A selfmade positively charged nanofiltration （NF） membrane was used to treat textile dye effluent to generate water for reuse, and the factors affecting nanofiltration process such as operating pressure, feed flow a...A selfmade positively charged nanofiltration （NF） membrane was used to treat textile dye effluent to generate water for reuse, and the factors affecting nanofiltration process such as operating pressure, feed flow and membrane cleaning were investigated. With an applied pressure of 1.0 MPa and a feed flow of 40 L/h, this NF membrane has a removal of 93.3% for CODor and a reduction of approximately 51.0% in TDS, salinity and conductivity achieving the chroma removal of 100%. The permeate obtained through this membrane is suitable for recycling. Moreover, the membrane could be reused after being cleaned with 1% NaOH solution.展开更多
Combined with anti-waterlogging ditches, irrigation with treated paper mill effluent （TPME） and plowing were applied in this study to investigate the effects of remediation of degraded coastal sa- line-alkaline wetl...Combined with anti-waterlogging ditches, irrigation with treated paper mill effluent （TPME） and plowing were applied in this study to investigate the effects of remediation of degraded coastal sa- line-alkaline wetlands. Three treatments were employed, viz., control （CK）, irrigated with 10 cm depth of TPME （I）, and plowing to 20 cm deep before irrigating 10 cm depth ofTPME （IP）. Results show that both I-treatment and IP-treatment could improve soil structure by decreasing bulk density by 5% and 8%. Irrigation with TPME containing low salinity stimulated salts leaching instead of accumulating. With anti-waterlogging ditches, salts were drained out of soil. Irrigation with 10 cm depth of TPME lowered total soluble salts in soil and sodium adsorption ration by 33% and 8%, respective!y, but there was no significant difference compared with CK, indicating that this irrigation rate was not heavy enough to remarkably reduce so!l salinity and sodicity, Thus, in-i： gation rate should be enhanced in order to reach better effects of desalinization and desodication. Irrigation with TPME significantly increased soil organic matter, alkali-hydrolyzable nitrogen and available phosphorus due to the abundant organic matter in TPME. Plowing increased soil air circulation, so as to enhance mineralization of organic matter and lead to the loss of organic matter; however, plowing significantly improvedsoil alkali-hydrolyzable nitrogen and available phosphorus. Improvements of physicochemical properties in I-treatment and IP-treatment both boosted soil microbial population and activity. Microbial biomass carbon increased significantly by 327% （I-treatment） and 451% （IP-treatment）, while soil respiration increased significantly by 316% （I-treatment） and 386% （IP-treatment）. Urease and dehydrogenase activities in both I-treatment and IP-treatment were significantly higher than that in CK. Phosphatase in IP-treatment was significantly higher than that in CK. Compared to I-treatment, IP-treatment improved all of the soil properties except for soil organic matter. The key to remediation of degraded sa- line-alkaline wetlands is to decrease soil salinity and sodicity; thus, irri- gation plus plowing could be an ideal method of soil remediation.展开更多
Recently industrialization has become one of the most promising contributors for economic development of Bangladesh. However, at the same time, industrial pollution has turned into one of the major problems for human ...Recently industrialization has become one of the most promising contributors for economic development of Bangladesh. However, at the same time, industrial pollution has turned into one of the major problems for human being as well as for the environment. In order to understand the effect of textile effluent (TE) on environmental pollution, TE samples collected from North-west part of the capital of Bangladesh, Dhaka (Savar, Ashulia and Tongi area) were characterized biologically, biochemically and biophysically. Eight potential microorganisms were isolated (3 bacteria and 5 fungi) from the collected TE and two of them were used to de-colorization of TE significantly by bioremediation process. Among the various parameters checked here, some physicochemical properties like TDS, COD, BOD, DO and heavy metals like Cd and Cr were detected in quite high amounts. Altogether, our results indicate that TE is one of the serious pollutants, which could damage environment as well as water body severely.展开更多
