Railway noise barriers are an essential piece of infrastructure for reducing noise propagation.However,these barriers experience aerodynamic loads generated by high-speed trains,leading to dynamic effects that may com...Railway noise barriers are an essential piece of infrastructure for reducing noise propagation.However,these barriers experience aerodynamic loads generated by high-speed trains,leading to dynamic effects that may compromise their fatigue capacity.The most common structural design for railway noise barriers consists of vertical configurations of posts and panels.However,there have been few dynamic analyses of steel post/wood panel noise barriers under train-induced aerodynamic loads.This study used dynamic finite element analysis to assess the dynamic behavior of such noise barriers.Analysis of a 40-m-long noise barrier model and a triangular simplified load model,the latter of which effectively represented the detailed aerodynamic load,were first used to establish the model and input of the moving load during dynamic simulation.Then,the effects of different parameters on the dynamic response of the noise barrier were evaluated,including the damping ratio,the profile of the steel post,the span length of the panel,the barrier height,and the train speed.Gray relational analysis indicated that barrier height exhibited the highest correlations with the dynamic responses,followed by train speed,post profile,span length,and damping ratio.A reduction in the natural frequency and an increase in the train speed result in a higher peak response and more pronounced fluctuations between the nose and tail waves.The dynamic amplification factor(DAF)was found to be related to both the natural frequency and train speed.A model was proposed showing that the DAF significantly increases as the square of the natural frequency decreases and the cube of the train speed rises.展开更多
Load frequency control(LFC)is a critical function to balance the power consumption and generation.Thegrid frequency is a crucial indicator for maintaining balance.However,the widely used information and communication ...Load frequency control(LFC)is a critical function to balance the power consumption and generation.Thegrid frequency is a crucial indicator for maintaining balance.However,the widely used information and communication infrastructure for LFC increases the risk of being attacked by malicious actors.The dynamic load altering attack(DLAA)is a typical attack that can destabilize the power system,causing the grid frequency to deviate fromits nominal value.Therefore,in this paper,we mathematically analyze the impact of DLAA on the stability of the grid frequency and propose the network parameter regulation(NPR)to mitigate the impact.To begin with,the dynamic LFC model is constructed by highlighting the importance of the network parameter.Then,we model the DLAA and analyze its impact on LFC using the theory of second-order dynamic systems.Finally,we model the NPR and prove its effect in mitigating the DLAA.Besides,we construct a least-effort NPR considering its infrastructure cost and aim to reduce the operation cost.Finally,we carry out extensive simulations to demonstrate the impact of the DLAA and evaluate the mitigation performance of NPR.The proposed cost-benefit NPR approach can not only mitigate the impact of DLAA with 100%and also save 41.18$/MWh in terms of the operation cost.展开更多
Significant diurnal temperature variations in mountainous rack railways cause stiffness mismatches between the rack structure and simply supported bridges,leading to critical failures like bolt loosening and rack frac...Significant diurnal temperature variations in mountainous rack railways cause stiffness mismatches between the rack structure and simply supported bridges,leading to critical failures like bolt loosening and rack fractures.This study develops a dynamic model of the vehicle-rack-bridge system based on train-track-bridge interaction theory,integrating gear-rack meshing and wheel-rail contact mechanisms.The model analyzes the dynamic response of bridges with varying spans under combined thermal and dynamic loading.Numerical simulations,conducted using finite element analysis,reveal peak vibration accelerations of 1.3 m/s^(2)for the rack,3.0 m/s^(2)for the rail,1.2 m/s^(2)for the sleeper,and 0.1 m/s^(2)for the bridge,with maximum stresses of 3 MPa in the rack,8 MPa in the rail,and 25 MPa in connecting bolts.The results show significant span-dependent amplification of stress and strain in the rack system under thermo-mechanical loading,exceeding material strength limits at 60-meter spans.An innovative elastic connection method is proposed to mitigate stress concentrations effectively,en-hancing system durability.This study introduces a novel approach to modeling complex thermo-mechanical interactions in rack railway systems,validated through extensive simulations,and provides a practical solution for improving structural resilience,offering theoretical guidance for optimizing rack-bridge system design to ensure operational safety in extreme environmental conditions.展开更多
Based on MTS Landmark 370.50 rock dynamic and static load fatigue test system and acoustic emission(AE)monitoring method,the damage characteristics and energy evolution law of high static load coal-rock combination(CR...Based on MTS Landmark 370.50 rock dynamic and static load fatigue test system and acoustic emission(AE)monitoring method,the damage characteristics and energy evolution law of high static load coal-rock combination(CRC)under the influence of dynamic load parameters were studied.The main results are as follows:1)Dynamic load increases the rheological properties and damage fracture development of CRC.With the increase of the amplitude and frequency of the dynamic load,the number of dynamic load cycles required for the failure of the CRC decreases,the irreversible strain increases,and the failure of sample accelerates;2)The AE positioning events during the loading process of the specimen decrease with the increase of the dynamic load amplitude,and increase with the increase of the dynamic load frequency;3)The fractal dimension,total energy and cumulative elastic energy of the broken particles of the CRC increase with the increase of the amplitude and frequency of the dynamic load.The fractal dimension corresponding to the increase of the dynamic load frequency is larger,and the energy and cumulative elastic energy corresponding to the increase of the dynamic load amplitude are larger.展开更多
