In this paper,we propose a novel graph signal processing convolution recurrent network(GSP CRN)for signal enhancement against high suppressive interference(HSI)in wireless communications.GSPCRN consists of the short-t...In this paper,we propose a novel graph signal processing convolution recurrent network(GSP CRN)for signal enhancement against high suppressive interference(HSI)in wireless communications.GSPCRN consists of the short-time graph signal processing(SGSP)approach and a modified convolution recurrent network.Similar to the traditional shorttime time-frequency transformation,SGSP frames the complex-valued communication signal and transforms it to the graph-domain representations,where the connection and weight flexibility of each vertex are fully taken into account.In the presence of HSI,SGSP can extract signal features from new graph-domain dimensions and empower neural networks for weak signal enhancement.Two SGSP methods,adjacency singular value decomposition and implicit graph transformation,are designed to capture relationships among the sampling points in the segmented signals.Simulation results demonstrate that our proposed GSPCRN outperforms existing classic methods in extracting weak signals from the HSI environment.When the interference-to-signal ratio exceeds 27dB,only our proposed GSPCRN can achieve the interference mitigation.展开更多
In the last two decades, light-weight magnesium matrix composites have been the hot issue of material field due to their excellent mechanical and physical properties, e.g., high-specific strength and modulus, good wea...In the last two decades, light-weight magnesium matrix composites have been the hot issue of material field due to their excellent mechanical and physical properties, e.g., high-specific strength and modulus, good wear resistance, and damping capacity. As compared with aluminum matrix composites, magnesium matrix composites have merit in their specific weight and have wide applications in aerospace and aeronautical fields. Generally, the processing techniques for magnesium matrix composites can be categorized as conventional and special processing routes. In recent years, as a special processing route, metal melt infiltration into porous ceramic preform featured by its low cost and availability of high-volume fraction of reinforced ceramics have been receiving much attention. Thus, in this review, one emphasis was put on the description of this processing technique in association with the means to obtain good wettability, the prerequisite for this kind of processing method. Based on the recognized fact that there exist clean interface and bonding ability between ceramics and matrix metal, in-situ reaction synthesis is usually utilized to fabricate magnesium matrix composites. Therefore, the interfacial feature was also reviewed for the in-situ reaction synthesis. Characterizations of microstructures and various mechanical-physical properties were finally summarized for magnesium matrix composites including tensile response, wear resistance, creep behavior, and damping capacity.展开更多
A route combining powder metallurgy and subsequent friction stir processing was utilized to fabricate carbon nanotube （CNT） reinforced AI （CNT/AI） and 6061AI （CNT/6061AI） composites. Microstructural observations...A route combining powder metallurgy and subsequent friction stir processing was utilized to fabricate carbon nanotube （CNT） reinforced AI （CNT/AI） and 6061AI （CNT/6061AI） composites. Microstructural observations indicated that CNTs were uniformly dispersed in the matrix in both CNT/AI and CNT/6061AI composites. Mg and Si elements tended to segregate at CNT-AI interfaces in the CNT/6061AI composite during artificial aging treatment. The tensile properties of both the AI and 6061AI were increased by CNT incorporation. The electrical conductivity of CNT/AI was decreased by CNT addition, while CNT/6061AI exhibited an increase in electrical conductivity due to the Mg and Si segregation.展开更多
In this study, friction stir processing（FSP） was employed to modify cold-sprayed（CSed） AA2024/Al2 O3 metal matrix composites（MMCs）. Three different rotation speeds with a constant traverse speed were used for FS...In this study, friction stir processing（FSP） was employed to modify cold-sprayed（CSed） AA2024/Al2 O3 metal matrix composites（MMCs）. Three different rotation speeds with a constant traverse speed were used for FSP. Microstructural analysis of the FSPed specimens reveals significant Al2 O3 particle refinement and improved particle distribution over the as-sprayed deposits. After FSP, a microstructural and mechanical gradient MMC through the thickness direction was obtained. Therefore, a hybrid technique combining these two solid-state processes, i.e. CS and FSP, was proposed to produce functionally gradient deposits. The Guinier-Preston-Bagaryatskii zone was dissolved during FSP, while the amounts at different rotation speeds were approximately the same, which is possibly due to the excellent thermal conductivity of the used Cu substrate. Mechanical property tests confirm that FSP can effectively improve the tensile performance and Vickers hardness of CSed AA2024/Al2 O3 MMCs. The properties can be further enhanced with a larger rotation speed with a maximum increase of 25.9% in ultimate tensile strength and27.4% in elongation at 1500 rpm. Friction tests show that FSP decreases the wear resistance of CSed MMCs deposits due to the breakup of Al2 O3 particles. The average values and fluctuations of friction coefficients at different rotation speeds vary significantly.展开更多
