Non-uniform deformation of the dielectric subjected to external forces can induce the flexoelectric effect, a phenomenon that couples electrical polarization to strain gradients. However, limited by the size effects, ...Non-uniform deformation of the dielectric subjected to external forces can induce the flexoelectric effect, a phenomenon that couples electrical polarization to strain gradients. However, limited by the size effects, flexoelectricity is not significant at the macroscale and only becomes catchable at the microscale and nanoscale. In recent work, we obtained a considerable flexoelectric-like response by crumpling the dielectric embedded with charges, i.e., the electret, which significantly improved the flexoelectric effect at the macroscale. In this work, we further optimize the macroscopic performance of the flexoelectric response by applying gradient treatment to the electret films. Specifically, we analytically derive the electromechanical coupling of crumpled electret films with gradients of different thicknesses, charge densities, and Young’s moduli as key design variables. It is shown that the gradient-oriented electret film can be tuned to nearly five times that of a uniform electret film.展开更多
In this work, the charge dynamics characteristics of injection, transport and decay in porous and non-porous polytetrafluoroethylene (PTFE) film electrets were investigated by means of corona charging, isothermal and ...In this work, the charge dynamics characteristics of injection, transport and decay in porous and non-porous polytetrafluoroethylene (PTFE) film electrets were investigated by means of corona charging, isothermal and thermal stimulating surface-potential decay measurements. The results showed that the initial surface potential, whether positively or negatively charging, is much higher in non-porous PTFE than in porous PTFE. For porous film the value of initial sur-face potentials increases with increase of film thickness. Higher charging temperature can remarkably improve charge stability. The charge dynamics are correlated to materials microstructure according to their scanning electron micrographs.For non-porous PTFE films, polarizability change of C-F bonds is the main origin of electret charges; but for porous PTFE film a large number of bulk and interface type traps are expected because of the greater area of interface and higher crys-tallinity.展开更多
The effect of heating treatment on the trap level distribution in polyamide 66 film electret is studied by thermally stimulated depolarization current （TSDC） technique. For annealed polyamide 66, there are three tra...The effect of heating treatment on the trap level distribution in polyamide 66 film electret is studied by thermally stimulated depolarization current （TSDC） technique. For annealed polyamide 66, there are three trap levels that respectively originate from space charge trapped in amorphous phase, interphase and crystalline phase. There is one peak that originates from space charge trapped in amorphous phase for quenched one. Using multi-point method to fit the experimental curves, the detrapping current peaks can be separated and the trap depth is obtained. The shallower trap levels trapped in amorphous phase and interphase are obviously close to the deeper trap level trapped in crystalline phase for annealed polyamide 66 as the polarization temperature increases, while the trap level distribution remains unaffected by polarization temperature for quenched one.展开更多
In the present study,the electret 5-fluorouracil patch was developed,the effective surface potential,piezoelectric coefficient d33,open-circuit thermally stimulated discharge（TSD） current spectra and shear adhesion ...In the present study,the electret 5-fluorouracil patch was developed,the effective surface potential,piezoelectric coefficient d33,open-circuit thermally stimulated discharge（TSD） current spectra and shear adhesion of the patch were measured.The drug release profile of the patch was determined by using high performance liquid chromatography method.A stable potential difference which was positively dependent on the surface potential of the electret was generated on two sides of the patch.The measurements of d33 coefficient,TSD current spectra and adhesion performance showed that the electrostatic field of the electret could cause polarization and cohesive strength decreasing of the matrix molecules,change the distribution and interaction of the drug molecules in patch,therefore to increase the release of drug from the transdermal patch.展开更多
More than 30 years ago,a group of researchers in Tampere-Finland developed a thin foamed polymeric material for capacitive sensors.Such soft-voided films exhibited electrical charging characteristics,forming a powerfu...More than 30 years ago,a group of researchers in Tampere-Finland developed a thin foamed polymeric material for capacitive sensors.Such soft-voided films exhibited electrical charging characteristics,forming a powerful combination,which resulted in a smart-material with ferroelectric properties.The discovery of the electro-thermo mechanical film(ETMF)has sparked the curiosity of the electret community,leading to the development of several studies.At that time,ETMF became known as cellular electrets and,later,as ferroelectrets or piezoelectrets regarding their electromechanical properties.This paper provides a timeline review of the research on ferroelectrets produced in Brazil,between the years 1990 and 2020,towards demonstrating how the interest in the electret electrical charging mechanism has resulted in the use of ferroelectrets with well-controlled cavities for ultrasound applications.展开更多
In this paper, performance of PECVD SiO 2 /Si 3 N 4 double layers electrets with different thicknesses were investigated detailedly in respect of chargeability, storage charge stability in high temperature and reliabi...In this paper, performance of PECVD SiO 2 /Si 3 N 4 double layers electrets with different thicknesses were investigated detailedly in respect of chargeability, storage charge stability in high temperature and reliability in high humidity environment. Samples with different thicknesses of Si 3 N 4 and SiO 2 were prepared on Pyrex 7740 glass substrates and characterized by isothermal and high humidity charge decay. The results of experiment approved that the PECVD SiO 2 /Si 3 N 4 double layers electrets on glass substrate has as good chargeability and charge stability in high temperature and high humidity environment as thermal oxidation or APCVD/LPCVD ones on silicon substrates. The experiment results indicated that a Si 3 N 4 layer no less than 50 nm is necessary for good charge stability in high temperature and a Si 3 N 4 layer thicker than 500 nm decreases the chargeability. Even a 2 nm Si 3 N 4 layer is enough to significantly improve the charge stability in high humidity environment. Thick SiO 2 layer can increase the surface potential of electrets under the same charging condition and its charge stability in high temperature. However, the electrets with high surface potential also exhibit poor uniformity of charge stability in high humidity environment.展开更多
