A simple model of chromatographic mechanical mechanism is present, and then a scrics of theoretical chromatographic equations and fundamental Formulae are derived. These theoretical equations and formulae not only res...A simple model of chromatographic mechanical mechanism is present, and then a scrics of theoretical chromatographic equations and fundamental Formulae are derived. These theoretical equations and formulae not only reserve thermodynamic characteristics in the current fundamental chromatographic formulae, but also introduce one or more kinetic parameter, so it is possible to make the macroscopic-control on the effect of kinetic characteristics on chromatographic system.展开更多
In this paper, a governing differential equation of viscoelastic Timoshenko beam including both extension and shear viscosity is developed in the time domain by direct method. To measure the complex moduli and three p...In this paper, a governing differential equation of viscoelastic Timoshenko beam including both extension and shear viscosity is developed in the time domain by direct method. To measure the complex moduli and three parameters of standard linear solid, the forced vibration technique of beam is successfully used for PCL and PMMA specimens. The dynamical characteristics of viscoelastic Timoshenko beams, especially the damping properties, are derived from a considerable number of numerical computations. The analyses show that the viscosity of materials has great influence on dynamical characteristics of structures, especially on damping, and the standard linear solid model is the better one for describing the dynamic behavior of high viscous materials.展开更多
In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic tr...In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic triaxial tester.A scanning electron microscope(SEM)was employed to assess the soil samples after dynamic testing.The results indicate that the dynamic characteristics of lacustrine soft clay were significantly affected by confining pressure and water content.A quantitative relationship was established among confining pressures,water content,and the dynamic shear modulus ratio.The dynamic characteristic parameters of undisturbed,remolded and saturated soil are obviously different,and the original structure can enhance the shear strength of soil.By comparing the results with those from other studies,we found that the dynamic characters of soft clays were considerably varied in different regions,and lacustrine soft clays had a larger dynamic shear modulus ratio and a smaller damping ratio when the dynamic shear strain was large.Using IPP software to process the microstructural images,we found that the soil was dominated by small pores and medium particles,and the roundness of pores and particles had an apparently positive correlation with the maximum diameter.Moreover,the pores and particles of the soil showed fractal characteristics and directionality,and the fractal dimensions and probability entropy were strongly correlated with the macrostructural parameters.Finally,we developed a prediction model for macrostructural and microstructural parameters.展开更多
Traditional dynamic analysis of mechanical structures,often limited to individual beams or plates,fails to fully capture their dynamic behaviors.In systems where space and mass are constrained,such as the battery supp...Traditional dynamic analysis of mechanical structures,often limited to individual beams or plates,fails to fully capture their dynamic behaviors.In systems where space and mass are constrained,such as the battery support structures in electric aircraft,conventional absorbers and isolators are insufficient for effective vibration control.This study simplifies the battery support structure of electric aircraft as an integrated composite beam consisting of three interconnected beams,and investigated its structural dynamics properties and nonlinear vibration control under thermal conditions caused by battery heat.The nonlinear vibration control is performed using the Nitinol steel wire ropes(Ni Ti-ST),with nonlinear damping properties.The natural frequencies of system are determined using the Rayleigh-Ritz technique.Theoretical results are validated through both Finite Element Method(FEM)and hammer tests.Moreover,the dynamic equations are derived using the Lagrange method and discretized via the Galerkin Truncation Method(GTM).The Harmonic Balance Method(HBM)is used to evaluate the vibration responses of the integrated model,with further verification through the Runge-Kutta Method(RKM).The experiments are conducted to corroborate the theoretical analysis.The results show that the system frequency changes in stages with the increase of the stiffness of the integrated composite beam connection.Especially in the case of varying environments,as the temperature increases,the frequency of system will first increase to a certain maximum value and then gradually decrease.Furthermore,the NiTi-ST effectively reduces vibration in the integrated composite beam,particularly under varying temperatures and external excitations.展开更多
The deformation characteristics of silty soils under vibrational loads can easily change due to the wetting process,leading to the failure of roadbed structures.Commonly used methods for improving silty soils in engin...The deformation characteristics of silty soils under vibrational loads can easily change due to the wetting process,leading to the failure of roadbed structures.Commonly used methods for improving silty soils in engineering often yield unsatisfactory economic and ecological outcomes.As an environment-friendly soil improvement material,Xanthan gum has broad application prospects and is therefore considered a solidifying agent for enhancing silty soil properties in the Yellow River Basin.In this study,a series of tests is conducted using a scanning electron microscope and a dynamic triaxial testing apparatus to investigate the microstructure and dynamic deformation characteristics of unsaturated silty soil with varying xanthan gum contents during the wetting process.The results show that xanthan gum effectively fills voids between soil particles and adheres to their surfaces,forming fibrous and network structures.This modification enhances the inherent properties of the silty soil and significantly improves its stability under dynamic loading.Specifically,with increasing xanthan gum content,the dynamic shear modulus increases while the damping ratio decreases.During the wetting process,as suction decreases,the dynamic shear modulus decreases while the damping ratio increases.Xanthan gum reduces the sensitivity of the dynamic deformation characteristics of the treated silty soil to changes in suction levels.Finally,based on the modified Hardin-Drnevich hyperbolic model,a predictive model for the dynamic shear modulus and damping ratio of treated silty soil is proposed,considering the xanthan gum content.These research findings provide a theoretical basis for the construction and maintenance of water conservancy,slope stabilization,and roadbed projects in the Yellow River Basin.展开更多