Utilizing fly ash(FA)as reinforcement for magnesium matrix composites(MMCs)brings down the production cost and the land pollution.Magnesium alloy AZ31 was reinforced with FA particles(10 vol.%)successfully by two diff...Utilizing fly ash(FA)as reinforcement for magnesium matrix composites(MMCs)brings down the production cost and the land pollution.Magnesium alloy AZ31 was reinforced with FA particles(10 vol.%)successfully by two different processing methods namely conventional stir casting and friction stir processing(FSP).The microstructural features were observed using optical microscope,scanning electron microscope and electron backscatter diffraction.The sliding wear behavior was tested using a pin-on-disc wear apparatus.The stir cast composite showed inhomogeneous particle dispersion and coarse grain structure.Some of the FA particles decomposed and reacted with the matrix alloy to produce undesirable compounds.Conversely,FSP composite showed superior particle dispersion and fine,equiaxed grains by dynamic recrystallization.FA particles encountered disintegration but there was no interfacial reaction.FSP composite demonstrated higher strengthening and wear resistance to that of stir cast composite.The morphology of the worn surface and the wear debris were studied in detail.展开更多
Rising concerns about climate change drive the demand for lightweight components.Magnesium(Mg)alloys are highly valued for their low weight,making them increasingly important in various industries.Researchers focusing...Rising concerns about climate change drive the demand for lightweight components.Magnesium(Mg)alloys are highly valued for their low weight,making them increasingly important in various industries.Researchers focusing on enhancing the characteristics of Mg alloys and developing their Metal Matrix Composites(MMCs)have gained significant attention worldwide over the past decade,driven by the global shift towards lightweight materials.Friction Stir Processing(FSP)has emerged as a promising technique to enhance the properties of Mg alloys and produce Mg-MMCs.Initially,FSP adapted to refine grain size from the micro to the nano level and accelerated the development of MMCs due to its solid-state nature and the synergistic effects of microstructure refinement and reinforcement,improving strength,hardness,ductility,wear resistance,corrosion resistance,and fatigue strength.However,producing defect-free and sound FSPed Mg and Mg-MMCs requires addressing several variables and their interdependencies,which opens up a broad range of practical applications.Despite existing reviews on individual FSP of Mg,its alloys,and MMCs,an attempt has been made to analyze the latest research on these three aspects collectively to enhance the understanding,application,and effectiveness of FSP for Mg and its derivatives.This review article discusses the literature,classifies the importance of Mg alloys,provides a historical background,and explores developments and potential applications of FSPed Mg alloys.It focuses on novel fabrication methods,reinforcement strategies,machine and tool design parameters,material characterization,and integration with other methods for enhanced properties.The influence of process parameters and the emergence of defects are examined,along with specific applications in mono and hybrid composites and their microstructure evolution.The study identifies promising reinforcement materials and highlights research gaps in FSP for Mg alloys and MMCs production.It concludes with significant recommendations for further exploration,reflecting ongoing advancements in this field.展开更多
Wheat allergy has become a serious health threat worldwide and its prevalence has increased alarmingly in the past few years.Factors such as food matrix and food processing may alter the structure of wheat proteins,an...Wheat allergy has become a serious health threat worldwide and its prevalence has increased alarmingly in the past few years.Factors such as food matrix and food processing may alter the structure of wheat proteins,and hence affect its allergenic properties.However,few reports have focused on the influence of Chinese traditional starter fermentation on wheat allergy.In this study,5 starters from different regions of China were used for fermentation,and protein characteristics were monitored by sodium dodecyl sulfate polyacrylamide gel electropheresis,and immunoreactivity analyzed by immunoassay with allergenic serum was obtained from New Zealand white rabbits.The allergenicity of steamed and baked matrices was also evaluated.The results showed that the allergenicity of wheat dough was basically increased at the beginning and then decreased during fermentation,but specific trends depend on different starters.With the progress of fermentation,especially as pH value decreased to 3.0-4.0,the allergenicity decreased significantly.Baking and steaming can reduce the allergenicity of wheat matrix,but fermentation is not a key factor affecting the allergenic activity of proteins.Our results can provide a theoretical basis for controlling wheat allergenicity in food proces sing or producing hypoallergenic food.展开更多
Different pre-heating of boron carbide particles for reinforcement and different processing conditions were studied in this work. Being one of the most cost-effective industrial methods, conventional melt stir-casting...Different pre-heating of boron carbide particles for reinforcement and different processing conditions were studied in this work. Being one of the most cost-effective industrial methods, conventional melt stir-casting route was utilized.Result showed that the boron carbide particles distributed well for a suitable pre-heating temperature and processed in air.No reaction product was found at the A1-B4C interfaces at the resolution limit of SEM used in that way.展开更多