The frequent or occasional impact loads pose serious threats to the service safety of conventional concrete structures in tunnel.In this paper,a novel three-dimensional mesoscopic model of steel fiber reinforced concr...The frequent or occasional impact loads pose serious threats to the service safety of conventional concrete structures in tunnel.In this paper,a novel three-dimensional mesoscopic model of steel fiber reinforced concrete(SFRC)is constructed by discrete element method.The model encompasses the concrete matrix,aggregate,interfacial transition zone and steel fibers,taking into account the random shape of the coarse aggregate and the stochastic distribution of steel fibers.It captures microscopic-level interactions among the coarse aggregate,steel fibers,and matrix.Subsequently,a comprehensive procedure is formulated to calibrate the microscopic parameters required by the model,and the reliability of the model is verified by comparing with the experimental results.Furthermore,a coupled finite difference method-discrete element method approach is used to construct the model of the split Hopkinson pressure bar.Compression tests are simulated on SFRC specimens with varying steel fiber contents under static and dynamic loading conditions.Finally,based on the advantages of DEM analysis at the mesoscopic level,this study analyzed mechanisms of enhancement and crack arrest in SFRC.It shed a light on the perspectives of interface failure process,microcrack propagation,contact force field evolution and energy analysis,offering valuable insights for related mining engineering applications.展开更多
Web pillars enduring complex coupled loads are critical for stability in high-wall mining.This study develops a dynamic failure criterion for web pillars under non-uniform loading using catastrophe theory.Through the ...Web pillars enduring complex coupled loads are critical for stability in high-wall mining.This study develops a dynamic failure criterion for web pillars under non-uniform loading using catastrophe theory.Through the analysis of the web pillar-overburden system’s dynamic stress and deformation,a total potential energy function and dynamic failure criterion were established for web pillars.An optimizing method for web pillar parameters was developed in highwall mining.The dynamic criterion established was used to evaluate the dynamic failure and stability of web pillars under static and dynamic loading.Key findings reveal that vertical displacements exhibit exponential-trigonometric variation under static loads and multi-variable power-law behavior under dynamic blasting.Instability risks arise when the roof’s tensile strength-to-stress ratio drops below 1.Using catastrophe theory,the bifurcation setΔ<0 signals sudden instability.The criterion defines failure as when the unstable web pillar section length l1 exceeds the roof’s critical collapse distance l2.Case studies and simulations determine an optimal web pillar width of 4.6 m.This research enhances safety and resource recovery,providing a theoretical framework for advancing highwall mining technology.展开更多
In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data be...In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data benchmark(HIS)has garnered the most attention due to its practicality and effectiveness.However,existing CPM reviews usually focus on the theoretical benchmark,and there is a lack of an in-depth review that thoroughly explores HIS-based methods.In this article,a comprehensive overview of HIS-based CPM is provided.First,we provide a novel static-dynamic perspective on data-level manifestations of control performance underlying typical controller capacities including regulation and servo:static and dynamic properties.The static property portrays time-independent variability in system output,and the dynamic property describes temporal behavior driven by closed-loop feedback.Accordingly,existing HIS-based CPM approaches and their intrinsic motivations are classified and analyzed from these two perspectives.Specifically,two mainstream solutions for CPM methods are summarized,including static analysis and dynamic analysis,which match data-driven techniques with actual controlling behavior.Furthermore,this paper also points out various opportunities and challenges faced in CPM for modern industry and provides promising directions in the context of artificial intelligence for inspiring future research.展开更多
To elucidate the dynamic characteristics of in-situ methane deflagration in coalbed methane wellbores and its mechanisms for fracturing coal rock,this study first developed a simulation experimental system specificall...To elucidate the dynamic characteristics of in-situ methane deflagration in coalbed methane wellbores and its mechanisms for fracturing coal rock,this study first developed a simulation experimental system specifically designed for methane in-situ deflagration fracturing.This experimental system,which is capable of withstanding pressures up to 150 MPa and meanwhile applying axial and confining pressures of up to 50 MPa to rock cores,enables the coupled simulation on methane deflagration and rock core fracturing processes.With the aid of this experimental system,physical simulation experiments on in-situ methane deflagration fracturing were conducted,and the following findings were obtained.Methane deflagration loads in enclosed wellbores exhibit characteristics of multi-level pulsed oscillation.With the rise of initial gas pressure,the peak deflagration load increases approximately linearly,with the pressure amplification factor spanning from 23.14 to 31.10,and its peak loading rate grows exponentially.Accordingly,the fracture volume and fracture porosity augment.To be specific,when the initial gas pressure rises from 0.6 to 2.4 MPa,the fracture volume and fracture porosity augment by factors of 14.0 and 8.73,respectively.The fractal dimension of spatial distribution of fractures also increases with the rise of deflagration load,indicating that a higher deflagration load conduces to the development of a larger and more complex fracture network.Methane deflagration fracturing is characterized as a composite fracture mode that involves the impact of strong stress waves and the driving force of high-pressure fluids.The primary factors influencing damage to coal-rock include the high-stress impact in the initial stage of deflagration,the fluid pressure driving effect in the middle stage,and the thermal shock resulting from high temperatures in the later stage.展开更多
