Based on both the spring layer interface model and the Gurtin-Murdoch surface/interface model,the anti-plane shear problem is studied for piezoelectric composites containing coated nano-elliptical fibers with imperfec...Based on both the spring layer interface model and the Gurtin-Murdoch surface/interface model,the anti-plane shear problem is studied for piezoelectric composites containing coated nano-elliptical fibers with imperfect interfaces.By using the complex function method and the technique of conformal mapping,the exact solutions of the electroelastic fields in fiber,coating,and matrix of piezoelectric nanocomposites are derived under far-field anti-plane mechanical and in-plane electrical loads.Furthermore,the generalized self-consistent method is used to accurately predict the effective electroelastic moduli of the piezoelectric nanocomposites containing coated nano-elliptical fibers with imperfect interfaces.Numerical examples are illustrated to show the effects of the material constants of the imperfect interface layers,the aspect ratio of the fiber section,and the fiber volume fraction on the effective electroelastic moduli of the piezoelectric nanocomposites.The results indicate that the effective electroelastic moduli of the piezoelectric nanocomposites can be significantly reduced by the interfacial debonding,but it can be improved by the surface/interface stresses at the small scale,which provides important theoretical reference for the design and optimization of piezoelectric nanodevices and nanostructures.展开更多
This study focused on investigating the effects of various factors on the mechanical properties of superconducting matrix composites reinforced with ferromagnetic particles and interface phases when exposed to externa...This study focused on investigating the effects of various factors on the mechanical properties of superconducting matrix composites reinforced with ferromagnetic particles and interface phases when exposed to external magnetic fields.A micromechanical model was created by simplifying the basic properties and composition of the interface,utilizing principles such as Eshelby’s equivalent inclusion theory and Hooke’s law,as well as applying uniform stress boundary conditions.Through the development of equations,the study predicted changes in effective mechanical properties,highlighting the significant influence of parameters like the interface phase,inclusions,and magnetic field on the effective elastic modulus and magnetostriction of the composite material.By shedding light on these relationships,the research offers valuable insights for the manufacture and application of ferromagnetic particle-reinforced superconducting matrix composites with interface phases,providing a foundation for future research in this area.展开更多
The combined self-consistent and Mori-Tanaka approach proposed for the evaluation of the effective elastic property of particulate composites is extended to evMuate the effective elastoplastic property of particulate ...The combined self-consistent and Mori-Tanaka approach proposed for the evaluation of the effective elastic property of particulate composites is extended to evMuate the effective elastoplastic property of particulate composites. Suppose there are sufficient identical particle inclusions with total volume fraction c in a representative volume element （RVE） of a particulate composite, these inclusions are separated into two groups, with volume fractions （1 -A-1）c and c/A over the RVE, respectively. We assume that the first group of inclusions has already been embedded in the original matrix to form a fictitious matrix, and the RVE of the composite consists of the fictitious matrix and the second group of particle inclusions. The property of the fictitious matrix is determined by the conventional self-consistent scheme, while the effective elastoplastic property of the composite is determined by the conventional Mori-Tanaka scheme. Analysis shows that, the conventional Mori-Tanaka scheme and self-consistent scheme can be obtained as the two limit cases of the extended approach as A = 1 and A = c~, respectively. The constitutive behavior of the inclusions in either Group I or Group II is identical, indicating the consistency in the description of the constitutive behavior in the two steps. ~klrthermore, the effective elastoplastic behavior of some typical particulate composites is analyzed, and the satisfactory agreement between the computational and experimental results demonstrates the validity of the extended approach. The introduced A can serve reasonably as a parameter, which is related to the actual property of composites and can be identified by experiments, for a more accurate evaluation of the effective elastoplastic property of particulate composites.展开更多
Representative volume element （RVE） method and asymptotic homogenization （AH） method are two widely used methods in predicting effective properties of pe- riodic materials. This paper develops a novel implementa- ...Representative volume element （RVE） method and asymptotic homogenization （AH） method are two widely used methods in predicting effective properties of pe- riodic materials. This paper develops a novel implementa- tion of the AH method, which has rigorous mathematical foundation of the AH method, and also simplicity as the RVE method. This implementation can be easily realized using commercial software as a black box, and can use all kinds of elements available in commercial software to model unit cells with rather complicated microstructures, so the model may remain a fairly small scale. Several examples were car- fled out to demonstrate the simplicity and effectiveness of the new implementation.展开更多