Rutile(TiO_2) particle-reinforced aluminum matrix composites were prepared by friction stir processing. The microstructure was studied using conventional and advanced characterization techniques. TiO_2 particles were ...Rutile(TiO_2) particle-reinforced aluminum matrix composites were prepared by friction stir processing. The microstructure was studied using conventional and advanced characterization techniques. TiO_2 particles were found to be dispersed uniformly in the composite. Clusters of TiO_2 particles were observed at a higher particle content of 18 vol%. The interface between the TiO_2 particle and the aluminum matrix was characterized by the absence of pores and reactive layer.Sub-grain boundaries, ultra-fine grains and dislocation density were observed in the composites. TiO_2 particles improved the mechanical properties of the composites. However, a drop in tensile strength was observed at a higher particle content due to cluster formation. All the prepared composites exhibited ductile mode of fracture.展开更多
The development of shape-customizable and bulk flexible electrochemical devices through processing technologies as versatile as those used for plastics promises to revolutionize the future of battery technology.Howeve...The development of shape-customizable and bulk flexible electrochemical devices through processing technologies as versatile as those used for plastics promises to revolutionize the future of battery technology.However,this pursuit has been fundamentally hindered by the absence of transformative battery materials capable of delivering the necessary electrochemical functions,robust interface adhesion,and,crucially,the suitable rheological properties required for on-demand shaping.In this work,we introduce a concept of a multifunctional plasticine electrode matrix(PEM)featuring nano-interpenetrating networks(nano-IPN)to address this challenge.Utilizing the nonflammable liquid-electrolyte hydration combined with conductive nanomaterials,we have realized a PEM in the form of a multifunctional nanocomposite that integrates ion and electron conduction,component binding,non-flammability,and plasticine-like moldability.With this PEM,we have successfully fabricated a variety of bulk-flexible electrodes with high mass loading of active material(AM)(>70 wt%)using industry-friendly extrusion and compression molding techniques.Moreover,these high AM-loading composite electrodes achieve an unparalleled bulk conformability and flexibility,remaining structurally intact even under severe mechanical stress.Ultimately,we have successfully produced shape-patternable and flexible batteries via extrusion molding.This study underscores the potential of the PEM to revolutionize battery microstructures,interfaces,manufacturing processes,and performance characteristics.展开更多
The hot deformation characteristics of TiC particles reinforced titanium matrix composite were studied in the temperature range from 900 ℃ to 1 150 ℃ and in the strain rate range of 10-3-10 s-1 by compression tests ...The hot deformation characteristics of TiC particles reinforced titanium matrix composite were studied in the temperature range from 900 ℃ to 1 150 ℃ and in the strain rate range of 10-3-10 s-1 by compression tests with Gleeble1500 simulator system. The flow behavior was described by the hyperbolic sine constitutive equation,and an average activation energy of 436.72 kJ/mol was calculated. The processing maps were calculated and analyzed according to the dynamic materials model. The maps show domains in some combinations of temperatures and strain rates and these domains are correlated with specific microstructural processes occurring during hot deformation by metallographic investigations and kinetic analysis. At the low strain rate domain occurs in the temperature range of 900-960 ℃ and strain rate range of 0.001-0.03 s-1 superplasticity and dynamic recrystallization were observed. At a high strain rate domain occurs in the temperature range of 980-1 120 ℃ and strain rate range of 0.1-10 s-1 the β phase undergoes dynamic recrystallization. Also,at a strain rate range of 0.1-10 s-1 and the temperature range of 900-930 ℃,the material exhibits flow localization.展开更多
The squeeze cast process parameters of AZ80 magnesium alloy were optimized by morphological matrix. Experiments were conducted by varying squeeze pressure, die pre-heat temperature and pressure duration using L9（33）...The squeeze cast process parameters of AZ80 magnesium alloy were optimized by morphological matrix. Experiments were conducted by varying squeeze pressure, die pre-heat temperature and pressure duration using L9（33） orthogonal array of Taguchi method. In Taguchi method, a 3-level orthogonal array was used to determine the signal/noise ratio. Analysis of variance was used to determine the most significant process parameters affecting the mechanical properties. Mechanical properties such as ultimate tensile strength, elongation and hardness of the components were ascertained using multi variable linear regression analysis. Optimal squeeze cast process parameters were obtained.展开更多
To improve the inconsistency in the analytic hierarchy process(AHP), a new method based on marginal optimization theory is proposed. During the improving process, this paper regards the reduction of consistency ratio(...To improve the inconsistency in the analytic hierarchy process(AHP), a new method based on marginal optimization theory is proposed. During the improving process, this paper regards the reduction of consistency ratio(CR) as benefit, and the maximum modification compared to the original pairwise comparison matrix(PCM) as cost, then the improvement of consistency is transformed to a benefit/cost analysis problem. According to the maximal marginal effect principle, the elements of PCM are modified by a fixed increment(or decrement) step by step till the consistency ratio becomes acceptable, which can ensure minimum adjustment to the original PCM so that the decision makers’ judgment is preserved as much as possible. The correctness of the proposed method is proved mathematically by theorem. Firstly, the marginal benefit/cost ratio is calculated for each single element of the PCM when it has been modified by a fixed increment(or decrement).Then, modification to the element with the maximum marginal benefit/cost ratio is accepted. Next, the marginal benefit/cost ratio is calculated again upon the revised matrix, and followed by choosing the modification to the element with the maximum marginal benefit/cost ratio. The process of calculating marginal effect and choosing the best modified element is repeated for each revised matrix till acceptable consistency is reached, i.e., CR<0.1. Finally,illustrative examples show the proposed method is more effective and better in preserving the original comparison information than existing methods.展开更多
