We used hydrodynamic simulations and shock wave propagation theories to analyze the behavior of shock waves within Ti/Pt periodically modulated graded structures and their integration layers.The effects of the total n...We used hydrodynamic simulations and shock wave propagation theories to analyze the behavior of shock waves within Ti/Pt periodically modulated graded structures and their integration layers.The effects of the total number of periodic layers,the total thickness of graded materials and loading velocity on the integration layer thickness and behavior of pressure-strain rate were systematically investigated.The results reveal that,by adjusting the total number of periodically modulated layers,the total thickness of graded materials and loading velocity the pressure amplitudes of the reflected compressive and rarefaction waves at different interfaces of Ti/Pt periodically modulated graded materials can be precisely controlled.Furthermore,empirical structural design criteria for Ti/Pt periodically modulated graded materials are established.The thickness ratio variation between adjacent Ti/Pt layers in the periodic structure must exceed 0.32.After the collaborative design of the integration layer,Ti/Pt periodically modulated graded materials can achieve a controllable loading function with pressures ranging from 1.4 to 144 GPa and strain rates from 3.8×10^(4) to 1.7×10^(7) s^(–1).The outcomes of this research provide a theoretical and simulation basis for the optimized design of periodically modulated graded materials to be utilized in ramp compression experiments.展开更多
The intelligent vehicle corner module system,which integrates four-wheel independent drive,independent steering,independent braking and active suspension,can accurately and efficiently perform vehicle driving tasks an...The intelligent vehicle corner module system,which integrates four-wheel independent drive,independent steering,independent braking and active suspension,can accurately and efficiently perform vehicle driving tasks and is the best carrier of intelligent vehicles.Nevertheless,too many angle/torque control inputs make control difficult and non-real-time.In this paper,a hierarchical real-time motion control framework for corner module configuration intelligent electric vehicles is proposed.In the trajectory planning module,an improved driving risk field is designed to describe the surrounding environment’s driving risk.Combined with the kinematic vehicle-road model,model predictive control(MPC)method,spline curve method,the local reference trajectory of safety,comfort and smoothness is planned in real time.The optimal steering angle is determined using MPC method in path tracking module.In the motion control module,a feedforward-feedback controller assigns the optimal steering angle to the front/rear axles,and an angle allocation controller distributes the target angles of the front/rear axles to four steered wheels.Finally,the PreScan-Simulink-CarSim joint simulation environment is established for conducting the human-in-the-loop emergency obstacle avoidance experiment.It took only 0.005 s for the hierarchical motion control system to determine its average solution time.This proves the effectiveness of the hierarchical motion control system.展开更多
The performance of the designed digital electro-pneumatic cabin pressure control system for the cabin pressure schedule of transport aircraft is investigated.For the purpose of this study,an experimental setup consist...The performance of the designed digital electro-pneumatic cabin pressure control system for the cabin pressure schedule of transport aircraft is investigated.For the purpose of this study,an experimental setup consisting of a simulated hermetic cabin and altitude simulation chamber is configured for cabin pressure control system operation.A series of experimental tests are executed to evaluate the performance of the cabin pressure control system.The parameters of the PID controller are optimized.In the optimization process,the variation regularity of the rate of cabin pressure change under various conditions is considered.An approach to prioritize the control of the rate of change of cabin pressure based on the flight status model is proposed and verified experimentally.The experimental results indicate that the proposed approach can be adopted for the designed digital electro-pneumatic cabin pressure control system to obtain a better cabin pressure schedule and rate of cabin pressure change.展开更多
As a core part of subsea production systems,subsea control modules(SCMs)are costly,difficult,and expensive to install and inconvenient to use in underwater maintenance.Therefore,performance and function tests must be ...As a core part of subsea production systems,subsea control modules(SCMs)are costly,difficult,and expensive to install and inconvenient to use in underwater maintenance.Therefore,performance and function tests must be carried out before launching SCMs.This study developed a testing device and an SCM test by investigating SCMs and their underwater.The testing device includes four parts:a hydraulic station,an SCM test stand,a signal generating device,and an electronic test unit.First,the basic indices of the testing device were determined from the performance and working parameters of the SCM.Second,the design scheme of the testing device for the SCM was tentatively proposed,and each testing device was designed.Finally,a practical measurement of the SCM,in combination with the hydraulic station,SCM test stand,signal generator,electronic unit,and highpressure water tank,was carried out according to the test requirements.The measurement mainly involved equipment inspection before testing and an experimental test for the SCM.The validity and feasibility of the testing device and method were simultaneously verified through an association test.展开更多
An impeller is difficult to machine because of severe collision due to the complex shape,overlapping and twisted shape of the impeller blades.So,most computer aided manufacturing(CAM)software companies have developed ...An impeller is difficult to machine because of severe collision due to the complex shape,overlapping and twisted shape of the impeller blades.So,most computer aided manufacturing(CAM)software companies have developed CAM module for manufacturing impeller according to their CAM software.But these dedicated modules are difficult to use for inexperienced users.The purpose of this work is to develop a tool-path generation module for impellers.For this purpose,it is based on Visual Basic language and used CATIA graphical environment.The result of simulation for generated tool-path by the module is satisfactory.And it has slow processing speed compared to other commercial modules,but it is easy to use.展开更多