The influences of interphase on dynamic effective properties of composites reinforced by randomly dispersed spherical particles were studied. A thin homogeneous elastic interphase with different shear and bulk moduli,...The influences of interphase on dynamic effective properties of composites reinforced by randomly dispersed spherical particles were studied. A thin homogeneous elastic interphase with different shear and bulk moduli, located between the reinforced particle and the host matrix, was introduced to model the interfacial bonding state. The effects of such an interphase on the coherent plane waves were studied numerically. Numerical simulations were carried out for SiC-Al composites with four typical cases of interphase. It was found that the property of interphase has significant influences on the effective propagation constants of coherent waves and the dynamic effective elastic moduli of the composites. The influences on the coherent longitudinal wave and the coherent shear waves were different and dependent upon the frequency range. Moreover, several imperfect interface models, i.e., the spring model, mass model, and spring-mass model, were studied numerically and compared with the interphase model, It was found that the spring model is a more suitable model than the mass model for the light and weak interphase whereas the mass model is a more suitable model than the spring model for the heavy and strong interphase.展开更多
The closed-form solutions of the dynamic problem of heterogeneous piezoelectric materials are formulated by introducing polarizations into a reference medium and using the generalized reciprocity theorem.These solutio...The closed-form solutions of the dynamic problem of heterogeneous piezoelectric materials are formulated by introducing polarizations into a reference medium and using the generalized reciprocity theorem.These solutions can be reduced to the ones of an elastodynamic problem.Based on the effective medium method,these closedform solutions can be used to establish the self-consistent equations about the frequencydependent effective parameters,which can be numerically solved by iteration.Theoretical predictions are compared with the experimental results,and good agreement can be found.Furthermore,the analyses on the effects of microstructure and wavelength on the effective properties,resonance frequencies,and attenuation are also presented,which may provide some guidance for the microstructure design and analysis of piezoelectric composites.展开更多
The present study aims at developing a new method-RandomMicrostructure Finite Element Method (RMFEM) for the effectiveproperties of com- Posite materials. In this method, a randommicrostructure Model is used to simula...The present study aims at developing a new method-RandomMicrostructure Finite Element Method (RMFEM) for the effectiveproperties of com- Posite materials. In this method, a randommicrostructure Model is used to simulate the microstructure of thereal composite materials. The physical fields in such a randomMicrosturucture model under specified boundary and initial Conditionsare analyzed by finite element method.展开更多
Some theoretical methods have been reported to deal with nonlinear problems of composite materials but the accuracy is not so good. In the meantime, a lot of linear problems are difficult to be managed by the theoreti...Some theoretical methods have been reported to deal with nonlinear problems of composite materials but the accuracy is not so good. In the meantime, a lot of linear problems are difficult to be managed by the theoretical methods. The present study aims to use the developed method, the random microstructure finite element method, to deal with these nonlinear problems. In this paper, the random microstructure finite element method is used to deal with all three kinds of nonlinear property problems of composite materials. The analyzed results suggest the influences of the nonlinear phenomena on the effective properties of composite materials are significant and the random microstructure finite element method is an effective tool to investigate the nonlinear problems.展开更多
The frequency-dependent dynamic effective properties (phase velocity, attenuation and elastic modulus) of porous materials are studied numerically. The coherent plane longitudinal and shear wave equations, which are o...The frequency-dependent dynamic effective properties (phase velocity, attenuation and elastic modulus) of porous materials are studied numerically. The coherent plane longitudinal and shear wave equations, which are obtained by averaging on the multiple scattering fields, are used to evaluate the frequency-dependent dynamic effective properties of a porous material. It is found that the prediction of the dynamic effective properties includes the size effects of voids which are not included in most prediction of the traditional static effective properties. The prediction of the dynamic effective elastic modulus at a relatively low frequency range is compared with that of the traditional static effective elastic modulus, and the dynamic effective elastic modulus is found to be very close to the Hashin-Shtrikman upper bound.展开更多