Velocity volume processing （VVP） retrieval of single Doppler radar is an effective method which can be used to obtain many wind parameters. However, due to the problem of an ill-conditioned matrix arising from the c...Velocity volume processing （VVP） retrieval of single Doppler radar is an effective method which can be used to obtain many wind parameters. However, due to the problem of an ill-conditioned matrix arising from the coefficients of equations not being easily resolved, the VVP method has not been applied adequately and effectively in operation. In this paper, an improved scheme, SVVP （step velocity volume processing）, based on the original method, is proposed. The improved algorithm retrieves each group of components of the wind field through a stepwise procedure, which overcomes the problem of an ill-conditioned matrix, which currently limits the application of the VVP method. Variables in a six-parameter model can be retrieved even if the analysis volume is very small. In addition, the source and order of errors which exist in the traditional method are analyzed. The improved method is applied to real cases, which show that it is robust and has the capability to obtain the wind field structure of the local convective system. It is very helpful for studying severe storms.展开更多
The present work aims to enhance the ballistic resistance of AA7005 alloy by incorporating the TiB2 and B4C ceramic reinforcement particles. Surface composites with different weight fractions of TiB2 and B4C particles...The present work aims to enhance the ballistic resistance of AA7005 alloy by incorporating the TiB2 and B4C ceramic reinforcement particles. Surface composites with different weight fractions of TiB2 and B4C particles were processed by friction stir processing. Micro-hardness and depth of penetration tests were carried out to evaluate the ballistic properties of the surface composites. The surface hardness of the composite was found to be nearly 70 HV higher than base alloy. The depth of penetration of the steel projectile was 20e26mm in the composites as compared to 37mm in the base alloy. Ballistic mass efficiency factor of the surface composite was found to be 1.6 times higher than base alloy. This is mainly attributed to the dispersion strengthening from the reinforcement particles.展开更多
In this paper the Expendable Pattern Casting with dry sand Vacuum(EPC-V) process is used to manufacture iron matrix composites with tungsten carbide particle.Microstructures of the composites layers were analyzed.The ...In this paper the Expendable Pattern Casting with dry sand Vacuum(EPC-V) process is used to manufacture iron matrix composites with tungsten carbide particle.Microstructures of the composites layers were analyzed.The abrasive wear resistance of the composites layers were tested and compared with that of high chromium cast iron.The results show that the iron matrix composites with tungsten carbide particle have high hardness.The abrasive wear resistance of composites with tungsten carbide particle is higher than that of high chromium cast iron.The properties of the matrix materials have been improved remarkably.展开更多
Poor ductility is the primary concern of magnesium matrix composites(MMCs)inflicted by non-deformable ceramic particle reinforcements.Metal particles which melt at elevated temperature can be used as reinforcement to ...Poor ductility is the primary concern of magnesium matrix composites(MMCs)inflicted by non-deformable ceramic particle reinforcements.Metal particles which melt at elevated temperature can be used as reinforcement to improve the deformation characteristics.Ti-6Al-4V particles reinforced AZ31 MMCs were produced through friction stir processing(FSP)which was carried out in a traditional vertical milling machine.The microstructural features as well as the response to external tensile load were explored.A homogenous distribution of Ti-6Al-4V was achieved at every part of the stir zone.There was no chemical decomposition of Ti-6Al-4V.Further,Ti-6Al-4V did not react with Al and Zn present in AZ31 alloy to form new compounds.A continuous strong interface was obtained around Ti-6Al-4V particle with the matrix.Ti-6Al-4V particles underwent breakage during processing due to severe plastic strain.There was a remarkable refinement of grains in the composite caused by dynamic recrystallization in addition to the pinning of smaller size broken particles.Dense dislocations were observed in the matrix because of plastic deformation and the associated strain misfit.Ti-6Al-4V particles improved the tensile behavior and assisted to obtain appreciable deformation before fracture.Brittle mode of failure was avoided.展开更多
This paper proposes a unified clutter model incorporating the effects of range walk and array rotation for space-time adaptive processing（STAP） in airborne multi-channel early-warning radar.Based on this clutter mod...This paper proposes a unified clutter model incorporating the effects of range walk and array rotation for space-time adaptive processing（STAP） in airborne multi-channel early-warning radar.Based on this clutter model,STAP performance is then analyzed from the perspective of covariance matrix tapering（CMT）.For STAP performance degradation due to array rotation,a determinate compensation method is proposed based on the CMT method.Numerical examples are provided to verify the analysis and the proposed compensation method.展开更多
基金supported by he National Social Science Found of China(2022-SKJJ-B-112).
