It is known that eddy current effect has a great influence on magnetic flux leakage testing(MFL).Usually,contacttype encoder wheels are used to measure MFL testing speed to evaluate the effect and further compensate t...It is known that eddy current effect has a great influence on magnetic flux leakage testing(MFL).Usually,contacttype encoder wheels are used to measure MFL testing speed to evaluate the effect and further compensate testing signals.This speed measurement method is complicated,and inevitable abrasion and occasional slippage will reduce the measurement accuracy.In order to solve this problem,based on eddy current effect due to the relative movement,a speed measurement method is proposed,which is contactless and simple.In the high-speed MFL testing,eddy current induced in the specimen will cause an obvious modification to the applied field.This modified field,which is measured by Hall sensor,can be utilized to reflect the moving speed.Firstly,the measurement principle is illustrated based on Faraday’s law.Then,dynamic finite element simulations are conducted to investigate the modified magnetic field distribution.Finally,laboratory experiments are performed to validate the feasibility of the proposed method.The results show that Bmz(r1)and Bmx(r2)have a linear relation with moving speed,which could be used as an alternative measurement parameter.展开更多
The effect from the interaction of the alternating current(AC)magnetic field with kilogram-level test mass(TM)limits the detectivity of the TianQin space-based gravitational wave detection.The quantifed effect require...The effect from the interaction of the alternating current(AC)magnetic field with kilogram-level test mass(TM)limits the detectivity of the TianQin space-based gravitational wave detection.The quantifed effect requires the determination of the AC magnetic susceptibilityχ(f)of the TM.A torque method is proposed to measure theχ(f)of kg-level samples at the mHz band with a precision of 1×10^(-7).Combined with our previous work[Phys.Rev.Appl.18044010(2022)],the general frequency-dependent susceptibility of the alloy cube with side length L and electrical conductivityσis determined asχ(f)=χ0+(0.24±0.01)σμ0L^(2)f from 0.1 mHz to 1 Hz.The determination is helpful for the preliminary estimation of the in-band eddy current efect in the TianQin noise budget.The technique can be adopted to accurately measureχ(f)of the actual TM in other precision experiments,where the magnetic noise is a signifcant detection limit.展开更多
The lack of soft magnetic composites with high power density in MHz frequency range has become an obstacle in the efficient operation of the electrical and electronic equipments.Here,a promising method to increase the...The lack of soft magnetic composites with high power density in MHz frequency range has become an obstacle in the efficient operation of the electrical and electronic equipments.Here,a promising method to increase the cut-off frequency of iron-based soft magnetic composites to hundreds of MHz is reported.The cut-off frequency is increased from 10 MHz to 1 GHz by modulating the height of the ring,the distribution of particles,and the particle size.The mechanism of cut-off frequency and permeability is the coherent rotation of domain modulated by inhomogeneous field due to the eddy current effect.An empirical formula for the cut-off frequency in a magnetic ring composed of iron-based particles is established from experimental data.This work provides an effective approach to fabricate soft magnetic composites with a cut-off frequency in hundreds of MHz.展开更多
In order to measure boundary electrostatic and magnetic fluctuations simultaneously,a combined Langmuir-magnetic probe(CLMP)has been designed and built on joint-Texas experimental tokamak.The probe consists of 8 graph...In order to measure boundary electrostatic and magnetic fluctuations simultaneously,a combined Langmuir-magnetic probe(CLMP)has been designed and built on joint-Texas experimental tokamak.The probe consists of 8 graphite probe pins and a 3D magnetic probe,driven by a mechanical pneumatic device.By means of simulation,the shielding effect of the graphite sleeve on the magnetic fluctuation signal is explored,and the influence of the eddy current was reduced by cutting the graphite sleeve.In the experiment,it has been verified that the mutual inductance of electromagnetic signals can be ignored,and a 70–90 k Hz electromagnetic mode is observed around the last closed magnetic surface.The establishment of CLMP provides data for the exploration of the coupling of electrostatic and magnetic fluctuations.展开更多
In this paper, a set of basic equations for free vibration of ferromagnetic conducting plates in a transverse magnetic field are presented, in which the coupled effects of magnetization and eddy current on the mechani...In this paper, a set of basic equations for free vibration of ferromagnetic conducting plates in a transverse magnetic field are presented, in which the coupled effects of magnetization and eddy current on the mechanical behavior of the plate are included. Based on the quantitative analyses on the vibration frequency and the values of the critical magnetic field for several supporting conditions of the plate, the effects of the conductivity, the magnetic permeability, the thickness of the plate and supporting conditions on the vibration frequency of the plate and the critical magnetic field are discussed.展开更多
基金supported in part by the National Natural Science Foundation of China(Grant No.92060114)in part by the Sichuan Science and Technology Program(Nos.2022YFS0524 and 2022YFG0044).