The dual-rotor structure serves as the primary source of vibration in aero-engines. Understanding itsdynamical model and analyzing dynamic characteristics, such as critical speed and unbalanced response, arecrucial fo...The dual-rotor structure serves as the primary source of vibration in aero-engines. Understanding itsdynamical model and analyzing dynamic characteristics, such as critical speed and unbalanced response, arecrucial for rotor system dynamics. Previous work introduced a coaxial dual-rotor-support scheme for aeroengines,and a physical model featuring a high-speed flexible inner rotor with a substantial length-to-diameter ratiowas designed. Then a finite element (FE) dynamic model based on the Timoshenko beam elements and rigid bodykinematics of the dual-rotor system is modeled, with the Newmark method and Newton–Raphson method used forthe numerical calculation to study the dynamic characteristics of the system. Three different simulation models,including beam-based FE (1D) model, solid-based FE (3D) model, and transfer matrix model, were designed tostudy the characteristics of mode and the critical speed characteristic of the dual-rotor system. The unbalancedresponse of the dual-rotor system was analyzed to study the influence of mass unbalance on the rotor system. Theeffect of different disk unbalance phases and different speed ratios on the dynamic characteristics of the dual-rotorsystem was investigated in detail. The experimental result shows that the beam-based FE model is effective andsuitable for studying the dual-rotor system.展开更多
Hydraulic technology has the outstanding advantages of easy pressure compensation and high power density.It is an indispensable part of subsea equipment,such as deep-sea operations and submersible propulsion.There are...Hydraulic technology has the outstanding advantages of easy pressure compensation and high power density.It is an indispensable part of subsea equipment,such as deep-sea operations and submersible propulsion.There are few studies on electrohydraulic servo valves(EHSVs)in the deep sea.In this work,a novel electro-hydraulic servo rotary valve is designed,and its mathematical model is established.The analysis considers the variations in physical parameters such as temperature,ambient pressure,and oil viscosity resulting from changes in sea depth.This study focuses on the deformation of the rotary valve and the consequent alterations in leakage and friction torque.The findings indicate that at a depth of 12000 m,the fit clearance between the valve spool and the valve sleeve is 0.00413 mm,representing a 17%reduction compared with the clearance in a land environment.Then,the response of the rotary valve to depth is analyzed.The results indicate that the bandwidth of the rotary valve decreases with increasing depth.This study provides a reference for the use of the EHSV in the deep sea.展开更多
In this study, shaking table tests were performed to investigate the dynamic characteristics of a mold transformer. Based on the test results, rotary friction dampers were developed to mitigate the excessive lateral d...In this study, shaking table tests were performed to investigate the dynamic characteristics of a mold transformer. Based on the test results, rotary friction dampers were developed to mitigate the excessive lateral displacement that occurred along the direction of the weak stiffness axis of the mold transformer. In addition, shaking table tests were performed by attaching friction dampers to both sides of the mold transformer. Based on the shaking table test results, the natural frequency, mode vector, and damping ratio of the mold transformer were derived using the transfer function and half-power bandwidth. The test results indicated that the use of friction dampers can decrease the displacement and acceleration response of the mold transformer. Finally, dynamic structural models were established considering the component connectivity and mass distribution of the mold transformer. In addition, a numerical strategy was proposed to calibrate the stiffness coefficients of the mold transformer, thereby facilitating the relationship between generalized mass and stiffness. The results indicated that the analytical model based on the calibration strategy of stiffness coefficients can reasonably simulate the dynamic behavior of the mold transformer using friction dampers with regard to transfer function, displacement, and acceleration response.展开更多
The extreme conditions severely constrain the dynamic characteristics of aircraft landing gear retraction mechanism(ALGRM).This paper proposes a dynamic modeling and analysis method for ALGRM considering the coupling ...The extreme conditions severely constrain the dynamic characteristics of aircraft landing gear retraction mechanism(ALGRM).This paper proposes a dynamic modeling and analysis method for ALGRM considering the coupling effects of extreme conditions such as clearance joints,flexible rods,and salt spray corrosion.Firstly,the mathematical model for clearance joint and flexible rod is established and the dynamic model of ALGRM considering clearance joints and flexible rods is formulated based on Lagrangian equation.Furthermore,the salt spray corrosion model for clearance joint is developed using COMSOL simulation software.Finally,the effects of different temperatures and relative humidities on the corrosion depth of clearance joint and the dynamic characteristics of ALGRM under the coupling effects of extreme conditions are investigated.The results have found that the impact of extreme conditions on dynamics of system cannot be ignored.This study not only provides a theoretical foundation for predicting the dynamic characteristics of ALGRM under extreme conditions but also offers insights for the optimization design and corrosion protection efforts of landing gear.展开更多
Aerodynamic and dynamic interference from trains is a key issue of concern for the safety of road vehicles travelling on single-level rail-cum road bridges.Based on the wind-road vehicle-train-bridge(WRTB)coupled vibr...Aerodynamic and dynamic interference from trains is a key issue of concern for the safety of road vehicles travelling on single-level rail-cum road bridges.Based on the wind-road vehicle-train-bridge(WRTB)coupled vibration system developed herein,this study examines the dynamic characteristics when road vehicles meet trains in this situation.The influence of load combination,vehicle type and vehicle location is analyzed.A method to obtain the aerodynamic load of road vehicles encountering the train at an arbitrary wind speed is proposed.The results show that due to the windproof facilities and the large line distance between the railway and highway,the aerodynamic and dynamic influence of trains on road vehicles is slight,and the vibration of road vehicles depends on the road roughness.Among the road vehicles discussed,the bus is the easiest to rollover,and the truck-trailer is the easiest to sideslip.Compared with the aerodynamic impact of trains,the crosswind has a more significant influence on road vehicles.The first peak/valley value of aerodynamic loads determines the maximum dynamic response,and the quick method is optimized based on this conclusion.Test cases show that the optimized method can produce conservative results and can be used for relevant research or engineering applications.展开更多
Transparent sand is a special material to realize visualization of concealed work in geotechnical engineering. To investigate the dynamic characteristics of transparent sand, a series of undrained cyclic simple shear ...Transparent sand is a special material to realize visualization of concealed work in geotechnical engineering. To investigate the dynamic characteristics of transparent sand, a series of undrained cyclic simple shear tests were conducted on the saturated transparent sand composed of fused quartz and refractive index-matched oil mixture. The results reveal that an increase in the initial shear stress ratio significantly affects the shape of the hysteresis loop, particularly resulting in more pronounced asymmetrical accumulation. Factors such as lower relative density, higher cyclic stress ratios and higher initial shear stress ratio have been shown to accelerate cyclic deformation, cyclic pore water pressure and stiffness degradation. The cyclic liquefaction resistance curves decrease as the initial shear stress ratio increases or as relative density decreases. Booker model and power law function model were applied to predict the pore water pressure for transparent sand. Both models yielded excellent fits for their respective condition, indicating a similar dynamic liquefaction pattern to that of natural sands. Finally, transparent sand displays similar dynamic characteristics in terms of cyclic liquefaction resistance and Kα correction factor. These comparisons indicate that transparent sand can serve as an effective means to mimic many natural sands in dynamic model tests.展开更多
