The flexoelectric effect refers to the electromechanical coupling between electric polarization and mechanical strain gradient.It universally exists in a variety of materials in any space group,such as liquid crystals...The flexoelectric effect refers to the electromechanical coupling between electric polarization and mechanical strain gradient.It universally exists in a variety of materials in any space group,such as liquid crystals,dielectrics,biological materials,and semiconductors.Because of its unique size effect,nanoscale flexoelectricity has shown novel phenomena and promising applications in electronics,optronics,mechatronics,and photovoltaics.In this review,we provide a succinct report on the discovery and development of the flexoelectric effect,focusing on flexoelectric materials and related applications.Finally,we discuss recent flexoelectric research progress and still‐unsolved problems.展开更多
Solvated zinc ions are prone to undergo desolvation at the electrode/electrolyte interfaces,and unstable H_(2)O molecules within the solvated sheaths tend to trigger hydrogen evolution reaction(HER),further accelerati...Solvated zinc ions are prone to undergo desolvation at the electrode/electrolyte interfaces,and unstable H_(2)O molecules within the solvated sheaths tend to trigger hydrogen evolution reaction(HER),further accelerating interfaces decay.Herein,we propose for the first time a novel strategy to enhance the interfacial stabilities by insitu dynamic reconstruction of weakly solvated Zn2þduring the desolvation processes at heterointerfaces.Theoretical calculations indicate that,due to built-in electric field effects(BEFs),the plating/stripping mechanism shifts from[Zn(H_(2)O)_(6)]_(2)þto[Zn(H_(2)O)_(5)(SO_(4))^(2-)]_(2)þwithout additional electrolyte additives,reducing the solvation ability of H_(2)O,enhancing the competitive coordination of SO_(4)^(2-),essentially eliminating the undesirable side effects of anodes.Hence,symmetric cells can operate stably for 3000 h(51.7-times increase in cycle life),and the full cells can operate stably for 5000 cycles(51.5-times increase in cycle life).This study provides valuable insights into the critical design of weakly solvated Zn^(2+) þand desolvation processes at heterointerfaces.展开更多
Evaluation of backfilling effectiveness plays a crucial role in the geological environment management and restoration of abandoned open-pit quarries,providing a scientific basis for subsequent greening efforts.Backfil...Evaluation of backfilling effectiveness plays a crucial role in the geological environment management and restoration of abandoned open-pit quarries,providing a scientific basis for subsequent greening efforts.Backfill soil,predominantly composed of silty clay,demonstrates high water retention capacity and elevated moisture content,leading to a pronounced resistivity contrast with the bedrock exposed by quarrying activities.To investigate the distribution of backfill soil subsurface and assess backfilling effectiveness in the study area,this study conducted a comprehensive geophysical investigation utilizing the high-density electrical resistivity tomography(ERT).A total of 19 ERT survey lines were deployed across three distinct areas in Liuyao Village,Huaibei City,Anhui Province,China.The inversion results,derived from both two-dimensional(2D)and three-dimensional(3D),reveal distinct electrical properties of the subsurface materials:the backfill soil layer shows low resistivity features,the fill stone layer exhibits medium to high resistivity,and the bedrock shows the highest resistivity.The 2D inversion results,from the data measured using the Wenner array effectively capture the spatial distribution and structural features of the backfill soil layer.The findings indicate a gradual east-west thinning of the clay layer within the quarry.Furthermore,the northern pit area exhibits a uniform distribution of backfill soil layer,indicative of effective backfilling operations.In contrast,the southern pit area lacks a well-defined clay layer,suggesting suboptimal backfilling effectiveness.展开更多
The coupling of fast redox kinetics,high-energy density,and prolonged lifespan is a permanent aspiration for aqueous rechargeable zinc batteries,but which has been severely hampered by a narrow voltage range and subop...The coupling of fast redox kinetics,high-energy density,and prolonged lifespan is a permanent aspiration for aqueous rechargeable zinc batteries,but which has been severely hampered by a narrow voltage range and suboptimal compatibility between the electrolytes and electrodes.Here,we unprecedentedly introduced an electric ambipolar effect for synergistic manipulation on Zn^(2+)ternary-hydrated eutectic electrolyte(ZTE)enabling high-performance Zn-Br_(2)batteries.The electric ambipolar effect motivates strong dipole interactions among hydrated perchlorates and bipolar ligands of L-carnitine(L-CN)and sulfamide,which reorganized primary cations solvation sheath in a manner of forming Zn[(L-CN)(SA)(H_(2)O)_(4)]^(2+)configuration and dynamically restricting desolvated H2O molecules,thus ensuring a broadened electrochemical window of 2.9 V coupled with high ionic conductivity.Noticeably,L-CN affords an electrostatic shielding effect and an in situ construction of organic-inorganic interphase,endowing oriented Zn anode plating/stripping reversibly for over 2400 h.Therefore,with the synergy of electro/nucleophilicity and exceptional compatibility,the ZTE electrolyte dynamically boosts the conversion redox of Zn-Br_(2)batteries in terms of high specific capacity and stable cycling performance.These findings open a window for designing electrolytes with synergetic chemical stability and compatibility toward advanced zinc-ion batteries.展开更多
Flexible transparent antennas(FTAs)are widely used in wireless transmission fields,and their technological iterations are accelerating.However,the high losses caused by materials and structures limit the development o...Flexible transparent antennas(FTAs)are widely used in wireless transmission fields,and their technological iterations are accelerating.However,the high losses caused by materials and structures limit the development of FTAs with both high light transmission and high gain,and the rapid iteration rate demands greater process flexibility,which makes it difficult for existing technologies to achieve both demands.Here,we design a novel shell-core structure composite metal mesh(CMM)FTA to achieve extremely low skin depth loss and ohmic loss using skin effect and report a novel hybrid additive manufacturing method based on electric field oriented deposition to achieve efficient and flexible manufacturing of the unique Ag/Cu core-shell structure CMM FTA.The typical sample has a light transmittance of 80%(including substrate)when the sheet resistance is 0.29Ω·sq^(-1),and has excellent bending and torsion resistance.The peak gain in the working band is as high as 5.22 dB,and the efficiency is 80%,which is close to the performance of the opaque Cu patch antenna.It also realizes smooth and stable real-time wireless transmission under bending and long-distance conditions.This method addresses the shortcomings of FTAs,namely their high cost,low manufacturing efficiency,and low performance,especially in the rapid iterative development of antennas.展开更多