An extended-state-observer(ESO) based predictive control scheme is proposed for the autopilot of lunar landing.The slosh fuel masses exert forces and torques on the rigid body of lunar module(LM),such disturbances wil...An extended-state-observer(ESO) based predictive control scheme is proposed for the autopilot of lunar landing.The slosh fuel masses exert forces and torques on the rigid body of lunar module(LM),such disturbances will dramatically undermine the stability of autopilot system.The fuel sloshing dynamics and uncertainties due to the time-varying parameters are considered as a generalized disturbance which is estimated by an ESO from the measured attitude signals and the control input signals.Then a continuous-time predictive controller driven by the estimated states and disturbances is designed to obtain the virtual control input,which is allocated to the real control actuators according to a deadband logic.The 6-DOF simulation results reveal the effectiveness of the proposed method when dealing with the fuel sloshing dynamics and parameter perturbations.展开更多
The resiliency of a standalone microgrid is of considerable issue because the available regulation measures and capabilities are limited.Given this background,this paper presented a new mathematical model for a detail...The resiliency of a standalone microgrid is of considerable issue because the available regulation measures and capabilities are limited.Given this background,this paper presented a new mathematical model for a detailed photovoltaic(PV)module and the application of new control techniques for efficient energy extraction.The PV module employs a single-stage conversion method to integrate it with the utility grid.For extraction the maximum power from PV and integrate it to power grid,a three-phase voltage source converter is used.For obtaining the maximum power at a particular irradiance a maximum power point tracking(MPPT)scheme is used.The fuzzy logic control and adaptive network-based fuzzy inference system are proposed for direct current(DC)link voltage control.The proposed model and control scheme are validated through a comparison with the standard power-voltage and current-voltage charts for a PV module.Simulation results demonstrate that the system stability can be maintained with the power grid and in the island mode,in contrast with the MPPT.展开更多
In order to improve the electromagnetic compatibility of powertrain control module （PCM）, a system procedure of vehicular PCM electromagnetic alteration is presented in this paper. First of all, the box of the PCM i...In order to improve the electromagnetic compatibility of powertrain control module （PCM）, a system procedure of vehicular PCM electromagnetic alteration is presented in this paper. First of all, the box of the PCM is divided into different cabins to eliminate interferences between power supply circuit, analog circuit and digital circuit. Secondly, the working principle and electromagnetic （EM） characters of all the signals adopted by a typical PCM are analyzed. Then according to specific electromagnetic characters, different measures are adopted in corresponding signal process circuits or signal transfer cables, such as ground layout designing, power supply protecting, signal shielding and drive cable interference suppressing. Finally, further improvement may also needed regarding to practical electromagnetic compatibility test effects. The final test shows that, with all the measures mentioned above, the conducted emission of a PCM can be reduced by 20 dB; meanwhile, the radiated emission can be reduced by 30 dB comparing to the original system.展开更多
A modularized, network, reconfigurable architecture and design method of embedded control module is proposed. This control module uses a TMS320F2812 chip as the core, and intro- duces modularization, network, reconfig...A modularized, network, reconfigurable architecture and design method of embedded control module is proposed. This control module uses a TMS320F2812 chip as the core, and intro- duces modularization, network, reconfigurable theory to the design of control module to better meet the flexible and reconfigurable control need of assembly line. The design method of the control module is verified by constructing a control experiment based on controlling of precision x - y displace- ment platform through a CAN bus. Experimental results show that the controlling repeat position accuracy of precision x - y platform by control module is 0. 5 μm and the position error is less than 1μm which meet the needs of micro-adjustment pose of assembly line.展开更多
Controlling film morphology remains an inherent challenge limiting the performance of all-smallmolecule organic solar cells(ASM-OSCs),primarily due to excessive donor-acceptor compatibility restricting further improve...Controlling film morphology remains an inherent challenge limiting the performance of all-smallmolecule organic solar cells(ASM-OSCs),primarily due to excessive donor-acceptor compatibility restricting further improvements.Here,we introduce a novel strategy employing rhodanine-based film-forming kinetic modulators-specifically tailored for the high-performance donor BTR-Clincluding 3-methylrhodanine(C1),3-ethylrhodanine(C2),3-buty lr hod a nine(C4),and 3-hexylrhodanine(C6).We demonstrate that the C2 modulator uniquely optimizes morphology by extending film-formation time and fine-tuning donor-acceptor miscibility,leading to enhanced molecular ordering,uniform vertical distributio n,and optimal phase sepa ration.This synergistic morphological control significantly boosts BTR-Cl crystallinity and facilitates efficient three-dimensional charge transport networks.Consequently,C2-treated BTR-Cl:N3 ASM-OSCs achieve an outstanding power conversion efficiency(PCE)of 17.12%,ranking among the highest reported for this system.Crucially,this work introduces a novel"donor-modulator structural matching"strategy,providing a powerful new avenue for controlling film-forming kinetics to realize high-performance ASM-OSCs.展开更多