Nowadays,the demand for advanced functional materials in transducer technology is growing rapidly.Piezoelectric materials transform mechanical variables(displacement or force)into electrical signals(charge or voltage)...Nowadays,the demand for advanced functional materials in transducer technology is growing rapidly.Piezoelectric materials transform mechanical variables(displacement or force)into electrical signals(charge or voltage)and vice versa.They are interesting from both fundamental and application points of view.Ferrooelectrets(also called piezoelectrets)are a relatively young group of piezo-,pyro-and ferroelectric materials.They exhibit ferroic behavior phenomenologically undistinguishable from that of traditional ferroelectrics,although the materials per se are essentially non-polar space-charge electrets with artificial macroscopic dipoles(i.e.,internally charged cavities).A lot of work has been done on ferroelectrets and their applications up to now.In this paper,we review and discuss mostly the work done at University of Potsdam on the research and development of ferroelectrets.We will,however,also mention important results from other teams,and prospect the challenges and future progress trend of the field of ferroelectret research.展开更多
1μm SiO2 layer was thermally grown on silicon wafer. Negative and positive charging of SiO2 layer was performed by means of corona method at room temperature. By controlling grid voltage, we have obtained uniformly c...1μm SiO2 layer was thermally grown on silicon wafer. Negative and positive charging of SiO2 layer was performed by means of corona method at room temperature. By controlling grid voltage, we have obtained uniformly charged SiO2 with surface potential from 500 to +200 V. With certain electric field, the electrostatic force between charged SiO2 is investigated. Experimental results indicate that attraction not only exists between charged SiO2 with different polarity, but also exists between charged SiO2 with the same polarity, and no repulsion has been observed. The attractive force is related to both surface potential difference of charged SiO2 and the uniformity of the electric field. Based on the experiment, the attractive force is supposed to be caused by polarization when two charged SiO2 wafers are close.展开更多
Physiotherapists usually ignore the electric polarization of human bodies that occurs under the influence of the electromagnetic forces of the Earth.This is irrational,since the positive or negative electrification of...Physiotherapists usually ignore the electric polarization of human bodies that occurs under the influence of the electromagnetic forces of the Earth.This is irrational,since the positive or negative electrification of human tissues has the opposite effect on both their properties and functional activity.How physiotherapists must take into account the polarizing effect of the electromagnetic forces of the Earth when analysing the functional states of the tissues of the human body is shown here.It also shows how these electromagnetic forces can be used by manual and physiotherapists.展开更多
Flexible,compact,lightweight and sustainable power sources are indispensable for modern wearable and personal electronics and small-unmanned aerial vehicles(UAVs).Hierarchical honeycomb has the unique merits of compac...Flexible,compact,lightweight and sustainable power sources are indispensable for modern wearable and personal electronics and small-unmanned aerial vehicles(UAVs).Hierarchical honeycomb has the unique merits of compact mesostructures,excellent energy absorption properties and considerable weight to strength ratios.Herein,a honeycomb-inspired triboelectric nanogenerator(h-TENG)is proposed for biomechanical and UAV morphing wing energy harvesting based on contact triboelectrification wavy surface of cellular honeycomb structure.The wavy surface comprises a multilayered thin film structure(combining polyethylene terephthalate,silver nanowires and fluorinated ethylene propylene)fabricated through high-temperature thermoplastic molding and wafer-level bonding process.With superior synchronization of large amounts of energy generation units with honeycomb cells,the manufactured h-TENG prototype produces the maximum instantaneous open-circuit voltage,short-circuit current and output power of 1207 V,68.5μA and 12.4 mW,respectively,corresponding to a remarkable peak power density of 0.275 mW cm^(−3)(or 2.48 mW g^(−1))under hand pressing excitations.Attributed to the excellent elastic property of self-rebounding honeycomb structure,the flexible and transparent h-TENG can be easily pressed,bent and integrated into shoes for real-time insole plantar pressure mapping.The lightweight and compact h-TENG is further installed into a morphing wing of small UAVs for efficiently converting the flapping energy of ailerons into electricity for the first time.This research demonstrates this new conceptualizing single h-TENG device’s versatility and viability for broad-range real-world application scenarios.展开更多
The aim of this paper is to present a theoretical study of the aerosol penetration through an electret fibrous filter, using a numerical approach. The aerosol sizes considered in this study were in the submicron range...The aim of this paper is to present a theoretical study of the aerosol penetration through an electret fibrous filter, using a numerical approach. The aerosol sizes considered in this study were in the submicron range, and in the numerical model, the conventional mechanical mechanisms （impaction, interception, diffusion and gravitationally settling） were taken into consideration along with the electrostatic mechanisms, including the Coulombic and dielectrophoretic effects. The aerosol penetration through an electret fibrous filter is heavily dependent on the aerosol penetration of a single fibre. The aerosol penetration through a single electret fibre under various filtration conditions was calculated. The effects of aerosol diameter, aerosol and fibre charge state, face velocity, packing density and aerosol dielectric constant on the aerosol penetration were investigated.展开更多