The electrically assisted(EA)deformation process has received considerable attention in recent years,ac-companied by research on current-induced deformation mechanisms.However,there are still challenges in eliminating...The electrically assisted(EA)deformation process has received considerable attention in recent years,ac-companied by research on current-induced deformation mechanisms.However,there are still challenges in eliminating thermal effects,which have prevented a comprehensive understanding of the underlying current-induced mechanisms.Opting for a single crystal(SC)in research provides advantages in decou-pling the nonthermal effect of electric current at smaller scales and eliminating the complex interactions that exist in polycrystalline materials.Therefore,the innovation of this work lies in decoupling the non-thermal effect of electric current and conducting a comprehensive analysis of anisotropic deformation and mechanisms within a Ni-based SC with different crystallographic axes and various current directions dur-ing electrically assisted tensile simulation.A significant tension axis direction in the SC during EA tension was induced by the combination of a higher current direction factor(|cosθ|)and a dimensionless factor for the current density(|J^(α)/J_(0)^(α)|)along the[100]axis.The stress drop within the SC due to the nonthermal effect of electric current generally increased with increasing current direction.This was attributed to the increased dislocation density differences and decreased temperature.The increased stress anisotropy of the SC at a current direction of 45°was attributed to fewer activated(111)slip systems and the pinning effect of more dislocations within these systems.This study advances our understanding of the thermal and nonthermal effects of electric current and offers valuable insights for the informed application of EA deformations in industrial and aerospace settings with SC superalloys.展开更多
Rechargeable magnesium batteries(RMBs)are considered promising candidates for next-generation energy storage systems due to their high theoretical capacity.However,the non-uniform deposition/stripping behavior of Mg m...Rechargeable magnesium batteries(RMBs)are considered promising candidates for next-generation energy storage systems due to their high theoretical capacity.However,the non-uniform deposition/stripping behavior of Mg metal hinders the practical application of RMBs.This study demonstrates that the designed interfacial electric field effect,driven by a copper phthalocyanine(CuPc)conductive interlayer,enhances the kinetics and stability of the Mg anode.In situ electrochemical impedance spectroscopy coupled with distribution of relaxation times analysis reveals that the highly delocalized electron cloud network of CuPc establishes a low-energy-barrier electron transport pathway,significantly reducing charge transfer resistance.Electrochemical characterization and density functional theory calculations indicate that the interfacial electric field effect effectively improves interfacial Mg^(2+)diffusion by enhancing electron delocalization and reducing the Mg^(2+)migration energy barrier.Furthermore,finite element simulations substantiate that the interfacial electric field imparts uniform interfacial charge distribution and homogeneous Mg deposition during plating/stripping processes.Consequently,the symmetric cell with CuPc@Mg achieves an ultra-long lifetime(1,400h at 5mAcm^(−2))and a high Coulombic efficiency(99.3%).Furthermore,the CuPc@Mg||Mo6S8 cell achieves high capacity retention(92%).This work highlights the potential of metal phthalocyanines in stabilizing Mg anodes.展开更多
Microstructure, electrical conductivity, and electromagnetic interference(EMI) shielding effectiveness(SE) of cast Mg-x Zn-y Y(x = 2–5, y = 1–10) alloys were systematically investigated to understand the effects of ...Microstructure, electrical conductivity, and electromagnetic interference(EMI) shielding effectiveness(SE) of cast Mg-x Zn-y Y(x = 2–5, y = 1–10) alloys were systematically investigated to understand the effects of Zn and Y additions on electrical conductivity and electromagnetic shielding effectiveness of the alloys.Experimental results indicate that the electrical conductivity and SE of the Mg-x Zn-y Y alloys decrease with Y/Zn ratio. Electrical conductivity is the main factor that affects the electromagnetic shielding properties and the variation tendency of electromagnetic shielding properties of the Mg-x Zn-y Y alloys is consistent with conductivity. Valence of Y and Zn atoms, configuration of extranuclear electron and volumetric difference are main reasons for the variations in the electrical conductivity. A high density of second phase and the formation of semi-continuous network structure can also improve the SE value at high frequencies.展开更多
AIM To observe the effect of octreotide (OT) and somatostatin (SS) on gallbladder pressure and myoelectric activity of SO in rabbits. METHODS Male rabbits fasted for 15h - 18h and anesthetized with urethane. ...AIM To observe the effect of octreotide (OT) and somatostatin (SS) on gallbladder pressure and myoelectric activity of SO in rabbits. METHODS Male rabbits fasted for 15h - 18h and anesthetized with urethane. The mean gallbladder pressure (GP) and myoelectric activity of SO were simultaneously measured with a frog bladder connected to a transducer and a pair of copper electrodes. RESULTS After injection of OT (10μg/kg, iv), the GP decreased in 2min and reached the lowest value in about 60min ( P <0 01, n =19), and completely or partially returned to the normal level in 120min. The frequency of myoelectric activity of SO was reduced, even disappeared in 2min ( P <0 01, n =19) and returned to normal in about 20min . Injection of SS (10μg/kg, iv) also decreased GP and myoelectric activity of SO ( P <0 01, n =7); Before and after injection of OT or SS, injection of CCK 8 ( 100ng or 200ng ) caused similar increase in myoelectric activity of SO and GP ( P >0 05). Before and after injection of OT, there were no significant differences in increases of myoelectric activity of SO and GP caused by electric stimulation of dorsal motor nucleus of vagus ( P >0 05). CONCLUSION OT and SS decreased GP and myoelectric activity of SO, demonstrating that effects of OT were similar to those of SS. Intravenous injection of OT did not affect the increase of myoelectric activity of SO and GP caused by CCK 8 or electric stimulation of dorsal motor nucleus of vagus.展开更多