A homogenization theory is developed to predict the influence of spherical inclusions on the effective thermoelectric properties of thermoelectric composite materials based on the general principles of thermodynamics ...A homogenization theory is developed to predict the influence of spherical inclusions on the effective thermoelectric properties of thermoelectric composite materials based on the general principles of thermodynamics and Mori-Tanaka method.The closed-form solutions of effective Seebeck coefficient,electric conductivity,heat conductivity,and figure of merit for such thermoelectric materials are obtained by solving the nonlinear coupled transport equations of electricity and heat.It is found that the effective figure of merit of thermoelectric material containing spherical inclusions can be higher than that of each constituent in the absence of size effect and interface effect.Some interesting examples of actual thermoelectric composites with spherical inclusions,such as insulated cavities,inclusions subjected to conductive electric and heat exchange and thermoelectric inclusions,are considered,and the numerical results lead to the conclusion that considerable enhancement of the effective figure of merit is achievable by introducing inclusions.In this paper,we provide a theoretical foundation for analytically and computationally treating the thermoelectric composites with more complicated inclusion structures,and thus pointing out a new route to their design and optimization.展开更多
Due to the large quasi-piezoelectric d33 coefficient in the film thickness direction, cellular piezoelectret has emerged as a new kind of compliant electromechanical transducer materials. The macroscopic piezoelectric...Due to the large quasi-piezoelectric d33 coefficient in the film thickness direction, cellular piezoelectret has emerged as a new kind of compliant electromechanical transducer materials. The macroscopic piezoelectric effect of cellular piezoelectret is closely related to the void microstructures as well as the material constants of host polymer. Complex void microstmctures are usually encountered in the optimum design of cellular piezoelectret polymer film with ad- vanced piezoelectric properties. Analysis of the effective electromechanical properties is generally needed. This article presents an overview of the recent progress on theoretical models and numerical simulation for the effective electromechanical properties of cellular piezoelectret. Emphasis is placed on our own works of cellular piezoelectret published in past several years.展开更多
The paper describes use of self-consistent finite element method (SCFEM) for predicting effective properties of fiber composite with partially debonded interface. The effective longitudinal Young's modulus and she...The paper describes use of self-consistent finite element method (SCFEM) for predicting effective properties of fiber composite with partially debonded interface. The effective longitudinal Young's modulus and shear modulus for unidirectional fiber reinforced composites with fiber-end cracks are calculated. Numerical results show that the effective properties are considerably influenced by the fiber-end cracks. The effects of microstructural parameters, such as fiber volume fraction, modulus ratio of the constituents and fiber aspect, on the effective properties of the composites were discussed.展开更多
Seismic prediction of cracks is of great significance in many disciplines,for which the rock physics model is indispensable.However,up to now,multitudinous analytical models focus primarily on the cracked rock with th...Seismic prediction of cracks is of great significance in many disciplines,for which the rock physics model is indispensable.However,up to now,multitudinous analytical models focus primarily on the cracked rock with the isotropic background,while the explicit model for the cracked rock with the anisotropic background is rarely investigated in spite of such case being often encountered in the earth.Hence,we first studied dependences of the crack opening displacement tensors on the crack dip angle in the coordinate systems formed by symmetry planes of the crack and the background anisotropy,respectively,by forty groups of numerical experiments.Based on the conclusion from the experiments,the analytical solution was derived for the effective elastic properties of the rock with the inclined penny-shaped cracks in the transversely isotropic background.Further,we comprehensively analyzed,according to the developed model,effects of the crack dip angle,background anisotropy,filling fluid and crack density on the effective elastic properties of the cracked rock.The analysis results indicate that the dip angle and background anisotropy can significantly either enhance or weaken the anisotropy degrees of the P-and SH-wave velocities,whereas they have relatively small effects on the SV-wave velocity anisotropy.Moreover,the filling fluid can increase the stiffness coefficients related to the compressional modulus by reducing crack compliance parameters,while its effects on shear coefficients depend on the crack dip angle.The increasing crack density reduces velocities of the dry rock,and decreasing rates of the velocities are affected by the crack dip angle.By comparing with exact numerical results and experimental data,it was demonstrated that the proposed model can achieve high-precision estimations of stiffness coefficients.Moreover,the assumption of the weakly anisotropic background results in the consistency between the proposed model and Hudson's published theory for the orthorhombic rock.展开更多
The rate of hydrothermal reaction of SiO_2 and/or A1_2O_3 in the system of CaO-Al_2O_3-SiO_2-H_2O at 200℃ and the factors which influence the reactions are investigated by determining the reaction ratio.The rate of r...The rate of hydrothermal reaction of SiO_2 and/or A1_2O_3 in the system of CaO-Al_2O_3-SiO_2-H_2O at 200℃ and the factors which influence the reactions are investigated by determining the reaction ratio.The rate of reactions depends on the reactive activities of raw materials, initial composition of mixture and relative activity of SiO_2 and A12O3. The hydrothermal reaction can be accelerated by sodium hydroxide,in the case of silica,which has low activity, this is quite obvious.展开更多
