6529 Ω·cm^(2) and 90%, respectively, for the epoxy/rGO-SLE coated steel plate. It was also found that the epoxy/0.15 wt.% rGO-SLE coating demonstrates the best corrosion resistance performance.展开更多
Paraphenylenediamine(PPDA)-grafted maleic anhydride(MAH)-modified graphene oxide(PGO)was synthesized through a dual modification process.Initially,MAH was employed to modify graphene oxide(GO)to enhance its reactive s...Paraphenylenediamine(PPDA)-grafted maleic anhydride(MAH)-modified graphene oxide(PGO)was synthesized through a dual modification process.Initially,MAH was employed to modify graphene oxide(GO)to enhance its reactive sites.Subsequently,PPDA was utilized for further modification of MAH-modified GO(MGO).Through a comprehensive analysis,the successful grafting of MAH and PPDA onto GO was confirmed.It was concurrently established that the optimal ratio of PPDA to MGO is 1:1.This approach yielded PGO characterized by outstanding dispersibility and barrier properties in epoxy resin(EP)coaings for Q235 steel.The corrosion resistance of EP coatings containing varying amounts of PGO was assessed using electrochemical workstation and salt spray testing.After immersing in a 3.5 wt.%NaCl solution for 300 h,the composite coating containing 0.1 wt.%PGO exhibited superior performance in terms of low-frequency impedance modulus,measuring at 1.1×10^(8)Ωcm^(2).The lowest corrosion current density was 2.32×10^(–10)A cm^(−2),and the self-corrosion voltage was−0.301 V.Additionally,polarization testing indicated that this coating also displayed the lowest corrosion rate,specifically 1.383×10^(–7)mm/a.展开更多
Green hydrogen is crucial for advancing renewable energy technologies and protecting the environment.This study introduces a controllable method for bimetallic nickel-cobalt phosphide on reduced graphene oxide on nick...Green hydrogen is crucial for advancing renewable energy technologies and protecting the environment.This study introduces a controllable method for bimetallic nickel-cobalt phosphide on reduced graphene oxide on nickel foam(NiCo_(3)P.C/NF).The material demonstrated low overpotentials of 58 and 180 mV at10 mA cm^(-2)for hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)in 1.0 M KOH.It achieved excellent electrochemical water-splitting performance with operating voltages of 1.54 and 2.6 V at 10 and 500 mA cm^(-2),respectively.The overall water-splitting performance of NiCo_(3).C/NF was extremely stable after 75 h of operation at 53 mA cm^(-2),retaining 98%efficiency,better than the sample Pt-C+RuO_(2),and outperforming previous reports.Density functional theory(DFT)results revealed a synergistic NiCo_(3)P.C interaction that yields nearly zero Gibbs free energy change(-0.100 eV)and upshift d-band center,the real active site at the Ni in HER,and the lowest overpotentials 0.26 V at the P active sites for OER.Furthermore,electronic charge distribution shows the maximum charge distribution between the NiCo_(3)P phase and graphene sheet heterojunction,enhancing the electrocatalyst conductivity.This combined approach offers an innovative strategy to design sustainable electrocatalysts for water s plitting.展开更多
Graphene oxide(GO)is a two-dimensional carbon material with a graphene-like structure and many oxygen-containing functional groups,and in recent years from research into the unique optical properties of GO,GO-based co...Graphene oxide(GO)is a two-dimensional carbon material with a graphene-like structure and many oxygen-containing functional groups,and in recent years from research into the unique optical properties of GO,GO-based composite materials formed by combining with other materials have shown improved overall performance.Reported here is an investigation of how doping with Ni,Fe,and Ag nanoparticles affects the linear and nonlinear optical properties of GO films.The morphology and structure of films of GO,GO with Ni nanoparticles,GO with Fe nanoparticles,and GO with Ag nanoparticles were studied by laser scanning confocal microscopy,SEM,energy dispersive spectroscopy,XRD,and Raman spectroscopy.UV-visible absorption spectra were used to study the optical absorption properties,and the optical band gaps of GO and the composites were calculated from those spectra via Tauc plots.The results show that the band gaps of GO films can be effectively regulated by metal nanoparticles,and so the properties of GO composites can be manipulated.The nonlinear optical properties of GO and GO-metal-nanoparticle composite films were studied by femtosecond laser Z-scanning.The results show that the femtosecond laser power can be tuned to the optical limiting behavior of GO.The strong synergistic coupling effect between metal nanoparticles and GO enhances the nonlinear absorption and nonlinear refraction of composite thin films.The nonlinear absorption coefficient of the composite thin films is improved significantly,and the optical limiting properties are excellent.GO-metal-nanoparticle composite materials have potential applications and advantages in improving optical absorption,band-gap control,and optical limiting.They can promote the expansion of GO composite materials in various practical applications and are candidates for good optical materials,opening the way to GO photonics.展开更多
Moisture can be utilized as a tremendous source of electricity by emerging moisture-electric generator (MEG). The directional moving of water molecules, which can be driven by gradient of functional groups and water e...Moisture can be utilized as a tremendous source of electricity by emerging moisture-electric generator (MEG). The directional moving of water molecules, which can be driven by gradient of functional groups and water evaporation, is vital for the electricity generation. Here, MEG composed of Graphene Oxide (GO-MEG) with gradient channels is constructed by one-step ice-templating technique, achieving a voltage of 0.48 V and a current of ~ 5.64 µA under humid condition. The gradient channels introduce Laplace pressure difference to the absorbed water droplets and electric potential between two side of the GO-MEG, facilitating the charge flow. Output voltage can be easily enhanced by increasing the structural gradient, reducing the channel size, incorporation of chemical gradient, or scaling up the number of GO-MEG units in series. This work not only provides insight for the working mechanism of GO-MEG with structural gradient, which can be applied to other functional materials, but also establishes a convenient and ecofriendly strategy to construct and finely tune the structural gradient in porous materials.展开更多