Physicochemical properties and metal contents of five dye-based textile effluents collected in summer and winter season, 201<span style="font-family:Verdana;"><span style="font-family:Verdana;&...Physicochemical properties and metal contents of five dye-based textile effluents collected in summer and winter season, 201<span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">6</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"> from Savar, Dhaka, Bangladesh were within the recommended acceptable limit. The average value of all physicochemical parameters was found high in summer season except turbidity. A total of 94 heavy metal resistant bacteria (46 gram positive & 48 gram negative) were isolated from textile effluent sample</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">s</span></span></span><span><span><span style="font-family:;" "=""><span style="font-family:Verdana;"> and among them 17 isolates were multi metal resistant. Highest tolerance level of the isolates was shown at 10 mM concentration against Pb. All the heavy metal resistant bacterial isolates were presumably grouped into 14 genera according to mor</span><span style="font-family:Verdana;">phological and biochemical assay. Three isolates designated WFB3c</span><span style="font-family:Verdana;"> (65.41%),</span><span style="font-family:Verdana;"> WFB4g (62%) and SFB5c (60.07%) were found to potentially degrade dye as </span><span style="font-family:Verdana;">well as tolerate heavy metal</span></span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">s</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">. Three potential dye decolorizer isolates were</span></span></span><span><span><span style="font-family:;" "=""> <span><span style="font-family:Verdana;">screened out and most potential one (WFB3c) was identified as </span><i><span style="font-family:Verdana;">Proteus</span></i></span><span style="font-family:Verdana;"> <i>mirabilis</i> </span><span style="font-family:Verdana;">according to</span><span> </span><span style="font-family:Verdana;">the 16S rRNA identification.</span><span> </span><span style="font-family:Verdana;">The isolated bacterial strain </span><i><span style="font-family:Verdana;">Proteus</span></i><span style="font-family:Verdana;"> <i>mirabilis</i></span><span style="font-family:Verdana;"> would be a potential candidate for microbes based treatment to decolorize dye from textile effluents.</span></span></span></span>展开更多
Removal of Cr (VI) from aqueous solution and tannery effluent in sequence with Cr (VI) resistant microfungi (Aspergillus niger, Penicillium chrysogenum) and sawdust degraded by basidiomycete (Gloeophyllum sepiarium) w...Removal of Cr (VI) from aqueous solution and tannery effluent in sequence with Cr (VI) resistant microfungi (Aspergillus niger, Penicillium chrysogenum) and sawdust degraded by basidiomycete (Gloeophyllum sepiarium) was investigated in the laboratory. Initial or primary treatment with microfungi reduced 200 mg/l Cr (VI) in aqueous solution by 64.6% - 78.2% while a markedly lower 0.52 mg/l Cr (VI) in tannery effluent was reduced by 72.4% - 84.6%. However, the residual Cr (VI) in both aqueous solution and tannery effluent was reduced to a non-detectable level after secondary treatment by passage through basidiomycete-degraded sawdust column. The recovery of 65.4% - 87.7% of the Cr (VI) removed by treatment microfungi by elution indicated adsorption as the major mechanism for Cr (VI) removal. The microfungi reduced BOD in tannery effluent by 85.3 ± 5.6 - 92.7 ± 6.8 and concomitantly removed Cr (VI), hence it is hypothesized that non-Cr (VI) constituents of tannery effluent may have interfered with biosorption of Cr (VI) by treatment microfungi. It is concluded that the two-stage sequential treatment process may be of potential cost-saving stratagem for removal of chromium from industrial wastes.展开更多
