During the propagation of high-power lasers within internal channels,the laser beam heats the propagation medium,causing the thermal blooming effect that degrades the beam quality at the output.The intricate configura...During the propagation of high-power lasers within internal channels,the laser beam heats the propagation medium,causing the thermal blooming effect that degrades the beam quality at the output.The intricate configuration of the optical path within the internal channel necessitates complex and time-consuming efforts to assess the impact of thermal blooming effect on the optical path.To meet the engineering need for rapid evaluation of thermal blooming effect in optical paths,this study proposed a rapid simulation method for the thermal blooming effect in internal optical paths based on the finite element method.This method discretized the fluid region into infinitesimal elements and employed finite element method for flow field analysis.A simplified analytical model of the flow field region in complex internal channels was established,and regions with similar thermal blooming effect were divided within this model.Based on the calculated optical path differences within these regions,numerical simulations of phase distortion caused by thermal blooming were conducted.The calculated result were compared with those obtained using the existing methods.The findings reveal that for complex optical paths,the discrepancy between the two approaches is less than 3.6%,with similar phase distortion patterns observed.For L-type units,this method and the existing methods identify the same primary factors influencing aberrations and exhibit consistent trends in their variation.This method was used to analyze the impact of thermal blooming effect in a straight channel under different gravity directions.The results show that phase distortion varies with changes in the direction of gravity,and the magnitude of the phase difference is strongly correlated with the component of gravity perpendicular to the optical axis.Compared to the existing methods,this approach offers greater flexibility,obviates the need for complex custom analysis programming.The analytical results of this method enable a rapid assessment of the thermal blooming effect in optical paths within the internal channel.This is especially useful during the engineering design.These results also provide crucial references for developing strategies to suppress thermal blooming effect.展开更多
High-performance Ti_(3)C_(2)T_(x)fibers have garnered significant potential for smart fibers enabled fabrics.Nonetheless,a major challenge hindering their widespread use is the lack of strong interlayer interactions b...High-performance Ti_(3)C_(2)T_(x)fibers have garnered significant potential for smart fibers enabled fabrics.Nonetheless,a major challenge hindering their widespread use is the lack of strong interlayer interactions between Ti_(3)C_(2)T_(x)nanosheets within fibers,which restricts their properties.Herein,a versatile strategy is proposed to construct wet-spun Ti_(3)C_(2)T_(x)fibers,in which trace amounts of borate form strong interlayer crosslinking between Ti_(3)C_(2)T_(x)nanosheets to significantly enhance interactions as supported by density functional theory calculations,thereby reducing interlayer spacing,diminishing microscopic voids and promoting orientation of the nanosheets.The resultant Ti_(3)C_(2)T_(x)fibers exhibit exceptional electrical conductivity of 7781 S cm^(-1)and mechanical properties,including tensile strength of 188.72 MPa and Young's modulus of 52.42 GPa.Notably,employing equilibrium molecular dynamics simulations,finite element analysis,and cross-wire geometry method,it is revealed that such crosslinking also effectively lowers interfacial thermal resistance and ultimately elevates thermal conductivity of Ti_(3)C_(2)T_(x)fibers to 13 W m^(-1)K^(-1),marking the first systematic study on thermal conductivity of Ti_(3)C_(2)T_(x)fibers.The simple and efficient interlayer crosslinking enhancement strategy not only enables the construction of thermal conductivity Ti_(3)C_(2)T_(x)fibers with high electrical conductivity for smart textiles,but also offers a scalable approach for assembling other nanomaterials into multifunctional fibers.展开更多
Internal thermally coupled distillation columns (ITCDIC) are the frontier of distillation energy saving research. In this paper, a novel energy saving model of ideal ITCDIC and a simulation algorithm are presented,upo...Internal thermally coupled distillation columns (ITCDIC) are the frontier of distillation energy saving research. In this paper, a novel energy saving model of ideal ITCDIC and a simulation algorithm are presented,upon which a series of comparative studies on energy savings with conventional distillation columns are carried out. Furthermore, we present an optimization model of ideal ITCDIC, which can be used to achieve the maximum energy saving and find the optimal design parameters directly. The binary system of benzene-toluene is adopted for the illustrative example of simulation and optimization. The results show that the maximum energy saving of ITCDIC is 52.25% (compared with energy consumption of conventional distillation under the minimum reflux ratio operation); the optimal design parameters are obtained, where the rectifying section pressure and the feed thermal condition are Pr=0.3006 MPa and q=0.5107 respectively.展开更多
In this paper, a new approach using artificial neural network and genetic algorithm for the optimization of the thermally coupled distillation is presented. Mathematical model can be constructed with artificial neura...In this paper, a new approach using artificial neural network and genetic algorithm for the optimization of the thermally coupled distillation is presented. Mathematical model can be constructed with artificial neural network based on the simulation results with ASPEN PLUS. Modified genetic algorithm was used to optimize the model. With the proposed model and optimization arithmetic, mathematical model can be calculated, decision variables and target value can be reached automatically and quickly. A practical example is used to demonstrate the algorithm.展开更多