The presence of geological structures such as faults, joints, and dykes has been observed near excavation boundaries in many rockburst case histories. In this paper, the role of discontinuities around tunnels in rockb...The presence of geological structures such as faults, joints, and dykes has been observed near excavation boundaries in many rockburst case histories. In this paper, the role of discontinuities around tunnels in rockburst occurrence was studied. For this purpose, the Abaqus explicit code was used to simulate dynamic rock failure in deep tunnels. Material heterogeneity was considered using Python scripting in Abaqus. Rockbursts near fault regions in deep tunnels under static and dynamic loads were studied.Several tunnel models with and without faults were built and static and dynamic loads were used to simulate rock failure. The velocity and the released kinetic energy of failed rocks, the failure zone around the tunnel, and the deformed mesh were studied to identify stable and unstable rock failures. Compared with models without discontinuities, the results showed that the velocity and the released kinetic energy of failed rocks were higher, the failure zone around the tunnel was larger, and the mesh was more deformed in the models with discontinuities, indicating that rock failure in the models with discontinuities was more violent. The modeling results confirm that the presence of geological structures in the vicinity of deep excavations could be one of the major influence factors for the occurrence of rockburst. It can explain localized rockburst occurrence in civil tunnels and mining drifts. The presented methodology in this paper for rockburst analysis can be useful for rockburst anticipation and control during mining and tunneling in highly stressed ground.展开更多
To investigate the bedding influence on coal mechanical behaviour in underground environments such as coal or rock burst, simulations of dynamic SHPB tests of pre-stressed coal specimens with different bedding angles ...To investigate the bedding influence on coal mechanical behaviour in underground environments such as coal or rock burst, simulations of dynamic SHPB tests of pre-stressed coal specimens with different bedding angles were carried out using a particle flow code 2-dimensional(PFC2D). Three impact velocities of 4, 8 and 12 m/s were selected to study dynamic behaviours of coal containing bedding planes under different dynamic loads. The simulation results showed that the existence of bedding planes leads to the degradation of the mechanical properties and their weakening effect significantly depends on the angle h between the bedding planes and load direction. With h increaseing from 0° to 90°, the strength first decreased and subsequently increased and specimens became most vulnerable when h was 30° or 45°.Five failure modes were observed in the specimens in the context of macro-cracks. Furthermore, energy characteristics combined with ultimate failure patterns revealed that maximum accumulated energy and failure intensity have a positive relation with the strength of specimen. When bedding planes were parallel or perpendicular to loading direction, specimens absorbed more energy and experienced more violent failure with increased number of cracks. In contrast, bedding planes with h of 30° or 45° reduced the specimens' ability of storing strain energy to the lowest with fewer cracks observed after failure.展开更多
The stability control of surrounding rock for large or super-large section chamber is a difficult technical problem in deep mining condition.Based on the in-site geological conditions of Longgu coal mine,this paper us...The stability control of surrounding rock for large or super-large section chamber is a difficult technical problem in deep mining condition.Based on the in-site geological conditions of Longgu coal mine,this paper used the dynamic module of FLAC3D to study the response characteristics of deep super-large section chamber under dynamic and static combined loading condition.Results showed that under the static loading condition,the maximum vertical stress,deformation and failure range are large,where the stress concentration coefficient is 1.64.The maximum roof-to-floor and two-sides deformations are 54.6 mm and 53.1 mm,respectively.Then,under the dynamic and static combined loading condition:(1)The influence of dynamic load frequency on the two-sides is more obvious;(2)The dynamic load amplitude has the greatest influence on the stress concentration degree,and the plastic failure tends to develop to the deeper;(3)With the dynamic load source distance increase,the response of surrounding rock is gradually attenuated.On this basis,empirical equations for each dynamic load conditions were obtained by using regression analysis method,and all correlation coefficients are greater than 0.99.This research provided reference for the supporting design of deep super-large section chamber under same or similar conditions.展开更多
Borehole pressure relief helps prevent rock bursts.However,this may change the physical and mechan-ical properties of the surrounding rock,affect the variation of the plastic zone of the roadway,and lead to the failur...Borehole pressure relief helps prevent rock bursts.However,this may change the physical and mechan-ical properties of the surrounding rock,affect the variation of the plastic zone of the roadway,and lead to the failure of roadway support,thus threatening the safety of the roadway.In this paper,the variable angle shear test of drilled specimens under the action of static and dynamic loads is used to study the evolution of mechanical parameters of the specimens and their influence on the plastic zone of the sur-rounding rock.The shear strength decreases linearly with the increase of drilling diameter.With the increase of pre-static load level and dynamic load amplitude,the cohesion first increases and then decreases,and the internal friction angle decreases.Moreover,the shear failure surface changes from rough to smooth.The reasons include that the static load enhances the tooth cutting effect and the repeated friction of cracks caused by the dynamic load.Borehole pressure relief leads to an increase in the radius of the plastic zone of the surrounding rock following a quadratic function.The research results of this paper provide a theoretical basis for designing drilling unloading parameters and supporting parameters for rock burst roadways.展开更多