The present article provides supplementary information of previous works of analytic models for predicting conductivity enhancements of carbon nanotube composites. The models, though fairly simple, are able to take ac...The present article provides supplementary information of previous works of analytic models for predicting conductivity enhancements of carbon nanotube composites. The models, though fairly simple, are able to take account of the effects of conductivity anisotropy, nonstraightness, and aspect ratio of the CNT additives on the conductivity enhancement of the composite and to give predictions agreeing well with existing experimental data. The omitted detailed derivation of this model is demonstrated in the present article with a more systematical analysis, which may help with further development in this direction. Furthermore, the effects of various orientation distributions of CNTs are reported here for the first time. The information may be useful in design or fabrication technology of CNT composites for better or specified conductivities.展开更多
The effect of an electric field E on a narrow quantum ring that contains two electrons and is threaded by a magnetic flux B has been investigated. Localization of the electronic distribution and suppression of the Aha...The effect of an electric field E on a narrow quantum ring that contains two electrons and is threaded by a magnetic flux B has been investigated. Localization of the electronic distribution and suppression of the AharonovBohm oscillation （ABO） are found in the two-electron ring, which are similar to those found in a one-electron ring. However, the period of ABO in a two-electron ring is reduced by half compared with that in a one-electron ring. Furthermore, during the variation of B, the persistent current of the ground state may undergo a sudden change in sign. This change is associated with a singlet-triplet transition and has no counterpart in one-electron rings. For a given E, there exists a threshold of energy. When the energy of the excited state exceeds the threshold, the localization would disappear and the ABO would recover. The value of the threshold is proportional to the magnitude of E. Once the threshold is exceeded, the persistent current is much stronger than the current of the ground state at E=0.展开更多
As an important component of nanodevices and nanomachine constructions, the mechanical performance of nanowires （NWs） has been a subject of intense research efforts due to gaining relevance in controlling functional...As an important component of nanodevices and nanomachine constructions, the mechanical performance of nanowires （NWs） has been a subject of intense research efforts due to gaining relevance in controlling functionality of nanoelectromechanical systems （NEMS）; meanwhile, one of the characteristics of the NEMS is the dependence of the functionality of the systems upon the applied electric field. The study of the electric effects on the Young＇s modulus of nanostructures is of certain usefulness in the design of NEMS and the precise measurement of mechanical properties of one-dimensional nanostructures. This paper reviews the origin of the size-dependence of the elastic property of NWs and the factors influencing the discrepancies and inconsistencies in the measured values of the Young＇s modulus for the NW, besides the surface effects, nonlinear effects, the electromechanical coupling effects as a possible effect responsible for the differences in quantitative and qualitative performance of the measured Young＇s modulus for the NWs versus the diameter are clarified.展开更多
Lattice effect on magnetic and electrical transport properties of Ln2/3Pb1/3MnO3 （Ln=La, Pr, Nd） films prepared by RF magnetron sputtering technique were investigated. With the decrease of the average ions radius ...Lattice effect on magnetic and electrical transport properties of Ln2/3Pb1/3MnO3 （Ln=La, Pr, Nd） films prepared by RF magnetron sputtering technique were investigated. With the decrease of the average ions radius 〈rA〉, the structure of Ln2/3Pb1/3MnO3 （Ln=La, Pr, Nd） targets transit from the rhombohedral phase to the orthorhombic phase, and the Curie temperature reduces rapidly with the decrease of 〈rA〉. The electrical properties show that films are the metallic state which can be fitted to the formula： ρ（T）=ρ0 ＋ ρ1T^2 ＋ ρ2T^4.5 at low temperatures. The temperature range of the ferromagnetic metallic state becomes narrow with the decrease of 〈rA〉. The phenomenon can be explained by the lattice effect.展开更多
Noncollinear antiferromagnetic Mn_(3)Sn films have received much attention due to their potential applications in antiferromagnetic spintronic devices. In this work, single-phase polycrystalline antiferromagnetic Mn_(...Noncollinear antiferromagnetic Mn_(3)Sn films have received much attention due to their potential applications in antiferromagnetic spintronic devices. In this work, single-phase polycrystalline antiferromagnetic Mn_(3)Sn thin films were successfully prepared by magnetron sputtering. The defects in the thin films were regulated by adjusting the sputtering power. The relationship among the films structure, the anomalous Hall effect(AHE) and the defects was investigated. High defect concentration in the Mn_(3)Sn films led to large room temperature ferromagnetic moments. The maximum saturation magnetization reached up to ~16 k A·m^(-1)(36 mlB/Mn), which was much larger than the values reported in literatures. The coercive field of38 mT was obtained in a high-quality Mn_(3)Sn film, which effectively reduced the flipping magnetic field. Moreover,the anomalous Hall resistance and coercive field of the Mn_(3)Sn films prepared on the ferroelectric substrates were manipulated through an applied electric field, indicating that the piezoelectric stress has a great influence on the nonzero Berry curvature of the triangular spin structure in the antiferromagnetic materials. These results will promote the potential application of Mn_(3)Sn in high-density and lowpower antiferromagnetic spintronic devices.展开更多
The traditional ground direct current method is not suitable for leakage detection of underground diaphragm walls in foundation pits because of its low accuracy and poor anti-noise ability.Here,we propose a joint surf...The traditional ground direct current method is not suitable for leakage detection of underground diaphragm walls in foundation pits because of its low accuracy and poor anti-noise ability.Here,we propose a joint surface-borehole observation device for leakage electric fi eld detection to achieve rapid measurement of the electric fi eld distribution characteristics at ground level in the foundation pit,thus enabling rapid localization of leakage points.We first establish the mechanism and basic equation of the leakage electric field response by combining the electric field formed by electrokinetic effect(EK)and the stable electric fi eld formed by conduction current in a combined leakage channel.Then,the fi nite–infi nite element coupling method is used to solve the electric fi eld equation to simulate the responses of a three-dimensional foundation pit leakage model.Furthermore,we conduct numerical simulations of diff erent pit models to investigate the infl uencing factors of the detection device and response characteristics of the change in the properties of the leakage channel.The results demonstrate that the proposed joint surface-borehole observation device can effi ciently reveal anomalous potential caused by leakage,and the amplitude of the electric fi eld generated by EK can eff ectively strengthen the leakage electric fi eld signal at the leakage,thus improving detection accuracy and effi ciency.展开更多