Finite element simulations were conducted to study the mechanism of spark plasma sintering. The spark plasma sintering of SiC ceramics was simulated by the Marc software based on the load current curve and temperature...Finite element simulations were conducted to study the mechanism of spark plasma sintering. The spark plasma sintering of SiC ceramics was simulated by the Marc software based on the load current curve and temperature-time curve deserved by SPS experiment. The concept of equivalent radiation coefficient was presented and applied during the simulation. The temperature distribution regularity of SiC ceramics sintered by SPS technology was got by thermal-electrical coupled finite element simulation. The experimental results show that by thermal-electrical coupled finite element analysis, the temperature rising and distribution regularity of nonconductive material can be preferable forecasted in the sintering process of SPS. In the initial stage of the heat preservation, the temperature of the central part of the sample has achieved sintering temperature, but now, the temperature of the sample is not uniform. The temperature for each part of the die is also quite different and the sample temperature in the center is higher than that in the edge. In the end of heat preservation, the central temperature of the sample is 50 ℃higher than the required sintering temperature, and the temperature gap for each part of the die decreases gradually.展开更多
<div style="text-align:justify;"> Rainfall infiltration is a porous medium flow problem with variable saturation. Based on the theoretical analysis of the flow field, electrical conductivity of rocks, ...<div style="text-align:justify;"> Rainfall infiltration is a porous medium flow problem with variable saturation. Based on the theoretical analysis of the flow field, electrical conductivity of rocks, the electrical field, the paper simulates the coupling relationship between the water saturation in soil and the apparent resistivity distribution. It combines the Richards equation, the Archie formula and the Laplace equation. The experiment simulates the potential field data by the Wenner setting in electrical exploration on a two-layer geologic model with continuous rainfall during 5 days, which shows that the effective saturation in soil is increasing with the rainfall time, while the apparent resistivity is decreasing. This can provide a theoretical basis for the analyzing the rainfall infiltration and porosity of the soil by using high-density electrical method in the future. </div>展开更多
Combined with the parameters of the production process of a steel factory, numerical simulations for a new ladle from preheating to turnover are conducted using the finite element analysis system software （ANSYS）. T...Combined with the parameters of the production process of a steel factory, numerical simulations for a new ladle from preheating to turnover are conducted using the finite element analysis system software （ANSYS）. The measured data proved that the simulated results are reliable. The effects of preheating time, thermal cycling times, and empty package time on steel temperature are calculated, an ideal preheating time is provided, besides, based on the analysis of a single factor and use the nonlinear analysis method, a steel temperature compensating model with di- versified coupling factors is proposed, with the largest error of the present coupling model at 1. 462 ~C, and the er- rors between actual and target steel temperature in tundish after the model is applied to practical production are basi- cally controlled within -4-6 ~C, which can meet the accuracy of the manufacturer and has a practical guiding significance for the production in steelmaking workshops.展开更多
Metal–organic gel(MOG)derived composites are promising multi-functional materials due to their alterable composition,identifiable chemical homogeneity,tunable shape,and porous structure.Herein,stable metal–organic h...Metal–organic gel(MOG)derived composites are promising multi-functional materials due to their alterable composition,identifiable chemical homogeneity,tunable shape,and porous structure.Herein,stable metal–organic hydrogels are prepared by regulating the complexation effect,solution polarity and curing speed.Meanwhile,collagen peptide is used to facilitate the fabrication of a porous aerogel with excellent physical properties as well as the homogeneous dispersion of magnetic particles during calcination.Subsequently,two kinds of heterometallic magnetic coupling systems are obtained through the application of Kirkendall effect.FeCo/nitrogen-doped carbon(NC)aerogel demonstrates an ultra-strong microwave absorption of−85 dB at an ultra-low loading of 5%.After reducing the time taken by atom shifting,a FeCo/Fe3O4/NC aerogel containing virus-shaped particles is obtained,which achieves an ultra-broad absorption of 7.44 GHz at an ultra-thin thickness of 1.59 mm due to the coupling effect offered by dual-soft-magnetic particles.Furthermore,both aerogels show excellent thermal insulation property,and their outstanding radar stealth performances in J-20 aircraft are confirmed by computer simulation technology.The formation mechanism of MOG is also discussed along with the thermal insulation and electromagnetic wave absorption mechanism of the aerogels,which will enable the development and application of novel and lightweight stealth coatings.展开更多
In this paper, thermoelastic problem of onedimensional copper rod under thermal shock is simulated using molecular dynamics method by adopting embedded atom method potential. The rod is on axis x, the left outermost s...In this paper, thermoelastic problem of onedimensional copper rod under thermal shock is simulated using molecular dynamics method by adopting embedded atom method potential. The rod is on axis x, the left outermost surface of which is traction free and the right outermost surface is fixed. Free boundary condition is imposed on the outermost surfaces in direction y and z. The left and right ends of the rod are subjected to hot and cold baths, respectively. Temperature, displacement and stress distributions are obtained along the rod at different moments, which are shown to be limited in the mobile region, indicating that the heat propagation speed is limited rather than infinite. This is consistent with the prediction given by generalized thermoelastic theory. From simulation results we find that the speed of heat conduction is the same as the speed of thermal stress wave. In the present paper, the simulations are conducted using the large-scale atomic/molecular massively parallel simulator and completed visualization software.展开更多
