To identify refl ector fractures near borehole by using dipole-source refl ected-shearwave logging, we need to understand the relation between the amplitude of the refl ected shear wave and the source radiation, boreh...To identify refl ector fractures near borehole by using dipole-source refl ected-shearwave logging, we need to understand the relation between the amplitude of the refl ected shear wave and the source radiation, borehole conditions, and attenuation owing to the surrounding formations. To assess the effect of these factors on the amplitude of the refl ected waves, we first studied the radiation performance and radiation direction of the dipole source in fast, medium, and slow formations by using the asymptotic solution in the far fi eld of the borehole. Then, the relation between the fracture parameters, and the refl ected-shear-wave amplitude as well as the ratio of the refl ected-shear-wave amplitude to the direct-wave amplitude (relative amplitude, RA) was evaluated by the three-dimensional fi nite-difference (3D FDTD) method. Finally, the fracture detection capability of the dipole reflected-shear-wave logging tool in different formations was analyzed by using the RA. The results suggest that the radiation amplitude of the SH-wave in the slow formation is weaker than those in the fast and medium formations, and the amplitude of the refl ected shear wave is lower. However, the RA in the slow formation is close to or even greater than in the fast and medium formations, which means that dipole-source shear-wave logging has the same or even better fracture detection capability in the slow formation as in the fast and medium formations. In addition, when RA is small, there is a good correlation between the RA and the various fracture parameters in the different types of formation, which can be used in determining the lower limit of the fracture parameters identifi ed by refl ection logging.展开更多
This paper sums up the determining analysis of the measuring location of Treflusing a thermocouple during the thermography tests.Laboratory temperature distribution testing methods,analysis of value and location of Tre...This paper sums up the determining analysis of the measuring location of Treflusing a thermocouple during the thermography tests.Laboratory temperature distribution testing methods,analysis of value and location of Treflmeasurement are explained in this paper.The heat source is two halogen lamps of 500 watts eachfitted at a distance of 30–50 cm.Noises appearing during testing of thermography are corrected with measured T_(refl) value.The results of thermogram correction of corroded concrete surfaces using T_(refl) values are displayed in this paper too.The concrete surface temperature results of quantitative image processing method are compared to the experimental test results.The results showed good accuracy,which was seen from most errors<3%and the maximum error is<5%.The end of paper,explained of application Treflvalue to the corroded reinforced concrete thermogram.展开更多
Electrical capacitance tomography （ECT） is a promising technique for multi-phase flow measurement due to its high speed, low cost and non-intrusive sensing. Image reconstruction for ECT is an inverse problem of find...Electrical capacitance tomography （ECT） is a promising technique for multi-phase flow measurement due to its high speed, low cost and non-intrusive sensing. Image reconstruction for ECT is an inverse problem of finding the permittivity distribution of an object by measuring the electrical capacitances between sets of electrodes placed around its periphery. The conjugate gradient （CG） method is a popular image reconstruction method for ECT, in spite of its low convergence rate. In this paper, an advanced version of the CG method, the projected CG method, is used for image reconstruction of an ECT system. The solution space is projected into the Kryiov subspace and the inverse problem is solved by the CG method in a low-dimensional specific subspace. Both static and dynamic experiments were carried out for gas-solid two-phase flows. The flow regimes are identified using the reconstructed images obtained with the projected CG method. The results obtained indicate that the projected CG method improves the quality of reconstructed images and dramatically reduces computation time, as compared to the traditional sensitivity, Landweber, and CG methods. Furthermore, the projected CG method was also used to estimate the important parameters of the pneumatic conveying process, such as the volume concentration, flow velocity and mass flow rate of the solid phase. Therefore, the projected CG method is considered suitable for online gas-solid two-phase flow measurement,展开更多
数字化变电站通信网络CNDS(Communication Network of Digital Substation)与传统变电站自动化系统中的通信网络在结构、功能、性能和重要性等方面存在较大差异。在IEC 61850标准对变电站自动化系统功能分层的要求和明确数字化变电站通...数字化变电站通信网络CNDS(Communication Network of Digital Substation)与传统变电站自动化系统中的通信网络在结构、功能、性能和重要性等方面存在较大差异。在IEC 61850标准对变电站自动化系统功能分层的要求和明确数字化变电站通信网络效能目标的基础上,提出了过程层点对点/多点、过程层总线和站内统一网络3种数字化变电站通信网络组网方式;指出前2种组网方式目前较易实现,而站内统一网络将凭借信息高度共享等优势成为数字化变电站通信网络的最终形态。在分析以太网介质访问控制方法的基础上,针对标准以太网存在延时不确定的问题,提出了改进以太网实时性能的若干措施,并从中选择出适用于数字化变电站通信网络的方法。研究了数字化变电站通信网络广播域的划分方法。展开更多
Based on electrical capacitance tomography technique, a novel method for flow pattern display and voidage measurement of two-phase flow was proposed. A 12-electrode ECT measurement system was developed. The weighted b...Based on electrical capacitance tomography technique, a novel method for flow pattern display and voidage measurement of two-phase flow was proposed. A 12-electrode ECT measurement system was developed. The weighted back projection algorithm was selected as the image reconstruction algorithm to satisfy the requirement of flow pattern display. Combining the principle of Tikhnov regularization theory with the ART(Algebraic Reconstruction Technique) algorithm, a new quantitative image reconstruction algorithm was developed to implement voidage measurement of two-phase flow. Experimental results of gas-liqiud two-phase flow and gas-solid fluidized bed showed that the developed measurement system was successful. The speed of image reconstruction of flow pattern display was greater than 20 frames per second. The maximum error of voidage measurement is less than 5% and the time of voidage measurement is less than 2 seconds.展开更多