Nanodroplets of Gallium-Based Liquid Metal(LM)have applications in stretchable electronics,electrochemical sensors,energy storage,hyperthermia,and rapid polymerization.The gallium oxide layer around LMNDs prevents agg...Nanodroplets of Gallium-Based Liquid Metal(LM)have applications in stretchable electronics,electrochemical sensors,energy storage,hyperthermia,and rapid polymerization.The gallium oxide layer around LMNDs prevents aggregation.However,LM nanodroplets(LMNDs)are neither mechanically nor chemically stable.The ultrathin oxide layer ruptures under slight pressure,hindering their use in stretchable electronics.The shell also dissolves in slightly acidic/alkaline solutions,making them unstable for energy storage and electrochemical sensing.We demonstrate the synthesis of a dry LM powder with an LM core and a reduced graphene oxide shell.Graphene oxide provides excellent mechanical and chemical stability and permits electrical conductivity.Its porous structure does not block ion exchange between the LM droplets and the environment,allowing LMNDs to be used in energy storage and electrochemical sensing.The resulting EGaIn powders benefit from higher surface and long-term stability,addressing LMND limitations.We report using GO@EGaIn nanocomposite as an anode for alkali-ion batteries in a novel Ag-EGaIn cell with impressive energy storage capacity.The combination of liquid deformability of LMNDs,higher surface area in the nano form,and the stability of GO@EGaIn dry powder expands the applications of liquid metals in electronics and energy storage.展开更多
Optical polarizers,which allow the transmission of specific polarization states,are essential components in modern optical systems.Here,we experimentally demonstrate integrated photonic polarizers incorporating reduce...Optical polarizers,which allow the transmission of specific polarization states,are essential components in modern optical systems.Here,we experimentally demonstrate integrated photonic polarizers incorporating reduced graphene oxide(rGO)films.2D graphene oxide(GO)films are integrated onto silicon waveguides and microring resonators(MRRs)with precise control over their thicknesses and sizes,followed by GO reduction via two different methods including uniform thermal reduction and localized photothermal reduction.We measure devices with various lengths,thicknesses,and reduction degrees of GO films.The results show that the devices with rGO exhibit better performance than those with GO,achieving a polarization-dependent loss of~47 dB and a polarization extinction ratio of~16 dB for the hybrid waveguides and MRRs with rGO,respectively.By fitting the experimental results with theory,it is found that rGO exhibits more significant anisotropy in loss,with an anisotropy ratio over 4 times that of GO.In addition,rGO shows higher thermal stability and greater robustness to photothermal reduction than GO.These results highlight the strong potential of rGO films for implementing high-performance polarization selective devices in integrated photonic platforms.展开更多
Fast electron-hole recombination issues during titanium dioxide(TiO_(2))photocatalysis limit its application in preventing bacterial infection during bone defect repair.In this study,TiO_(2)@reduced graphene oxide(rGO...Fast electron-hole recombination issues during titanium dioxide(TiO_(2))photocatalysis limit its application in preventing bacterial infection during bone defect repair.In this study,TiO_(2)@reduced graphene oxide(rGO)composites were synthesized using a hydrothermal method in which rGO,which possesses very high electrical conductivity,promotes the separation of photoelectron-hole pairs of TiO_(2),thus improving the efficiency of photocatalytic production of reactive oxygen species(ROS).Subsequently,TiO_(2)@rGO composites were introduced into poly-L-lactic acid(PLLA)to prepare bone scaffolds with photocatalytic antibacterial function via selective laser sintering.The results showed that TiO_(2)grew on the surface of rGO and formed a covalent bond connection(Ti-O-C)with rGO.A decreased electrochemical impedance of TiO_(2)@rGO composites was observed,and the transient photocurrent intensity increased from 0.05 to 0.5μA/cm^(2).Analysis of electron spin resonance found that the photocatalytic products of TiO_(2)were·OH and·O^(2-),two kinds of ROS capable of killing bacteria via disrupting the structure of the bacterial membrane in vitro.Antibacterial experiments showed that the PLLA/TiO_(2)@rGO scaffolds had good antibacterial properties against Escherichia coli and Staphylococcus aureus.Finally,we report that these scaffolds exhibited both enhanced mechanical properties due to the addition of TiO_(2)@rGO as a reinforcement material and good biocompatibility during cell proliferation.展开更多
In recent times,there has been a surge of attention towards advanced high-performance materials for storing energy,specifically in supercapacitors.One encouraging method involves utilizing nanocomposites based on tran...In recent times,there has been a surge of attention towards advanced high-performance materials for storing energy,specifically in supercapacitors.One encouraging method involves utilizing nanocomposites based on transition metal oxides/graphene which have demonstrated significant potential for improving capacitance.The electrochemical properties of titanium oxide doped graphene in current research have been improved through the incorporation of rare earth metals.The hydrothermal technique was chosen for the fabrication of nanocomposites as electrode materials.X-ray diffraction(XRD),Raman spectroscopy,Fourier transform infrared spectroscopy(FT-IR),and scanning electron microscopy(SEM) approaches were employed for the characterization of nanocomposites.Ternary and quaternary nanocomposites with 2 wt% rare earth elements doped with titanium oxide and graphene were synthesized with various ratios of lanthanum and cerium as dopants.In 2 wt% La:Ce-TiO_(2)/rGO,lanthanum,and cerium were doped in 1:1,1:3,and 1:5 ratios.2 wt% La:Ce(1:5)-TiO_(2)/rGO among co-doped composites exhibits better capacitive performance as determined through cyclic voltammetry and galvanostatic charge-discharge.Among all the nanocomposites 422 F/g was the maximum depicted by 2 wt%La:Ce(1:5)-TiO_(2)/rGO at a scan rate of 10 mV/s(potential window from-0.4 to+0.6 V) and 1895 F/g at1 mV/s(potential window-0.6 to+0.6 V).specific capacitance was also determined via GCD,and a maximum capacitance of 486 F/g is depicted by 2 wt% La:Ce(1:5)-TiO_(2)/rGO.The same composites have also served as promising electrode materials in terms of columbic efficiency,power,and energy density.展开更多