The electric field intensity (EFI) is important characteristic quantity for evaluating the internal insulation state of cable joints. Based on finite element method, this paper proposes two EFI research methods, field...The electric field intensity (EFI) is important characteristic quantity for evaluating the internal insulation state of cable joints. Based on finite element method, this paper proposes two EFI research methods, field-circuit coupling method and equivalent circuit method. The average EFI of the inner surface of the outer semi-conducting shield can be calculated from the current in the measuring circuit. The relative error between these two methods is about 15%, which roughly proves the consistency of the two methods. Further practical application research enables online monitoring of cable joints.展开更多
Supported by the high-speed SGI engineering workstation and the general MARCTM software, a system is developed to simulate the hot deformation process and the cooling process after deformation in the forging of Cr12 s...Supported by the high-speed SGI engineering workstation and the general MARCTM software, a system is developed to simulate the hot deformation process and the cooling process after deformation in the forging of Cr12 steel on the basis of elastic-plastic FEM techniques with coupled thermal-mechanical-microstructural alteration. In this system, a mathematical model, obtained by plentiful physical simulation experiments on Gleeble 1500 thermomechanical simulator, is introduced to describe the changes in microstructure and properties of steels. This system is proved to be reliable to simulate the thermal field and stress field as well as the microstructure of Cr12 steel during the forging process. It can also be used to optimize and control the forging process.展开更多
We calculate the electrical and thermal conductivity of hydrogen for a wide range of densities and temperatures by using molecular dynamics simulations informed by density functional theory.On the basis of the corresp...We calculate the electrical and thermal conductivity of hydrogen for a wide range of densities and temperatures by using molecular dynamics simulations informed by density functional theory.On the basis of the corresponding extended ab initio data set,we construct interpolation formulas covering the range from low-density,high-temperature to high-density,low-temperature plasmas.Our conductivity model repro-duces the well-known limits of the Spitzer and Ziman theory.We compare with available experimental data andfind very good agreement.The new conductivity model can be applied,for example,in dynamo simulations for magneticfield generation in gas giant planets,brown dwarfs,and stellar envelopes.展开更多
Decoupling electrical and thermal properties to enhance the figure of merit of thermoelectric materials underscores an in-depth understanding of the mechanisms that govern the transfer of charge carriers.Typically,a f...Decoupling electrical and thermal properties to enhance the figure of merit of thermoelectric materials underscores an in-depth understanding of the mechanisms that govern the transfer of charge carriers.Typically,a factor that contributes to the optimization of thermal conductivity is often found to be detrimental to the electrical transport properties.Here,we systematically investigated 26 dimeric MX_(2)-type compounds(where M represents a metal and X represents a nonmetal element)to explore the influence of the electronic configurations of metal cations on lattice thermal transport and thermoelectric performance using first-principles calculations.A principled scheme has been identified that the filled outer orbitals of the cation lead to a significantly lower lattice thermal conductivity compared to that of the partly occupied case for MX_(2),due to the much weakened bonds manifested by the shallow potential well,smaller interatomic force constants,and higher atomic displacement parameters.Based on these findings,we propose two ionic compounds,BaAs and BaSe_(2),to realize reasonable high electrical conductivities through the structural anisotropy caused by the inserted covalent X_(2) dimers while still maintaining the large lattice anharmonicity.The combined superior electrical and thermal properties of BaSe_(2) lead to a high n-type thermoelectric ZT value of 2.3 at 500 K.This work clarifies the structural origin of the heat transport properties of dimeric MX_(2)-type compounds and provides an insightful strategy for developing promising thermoelectric materials.展开更多
The interaction between the active chips mounted and the same base plate is considered as a thermoelectrical coupling effect.An approach to coupling effect analysis of a multi-chip system is presented with IGBT as a s...The interaction between the active chips mounted and the same base plate is considered as a thermoelectrical coupling effect.An approach to coupling effect analysis of a multi-chip system is presented with IGBT as a sample.Finite element method is used to evaluate the temperature distribution in power modules.The precise electrothermal model is obtained by fitting the curve of transient thermal impedance with a finite series of exponential terms,in which,the thermal-coupling effect among chips is considered as a prediction of the highest transient temperature of the chips.This model can be used in many thermal monitoring systems.Both ANSYS and PSPICE si- mulation software have been employed,and the simulation results agree with the experimental ones very well.展开更多