In rock engineering,the cyclic shear characteristics of rough joints under dynamic disturbances are still insufficiently studied.This study conducted cyclic shear experiments on rough joints under dynamic normal loads...In rock engineering,the cyclic shear characteristics of rough joints under dynamic disturbances are still insufficiently studied.This study conducted cyclic shear experiments on rough joints under dynamic normal loads to assess the impact of shear frequency(f_(h))and shear displacement amplitude(u_(d))on the frictional properties of the joint.The results reveal that within a single shearing cycle,the normal displacement negatively correlates with the dynamic normal force.As the shear cycle number increases,the joint surface undergoes progressive wear,resulting in an exponential decrease in the peak normal displacement.In the cyclic shearing procedure,the forward peak values of shear force and friction coefficient display larger fluctuations at either lower or higher shear frequencies.However,under moderate shear frequency conditions,the changes in the shear strength of the joint surface are smaller,and the degree of degradation post-shearing is relatively limited.As the shear displacement amplitude increases,the range of normal deformation within the joint widens.Furthermore,after shearing,the corresponding joint roughness coefficient trend shows a gradual decrease with an increasing shear displacement amplitude,while varying with the shearing frequency in a pattern that initially rises and then falls,with a turning point at 0.05 Hz.The findings of this research contribute to a profound comprehension of the cyclic frictional properties of rock joints under dynamic disturbances.展开更多
Rock drilling machine,INSTRON testing system,and SHPB device are updated to investigate the characteristics of rocks at great depth,with high loads from overburden,tectonic stresses and dynamic impacts due to blasting...Rock drilling machine,INSTRON testing system,and SHPB device are updated to investigate the characteristics of rocks at great depth,with high loads from overburden,tectonic stresses and dynamic impacts due to blasting and boring.It is verified that these testing systems can be used to study the mechanical properties of rock material under coupled static and dynamic loading condition and give useful guidance for the deep mining and underground cavern excavation.Various tests to determine the rock strength,fragmentation behavior,and energy absorption were conducted using the updated testing systems.It is shown that under coupled static-dynamic loads,if the axial prestress is lower than its elastic limit,the rock strength is higher than the individual static or dynamic strength.At the same axial prestress,rock strength under coupled loads rises with the increasing strain rates.Under coupled static and dynamic loads,rock is observed to fail with tensile mode.While shear failure may exist if axial prestress is high enough.In addition,it is shown that the percentage of small particles increases with the increasing axial prestress and impact load based on the analysis of the particle-size distribution of fragments.It is also suggested that the energy absorption ratio of a specimen varies with coupled loads,and the maximum energy absorption ratio for a rock can be obtained with an appropriate combination of static and dynamic loads.展开更多
This paper establishes a method for identifying and locating dynamic loads in time-varying systems.The proposed method linearizes time-varying parameters within small time units and uses the Wilson-θ inverse analysis...This paper establishes a method for identifying and locating dynamic loads in time-varying systems.The proposed method linearizes time-varying parameters within small time units and uses the Wilson-θ inverse analysis method to solve modal loads of each order at each time step.It then uses an exhaustive method to determine the load position.Finally,it calculates the time history of the load.Simulation examples demonstrate how the number of measuring points and step size affect load identi-fication accuracy,verifying that this algorithm achieves good identification accuracy for loads under resonance conditions.Additionally,it explores how noise affects load position and recognition accuracy,while providing a solution.Simulation examples and experimental results demonstrate that the proposed method can identify both the time history and position of loads simultaneously with high identification accuracy.展开更多
The deep fissured rock mass is affected by coupled effects of initial ground stress and external dynamic disturbance.In order to study the effect of internal flaw on pre-stressed rock mechanical responses and failure ...The deep fissured rock mass is affected by coupled effects of initial ground stress and external dynamic disturbance.In order to study the effect of internal flaw on pre-stressed rock mechanical responses and failure behavior under impact loading,intact granite specimens and specimens with different flaw inclinations are tested by a modified split Hopkinson pressure bar(SHPB)and digital image correlation(DIC)method.The results show that peak strain and dynamic strength of intact specimens and specimens with different flaw angles(α)decrease with the increase of axial static pressure.The 90°flaw has weak reduction effect on peak strain,dynamic strength and combined strength,while 45°and 0°flaws have remarkable reduction effect.Specimens with 90°flaw are suffered combined shear and tensile failure under middle and low axial static pre-stresses,and suffered shear failure under high axial static pre-stresses.Specimens with 45°and 0°flaws are suffered oblique shear failure caused by pre-existing flaw under different axial static pre-stresses.Besides,based on digital image correlation method,it is found that micro-cracks before formation of macro fractures(include shear and tensile fractures)belong to tensile cracks.Tensile and shear strain localizations at pre-existing flaw tip for specimen with 45°and 0°flaws are produced much earlier than that at other positions.展开更多
Through-silicon via(TSV)is an important technique in three-dimension integration.The mechanical performance of TSV-Cu is critical to the electrical performance and signal transmission.In this work,the deformation of s...Through-silicon via(TSV)is an important technique in three-dimension integration.The mechanical performance of TSV-Cu is critical to the electrical performance and signal transmission.In this work,the deformation of single-crystalline TSV-Cu during annealing process was studied using molecular dynamics method.The protrusion morphology and protrusion height of Cu column were revealed.The protrusion height curves can be divided into four stages:slow increase,fast increase,fast decrease,and saturation.During the deformation process,the main deformation mode is temporary amorphous region followed by residual dislocations.The influences of annealing temperatures,heating rates,and column sizes on protrusion height were studied.Results show that the residual protrusion height increases with increasing annealing temperatures and decreasing heating rates.The residual protrusion height increases with increasing column sizes in terms of column diameter and length.This work provides new insights into understanding the mechanical performance of nano-TSV-Cu.展开更多