Graphene Oxide(GO),nanoscale Zero-Valent Iron(nZVI)and GO-modified nZVI(GO-nZVI)composite materials were prepared by the Hummer and polyphenol reduction method,respectively,and Scanning Electron Microscope(SEM)and X-r...Graphene Oxide(GO),nanoscale Zero-Valent Iron(nZVI)and GO-modified nZVI(GO-nZVI)composite materials were prepared by the Hummer and polyphenol reduction method,respectively,and Scanning Electron Microscope(SEM)and X-ray Diffraction(XRD)were used to characterize the morphology and phase composition of these materials.A series of batch experiments were then conducted to inves-tigate the performance and influencing factors of GO-nZVI activating peroxydisulfate(SPS)for the degra-dation of 1,2,3-trichloropropane(TCP).Finally,an in-situ oxidation reaction zone was created by GO-nZVI-activated SPS in a one-dimensional simulated system to study the remediation of TCP contamination under different aquifer conditions.The results showed that the GO-nZVI composite exhibited a porous,fluffy structure,with spherical nZVI particles loaded onto the surface and folds of the GO sheets.Compared with unmodified nZVI particles,the GO-nZVI composite significantly enhanced the removal efficiency of TCP by activated SPS,achieving a removal rate of 67.2%within an hour-78.2%higher than that of the unmodi-fied system.The SPS dosage and the C/Fe ratio in GO-nZVI were found to significantly affect the degradation efficiency of TCP.The removal rate of TCP increased with higher SPS concentration,and a 10%carbon addition,yielded the best activation effect.The one-dimensional simulation results indicated that the removal rate of TCP ranged from 30.1%to 73.3%under different conditions.A larger medium particle size and higher concentrations of reactants(SPS and GO-nZVI)improved pollutant degradation efficiency,increasing TCP removal by 62.1%,23.8%,and 3.7%,respectively.In contrast,a higher groundwater flow velocity was not conducive to the removal of pollutants,with the TCP removal rate decreasing by approxi-mately 41.9%.展开更多
A widely employed energy technology,known as reverse electrodialysis(RED),holds the promise of delivering clean and renewable electricity from water.This technology involves the interaction of two or more bodies of wa...A widely employed energy technology,known as reverse electrodialysis(RED),holds the promise of delivering clean and renewable electricity from water.This technology involves the interaction of two or more bodies of water with varying concentrations of salt ions.The movement of these ions across a membrane generates electricity.However,the efficiency of these systems faces a challenge due to membrane performance degradation over time,often caused by channel blockages.One potential solution to enhance system efficiency is the use of nanofluidic membranes.These specialized membranes offer high ion exchange capacity,abundant ion sources,and customizable channels with varying sizes and properties.Graphene oxide(GO)-based membranes have emerged as particularly promising candidates in this regard,garnering significant attention in recent literature.This work provides a comprehensive overview of the literature surrounding GO membranes and their applications in RED systems.It also highlights recent advancements in the utilization of GO membranes within these systems.Finally,it explores the potential of these membranes to play a pivotal role in electricity generation within RED systems.展开更多
Rechargeable batteries are essential energy storage devices that power portable devices and electrical vehicles throughout the wo rld.In general,it is thought that the electrochemical performance of recha rgeable batt...Rechargeable batteries are essential energy storage devices that power portable devices and electrical vehicles throughout the wo rld.In general,it is thought that the electrochemical performance of recha rgeable batteries is mostly determined by the electrodes within them and that the electrolyte plays a relatively passive role.However,ion transport and storage can be greatly influenced by the electrolyte solution structure,specifically,ion solvation within the bulk and ion desolvation across the electrode/electrolyte interfaces.Herein,we studied the role of the electrolyte as an active component of electrochemical energy storage devices.We found that with an appropriate electrolyte formulation,ion storage in disordered carbonaceous anode materials can occur spontaneously without externally supplied electrical energy.Reduced graphene oxide(RGO)in an ether-based electrolyte demonstrates'spontaneous'ion storage behaviors of adsorbing and inserting the solvated ions utilizing facilitated permeability and wettability of RGO,which results in Coulombic efficiency of~145%due to additional charging capacity of~180 mAh g^(-1)during electrochemical processes.The unexpected spontaneous ion storage behavior was extensively investigated using a combination of electrochemical analyses and diagnostics,advanced characterizations,and computational simulation.We believe the spontaneous ion storage behavior offers a new way to further improve the energy efficiency of practical rechargeable batteries.展开更多
The demand for anisotropic aerogels with excellent comprehensive properties in cutting-edge fields such as aerospace is growing.Based on the above background,a novel heterocyclic para-aramid nanofiber/reduced graphene...The demand for anisotropic aerogels with excellent comprehensive properties in cutting-edge fields such as aerospace is growing.Based on the above background,a novel heterocyclic para-aramid nanofiber/reduced graphene oxide(HPAN/rGO)composite aerogel was prepared by combining electrospinning and unidirectional freeze-drying.The anisotropic HPAN/rGO composite aerogel exhibited a honeycomb morphology in the direction perpendicular to the growth of ice crystals,and a through-well structure of directed microchannels in the direction parallel to the temperature gradient.By varying the mass ratio of HPAN/rGO,a composite aerogel with an ultra-low density of 5.34-7.81 mg·cm^(-3) and an ultra-high porosity of 98%-99%was obtained.Benefiting from the anisotropic structure,the radial and axial thermal conductivities of HPAN/rGO-3 composite aerogel were 29.37 and 44.35 mW·m^(-1)·K^(-1),respectively.A combination of software simulation and experiments was used to analyze the effect of anisotropic structures on the thermal insulation properties of aerogels.Moreover,due to the intrinsic self-extinguishing properties of heterocyclic para-aramid and the protection of the graphene carbon layer,the composite aerogel also exhibits excellent flame retardancy properties,and its total heat release rate(THR)was only 5.8 kJ·g^(-1),which is far superior to many reported aerogels.Therefore,ultralight anisotropic HPAN/rGO composite aerogels with excellent high-temperature thermal insulation and flame retardancy properties have broad application prospects in complex environments such as aerospace.展开更多
基金supported by Korea Evaluation Institute of Industrial Technology(KEIT)grant funded by the Korea Government(MOTIE)(RS-2022-00154720,Technology Innovation Program Development of next-generation power semiconductor based on Si-on-SiC structure)the National Research Foundation of Korea(NRF)by the Korea government(RS-2023-NR076826)Global-Learning&Academic Research Institution for Master's·PhD students,and Postdocs(LAMP)Program of the National Research Foundation of Korea(NRF)by the Ministry of Education(No.RS-2024-00443714).