We utilize the effective field theory approach to study the properties of the axion. In particular, with s as well as u and d quarks regarded to be relatively light we derive a formula for the mass of the axion; a rou...We utilize the effective field theory approach to study the properties of the axion. In particular, with s as well as u and d quarks regarded to be relatively light we derive a formula for the mass of the axion; a rough estimate of the rate for its dominant decay mode at low energy is also carried out.展开更多
A fast multipole method(FMM)is applied for BEM to reduce both the operation and memory requirement in dealing with very large scale problems.In this paper,a new version of fast multipole BEM for 2D elastostatics is pr...A fast multipole method(FMM)is applied for BEM to reduce both the operation and memory requirement in dealing with very large scale problems.In this paper,a new version of fast multipole BEM for 2D elastostatics is presented and used for simulation of 2D elastic solid with a large number of randomly distributed inclusions combined with a similar subregion approach.Generalized minimum residual method(GMRES)is used as an iterative solver to solve the equation system formed by BEM iteratively.The numerical results show that the scheme presented is applicable to certain large scale problems.展开更多
A semi-analytical finite element method(SAFEM),based on the two-scale asymptotic homogenization method(AHM)and the finite element method(FEM),is implemented to obtain the effective properties of two-phase fiber-reinfo...A semi-analytical finite element method(SAFEM),based on the two-scale asymptotic homogenization method(AHM)and the finite element method(FEM),is implemented to obtain the effective properties of two-phase fiber-reinforced composites(FRCs).The fibers are periodically distributed and unidirectionally aligned in a homogeneous matrix.This framework addresses the static linear elastic micropolar problem through partial differential equations,subject to boundary conditions and perfect interface contact conditions.The mathematical formulation of the local problems and the effective coefficients are presented by the AHM.The local problems obtained from the AHM are solved by the FEM,which is denoted as the SAFEM.The numerical results are provided,and the accuracy of the solutions is analyzed,indicating that the formulas and results obtained with the SAFEM may serve as the reference points for validating the outcomes of experimental and numerical computations.展开更多
This paper presents a novel topology optimization method to design graded lattice structures to minimize the volume subject to displacement constraints based on the independent continuous mapping(ICM)method.First,the ...This paper presents a novel topology optimization method to design graded lattice structures to minimize the volume subject to displacement constraints based on the independent continuous mapping(ICM)method.First,the effective elastic properties of graded unit cells are analyzed by the strain energy-based homogenization method.A surrogate model using quartic polynomial interpolation is built to map the independent continuous topological variable to the effective elastic matrix of the unit cell and set up the relationship between the macroscale structure and microscale unit cells.Second,a lightweight topology optimization model is established,which can be transformed into an explicitly standard quadratic programming problem by sensitivity analysis and solved by dual sequential quadratic programming.Third,several numerical examples demonstrate that graded lattice structures have a better lightweight effect than uniform lattice structures,which validates the effectiveness and feasibility of the proposed method.The results show that graded lattice structures become lighter with increasing displacement constraints.In addition,some diverse topological configurations are obtained.This method provides a reference for the graded lattice structure design and expands the application of the ICM method.展开更多
In this paper,a Voronoi cell finite element model is developed to study the microscopic and macroscopic mechanical behaviors of heterogenous materials,including arbitrary distributed heterogeneity(inclusions or fibers...In this paper,a Voronoi cell finite element model is developed to study the microscopic and macroscopic mechanical behaviors of heterogenous materials,including arbitrary distributed heterogeneity(inclusions or fibers)coated with interphase layers,based on linear elasticity theory.The interphase between heterogeneity and a matrix are regarded as in the third phase(elastic layers),in contrast to the perfect interface of the spring-like Voronoi cell finite element model(VCFEM)in the literature.In this model,both stress and the displacement field are assumed to be independent in an element.Formulations of stress are derived for each of the three phases in an element,as is the type of functional.Numerical examples were used to study the microscopic and macroscopic properties,such as the effective modulus,of the composites.The results of the proposed VCFEM were compared with analytical solution and numerical results obtained from a standard finite element analysis to confirm its effectiveness.展开更多
Explicit expressions of Mori-Tanaka＇s tensor for a transversely isotropic fiber rein- forced UD composite are presented. Closed-form formulae for the effective elastic properties of the composite are obtained. In a 3...Explicit expressions of Mori-Tanaka＇s tensor for a transversely isotropic fiber rein- forced UD composite are presented. Closed-form formulae for the effective elastic properties of the composite are obtained. In a 3D sense, the resulting compliance tensor of the composite is symmetric. Nevertheless, the 2D compliance tensor based on a deteriorated Mori-Tanaka＇s tensor is not symmetric. Nor is the compliance tensor defined upon a deteriorated 2D Eshelby＇s tensor. The in-plane effective elastic properties given by those three approaches are different. A detailed comparison between the predicted results obtained from those approaches with experimental data available for a number of UD composites is made.展开更多