The disinfection of waterborne pathogens from drinking water is extremely important for human health.Although countless efforts have been devoted for drinking water inactivation,challenges still exist in terms of rela...The disinfection of waterborne pathogens from drinking water is extremely important for human health.Although countless efforts have been devoted for drinking water inactivation,challenges still exist in terms of relative high energy consumption and complicated to implement and maintain.Here,silver nanoparticles anchoring wood carbon(Ag NPs/WC)membrane is developed as cost-effective,high flux,scalable filter for highly efficient electric field disinfection of water.Under electric field of 4 V voltage,the designed membrane achieved more than 5 log(99.999%)disinfection performance for different model bacteria,including Escherichia coli(E.coli),Enterococcus faecalis(E.faecalis),Salmonella enterica serovar Typhimirium(S.Typhimurium)and Bacillus subtilis(B.subtilis)with a high flux of 3.8 x 103 L m^(-2)h^(-1),extremely low energy consumption of 2 J L^(-1)m^(-2)and fantastic durability(7 days).The high disinfection performance of Ag NPs/WC membrane is attributed to the synergistic disinfection of carbon nanofibrils,Ag nanoparticles as well as the low tortuous structure of the channels in wood carbon.The Ag NPs/WC membrane presents a promising strategy for point-of-use drinking water electric field disinfection treatment.展开更多
Electrical discharge machining（EDM） is a promising non-traditional micro machining technology that offers a vast array of applications in the manufacturing industry. However, scale effects occur when machining at th...Electrical discharge machining（EDM） is a promising non-traditional micro machining technology that offers a vast array of applications in the manufacturing industry. However, scale effects occur when machining at the micro-scale, which can make it difficult to predict and optimize the machining performances of micro EDM. A new concept of ＂scale effects＂ in micro EDM is proposed, the scale effects can reveal the difference in machining performances between micro EDM and conventional macro EDM. Similarity theory is presented to evaluate the scale effects in micro EDM. Single factor experiments are conducted and the experimental results are analyzed by discussing the similarity difference and similarity precision. The results show that the output results of scale effects in micro EDM do not change linearly with discharge parameters. The values of similarity precision of machining time significantly increase when scaling-down the capacitance or open-circuit voltage. It is indicated that the lower the scale of the discharge parameter, the greater the deviation of non-geometrical similarity degree over geometrical similarity degree, which means that the micro EDM system with lower discharge energy experiences more scale effects. The largest similarity difference is 5.34 while the largest similarity precision can be as high as 114.03. It is suggested that the similarity precision is more effective in reflecting the scale effects and their fluctuation than similarity difference. Consequently, similarity theory is suitable for evaluating the scale effects in micro EDM. This proposed research offers engineering values for optimizing the machining parameters and improving the machining performances of micro EDM.展开更多
In electron beam technology, one of the critical focuses of research and development efforts is on improving the measurement of electron beam parameters. The parameters are closely related to the generation, emission,...In electron beam technology, one of the critical focuses of research and development efforts is on improving the measurement of electron beam parameters. The parameters are closely related to the generation, emission, operation environment, and role of the electron beam and the corresponding medium. In this study, a field calculation method is proposed, and the electric field intensity distribution on the electron beam’s cross-section is analyzed. The characteristics of beam diffusion caused by the space charge effect are investigated in simulation, and the obtained data are compared with the experiment. The simulation demonstrated that the cross-sectional electric field distribution is primarily affected by the electron beam current, current density distribution, and electron beam propagation speed.展开更多
In this work, the effect of uniaxial strain on electronic and thermoelectric properties of magnesium silicide using density functional theory（DFT） and Boltzmann transport equations has been studied. We have found th...In this work, the effect of uniaxial strain on electronic and thermoelectric properties of magnesium silicide using density functional theory（DFT） and Boltzmann transport equations has been studied. We have found that the value of band gap increases with tensile strain and decreases with compressive strain. The variations of electrical conductivity,Seebeck coefficient, electronic thermal conductivity, and power factor with temperatures have been calculated. The Seebeck coefficient and power factor are observed to be modified strongly with strain. The value of power factor is found to be higher in comparison with the unstrained structure at 2% tensile strain. We have also calculated phonon dispersion, phonon density of states, specific heat at constant volume, and lattice thermal conductivity of material under uniaxial strain. The phonon properties and lattice thermal conductivity of Mg2Si under uniaxial strain have been explored first time in this report.展开更多
The La-dopping effect on the piezoelectricity in the K0.5Na0.5NbO3 （KNN） crystal with a tetragonal phase is investigated for the first time using the first-principle calculation based on density functional theory. T...The La-dopping effect on the piezoelectricity in the K0.5Na0.5NbO3 （KNN） crystal with a tetragonal phase is investigated for the first time using the first-principle calculation based on density functional theory. The full potentiallinearized augumented plane wave plus local orbitals （APW-LO） method and the supercell method are used in the calculation for the KNN crystal with and without the La doping. The results show that the piezoelectricity originates from the strong hybridization between the Nb atom and the O atom, and the substitution of the K or Na atom by the La impurity atom introduces the anisotropic relaxation and enhances the piezoelectricity at first and then restrains the hybridization of the Nb-O atoms when the La doping content further increases.展开更多
基金support of the National Natural Science Foundation of China(Grant Nos.52192611,51872031,61904013,and 62405157)China Postdoctoral Science Foundation(Nos.2023M741890 and GZC20231215)the Fundamental Research Funds for the Central Universities.