Sustainability and scalability remain critical hurdles for the commercialization of organic solar cells(OSCs).However,addressing both poses challenge.Herein,we introduce a simple yet effective strategy utilizing 3,5-d...Sustainability and scalability remain critical hurdles for the commercialization of organic solar cells(OSCs).However,addressing both poses challenge.Herein,we introduce a simple yet effective strategy utilizing 3,5-dichloropyridine(PDCC)as a solid additive to fine-tune the self-assembly behavior of Y-series non-fullerene acceptors(NFAs)to tackle the upscaling limitations in green-solvent-processed OSCs.PDCC predominantly interacts with Y-series NFAs,facilitating molecular crystallization and thereby driving the self-assembly of Y-series NFAs during film-forming dynamics,leading to more uniform active layers with improved molecular packing and reduced charge recombination.As a result,PDCC-driven self-assembly strategy enables high-performance OSCs with a power conversion efficiency(PCE)of 20.47%.When translated to sustainable fabrication,this strategy significantly boosts the PCE of large-area green-solvent-processed OSC modules(19.3 cm^(2))from 13.87%to 15.79%,ranking it among the best-performing green-solvent-processed large-area OSC modules(>18 cm^(2)).Beyond its impact on PCE enhancement,PDCC serves as a multifunctional additive to improve long-term stability and exhibits strong universality across multiple material systems.This work establishes a promising approach for advancing sustainable and scalable OSCs,paving the way for their commercialization.展开更多
Grifola frondosa(Maitake)is traditionally valued for its health benefits,with polysaccharides being key bioactive components.This paper investigates a specific subfraction,Fraction D(GFP-D),evaluating its clinical eff...Grifola frondosa(Maitake)is traditionally valued for its health benefits,with polysaccharides being key bioactive components.This paper investigates a specific subfraction,Fraction D(GFP-D),evaluating its clinical effects and mechanisms in immune enhancement,adjunctive anti-tumor activity,and regulation of glucose/lipid metabolism.Three clinical trials were conducted.In an immune study,120 healthy volunteers(CD4+T cell count 500–1000 cells/μL)received 150 mg/day GFP-D for 8 weeks,resulting in significant increases in CD4+T cells(from 632±95 to 812±108 cells/μL,28.5%increase,within the physiological activation range),CD4+/CD8+ratio,NK cell activity,IL-2,and IFN-γ(all P<0.001 vs.placebo).An anti-tumor study with 80 advanced cancer patients(stratified by age,tumor stage,and histotype)showed that adding 1000 mg/day GFP-D to chemotherapy improved objective response rate(52.5%vs.30.0%,P=0.036,95%CI:1.02–3.87),one-year progression-free survival(55.8%vs.33.3%,P=0.022),and preserved immune parameters versus chemotherapy alone.A metabolic study in 90 type 2 diabetes patients found that 400 mg/day GFP-D for 12 weeks significantly lowered fasting glucose,HbA1c,total cholesterol,triglycerides,and LDL-C,while raising HDL-C(from 1.0±0.2 to 1.2±0.2 mmol/L,20%increase,supported by increased AMPK phosphorylation).Mechanistically,immune enhancement involves macrophage/dendritic cell activation via Dectin-1/TLR4 receptors(confirmed by increased receptor expression and downstream signaling molecules),promoting cytokine-driven T/NK cell responses.Anti-tumor effects stem from immunomodulation,direct induction of cancer cell apoptosis(via mitochondrial/caspase pathways,verified by increased Bax/Bcl-2 ratio and caspase-3 activation),and angiogenesis inhibition by downregulating VEGF.Metabolic benefits are linked to AMPK pathway activation in liver/muscle(confirmed by increased p-AMPK/AMPK ratio),enhancing glucose uptake and inhibiting gluconeogenesis/lipogenesis,alongside modulation of gut microbiota(increased Bifidobacterium and Lactobacillus abundance).All trials reported no severe adverse events related to GFP-D;liver/kidney function parameters(ALT,AST,creatinine,urea nitrogen)remained within normal ranges throughout the intervention.Collectively,GFP-D emerges as a multi-functional bioactive agent with substantial therapeutic potential.展开更多
Vibrations or dither's are features of the PWM servo control system in their steady outputs. On the grounds of analyses and experiments of a PWM pneumatic servo control system, the paper puts forward four varietie...Vibrations or dither's are features of the PWM servo control system in their steady outputs. On the grounds of analyses and experiments of a PWM pneumatic servo control system, the paper puts forward four varieties of PWM modulation methods, and concludes on the relationship between dithers and the different methods, and then discusses the influence of friction to the dithers. Results from experiments regarding the dynamic and static responses on the given system support the theories presented.展开更多
A new skill of modulating driving signals of a synthetic jet with low frequency is introduced to enhance the control authority.Based on dynamic mesh technique,the effect of flow control over a NACA0015 airfoil with a ...A new skill of modulating driving signals of a synthetic jet with low frequency is introduced to enhance the control authority.Based on dynamic mesh technique,the effect of flow control over a NACA0015 airfoil with a Synthetic Jet Actuator(SJA)has been investigated.The SJA is located at x/c=10%,and two jet injection angles of 90°and 30°have been considered.Flow structures indicate that modulation with low frequency can reduce the dissipation rate of vortices after they shed off the surface.Thus aerodynamic performance of the airfoil could be improved.For the injection angle of 90°,modulation can increase the control authority of the SJA.Compared to the unmodulated case,increment of lift-to-drag ratio is up to 15%.The modulating frequency corresponding to the largest increment is F_(M)^(+)≈1.For the injection angle of 30°,improvement of aerodynamic forces positively relates to momentum coefficient of the SJA.Due to the decrease of effective momentum,modulation degrades the effect of flow control.The opposite responses to modulation are believed to have a relationship with the variation of primary control mechanism.When jet injection angle varies from 90°to 30°,the primary mechanism changes from the interaction of vortices and waves to the direct momentum addition.The skill of modulation of driving signals is very useful for applications of SJA.展开更多
In a quantum key distribution system, it is crucial to keep the extinction ratio of the coherent pulses stable. This means that the direct current bias point of the electro-optic modulator （EOM） used for generating ...In a quantum key distribution system, it is crucial to keep the extinction ratio of the coherent pulses stable. This means that the direct current bias point of the electro-optic modulator （EOM） used for generating coherent pulses must be locked. In this paper, an autobias control system based on a lock-in-amplifier for the EOM is introduced. Its drift information extracting theory and control method are analyzed comprehensively. The long term drift of the extinction ratio of the coherent pulses is measured by a single photon detector, which indicates that the autobias control system is effective for stabilizing the bias point of the EOM.展开更多