Transmission towers,serving as the support structure of transmission lines,are significant for the functional-ity of an electric transmission system.Bolt joint loosening is one of the critical factors that can affect ...Transmission towers,serving as the support structure of transmission lines,are significant for the functional-ity of an electric transmission system.Bolt joint loosening is one of the critical factors that can affect the safety and stability of transmission towers.In this study,the effects of bolt joint loosening on the dynamic characteristics of a 220-kV angle steel transmission tower are the main topic of concern.First,the mechanical properties of typical joints subjected to different degrees of bolt loosening are studied by finite solid-element simulation,based on which a finite hybrid-element modeling method is developed for a tower structure suffering varying loose degrees in the joints.Taking a 220-kV angle steel transmission tower as the object,the influence of the position and degree of loosening on the tower’s natural frequencies and mode shapes are simulated and discussed.The results demonstrate that the main-member splice joint and the main diagonal-horizontal member gusset plate joint account for the dominant impact on the dynamic characteristics of the tower.In addition,the dominant joint shifts from the main-member splice joint to the main diagonal-horizontal member gusset plate joint as the considered modal order increases.In the case of double joints loosening simultaneously,the loosening of nondomi-nant joints has nonnegligible effects on the tower as well.展开更多
Permanent faults in medium-voltage cable joints significantly impact the reliability of distribution networks.Radial breakdowns caused by water ingress often lead to several self-extinguishing arc discharges—referred...Permanent faults in medium-voltage cable joints significantly impact the reliability of distribution networks.Radial breakdowns caused by water ingress often lead to several self-extinguishing arc discharges—referred to as incipient faults—before developing into permanent faults.Effective monitoring of incipient faults can help reduce outage costs associated with permanent faults.However,the specific fault scenarios of incipient faults remain insufficiently understood.To address this gap,this study designed a simulation experiment replicating incipient fault conditions in medium-voltage cable joints under humid environments,based on actual operating scenarios.The experiment compared the insulation strength required to trigger incipient faults and examined both non-electrical fault characteristics,such as insulation damage and arc flame intensity,and electrical characteristics,such as fault current and impedance.Experimental observations show that,in cable joints,gaps without accumulated water retain sufficient insulation strength to prevent breakdown.However,the infiltration of accumulated water shortens the effective insulation path,thereby lowering the breakdown threshold.The peak current of an incipient fault can range from hundreds to thousands of amperes,with a duration of approximately 1/8 to 1/4 of a power–frequency cycle.During incipient faults,arc burning on the pore wall leaves conductive traces,which progressively reduce the insulation strength of the surrounding environment.As these traces accumulate over multiple events,the likelihood of breakdown increases,ultimately resulting in a permanent fault.Permanent faults are characterized by intense,sustained arc discharges that persist over a macroscopic time scale and exhibit flat-shoulder waveforms within individual cycles,with discharge intensity increasing progressively over time.展开更多
The influence of FT(freeze-thaw)cycles and average strain rate on the dynamic impact performance,energy evolution characteristics,and failure behavior of sandstone was studied through dynamic impact tests.Results disp...The influence of FT(freeze-thaw)cycles and average strain rate on the dynamic impact performance,energy evolution characteristics,and failure behavior of sandstone was studied through dynamic impact tests.Results displayed that the FT damage process of samples can be divided into three stages based on the changes in weight,porosity,and P-wave velocity.The dynamic peak strength,dynamic elastic modulus,and strength ratio decreased with increasing FT cycles,and increased with increasing average strain rate.Moreover,the average strain rate reduced the influence of FT cycles on dynamic peak strength.In general,the incident energy,reflected energy and dissipated energy increased with increasing average strain rate,the transmitted energy was negligibly affected by the average strain rate,and the energy dissipation ratio decreased with increasing average strain rate.In addition,the influence of FT cycles on each type of energy and energy dissipation ratio during sample failure was smaller than that of average strain rate.The average size of fragments can accurately demonstrate the impact of FT damage and average strain rate on dynamic peak strength and failure mode,and quantitatively evaluate the sample’s fragmentation degree.Fractal dimension varies with FT cycles and average strain rate,and the threshold is between 148.30 and 242.57 s^(-1).If the average strain rate is in the threshold range,the relationship between the fractal dimension and dynamic peak strength is more regular,otherwise,it will become complicated.The results reveal the dynamic failure mechanism of white sandstone samples,providing assistance for dynamic rock-breaking and disaster prevention in cold regions.展开更多
Steep bedding slopes are widely distributed in Southwestern China’s mountainous regions and have complex seismic responses and instability risks,causing casualties and property losses.Considering the high-seismic-int...Steep bedding slopes are widely distributed in Southwestern China’s mountainous regions and have complex seismic responses and instability risks,causing casualties and property losses.Considering the high-seismic-intensity environment,the dynamic failure evolution and instability mechanism of high-steep bedding slopes are simulated via the discrete element method and shaking table test.The dynamic response characteristics and cumulative failure effects of slopes subjected to continuous ground motion are investigated.The results show that the dynamic response characteristics of slopes under continuous earthquakes are influenced by geological and topographic conditions.Elevation has a distinct impact on both the slope interior and surface,with amplification effects more pronounced on the surface.The weak interlayers have different influences on the dynamic amplification effect of slopes.Weak interlayers have dynamic magnification effects on the slope surface at relative elevations of 0-0.33 and 0.82-1.0 but have weakening effects between 0.33 and 0.82.Moreover,the weak interlayers also have controlling effects on the dynamic instability mode of slopes.The characteristics of intergranular contact failure,fracture propagation,and displacement distribution are analyzed to reveal the dynamic failure evolution and instability mechanism through the discrete-element model.The dynamic instability process of slopes includes three stages:fracture initiation(0-0.2g),fracture expansion(0.2g-0.3g),and sliding instability(0.3g-0.6g).This work can provide a valuable reference for the seismic stability and reinforcement of complex slopes.展开更多