The stability control of fissured rock is difficult,especially under static and dynamic loads in deep coal mines.In this paper,the dynamic mechanical properties,strain rate evolution and energy dissipation of fissured...The stability control of fissured rock is difficult,especially under static and dynamic loads in deep coal mines.In this paper,the dynamic mechanical properties,strain rate evolution and energy dissipation of fissured and anchored rocks were respectively obtained by SHPB tests.It was found that bolt can provide supporting efficiency-improving effect for fissured rock against dynamic disturbance,and this effect increased quadratically with decrease in anchoring angles.Then,the energy dissipation mechanism of anchored rock was obtained by slipping model.Furthermore,bolt energy-absorbing mechanism by instantaneous tensile-shear deformation was expressed based on material mechanics,which was the larger the anchoring angle,the smaller the energy absorption,and the less the contribution to supporting efficiency improvement.On this basis,the functional relationship between energy dissipation of anchored rock and energy absorption of bolt was established.Taking the coal-gangue separation system of Longgu coal mine as an example,the optimal anchoring angle can be determined as 57.5°–67.5°.Field monitoring showed fissured rock with the optimal anchoring angle,can not only effectively control the deformation,but also fully exert the energy-absorbing and efficiency-improving effect of bolt itself.This study provides guidance to the stability control and supporting design for deep engineering under the same or similar conditions.展开更多
The mechanism by which electromagnetic forming(EMF)enhances the formability of metals is unclear owing to the coupling effect of multi-physics fields.In the present work,the associated formability improvement mechanis...The mechanism by which electromagnetic forming(EMF)enhances the formability of metals is unclear owing to the coupling effect of multi-physics fields.In the present work,the associated formability improvement mechanisms were qualitatively categorized and illustrated.This was realized by comparing the formability of fully annealed 2219 aluminum alloy(AA 2219-O)sheet under quasi-static(QS),electromagnetic dynamic(EM),and mechanical dynamic(MD)tensile loadings.It was found that the forming limit of AA 2219-O sheet under EM tensile loading was significantly(45.4%)higher than that under QS tensile loading,and was marginally(3.7%–4.3%)higher than that under MD tensile loading.In addition,the forming limit of AA 2219-O sheet demonstrated a negative dependency on the strain rate within the range of the dynamic tensile tests conducted.The deformation conditions common to EM and MD tensile loadings were responsible for the significant formability improvement compared with QS tensile loading.In particular,the inertial effect was dominant.The different deformation conditions that distinguish EM tensile loading from MD tensile loading resulted in the marginal improvement in formability.This was caused by the absence of a sustaining contact force at the later deformation stage and the lower strain rate.The body force exerted little influence on the formability improvement,and the thermal effect under the two dynamic tensile loadings was negligible.展开更多
Static disorder plays a crucial role in the electronic dynamics and spec-troscopy of complex molecular sys-tems.Traditionally,obtaining ob-servables averaged over static disor-der requires thousands of realiza-tions v...Static disorder plays a crucial role in the electronic dynamics and spec-troscopy of complex molecular sys-tems.Traditionally,obtaining ob-servables averaged over static disor-der requires thousands of realiza-tions via direct sampling of the dis-order distribution,leading to high computational costs.In this work,we extend the auxiliary degree-of-freedom based matrix product state(MPS)method to handle system-bath correlated thermal equilibrium initial states,which can capture static disorder effects using a one-shot quantum dynamical simulation.We validate the effectiveness of the extended method by computing the dipole-dipole time correlation function of the Holstein model relevant to the emission spectrum of molecular aggregates.Our results show that the one-shot method is very accu-rate with only a moderate increase in MPS bond dimension,thereby significantly reducing computational cost.Moreover,it enables the generation of a much larger number of samples than the conventional direct sampling method at negligible additional cost,thus reducing sta-tistical errors.This method provides a broadly useful tool for calculating equilibrium time cor-relation functions in system-bath coupled models with static disorder.展开更多
基金financially supported by the Swedish Transport Administration(Trafikverket)through the“Excellence Area 4”and FOI-BBT program(Grant Nos.BBT-2019-022 and BBT-TRV 2024/132497).
文摘Railway noise barriers are an essential piece of infrastructure for reducing noise propagation.However,these barriers experience aerodynamic loads generated by high-speed trains,leading to dynamic effects that may compromise their fatigue capacity.The most common structural design for railway noise barriers consists of vertical configurations of posts and panels.However,there have been few dynamic analyses of steel post/wood panel noise barriers under train-induced aerodynamic loads.This study used dynamic finite element analysis to assess the dynamic behavior of such noise barriers.Analysis of a 40-m-long noise barrier model and a triangular simplified load model,the latter of which effectively represented the detailed aerodynamic load,were first used to establish the model and input of the moving load during dynamic simulation.Then,the effects of different parameters on the dynamic response of the noise barrier were evaluated,including the damping ratio,the profile of the steel post,the span length of the panel,the barrier height,and the train speed.Gray relational analysis indicated that barrier height exhibited the highest correlations with the dynamic responses,followed by train speed,post profile,span length,and damping ratio.A reduction in the natural frequency and an increase in the train speed result in a higher peak response and more pronounced fluctuations between the nose and tail waves.The dynamic amplification factor(DAF)was found to be related to both the natural frequency and train speed.A model was proposed showing that the DAF significantly increases as the square of the natural frequency decreases and the cube of the train speed rises.