文摘In this paper,we propose a novel graph signal processing convolution recurrent network(GSP CRN)for signal enhancement against high suppressive interference(HSI)in wireless communications.GSPCRN consists of the short-time graph signal processing(SGSP)approach and a modified convolution recurrent network.Similar to the traditional shorttime time-frequency transformation,SGSP frames the complex-valued communication signal and transforms it to the graph-domain representations,where the connection and weight flexibility of each vertex are fully taken into account.In the presence of HSI,SGSP can extract signal features from new graph-domain dimensions and empower neural networks for weak signal enhancement.Two SGSP methods,adjacency singular value decomposition and implicit graph transformation,are designed to capture relationships among the sampling points in the segmented signals.Simulation results demonstrate that our proposed GSPCRN outperforms existing classic methods in extracting weak signals from the HSI environment.When the interference-to-signal ratio exceeds 27dB,only our proposed GSPCRN can achieve the interference mitigation.
基金financially supported by the National Natural Science Foundation of China (Grant No.51271051)
文摘In the last two decades, light-weight magnesium matrix composites have been the hot issue of material field due to their excellent mechanical and physical properties, e.g., high-specific strength and modulus, good wear resistance, and damping capacity. As compared with aluminum matrix composites, magnesium matrix composites have merit in their specific weight and have wide applications in aerospace and aeronautical fields. Generally, the processing techniques for magnesium matrix composites can be categorized as conventional and special processing routes. In recent years, as a special processing route, metal melt infiltration into porous ceramic preform featured by its low cost and availability of high-volume fraction of reinforced ceramics have been receiving much attention. Thus, in this review, one emphasis was put on the description of this processing technique in association with the means to obtain good wettability, the prerequisite for this kind of processing method. Based on the recognized fact that there exist clean interface and bonding ability between ceramics and matrix metal, in-situ reaction synthesis is usually utilized to fabricate magnesium matrix composites. Therefore, the interfacial feature was also reviewed for the in-situ reaction synthesis. Characterizations of microstructures and various mechanical-physical properties were finally summarized for magnesium matrix composites including tensile response, wear resistance, creep behavior, and damping capacity.
基金the support of the National Basic Research Program,China(Grant Nos.2011CB932603 and 2012CB619600)the National Natural Science Foundation, China(Grant No.51331008)
文摘A route combining powder metallurgy and subsequent friction stir processing was utilized to fabricate carbon nanotube （CNT） reinforced AI （CNT/AI） and 6061AI （CNT/6061AI） composites. Microstructural observations indicated that CNTs were uniformly dispersed in the matrix in both CNT/AI and CNT/6061AI composites. Mg and Si elements tended to segregate at CNT-AI interfaces in the CNT/6061AI composite during artificial aging treatment. The tensile properties of both the AI and 6061AI were increased by CNT incorporation. The electrical conductivity of CNT/AI was decreased by CNT addition, while CNT/6061AI exhibited an increase in electrical conductivity due to the Mg and Si segregation.
基金financially by the National Key Research and Development Program of China (No. 2016YFB1100104)the Fund of SAST (No. SAST2016043)the 111 Project (No. B08040)
文摘In this study, friction stir processing（FSP） was employed to modify cold-sprayed（CSed） AA2024/Al2 O3 metal matrix composites（MMCs）. Three different rotation speeds with a constant traverse speed were used for FSP. Microstructural analysis of the FSPed specimens reveals significant Al2 O3 particle refinement and improved particle distribution over the as-sprayed deposits. After FSP, a microstructural and mechanical gradient MMC through the thickness direction was obtained. Therefore, a hybrid technique combining these two solid-state processes, i.e. CS and FSP, was proposed to produce functionally gradient deposits. The Guinier-Preston-Bagaryatskii zone was dissolved during FSP, while the amounts at different rotation speeds were approximately the same, which is possibly due to the excellent thermal conductivity of the used Cu substrate. Mechanical property tests confirm that FSP can effectively improve the tensile performance and Vickers hardness of CSed AA2024/Al2 O3 MMCs. The properties can be further enhanced with a larger rotation speed with a maximum increase of 25.9% in ultimate tensile strength and27.4% in elongation at 1500 rpm. Friction tests show that FSP decreases the wear resistance of CSed MMCs deposits due to the breakup of Al2 O3 particles. The average values and fluctuations of friction coefficients at different rotation speeds vary significantly.