基金supported by the National Natural Science Foundation of China(Nos.12072166 and 11862021)the Program for Science and Technology of Inner Mongolia Autonomous Region of China(No.2021GG0254)+1 种基金the Natural Science Foundation of Inner Mongolia Autonomous Region of China(No.2020MS01006)the Independent Research Key Program of Center for Applied Mathematics of Inner Mongolia Autonomous Region of China(No.ZZYJZD2022002)。
文摘Based on both the spring layer interface model and the Gurtin-Murdoch surface/interface model,the anti-plane shear problem is studied for piezoelectric composites containing coated nano-elliptical fibers with imperfect interfaces.By using the complex function method and the technique of conformal mapping,the exact solutions of the electroelastic fields in fiber,coating,and matrix of piezoelectric nanocomposites are derived under far-field anti-plane mechanical and in-plane electrical loads.Furthermore,the generalized self-consistent method is used to accurately predict the effective electroelastic moduli of the piezoelectric nanocomposites containing coated nano-elliptical fibers with imperfect interfaces.Numerical examples are illustrated to show the effects of the material constants of the imperfect interface layers,the aspect ratio of the fiber section,and the fiber volume fraction on the effective electroelastic moduli of the piezoelectric nanocomposites.The results indicate that the effective electroelastic moduli of the piezoelectric nanocomposites can be significantly reduced by the interfacial debonding,but it can be improved by the surface/interface stresses at the small scale,which provides important theoretical reference for the design and optimization of piezoelectric nanodevices and nanostructures.
基金supported by the National Natural Science Foundation of China(No.12262020).
文摘This study focused on investigating the effects of various factors on the mechanical properties of superconducting matrix composites reinforced with ferromagnetic particles and interface phases when exposed to external magnetic fields.A micromechanical model was created by simplifying the basic properties and composition of the interface,utilizing principles such as Eshelby’s equivalent inclusion theory and Hooke’s law,as well as applying uniform stress boundary conditions.Through the development of equations,the study predicted changes in effective mechanical properties,highlighting the significant influence of parameters like the interface phase,inclusions,and magnetic field on the effective elastic modulus and magnetostriction of the composite material.By shedding light on these relationships,the research offers valuable insights for the manufacture and application of ferromagnetic particle-reinforced superconducting matrix composites with interface phases,providing a foundation for future research in this area.
基金Project supported by the National Natural Science Foundation of China-NSAF (No. 10976032)Japan Society for the Promotion of Science (No. L08538)
文摘The combined self-consistent and Mori-Tanaka approach proposed for the evaluation of the effective elastic property of particulate composites is extended to evMuate the effective elastoplastic property of particulate composites. Suppose there are sufficient identical particle inclusions with total volume fraction c in a representative volume element （RVE） of a particulate composite, these inclusions are separated into two groups, with volume fractions （1 -A-1）c and c/A over the RVE, respectively. We assume that the first group of inclusions has already been embedded in the original matrix to form a fictitious matrix, and the RVE of the composite consists of the fictitious matrix and the second group of particle inclusions. The property of the fictitious matrix is determined by the conventional self-consistent scheme, while the effective elastoplastic property of the composite is determined by the conventional Mori-Tanaka scheme. Analysis shows that, the conventional Mori-Tanaka scheme and self-consistent scheme can be obtained as the two limit cases of the extended approach as A = 1 and A = c~, respectively. The constitutive behavior of the inclusions in either Group I or Group II is identical, indicating the consistency in the description of the constitutive behavior in the two steps. ~klrthermore, the effective elastoplastic behavior of some typical particulate composites is analyzed, and the satisfactory agreement between the computational and experimental results demonstrates the validity of the extended approach. The introduced A can serve reasonably as a parameter, which is related to the actual property of composites and can be identified by experiments, for a more accurate evaluation of the effective elastoplastic property of particulate composites.
基金supported by the National Natural Science Foundation of China(91216201)
文摘Representative volume element （RVE） method and asymptotic homogenization （AH） method are two widely used methods in predicting effective properties of pe- riodic materials. This paper develops a novel implementa- tion of the AH method, which has rigorous mathematical foundation of the AH method, and also simplicity as the RVE method. This implementation can be easily realized using commercial software as a black box, and can use all kinds of elements available in commercial software to model unit cells with rather complicated microstructures, so the model may remain a fairly small scale. Several examples were car- fled out to demonstrate the simplicity and effectiveness of the new implementation.