文摘Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.
基金supported by the National Natural Science Foundation of China(No.61904073)Spring City Plan-Special Program for Young Talents(No.K202005007)+4 种基金Yunnan Talents Support Plan for Yong Talents(No.XDYC-QNRC-20220482)Yunnan Local Colleges Applied Basic Research Projects(No.202101BA070001-138)Scientific Research Fund of Yunnan Education Department(No.2023Y0883)Frontier Research Team of Kunming University 2023Key Laboratory of Artificial Microstructures in Yunnan Higher Education。
文摘Silicon-air batteries(SABs),a new type of semiconductor air battery,have a high energy density.However,some side reactions in SABs cause Si anodes to be covered by a passivation layer to prevent continuous discharge,and the anode utilization rate is low.In this work,reduced graphene oxide(RGO)fabricated via high-temperature annealing or L-ascorbic acid(L.AA)reduction was first used to obtain Si nanowires/RGO-1000(Si NWs/RGO-1000)and Si nanowires/RGO-L.AA(Si NWs/RGO-L.AA)composite anodes for SABs.It was found that RGO suppressed the passivation and self-corrosion reactions and that SABs using Si NWs/RGO-L.AA as the anode can discharge for more than 700 h,breaking the previous performance of SABs,and that the specific capacity was increased by 90.8%compared to bare Si.This work provides a new solution for the design of high specific capacity SABs with nanostructures and anode protective layers.
基金support of the Key Science Research Project in Colleges and Universities of Anhui Province,China(No.2022AH050813)the Medical Special Cultivation Project of Anhui University of Science and Technology,China(No.YZ2023H2A002).
文摘Carbon-based foams with a three-dimensional structure can serve as a lightweight template for the rational design and control-lable preparation of metal oxide/carbon-based composite microwave absorption materials.In this study,a flake-like nickel cobaltate/re-duced graphene oxide/melamine-derived carbon foam(FNC/RGO/MDCF)was successfully fabricated through a combination of solvo-thermal treatment and high-temperature pyrolysis.Results indicated that RGO was evenly distributed in the MDCF skeleton,providing ef-fective support for the load growth of FNC on its surface.Sample S3,the FNC/RGO/MDCF composite prepared by solvothermal method for 16 h,exhibited a minimum reflection loss(RL_(min))of-66.44 dB at a thickness of 2.29 mm.When the thickness was reduced to 1.50 mm,the optimal effective absorption bandwidth was 3.84 GHz.Analysis of the absorption mechanism of FNC/RGO/MDCF revealed that its excellent absorption performance was primarily attributed to the combined effects of conduction loss,multiple reflection,scattering,in-terface polarization,and dipole polarization.
基金supported by the National Natural Science Foundation of China(51971157)Shenzhen Science and Technology Program(JCYJ20210324115412035,JCYJ202103-24123202008,JCYJ20210324122803009 and ZDS-YS20210813095534001)Guangdong Foundation for Basic and Applied Basic Research Program(2021A1515110880).
文摘In pursuit of more efficient and stable electrochemical energy storage materials,composite materials consisting of metal oxides and graphene oxide have garnered significant attention due to their unique structures and exceptional properties.Graphene oxide(GO),a two-dimensional material with an extremely high specific surface area and excellent conductivity,offers new possibilities for enhancing the electrochemical performance of metal oxides.In this work,we synthesized met-al-organic framework(MOF)and GO composites by regulating the amount of GO,and successfully prepared composites of metal oxides supported by nitrogen-doped carbon frameworks and GO through a simple one-step calcination process.Based on the electrochemical tests,the optimal amount of GO was determined.This research will provide new insights into and directions for designing and synthesizing metal oxide and graphene oxide composite materials with an ideal electro-chemical performance.
基金supported by Gansu Provincial Science and Technology Plan(23CXGA0195)Longnan Science and Technology Plan(2024CX03)。
文摘Graphene oxide nanomaterials are increasingly used in various fields due to their superior properties.In order to study the influence of graphene oxide additives on the performance of modified asphalt,in this study,graphene oxide modified asphalt was prepared and characteristics was studied including the high deformation resistance performance and the self-healing property of modified asphalt.Functional groups and morphology of graphene oxide modified asphalt were described by Fourier transform infrared spectroscopy.The high deformation resistance performance and self-healing effect of asphalt samples were obtained through dynamic slear rheometer(DSR)test.Results shows that graphene oxide dispersions improve the performance of asphalt relatively well compared to graphene oxide powder.There is no chemical reaction between graphene oxide and asphalt,but physical connection.The addition of graphene oxide improved the high deformation resistance of modified asphalt and expedited the self-healing ability of asphalt under fatigue load.
文摘The demand for high-energy-density sodium-ion batteries has driven research to increase the hard carbon(HC)plateau capacity(<0.1 V),but the plateau capacity-rate capability trade-off limits performance.We report a way to regulate the closed pore structure and improve the rate capability of HC by the addition of graphene oxide using an emulsification process.In a non-emulsion system,graphene oxide not only shortens ion diffusion paths by inducing the formation of flakelike HC but also significantly improves the rate performance by serving as conductive bridges within the carbon matrix.The prepared graphene/phenolic resin carbon composite has reversible capacities of 362,340,319,274,119,86,69 and 48 mAh g^(−1)at current densities of 0.02,0.05,0.1,0.2,0.5,1,2 and 5 A g^(−1),respectively.When emulsification is introduced,the graphene oxide acts as a nano-confinement template,guiding the cross-linking of phenolic resin to form uniformly sized closed pores.This composite electrode material has the highest plateau capacity of 268 mAh g^(−1)at 20 mA g^(−1).