文摘The flexoelectric effect refers to the electromechanical coupling between electric polarization and mechanical strain gradient.It universally exists in a variety of materials in any space group,such as liquid crystals,dielectrics,biological materials,and semiconductors.Because of its unique size effect,nanoscale flexoelectricity has shown novel phenomena and promising applications in electronics,optronics,mechatronics,and photovoltaics.In this review,we provide a succinct report on the discovery and development of the flexoelectric effect,focusing on flexoelectric materials and related applications.Finally,we discuss recent flexoelectric research progress and still‐unsolved problems.
基金financially supported by the National Natural Science Foundation of China(51977097).
文摘Solvated zinc ions are prone to undergo desolvation at the electrode/electrolyte interfaces,and unstable H_(2)O molecules within the solvated sheaths tend to trigger hydrogen evolution reaction(HER),further accelerating interfaces decay.Herein,we propose for the first time a novel strategy to enhance the interfacial stabilities by insitu dynamic reconstruction of weakly solvated Zn2þduring the desolvation processes at heterointerfaces.Theoretical calculations indicate that,due to built-in electric field effects(BEFs),the plating/stripping mechanism shifts from[Zn(H_(2)O)_(6)]_(2)þto[Zn(H_(2)O)_(5)(SO_(4))^(2-)]_(2)þwithout additional electrolyte additives,reducing the solvation ability of H_(2)O,enhancing the competitive coordination of SO_(4)^(2-),essentially eliminating the undesirable side effects of anodes.Hence,symmetric cells can operate stably for 3000 h(51.7-times increase in cycle life),and the full cells can operate stably for 5000 cycles(51.5-times increase in cycle life).This study provides valuable insights into the critical design of weakly solvated Zn^(2+) þand desolvation processes at heterointerfaces.
基金Supported by National Key Research and Development Program of China(No.2023YFC3707901)。
文摘Evaluation of backfilling effectiveness plays a crucial role in the geological environment management and restoration of abandoned open-pit quarries,providing a scientific basis for subsequent greening efforts.Backfill soil,predominantly composed of silty clay,demonstrates high water retention capacity and elevated moisture content,leading to a pronounced resistivity contrast with the bedrock exposed by quarrying activities.To investigate the distribution of backfill soil subsurface and assess backfilling effectiveness in the study area,this study conducted a comprehensive geophysical investigation utilizing the high-density electrical resistivity tomography(ERT).A total of 19 ERT survey lines were deployed across three distinct areas in Liuyao Village,Huaibei City,Anhui Province,China.The inversion results,derived from both two-dimensional(2D)and three-dimensional(3D),reveal distinct electrical properties of the subsurface materials:the backfill soil layer shows low resistivity features,the fill stone layer exhibits medium to high resistivity,and the bedrock shows the highest resistivity.The 2D inversion results,from the data measured using the Wenner array effectively capture the spatial distribution and structural features of the backfill soil layer.The findings indicate a gradual east-west thinning of the clay layer within the quarry.Furthermore,the northern pit area exhibits a uniform distribution of backfill soil layer,indicative of effective backfilling operations.In contrast,the southern pit area lacks a well-defined clay layer,suggesting suboptimal backfilling effectiveness.
基金provided by the National Natural Science Foundation of China(Grant No.52373208 and 61831021)the ECNU Academic Innovation Promotion Program for Excellent Doctoral Students(YBNLTS2024-021).
文摘The coupling of fast redox kinetics,high-energy density,and prolonged lifespan is a permanent aspiration for aqueous rechargeable zinc batteries,but which has been severely hampered by a narrow voltage range and suboptimal compatibility between the electrolytes and electrodes.Here,we unprecedentedly introduced an electric ambipolar effect for synergistic manipulation on Zn^(2+)ternary-hydrated eutectic electrolyte(ZTE)enabling high-performance Zn-Br_(2)batteries.The electric ambipolar effect motivates strong dipole interactions among hydrated perchlorates and bipolar ligands of L-carnitine(L-CN)and sulfamide,which reorganized primary cations solvation sheath in a manner of forming Zn[(L-CN)(SA)(H_(2)O)_(4)]^(2+)configuration and dynamically restricting desolvated H2O molecules,thus ensuring a broadened electrochemical window of 2.9 V coupled with high ionic conductivity.Noticeably,L-CN affords an electrostatic shielding effect and an in situ construction of organic-inorganic interphase,endowing oriented Zn anode plating/stripping reversibly for over 2400 h.Therefore,with the synergy of electro/nucleophilicity and exceptional compatibility,the ZTE electrolyte dynamically boosts the conversion redox of Zn-Br_(2)batteries in terms of high specific capacity and stable cycling performance.These findings open a window for designing electrolytes with synergetic chemical stability and compatibility toward advanced zinc-ion batteries.
基金supported by the National Natural Science Foundation of China(Grant Nos.52375348 and 52175331)the Natural Science Foundation of Shandong Province,China(Grant Nos.ZR2020ZD04 and ZR2022ME014).
文摘Flexible transparent antennas(FTAs)are widely used in wireless transmission fields,and their technological iterations are accelerating.However,the high losses caused by materials and structures limit the development of FTAs with both high light transmission and high gain,and the rapid iteration rate demands greater process flexibility,which makes it difficult for existing technologies to achieve both demands.Here,we design a novel shell-core structure composite metal mesh(CMM)FTA to achieve extremely low skin depth loss and ohmic loss using skin effect and report a novel hybrid additive manufacturing method based on electric field oriented deposition to achieve efficient and flexible manufacturing of the unique Ag/Cu core-shell structure CMM FTA.The typical sample has a light transmittance of 80%(including substrate)when the sheet resistance is 0.29Ω·sq^(-1),and has excellent bending and torsion resistance.The peak gain in the working band is as high as 5.22 dB,and the efficiency is 80%,which is close to the performance of the opaque Cu patch antenna.It also realizes smooth and stable real-time wireless transmission under bending and long-distance conditions.This method addresses the shortcomings of FTAs,namely their high cost,low manufacturing efficiency,and low performance,especially in the rapid iterative development of antennas.