In this study,the hypertrophic scar（HS） model in rats was established.5-fluorouracil（5-FU）patch,-1000 V and-2000 V polypropylene（PP） electret 5-FU patches were prepared and applied onto the wound.The in vitro pe...In this study,the hypertrophic scar（HS） model in rats was established.5-fluorouracil（5-FU）patch,-1000 V and-2000 V polypropylene（PP） electret 5-FU patches were prepared and applied onto the wound.The in vitro permeation experiment was performed using the Franz diffusion cell system to determine the permeation cumulative amount and retention amount of5-FU through/in scar skin.The inhibition effect of negative electret on growth of HS was studied by hematoxylin-eosin（HE） staining,Masson staining and the immunohistologicall methods.The permeation study indicated that a negative electret could enhance the permeation and retention of 5-FU through and in scar skin respectively.HE staining and Masson staining indicated a better effect for-1000 V and-2000 V electret 5-FU patches on HS inhibition after28 d post-wounding compared with 5-FU patch.The immunohistological study showed much more reduced expressions of collegan type I,collegan type III,TGF-β1 and HSP47 in scar tissue after application of negative electret 5-FU patches than those of 5-FU patch.A negative electret5-FU patch may be advantageous for HS treatment.展开更多
This paper investigated the dependence of out-of-plane electret-based vibration energy harvesters’output power,frequency bandwidth,and resonance frequency on surface charge density and load resistance.As the external...This paper investigated the dependence of out-of-plane electret-based vibration energy harvesters’output power,frequency bandwidth,and resonance frequency on surface charge density and load resistance.As the external acceleration amplitude and electret size were held constant,the following results are predicted by the numerical investigation：（1）An optimum value exists in the surface charge density to maximize the output power.As the surface charge density is increasing,electrostatic forces are enhanced,which emphasizes that the soft spring effect widens the frequency bandwidth and lowers the resonance frequency.（2）Different surface charge densities correspond to different optimum initial air gaps,resonance frequency,and optimum load resistance.（3）With the attenuation of the surface potential,the output power,frequency drift,and frequency bandwidth decreased.（4）An optimum value exists in the load resistance to maximize the output power.As the load resistance is decreasing,electrostatic force is enhanced,which lowers the resonance frequency.（5）A maximum frequency bandwidth exists with further load resistance increasing,and the initial air gap is smaller,the greater the frequency bandwidth.展开更多
A novel high-voltage electrostatics corona ions pre-charger apparatus and methods were invented earlier by Hamade related to treat various types of receptors such as but not limited to electret polymer, air filters, p...A novel high-voltage electrostatics corona ions pre-charger apparatus and methods were invented earlier by Hamade related to treat various types of receptors such as but not limited to electret polymer, air filters, particulates, catalytic converters, bioaerosols, fluids, pollutants, virus, and bacteria. It is shown in this article that his work led to the construction of various prototype chargers, customized differently for each type of a receptor. In particular his recent development of biological matter corona charger(BMCC) prototype related to expose, treat, sanitize, and disinfect bioaerosols, virus, bacteria, and contaminated fluids and blood such as human immunodeficiency virus(HIV)-acquired immune deficiency syndrome(AIDS). It is shown in this paper that each previous investigated research contemplated ionized corona charger attendant to a charging process and the corona, imparts and provides enough treatment charges to receptors including the aforementioned receptors.Researchers often relied on adopting prior corona charger methods that do not necessarily and effectively solve the problems associated with them or utilize them for optimum treatment effect. The inventor exhaustively studied the characteristics of corona discharge, and has found that the greatest difficulty in corona discharge has to do with the maintenance of the corona, particularly when the receptor is being charged. This is due to variations in either the dielectric value between the corona electrode and a grounded base or flaws in the design as the receptor passes there between suppressing or hindering corona and its effectiveness. What is needed in-the-art is an apparatus and method to achieve maximum possible charge on a receptor, a charge order of magnitude greater than that used by other investigators. This often requires customizing each apparatus and method and does not just merely use one type of a charger to satisfy all applications. To satisfy this need, we build a low cost prototype BMCC that generates self-sustaining charge corona, eliminates many previous design flaws such as spark over, and make it ready for testing remotely or with apparatus.展开更多
Since 1982, the authors made research on the electret film FEP (fluorine ethylene-propylene; trade name: Bone-curing film) which was used to wrap on the surface on the limb for promoting bone union. From 1984, they us...Since 1982, the authors made research on the electret film FEP (fluorine ethylene-propylene; trade name: Bone-curing film) which was used to wrap on the surface on the limb for promoting bone union. From 1984, they used the electret film to treat 12 cases of nonunion. After 2-8 months of treatment and observation, among these 12 cases only 1 case which has lost of follow-up, 8 cases were united and 3 cases remained united.展开更多
Today, the sun is a very useful source of energy because it continuously radiates energy. An electron is radiating energy continuously, too. A new electrostatic generating method using this electric field energy from ...Today, the sun is a very useful source of energy because it continuously radiates energy. An electron is radiating energy continuously, too. A new electrostatic generating method using this electric field energy from electrons as a driving force of charge carriers was invented, and its success was presented on ESA 2017 and ESA 2019. This new electrostatic generator was realized by asymmetric electrostatic force, which is a new phenomenon. Unfortunately, its experimental success rate was rare. Therefore, the cause was searched by many experiments. Finally, it became apparent that the acceleration force of the charge carrier was not stronger than the deceleration force of the charge carrier with this experimental equipment. Therefore, the electrode arrangement of this equipment was improved. As a result, the acceleration force was increased, and the deceleration force was decreased. Then, the experimental success rate became 100%.展开更多