基金supported by the National Natural Science Foundation of China(31900005)the Fund of Science and Technology Department of Henan Province(242102231001,242102320362,242102320157)+1 种基金the Fund of Program for Innovative Research Team(in Science and Technology)in University of Henan Province(23IRTSTHN009)Fund of Key Scientific Research Projects of Higher Education Institutions in Henan Province(22A150048)。
文摘By enhancing surface interaction between metal oxide particles and carbon-based materials,it can effectively improve Faraday capacitance and conductivity,ultimately achieving high energy density with sufficient redox reactions in supercapacitors.Through a gentle biomineralization process and subsequent thermal reduction strategy,we successfully prepared the graphene oxide(GO)wrapping mixed-valence manganese oxides(MnO_(x))and S,P self-codoped carbon matrix porous composite(MnO_(x)@SPC@reduced graphene oxide(RGO)).During the biomineralization process of engineered Pseudomonas sp.(Ml)cells,GO nanosheets functioned as the'soil'to adsorb Mn^(2+)ion and uniformly disperse biogenic Mn oxides(BMO).After undergoing annealing,the MnO_(x) nanoparticles were evenly wrapped with graphene,resulting in the creation of the MnO_(x)@SPC@RGO3 composite.This composite possesses strong C—O—Mn bond interfaces,numerous electroactive sites,and a uniform pore structure.By optimizing the synergistic interaction between the highly conductive graphene and the remarkable surface capacitance of MnO_(x),the MnO_(x)@SPC@RGO3 electrode,with its intercalation Faraday reactions mechanism of■transformations,exhibits an outstanding specific capacity(448.3 F·g^(-1)at 0.5 A·g^(-1)),multiplying performance(340.5 F·g^(-1)at10 A·g^(-1)),and cycling stability(93.8%retention after 5000 cycles).Moreover,the asymmetric all-solidstate supercapacitors of MnO_(x)@SPC@RGO3//PC exhibit an exceptional energy density of 64.8 W·h·kg^(-1)and power density of 350 W·kg^(-1),as well as a long lifespan with capacitance retention of 92.5%after10000 cycles.In conclusion,the synthetic route utilizing biomineralization and thermal reduction exhibits significant potential for exploiting high-performance electrode materials in all-solid-state supercapacitor applications.
文摘Graphene oxide (GO) reduced by Stachys lavandulifolia extract (SLE) was produced and characterised. The anti-corrosion behaviour of epoxy coatings containing GO and rGO nanosheets was investigated. FESEM-EDS, FT-IR, and Raman spectroscopy were used to examine the microstructure and chemical composition of the nanosheets and epoxy coatings. EIS experiment was used to explore the corrosion behaviour of the coatings. The O/C ratio for GO and rGO-SLE was found to be 2.5 and 4.5, indicating a decrease in the carbon content after the reduction of GO, confirming the adsorption of SLE onto the GO nanosheets. The successful reduction of GO in the presence of SLE particles was confirmed by disappearing the C=O peak and a significant decrease in the C-O-C bond intensity. The epoxy/rGO- SLE coatings exhibited the highest double-layer thickness and excellent corrosion resistance compared to neat epoxy and epoxy/GO coatings, emphasizing the significant role of rGO in enhancing the protective performance of epoxy coatings. The highest values for total charge transfer and film resistances and the inhibition efficiency were observed to be 6529 Ω·cm^(2) and 90%, respectively, for the epoxy/rGO-SLE coated steel plate. It was also found that the epoxy/0.15 wt.% rGO-SLE coating demonstrates the best corrosion resistance performance.
基金supports for this work are the Inner Mongolia Major Science and Technology Project(No.2020ZD0024)Natural Science Foundation of Inner Mongolia(No.2024LHMS05046)+5 种基金Local Science and Technology Development Project of the Central Government(Nos.2021ZY0006 and 2022ZY0011)2023 Inner Mongolia Autonomous Region Doctoral Research Innovation Project(No.B20231023Z)Inner Mongolia Autonomous Region key Research and Technological Achievements Transformation Plan Project(No.2023YFHH0063)Autonomous Region higher education Carbon peak carbon neutral research project(No.STZX202206)Basic Scientific Research Expenses Program of Universities directly under Inner Mongolia Autonomous Region(No.JY20220043)Graphite and Graphene New Materials Discipline Team of Inner Mongolia University of Technology(No.PY202066).
文摘Paraphenylenediamine(PPDA)-grafted maleic anhydride(MAH)-modified graphene oxide(PGO)was synthesized through a dual modification process.Initially,MAH was employed to modify graphene oxide(GO)to enhance its reactive sites.Subsequently,PPDA was utilized for further modification of MAH-modified GO(MGO).Through a comprehensive analysis,the successful grafting of MAH and PPDA onto GO was confirmed.It was concurrently established that the optimal ratio of PPDA to MGO is 1:1.This approach yielded PGO characterized by outstanding dispersibility and barrier properties in epoxy resin(EP)coaings for Q235 steel.The corrosion resistance of EP coatings containing varying amounts of PGO was assessed using electrochemical workstation and salt spray testing.After immersing in a 3.5 wt.%NaCl solution for 300 h,the composite coating containing 0.1 wt.%PGO exhibited superior performance in terms of low-frequency impedance modulus,measuring at 1.1×10^(8)Ωcm^(2).The lowest corrosion current density was 2.32×10^(–10)A cm^(−2),and the self-corrosion voltage was−0.301 V.Additionally,polarization testing indicated that this coating also displayed the lowest corrosion rate,specifically 1.383×10^(–7)mm/a.