The use of modeling and simulation has developed into a critical tool for the sustainable management of wastewater, especially when it comes to replicating the complex biochemical procedures required for fertilizer ef...The use of modeling and simulation has developed into a critical tool for the sustainable management of wastewater, especially when it comes to replicating the complex biochemical procedures required for fertilizer effluent treatment, which calls for a significant amount of wastewater-related data. The biological improvement of a urea fertilizer effluent via GPS* simulation was carried out in this work using a methodical process. Using established analytical techniques, temperature, total suspended solids (TSS), biochemical oxygen demand (BOD), total phosphorus (T/), chemical oxygen demand (COD), total nitrogen (TN), total nitrate (NO<sub>3</sub>), electric conductivity (EC), turbidity, residual chlorine, urea, NH<sub>3</sub>, and heavy metals (Cu, Cd, Cr, Pb, Ni, and Fe) were assessed. The research revealed that the measured values from the fertilizer factory outfall effluent had high concentrations of all the physicochemical water quality indicators, with the exception of TSS, PO<sub>4</sub><sup>-</sup>, SO<sub>4</sub><sup>-</sup>, and NO<sub>3</sub><sup>-</sup>. These concentrations are higher compared to the authorized limits or suggested values by the Federal Environmental Protection Agency (FEPA). To improve the therapy biologically, however, a modeling and simulation program (GPS-X, version 8.0) was used with the physicochemical information gathered from the studied sample. The results of the treated water simulation showed that the concentrations of BOD<sub>5</sub> and COD had been significantly reduced by 35% and 44%, respectively. Additionally, it was discovered that total phosphorus (TP), nitrate (N), and total nitrogen (TN) were all within the permitted FEPA limit. The results revealed good treatment performance of the wastewater with increasing concentration of acetic acid and sodium hydroxide. Hence, the results of this research work identify the need for proper treatment of fertilizer industry effluents prior to their release into the environment.展开更多
Effluents from wastewater treatment plants(WWTPs)are recognized as an important source for microplastic(MP)pollution in the receiving waters.The removal efficiency of MPs in WWTPs and the discharge flux remain largely...Effluents from wastewater treatment plants(WWTPs)are recognized as an important source for microplastic(MP)pollution in the receiving waters.The removal efficiency of MPs in WWTPs and the discharge flux remain largely unknown.The present study measured the MP abundances in the influents,effluents,and activated sludge in four domestic and one industrial WWTPs in Guangzhou,China.The MP abundance detected in influent samples were approximately one order of magnitude higher than those found in effluents,resulting in high removal efficiencies of MPs(97.4%-98.7%)in these WWTPs.A significant amount of the removed MPs deposited in the activated sludge,with abundances of MPs ranging from 7 to 888 pieces/g dry weight sludge.Microplastics remaining in effluents were discharged into the receiving river with releasing rates of ranging from(1.1±1.0)×10^(7)to(4.54±3.92)×10^(9)pieces per day.Results obtained in the present study suggest that the contribution of MPs from WWTPs to the aquatic environment is non-negligible and the application of sludge in the agricultural environment may bring additional MP pollution to agricultural soils.展开更多
As the world’s largest palm oil producer,Indonesia significantly benefits from its palm oil industry but also faces serious environmental challenges from palm oil mill effluent(POME)-a high-strength wastewater contai...As the world’s largest palm oil producer,Indonesia significantly benefits from its palm oil industry but also faces serious environmental challenges from palm oil mill effluent(POME)-a high-strength wastewater containing substantial organic matter,nutrients,suspended solids,and various chemical compounds.Sustainable and effective wastewater treatment strategies are urgently needed to address this issue.This review presents a comprehensive analysis of existing POME treatment technologies,including anaerobic digestion(AD),advanced oxidation processes(AOPs),membrane filtration,adsorption,phytoremediation,and microalgae-based systems.Each method is examined in terms of treatment efficiency,operational feasibility,and potential for imple-mentation under Indonesian conditions.While advanced processes,such as AOPs and membrane filtration,achieve high pollutant removal,they are often limited by operational costs.In contrast,biological approaches,such as AD and phytoremediation,offer both environmental benefits and economic value through the recovery of biogas,biofertilizers,and biomass.This review highlights the potential for integrating wastewater purification with resource recovery and valorization,supporting a shift toward more circular and sustainable management of POME.The insights provided are intended to guide future research,inform policy decisions,and facilitate the industrial adoption of optimized treatment systems.展开更多