In today's fast-evolving technological landscape,the growing deployment of smart systems demands more efficient and adaptive information acquisition capabilities.Traditional contact-based sensors[1,2]are proving i...In today's fast-evolving technological landscape,the growing deployment of smart systems demands more efficient and adaptive information acquisition capabilities.Traditional contact-based sensors[1,2]are proving increasingly inadequate,facing limitations such mechanical abrasion,reduced stability,and constrained adaptability to dynamic environments,particularly evident in applications like smart homes and medical monitoring.The advent of non-contact sensing presents a transformative solution,offering safer,more durable,and versatile alternatives across diverse sectors.Leading this transition,tele-perception emerges as a cutting-edge paradigm,extending beyond conventional non-contact methods through the use of advanced electret materials that enable stable,long-range perception.Tele-perception technologies facilitate stimulus detection without physical contact,establishing a foundational component of adaptive embodied artificial intelligence systems across diverse fields including robotics,autonomous driving,and human-machine interaction(HMI).展开更多
Virtual reality(VR)is an emerging communication means and creates extensive opportunities in interacting scenarios such as remote collaboration and metaverse.Human-machine interfaces(HMIs)play important roles in VR as...Virtual reality(VR)is an emerging communication means and creates extensive opportunities in interacting scenarios such as remote collaboration and metaverse.Human-machine interfaces(HMIs)play important roles in VR as they provide interaction platforms between users and virtual environments.However,traditional VR HMIs based on handheld devices or keyboards cannot recognize diverse three-dimensional(3D)gestures,which results in limited freedom of VR interactions.Here,we report a noncontact VR HMI enabled by an electret-nanofiber-based triboelectric sensor(ETS),which is fabricated by the electrospun polylactic acid/thermoplastic polyurethane(PLA/TPU)electret nanofiber film.The nanofiber structure of PLA/TPU electret enhanced the charge retention ability of triboelectric sensor and thus significantly improved its signal strength and stability.Integrated with a deep learning-based multilayer perceptron neural network,the ETS realizes the recognition of 18 different types of 3D gestures with a high average accuracy of 97.3%.An intelligent noncontact VR interactive system based on the ETS is further developed,which is used to manipulate game characters for performing different actions by 3D gestures.Compared with traditional VR HMIs,the proposed VR HMI based on PLA/TPU electret nanofiber film can detect various 3D gestures and offers a superior interaction freedom.This work for the first time introduces the triboelectric 3D gesture recognition method to the VR HMIs,and could make the interaction between human and virtual environments become more efficient and fascinating.展开更多
Electrical stimulation has recently received attention as noninvasive treatment in skin wound healing with its outstanding biological property for clinical setting.However,the complexity of equipment for applying appr...Electrical stimulation has recently received attention as noninvasive treatment in skin wound healing with its outstanding biological property for clinical setting.However,the complexity of equipment for applying appropriate electrical stimulation remains an ongoing challenge.Here,we proposed a strategy for skin scar inhibition by providing electrical stimulation via a multilayer stacked electret(MS-electret),which can generate direct current(DC)electric field(EF)without any power supply equipment.In addition,the MS-electret can easily control the intensity of EFs by simply stacking electret layers and maintain stable EF with the surface potential of 3400 V over 5 days owing to the injected charges on the electret surface.We confirmed inhibition of type 1 collagen andα-SMA expression of human dermal fibroblasts(hDFs)by 90%and 44%in vitro,indicating that the transition of hDFs to myofibroblasts was restricted by applying stable electrical stimulation.We further revealed a 20%significant decrease in the ratio of myofibroblasts caused by the MS-electret in vivo.These findings present that the MS-electret is an outstanding candidate for effective skin scar inhibition with a battery-free,physiological electrical microenvironment,and noninvasive treatment that allows it to prevent external infection.展开更多
The degradation of filtration performance in electret filter media during usage poses a significant challenge. Pre-charging of aerosols has been identified as an effective method to mitigate this issue. However, the e...The degradation of filtration performance in electret filter media during usage poses a significant challenge. Pre-charging of aerosols has been identified as an effective method to mitigate this issue. However, the effects of particle charging characteristics on the loading characteristics of electret filters still need a comprehensive understanding. In this study, a needle-cylinder corona charger was employed to pre-charge aerosols, and the particle charge state was determined by multiphysics simulation. The effects of particle charge polarity and charge quantity on the loading performance of the electret filter were quantitatively investigated. The results showed that the particle charge polarity had a negligible impact on the loading performance under the condition of the equivalent particle charge quantity. In addition, the charged particles effectively improved the efficiency degradation during the loading process of electret media, with higher charge quantities resulting in more pronounced improvements. The electrostatic attenuation factor showed a negative exponential correlation with the particle charge quantity. This was attributed to the uneven particle deposition on fiber surface due to the attraction of charged particles by the opposite charges on the electret fibers, which alleviated the effect of electrostatic shielding.展开更多
基金supported by the Natural Science Foundation of Shandong Province(ZR2021MA011).