基金supported by the Regional Leading Research Center Program(2019R1A5A8080326)funding from the Basic Science Research Program(2021R1F1A1048758,2022R1I1A1A01053248)+1 种基金the Regional Innovation Strategy(RIS)(2023RIS-008)through the National Research Foundation of Korea(NRF),funded by the Ministry of Educationsupported by the National Supercomputing Center,which provided supercomputing resources and technical support(TS-2024-RE-0039)。
文摘Green hydrogen is crucial for advancing renewable energy technologies and protecting the environment.This study introduces a controllable method for bimetallic nickel-cobalt phosphide on reduced graphene oxide on nickel foam(NiCo_(3)P.C/NF).The material demonstrated low overpotentials of 58 and 180 mV at10 mA cm^(-2)for hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)in 1.0 M KOH.It achieved excellent electrochemical water-splitting performance with operating voltages of 1.54 and 2.6 V at 10 and 500 mA cm^(-2),respectively.The overall water-splitting performance of NiCo_(3).C/NF was extremely stable after 75 h of operation at 53 mA cm^(-2),retaining 98%efficiency,better than the sample Pt-C+RuO_(2),and outperforming previous reports.Density functional theory(DFT)results revealed a synergistic NiCo_(3)P.C interaction that yields nearly zero Gibbs free energy change(-0.100 eV)and upshift d-band center,the real active site at the Ni in HER,and the lowest overpotentials 0.26 V at the P active sites for OER.Furthermore,electronic charge distribution shows the maximum charge distribution between the NiCo_(3)P phase and graphene sheet heterojunction,enhancing the electrocatalyst conductivity.This combined approach offers an innovative strategy to design sustainable electrocatalysts for water s plitting.
基金funded by the Henan Key Laboratory of Intelligent Manufacturing Equipment Integration for Superhard Materials(Grant No.JDKJ2022-01)the Key Lab of Modern Optical Technologies of Education Ministry of China,Soochow University。
文摘Graphene oxide(GO)is a two-dimensional carbon material with a graphene-like structure and many oxygen-containing functional groups,and in recent years from research into the unique optical properties of GO,GO-based composite materials formed by combining with other materials have shown improved overall performance.Reported here is an investigation of how doping with Ni,Fe,and Ag nanoparticles affects the linear and nonlinear optical properties of GO films.The morphology and structure of films of GO,GO with Ni nanoparticles,GO with Fe nanoparticles,and GO with Ag nanoparticles were studied by laser scanning confocal microscopy,SEM,energy dispersive spectroscopy,XRD,and Raman spectroscopy.UV-visible absorption spectra were used to study the optical absorption properties,and the optical band gaps of GO and the composites were calculated from those spectra via Tauc plots.The results show that the band gaps of GO films can be effectively regulated by metal nanoparticles,and so the properties of GO composites can be manipulated.The nonlinear optical properties of GO and GO-metal-nanoparticle composite films were studied by femtosecond laser Z-scanning.The results show that the femtosecond laser power can be tuned to the optical limiting behavior of GO.The strong synergistic coupling effect between metal nanoparticles and GO enhances the nonlinear absorption and nonlinear refraction of composite thin films.The nonlinear absorption coefficient of the composite thin films is improved significantly,and the optical limiting properties are excellent.GO-metal-nanoparticle composite materials have potential applications and advantages in improving optical absorption,band-gap control,and optical limiting.They can promote the expansion of GO composite materials in various practical applications and are candidates for good optical materials,opening the way to GO photonics.
基金supported by National Natural Science Foundation of China(52373119,52105296,62161160311)National Key R&D Program of China(2022YFB4701000)Open Fund of Hubei Key Laboratory of Electronic Manufacturing and Packaging Integration(Wuhan University)(EMPI2023020).
文摘Moisture can be utilized as a tremendous source of electricity by emerging moisture-electric generator (MEG). The directional moving of water molecules, which can be driven by gradient of functional groups and water evaporation, is vital for the electricity generation. Here, MEG composed of Graphene Oxide (GO-MEG) with gradient channels is constructed by one-step ice-templating technique, achieving a voltage of 0.48 V and a current of ~ 5.64 µA under humid condition. The gradient channels introduce Laplace pressure difference to the absorbed water droplets and electric potential between two side of the GO-MEG, facilitating the charge flow. Output voltage can be easily enhanced by increasing the structural gradient, reducing the channel size, incorporation of chemical gradient, or scaling up the number of GO-MEG units in series. This work not only provides insight for the working mechanism of GO-MEG with structural gradient, which can be applied to other functional materials, but also establishes a convenient and ecofriendly strategy to construct and finely tune the structural gradient in porous materials.
基金supported by the European Research Council,ERC project Liquid3D,grant number 101045072Access to the TAIL-UC facility,funded under the QREN-Mais Centro project ICT_2009_02_012_1890,is gratefully acknowledged+1 种基金the Foundation for Science and Technology(FCT)for support provided through the Concurso Estímulo ao Emprego Científico Individual,6th edition(reference 2023.08684.CEECIND)Support came as well from the projects Future Packaging,“Embalagem do Futuro”,Supported by the Portuguese Recovery and Resilience Plan(PRR)and the Next Generation EU European Funds,Green Agenda for Industrial Sector project 59.
文摘Nanodroplets of Gallium-Based Liquid Metal(LM)have applications in stretchable electronics,electrochemical sensors,energy storage,hyperthermia,and rapid polymerization.The gallium oxide layer around LMNDs prevents aggregation.However,LM nanodroplets(LMNDs)are neither mechanically nor chemically stable.The ultrathin oxide layer ruptures under slight pressure,hindering their use in stretchable electronics.The shell also dissolves in slightly acidic/alkaline solutions,making them unstable for energy storage and electrochemical sensing.We demonstrate the synthesis of a dry LM powder with an LM core and a reduced graphene oxide shell.Graphene oxide provides excellent mechanical and chemical stability and permits electrical conductivity.Its porous structure does not block ion exchange between the LM droplets and the environment,allowing LMNDs to be used in energy storage and electrochemical sensing.The resulting EGaIn powders benefit from higher surface and long-term stability,addressing LMND limitations.We report using GO@EGaIn nanocomposite as an anode for alkali-ion batteries in a novel Ag-EGaIn cell with impressive energy storage capacity.The combination of liquid deformability of LMNDs,higher surface area in the nano form,and the stability of GO@EGaIn dry powder expands the applications of liquid metals in electronics and energy storage.