The dynamics model of the transmission system of the internal grinder is established on the bases of Riccati transfer matrix. The dynamic characteristics of the internal grinder are obtained by analyzing the relations...The dynamics model of the transmission system of the internal grinder is established on the bases of Riccati transfer matrix. The dynamic characteristics of the internal grinder are obtained by analyzing the relationship between dynamic modal flexibility and modal flexibility, which is used to find out the dangerous model of the transmission system and its weak areas. Then design parameters of weak areas are modified, the new one from the old structure is put forward, and the dynamic characteristics of new ...展开更多
During the hoisting process of the offshore substation,changes in the hoisting speed can affect the hoisting system.Therefore,this study set four different speed conditions for the lifting and lowering stages of the i...During the hoisting process of the offshore substation,changes in the hoisting speed can affect the hoisting system.Therefore,this study set four different speed conditions for the lifting and lowering stages of the installation process,and studied the impact of different lifting and lowering speeds on the hoisting system under the same environmental conditions through numerical simulation.The results show that during the lifting operation,as the lifting speed increases,the swing motion of the substation and the installation vessel tends to decrease,and the faster the hoisting speed,the more obvious the swing suppression of the substation and the installation vessel,and the smaller the fluctuation in the tension amplitude of the slings and mooring lines.In contrast,during the lowering operation,as the lowering speed increases,the swing motion of the substation and the installation vessel tends to increase,and the faster the lowering speed,the more obvious the swing amplification effect of the substation and the installation vessel.Therefore,during hoisting operations,increasing the lifting speed and reducing the lowering speed can mitigate the motion performance of the hoisting coupling system,reduce the tension amplitude variation of the sling and mooring,and ensure the smooth progress of the hoisting operation.展开更多
A dynamics model of the self-aligning ball bearing is proposed based on the Jones-Harris method （JHM）, and a computer program is developed to solve the equations by using the Newton-Raphson method. A parametric anal...A dynamics model of the self-aligning ball bearing is proposed based on the Jones-Harris method （JHM）, and a computer program is developed to solve the equations by using the Newton-Raphson method. A parametric analysis of the centrifugal force and the gyroscopic moment, the contact loads, the contact angles, the radial deformation and the radial stiffness is carried out. The analytical results show that the applied loads and the rotational speed are two main factors that can influence the distributions of the contact loads and values of the contact angles. The centrifugal force and the gyroscopic moment increase with the increase in the rotational speed, resulting in the decrease of the inner raceway contact load and the increase of the outer raceway contact load. The outer raceway contact angle increases under the centrifugal force; on the contrary, the inner raceway contact angle decreases. Furthermore, the differences between the inner and the outer contact angles increase with the increase in the rotational speed. The higher rotational speed results in the decrease in radial stiffness for the self-aligning ball bearing, and the raceway curvature coefficient, to some extent, also influences the radial stiffness.展开更多
The inner and outer oil film dynamic characteristic coefficients of floating ring bearings（FRBs） change due to the manufacturing tolerance of the floating ring, journal and intermediate, which leads to high-speed tu...The inner and outer oil film dynamic characteristic coefficients of floating ring bearings（FRBs） change due to the manufacturing tolerance of the floating ring, journal and intermediate, which leads to high-speed turbocharger＇s vibration too large and even causes nonlinear vibration accident. However, the investigation of floating ring bearing manufacturing tolerance clearance on the rotordynamic characteristics is less at present. In order to study the influence law of inner and outer clearance on turbocharger vibration, the rotor dynamic motion equations of turbocharger supported in FRBs are derived by analyzing the size relations between floating ring, journal and intermediate for the inner and outer oil film clearances, the time transient response analysis for combination of FRBs clearance are developed. A realistic turbocharger is taken as a research object, the FE model of the turbocharger with FRBs is modeled. Under the conditions of four kinds of limit state bearing clearances for inner and outer oil film, the nonlinear transient analyses are performed based on the established FE dynamic models of the nonlinear rotor-FRBs system applied incentive combinations of gravity and unbalance force, respectively. From the waterfall, the simulation results show that the speed for the appearance of fractional frequency is not identical and the amplitude magnitude is different under the four kinds of bearing manufacturing tolerance limit clearances, and fractional frequency does not appear in the turbocharger and the amplitude is minimum under the ODMin/IDMax bearing manufacturing tolerance clearances. The turbocharger vibration is reduced by controlling the manufacturing tolerance clearance combinations of FRBs, which is helpful for the dynamic design and production-manufacturing of high-speed turbocharger.展开更多
A 3D finite element model for the Taizhou Yangtze River Bridge,the first triple-tower long-span suspension bridge in China,is established based on the nonlinear finite element software ABAQUS,and the dynamic character...A 3D finite element model for the Taizhou Yangtze River Bridge,the first triple-tower long-span suspension bridge in China,is established based on the nonlinear finite element software ABAQUS,and the dynamic characteristics of the bridge are analyzed using the LANCZOS eigenvalue solution method. The study focuses on the effects of the vertical,lateral and torsional stiffness of the steel box girder,the rigid central buckle and the elastic restraints connecting the towers and the steel box girder on the dynamic characteristics of the triple-tower suspension bridge. Our results show that,in general,the dynamic characteristics of the triple-tower suspension bridge are similar to those of two-tower suspension bridges. The vertical,lateral and torsional stiffness of the steel box girder have different effects on the dynamic characteristics of triple-tower suspension bridges. The elastic re-straints have a more significant effect on the dynamic characteristics than the central buckle,and decreasing the stiffness of the elastic restraints results in the appearance of a longitudinal floating vibration mode of the bridge. Also,rigid central buckles have a greater influence on the dynamic characteristics of triple-tower suspension bridges than on those of two-tower suspension bridges. The results obtained could serve as a valuable numerical reference for analyzing and designing super-long-span triple-tower suspension bridges.展开更多
文摘A simple model of chromatographic mechanical mechanism is present, and then a scrics of theoretical chromatographic equations and fundamental Formulae are derived. These theoretical equations and formulae not only reserve thermodynamic characteristics in the current fundamental chromatographic formulae, but also introduce one or more kinetic parameter, so it is possible to make the macroscopic-control on the effect of kinetic characteristics on chromatographic system.