A four-level quantum dot (QD) nanostructure interacting with four fields (two weak near-infrared (NIR) pulses and two control fields) forms the well-known double-cascade configuration.We investigate the cross-phase mo...A four-level quantum dot (QD) nanostructure interacting with four fields (two weak near-infrared (NIR) pulses and two control fields) forms the well-known double-cascade configuration.We investigate the cross-phase modulation (XPM) between the two NIR pulses.The results show,in such a closed-loop scheme,that the XPM can be greatly enhanced,while the linear absorption and two-photon absorption (gain) can be efficiently depressed by tuning the relative phase among the applied fields.This protocol may have potential applications in NIR all-optical switch design and quantum information processing with the solid-state materials.展开更多
In this paper, we propose a novel, 3D, like cubic shape, modular self-reconfigurable (MSR) robot named M-Cubes. Its key mechanical components are analyzed in detail. By communicating with the neighboring modules, each...In this paper, we propose a novel, 3D, like cubic shape, modular self-reconfigurable (MSR) robot named M-Cubes. Its key mechanical components are analyzed in detail. By communicating with the neighboring modules, each unit employs its automatic lock device composed of a pin and a hole on each connection plane which can connect or disconnect with neighboring modules. The M-Cubes system consisting of many identical modules cooperates to change their connection, and then the whole structure transforms into arbitrary structure. Furthermore, we describe its locomotion control based on the driving function and the adjacency matrix which is effective for solving the computationally difficult problem and optimizing the system motion path during the self-reconfiguration process. Finally, a simulation experiment using java 3D technology, proved the new method for controlling modular robot is robust and useful.展开更多
The electrical modulation valve can provide proportional output valve element displacement,flow,or pressure according to a continuously changing input electrical signal.It is the core component of electro-hydraulic pr...The electrical modulation valve can provide proportional output valve element displacement,flow,or pressure according to a continuously changing input electrical signal.It is the core component of electro-hydraulic proportional control technology.To remove the influence of pressure difference changes on the output flow,the traditional scheme is to use a pressure compensation valve,which increases the difficulty of both manufacturing and maintaining the valve.To solve this problem,a method of digital and mechanical redundancy control flow is proposed.Pressure sensors are installed at the inlet and outlet of the valve,and the controller adjusts the displacement of the valve element according to the pressure difference between the valve ports to realize high-precision control of the flow.A pressure compensation valve is installed in front of the valve,and a three-way solenoid valve is used to control the working of the compensation valve.In the case of sensor failure,the valve is switched to the mechanical compensation differential pressure mode,to control the flow and to achieve redundancy control.The system security is thereby improved.The feasibility of this scheme is verified through simulation and tests.The results show that,both for digital compensation and mechanical compensation,the output flow can be kept constant when the pressure difference changes,and the system has good static and dynamic characteristics.The principle can be applied to the displacement-flow feedback type electrical modulation valve,and can realize accurate control of the flow of the pilot valve and,finally,accurate control of the flow in the main valve.展开更多
A hybrid control strategy has been designed and developed for the electro-hydraulic posi-tion servo control system with generalized Pulse code modulation(GPCM),which is suitable for the area where the work condition i...A hybrid control strategy has been designed and developed for the electro-hydraulic posi-tion servo control system with generalized Pulse code modulation(GPCM),which is suitable for the area where the work condition is poor and a large flow rate is required.It is difficult to control the GPCM system because the system is discrete.With consideration of the stability and speediness of the GPCM position servo control system,a control strategy is developed through the theoretical and ex-perimental analyses.The control strategy integrates the merits of Bang-Bang control,PID control and fuzzy control.With this hybrid control strategy,the electro hydraulic control system has good per-formances,and the servo control is carried out with GPCM through on-off valves.展开更多
基金Funded by the Guangdong Major Project of Basic and Applied Basic Research(No.2021B0301030001)the Foundation of National Key Laboratory of Shock Wave and Detonation Physics(No.JCKYS2022212004)。
文摘We used hydrodynamic simulations and shock wave propagation theories to analyze the behavior of shock waves within Ti/Pt periodically modulated graded structures and their integration layers.The effects of the total number of periodic layers,the total thickness of graded materials and loading velocity on the integration layer thickness and behavior of pressure-strain rate were systematically investigated.The results reveal that,by adjusting the total number of periodically modulated layers,the total thickness of graded materials and loading velocity the pressure amplitudes of the reflected compressive and rarefaction waves at different interfaces of Ti/Pt periodically modulated graded materials can be precisely controlled.Furthermore,empirical structural design criteria for Ti/Pt periodically modulated graded materials are established.The thickness ratio variation between adjacent Ti/Pt layers in the periodic structure must exceed 0.32.After the collaborative design of the integration layer,Ti/Pt periodically modulated graded materials can achieve a controllable loading function with pressures ranging from 1.4 to 144 GPa and strain rates from 3.8×10^(4) to 1.7×10^(7) s^(–1).The outcomes of this research provide a theoretical and simulation basis for the optimized design of periodically modulated graded materials to be utilized in ramp compression experiments.