Although currently,a large part of the existing buildings is considered inefficient in terms of energy,the ability to save energy consumption up to 80%has been proven in residential and commercial buildings.Also,carbo...Although currently,a large part of the existing buildings is considered inefficient in terms of energy,the ability to save energy consumption up to 80%has been proven in residential and commercial buildings.Also,carbon dioxide is one of the most important greenhouse gases contributing to climate change and is responsible for 60%of global warming.The facade of the building,as the main intermediary between the interior and exterior spaces,plays a significant role in adjusting the weather conditions and providing thermal comfort to the residents.In this research,715 different scenarios were defined with the combination of various types of construction materials,and the effect of each of these scenarios on the process of energy loss from the surface of the external walls of the building during the operation period was determined.In the end,these scenarios were compared during a one-year operation period,and the amount of energy consumption in each of these scenarios was calculated.Also,bymeasuring the amount of carbon emissions in buildings during the operation period and before that,let’s look at practical methods to reduce the effects of the construction industry on the environment.By comparing the research findings,it can be seen that the ranking of each scenario in terms of total energy consumption is not necessarily the same as the ranking of energy consumption for gas consumption or electricity consumption for the same scenario.That is,choosing the optimal scenario depends on the type of energy consumed in the building.Finally,we determined the scenarios with the lowest and highest amounts of embodied and operational carbon.In the end,we obtained the latent carbon compensation period for each scenario.This article can help designers and construction engineers optimize the energy consumption of buildings by deciding on the right materials.展开更多
This year summarizes the experience of industrialization of vacuum glazing in the past twenty years.A series of technical difficulties have been solved to start the first global mass production of high-quality vacuum ...This year summarizes the experience of industrialization of vacuum glazing in the past twenty years.A series of technical difficulties have been solved to start the first global mass production of high-quality vacuum glass.High quality means high performance and long life which are interrelated.A mass production line must be able to achieve these two requirements if it is to produce vacuum glazing products that can be accepted by the society.With a U-value of 0.4 W/m²·K based on Low-E(low emissivity)with an emissivity of 0.03 the door is wide open for further solutions.Time,gradually to improve costs,maximizes output and develops innovative solutions of advanced window and façade systems combining complete new features like smart glasses,intelligent lamella systems in hybrid VG-IG solutions changing the building world towards“Energy plus Houses”.Market demand will rapidly increase with completely new options.Cost saving means to balance additional advantages for savings against system costs of window or façade elements.Due to promotion of energy saving and emission reduction,both,subjective and objective conditions for industrialization of vacuum glasses are perfect;the building world is waiting for it,since long.There is a lot to investigate and to gain for business success.展开更多
基金Funded by the Major State Basic Research Development Program of China (973 Program)( No.2003CB615706)
文摘A selfmade positively charged nanofiltration （NF） membrane was used to treat textile dye effluent to generate water for reuse, and the factors affecting nanofiltration process such as operating pressure, feed flow and membrane cleaning were investigated. With an applied pressure of 1.0 MPa and a feed flow of 40 L/h, this NF membrane has a removal of 93.3% for CODor and a reduction of approximately 51.0% in TDS, salinity and conductivity achieving the chroma removal of 100%. The permeate obtained through this membrane is suitable for recycling. Moreover, the membrane could be reused after being cleaned with 1% NaOH solution.