Accurate thermal comfort simulation methods can significantly enhance both the effectiveness and efficiency of cabin thermal comfort design.However,current thermal comfort simulation methods often overlook the interac...Accurate thermal comfort simulation methods can significantly enhance both the effectiveness and efficiency of cabin thermal comfort design.However,current thermal comfort simulation methods often overlook the interaction between environmental factors and human physiological responses,particularly in the context of cabin thermal comfort simulations under solar radiation conditions,where there is a lack of standardized approaches.This study establishes a bidirectional coupling simulation framework that incorporates the interaction between environmental factors and human physiological regulation.The proposed method integrates CFD,thermophysiological models,and thermal psychological models.Specifically,the thermophysiological component of the framework compares three models:the JOS-3 model,the Fiala model,and the TCM model.The thermal psychological model utilizes the Berkeley model.The computational accuracy of the proposed bidirectional coupling simulation framework is evaluated under both steady-state office environments and transient outdoor parking cases.Furthermore,the simulation results are compared with those obtained from three uncoupled thermal comfort evaluation models—PMV,DTS,and Lai’s model—under transient environmental conditions.The results demonstrate that the CFD-JOS3-Berkeley bidirectional coupling simulation method achieves the lowest prediction error for both local and mean skin temperatures.Its overall thermal sensation prediction accuracy is superior to other thermal comfort evaluation methods,improving by 5.16,3.91 and 3.75 times compared to non-coupled thermal comfort evaluation models PMV,DTS,and Lai’s.The study further highlights that coupled simulation calculations should prioritize the use of local thermal insulation values as inputs to human thermophysiological models,with special emphasis on core body regions and exposed skin areas such as the head,hands,and lower legs in summer conditions.This research establishes a high-precision thermal comfort simulation method suitable for transient cabin environments under solar radiation,offering a reliable tool for evaluating cabin thermal comfort.展开更多
Compared with a conventional Hall Heroult cell(H H cell), the interpolar distance of a drained cell can be reduced significantly and the cell voltage and heat produced in the electrolysis will decrease greatly as well...Compared with a conventional Hall Heroult cell(H H cell), the interpolar distance of a drained cell can be reduced significantly and the cell voltage and heat produced in the electrolysis will decrease greatly as well, which makes it crucial to achieve a new heat balance in the drained cell. A half anode cathode slice model of a hypothetical drained cell retrofitted from a 160 kA currently used in H H cell was developed for the thermo electric calculation and simulation. The results were presented and analyzed and possible approaches for setting up a new heat balance in a drained cell were discussed.展开更多
In recent years, Combined electro-thermal system has developed rapidly. In order to provide the initial data for the analysis of the combined electro-thermal system, a practical energy flow calculation method for the ...In recent years, Combined electro-thermal system has developed rapidly. In order to provide the initial data for the analysis of the combined electro-thermal system, a practical energy flow calculation method for the combined electro-thermal system is proposed in this paper. Based on the detailed analysis of the topology structure of the heating network and its hydraulic and thermodynamic model, the forward-backward sweep method for the heat flow of the heating network is established, which is more suitable for the actual radial heating network. The electric and thermal coupling model for heating source, such as thermoelectric unit and electric boiler is established, and the heat flow of heating network and the power flow of power grid are calculated orderly, thus a fast calculation method for the combined electro-thermal system is formed. What’s more, a combined electro-thermal system with two-stage peak-shaving electric boiler is used as the example system. This paper validates the effectiveness and rapidity of this method through the example system, and analyzes the influence for the energy flow of combined electro-thermal system caused by the operating parameters such as the installation location of electric boiler, the outlet water temperature of heat source and the outlet flow rate, etc.展开更多
This study focuses on the distribution of high-resistance media(pores and spinels)within ZnO varistors and explores the mechanical and electrical failure mechanisms of varistors under different pulse actions.Micro-CT ...This study focuses on the distribution of high-resistance media(pores and spinels)within ZnO varistors and explores the mechanical and electrical failure mechanisms of varistors under different pulse actions.Micro-CT technology revealed that the proportion of high-resistance media in the edge area is much higher than in the internal area.Simulation results indicated that a high porosity significantly increased temperature rise and thermal stress concentration,while a high spinel proportion exacerbated current concentration but had a relatively minor impact on the distribution of temperature rise and thermal stress.Under an electric field of 1000-1250 V/mm,pores transition from an insulating state to a conductive state,especially in the edge area,leading to concentrated temperature rise and thermal stress.Once the thermal stress exceeded the critical value of the mechanical strength of the pores,cracking failure occurred.The high spinel proportion in the edge area further intensified current concentration under high electric fields,working together with the conductivity of the pores to produce a significant local temperature rise,melting grain structure,and ultimately leading to puncture failure.This study provides a new perspective for understanding the failure mechanism of ZnO varistors and lays a theoretical foundation for the development of varistor materials with high energy absorption capacity.展开更多