基金Supported by National Natural Science Foundation of China(Grant No.52332013)。
文摘The intelligent vehicle corner module system,which integrates four-wheel independent drive,independent steering,independent braking and active suspension,can accurately and efficiently perform vehicle driving tasks and is the best carrier of intelligent vehicles.Nevertheless,too many angle/torque control inputs make control difficult and non-real-time.In this paper,a hierarchical real-time motion control framework for corner module configuration intelligent electric vehicles is proposed.In the trajectory planning module,an improved driving risk field is designed to describe the surrounding environment’s driving risk.Combined with the kinematic vehicle-road model,model predictive control(MPC)method,spline curve method,the local reference trajectory of safety,comfort and smoothness is planned in real time.The optimal steering angle is determined using MPC method in path tracking module.In the motion control module,a feedforward-feedback controller assigns the optimal steering angle to the front/rear axles,and an angle allocation controller distributes the target angles of the front/rear axles to four steered wheels.Finally,the PreScan-Simulink-CarSim joint simulation environment is established for conducting the human-in-the-loop emergency obstacle avoidance experiment.It took only 0.005 s for the hierarchical motion control system to determine its average solution time.This proves the effectiveness of the hierarchical motion control system.
文摘The performance of the designed digital electro-pneumatic cabin pressure control system for the cabin pressure schedule of transport aircraft is investigated.For the purpose of this study,an experimental setup consisting of a simulated hermetic cabin and altitude simulation chamber is configured for cabin pressure control system operation.A series of experimental tests are executed to evaluate the performance of the cabin pressure control system.The parameters of the PID controller are optimized.In the optimization process,the variation regularity of the rate of cabin pressure change under various conditions is considered.An approach to prioritize the control of the rate of change of cabin pressure based on the flight status model is proposed and verified experimentally.The experimental results indicate that the proposed approach can be adopted for the designed digital electro-pneumatic cabin pressure control system to obtain a better cabin pressure schedule and rate of cabin pressure change.
基金supported by the National Key R&D Program of China(2018YFC0310500)High-Tech Ship Research Projects sponsored by the Ministry of Industry and Information Technology(2018GXB01)Yantai City school land integration development project(2019XDRHXMPT29)research and development and test platform of underwater production system。
文摘As a core part of subsea production systems,subsea control modules(SCMs)are costly,difficult,and expensive to install and inconvenient to use in underwater maintenance.Therefore,performance and function tests must be carried out before launching SCMs.This study developed a testing device and an SCM test by investigating SCMs and their underwater.The testing device includes four parts:a hydraulic station,an SCM test stand,a signal generating device,and an electronic test unit.First,the basic indices of the testing device were determined from the performance and working parameters of the SCM.Second,the design scheme of the testing device for the SCM was tentatively proposed,and each testing device was designed.Finally,a practical measurement of the SCM,in combination with the hydraulic station,SCM test stand,signal generator,electronic unit,and highpressure water tank,was carried out according to the test requirements.The measurement mainly involved equipment inspection before testing and an experimental test for the SCM.The validity and feasibility of the testing device and method were simultaneously verified through an association test.
基金Project supported by the Second Stage of Brain Korea 21 Projects
文摘An impeller is difficult to machine because of severe collision due to the complex shape,overlapping and twisted shape of the impeller blades.So,most computer aided manufacturing(CAM)software companies have developed CAM module for manufacturing impeller according to their CAM software.But these dedicated modules are difficult to use for inexperienced users.The purpose of this work is to develop a tool-path generation module for impellers.For this purpose,it is based on Visual Basic language and used CATIA graphical environment.The result of simulation for generated tool-path by the module is satisfactory.And it has slow processing speed compared to other commercial modules,but it is easy to use.