文摘Utilizing fly ash(FA)as reinforcement for magnesium matrix composites(MMCs)brings down the production cost and the land pollution.Magnesium alloy AZ31 was reinforced with FA particles(10 vol.%)successfully by two different processing methods namely conventional stir casting and friction stir processing(FSP).The microstructural features were observed using optical microscope,scanning electron microscope and electron backscatter diffraction.The sliding wear behavior was tested using a pin-on-disc wear apparatus.The stir cast composite showed inhomogeneous particle dispersion and coarse grain structure.Some of the FA particles decomposed and reacted with the matrix alloy to produce undesirable compounds.Conversely,FSP composite showed superior particle dispersion and fine,equiaxed grains by dynamic recrystallization.FA particles encountered disintegration but there was no interfacial reaction.FSP composite demonstrated higher strengthening and wear resistance to that of stir cast composite.The morphology of the worn surface and the wear debris were studied in detail.
文摘Rising concerns about climate change drive the demand for lightweight components.Magnesium(Mg)alloys are highly valued for their low weight,making them increasingly important in various industries.Researchers focusing on enhancing the characteristics of Mg alloys and developing their Metal Matrix Composites(MMCs)have gained significant attention worldwide over the past decade,driven by the global shift towards lightweight materials.Friction Stir Processing(FSP)has emerged as a promising technique to enhance the properties of Mg alloys and produce Mg-MMCs.Initially,FSP adapted to refine grain size from the micro to the nano level and accelerated the development of MMCs due to its solid-state nature and the synergistic effects of microstructure refinement and reinforcement,improving strength,hardness,ductility,wear resistance,corrosion resistance,and fatigue strength.However,producing defect-free and sound FSPed Mg and Mg-MMCs requires addressing several variables and their interdependencies,which opens up a broad range of practical applications.Despite existing reviews on individual FSP of Mg,its alloys,and MMCs,an attempt has been made to analyze the latest research on these three aspects collectively to enhance the understanding,application,and effectiveness of FSP for Mg and its derivatives.This review article discusses the literature,classifies the importance of Mg alloys,provides a historical background,and explores developments and potential applications of FSPed Mg alloys.It focuses on novel fabrication methods,reinforcement strategies,machine and tool design parameters,material characterization,and integration with other methods for enhanced properties.The influence of process parameters and the emergence of defects are examined,along with specific applications in mono and hybrid composites and their microstructure evolution.The study identifies promising reinforcement materials and highlights research gaps in FSP for Mg alloys and MMCs production.It concludes with significant recommendations for further exploration,reflecting ongoing advancements in this field.
基金supported by the National Natural Science Foundation of China(31872904)。
文摘Wheat allergy has become a serious health threat worldwide and its prevalence has increased alarmingly in the past few years.Factors such as food matrix and food processing may alter the structure of wheat proteins,and hence affect its allergenic properties.However,few reports have focused on the influence of Chinese traditional starter fermentation on wheat allergy.In this study,5 starters from different regions of China were used for fermentation,and protein characteristics were monitored by sodium dodecyl sulfate polyacrylamide gel electropheresis,and immunoreactivity analyzed by immunoassay with allergenic serum was obtained from New Zealand white rabbits.The allergenicity of steamed and baked matrices was also evaluated.The results showed that the allergenicity of wheat dough was basically increased at the beginning and then decreased during fermentation,but specific trends depend on different starters.With the progress of fermentation,especially as pH value decreased to 3.0-4.0,the allergenicity decreased significantly.Baking and steaming can reduce the allergenicity of wheat matrix,but fermentation is not a key factor affecting the allergenic activity of proteins.Our results can provide a theoretical basis for controlling wheat allergenicity in food proces sing or producing hypoallergenic food.
文摘Different pre-heating of boron carbide particles for reinforcement and different processing conditions were studied in this work. Being one of the most cost-effective industrial methods, conventional melt stir-casting route was utilized.Result showed that the boron carbide particles distributed well for a suitable pre-heating temperature and processed in air.No reaction product was found at the A1-B4C interfaces at the resolution limit of SEM used in that way.