The development of advanced magnetoelectric(ME)composites necessitates high-performance materials that arecapable of achieving high levels of ME coupling,minimal magnetic loss,and absence or limited reliance on extern...The development of advanced magnetoelectric(ME)composites necessitates high-performance materials that arecapable of achieving high levels of ME coupling,minimal magnetic loss,and absence or limited reliance on externalexcitation sources.In this paper,a(2-2)connectivity ME laminate integrates multiple layers of FeSiB alloy(Metglas)andPb(Mg,Nb)O_(3)-PbTiO_(3)(PMN-PT)single crystal,achieving a remarkable ME coupling coefficient of 2033.4 V/Oe·cm(sevenfold rise)by laser thermal annealing treatment.Here,the laser-induced nanostructures on Metglas,with anoxidized insulation layer and soft and hard magnetic dipole layer improve the Magneto-electric-mechanical couplingwith a mechanical quality factor(Q_(m))exceeding 350.More importantly,the interaction between amorphous andnanocrystalline dipoles triggers an Exchange Bias(EB)effect,leading to a self-biasing performance of 67.45 V/Oe·cm.Furthermore,the composite exhibits an excellent passive DC magnetic detection limit of 22 nT,and an improved weakAC magnetic detection limit down to 383 fT.These explorations offer the potential to enhance passive currentmeasurement,and underwater communication,extend weak magnetic positioning and brain magnetic detection.展开更多
文摘During the propagation of high-power lasers within internal channels,the laser beam heats the propagation medium,causing the thermal blooming effect that degrades the beam quality at the output.The intricate configuration of the optical path within the internal channel necessitates complex and time-consuming efforts to assess the impact of thermal blooming effect on the optical path.To meet the engineering need for rapid evaluation of thermal blooming effect in optical paths,this study proposed a rapid simulation method for the thermal blooming effect in internal optical paths based on the finite element method.This method discretized the fluid region into infinitesimal elements and employed finite element method for flow field analysis.A simplified analytical model of the flow field region in complex internal channels was established,and regions with similar thermal blooming effect were divided within this model.Based on the calculated optical path differences within these regions,numerical simulations of phase distortion caused by thermal blooming were conducted.The calculated result were compared with those obtained using the existing methods.The findings reveal that for complex optical paths,the discrepancy between the two approaches is less than 3.6%,with similar phase distortion patterns observed.For L-type units,this method and the existing methods identify the same primary factors influencing aberrations and exhibit consistent trends in their variation.This method was used to analyze the impact of thermal blooming effect in a straight channel under different gravity directions.The results show that phase distortion varies with changes in the direction of gravity,and the magnitude of the phase difference is strongly correlated with the component of gravity perpendicular to the optical axis.Compared to the existing methods,this approach offers greater flexibility,obviates the need for complex custom analysis programming.The analytical results of this method enable a rapid assessment of the thermal blooming effect in optical paths within the internal channel.This is especially useful during the engineering design.These results also provide crucial references for developing strategies to suppress thermal blooming effect.
基金the support from the National Natural Science Foundation of China(52403112,52473083)Natural Science Basic Research Program of Shaanxi(2024JC-TBZC-04)+2 种基金the Innovation Capability Support Program of Shaanxi(2024RS-CXTD-57)Fundamental Research Funds for the Central Universities(D5000240062,D5000240077)Undergraduate Innovation&Business Program in Northwestern Polytechnical University(202410699041)。
文摘High-performance Ti_(3)C_(2)T_(x)fibers have garnered significant potential for smart fibers enabled fabrics.Nonetheless,a major challenge hindering their widespread use is the lack of strong interlayer interactions between Ti_(3)C_(2)T_(x)nanosheets within fibers,which restricts their properties.Herein,a versatile strategy is proposed to construct wet-spun Ti_(3)C_(2)T_(x)fibers,in which trace amounts of borate form strong interlayer crosslinking between Ti_(3)C_(2)T_(x)nanosheets to significantly enhance interactions as supported by density functional theory calculations,thereby reducing interlayer spacing,diminishing microscopic voids and promoting orientation of the nanosheets.The resultant Ti_(3)C_(2)T_(x)fibers exhibit exceptional electrical conductivity of 7781 S cm^(-1)and mechanical properties,including tensile strength of 188.72 MPa and Young's modulus of 52.42 GPa.Notably,employing equilibrium molecular dynamics simulations,finite element analysis,and cross-wire geometry method,it is revealed that such crosslinking also effectively lowers interfacial thermal resistance and ultimately elevates thermal conductivity of Ti_(3)C_(2)T_(x)fibers to 13 W m^(-1)K^(-1),marking the first systematic study on thermal conductivity of Ti_(3)C_(2)T_(x)fibers.The simple and efficient interlayer crosslinking enhancement strategy not only enables the construction of thermal conductivity Ti_(3)C_(2)T_(x)fibers with high electrical conductivity for smart textiles,but also offers a scalable approach for assembling other nanomaterials into multifunctional fibers.
基金Supported by the National Environmental Protection Bureau of P.R.China(Huan-Ke-Ke,1997,No.006,Project 14),China-Japan cooperative project:"Research on energy savings and alleviating environmental burden in petroleum enterprises"of Institute of Industrial
文摘Internal thermally coupled distillation columns (ITCDIC) are the frontier of distillation energy saving research. In this paper, a novel energy saving model of ideal ITCDIC and a simulation algorithm are presented,upon which a series of comparative studies on energy savings with conventional distillation columns are carried out. Furthermore, we present an optimization model of ideal ITCDIC, which can be used to achieve the maximum energy saving and find the optimal design parameters directly. The binary system of benzene-toluene is adopted for the illustrative example of simulation and optimization. The results show that the maximum energy saving of ITCDIC is 52.25% (compared with energy consumption of conventional distillation under the minimum reflux ratio operation); the optimal design parameters are obtained, where the rectifying section pressure and the feed thermal condition are Pr=0.3006 MPa and q=0.5107 respectively.