基金Project(020301)supported by the Manned Spaceflight Advanced Research,ChinaProject(14JJ3024)supported by Hunan Natural Science Foundation,China
文摘An extended-state-observer(ESO) based predictive control scheme is proposed for the autopilot of lunar landing.The slosh fuel masses exert forces and torques on the rigid body of lunar module(LM),such disturbances will dramatically undermine the stability of autopilot system.The fuel sloshing dynamics and uncertainties due to the time-varying parameters are considered as a generalized disturbance which is estimated by an ESO from the measured attitude signals and the control input signals.Then a continuous-time predictive controller driven by the estimated states and disturbances is designed to obtain the virtual control input,which is allocated to the real control actuators according to a deadband logic.The 6-DOF simulation results reveal the effectiveness of the proposed method when dealing with the fuel sloshing dynamics and parameter perturbations.
基金supported by a project under the scheme entitled“Developing Policies&Adaptation Strategies to Climate Change in the Baltic Sea Region”(ASTRA),Project No.ASTRA6-4(2014-2020.4.01.16-0032).
文摘The resiliency of a standalone microgrid is of considerable issue because the available regulation measures and capabilities are limited.Given this background,this paper presented a new mathematical model for a detailed photovoltaic(PV)module and the application of new control techniques for efficient energy extraction.The PV module employs a single-stage conversion method to integrate it with the utility grid.For extraction the maximum power from PV and integrate it to power grid,a three-phase voltage source converter is used.For obtaining the maximum power at a particular irradiance a maximum power point tracking(MPPT)scheme is used.The fuzzy logic control and adaptive network-based fuzzy inference system are proposed for direct current(DC)link voltage control.The proposed model and control scheme are validated through a comparison with the standard power-voltage and current-voltage charts for a PV module.Simulation results demonstrate that the system stability can be maintained with the power grid and in the island mode,in contrast with the MPPT.
基金Sponsored by the Ministerial Level Foundation(10660060220)
文摘In order to improve the electromagnetic compatibility of powertrain control module （PCM）, a system procedure of vehicular PCM electromagnetic alteration is presented in this paper. First of all, the box of the PCM is divided into different cabins to eliminate interferences between power supply circuit, analog circuit and digital circuit. Secondly, the working principle and electromagnetic （EM） characters of all the signals adopted by a typical PCM are analyzed. Then according to specific electromagnetic characters, different measures are adopted in corresponding signal process circuits or signal transfer cables, such as ground layout designing, power supply protecting, signal shielding and drive cable interference suppressing. Finally, further improvement may also needed regarding to practical electromagnetic compatibility test effects. The final test shows that, with all the measures mentioned above, the conducted emission of a PCM can be reduced by 20 dB; meanwhile, the radiated emission can be reduced by 30 dB comparing to the original system.
基金Supported by National Defense Basic Scientific Research Project(A092000000)High Quality CNC Machine Tool and Basic Manufacturing Equipment Scientific Major Project(2012ZX04010-061)
文摘A modularized, network, reconfigurable architecture and design method of embedded control module is proposed. This control module uses a TMS320F2812 chip as the core, and intro- duces modularization, network, reconfigurable theory to the design of control module to better meet the flexible and reconfigurable control need of assembly line. The design method of the control module is verified by constructing a control experiment based on controlling of precision x - y displace- ment platform through a CAN bus. Experimental results show that the controlling repeat position accuracy of precision x - y platform by control module is 0. 5 μm and the position error is less than 1μm which meet the needs of micro-adjustment pose of assembly line.
基金supported by the National Natural Science Foundation of China(no.62304149 and no.52473318)the Zhejiang Province Natural Science Foundation of China(no.LY24E030008)+1 种基金the Key Research Program of Chinese Academy of Sciences(E4226101)supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIP)(2021R1A2C3004202)。
文摘Controlling film morphology remains an inherent challenge limiting the performance of all-smallmolecule organic solar cells(ASM-OSCs),primarily due to excessive donor-acceptor compatibility restricting further improvements.Here,we introduce a novel strategy employing rhodanine-based film-forming kinetic modulators-specifically tailored for the high-performance donor BTR-Clincluding 3-methylrhodanine(C1),3-ethylrhodanine(C2),3-buty lr hod a nine(C4),and 3-hexylrhodanine(C6).We demonstrate that the C2 modulator uniquely optimizes morphology by extending film-formation time and fine-tuning donor-acceptor miscibility,leading to enhanced molecular ordering,uniform vertical distributio n,and optimal phase sepa ration.This synergistic morphological control significantly boosts BTR-Cl crystallinity and facilitates efficient three-dimensional charge transport networks.Consequently,C2-treated BTR-Cl:N3 ASM-OSCs achieve an outstanding power conversion efficiency(PCE)of 17.12%,ranking among the highest reported for this system.Crucially,this work introduces a novel"donor-modulator structural matching"strategy,providing a powerful new avenue for controlling film-forming kinetics to realize high-performance ASM-OSCs.