文摘Non-uniform deformation of the dielectric subjected to external forces can induce the flexoelectric effect, a phenomenon that couples electrical polarization to strain gradients. However, limited by the size effects, flexoelectricity is not significant at the macroscale and only becomes catchable at the microscale and nanoscale. In recent work, we obtained a considerable flexoelectric-like response by crumpling the dielectric embedded with charges, i.e., the electret, which significantly improved the flexoelectric effect at the macroscale. In this work, we further optimize the macroscopic performance of the flexoelectric response by applying gradient treatment to the electret films. Specifically, we analytically derive the electromechanical coupling of crumpled electret films with gradients of different thicknesses, charge densities, and Young’s moduli as key design variables. It is shown that the gradient-oriented electret film can be tuned to nearly five times that of a uniform electret film.
文摘In this work, the charge dynamics characteristics of injection, transport and decay in porous and non-porous polytetrafluoroethylene (PTFE) film electrets were investigated by means of corona charging, isothermal and thermal stimulating surface-potential decay measurements. The results showed that the initial surface potential, whether positively or negatively charging, is much higher in non-porous PTFE than in porous PTFE. For porous film the value of initial sur-face potentials increases with increase of film thickness. Higher charging temperature can remarkably improve charge stability. The charge dynamics are correlated to materials microstructure according to their scanning electron micrographs.For non-porous PTFE films, polarizability change of C-F bonds is the main origin of electret charges; but for porous PTFE film a large number of bulk and interface type traps are expected because of the greater area of interface and higher crys-tallinity.
基金Project supported by the National Natural Science Foundation of China(Grant No.20974108)the Natural Science Foundation of Anhui Province,China(Grant No.1308085QB40)the Fundamental Research Funds for the Central Universities of Ministry of Education of China(Grant Nos.2013HGQC0016 and 2011HGBZ1323)
文摘The effect of heating treatment on the trap level distribution in polyamide 66 film electret is studied by thermally stimulated depolarization current （TSDC） technique. For annealed polyamide 66, there are three trap levels that respectively originate from space charge trapped in amorphous phase, interphase and crystalline phase. There is one peak that originates from space charge trapped in amorphous phase for quenched one. Using multi-point method to fit the experimental curves, the detrapping current peaks can be separated and the trap depth is obtained. The shallower trap levels trapped in amorphous phase and interphase are obviously close to the deeper trap level trapped in crystalline phase for annealed polyamide 66 as the polarization temperature increases, while the trap level distribution remains unaffected by polarization temperature for quenched one.
基金National Natural Science Foundation of China(Grant No.51477175) for financial support
文摘In the present study,the electret 5-fluorouracil patch was developed,the effective surface potential,piezoelectric coefficient d33,open-circuit thermally stimulated discharge（TSD） current spectra and shear adhesion of the patch were measured.The drug release profile of the patch was determined by using high performance liquid chromatography method.A stable potential difference which was positively dependent on the surface potential of the electret was generated on two sides of the patch.The measurements of d33 coefficient,TSD current spectra and adhesion performance showed that the electrostatic field of the electret could cause polarization and cohesive strength decreasing of the matrix molecules,change the distribution and interaction of the drug molecules in patch,therefore to increase the release of drug from the transdermal patch.
文摘More than 30 years ago,a group of researchers in Tampere-Finland developed a thin foamed polymeric material for capacitive sensors.Such soft-voided films exhibited electrical charging characteristics,forming a powerful combination,which resulted in a smart-material with ferroelectric properties.The discovery of the electro-thermo mechanical film(ETMF)has sparked the curiosity of the electret community,leading to the development of several studies.At that time,ETMF became known as cellular electrets and,later,as ferroelectrets or piezoelectrets regarding their electromechanical properties.This paper provides a timeline review of the research on ferroelectrets produced in Brazil,between the years 1990 and 2020,towards demonstrating how the interest in the electret electrical charging mechanism has resulted in the use of ferroelectrets with well-controlled cavities for ultrasound applications.