文摘In this paper, a new approach using artificial neural network and genetic algorithm for the optimization of the thermally coupled distillation is presented. Mathematical model can be constructed with artificial neural network based on the simulation results with ASPEN PLUS. Modified genetic algorithm was used to optimize the model. With the proposed model and optimization arithmetic, mathematical model can be calculated, decision variables and target value can be reached automatically and quickly. A practical example is used to demonstrate the algorithm.
基金Funded by the Natural Science Foundation of Hebei Province, China (No.E2012203086)
文摘Finite element simulations were conducted to study the mechanism of spark plasma sintering. The spark plasma sintering of SiC ceramics was simulated by the Marc software based on the load current curve and temperature-time curve deserved by SPS experiment. The concept of equivalent radiation coefficient was presented and applied during the simulation. The temperature distribution regularity of SiC ceramics sintered by SPS technology was got by thermal-electrical coupled finite element simulation. The experimental results show that by thermal-electrical coupled finite element analysis, the temperature rising and distribution regularity of nonconductive material can be preferable forecasted in the sintering process of SPS. In the initial stage of the heat preservation, the temperature of the central part of the sample has achieved sintering temperature, but now, the temperature of the sample is not uniform. The temperature for each part of the die is also quite different and the sample temperature in the center is higher than that in the edge. In the end of heat preservation, the central temperature of the sample is 50 ℃higher than the required sintering temperature, and the temperature gap for each part of the die decreases gradually.
文摘<div style="text-align:justify;"> Rainfall infiltration is a porous medium flow problem with variable saturation. Based on the theoretical analysis of the flow field, electrical conductivity of rocks, the electrical field, the paper simulates the coupling relationship between the water saturation in soil and the apparent resistivity distribution. It combines the Richards equation, the Archie formula and the Laplace equation. The experiment simulates the potential field data by the Wenner setting in electrical exploration on a two-layer geologic model with continuous rainfall during 5 days, which shows that the effective saturation in soil is increasing with the rainfall time, while the apparent resistivity is decreasing. This can provide a theoretical basis for the analyzing the rainfall infiltration and porosity of the soil by using high-density electrical method in the future. </div>
基金Item Sponsored by Technology Supporting Program During the 11th Five-Year Plan Period(BAE03A07)
文摘Combined with the parameters of the production process of a steel factory, numerical simulations for a new ladle from preheating to turnover are conducted using the finite element analysis system software （ANSYS）. The measured data proved that the simulated results are reliable. The effects of preheating time, thermal cycling times, and empty package time on steel temperature are calculated, an ideal preheating time is provided, besides, based on the analysis of a single factor and use the nonlinear analysis method, a steel temperature compensating model with di- versified coupling factors is proposed, with the largest error of the present coupling model at 1. 462 ~C, and the er- rors between actual and target steel temperature in tundish after the model is applied to practical production are basi- cally controlled within -4-6 ~C, which can meet the accuracy of the manufacturer and has a practical guiding significance for the production in steelmaking workshops.
基金the National Natural Science Foundation of China(22265021)the Aeronautical Science Foundation of China(2020Z056056003).
文摘Metal–organic gel(MOG)derived composites are promising multi-functional materials due to their alterable composition,identifiable chemical homogeneity,tunable shape,and porous structure.Herein,stable metal–organic hydrogels are prepared by regulating the complexation effect,solution polarity and curing speed.Meanwhile,collagen peptide is used to facilitate the fabrication of a porous aerogel with excellent physical properties as well as the homogeneous dispersion of magnetic particles during calcination.Subsequently,two kinds of heterometallic magnetic coupling systems are obtained through the application of Kirkendall effect.FeCo/nitrogen-doped carbon(NC)aerogel demonstrates an ultra-strong microwave absorption of−85 dB at an ultra-low loading of 5%.After reducing the time taken by atom shifting,a FeCo/Fe3O4/NC aerogel containing virus-shaped particles is obtained,which achieves an ultra-broad absorption of 7.44 GHz at an ultra-thin thickness of 1.59 mm due to the coupling effect offered by dual-soft-magnetic particles.Furthermore,both aerogels show excellent thermal insulation property,and their outstanding radar stealth performances in J-20 aircraft are confirmed by computer simulation technology.The formation mechanism of MOG is also discussed along with the thermal insulation and electromagnetic wave absorption mechanism of the aerogels,which will enable the development and application of novel and lightweight stealth coatings.
基金supported by the National Natural Science Foundation of China (10872158)
文摘In this paper, thermoelastic problem of onedimensional copper rod under thermal shock is simulated using molecular dynamics method by adopting embedded atom method potential. The rod is on axis x, the left outermost surface of which is traction free and the right outermost surface is fixed. Free boundary condition is imposed on the outermost surfaces in direction y and z. The left and right ends of the rod are subjected to hot and cold baths, respectively. Temperature, displacement and stress distributions are obtained along the rod at different moments, which are shown to be limited in the mobile region, indicating that the heat propagation speed is limited rather than infinite. This is consistent with the prediction given by generalized thermoelastic theory. From simulation results we find that the speed of heat conduction is the same as the speed of thermal stress wave. In the present paper, the simulations are conducted using the large-scale atomic/molecular massively parallel simulator and completed visualization software.