基金National Science Fund for Distinguished Young Scholars(No.52225505)the National Sci-ence and Technology Major Project(No.J2019-VII-0014-0154)+1 种基金the National Natural Science Foundation of China(No.52005412)the Tianjin Natural Science Foundation of China-Multi-input key projects(No.22JCZDJC00650)for financial supports given to this research.
文摘The electrically assisted(EA)deformation process has received considerable attention in recent years,ac-companied by research on current-induced deformation mechanisms.However,there are still challenges in eliminating thermal effects,which have prevented a comprehensive understanding of the underlying current-induced mechanisms.Opting for a single crystal(SC)in research provides advantages in decou-pling the nonthermal effect of electric current at smaller scales and eliminating the complex interactions that exist in polycrystalline materials.Therefore,the innovation of this work lies in decoupling the non-thermal effect of electric current and conducting a comprehensive analysis of anisotropic deformation and mechanisms within a Ni-based SC with different crystallographic axes and various current directions dur-ing electrically assisted tensile simulation.A significant tension axis direction in the SC during EA tension was induced by the combination of a higher current direction factor(|cosθ|)and a dimensionless factor for the current density(|J^(α)/J_(0)^(α)|)along the[100]axis.The stress drop within the SC due to the nonthermal effect of electric current generally increased with increasing current direction.This was attributed to the increased dislocation density differences and decreased temperature.The increased stress anisotropy of the SC at a current direction of 45°was attributed to fewer activated(111)slip systems and the pinning effect of more dislocations within these systems.This study advances our understanding of the thermal and nonthermal effects of electric current and offers valuable insights for the informed application of EA deformations in industrial and aerospace settings with SC superalloys.
基金financially supported by the National Natural Science Foundation of China(52274295)Hebei Province Science and Technology Research and Development Platform Special Innovation Capability Enhancement Plan Project(24464402D)+3 种基金the Fundamental Research Funds for the Central Universities(N2423051,N2423005)the Science and Technology Project of Hebei Education Department(QN2024238)The Basic Research Program Project of Shijiazhuang City for Universities Stationed in Hebei Province(241790937A)2025 Hebei Provincial Post-graduate Student Innovation Ability Training Funding Project(CXZZBS2025202,CXZZSS2025157).
文摘Rechargeable magnesium batteries(RMBs)are considered promising candidates for next-generation energy storage systems due to their high theoretical capacity.However,the non-uniform deposition/stripping behavior of Mg metal hinders the practical application of RMBs.This study demonstrates that the designed interfacial electric field effect,driven by a copper phthalocyanine(CuPc)conductive interlayer,enhances the kinetics and stability of the Mg anode.In situ electrochemical impedance spectroscopy coupled with distribution of relaxation times analysis reveals that the highly delocalized electron cloud network of CuPc establishes a low-energy-barrier electron transport pathway,significantly reducing charge transfer resistance.Electrochemical characterization and density functional theory calculations indicate that the interfacial electric field effect effectively improves interfacial Mg^(2+)diffusion by enhancing electron delocalization and reducing the Mg^(2+)migration energy barrier.Furthermore,finite element simulations substantiate that the interfacial electric field imparts uniform interfacial charge distribution and homogeneous Mg deposition during plating/stripping processes.Consequently,the symmetric cell with CuPc@Mg achieves an ultra-long lifetime(1,400h at 5mAcm^(−2))and a high Coulombic efficiency(99.3%).Furthermore,the CuPc@Mg||Mo6S8 cell achieves high capacity retention(92%).This work highlights the potential of metal phthalocyanines in stabilizing Mg anodes.
基金the National Key R&D Program of China(2016YFB0301100)the National Natural Science Foundation of China(51571043 and 51531002)+1 种基金the Fundamental Research Funds for the Central Universities(2018CDJDCL0019and cqu2018CDHB1A08)Chongqing Technology Innovation and Application Demonstration(Social and Livelihood)Project(cstc2018jscx-msybX0090)
文摘Microstructure, electrical conductivity, and electromagnetic interference(EMI) shielding effectiveness(SE) of cast Mg-x Zn-y Y(x = 2–5, y = 1–10) alloys were systematically investigated to understand the effects of Zn and Y additions on electrical conductivity and electromagnetic shielding effectiveness of the alloys.Experimental results indicate that the electrical conductivity and SE of the Mg-x Zn-y Y alloys decrease with Y/Zn ratio. Electrical conductivity is the main factor that affects the electromagnetic shielding properties and the variation tendency of electromagnetic shielding properties of the Mg-x Zn-y Y alloys is consistent with conductivity. Valence of Y and Zn atoms, configuration of extranuclear electron and volumetric difference are main reasons for the variations in the electrical conductivity. A high density of second phase and the formation of semi-continuous network structure can also improve the SE value at high frequencies.
文摘AIM To observe the effect of octreotide (OT) and somatostatin (SS) on gallbladder pressure and myoelectric activity of SO in rabbits. METHODS Male rabbits fasted for 15h - 18h and anesthetized with urethane. The mean gallbladder pressure (GP) and myoelectric activity of SO were simultaneously measured with a frog bladder connected to a transducer and a pair of copper electrodes. RESULTS After injection of OT (10μg/kg, iv), the GP decreased in 2min and reached the lowest value in about 60min ( P <0 01, n =19), and completely or partially returned to the normal level in 120min. The frequency of myoelectric activity of SO was reduced, even disappeared in 2min ( P <0 01, n =19) and returned to normal in about 20min . Injection of SS (10μg/kg, iv) also decreased GP and myoelectric activity of SO ( P <0 01, n =7); Before and after injection of OT or SS, injection of CCK 8 ( 100ng or 200ng ) caused similar increase in myoelectric activity of SO and GP ( P >0 05). Before and after injection of OT, there were no significant differences in increases of myoelectric activity of SO and GP caused by electric stimulation of dorsal motor nucleus of vagus ( P >0 05). CONCLUSION OT and SS decreased GP and myoelectric activity of SO, demonstrating that effects of OT were similar to those of SS. Intravenous injection of OT did not affect the increase of myoelectric activity of SO and GP caused by CCK 8 or electric stimulation of dorsal motor nucleus of vagus.