基金supported by the project Major Scientific and Technological Special Project of Guizhou Province([2024]014).
文摘Load frequency control(LFC)is a critical function to balance the power consumption and generation.Thegrid frequency is a crucial indicator for maintaining balance.However,the widely used information and communication infrastructure for LFC increases the risk of being attacked by malicious actors.The dynamic load altering attack(DLAA)is a typical attack that can destabilize the power system,causing the grid frequency to deviate fromits nominal value.Therefore,in this paper,we mathematically analyze the impact of DLAA on the stability of the grid frequency and propose the network parameter regulation(NPR)to mitigate the impact.To begin with,the dynamic LFC model is constructed by highlighting the importance of the network parameter.Then,we model the DLAA and analyze its impact on LFC using the theory of second-order dynamic systems.Finally,we model the NPR and prove its effect in mitigating the DLAA.Besides,we construct a least-effort NPR considering its infrastructure cost and aim to reduce the operation cost.Finally,we carry out extensive simulations to demonstrate the impact of the DLAA and evaluate the mitigation performance of NPR.The proposed cost-benefit NPR approach can not only mitigate the impact of DLAA with 100%and also save 41.18$/MWh in terms of the operation cost.
基金Supported by the Sichuan Science and Technology Program(Grant Nos.2021YFD0211,2023ZDZX0011).
文摘Significant diurnal temperature variations in mountainous rack railways cause stiffness mismatches between the rack structure and simply supported bridges,leading to critical failures like bolt loosening and rack fractures.This study develops a dynamic model of the vehicle-rack-bridge system based on train-track-bridge interaction theory,integrating gear-rack meshing and wheel-rail contact mechanisms.The model analyzes the dynamic response of bridges with varying spans under combined thermal and dynamic loading.Numerical simulations,conducted using finite element analysis,reveal peak vibration accelerations of 1.3 m/s^(2)for the rack,3.0 m/s^(2)for the rail,1.2 m/s^(2)for the sleeper,and 0.1 m/s^(2)for the bridge,with maximum stresses of 3 MPa in the rack,8 MPa in the rail,and 25 MPa in connecting bolts.The results show significant span-dependent amplification of stress and strain in the rack system under thermo-mechanical loading,exceeding material strength limits at 60-meter spans.An innovative elastic connection method is proposed to mitigate stress concentrations effectively,en-hancing system durability.This study introduces a novel approach to modeling complex thermo-mechanical interactions in rack railway systems,validated through extensive simulations,and provides a practical solution for improving structural resilience,offering theoretical guidance for optimizing rack-bridge system design to ensure operational safety in extreme environmental conditions.
基金Project(51874281)supported by the National Natural Science Foundation of ChinaProject(2024M752698)supported by China Postdoctoral Science FoundationProject(2025WLKXJ041)supported by the Graduate Innovation Program of China University of Mining and Technology。
文摘Based on MTS Landmark 370.50 rock dynamic and static load fatigue test system and acoustic emission(AE)monitoring method,the damage characteristics and energy evolution law of high static load coal-rock combination(CRC)under the influence of dynamic load parameters were studied.The main results are as follows:1)Dynamic load increases the rheological properties and damage fracture development of CRC.With the increase of the amplitude and frequency of the dynamic load,the number of dynamic load cycles required for the failure of the CRC decreases,the irreversible strain increases,and the failure of sample accelerates;2)The AE positioning events during the loading process of the specimen decrease with the increase of the dynamic load amplitude,and increase with the increase of the dynamic load frequency;3)The fractal dimension,total energy and cumulative elastic energy of the broken particles of the CRC increase with the increase of the amplitude and frequency of the dynamic load.The fractal dimension corresponding to the increase of the dynamic load frequency is larger,and the energy and cumulative elastic energy corresponding to the increase of the dynamic load amplitude are larger.
基金financial support by the National Natural Science Foundation of China(52174101&52408310)Guangdong Basic and Applied Basic Research Foundation(2023A1515011634&2024A1515012528)Guangdong Provincial Department of Science and Technology(2021ZT09G087)for the research.
文摘The frequent or occasional impact loads pose serious threats to the service safety of conventional concrete structures in tunnel.In this paper,a novel three-dimensional mesoscopic model of steel fiber reinforced concrete(SFRC)is constructed by discrete element method.The model encompasses the concrete matrix,aggregate,interfacial transition zone and steel fibers,taking into account the random shape of the coarse aggregate and the stochastic distribution of steel fibers.It captures microscopic-level interactions among the coarse aggregate,steel fibers,and matrix.Subsequently,a comprehensive procedure is formulated to calibrate the microscopic parameters required by the model,and the reliability of the model is verified by comparing with the experimental results.Furthermore,a coupled finite difference method-discrete element method approach is used to construct the model of the split Hopkinson pressure bar.Compression tests are simulated on SFRC specimens with varying steel fiber contents under static and dynamic loading conditions.Finally,based on the advantages of DEM analysis at the mesoscopic level,this study analyzed mechanisms of enhancement and crack arrest in SFRC.It shed a light on the perspectives of interface failure process,microcrack propagation,contact force field evolution and energy analysis,offering valuable insights for related mining engineering applications.