基金the research grant from the Youth Fund of the National Natural Science Foundation of China(62305340)the financial support from the Hong Kong Research Grant Council via STEM Postdoctoral Fellowship(Project no.9446002)+6 种基金the Alexander von Humboldt Foundation and the support during his stay in Christoph J.Brabec’s group at Friedrich-Alexander-Universität Erlangen-Nürnberg and Helmholtz-Institute Erlangen-Nürnberg(HI ERN)the research grant from KAUST global fellowship postdocfinancial support from the Innovation and Technology Commission(Grant no.MHP/104/21)Shenzhen Science and Technology Innovation Commission(JCYJ20210324125612035,R-IND12303,and R-IND12304)the National Key Research and Development Program of China(no.2021YFA1500900)the National Natural Science Foundation of China(no.52071174)the support from the Hong Kong Jockey Club under the research work Hong Kong JC STEM Lab for Circular Bio-economy(Project No.2023-0078)。
文摘Sustainability and scalability remain critical hurdles for the commercialization of organic solar cells(OSCs).However,addressing both poses challenge.Herein,we introduce a simple yet effective strategy utilizing 3,5-dichloropyridine(PDCC)as a solid additive to fine-tune the self-assembly behavior of Y-series non-fullerene acceptors(NFAs)to tackle the upscaling limitations in green-solvent-processed OSCs.PDCC predominantly interacts with Y-series NFAs,facilitating molecular crystallization and thereby driving the self-assembly of Y-series NFAs during film-forming dynamics,leading to more uniform active layers with improved molecular packing and reduced charge recombination.As a result,PDCC-driven self-assembly strategy enables high-performance OSCs with a power conversion efficiency(PCE)of 20.47%.When translated to sustainable fabrication,this strategy significantly boosts the PCE of large-area green-solvent-processed OSC modules(19.3 cm^(2))from 13.87%to 15.79%,ranking it among the best-performing green-solvent-processed large-area OSC modules(>18 cm^(2)).Beyond its impact on PCE enhancement,PDCC serves as a multifunctional additive to improve long-term stability and exhibits strong universality across multiple material systems.This work establishes a promising approach for advancing sustainable and scalable OSCs,paving the way for their commercialization.
文摘Grifola frondosa(Maitake)is traditionally valued for its health benefits,with polysaccharides being key bioactive components.This paper investigates a specific subfraction,Fraction D(GFP-D),evaluating its clinical effects and mechanisms in immune enhancement,adjunctive anti-tumor activity,and regulation of glucose/lipid metabolism.Three clinical trials were conducted.In an immune study,120 healthy volunteers(CD4+T cell count 500–1000 cells/μL)received 150 mg/day GFP-D for 8 weeks,resulting in significant increases in CD4+T cells(from 632±95 to 812±108 cells/μL,28.5%increase,within the physiological activation range),CD4+/CD8+ratio,NK cell activity,IL-2,and IFN-γ(all P<0.001 vs.placebo).An anti-tumor study with 80 advanced cancer patients(stratified by age,tumor stage,and histotype)showed that adding 1000 mg/day GFP-D to chemotherapy improved objective response rate(52.5%vs.30.0%,P=0.036,95%CI:1.02–3.87),one-year progression-free survival(55.8%vs.33.3%,P=0.022),and preserved immune parameters versus chemotherapy alone.A metabolic study in 90 type 2 diabetes patients found that 400 mg/day GFP-D for 12 weeks significantly lowered fasting glucose,HbA1c,total cholesterol,triglycerides,and LDL-C,while raising HDL-C(from 1.0±0.2 to 1.2±0.2 mmol/L,20%increase,supported by increased AMPK phosphorylation).Mechanistically,immune enhancement involves macrophage/dendritic cell activation via Dectin-1/TLR4 receptors(confirmed by increased receptor expression and downstream signaling molecules),promoting cytokine-driven T/NK cell responses.Anti-tumor effects stem from immunomodulation,direct induction of cancer cell apoptosis(via mitochondrial/caspase pathways,verified by increased Bax/Bcl-2 ratio and caspase-3 activation),and angiogenesis inhibition by downregulating VEGF.Metabolic benefits are linked to AMPK pathway activation in liver/muscle(confirmed by increased p-AMPK/AMPK ratio),enhancing glucose uptake and inhibiting gluconeogenesis/lipogenesis,alongside modulation of gut microbiota(increased Bifidobacterium and Lactobacillus abundance).All trials reported no severe adverse events related to GFP-D;liver/kidney function parameters(ALT,AST,creatinine,urea nitrogen)remained within normal ranges throughout the intervention.Collectively,GFP-D emerges as a multi-functional bioactive agent with substantial therapeutic potential.
文摘Vibrations or dither's are features of the PWM servo control system in their steady outputs. On the grounds of analyses and experiments of a PWM pneumatic servo control system, the paper puts forward four varieties of PWM modulation methods, and concludes on the relationship between dithers and the different methods, and then discusses the influence of friction to the dithers. Results from experiments regarding the dynamic and static responses on the given system support the theories presented.