文摘The present article provides supplementary information of previous works of analytic models for predicting conductivity enhancements of carbon nanotube composites. The models, though fairly simple, are able to take account of the effects of conductivity anisotropy, nonstraightness, and aspect ratio of the CNT additives on the conductivity enhancement of the composite and to give predictions agreeing well with existing experimental data. The omitted detailed derivation of this model is demonstrated in the present article with a more systematical analysis, which may help with further development in this direction. Furthermore, the effects of various orientation distributions of CNTs are reported here for the first time. The information may be useful in design or fabrication technology of CNT composites for better or specified conductivities.
基金Project supported by the National Natural Science Foundation of China （Grant No 10574163）, the Center of Theoretical Nuclear Physics, National Laboratory of Heavy Ion Collisions, Lanzhou, China.
文摘The effect of an electric field E on a narrow quantum ring that contains two electrons and is threaded by a magnetic flux B has been investigated. Localization of the electronic distribution and suppression of the AharonovBohm oscillation （ABO） are found in the two-electron ring, which are similar to those found in a one-electron ring. However, the period of ABO in a two-electron ring is reduced by half compared with that in a one-electron ring. Furthermore, during the variation of B, the persistent current of the ground state may undergo a sudden change in sign. This change is associated with a singlet-triplet transition and has no counterpart in one-electron rings. For a given E, there exists a threshold of energy. When the energy of the excited state exceeds the threshold, the localization would disappear and the ABO would recover. The value of the threshold is proportional to the magnitude of E. Once the threshold is exceeded, the persistent current is much stronger than the current of the ground state at E=0.
基金supported by the National Basic Research Program of China (No2007CB607506)the NSFC's program(No90405005)+1 种基金the PhD Fund (No20050730016)the Fund of the State Key Laboratory of Advanced Technology for Materials Synthesis and Processing(Wuhan University of Technology)(NoWUT2005Z04)
文摘As an important component of nanodevices and nanomachine constructions, the mechanical performance of nanowires （NWs） has been a subject of intense research efforts due to gaining relevance in controlling functionality of nanoelectromechanical systems （NEMS）; meanwhile, one of the characteristics of the NEMS is the dependence of the functionality of the systems upon the applied electric field. The study of the electric effects on the Young＇s modulus of nanostructures is of certain usefulness in the design of NEMS and the precise measurement of mechanical properties of one-dimensional nanostructures. This paper reviews the origin of the size-dependence of the elastic property of NWs and the factors influencing the discrepancies and inconsistencies in the measured values of the Young＇s modulus for the NW, besides the surface effects, nonlinear effects, the electromechanical coupling effects as a possible effect responsible for the differences in quantitative and qualitative performance of the measured Young＇s modulus for the NWs versus the diameter are clarified.
基金the National Natural Science Foundation of China under grant No.50572088Xi'an University of Science Technology Breeding Foundation No.200737.
文摘Lattice effect on magnetic and electrical transport properties of Ln2/3Pb1/3MnO3 （Ln=La, Pr, Nd） films prepared by RF magnetron sputtering technique were investigated. With the decrease of the average ions radius 〈rA〉, the structure of Ln2/3Pb1/3MnO3 （Ln=La, Pr, Nd） targets transit from the rhombohedral phase to the orthorhombic phase, and the Curie temperature reduces rapidly with the decrease of 〈rA〉. The electrical properties show that films are the metallic state which can be fitted to the formula： ρ（T）=ρ0 ＋ ρ1T^2 ＋ ρ2T^4.5 at low temperatures. The temperature range of the ferromagnetic metallic state becomes narrow with the decrease of 〈rA〉. The phenomenon can be explained by the lattice effect.
基金financially supported by the Key Research and Development Program of Shanxi Province(No.201803D421046)the Natural Science Foundation of Shanxi Province(No.201901D111267)。
文摘Noncollinear antiferromagnetic Mn_(3)Sn films have received much attention due to their potential applications in antiferromagnetic spintronic devices. In this work, single-phase polycrystalline antiferromagnetic Mn_(3)Sn thin films were successfully prepared by magnetron sputtering. The defects in the thin films were regulated by adjusting the sputtering power. The relationship among the films structure, the anomalous Hall effect(AHE) and the defects was investigated. High defect concentration in the Mn_(3)Sn films led to large room temperature ferromagnetic moments. The maximum saturation magnetization reached up to ~16 k A·m^(-1)(36 mlB/Mn), which was much larger than the values reported in literatures. The coercive field of38 mT was obtained in a high-quality Mn_(3)Sn film, which effectively reduced the flipping magnetic field. Moreover,the anomalous Hall resistance and coercive field of the Mn_(3)Sn films prepared on the ferroelectric substrates were manipulated through an applied electric field, indicating that the piezoelectric stress has a great influence on the nonzero Berry curvature of the triangular spin structure in the antiferromagnetic materials. These results will promote the potential application of Mn_(3)Sn in high-density and lowpower antiferromagnetic spintronic devices.