基金supported by the National Natural Science Foundation of China(Nos.52204136,52474100,and 52204092).
文摘Web pillars enduring complex coupled loads are critical for stability in high-wall mining.This study develops a dynamic failure criterion for web pillars under non-uniform loading using catastrophe theory.Through the analysis of the web pillar-overburden system’s dynamic stress and deformation,a total potential energy function and dynamic failure criterion were established for web pillars.An optimizing method for web pillar parameters was developed in highwall mining.The dynamic criterion established was used to evaluate the dynamic failure and stability of web pillars under static and dynamic loading.Key findings reveal that vertical displacements exhibit exponential-trigonometric variation under static loads and multi-variable power-law behavior under dynamic blasting.Instability risks arise when the roof’s tensile strength-to-stress ratio drops below 1.Using catastrophe theory,the bifurcation setΔ<0 signals sudden instability.The criterion defines failure as when the unstable web pillar section length l1 exceeds the roof’s critical collapse distance l2.Case studies and simulations determine an optimal web pillar width of 4.6 m.This research enhances safety and resource recovery,providing a theoretical framework for advancing highwall mining technology.
基金supported in part by the National Natural Science Foundation of China(62125306)Zhejiang Key Research and Development Project(2024C01163)the State Key Laboratory of Industrial Control Technology,China(ICT2024A06)
文摘In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data benchmark(HIS)has garnered the most attention due to its practicality and effectiveness.However,existing CPM reviews usually focus on the theoretical benchmark,and there is a lack of an in-depth review that thoroughly explores HIS-based methods.In this article,a comprehensive overview of HIS-based CPM is provided.First,we provide a novel static-dynamic perspective on data-level manifestations of control performance underlying typical controller capacities including regulation and servo:static and dynamic properties.The static property portrays time-independent variability in system output,and the dynamic property describes temporal behavior driven by closed-loop feedback.Accordingly,existing HIS-based CPM approaches and their intrinsic motivations are classified and analyzed from these two perspectives.Specifically,two mainstream solutions for CPM methods are summarized,including static analysis and dynamic analysis,which match data-driven techniques with actual controlling behavior.Furthermore,this paper also points out various opportunities and challenges faced in CPM for modern industry and provides promising directions in the context of artificial intelligence for inspiring future research.
基金National Key Research and Development Program of China,2020YFA0711800,Ting LiuNational Natural Science Foundation of China,52274241,Ting Liu,52474261,Ting Liu+2 种基金Basic Research Program of Jiangsu,BK20240207,Ting Liuthe Fundamental Research Funds for the Central Universities(2023KYJD1007)China Postdoctoral Science Foundation(2022M722672).
文摘To elucidate the dynamic characteristics of in-situ methane deflagration in coalbed methane wellbores and its mechanisms for fracturing coal rock,this study first developed a simulation experimental system specifically designed for methane in-situ deflagration fracturing.This experimental system,which is capable of withstanding pressures up to 150 MPa and meanwhile applying axial and confining pressures of up to 50 MPa to rock cores,enables the coupled simulation on methane deflagration and rock core fracturing processes.With the aid of this experimental system,physical simulation experiments on in-situ methane deflagration fracturing were conducted,and the following findings were obtained.Methane deflagration loads in enclosed wellbores exhibit characteristics of multi-level pulsed oscillation.With the rise of initial gas pressure,the peak deflagration load increases approximately linearly,with the pressure amplification factor spanning from 23.14 to 31.10,and its peak loading rate grows exponentially.Accordingly,the fracture volume and fracture porosity augment.To be specific,when the initial gas pressure rises from 0.6 to 2.4 MPa,the fracture volume and fracture porosity augment by factors of 14.0 and 8.73,respectively.The fractal dimension of spatial distribution of fractures also increases with the rise of deflagration load,indicating that a higher deflagration load conduces to the development of a larger and more complex fracture network.Methane deflagration fracturing is characterized as a composite fracture mode that involves the impact of strong stress waves and the driving force of high-pressure fluids.The primary factors influencing damage to coal-rock include the high-stress impact in the initial stage of deflagration,the fluid pressure driving effect in the middle stage,and the thermal shock resulting from high temperatures in the later stage.