基金supported by the National Basic Research Program of China ("973" Program) (Grant No. 2009CB320300)
文摘In this paper, performance of PECVD SiO 2 /Si 3 N 4 double layers electrets with different thicknesses were investigated detailedly in respect of chargeability, storage charge stability in high temperature and reliability in high humidity environment. Samples with different thicknesses of Si 3 N 4 and SiO 2 were prepared on Pyrex 7740 glass substrates and characterized by isothermal and high humidity charge decay. The results of experiment approved that the PECVD SiO 2 /Si 3 N 4 double layers electrets on glass substrate has as good chargeability and charge stability in high temperature and high humidity environment as thermal oxidation or APCVD/LPCVD ones on silicon substrates. The experiment results indicated that a Si 3 N 4 layer no less than 50 nm is necessary for good charge stability in high temperature and a Si 3 N 4 layer thicker than 500 nm decreases the chargeability. Even a 2 nm Si 3 N 4 layer is enough to significantly improve the charge stability in high humidity environment. Thick SiO 2 layer can increase the surface potential of electrets under the same charging condition and its charge stability in high temperature. However, the electrets with high surface potential also exhibit poor uniformity of charge stability in high humidity environment.
基金Financial support from the National Natural Science Foundation of China(No.12174102)the National Key Research and Development Program of China(No.2021YFC3001802)the Shanghai Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learning,and Shanghai Key Laboratory of Special Artificial Microstructure Materials and Technology is gratefully acknowledged.
文摘Nowadays,the demand for advanced functional materials in transducer technology is growing rapidly.Piezoelectric materials transform mechanical variables(displacement or force)into electrical signals(charge or voltage)and vice versa.They are interesting from both fundamental and application points of view.Ferrooelectrets(also called piezoelectrets)are a relatively young group of piezo-,pyro-and ferroelectric materials.They exhibit ferroic behavior phenomenologically undistinguishable from that of traditional ferroelectrics,although the materials per se are essentially non-polar space-charge electrets with artificial macroscopic dipoles(i.e.,internally charged cavities).A lot of work has been done on ferroelectrets and their applications up to now.In this paper,we review and discuss mostly the work done at University of Potsdam on the research and development of ferroelectrets.We will,however,also mention important results from other teams,and prospect the challenges and future progress trend of the field of ferroelectret research.
文摘1μm SiO2 layer was thermally grown on silicon wafer. Negative and positive charging of SiO2 layer was performed by means of corona method at room temperature. By controlling grid voltage, we have obtained uniformly charged SiO2 with surface potential from 500 to +200 V. With certain electric field, the electrostatic force between charged SiO2 is investigated. Experimental results indicate that attraction not only exists between charged SiO2 with different polarity, but also exists between charged SiO2 with the same polarity, and no repulsion has been observed. The attractive force is related to both surface potential difference of charged SiO2 and the uniformity of the electric field. Based on the experiment, the attractive force is supposed to be caused by polarization when two charged SiO2 wafers are close.
文摘Physiotherapists usually ignore the electric polarization of human bodies that occurs under the influence of the electromagnetic forces of the Earth.This is irrational,since the positive or negative electrification of human tissues has the opposite effect on both their properties and functional activity.How physiotherapists must take into account the polarizing effect of the electromagnetic forces of the Earth when analysing the functional states of the tissues of the human body is shown here.It also shows how these electromagnetic forces can be used by manual and physiotherapists.
基金This research is supported by the National Natural Science Foundation of China Grant(Nos.51705429&61801525)the Fundamental Research Funds for the Central Universities,Guangdong Natural Science Funds Grant(2018A030313400)+1 种基金Space Science and Technology Foundation,111 Project No.B13044UK Engineering and Physical Sciences Research Council(EPSRC)for support under grant EP/P018998/1,Newton Mobility Grant(IE161019)through Royal Society.
文摘Flexible,compact,lightweight and sustainable power sources are indispensable for modern wearable and personal electronics and small-unmanned aerial vehicles(UAVs).Hierarchical honeycomb has the unique merits of compact mesostructures,excellent energy absorption properties and considerable weight to strength ratios.Herein,a honeycomb-inspired triboelectric nanogenerator(h-TENG)is proposed for biomechanical and UAV morphing wing energy harvesting based on contact triboelectrification wavy surface of cellular honeycomb structure.The wavy surface comprises a multilayered thin film structure(combining polyethylene terephthalate,silver nanowires and fluorinated ethylene propylene)fabricated through high-temperature thermoplastic molding and wafer-level bonding process.With superior synchronization of large amounts of energy generation units with honeycomb cells,the manufactured h-TENG prototype produces the maximum instantaneous open-circuit voltage,short-circuit current and output power of 1207 V,68.5μA and 12.4 mW,respectively,corresponding to a remarkable peak power density of 0.275 mW cm^(−3)(or 2.48 mW g^(−1))under hand pressing excitations.Attributed to the excellent elastic property of self-rebounding honeycomb structure,the flexible and transparent h-TENG can be easily pressed,bent and integrated into shoes for real-time insole plantar pressure mapping.The lightweight and compact h-TENG is further installed into a morphing wing of small UAVs for efficiently converting the flapping energy of ailerons into electricity for the first time.This research demonstrates this new conceptualizing single h-TENG device’s versatility and viability for broad-range real-world application scenarios.
文摘The aim of this paper is to present a theoretical study of the aerosol penetration through an electret fibrous filter, using a numerical approach. The aerosol sizes considered in this study were in the submicron range, and in the numerical model, the conventional mechanical mechanisms （impaction, interception, diffusion and gravitationally settling） were taken into consideration along with the electrostatic mechanisms, including the Coulombic and dielectrophoretic effects. The aerosol penetration through an electret fibrous filter is heavily dependent on the aerosol penetration of a single fibre. The aerosol penetration through a single electret fibre under various filtration conditions was calculated. The effects of aerosol diameter, aerosol and fibre charge state, face velocity, packing density and aerosol dielectric constant on the aerosol penetration were investigated.