基金partially supported by the National Natural Science Foundation of China (Nos. 41864004 and 41674077)Jiangxi Provincial Academic Leaders (Youth) Training Program (No. 20204BCJL23058)Open Fund from Engineering Research Center for Seismic Disaster Prevention and Engineering Geological Disaster Detection of Jiangxi Province (SDGD202102)。
文摘The traditional ground direct current method is not suitable for leakage detection of underground diaphragm walls in foundation pits because of its low accuracy and poor anti-noise ability.Here,we propose a joint surface-borehole observation device for leakage electric fi eld detection to achieve rapid measurement of the electric fi eld distribution characteristics at ground level in the foundation pit,thus enabling rapid localization of leakage points.We first establish the mechanism and basic equation of the leakage electric field response by combining the electric field formed by electrokinetic effect(EK)and the stable electric fi eld formed by conduction current in a combined leakage channel.Then,the fi nite–infi nite element coupling method is used to solve the electric fi eld equation to simulate the responses of a three-dimensional foundation pit leakage model.Furthermore,we conduct numerical simulations of diff erent pit models to investigate the infl uencing factors of the detection device and response characteristics of the change in the properties of the leakage channel.The results demonstrate that the proposed joint surface-borehole observation device can effi ciently reveal anomalous potential caused by leakage,and the amplitude of the electric fi eld generated by EK can eff ectively strengthen the leakage electric fi eld signal at the leakage,thus improving detection accuracy and effi ciency.
基金supported by the National Natural Science Foundation of China(No.21876072)the Talent Innovation and Entrepreneurship Project of Lanzhou(No.2018-RC-04)+1 种基金Special Fund Project for the Central Government to Guide Local Science and Technology Development(2020)the 111 Project(No.B20027)。
文摘The disinfection of waterborne pathogens from drinking water is extremely important for human health.Although countless efforts have been devoted for drinking water inactivation,challenges still exist in terms of relative high energy consumption and complicated to implement and maintain.Here,silver nanoparticles anchoring wood carbon(Ag NPs/WC)membrane is developed as cost-effective,high flux,scalable filter for highly efficient electric field disinfection of water.Under electric field of 4 V voltage,the designed membrane achieved more than 5 log(99.999%)disinfection performance for different model bacteria,including Escherichia coli(E.coli),Enterococcus faecalis(E.faecalis),Salmonella enterica serovar Typhimirium(S.Typhimurium)and Bacillus subtilis(B.subtilis)with a high flux of 3.8 x 103 L m^(-2)h^(-1),extremely low energy consumption of 2 J L^(-1)m^(-2)and fantastic durability(7 days).The high disinfection performance of Ag NPs/WC membrane is attributed to the synergistic disinfection of carbon nanofibrils,Ag nanoparticles as well as the low tortuous structure of the channels in wood carbon.The Ag NPs/WC membrane presents a promising strategy for point-of-use drinking water electric field disinfection treatment.
基金Supported by National Natural Science Foundation of China(Grant No.51375274)China Postdoctoral Science Foundation(Grant No.2014M561920)
文摘Electrical discharge machining（EDM） is a promising non-traditional micro machining technology that offers a vast array of applications in the manufacturing industry. However, scale effects occur when machining at the micro-scale, which can make it difficult to predict and optimize the machining performances of micro EDM. A new concept of ＂scale effects＂ in micro EDM is proposed, the scale effects can reveal the difference in machining performances between micro EDM and conventional macro EDM. Similarity theory is presented to evaluate the scale effects in micro EDM. Single factor experiments are conducted and the experimental results are analyzed by discussing the similarity difference and similarity precision. The results show that the output results of scale effects in micro EDM do not change linearly with discharge parameters. The values of similarity precision of machining time significantly increase when scaling-down the capacitance or open-circuit voltage. It is indicated that the lower the scale of the discharge parameter, the greater the deviation of non-geometrical similarity degree over geometrical similarity degree, which means that the micro EDM system with lower discharge energy experiences more scale effects. The largest similarity difference is 5.34 while the largest similarity precision can be as high as 114.03. It is suggested that the similarity precision is more effective in reflecting the scale effects and their fluctuation than similarity difference. Consequently, similarity theory is suitable for evaluating the scale effects in micro EDM. This proposed research offers engineering values for optimizing the machining parameters and improving the machining performances of micro EDM.
基金Project supported by CAST Innovation Fund (Grant No.CAST-BISEE2019-040)。
文摘In electron beam technology, one of the critical focuses of research and development efforts is on improving the measurement of electron beam parameters. The parameters are closely related to the generation, emission, operation environment, and role of the electron beam and the corresponding medium. In this study, a field calculation method is proposed, and the electric field intensity distribution on the electron beam’s cross-section is analyzed. The characteristics of beam diffusion caused by the space charge effect are investigated in simulation, and the obtained data are compared with the experiment. The simulation demonstrated that the cross-sectional electric field distribution is primarily affected by the electron beam current, current density distribution, and electron beam propagation speed.
基金Council of Scientific&Industrial Research(CSIR),India for providing fellowship.
文摘In this work, the effect of uniaxial strain on electronic and thermoelectric properties of magnesium silicide using density functional theory（DFT） and Boltzmann transport equations has been studied. We have found that the value of band gap increases with tensile strain and decreases with compressive strain. The variations of electrical conductivity,Seebeck coefficient, electronic thermal conductivity, and power factor with temperatures have been calculated. The Seebeck coefficient and power factor are observed to be modified strongly with strain. The value of power factor is found to be higher in comparison with the unstrained structure at 2% tensile strain. We have also calculated phonon dispersion, phonon density of states, specific heat at constant volume, and lattice thermal conductivity of material under uniaxial strain. The phonon properties and lattice thermal conductivity of Mg2Si under uniaxial strain have been explored first time in this report.
基金supported by National Nature Science Foundation of China (No.11075110)
文摘The La-dopping effect on the piezoelectricity in the K0.5Na0.5NbO3 （KNN） crystal with a tetragonal phase is investigated for the first time using the first-principle calculation based on density functional theory. The full potentiallinearized augumented plane wave plus local orbitals （APW-LO） method and the supercell method are used in the calculation for the KNN crystal with and without the La doping. The results show that the piezoelectricity originates from the strong hybridization between the Nb atom and the O atom, and the substitution of the K or Na atom by the La impurity atom introduces the anisotropic relaxation and enhances the piezoelectricity at first and then restrains the hybridization of the Nb-O atoms when the La doping content further increases.