文摘It is known that eddy current effect has a great influence on magnetic flux leakage testing(MFL).Usually,contacttype encoder wheels are used to measure MFL testing speed to evaluate the effect and further compensate testing signals.This speed measurement method is complicated,and inevitable abrasion and occasional slippage will reduce the measurement accuracy.In order to solve this problem,based on eddy current effect due to the relative movement,a speed measurement method is proposed,which is contactless and simple.In the high-speed MFL testing,eddy current induced in the specimen will cause an obvious modification to the applied field.This modified field,which is measured by Hall sensor,can be utilized to reflect the moving speed.Firstly,the measurement principle is illustrated based on Faraday’s law.Then,dynamic finite element simulations are conducted to investigate the modified magnetic field distribution.Finally,laboratory experiments are performed to validate the feasibility of the proposed method.The results show that Bmz(r1)and Bmx(r2)have a linear relation with moving speed,which could be used as an alternative measurement parameter.
基金supported by the National Key R&D Program of China(Grant No.2020YFC2200500)the Key Laboratory of Tian Qin Project(Sun Yat-sen University),Ministry of Education+1 种基金the National Natural Science Foundation of China(Grant Nos.12075325,12005308,and 11605065)the Doctoral Research Foundation Project of Hubei University of Arts and Science(Grant No.kyqdf2059017)。
文摘The effect from the interaction of the alternating current(AC)magnetic field with kilogram-level test mass(TM)limits the detectivity of the TianQin space-based gravitational wave detection.The quantifed effect requires the determination of the AC magnetic susceptibilityχ(f)of the TM.A torque method is proposed to measure theχ(f)of kg-level samples at the mHz band with a precision of 1×10^(-7).Combined with our previous work[Phys.Rev.Appl.18044010(2022)],the general frequency-dependent susceptibility of the alloy cube with side length L and electrical conductivityσis determined asχ(f)=χ0+(0.24±0.01)σμ0L^(2)f from 0.1 mHz to 1 Hz.The determination is helpful for the preliminary estimation of the in-band eddy current efect in the TianQin noise budget.The technique can be adopted to accurately measureχ(f)of the actual TM in other precision experiments,where the magnetic noise is a signifcant detection limit.
基金the National Natural Science Foun-dation of China(Grant Nos.91963201 and 12174163)the 111 Project(Grant No.B20063).
文摘The lack of soft magnetic composites with high power density in MHz frequency range has become an obstacle in the efficient operation of the electrical and electronic equipments.Here,a promising method to increase the cut-off frequency of iron-based soft magnetic composites to hundreds of MHz is reported.The cut-off frequency is increased from 10 MHz to 1 GHz by modulating the height of the ring,the distribution of particles,and the particle size.The mechanism of cut-off frequency and permeability is the coherent rotation of domain modulated by inhomogeneous field due to the eddy current effect.An empirical formula for the cut-off frequency in a magnetic ring composed of iron-based particles is established from experimental data.This work provides an effective approach to fabricate soft magnetic composites with a cut-off frequency in hundreds of MHz.
基金supported by the National Key R&D Program of China(No.2018YFE0309100)National Natural Science Foundation of China(No.51821005)。
文摘In order to measure boundary electrostatic and magnetic fluctuations simultaneously,a combined Langmuir-magnetic probe(CLMP)has been designed and built on joint-Texas experimental tokamak.The probe consists of 8 graphite probe pins and a 3D magnetic probe,driven by a mechanical pneumatic device.By means of simulation,the shielding effect of the graphite sleeve on the magnetic fluctuation signal is explored,and the influence of the eddy current was reduced by cutting the graphite sleeve.In the experiment,it has been verified that the mutual inductance of electromagnetic signals can be ignored,and a 70–90 k Hz electromagnetic mode is observed around the last closed magnetic surface.The establishment of CLMP provides data for the exploration of the coupling of electrostatic and magnetic fluctuations.
基金Outstanding Young Scientist Fund of NSFC( No.19725207)
文摘In this paper, a set of basic equations for free vibration of ferromagnetic conducting plates in a transverse magnetic field are presented, in which the coupled effects of magnetization and eddy current on the mechanical behavior of the plate are included. Based on the quantitative analyses on the vibration frequency and the values of the critical magnetic field for several supporting conditions of the plate, the effects of the conductivity, the magnetic permeability, the thickness of the plate and supporting conditions on the vibration frequency of the plate and the critical magnetic field are discussed.