基金This work was financially supported by the National Natural Science Foundation of China (No.10272003) and the Talent Foundationof University of Science & Technology Beijing.
文摘The influences of interphase on dynamic effective properties of composites reinforced by randomly dispersed spherical particles were studied. A thin homogeneous elastic interphase with different shear and bulk moduli, located between the reinforced particle and the host matrix, was introduced to model the interfacial bonding state. The effects of such an interphase on the coherent plane waves were studied numerically. Numerical simulations were carried out for SiC-Al composites with four typical cases of interphase. It was found that the property of interphase has significant influences on the effective propagation constants of coherent waves and the dynamic effective elastic moduli of the composites. The influences on the coherent longitudinal wave and the coherent shear waves were different and dependent upon the frequency range. Moreover, several imperfect interface models, i.e., the spring model, mass model, and spring-mass model, were studied numerically and compared with the interphase model, It was found that the spring model is a more suitable model than the mass model for the light and weak interphase whereas the mass model is a more suitable model than the spring model for the heavy and strong interphase.
基金Project supported by the National Natural Science Foundation of China(No.12072240)。
文摘The closed-form solutions of the dynamic problem of heterogeneous piezoelectric materials are formulated by introducing polarizations into a reference medium and using the generalized reciprocity theorem.These solutions can be reduced to the ones of an elastodynamic problem.Based on the effective medium method,these closedform solutions can be used to establish the self-consistent equations about the frequencydependent effective parameters,which can be numerically solved by iteration.Theoretical predictions are compared with the experimental results,and good agreement can be found.Furthermore,the analyses on the effects of microstructure and wavelength on the effective properties,resonance frequencies,and attenuation are also presented,which may provide some guidance for the microstructure design and analysis of piezoelectric composites.
基金the National Science Foundation of China under the Grant 19772037 and 19902014
文摘The present study aims at developing a new method-RandomMicrostructure Finite Element Method (RMFEM) for the effectiveproperties of com- Posite materials. In this method, a randommicrostructure Model is used to simulate the microstructure of thereal composite materials. The physical fields in such a randomMicrosturucture model under specified boundary and initial Conditionsare analyzed by finite element method.
基金This work is supported by the National Natural Science Foundation of China under the Grant 19772037 and 19902014
文摘Some theoretical methods have been reported to deal with nonlinear problems of composite materials but the accuracy is not so good. In the meantime, a lot of linear problems are difficult to be managed by the theoretical methods. The present study aims to use the developed method, the random microstructure finite element method, to deal with these nonlinear problems. In this paper, the random microstructure finite element method is used to deal with all three kinds of nonlinear property problems of composite materials. The analyzed results suggest the influences of the nonlinear phenomena on the effective properties of composite materials are significant and the random microstructure finite element method is an effective tool to investigate the nonlinear problems.
基金This work was financially supported by the National Natural Science Foundation of China (No.10272003, No. 10032010, and No. 10372004) the Talent Foundation of the University of Sciences and Technology Beijing.
文摘The frequency-dependent dynamic effective properties (phase velocity, attenuation and elastic modulus) of porous materials are studied numerically. The coherent plane longitudinal and shear wave equations, which are obtained by averaging on the multiple scattering fields, are used to evaluate the frequency-dependent dynamic effective properties of a porous material. It is found that the prediction of the dynamic effective properties includes the size effects of voids which are not included in most prediction of the traditional static effective properties. The prediction of the dynamic effective elastic modulus at a relatively low frequency range is compared with that of the traditional static effective elastic modulus, and the dynamic effective elastic modulus is found to be very close to the Hashin-Shtrikman upper bound.
基金Project supported by the Ningbo Natural Science Foundation,China(Grant Nos.2019A610151 and 2018A610081)the Natural Science Foundation of Zhejiang Province,China(Grant Nos.LY17A020001 and LY20A020002)+1 种基金the National Natural Science Foundation of China(Grant No.11402063)the K C Wong Magna Fund in Ningbo University,China.