文摘In this paper, a governing differential equation of viscoelastic Timoshenko beam including both extension and shear viscosity is developed in the time domain by direct method. To measure the complex moduli and three parameters of standard linear solid, the forced vibration technique of beam is successfully used for PCL and PMMA specimens. The dynamical characteristics of viscoelastic Timoshenko beams, especially the damping properties, are derived from a considerable number of numerical computations. The analyses show that the viscosity of materials has great influence on dynamical characteristics of structures, especially on damping, and the standard linear solid model is the better one for describing the dynamic behavior of high viscous materials.
基金National Natural Science Foundation of China under Grant No.52278340Natural Science Foundation of Hebei Province under Grant No.E2023202028。
文摘In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic triaxial tester.A scanning electron microscope(SEM)was employed to assess the soil samples after dynamic testing.The results indicate that the dynamic characteristics of lacustrine soft clay were significantly affected by confining pressure and water content.A quantitative relationship was established among confining pressures,water content,and the dynamic shear modulus ratio.The dynamic characteristic parameters of undisturbed,remolded and saturated soil are obviously different,and the original structure can enhance the shear strength of soil.By comparing the results with those from other studies,we found that the dynamic characters of soft clays were considerably varied in different regions,and lacustrine soft clays had a larger dynamic shear modulus ratio and a smaller damping ratio when the dynamic shear strain was large.Using IPP software to process the microstructural images,we found that the soil was dominated by small pores and medium particles,and the roundness of pores and particles had an apparently positive correlation with the maximum diameter.Moreover,the pores and particles of the soil showed fractal characteristics and directionality,and the fractal dimensions and probability entropy were strongly correlated with the macrostructural parameters.Finally,we developed a prediction model for macrostructural and microstructural parameters.
基金supported by the National Natural Science Foundation of China(No.12272240)the Liaoning Revitalization Talents Program,China(No.XLYC2203197)。
文摘Traditional dynamic analysis of mechanical structures,often limited to individual beams or plates,fails to fully capture their dynamic behaviors.In systems where space and mass are constrained,such as the battery support structures in electric aircraft,conventional absorbers and isolators are insufficient for effective vibration control.This study simplifies the battery support structure of electric aircraft as an integrated composite beam consisting of three interconnected beams,and investigated its structural dynamics properties and nonlinear vibration control under thermal conditions caused by battery heat.The nonlinear vibration control is performed using the Nitinol steel wire ropes(Ni Ti-ST),with nonlinear damping properties.The natural frequencies of system are determined using the Rayleigh-Ritz technique.Theoretical results are validated through both Finite Element Method(FEM)and hammer tests.Moreover,the dynamic equations are derived using the Lagrange method and discretized via the Galerkin Truncation Method(GTM).The Harmonic Balance Method(HBM)is used to evaluate the vibration responses of the integrated model,with further verification through the Runge-Kutta Method(RKM).The experiments are conducted to corroborate the theoretical analysis.The results show that the system frequency changes in stages with the increase of the stiffness of the integrated composite beam connection.Especially in the case of varying environments,as the temperature increases,the frequency of system will first increase to a certain maximum value and then gradually decrease.Furthermore,the NiTi-ST effectively reduces vibration in the integrated composite beam,particularly under varying temperatures and external excitations.
基金supported by the Postgraduate Education Reform and Quality Improvement Project of Henan Province,China(Grant No.YJS2023AL004)the Graduate Innovation Project of North China University of Water Resources and Electric Power(Grant No.NCWUYC-202315069)the China National Scholarship Fund organized by the China Scholarship Council(Grant No.202208410337).
文摘The deformation characteristics of silty soils under vibrational loads can easily change due to the wetting process,leading to the failure of roadbed structures.Commonly used methods for improving silty soils in engineering often yield unsatisfactory economic and ecological outcomes.As an environment-friendly soil improvement material,Xanthan gum has broad application prospects and is therefore considered a solidifying agent for enhancing silty soil properties in the Yellow River Basin.In this study,a series of tests is conducted using a scanning electron microscope and a dynamic triaxial testing apparatus to investigate the microstructure and dynamic deformation characteristics of unsaturated silty soil with varying xanthan gum contents during the wetting process.The results show that xanthan gum effectively fills voids between soil particles and adheres to their surfaces,forming fibrous and network structures.This modification enhances the inherent properties of the silty soil and significantly improves its stability under dynamic loading.Specifically,with increasing xanthan gum content,the dynamic shear modulus increases while the damping ratio decreases.During the wetting process,as suction decreases,the dynamic shear modulus decreases while the damping ratio increases.Xanthan gum reduces the sensitivity of the dynamic deformation characteristics of the treated silty soil to changes in suction levels.Finally,based on the modified Hardin-Drnevich hyperbolic model,a predictive model for the dynamic shear modulus and damping ratio of treated silty soil is proposed,considering the xanthan gum content.These research findings provide a theoretical basis for the construction and maintenance of water conservancy,slope stabilization,and roadbed projects in the Yellow River Basin.
文摘The dual-rotor structure serves as the primary source of vibration in aero-engines. Understanding itsdynamical model and analyzing dynamic characteristics, such as critical speed and unbalanced response, arecrucial for rotor system dynamics. Previous work introduced a coaxial dual-rotor-support scheme for aeroengines,and a physical model featuring a high-speed flexible inner rotor with a substantial length-to-diameter ratiowas designed. Then a finite element (FE) dynamic model based on the Timoshenko beam elements and rigid bodykinematics of the dual-rotor system is modeled, with the Newmark method and Newton–Raphson method used forthe numerical calculation to study the dynamic characteristics of the system. Three different simulation models,including beam-based FE (1D) model, solid-based FE (3D) model, and transfer matrix model, were designed tostudy the characteristics of mode and the critical speed characteristic of the dual-rotor system. The unbalancedresponse of the dual-rotor system was analyzed to study the influence of mass unbalance on the rotor system. Theeffect of different disk unbalance phases and different speed ratios on the dynamic characteristics of the dual-rotorsystem was investigated in detail. The experimental result shows that the beam-based FE model is effective andsuitable for studying the dual-rotor system.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFC2805703)the Major Training Program of University Research and Innovation Platform of Gansu Provincial Department of Education(Grant No.2024CXPT-09).