基金National Natural Science Foundation of China(Grant No.51477175) for financial support
文摘In this study,the hypertrophic scar（HS） model in rats was established.5-fluorouracil（5-FU）patch,-1000 V and-2000 V polypropylene（PP） electret 5-FU patches were prepared and applied onto the wound.The in vitro permeation experiment was performed using the Franz diffusion cell system to determine the permeation cumulative amount and retention amount of5-FU through/in scar skin.The inhibition effect of negative electret on growth of HS was studied by hematoxylin-eosin（HE） staining,Masson staining and the immunohistologicall methods.The permeation study indicated that a negative electret could enhance the permeation and retention of 5-FU through and in scar skin respectively.HE staining and Masson staining indicated a better effect for-1000 V and-2000 V electret 5-FU patches on HS inhibition after28 d post-wounding compared with 5-FU patch.The immunohistological study showed much more reduced expressions of collegan type I,collegan type III,TGF-β1 and HSP47 in scar tissue after application of negative electret 5-FU patches than those of 5-FU patch.A negative electret5-FU patch may be advantageous for HS treatment.
基金Supported by National High Technology R&D Program(SS2013AA041104)
文摘This paper investigated the dependence of out-of-plane electret-based vibration energy harvesters’output power,frequency bandwidth,and resonance frequency on surface charge density and load resistance.As the external acceleration amplitude and electret size were held constant,the following results are predicted by the numerical investigation：（1）An optimum value exists in the surface charge density to maximize the output power.As the surface charge density is increasing,electrostatic forces are enhanced,which emphasizes that the soft spring effect widens the frequency bandwidth and lowers the resonance frequency.（2）Different surface charge densities correspond to different optimum initial air gaps,resonance frequency,and optimum load resistance.（3）With the attenuation of the surface potential,the output power,frequency drift,and frequency bandwidth decreased.（4）An optimum value exists in the load resistance to maximize the output power.As the load resistance is decreasing,electrostatic force is enhanced,which lowers the resonance frequency.（5）A maximum frequency bandwidth exists with further load resistance increasing,and the initial air gap is smaller,the greater the frequency bandwidth.
文摘A novel high-voltage electrostatics corona ions pre-charger apparatus and methods were invented earlier by Hamade related to treat various types of receptors such as but not limited to electret polymer, air filters, particulates, catalytic converters, bioaerosols, fluids, pollutants, virus, and bacteria. It is shown in this article that his work led to the construction of various prototype chargers, customized differently for each type of a receptor. In particular his recent development of biological matter corona charger(BMCC) prototype related to expose, treat, sanitize, and disinfect bioaerosols, virus, bacteria, and contaminated fluids and blood such as human immunodeficiency virus(HIV)-acquired immune deficiency syndrome(AIDS). It is shown in this paper that each previous investigated research contemplated ionized corona charger attendant to a charging process and the corona, imparts and provides enough treatment charges to receptors including the aforementioned receptors.Researchers often relied on adopting prior corona charger methods that do not necessarily and effectively solve the problems associated with them or utilize them for optimum treatment effect. The inventor exhaustively studied the characteristics of corona discharge, and has found that the greatest difficulty in corona discharge has to do with the maintenance of the corona, particularly when the receptor is being charged. This is due to variations in either the dielectric value between the corona electrode and a grounded base or flaws in the design as the receptor passes there between suppressing or hindering corona and its effectiveness. What is needed in-the-art is an apparatus and method to achieve maximum possible charge on a receptor, a charge order of magnitude greater than that used by other investigators. This often requires customizing each apparatus and method and does not just merely use one type of a charger to satisfy all applications. To satisfy this need, we build a low cost prototype BMCC that generates self-sustaining charge corona, eliminates many previous design flaws such as spark over, and make it ready for testing remotely or with apparatus.
文摘Since 1982, the authors made research on the electret film FEP (fluorine ethylene-propylene; trade name: Bone-curing film) which was used to wrap on the surface on the limb for promoting bone union. From 1984, they used the electret film to treat 12 cases of nonunion. After 2-8 months of treatment and observation, among these 12 cases only 1 case which has lost of follow-up, 8 cases were united and 3 cases remained united.
文摘Today, the sun is a very useful source of energy because it continuously radiates energy. An electron is radiating energy continuously, too. A new electrostatic generating method using this electric field energy from electrons as a driving force of charge carriers was invented, and its success was presented on ESA 2017 and ESA 2019. This new electrostatic generator was realized by asymmetric electrostatic force, which is a new phenomenon. Unfortunately, its experimental success rate was rare. Therefore, the cause was searched by many experiments. Finally, it became apparent that the acceleration force of the charge carrier was not stronger than the deceleration force of the charge carrier with this experimental equipment. Therefore, the electrode arrangement of this equipment was improved. As a result, the acceleration force was increased, and the deceleration force was decreased. Then, the experimental success rate became 100%.