基金financially supported by the National Science & Technology supporting Program of China (NO. 2010BAC68B01 NO. 2011BAC02B01)+1 种基金the Science and Technology Planning Program of Shandong Province (NO. 2008GG10006024 NO. 2008GG3NS07005)
文摘Combined with anti-waterlogging ditches, irrigation with treated paper mill effluent （TPME） and plowing were applied in this study to investigate the effects of remediation of degraded coastal sa- line-alkaline wetlands. Three treatments were employed, viz., control （CK）, irrigated with 10 cm depth of TPME （I）, and plowing to 20 cm deep before irrigating 10 cm depth ofTPME （IP）. Results show that both I-treatment and IP-treatment could improve soil structure by decreasing bulk density by 5% and 8%. Irrigation with TPME containing low salinity stimulated salts leaching instead of accumulating. With anti-waterlogging ditches, salts were drained out of soil. Irrigation with 10 cm depth of TPME lowered total soluble salts in soil and sodium adsorption ration by 33% and 8%, respective!y, but there was no significant difference compared with CK, indicating that this irrigation rate was not heavy enough to remarkably reduce so!l salinity and sodicity, Thus, in-i： gation rate should be enhanced in order to reach better effects of desalinization and desodication. Irrigation with TPME significantly increased soil organic matter, alkali-hydrolyzable nitrogen and available phosphorus due to the abundant organic matter in TPME. Plowing increased soil air circulation, so as to enhance mineralization of organic matter and lead to the loss of organic matter; however, plowing significantly improvedsoil alkali-hydrolyzable nitrogen and available phosphorus. Improvements of physicochemical properties in I-treatment and IP-treatment both boosted soil microbial population and activity. Microbial biomass carbon increased significantly by 327% （I-treatment） and 451% （IP-treatment）, while soil respiration increased significantly by 316% （I-treatment） and 386% （IP-treatment）. Urease and dehydrogenase activities in both I-treatment and IP-treatment were significantly higher than that in CK. Phosphatase in IP-treatment was significantly higher than that in CK. Compared to I-treatment, IP-treatment improved all of the soil properties except for soil organic matter. The key to remediation of degraded sa- line-alkaline wetlands is to decrease soil salinity and sodicity; thus, irri- gation plus plowing could be an ideal method of soil remediation.
文摘Recently industrialization has become one of the most promising contributors for economic development of Bangladesh. However, at the same time, industrial pollution has turned into one of the major problems for human being as well as for the environment. In order to understand the effect of textile effluent (TE) on environmental pollution, TE samples collected from North-west part of the capital of Bangladesh, Dhaka (Savar, Ashulia and Tongi area) were characterized biologically, biochemically and biophysically. Eight potential microorganisms were isolated (3 bacteria and 5 fungi) from the collected TE and two of them were used to de-colorization of TE significantly by bioremediation process. Among the various parameters checked here, some physicochemical properties like TDS, COD, BOD, DO and heavy metals like Cd and Cr were detected in quite high amounts. Altogether, our results indicate that TE is one of the serious pollutants, which could damage environment as well as water body severely.
文摘Physicochemical properties and metal contents of five dye-based textile effluents collected in summer and winter season, 201<span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">6</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;"> from Savar, Dhaka, Bangladesh were within the recommended acceptable limit. The average value of all physicochemical parameters was found high in summer season except turbidity. A total of 94 heavy metal resistant bacteria (46 gram positive & 48 gram negative) were isolated from textile effluent sample</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">s</span></span></span><span><span><span style="font-family:;" "=""><span style="font-family:Verdana;"> and among them 17 isolates were multi metal resistant. Highest tolerance level of the isolates was shown at 10 mM concentration against Pb. All the heavy metal resistant bacterial isolates were presumably grouped into 14 genera according to mor</span><span style="font-family:Verdana;">phological and biochemical assay. Three isolates designated WFB3c</span><span style="font-family:Verdana;"> (65.41%),</span><span style="font-family:Verdana;"> WFB4g (62%) and SFB5c (60.07%) were found to potentially degrade dye as </span><span style="font-family:Verdana;">well as tolerate heavy metal</span></span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">s</span></span></span><span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">. Three potential dye decolorizer isolates were</span></span></span><span><span><span style="font-family:;" "=""> <span><span style="font-family:Verdana;">screened out and most potential one (WFB3c) was identified as </span><i><span style="font-family:Verdana;">Proteus</span></i></span><span style="font-family:Verdana;"> <i>mirabilis</i> </span><span style="font-family:Verdana;">according to</span><span> </span><span style="font-family:Verdana;">the 16S rRNA identification.</span><span> </span><span style="font-family:Verdana;">The isolated bacterial strain </span><i><span style="font-family:Verdana;">Proteus</span></i><span style="font-family:Verdana;"> <i>mirabilis</i></span><span style="font-family:Verdana;"> would be a potential candidate for microbes based treatment to decolorize dye from textile effluents.</span></span></span></span>