基金supported by the National Petroleum Major Projects(No.2017ZX05019-005)CNPC Fundamental Research Projects(No.2016A-3605)
文摘To identify refl ector fractures near borehole by using dipole-source refl ected-shearwave logging, we need to understand the relation between the amplitude of the refl ected shear wave and the source radiation, borehole conditions, and attenuation owing to the surrounding formations. To assess the effect of these factors on the amplitude of the refl ected waves, we first studied the radiation performance and radiation direction of the dipole source in fast, medium, and slow formations by using the asymptotic solution in the far fi eld of the borehole. Then, the relation between the fracture parameters, and the refl ected-shear-wave amplitude as well as the ratio of the refl ected-shear-wave amplitude to the direct-wave amplitude (relative amplitude, RA) was evaluated by the three-dimensional fi nite-difference (3D FDTD) method. Finally, the fracture detection capability of the dipole reflected-shear-wave logging tool in different formations was analyzed by using the RA. The results suggest that the radiation amplitude of the SH-wave in the slow formation is weaker than those in the fast and medium formations, and the amplitude of the refl ected shear wave is lower. However, the RA in the slow formation is close to or even greater than in the fast and medium formations, which means that dipole-source shear-wave logging has the same or even better fracture detection capability in the slow formation as in the fast and medium formations. In addition, when RA is small, there is a good correlation between the RA and the various fracture parameters in the different types of formation, which can be used in determining the lower limit of the fracture parameters identifi ed by refl ection logging.
基金This research was supported by the P3MI Research Grants.Thanks to Prof.Herlien D Setio as authors who received the grant.
文摘This paper sums up the determining analysis of the measuring location of Treflusing a thermocouple during the thermography tests.Laboratory temperature distribution testing methods,analysis of value and location of Treflmeasurement are explained in this paper.The heat source is two halogen lamps of 500 watts eachfitted at a distance of 30–50 cm.Noises appearing during testing of thermography are corrected with measured T_(refl) value.The results of thermogram correction of corroded concrete surfaces using T_(refl) values are displayed in this paper too.The concrete surface temperature results of quantitative image processing method are compared to the experimental test results.The results showed good accuracy,which was seen from most errors<3%and the maximum error is<5%.The end of paper,explained of application Treflvalue to the corroded reinforced concrete thermogram.
基金support from the National Natural Science Foundation of China(50937005,61001135,61201350)the Natural Science Foundation of Tianjin Municipal Science and Technology Commission(11JCYBJC06900)
文摘Electrical capacitance tomography （ECT） is a promising technique for multi-phase flow measurement due to its high speed, low cost and non-intrusive sensing. Image reconstruction for ECT is an inverse problem of finding the permittivity distribution of an object by measuring the electrical capacitances between sets of electrodes placed around its periphery. The conjugate gradient （CG） method is a popular image reconstruction method for ECT, in spite of its low convergence rate. In this paper, an advanced version of the CG method, the projected CG method, is used for image reconstruction of an ECT system. The solution space is projected into the Kryiov subspace and the inverse problem is solved by the CG method in a low-dimensional specific subspace. Both static and dynamic experiments were carried out for gas-solid two-phase flows. The flow regimes are identified using the reconstructed images obtained with the projected CG method. The results obtained indicate that the projected CG method improves the quality of reconstructed images and dramatically reduces computation time, as compared to the traditional sensitivity, Landweber, and CG methods. Furthermore, the projected CG method was also used to estimate the important parameters of the pneumatic conveying process, such as the volume concentration, flow velocity and mass flow rate of the solid phase. Therefore, the projected CG method is considered suitable for online gas-solid two-phase flow measurement,
文摘数字化变电站通信网络CNDS(Communication Network of Digital Substation)与传统变电站自动化系统中的通信网络在结构、功能、性能和重要性等方面存在较大差异。在IEC 61850标准对变电站自动化系统功能分层的要求和明确数字化变电站通信网络效能目标的基础上,提出了过程层点对点/多点、过程层总线和站内统一网络3种数字化变电站通信网络组网方式;指出前2种组网方式目前较易实现,而站内统一网络将凭借信息高度共享等优势成为数字化变电站通信网络的最终形态。在分析以太网介质访问控制方法的基础上,针对标准以太网存在延时不确定的问题,提出了改进以太网实时性能的若干措施,并从中选择出适用于数字化变电站通信网络的方法。研究了数字化变电站通信网络广播域的划分方法。
基金国家自然科学基金青年基金 (No .2 970 6 0 0 8)国家自然科学基金重大项目 (No .5 9995 46 0 -5 )资助项目~~
文摘Based on electrical capacitance tomography technique, a novel method for flow pattern display and voidage measurement of two-phase flow was proposed. A 12-electrode ECT measurement system was developed. The weighted back projection algorithm was selected as the image reconstruction algorithm to satisfy the requirement of flow pattern display. Combining the principle of Tikhnov regularization theory with the ART(Algebraic Reconstruction Technique) algorithm, a new quantitative image reconstruction algorithm was developed to implement voidage measurement of two-phase flow. Experimental results of gas-liqiud two-phase flow and gas-solid fluidized bed showed that the developed measurement system was successful. The speed of image reconstruction of flow pattern display was greater than 20 frames per second. The maximum error of voidage measurement is less than 5% and the time of voidage measurement is less than 2 seconds.