文摘The electric field intensity (EFI) is important characteristic quantity for evaluating the internal insulation state of cable joints. Based on finite element method, this paper proposes two EFI research methods, field-circuit coupling method and equivalent circuit method. The average EFI of the inner surface of the outer semi-conducting shield can be calculated from the current in the measuring circuit. The relative error between these two methods is about 15%, which roughly proves the consistency of the two methods. Further practical application research enables online monitoring of cable joints.
文摘Supported by the high-speed SGI engineering workstation and the general MARCTM software, a system is developed to simulate the hot deformation process and the cooling process after deformation in the forging of Cr12 steel on the basis of elastic-plastic FEM techniques with coupled thermal-mechanical-microstructural alteration. In this system, a mathematical model, obtained by plentiful physical simulation experiments on Gleeble 1500 thermomechanical simulator, is introduced to describe the changes in microstructure and properties of steels. This system is proved to be reliable to simulate the thermal field and stress field as well as the microstructure of Cr12 steel during the forging process. It can also be used to optimize and control the forging process.
基金supported by the Priority Program SPP 1992 of the German Science Foundation(DFG)The Diversity of Exoplanets under project number 362460292.
文摘We calculate the electrical and thermal conductivity of hydrogen for a wide range of densities and temperatures by using molecular dynamics simulations informed by density functional theory.On the basis of the corresponding extended ab initio data set,we construct interpolation formulas covering the range from low-density,high-temperature to high-density,low-temperature plasmas.Our conductivity model repro-duces the well-known limits of the Spitzer and Ziman theory.We compare with available experimental data andfind very good agreement.The new conductivity model can be applied,for example,in dynamo simulations for magneticfield generation in gas giant planets,brown dwarfs,and stellar envelopes.
基金financial support from the Natural Science Foundation of China(No.11904089,12174092,11674087)the Overseas Expertise Introduction Center for Discipline Innovation(D18025)+1 种基金the Program for Key Research and Development of Science and Technology in Hubei Province(grant No.2023BEB002)supported by the Young Science Foundation of Hubei University(Grant No.430/184303000047).
文摘Decoupling electrical and thermal properties to enhance the figure of merit of thermoelectric materials underscores an in-depth understanding of the mechanisms that govern the transfer of charge carriers.Typically,a factor that contributes to the optimization of thermal conductivity is often found to be detrimental to the electrical transport properties.Here,we systematically investigated 26 dimeric MX_(2)-type compounds(where M represents a metal and X represents a nonmetal element)to explore the influence of the electronic configurations of metal cations on lattice thermal transport and thermoelectric performance using first-principles calculations.A principled scheme has been identified that the filled outer orbitals of the cation lead to a significantly lower lattice thermal conductivity compared to that of the partly occupied case for MX_(2),due to the much weakened bonds manifested by the shallow potential well,smaller interatomic force constants,and higher atomic displacement parameters.Based on these findings,we propose two ionic compounds,BaAs and BaSe_(2),to realize reasonable high electrical conductivities through the structural anisotropy caused by the inserted covalent X_(2) dimers while still maintaining the large lattice anharmonicity.The combined superior electrical and thermal properties of BaSe_(2) lead to a high n-type thermoelectric ZT value of 2.3 at 500 K.This work clarifies the structural origin of the heat transport properties of dimeric MX_(2)-type compounds and provides an insightful strategy for developing promising thermoelectric materials.
文摘The interaction between the active chips mounted and the same base plate is considered as a thermoelectrical coupling effect.An approach to coupling effect analysis of a multi-chip system is presented with IGBT as a sample.Finite element method is used to evaluate the temperature distribution in power modules.The precise electrothermal model is obtained by fitting the curve of transient thermal impedance with a finite series of exponential terms,in which,the thermal-coupling effect among chips is considered as a prediction of the highest transient temperature of the chips.This model can be used in many thermal monitoring systems.Both ANSYS and PSPICE si- mulation software have been employed,and the simulation results agree with the experimental ones very well.