基金supported by the National Natural Science Foundation of China(Nos.:11872374 and 11602299)。
文摘A new skill of modulating driving signals of a synthetic jet with low frequency is introduced to enhance the control authority.Based on dynamic mesh technique,the effect of flow control over a NACA0015 airfoil with a Synthetic Jet Actuator(SJA)has been investigated.The SJA is located at x/c=10%,and two jet injection angles of 90°and 30°have been considered.Flow structures indicate that modulation with low frequency can reduce the dissipation rate of vortices after they shed off the surface.Thus aerodynamic performance of the airfoil could be improved.For the injection angle of 90°,modulation can increase the control authority of the SJA.Compared to the unmodulated case,increment of lift-to-drag ratio is up to 15%.The modulating frequency corresponding to the largest increment is F_(M)^(+)≈1.For the injection angle of 30°,improvement of aerodynamic forces positively relates to momentum coefficient of the SJA.Due to the decrease of effective momentum,modulation degrades the effect of flow control.The opposite responses to modulation are believed to have a relationship with the variation of primary control mechanism.When jet injection angle varies from 90°to 30°,the primary mechanism changes from the interaction of vortices and waves to the direct momentum addition.The skill of modulation of driving signals is very useful for applications of SJA.
基金Project supported by the National Natural Science Foundation of China(Grant No.61108039)the Major Research Plan of the National Natural Science Foundation of China(Grant No.91121023)the Scientific Research Foundation of Graduate School of South China Normal University(Grant No.2012kyjj224)
文摘In a quantum key distribution system, it is crucial to keep the extinction ratio of the coherent pulses stable. This means that the direct current bias point of the electro-optic modulator （EOM） used for generating coherent pulses must be locked. In this paper, an autobias control system based on a lock-in-amplifier for the EOM is introduced. Its drift information extracting theory and control method are analyzed comprehensively. The long term drift of the extinction ratio of the coherent pulses is measured by a single photon detector, which indicates that the autobias control system is effective for stabilizing the bias point of the EOM.
基金Supported in part by the National Natural Science Foundation of China Grant Nos.10975054,60925021,11104210,and 61108016the Department of Education of China Grant No.200804870051
文摘A four-level quantum dot (QD) nanostructure interacting with four fields (two weak near-infrared (NIR) pulses and two control fields) forms the well-known double-cascade configuration.We investigate the cross-phase modulation (XPM) between the two NIR pulses.The results show,in such a closed-loop scheme,that the XPM can be greatly enhanced,while the linear absorption and two-photon absorption (gain) can be efficiently depressed by tuning the relative phase among the applied fields.This protocol may have potential applications in NIR all-optical switch design and quantum information processing with the solid-state materials.
基金Project (No. 50305021) supported by the National Natural ScienceFoundation of China
文摘In this paper, we propose a novel, 3D, like cubic shape, modular self-reconfigurable (MSR) robot named M-Cubes. Its key mechanical components are analyzed in detail. By communicating with the neighboring modules, each unit employs its automatic lock device composed of a pin and a hole on each connection plane which can connect or disconnect with neighboring modules. The M-Cubes system consisting of many identical modules cooperates to change their connection, and then the whole structure transforms into arbitrary structure. Furthermore, we describe its locomotion control based on the driving function and the adjacency matrix which is effective for solving the computationally difficult problem and optimizing the system motion path during the self-reconfiguration process. Finally, a simulation experiment using java 3D technology, proved the new method for controlling modular robot is robust and useful.
基金supported by the National Key Research and Development Program of China(No.2019YFB2004502)the National Natural Science Foundation of China(No.51975397)the Key Research and Development Program of Shanxi Province(No.201903D111007),China。
文摘The electrical modulation valve can provide proportional output valve element displacement,flow,or pressure according to a continuously changing input electrical signal.It is the core component of electro-hydraulic proportional control technology.To remove the influence of pressure difference changes on the output flow,the traditional scheme is to use a pressure compensation valve,which increases the difficulty of both manufacturing and maintaining the valve.To solve this problem,a method of digital and mechanical redundancy control flow is proposed.Pressure sensors are installed at the inlet and outlet of the valve,and the controller adjusts the displacement of the valve element according to the pressure difference between the valve ports to realize high-precision control of the flow.A pressure compensation valve is installed in front of the valve,and a three-way solenoid valve is used to control the working of the compensation valve.In the case of sensor failure,the valve is switched to the mechanical compensation differential pressure mode,to control the flow and to achieve redundancy control.The system security is thereby improved.The feasibility of this scheme is verified through simulation and tests.The results show that,both for digital compensation and mechanical compensation,the output flow can be kept constant when the pressure difference changes,and the system has good static and dynamic characteristics.The principle can be applied to the displacement-flow feedback type electrical modulation valve,and can realize accurate control of the flow of the pilot valve and,finally,accurate control of the flow in the main valve.
文摘A hybrid control strategy has been designed and developed for the electro-hydraulic posi-tion servo control system with generalized Pulse code modulation(GPCM),which is suitable for the area where the work condition is poor and a large flow rate is required.It is difficult to control the GPCM system because the system is discrete.With consideration of the stability and speediness of the GPCM position servo control system,a control strategy is developed through the theoretical and ex-perimental analyses.The control strategy integrates the merits of Bang-Bang control,PID control and fuzzy control.With this hybrid control strategy,the electro hydraulic control system has good per-formances,and the servo control is carried out with GPCM through on-off valves.