文摘Hydraulic technology has the outstanding advantages of easy pressure compensation and high power density.It is an indispensable part of subsea equipment,such as deep-sea operations and submersible propulsion.There are few studies on electrohydraulic servo valves(EHSVs)in the deep sea.In this work,a novel electro-hydraulic servo rotary valve is designed,and its mathematical model is established.The analysis considers the variations in physical parameters such as temperature,ambient pressure,and oil viscosity resulting from changes in sea depth.This study focuses on the deformation of the rotary valve and the consequent alterations in leakage and friction torque.The findings indicate that at a depth of 12000 m,the fit clearance between the valve spool and the valve sleeve is 0.00413 mm,representing a 17%reduction compared with the clearance in a land environment.Then,the response of the rotary valve to depth is analyzed.The results indicate that the bandwidth of the rotary valve decreases with increasing depth.This study provides a reference for the use of the EHSV in the deep sea.
基金Basic Science Research Program of the National Research Foundation of Korea under Grant Nos.NRF-2020R1A6A1A03044977 and NRF2022R1A2C2004351。
文摘In this study, shaking table tests were performed to investigate the dynamic characteristics of a mold transformer. Based on the test results, rotary friction dampers were developed to mitigate the excessive lateral displacement that occurred along the direction of the weak stiffness axis of the mold transformer. In addition, shaking table tests were performed by attaching friction dampers to both sides of the mold transformer. Based on the shaking table test results, the natural frequency, mode vector, and damping ratio of the mold transformer were derived using the transfer function and half-power bandwidth. The test results indicated that the use of friction dampers can decrease the displacement and acceleration response of the mold transformer. Finally, dynamic structural models were established considering the component connectivity and mass distribution of the mold transformer. In addition, a numerical strategy was proposed to calibrate the stiffness coefficients of the mold transformer, thereby facilitating the relationship between generalized mass and stiffness. The results indicated that the analytical model based on the calibration strategy of stiffness coefficients can reasonably simulate the dynamic behavior of the mold transformer using friction dampers with regard to transfer function, displacement, and acceleration response.
基金supported by the National Natural Science Foundation of China(Grant No.51875086)Sichuan Science and Technology Program(Grant No.2023NSFSC0866).
文摘The extreme conditions severely constrain the dynamic characteristics of aircraft landing gear retraction mechanism(ALGRM).This paper proposes a dynamic modeling and analysis method for ALGRM considering the coupling effects of extreme conditions such as clearance joints,flexible rods,and salt spray corrosion.Firstly,the mathematical model for clearance joint and flexible rod is established and the dynamic model of ALGRM considering clearance joints and flexible rods is formulated based on Lagrangian equation.Furthermore,the salt spray corrosion model for clearance joint is developed using COMSOL simulation software.Finally,the effects of different temperatures and relative humidities on the corrosion depth of clearance joint and the dynamic characteristics of ALGRM under the coupling effects of extreme conditions are investigated.The results have found that the impact of extreme conditions on dynamics of system cannot be ignored.This study not only provides a theoretical foundation for predicting the dynamic characteristics of ALGRM under extreme conditions but also offers insights for the optimization design and corrosion protection efforts of landing gear.
基金The Research Project of Southwest Municipal Design&Research Institute of China under Grant No.2023KY-KT-02-I。
文摘Aerodynamic and dynamic interference from trains is a key issue of concern for the safety of road vehicles travelling on single-level rail-cum road bridges.Based on the wind-road vehicle-train-bridge(WRTB)coupled vibration system developed herein,this study examines the dynamic characteristics when road vehicles meet trains in this situation.The influence of load combination,vehicle type and vehicle location is analyzed.A method to obtain the aerodynamic load of road vehicles encountering the train at an arbitrary wind speed is proposed.The results show that due to the windproof facilities and the large line distance between the railway and highway,the aerodynamic and dynamic influence of trains on road vehicles is slight,and the vibration of road vehicles depends on the road roughness.Among the road vehicles discussed,the bus is the easiest to rollover,and the truck-trailer is the easiest to sideslip.Compared with the aerodynamic impact of trains,the crosswind has a more significant influence on road vehicles.The first peak/valley value of aerodynamic loads determines the maximum dynamic response,and the quick method is optimized based on this conclusion.Test cases show that the optimized method can produce conservative results and can be used for relevant research or engineering applications.
基金Project(U2268213) supported by the National Natural Science Foundation of ChinaProject(2024YFHZ0121) supported by the Sichuan Science and Technology Program,China。
文摘Transparent sand is a special material to realize visualization of concealed work in geotechnical engineering. To investigate the dynamic characteristics of transparent sand, a series of undrained cyclic simple shear tests were conducted on the saturated transparent sand composed of fused quartz and refractive index-matched oil mixture. The results reveal that an increase in the initial shear stress ratio significantly affects the shape of the hysteresis loop, particularly resulting in more pronounced asymmetrical accumulation. Factors such as lower relative density, higher cyclic stress ratios and higher initial shear stress ratio have been shown to accelerate cyclic deformation, cyclic pore water pressure and stiffness degradation. The cyclic liquefaction resistance curves decrease as the initial shear stress ratio increases or as relative density decreases. Booker model and power law function model were applied to predict the pore water pressure for transparent sand. Both models yielded excellent fits for their respective condition, indicating a similar dynamic liquefaction pattern to that of natural sands. Finally, transparent sand displays similar dynamic characteristics in terms of cyclic liquefaction resistance and Kα correction factor. These comparisons indicate that transparent sand can serve as an effective means to mimic many natural sands in dynamic model tests.