文摘Accurate thermal comfort simulation methods can significantly enhance both the effectiveness and efficiency of cabin thermal comfort design.However,current thermal comfort simulation methods often overlook the interaction between environmental factors and human physiological responses,particularly in the context of cabin thermal comfort simulations under solar radiation conditions,where there is a lack of standardized approaches.This study establishes a bidirectional coupling simulation framework that incorporates the interaction between environmental factors and human physiological regulation.The proposed method integrates CFD,thermophysiological models,and thermal psychological models.Specifically,the thermophysiological component of the framework compares three models:the JOS-3 model,the Fiala model,and the TCM model.The thermal psychological model utilizes the Berkeley model.The computational accuracy of the proposed bidirectional coupling simulation framework is evaluated under both steady-state office environments and transient outdoor parking cases.Furthermore,the simulation results are compared with those obtained from three uncoupled thermal comfort evaluation models—PMV,DTS,and Lai’s model—under transient environmental conditions.The results demonstrate that the CFD-JOS3-Berkeley bidirectional coupling simulation method achieves the lowest prediction error for both local and mean skin temperatures.Its overall thermal sensation prediction accuracy is superior to other thermal comfort evaluation methods,improving by 5.16,3.91 and 3.75 times compared to non-coupled thermal comfort evaluation models PMV,DTS,and Lai’s.The study further highlights that coupled simulation calculations should prioritize the use of local thermal insulation values as inputs to human thermophysiological models,with special emphasis on core body regions and exposed skin areas such as the head,hands,and lower legs in summer conditions.This research establishes a high-precision thermal comfort simulation method suitable for transient cabin environments under solar radiation,offering a reliable tool for evaluating cabin thermal comfort.
文摘Compared with a conventional Hall Heroult cell(H H cell), the interpolar distance of a drained cell can be reduced significantly and the cell voltage and heat produced in the electrolysis will decrease greatly as well, which makes it crucial to achieve a new heat balance in the drained cell. A half anode cathode slice model of a hypothetical drained cell retrofitted from a 160 kA currently used in H H cell was developed for the thermo electric calculation and simulation. The results were presented and analyzed and possible approaches for setting up a new heat balance in a drained cell were discussed.
文摘In recent years, Combined electro-thermal system has developed rapidly. In order to provide the initial data for the analysis of the combined electro-thermal system, a practical energy flow calculation method for the combined electro-thermal system is proposed in this paper. Based on the detailed analysis of the topology structure of the heating network and its hydraulic and thermodynamic model, the forward-backward sweep method for the heat flow of the heating network is established, which is more suitable for the actual radial heating network. The electric and thermal coupling model for heating source, such as thermoelectric unit and electric boiler is established, and the heat flow of heating network and the power flow of power grid are calculated orderly, thus a fast calculation method for the combined electro-thermal system is formed. What’s more, a combined electro-thermal system with two-stage peak-shaving electric boiler is used as the example system. This paper validates the effectiveness and rapidity of this method through the example system, and analyzes the influence for the energy flow of combined electro-thermal system caused by the operating parameters such as the installation location of electric boiler, the outlet water temperature of heat source and the outlet flow rate, etc.
基金National Natural Science Foundation of China(Youth Fund Program),Grant/Award Number:52107158Natural Science Foundation of Sichuan Province,Grant/Award Number:2024NSFSC0116Project of‘Gathering Resources to Prosper Sichuan’,Grant/Award Number:25JYXC0046。
文摘This study focuses on the distribution of high-resistance media(pores and spinels)within ZnO varistors and explores the mechanical and electrical failure mechanisms of varistors under different pulse actions.Micro-CT technology revealed that the proportion of high-resistance media in the edge area is much higher than in the internal area.Simulation results indicated that a high porosity significantly increased temperature rise and thermal stress concentration,while a high spinel proportion exacerbated current concentration but had a relatively minor impact on the distribution of temperature rise and thermal stress.Under an electric field of 1000-1250 V/mm,pores transition from an insulating state to a conductive state,especially in the edge area,leading to concentrated temperature rise and thermal stress.Once the thermal stress exceeded the critical value of the mechanical strength of the pores,cracking failure occurred.The high spinel proportion in the edge area further intensified current concentration under high electric fields,working together with the conductivity of the pores to produce a significant local temperature rise,melting grain structure,and ultimately leading to puncture failure.This study provides a new perspective for understanding the failure mechanism of ZnO varistors and lays a theoretical foundation for the development of varistor materials with high energy absorption capacity.
基金supported by the National Key Research and Development Program(Grant No.2021YFB3201800)the Natural Science Foundation of China(Grants 62131017,U22A2019)the Key R&D Project of Shaanxi Province-University Joint Project(2023GXLH-020).
文摘The development of advanced magnetoelectric(ME)composites necessitates high-performance materials that arecapable of achieving high levels of ME coupling,minimal magnetic loss,and absence or limited reliance on externalexcitation sources.In this paper,a(2-2)connectivity ME laminate integrates multiple layers of FeSiB alloy(Metglas)andPb(Mg,Nb)O_(3)-PbTiO_(3)(PMN-PT)single crystal,achieving a remarkable ME coupling coefficient of 2033.4 V/Oe·cm(sevenfold rise)by laser thermal annealing treatment.Here,the laser-induced nanostructures on Metglas,with anoxidized insulation layer and soft and hard magnetic dipole layer improve the Magneto-electric-mechanical couplingwith a mechanical quality factor(Q_(m))exceeding 350.More importantly,the interaction between amorphous andnanocrystalline dipoles triggers an Exchange Bias(EB)effect,leading to a self-biasing performance of 67.45 V/Oe·cm.Furthermore,the composite exhibits an excellent passive DC magnetic detection limit of 22 nT,and an improved weakAC magnetic detection limit down to 383 fT.These explorations offer the potential to enhance passive currentmeasurement,and underwater communication,extend weak magnetic positioning and brain magnetic detection.