基金supported by the Beijing Natural Science Foundation (IS23040)the National Natural Science Foundation of China (22479016)。
文摘In today's fast-evolving technological landscape,the growing deployment of smart systems demands more efficient and adaptive information acquisition capabilities.Traditional contact-based sensors[1,2]are proving increasingly inadequate,facing limitations such mechanical abrasion,reduced stability,and constrained adaptability to dynamic environments,particularly evident in applications like smart homes and medical monitoring.The advent of non-contact sensing presents a transformative solution,offering safer,more durable,and versatile alternatives across diverse sectors.Leading this transition,tele-perception emerges as a cutting-edge paradigm,extending beyond conventional non-contact methods through the use of advanced electret materials that enable stable,long-range perception.Tele-perception technologies facilitate stimulus detection without physical contact,establishing a foundational component of adaptive embodied artificial intelligence systems across diverse fields including robotics,autonomous driving,and human-machine interaction(HMI).
基金supported by the National Natural Science Foundation of China(No.52303112)the Henan Province Science and Technology Research and Development Program Joint Fund Advantageous Discipline Cultivation Project(No.232301420033)+1 种基金the China Postdoctoral Science Foundation(Nos.2022TQ0281 and 2023M733213)the Key R&D and Promotion Special(Scientific Problem Tackling)Project of Henan Province(No.242102231014).
文摘Virtual reality(VR)is an emerging communication means and creates extensive opportunities in interacting scenarios such as remote collaboration and metaverse.Human-machine interfaces(HMIs)play important roles in VR as they provide interaction platforms between users and virtual environments.However,traditional VR HMIs based on handheld devices or keyboards cannot recognize diverse three-dimensional(3D)gestures,which results in limited freedom of VR interactions.Here,we report a noncontact VR HMI enabled by an electret-nanofiber-based triboelectric sensor(ETS),which is fabricated by the electrospun polylactic acid/thermoplastic polyurethane(PLA/TPU)electret nanofiber film.The nanofiber structure of PLA/TPU electret enhanced the charge retention ability of triboelectric sensor and thus significantly improved its signal strength and stability.Integrated with a deep learning-based multilayer perceptron neural network,the ETS realizes the recognition of 18 different types of 3D gestures with a high average accuracy of 97.3%.An intelligent noncontact VR interactive system based on the ETS is further developed,which is used to manipulate game characters for performing different actions by 3D gestures.Compared with traditional VR HMIs,the proposed VR HMI based on PLA/TPU electret nanofiber film can detect various 3D gestures and offers a superior interaction freedom.This work for the first time introduces the triboelectric 3D gesture recognition method to the VR HMIs,and could make the interaction between human and virtual environments become more efficient and fascinating.
基金National Research Foundation of Korea(NRF),Grant/Award Numbers:2021R1A4A1032782,2022R1C1C1008831Korean Fund for Regenerative Medicine(KFRM),Grant/Award Number:21A0102L1-12Postdoctoral Research Program of Sungkyunkwan University。
文摘Electrical stimulation has recently received attention as noninvasive treatment in skin wound healing with its outstanding biological property for clinical setting.However,the complexity of equipment for applying appropriate electrical stimulation remains an ongoing challenge.Here,we proposed a strategy for skin scar inhibition by providing electrical stimulation via a multilayer stacked electret(MS-electret),which can generate direct current(DC)electric field(EF)without any power supply equipment.In addition,the MS-electret can easily control the intensity of EFs by simply stacking electret layers and maintain stable EF with the surface potential of 3400 V over 5 days owing to the injected charges on the electret surface.We confirmed inhibition of type 1 collagen andα-SMA expression of human dermal fibroblasts(hDFs)by 90%and 44%in vitro,indicating that the transition of hDFs to myofibroblasts was restricted by applying stable electrical stimulation.We further revealed a 20%significant decrease in the ratio of myofibroblasts caused by the MS-electret in vivo.These findings present that the MS-electret is an outstanding candidate for effective skin scar inhibition with a battery-free,physiological electrical microenvironment,and noninvasive treatment that allows it to prevent external infection.
基金supported by the National Natural Science Foundation of China(No.51936005,52176155)It is also supported by the Basic and Applied Basic Research Foundation of Guangdong Province,China(No.2023A1515011516)Guangzhou Science and Technology Plan Project,China(No.2024A04J9884).
文摘The degradation of filtration performance in electret filter media during usage poses a significant challenge. Pre-charging of aerosols has been identified as an effective method to mitigate this issue. However, the effects of particle charging characteristics on the loading characteristics of electret filters still need a comprehensive understanding. In this study, a needle-cylinder corona charger was employed to pre-charge aerosols, and the particle charge state was determined by multiphysics simulation. The effects of particle charge polarity and charge quantity on the loading performance of the electret filter were quantitatively investigated. The results showed that the particle charge polarity had a negligible impact on the loading performance under the condition of the equivalent particle charge quantity. In addition, the charged particles effectively improved the efficiency degradation during the loading process of electret media, with higher charge quantities resulting in more pronounced improvements. The electrostatic attenuation factor showed a negative exponential correlation with the particle charge quantity. This was attributed to the uneven particle deposition on fiber surface due to the attraction of charged particles by the opposite charges on the electret fibers, which alleviated the effect of electrostatic shielding.