基金The Youth Foundation Project of Jiangsu Province(No.BK20230337)the Natural Science Research of Jiangsu Higher Education Institutions of China(No.22KJB560004)the National Natu-ral Science Foundation of China(No.52278523)。
文摘Transmission towers,serving as the support structure of transmission lines,are significant for the functional-ity of an electric transmission system.Bolt joint loosening is one of the critical factors that can affect the safety and stability of transmission towers.In this study,the effects of bolt joint loosening on the dynamic characteristics of a 220-kV angle steel transmission tower are the main topic of concern.First,the mechanical properties of typical joints subjected to different degrees of bolt loosening are studied by finite solid-element simulation,based on which a finite hybrid-element modeling method is developed for a tower structure suffering varying loose degrees in the joints.Taking a 220-kV angle steel transmission tower as the object,the influence of the position and degree of loosening on the tower’s natural frequencies and mode shapes are simulated and discussed.The results demonstrate that the main-member splice joint and the main diagonal-horizontal member gusset plate joint account for the dominant impact on the dynamic characteristics of the tower.In addition,the dominant joint shifts from the main-member splice joint to the main diagonal-horizontal member gusset plate joint as the considered modal order increases.In the case of double joints loosening simultaneously,the loosening of nondomi-nant joints has nonnegligible effects on the tower as well.
基金supported by National Natural Science Foundation of China(No.52077133).
文摘Permanent faults in medium-voltage cable joints significantly impact the reliability of distribution networks.Radial breakdowns caused by water ingress often lead to several self-extinguishing arc discharges—referred to as incipient faults—before developing into permanent faults.Effective monitoring of incipient faults can help reduce outage costs associated with permanent faults.However,the specific fault scenarios of incipient faults remain insufficiently understood.To address this gap,this study designed a simulation experiment replicating incipient fault conditions in medium-voltage cable joints under humid environments,based on actual operating scenarios.The experiment compared the insulation strength required to trigger incipient faults and examined both non-electrical fault characteristics,such as insulation damage and arc flame intensity,and electrical characteristics,such as fault current and impedance.Experimental observations show that,in cable joints,gaps without accumulated water retain sufficient insulation strength to prevent breakdown.However,the infiltration of accumulated water shortens the effective insulation path,thereby lowering the breakdown threshold.The peak current of an incipient fault can range from hundreds to thousands of amperes,with a duration of approximately 1/8 to 1/4 of a power–frequency cycle.During incipient faults,arc burning on the pore wall leaves conductive traces,which progressively reduce the insulation strength of the surrounding environment.As these traces accumulate over multiple events,the likelihood of breakdown increases,ultimately resulting in a permanent fault.Permanent faults are characterized by intense,sustained arc discharges that persist over a macroscopic time scale and exhibit flat-shoulder waveforms within individual cycles,with discharge intensity increasing progressively over time.
基金Funded by the National Natural Science Foundation of China(Nos.52174088,42277154)the Independent Innovation Research Fund Graduate Free Exploration Project for the Wuhan University of Technology(No.104972024JYS0007)。
文摘The influence of FT(freeze-thaw)cycles and average strain rate on the dynamic impact performance,energy evolution characteristics,and failure behavior of sandstone was studied through dynamic impact tests.Results displayed that the FT damage process of samples can be divided into three stages based on the changes in weight,porosity,and P-wave velocity.The dynamic peak strength,dynamic elastic modulus,and strength ratio decreased with increasing FT cycles,and increased with increasing average strain rate.Moreover,the average strain rate reduced the influence of FT cycles on dynamic peak strength.In general,the incident energy,reflected energy and dissipated energy increased with increasing average strain rate,the transmitted energy was negligibly affected by the average strain rate,and the energy dissipation ratio decreased with increasing average strain rate.In addition,the influence of FT cycles on each type of energy and energy dissipation ratio during sample failure was smaller than that of average strain rate.The average size of fragments can accurately demonstrate the impact of FT damage and average strain rate on dynamic peak strength and failure mode,and quantitatively evaluate the sample’s fragmentation degree.Fractal dimension varies with FT cycles and average strain rate,and the threshold is between 148.30 and 242.57 s^(-1).If the average strain rate is in the threshold range,the relationship between the fractal dimension and dynamic peak strength is more regular,otherwise,it will become complicated.The results reveal the dynamic failure mechanism of white sandstone samples,providing assistance for dynamic rock-breaking and disaster prevention in cold regions.
基金Project(52108361)supported by the National Natural Science Foundation of ChinaProjects(BK20231217,BK20220265)supported by the Basic Research Program of Jiangsu Province,China+5 种基金Project(sklhse-KF-2025-D-02)supported by the Open Research Fund Program of the State Key Laboratory of Hydroscience and Engineering,ChinaProject(2023ZB15)supported by the Independent Research Project of the State Key Laboratory of Subtropical Building and Urban Science,ChinaProject(SKLGME023001)supported by the Key Laboratory of Geomechanics and Geotechnical Engineering Safety,the Chinese Academy of SciencesProject(2025A04J3992)supported by the Basic and Applied Basic Research Project of the Guangzhou Science and Technology Bureau,ChinaProject(SKLGP2022Z015)supported by the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection Independent Research Project,ChinaProjects(2023YFS0436,2024NSFSC1715)supported by the Science and Technology Department of Sichuan Province,China。
文摘Steep bedding slopes are widely distributed in Southwestern China’s mountainous regions and have complex seismic responses and instability risks,causing casualties and property losses.Considering the high-seismic-intensity environment,the dynamic failure evolution and instability mechanism of high-steep bedding slopes are simulated via the discrete element method and shaking table test.The dynamic response characteristics and cumulative failure effects of slopes subjected to continuous ground motion are investigated.The results show that the dynamic response characteristics of slopes under continuous earthquakes are influenced by geological and topographic conditions.Elevation has a distinct impact on both the slope interior and surface,with amplification effects more pronounced on the surface.The weak interlayers have different influences on the dynamic amplification effect of slopes.Weak interlayers have dynamic magnification effects on the slope surface at relative elevations of 0-0.33 and 0.82-1.0 but have weakening effects between 0.33 and 0.82.Moreover,the weak interlayers also have controlling effects on the dynamic instability mode of slopes.The characteristics of intergranular contact failure,fracture propagation,and displacement distribution are analyzed to reveal the dynamic failure evolution and instability mechanism through the discrete-element model.The dynamic instability process of slopes includes three stages:fracture initiation(0-0.2g),fracture expansion(0.2g-0.3g),and sliding instability(0.3g-0.6g).This work can provide a valuable reference for the seismic stability and reinforcement of complex slopes.