文摘Removal of Cr (VI) from aqueous solution and tannery effluent in sequence with Cr (VI) resistant microfungi (Aspergillus niger, Penicillium chrysogenum) and sawdust degraded by basidiomycete (Gloeophyllum sepiarium) was investigated in the laboratory. Initial or primary treatment with microfungi reduced 200 mg/l Cr (VI) in aqueous solution by 64.6% - 78.2% while a markedly lower 0.52 mg/l Cr (VI) in tannery effluent was reduced by 72.4% - 84.6%. However, the residual Cr (VI) in both aqueous solution and tannery effluent was reduced to a non-detectable level after secondary treatment by passage through basidiomycete-degraded sawdust column. The recovery of 65.4% - 87.7% of the Cr (VI) removed by treatment microfungi by elution indicated adsorption as the major mechanism for Cr (VI) removal. The microfungi reduced BOD in tannery effluent by 85.3 ± 5.6 - 92.7 ± 6.8 and concomitantly removed Cr (VI), hence it is hypothesized that non-Cr (VI) constituents of tannery effluent may have interfered with biosorption of Cr (VI) by treatment microfungi. It is concluded that the two-stage sequential treatment process may be of potential cost-saving stratagem for removal of chromium from industrial wastes.
文摘The use of modeling and simulation has developed into a critical tool for the sustainable management of wastewater, especially when it comes to replicating the complex biochemical procedures required for fertilizer effluent treatment, which calls for a significant amount of wastewater-related data. The biological improvement of a urea fertilizer effluent via GPS* simulation was carried out in this work using a methodical process. Using established analytical techniques, temperature, total suspended solids (TSS), biochemical oxygen demand (BOD), total phosphorus (T/), chemical oxygen demand (COD), total nitrogen (TN), total nitrate (NO<sub>3</sub>), electric conductivity (EC), turbidity, residual chlorine, urea, NH<sub>3</sub>, and heavy metals (Cu, Cd, Cr, Pb, Ni, and Fe) were assessed. The research revealed that the measured values from the fertilizer factory outfall effluent had high concentrations of all the physicochemical water quality indicators, with the exception of TSS, PO<sub>4</sub><sup>-</sup>, SO<sub>4</sub><sup>-</sup>, and NO<sub>3</sub><sup>-</sup>. These concentrations are higher compared to the authorized limits or suggested values by the Federal Environmental Protection Agency (FEPA). To improve the therapy biologically, however, a modeling and simulation program (GPS-X, version 8.0) was used with the physicochemical information gathered from the studied sample. The results of the treated water simulation showed that the concentrations of BOD<sub>5</sub> and COD had been significantly reduced by 35% and 44%, respectively. Additionally, it was discovered that total phosphorus (TP), nitrate (N), and total nitrogen (TN) were all within the permitted FEPA limit. The results revealed good treatment performance of the wastewater with increasing concentration of acetic acid and sodium hydroxide. Hence, the results of this research work identify the need for proper treatment of fertilizer industry effluents prior to their release into the environment.
基金Supported by the National Natural Science Foundation of China(No.21936004)the Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)(No.SML2021SP208)the Fundamental Research Funds for the Central Universities(No.21623118)。
文摘Effluents from wastewater treatment plants(WWTPs)are recognized as an important source for microplastic(MP)pollution in the receiving waters.The removal efficiency of MPs in WWTPs and the discharge flux remain largely unknown.The present study measured the MP abundances in the influents,effluents,and activated sludge in four domestic and one industrial WWTPs in Guangzhou,China.The MP abundance detected in influent samples were approximately one order of magnitude higher than those found in effluents,resulting in high removal efficiencies of MPs(97.4%-98.7%)in these WWTPs.A significant amount of the removed MPs deposited in the activated sludge,with abundances of MPs ranging from 7 to 888 pieces/g dry weight sludge.Microplastics remaining in effluents were discharged into the receiving river with releasing rates of ranging from(1.1±1.0)×10^(7)to(4.54±3.92)×10^(9)pieces per day.Results obtained in the present study suggest that the contribution of MPs from WWTPs to the aquatic environment is non-negligible and the application of sludge in the agricultural environment may bring additional MP pollution to agricultural soils.