文摘A homogenization theory is developed to predict the influence of spherical inclusions on the effective thermoelectric properties of thermoelectric composite materials based on the general principles of thermodynamics and Mori-Tanaka method.The closed-form solutions of effective Seebeck coefficient,electric conductivity,heat conductivity,and figure of merit for such thermoelectric materials are obtained by solving the nonlinear coupled transport equations of electricity and heat.It is found that the effective figure of merit of thermoelectric material containing spherical inclusions can be higher than that of each constituent in the absence of size effect and interface effect.Some interesting examples of actual thermoelectric composites with spherical inclusions,such as insulated cavities,inclusions subjected to conductive electric and heat exchange and thermoelectric inclusions,are considered,and the numerical results lead to the conclusion that considerable enhancement of the effective figure of merit is achievable by introducing inclusions.In this paper,we provide a theoretical foundation for analytically and computationally treating the thermoelectric composites with more complicated inclusion structures,and thus pointing out a new route to their design and optimization.
基金supported by National Natural Science Foundation of China (11072179,11090334)Shanghai Leading Academic Discipline Project (B302)
文摘Due to the large quasi-piezoelectric d33 coefficient in the film thickness direction, cellular piezoelectret has emerged as a new kind of compliant electromechanical transducer materials. The macroscopic piezoelectric effect of cellular piezoelectret is closely related to the void microstructures as well as the material constants of host polymer. Complex void microstmctures are usually encountered in the optimum design of cellular piezoelectret polymer film with ad- vanced piezoelectric properties. Analysis of the effective electromechanical properties is generally needed. This article presents an overview of the recent progress on theoretical models and numerical simulation for the effective electromechanical properties of cellular piezoelectret. Emphasis is placed on our own works of cellular piezoelectret published in past several years.
基金The project supported by the National Natural Science Foundation of China
文摘The paper describes use of self-consistent finite element method (SCFEM) for predicting effective properties of fiber composite with partially debonded interface. The effective longitudinal Young's modulus and shear modulus for unidirectional fiber reinforced composites with fiber-end cracks are calculated. Numerical results show that the effective properties are considerably influenced by the fiber-end cracks. The effects of microstructural parameters, such as fiber volume fraction, modulus ratio of the constituents and fiber aspect, on the effective properties of the composites were discussed.
基金We would like to acknowledge all the reviewers and editors and the sponsorship of National Natural Science Foundation of China(42030103)the Marine S&T Fund of Shandong Province for Pilot National Laboratory for Marine Science and Technology(Qingdao)(2021QNLM020001-6)the Laoshan National Laboratory of Science and Technology Foundation(LSKJ202203400).
文摘Seismic prediction of cracks is of great significance in many disciplines,for which the rock physics model is indispensable.However,up to now,multitudinous analytical models focus primarily on the cracked rock with the isotropic background,while the explicit model for the cracked rock with the anisotropic background is rarely investigated in spite of such case being often encountered in the earth.Hence,we first studied dependences of the crack opening displacement tensors on the crack dip angle in the coordinate systems formed by symmetry planes of the crack and the background anisotropy,respectively,by forty groups of numerical experiments.Based on the conclusion from the experiments,the analytical solution was derived for the effective elastic properties of the rock with the inclined penny-shaped cracks in the transversely isotropic background.Further,we comprehensively analyzed,according to the developed model,effects of the crack dip angle,background anisotropy,filling fluid and crack density on the effective elastic properties of the cracked rock.The analysis results indicate that the dip angle and background anisotropy can significantly either enhance or weaken the anisotropy degrees of the P-and SH-wave velocities,whereas they have relatively small effects on the SV-wave velocity anisotropy.Moreover,the filling fluid can increase the stiffness coefficients related to the compressional modulus by reducing crack compliance parameters,while its effects on shear coefficients depend on the crack dip angle.The increasing crack density reduces velocities of the dry rock,and decreasing rates of the velocities are affected by the crack dip angle.By comparing with exact numerical results and experimental data,it was demonstrated that the proposed model can achieve high-precision estimations of stiffness coefficients.Moreover,the assumption of the weakly anisotropic background results in the consistency between the proposed model and Hudson's published theory for the orthorhombic rock.
基金National H-Tech Program under contract 863-7152101
文摘The rate of hydrothermal reaction of SiO_2 and/or A1_2O_3 in the system of CaO-Al_2O_3-SiO_2-H_2O at 200℃ and the factors which influence the reactions are investigated by determining the reaction ratio.The rate of reactions depends on the reactive activities of raw materials, initial composition of mixture and relative activity of SiO_2 and A12O3. The hydrothermal reaction can be accelerated by sodium hydroxide,in the case of silica,which has low activity, this is quite obvious.
基金Supported by the National Natural Science Foundation of China under Grant No 11175088
文摘We utilize the effective field theory approach to study the properties of the axion. In particular, with s as well as u and d quarks regarded to be relatively light we derive a formula for the mass of the axion; a rough estimate of the rate for its dominant decay mode at low energy is also carried out.