基金supported by the Australian Research Council Centre of Excellence Project in Optical Microcombs for Breakthrough Science(No.CE230100006)the Australian Research Council Discovery Projects Programs(Nos.P190103186 and FT210100806)+4 种基金Linkage Program(Nos.LP210200345 and LP210100467)the Swinburne ECR-SUPRA program,the Industrial Transformation Training Centres scheme(No.IC180100005)the National Natural Science Foundation of China(No.12404375)the Beijing Natural Science Foundation(No.Z180007)the Innovation Program for Quantum Science and Technology(No.2021ZD0300703).
文摘Optical polarizers,which allow the transmission of specific polarization states,are essential components in modern optical systems.Here,we experimentally demonstrate integrated photonic polarizers incorporating reduced graphene oxide(rGO)films.2D graphene oxide(GO)films are integrated onto silicon waveguides and microring resonators(MRRs)with precise control over their thicknesses and sizes,followed by GO reduction via two different methods including uniform thermal reduction and localized photothermal reduction.We measure devices with various lengths,thicknesses,and reduction degrees of GO films.The results show that the devices with rGO exhibit better performance than those with GO,achieving a polarization-dependent loss of~47 dB and a polarization extinction ratio of~16 dB for the hybrid waveguides and MRRs with rGO,respectively.By fitting the experimental results with theory,it is found that rGO exhibits more significant anisotropy in loss,with an anisotropy ratio over 4 times that of GO.In addition,rGO shows higher thermal stability and greater robustness to photothermal reduction than GO.These results highlight the strong potential of rGO films for implementing high-performance polarization selective devices in integrated photonic platforms.
基金supported by the following funds:The National Natural Science Foundation of China(Nos.52275393,51935014,and 82072084)Jiangxi Provincial Natural Science Foundation of China(No.20224ACB204013)+2 种基金The Project of State Key Laboratory of Precision Manufacturing for Extreme Service Performancethe National Key Research and Development Program of China(No.2023YFB4605800)the Independent Exploration and Innovation Project of Central South University(No.1053320221707).
文摘Fast electron-hole recombination issues during titanium dioxide(TiO_(2))photocatalysis limit its application in preventing bacterial infection during bone defect repair.In this study,TiO_(2)@reduced graphene oxide(rGO)composites were synthesized using a hydrothermal method in which rGO,which possesses very high electrical conductivity,promotes the separation of photoelectron-hole pairs of TiO_(2),thus improving the efficiency of photocatalytic production of reactive oxygen species(ROS).Subsequently,TiO_(2)@rGO composites were introduced into poly-L-lactic acid(PLLA)to prepare bone scaffolds with photocatalytic antibacterial function via selective laser sintering.The results showed that TiO_(2)grew on the surface of rGO and formed a covalent bond connection(Ti-O-C)with rGO.A decreased electrochemical impedance of TiO_(2)@rGO composites was observed,and the transient photocurrent intensity increased from 0.05 to 0.5μA/cm^(2).Analysis of electron spin resonance found that the photocatalytic products of TiO_(2)were·OH and·O^(2-),two kinds of ROS capable of killing bacteria via disrupting the structure of the bacterial membrane in vitro.Antibacterial experiments showed that the PLLA/TiO_(2)@rGO scaffolds had good antibacterial properties against Escherichia coli and Staphylococcus aureus.Finally,we report that these scaffolds exhibited both enhanced mechanical properties due to the addition of TiO_(2)@rGO as a reinforcement material and good biocompatibility during cell proliferation.
文摘In recent times,there has been a surge of attention towards advanced high-performance materials for storing energy,specifically in supercapacitors.One encouraging method involves utilizing nanocomposites based on transition metal oxides/graphene which have demonstrated significant potential for improving capacitance.The electrochemical properties of titanium oxide doped graphene in current research have been improved through the incorporation of rare earth metals.The hydrothermal technique was chosen for the fabrication of nanocomposites as electrode materials.X-ray diffraction(XRD),Raman spectroscopy,Fourier transform infrared spectroscopy(FT-IR),and scanning electron microscopy(SEM) approaches were employed for the characterization of nanocomposites.Ternary and quaternary nanocomposites with 2 wt% rare earth elements doped with titanium oxide and graphene were synthesized with various ratios of lanthanum and cerium as dopants.In 2 wt% La:Ce-TiO_(2)/rGO,lanthanum,and cerium were doped in 1:1,1:3,and 1:5 ratios.2 wt% La:Ce(1:5)-TiO_(2)/rGO among co-doped composites exhibits better capacitive performance as determined through cyclic voltammetry and galvanostatic charge-discharge.Among all the nanocomposites 422 F/g was the maximum depicted by 2 wt%La:Ce(1:5)-TiO_(2)/rGO at a scan rate of 10 mV/s(potential window from-0.4 to+0.6 V) and 1895 F/g at1 mV/s(potential window-0.6 to+0.6 V).specific capacitance was also determined via GCD,and a maximum capacitance of 486 F/g is depicted by 2 wt% La:Ce(1:5)-TiO_(2)/rGO.The same composites have also served as promising electrode materials in terms of columbic efficiency,power,and energy density.
基金financially supported by the Basal Research Fund of Chinese Academy of Geological Sciences(NO.SK202318)the Natural Science Foundation of Xiamen,China(No.3502Z20227309)the Natural Science Foundation of Fujian Province of China(NO.2023J01227).