文摘The dynamics model of the transmission system of the internal grinder is established on the bases of Riccati transfer matrix. The dynamic characteristics of the internal grinder are obtained by analyzing the relationship between dynamic modal flexibility and modal flexibility, which is used to find out the dangerous model of the transmission system and its weak areas. Then design parameters of weak areas are modified, the new one from the old structure is put forward, and the dynamic characteristics of new ...
基金support from the National Natural Science Foundation of China(No.52271287)funding from the State Key Laboratory of Hydraulic Engineering Intelligent Construction and Operation,Tianjin University。
文摘During the hoisting process of the offshore substation,changes in the hoisting speed can affect the hoisting system.Therefore,this study set four different speed conditions for the lifting and lowering stages of the installation process,and studied the impact of different lifting and lowering speeds on the hoisting system under the same environmental conditions through numerical simulation.The results show that during the lifting operation,as the lifting speed increases,the swing motion of the substation and the installation vessel tends to decrease,and the faster the hoisting speed,the more obvious the swing suppression of the substation and the installation vessel,and the smaller the fluctuation in the tension amplitude of the slings and mooring lines.In contrast,during the lowering operation,as the lowering speed increases,the swing motion of the substation and the installation vessel tends to increase,and the faster the lowering speed,the more obvious the swing amplification effect of the substation and the installation vessel.Therefore,during hoisting operations,increasing the lifting speed and reducing the lowering speed can mitigate the motion performance of the hoisting coupling system,reduce the tension amplitude variation of the sling and mooring,and ensure the smooth progress of the hoisting operation.
基金The National Natural Science Foundation of China (No.5047507, 50775036)the High Technology Research Program of Jiangsu Province (No.BG2006035)the Natural Science Foundation of JiangsuProvince (No.BK2009612)
文摘A dynamics model of the self-aligning ball bearing is proposed based on the Jones-Harris method （JHM）, and a computer program is developed to solve the equations by using the Newton-Raphson method. A parametric analysis of the centrifugal force and the gyroscopic moment, the contact loads, the contact angles, the radial deformation and the radial stiffness is carried out. The analytical results show that the applied loads and the rotational speed are two main factors that can influence the distributions of the contact loads and values of the contact angles. The centrifugal force and the gyroscopic moment increase with the increase in the rotational speed, resulting in the decrease of the inner raceway contact load and the increase of the outer raceway contact load. The outer raceway contact angle increases under the centrifugal force; on the contrary, the inner raceway contact angle decreases. Furthermore, the differences between the inner and the outer contact angles increase with the increase in the rotational speed. The higher rotational speed results in the decrease in radial stiffness for the self-aligning ball bearing, and the raceway curvature coefficient, to some extent, also influences the radial stiffness.
基金Supported by National Natural Science Foundation of China(Grant Nos.51205121,51375162)Scientific Research Foundation of Hunan Provincial Education Department of China(Grant No.13A023)Postgraduate Innovation Foundation of Hunan University of Science and Technology,China(Grant No.S140020)
文摘The inner and outer oil film dynamic characteristic coefficients of floating ring bearings（FRBs） change due to the manufacturing tolerance of the floating ring, journal and intermediate, which leads to high-speed turbocharger＇s vibration too large and even causes nonlinear vibration accident. However, the investigation of floating ring bearing manufacturing tolerance clearance on the rotordynamic characteristics is less at present. In order to study the influence law of inner and outer clearance on turbocharger vibration, the rotor dynamic motion equations of turbocharger supported in FRBs are derived by analyzing the size relations between floating ring, journal and intermediate for the inner and outer oil film clearances, the time transient response analysis for combination of FRBs clearance are developed. A realistic turbocharger is taken as a research object, the FE model of the turbocharger with FRBs is modeled. Under the conditions of four kinds of limit state bearing clearances for inner and outer oil film, the nonlinear transient analyses are performed based on the established FE dynamic models of the nonlinear rotor-FRBs system applied incentive combinations of gravity and unbalance force, respectively. From the waterfall, the simulation results show that the speed for the appearance of fractional frequency is not identical and the amplitude magnitude is different under the four kinds of bearing manufacturing tolerance limit clearances, and fractional frequency does not appear in the turbocharger and the amplitude is minimum under the ODMin/IDMax bearing manufacturing tolerance clearances. The turbocharger vibration is reduced by controlling the manufacturing tolerance clearance combinations of FRBs, which is helpful for the dynamic design and production-manufacturing of high-speed turbocharger.
基金Project supported by the National Natural Science Foundation of China (NSFC) (No. 50978056)the NSFC for Young Scholars (No. 50908046)the PhD Programs Foundation of MOE of China (No. 200802861012)
文摘A 3D finite element model for the Taizhou Yangtze River Bridge,the first triple-tower long-span suspension bridge in China,is established based on the nonlinear finite element software ABAQUS,and the dynamic characteristics of the bridge are analyzed using the LANCZOS eigenvalue solution method. The study focuses on the effects of the vertical,lateral and torsional stiffness of the steel box girder,the rigid central buckle and the elastic restraints connecting the towers and the steel box girder on the dynamic characteristics of the triple-tower suspension bridge. Our results show that,in general,the dynamic characteristics of the triple-tower suspension bridge are similar to those of two-tower suspension bridges. The vertical,lateral and torsional stiffness of the steel box girder have different effects on the dynamic characteristics of triple-tower suspension bridges. The elastic re-straints have a more significant effect on the dynamic characteristics than the central buckle,and decreasing the stiffness of the elastic restraints results in the appearance of a longitudinal floating vibration mode of the bridge. Also,rigid central buckles have a greater influence on the dynamic characteristics of triple-tower suspension bridges than on those of two-tower suspension bridges. The results obtained could serve as a valuable numerical reference for analyzing and designing super-long-span triple-tower suspension bridges.