文摘Rutile(TiO_2) particle-reinforced aluminum matrix composites were prepared by friction stir processing. The microstructure was studied using conventional and advanced characterization techniques. TiO_2 particles were found to be dispersed uniformly in the composite. Clusters of TiO_2 particles were observed at a higher particle content of 18 vol%. The interface between the TiO_2 particle and the aluminum matrix was characterized by the absence of pores and reactive layer.Sub-grain boundaries, ultra-fine grains and dislocation density were observed in the composites. TiO_2 particles improved the mechanical properties of the composites. However, a drop in tensile strength was observed at a higher particle content due to cluster formation. All the prepared composites exhibited ductile mode of fracture.
基金financial support from the National Natural Science Foundation of China(52473248,52203123,52125301,22279070 and U21A20170)the State Key Laboratory of Polymer Materials Engineering(Grant No:sklpme 2023-1-05 and sklpme 2024-2-04)+3 种基金the Ministry of Science and Technology of China(No.2019YFA0705703)the Sichuan Science and Technology Program(2023NSFSC0991 and 2025ZNSFSC1411)the Fundamental Research Funds for the Central Universitiespartially sponsored by the Double First-Class Construction Funds of Sichuan University.
文摘The development of shape-customizable and bulk flexible electrochemical devices through processing technologies as versatile as those used for plastics promises to revolutionize the future of battery technology.However,this pursuit has been fundamentally hindered by the absence of transformative battery materials capable of delivering the necessary electrochemical functions,robust interface adhesion,and,crucially,the suitable rheological properties required for on-demand shaping.In this work,we introduce a concept of a multifunctional plasticine electrode matrix(PEM)featuring nano-interpenetrating networks(nano-IPN)to address this challenge.Utilizing the nonflammable liquid-electrolyte hydration combined with conductive nanomaterials,we have realized a PEM in the form of a multifunctional nanocomposite that integrates ion and electron conduction,component binding,non-flammability,and plasticine-like moldability.With this PEM,we have successfully fabricated a variety of bulk-flexible electrodes with high mass loading of active material(AM)(>70 wt%)using industry-friendly extrusion and compression molding techniques.Moreover,these high AM-loading composite electrodes achieve an unparalleled bulk conformability and flexibility,remaining structurally intact even under severe mechanical stress.Ultimately,we have successfully produced shape-patternable and flexible batteries via extrusion molding.This study underscores the potential of the PEM to revolutionize battery microstructures,interfaces,manufacturing processes,and performance characteristics.
基金Projects(50434030) supported by the National Natural Science Foundation of China
文摘The hot deformation characteristics of TiC particles reinforced titanium matrix composite were studied in the temperature range from 900 ℃ to 1 150 ℃ and in the strain rate range of 10-3-10 s-1 by compression tests with Gleeble1500 simulator system. The flow behavior was described by the hyperbolic sine constitutive equation,and an average activation energy of 436.72 kJ/mol was calculated. The processing maps were calculated and analyzed according to the dynamic materials model. The maps show domains in some combinations of temperatures and strain rates and these domains are correlated with specific microstructural processes occurring during hot deformation by metallographic investigations and kinetic analysis. At the low strain rate domain occurs in the temperature range of 900-960 ℃ and strain rate range of 0.001-0.03 s-1 superplasticity and dynamic recrystallization were observed. At a high strain rate domain occurs in the temperature range of 980-1 120 ℃ and strain rate range of 0.1-10 s-1 the β phase undergoes dynamic recrystallization. Also,at a strain rate range of 0.1-10 s-1 and the temperature range of 900-930 ℃,the material exhibits flow localization.
基金Project (50975263) supported by the National Natural Science Foundation of ChinaProject (2011DFA50520) supported by International Science Technology Cooperation Program of China
文摘The squeeze cast process parameters of AZ80 magnesium alloy were optimized by morphological matrix. Experiments were conducted by varying squeeze pressure, die pre-heat temperature and pressure duration using L9（33） orthogonal array of Taguchi method. In Taguchi method, a 3-level orthogonal array was used to determine the signal/noise ratio. Analysis of variance was used to determine the most significant process parameters affecting the mechanical properties. Mechanical properties such as ultimate tensile strength, elongation and hardness of the components were ascertained using multi variable linear regression analysis. Optimal squeeze cast process parameters were obtained.