基金The project supported by the National Nature Science Foundation of China(10172053)the Ministry of Education
文摘A fast multipole method(FMM)is applied for BEM to reduce both the operation and memory requirement in dealing with very large scale problems.In this paper,a new version of fast multipole BEM for 2D elastostatics is presented and used for simulation of 2D elastic solid with a large number of randomly distributed inclusions combined with a similar subregion approach.Generalized minimum residual method(GMRES)is used as an iterative solver to solve the equation system formed by BEM iteratively.The numerical results show that the scheme presented is applicable to certain large scale problems.
基金Project supported by the National Council of Humanities,Sciences,and Technologies of Mexico(Nos.CF-2023-G-792 and CF-2023-G-1458)the National Council for Scientific and Technological Development of Brazil(No.09/2023)the Research on Productivity of Brazil(No.307188/2023-0)。
文摘A semi-analytical finite element method(SAFEM),based on the two-scale asymptotic homogenization method(AHM)and the finite element method(FEM),is implemented to obtain the effective properties of two-phase fiber-reinforced composites(FRCs).The fibers are periodically distributed and unidirectionally aligned in a homogeneous matrix.This framework addresses the static linear elastic micropolar problem through partial differential equations,subject to boundary conditions and perfect interface contact conditions.The mathematical formulation of the local problems and the effective coefficients are presented by the AHM.The local problems obtained from the AHM are solved by the FEM,which is denoted as the SAFEM.The numerical results are provided,and the accuracy of the solutions is analyzed,indicating that the formulas and results obtained with the SAFEM may serve as the reference points for validating the outcomes of experimental and numerical computations.
基金the National Natural Science Foundation of China(Grant No.11872080)Beijing Natural Science Foundation(Grant No.3192005)Taishan University Youth Teacher Science Foundation(Grant No.QN-01-201901).
文摘This paper presents a novel topology optimization method to design graded lattice structures to minimize the volume subject to displacement constraints based on the independent continuous mapping(ICM)method.First,the effective elastic properties of graded unit cells are analyzed by the strain energy-based homogenization method.A surrogate model using quartic polynomial interpolation is built to map the independent continuous topological variable to the effective elastic matrix of the unit cell and set up the relationship between the macroscale structure and microscale unit cells.Second,a lightweight topology optimization model is established,which can be transformed into an explicitly standard quadratic programming problem by sensitivity analysis and solved by dual sequential quadratic programming.Third,several numerical examples demonstrate that graded lattice structures have a better lightweight effect than uniform lattice structures,which validates the effectiveness and feasibility of the proposed method.The results show that graded lattice structures become lighter with increasing displacement constraints.In addition,some diverse topological configurations are obtained.This method provides a reference for the graded lattice structure design and expands the application of the ICM method.
基金supported by the National Natural Science Foundation of China(Grants 11402103 and 11572142).
文摘In this paper,a Voronoi cell finite element model is developed to study the microscopic and macroscopic mechanical behaviors of heterogenous materials,including arbitrary distributed heterogeneity(inclusions or fibers)coated with interphase layers,based on linear elasticity theory.The interphase between heterogeneity and a matrix are regarded as in the third phase(elastic layers),in contrast to the perfect interface of the spring-like Voronoi cell finite element model(VCFEM)in the literature.In this model,both stress and the displacement field are assumed to be independent in an element.Formulations of stress are derived for each of the three phases in an element,as is the type of functional.Numerical examples were used to study the microscopic and macroscopic properties,such as the effective modulus,of the composites.The results of the proposed VCFEM were compared with analytical solution and numerical results obtained from a standard finite element analysis to confirm its effectiveness.
基金supported by the National Natural Science Foundation of China(No.11272238)Doctoral Fund of Ministry of Education of China(No.20120072110036)
文摘Explicit expressions of Mori-Tanaka＇s tensor for a transversely isotropic fiber rein- forced UD composite are presented. Closed-form formulae for the effective elastic properties of the composite are obtained. In a 3D sense, the resulting compliance tensor of the composite is symmetric. Nevertheless, the 2D compliance tensor based on a deteriorated Mori-Tanaka＇s tensor is not symmetric. Nor is the compliance tensor defined upon a deteriorated 2D Eshelby＇s tensor. The in-plane effective elastic properties given by those three approaches are different. A detailed comparison between the predicted results obtained from those approaches with experimental data available for a number of UD composites is made.