基金supporting the research project under the USK Leading Research Program-Doctoral Acceleration Scheme(PRRU-PD,Grant Number:444/UN11.2.1/PG.01.03/SPK/PTNBH/2024)coordinated by the Institute for Research and Community Services(LPPM-USK).
文摘As the world’s largest palm oil producer,Indonesia significantly benefits from its palm oil industry but also faces serious environmental challenges from palm oil mill effluent(POME)-a high-strength wastewater containing substantial organic matter,nutrients,suspended solids,and various chemical compounds.Sustainable and effective wastewater treatment strategies are urgently needed to address this issue.This review presents a comprehensive analysis of existing POME treatment technologies,including anaerobic digestion(AD),advanced oxidation processes(AOPs),membrane filtration,adsorption,phytoremediation,and microalgae-based systems.Each method is examined in terms of treatment efficiency,operational feasibility,and potential for imple-mentation under Indonesian conditions.While advanced processes,such as AOPs and membrane filtration,achieve high pollutant removal,they are often limited by operational costs.In contrast,biological approaches,such as AD and phytoremediation,offer both environmental benefits and economic value through the recovery of biogas,biofertilizers,and biomass.This review highlights the potential for integrating wastewater purification with resource recovery and valorization,supporting a shift toward more circular and sustainable management of POME.The insights provided are intended to guide future research,inform policy decisions,and facilitate the industrial adoption of optimized treatment systems.
文摘Although currently,a large part of the existing buildings is considered inefficient in terms of energy,the ability to save energy consumption up to 80%has been proven in residential and commercial buildings.Also,carbon dioxide is one of the most important greenhouse gases contributing to climate change and is responsible for 60%of global warming.The facade of the building,as the main intermediary between the interior and exterior spaces,plays a significant role in adjusting the weather conditions and providing thermal comfort to the residents.In this research,715 different scenarios were defined with the combination of various types of construction materials,and the effect of each of these scenarios on the process of energy loss from the surface of the external walls of the building during the operation period was determined.In the end,these scenarios were compared during a one-year operation period,and the amount of energy consumption in each of these scenarios was calculated.Also,bymeasuring the amount of carbon emissions in buildings during the operation period and before that,let’s look at practical methods to reduce the effects of the construction industry on the environment.By comparing the research findings,it can be seen that the ranking of each scenario in terms of total energy consumption is not necessarily the same as the ranking of energy consumption for gas consumption or electricity consumption for the same scenario.That is,choosing the optimal scenario depends on the type of energy consumed in the building.Finally,we determined the scenarios with the lowest and highest amounts of embodied and operational carbon.In the end,we obtained the latent carbon compensation period for each scenario.This article can help designers and construction engineers optimize the energy consumption of buildings by deciding on the right materials.
文摘This year summarizes the experience of industrialization of vacuum glazing in the past twenty years.A series of technical difficulties have been solved to start the first global mass production of high-quality vacuum glass.High quality means high performance and long life which are interrelated.A mass production line must be able to achieve these two requirements if it is to produce vacuum glazing products that can be accepted by the society.With a U-value of 0.4 W/m²·K based on Low-E(low emissivity)with an emissivity of 0.03 the door is wide open for further solutions.Time,gradually to improve costs,maximizes output and develops innovative solutions of advanced window and façade systems combining complete new features like smart glasses,intelligent lamella systems in hybrid VG-IG solutions changing the building world towards“Energy plus Houses”.Market demand will rapidly increase with completely new options.Cost saving means to balance additional advantages for savings against system costs of window or façade elements.Due to promotion of energy saving and emission reduction,both,subjective and objective conditions for industrialization of vacuum glasses are perfect;the building world is waiting for it,since long.There is a lot to investigate and to gain for business success.