基金supported by the National Natural Science Foundation of China(6160150161502521)
文摘To improve the inconsistency in the analytic hierarchy process(AHP), a new method based on marginal optimization theory is proposed. During the improving process, this paper regards the reduction of consistency ratio(CR) as benefit, and the maximum modification compared to the original pairwise comparison matrix(PCM) as cost, then the improvement of consistency is transformed to a benefit/cost analysis problem. According to the maximal marginal effect principle, the elements of PCM are modified by a fixed increment(or decrement) step by step till the consistency ratio becomes acceptable, which can ensure minimum adjustment to the original PCM so that the decision makers’ judgment is preserved as much as possible. The correctness of the proposed method is proved mathematically by theorem. Firstly, the marginal benefit/cost ratio is calculated for each single element of the PCM when it has been modified by a fixed increment(or decrement).Then, modification to the element with the maximum marginal benefit/cost ratio is accepted. Next, the marginal benefit/cost ratio is calculated again upon the revised matrix, and followed by choosing the modification to the element with the maximum marginal benefit/cost ratio. The process of calculating marginal effect and choosing the best modified element is repeated for each revised matrix till acceptable consistency is reached, i.e., CR<0.1. Finally,illustrative examples show the proposed method is more effective and better in preserving the original comparison information than existing methods.
文摘Velocity volume processing （VVP） retrieval of single Doppler radar is an effective method which can be used to obtain many wind parameters. However, due to the problem of an ill-conditioned matrix arising from the coefficients of equations not being easily resolved, the VVP method has not been applied adequately and effectively in operation. In this paper, an improved scheme, SVVP （step velocity volume processing）, based on the original method, is proposed. The improved algorithm retrieves each group of components of the wind field through a stepwise procedure, which overcomes the problem of an ill-conditioned matrix, which currently limits the application of the VVP method. Variables in a six-parameter model can be retrieved even if the analysis volume is very small. In addition, the source and order of errors which exist in the traditional method are analyzed. The improved method is applied to real cases, which show that it is robust and has the capability to obtain the wind field structure of the local convective system. It is very helpful for studying severe storms.
基金supported by Defence Institute of Advanced Technology(DIAT),Pune(DIAT-In house Project)
文摘The present work aims to enhance the ballistic resistance of AA7005 alloy by incorporating the TiB2 and B4C ceramic reinforcement particles. Surface composites with different weight fractions of TiB2 and B4C particles were processed by friction stir processing. Micro-hardness and depth of penetration tests were carried out to evaluate the ballistic properties of the surface composites. The surface hardness of the composite was found to be nearly 70 HV higher than base alloy. The depth of penetration of the steel projectile was 20e26mm in the composites as compared to 37mm in the base alloy. Ballistic mass efficiency factor of the surface composite was found to be 1.6 times higher than base alloy. This is mainly attributed to the dispersion strengthening from the reinforcement particles.
文摘In this paper the Expendable Pattern Casting with dry sand Vacuum(EPC-V) process is used to manufacture iron matrix composites with tungsten carbide particle.Microstructures of the composites layers were analyzed.The abrasive wear resistance of the composites layers were tested and compared with that of high chromium cast iron.The results show that the iron matrix composites with tungsten carbide particle have high hardness.The abrasive wear resistance of composites with tungsten carbide particle is higher than that of high chromium cast iron.The properties of the matrix materials have been improved remarkably.
文摘Poor ductility is the primary concern of magnesium matrix composites(MMCs)inflicted by non-deformable ceramic particle reinforcements.Metal particles which melt at elevated temperature can be used as reinforcement to improve the deformation characteristics.Ti-6Al-4V particles reinforced AZ31 MMCs were produced through friction stir processing(FSP)which was carried out in a traditional vertical milling machine.The microstructural features as well as the response to external tensile load were explored.A homogenous distribution of Ti-6Al-4V was achieved at every part of the stir zone.There was no chemical decomposition of Ti-6Al-4V.Further,Ti-6Al-4V did not react with Al and Zn present in AZ31 alloy to form new compounds.A continuous strong interface was obtained around Ti-6Al-4V particle with the matrix.Ti-6Al-4V particles underwent breakage during processing due to severe plastic strain.There was a remarkable refinement of grains in the composite caused by dynamic recrystallization in addition to the pinning of smaller size broken particles.Dense dislocations were observed in the matrix because of plastic deformation and the associated strain misfit.Ti-6Al-4V particles improved the tensile behavior and assisted to obtain appreciable deformation before fracture.Brittle mode of failure was avoided.
基金supported by the National Natural Science Foundation of China(60901056)
文摘This paper proposes a unified clutter model incorporating the effects of range walk and array rotation for space-time adaptive processing（STAP） in airborne multi-channel early-warning radar.Based on this clutter model,STAP performance is then analyzed from the perspective of covariance matrix tapering（CMT）.For STAP performance degradation due to array rotation,a determinate compensation method is proposed based on the CMT method.Numerical examples are provided to verify the analysis and the proposed compensation method.