文摘Graphene Oxide(GO),nanoscale Zero-Valent Iron(nZVI)and GO-modified nZVI(GO-nZVI)composite materials were prepared by the Hummer and polyphenol reduction method,respectively,and Scanning Electron Microscope(SEM)and X-ray Diffraction(XRD)were used to characterize the morphology and phase composition of these materials.A series of batch experiments were then conducted to inves-tigate the performance and influencing factors of GO-nZVI activating peroxydisulfate(SPS)for the degra-dation of 1,2,3-trichloropropane(TCP).Finally,an in-situ oxidation reaction zone was created by GO-nZVI-activated SPS in a one-dimensional simulated system to study the remediation of TCP contamination under different aquifer conditions.The results showed that the GO-nZVI composite exhibited a porous,fluffy structure,with spherical nZVI particles loaded onto the surface and folds of the GO sheets.Compared with unmodified nZVI particles,the GO-nZVI composite significantly enhanced the removal efficiency of TCP by activated SPS,achieving a removal rate of 67.2%within an hour-78.2%higher than that of the unmodi-fied system.The SPS dosage and the C/Fe ratio in GO-nZVI were found to significantly affect the degradation efficiency of TCP.The removal rate of TCP increased with higher SPS concentration,and a 10%carbon addition,yielded the best activation effect.The one-dimensional simulation results indicated that the removal rate of TCP ranged from 30.1%to 73.3%under different conditions.A larger medium particle size and higher concentrations of reactants(SPS and GO-nZVI)improved pollutant degradation efficiency,increasing TCP removal by 62.1%,23.8%,and 3.7%,respectively.In contrast,a higher groundwater flow velocity was not conducive to the removal of pollutants,with the TCP removal rate decreasing by approxi-mately 41.9%.
基金Key Research and Development Program of Zhejiang Province,Grant/Award Number:2021C04019National Natural Science Foundation of China,Grant/Award Number:U20A20338Natural Science Foundation of Zhejiang Province,Grant/Award Number:LQ21H180012.
文摘A widely employed energy technology,known as reverse electrodialysis(RED),holds the promise of delivering clean and renewable electricity from water.This technology involves the interaction of two or more bodies of water with varying concentrations of salt ions.The movement of these ions across a membrane generates electricity.However,the efficiency of these systems faces a challenge due to membrane performance degradation over time,often caused by channel blockages.One potential solution to enhance system efficiency is the use of nanofluidic membranes.These specialized membranes offer high ion exchange capacity,abundant ion sources,and customizable channels with varying sizes and properties.Graphene oxide(GO)-based membranes have emerged as particularly promising candidates in this regard,garnering significant attention in recent literature.This work provides a comprehensive overview of the literature surrounding GO membranes and their applications in RED systems.It also highlights recent advancements in the utilization of GO membranes within these systems.Finally,it explores the potential of these membranes to play a pivotal role in electricity generation within RED systems.
基金supported by the faculty research fund of Sejong Universityfunding from the National Research Foundation of Korea(NRF)under grant number NRF-2022R1F1A1071444+2 种基金funding from NRF under grant numbers NRF-2022R1A2B5B03001781Funding provided by the Department of Energy Office of Energy EfficiencyRenewable Energy Vehicles Technology Office。
文摘Rechargeable batteries are essential energy storage devices that power portable devices and electrical vehicles throughout the wo rld.In general,it is thought that the electrochemical performance of recha rgeable batteries is mostly determined by the electrodes within them and that the electrolyte plays a relatively passive role.However,ion transport and storage can be greatly influenced by the electrolyte solution structure,specifically,ion solvation within the bulk and ion desolvation across the electrode/electrolyte interfaces.Herein,we studied the role of the electrolyte as an active component of electrochemical energy storage devices.We found that with an appropriate electrolyte formulation,ion storage in disordered carbonaceous anode materials can occur spontaneously without externally supplied electrical energy.Reduced graphene oxide(RGO)in an ether-based electrolyte demonstrates'spontaneous'ion storage behaviors of adsorbing and inserting the solvated ions utilizing facilitated permeability and wettability of RGO,which results in Coulombic efficiency of~145%due to additional charging capacity of~180 mAh g^(-1)during electrochemical processes.The unexpected spontaneous ion storage behavior was extensively investigated using a combination of electrochemical analyses and diagnostics,advanced characterizations,and computational simulation.We believe the spontaneous ion storage behavior offers a new way to further improve the energy efficiency of practical rechargeable batteries.
基金supported by the National Key R&D Program of China(No.2021YFB3700103).
文摘The demand for anisotropic aerogels with excellent comprehensive properties in cutting-edge fields such as aerospace is growing.Based on the above background,a novel heterocyclic para-aramid nanofiber/reduced graphene oxide(HPAN/rGO)composite aerogel was prepared by combining electrospinning and unidirectional freeze-drying.The anisotropic HPAN/rGO composite aerogel exhibited a honeycomb morphology in the direction perpendicular to the growth of ice crystals,and a through-well structure of directed microchannels in the direction parallel to the temperature gradient.By varying the mass ratio of HPAN/rGO,a composite aerogel with an ultra-low density of 5.34-7.81 mg·cm^(-3) and an ultra-high porosity of 98%-99%was obtained.Benefiting from the anisotropic structure,the radial and axial thermal conductivities of HPAN/rGO-3 composite aerogel were 29.37 and 44.35 mW·m^(-1)·K^(-1),respectively.A combination of software simulation and experiments was used to analyze the effect of anisotropic structures on the thermal insulation properties of aerogels.Moreover,due to the intrinsic self-extinguishing properties of heterocyclic para-aramid and the protection of the graphene carbon layer,the composite aerogel also exhibits excellent flame retardancy properties,and its total heat release rate(THR)was only 5.8 kJ·g^(-1),which is far superior to many reported aerogels.Therefore,ultralight anisotropic HPAN/rGO composite aerogels with excellent high-temperature thermal insulation and flame retardancy properties have broad application prospects in complex environments such as aerospace.