基金Financial supports from the Natural Sciences and Engineering Research Council(NSERC)of Canada(CRDPJ 418932-11)Vale,LKAB,CEMI,MIRARCO,and the Open Research Fund of the State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(Grant No.Z015001)for this work are gratefully acknowledged
文摘The presence of geological structures such as faults, joints, and dykes has been observed near excavation boundaries in many rockburst case histories. In this paper, the role of discontinuities around tunnels in rockburst occurrence was studied. For this purpose, the Abaqus explicit code was used to simulate dynamic rock failure in deep tunnels. Material heterogeneity was considered using Python scripting in Abaqus. Rockbursts near fault regions in deep tunnels under static and dynamic loads were studied.Several tunnel models with and without faults were built and static and dynamic loads were used to simulate rock failure. The velocity and the released kinetic energy of failed rocks, the failure zone around the tunnel, and the deformed mesh were studied to identify stable and unstable rock failures. Compared with models without discontinuities, the results showed that the velocity and the released kinetic energy of failed rocks were higher, the failure zone around the tunnel was larger, and the mesh was more deformed in the models with discontinuities, indicating that rock failure in the models with discontinuities was more violent. The modeling results confirm that the presence of geological structures in the vicinity of deep excavations could be one of the major influence factors for the occurrence of rockburst. It can explain localized rockburst occurrence in civil tunnels and mining drifts. The presented methodology in this paper for rockburst analysis can be useful for rockburst anticipation and control during mining and tunneling in highly stressed ground.
基金the Chinese Scholarship Council (No. 201706370022) for the financial support to the joint Ph.D. programme at the University of Wollongong,Australia
文摘To investigate the bedding influence on coal mechanical behaviour in underground environments such as coal or rock burst, simulations of dynamic SHPB tests of pre-stressed coal specimens with different bedding angles were carried out using a particle flow code 2-dimensional(PFC2D). Three impact velocities of 4, 8 and 12 m/s were selected to study dynamic behaviours of coal containing bedding planes under different dynamic loads. The simulation results showed that the existence of bedding planes leads to the degradation of the mechanical properties and their weakening effect significantly depends on the angle h between the bedding planes and load direction. With h increaseing from 0° to 90°, the strength first decreased and subsequently increased and specimens became most vulnerable when h was 30° or 45°.Five failure modes were observed in the specimens in the context of macro-cracks. Furthermore, energy characteristics combined with ultimate failure patterns revealed that maximum accumulated energy and failure intensity have a positive relation with the strength of specimen. When bedding planes were parallel or perpendicular to loading direction, specimens absorbed more energy and experienced more violent failure with increased number of cracks. In contrast, bedding planes with h of 30° or 45° reduced the specimens' ability of storing strain energy to the lowest with fewer cracks observed after failure.
基金Project(2018YFC0604703)supported by the National Key R&D Program of ChinaProjects(51804181,51874190)supported by the National Natural Science Foundation of China+3 种基金Project(ZR2018QEE002)supported by the Shandong Province Natural Science Fund,ChinaProject(ZR2018ZA0603)supported by the Major Program of Shandong Province Natural Science Foundation,ChinaProject(2019GSF116003)supported by the Key R&D Project of Shandong Province,ChinaProject(SDKDYC190234)supported by the Shandong University of Science and Technology,Graduate Student Technology Innovation Project,China。
文摘The stability control of surrounding rock for large or super-large section chamber is a difficult technical problem in deep mining condition.Based on the in-site geological conditions of Longgu coal mine,this paper used the dynamic module of FLAC3D to study the response characteristics of deep super-large section chamber under dynamic and static combined loading condition.Results showed that under the static loading condition,the maximum vertical stress,deformation and failure range are large,where the stress concentration coefficient is 1.64.The maximum roof-to-floor and two-sides deformations are 54.6 mm and 53.1 mm,respectively.Then,under the dynamic and static combined loading condition:(1)The influence of dynamic load frequency on the two-sides is more obvious;(2)The dynamic load amplitude has the greatest influence on the stress concentration degree,and the plastic failure tends to develop to the deeper;(3)With the dynamic load source distance increase,the response of surrounding rock is gradually attenuated.On this basis,empirical equations for each dynamic load conditions were obtained by using regression analysis method,and all correlation coefficients are greater than 0.99.This research provided reference for the supporting design of deep super-large section chamber under same or similar conditions.
基金supported by the National Natural Science Foundation of China(Nos.52374100,52525401,and 52304150)Outstanding Young Talent Project of Shanxi Province(No.SJYC2024301)Research Project Supported by Shanxi Scholarship Council of China(No.2023-041).
文摘Borehole pressure relief helps prevent rock bursts.However,this may change the physical and mechan-ical properties of the surrounding rock,affect the variation of the plastic zone of the roadway,and lead to the failure of roadway support,thus threatening the safety of the roadway.In this paper,the variable angle shear test of drilled specimens under the action of static and dynamic loads is used to study the evolution of mechanical parameters of the specimens and their influence on the plastic zone of the sur-rounding rock.The shear strength decreases linearly with the increase of drilling diameter.With the increase of pre-static load level and dynamic load amplitude,the cohesion first increases and then decreases,and the internal friction angle decreases.Moreover,the shear failure surface changes from rough to smooth.The reasons include that the static load enhances the tooth cutting effect and the repeated friction of cracks caused by the dynamic load.Borehole pressure relief leads to an increase in the radius of the plastic zone of the surrounding rock following a quadratic function.The research results of this paper provide a theoretical basis for designing drilling unloading parameters and supporting parameters for rock burst roadways.
基金funding support from the National Natural Science Foundation of China(Grant Nos.52174092 and 51904290)the Natural Science Foundation of Jiangsu Province,China(Grant No.BK20220157).
文摘In rock engineering,the cyclic shear characteristics of rough joints under dynamic disturbances are still insufficiently studied.This study conducted cyclic shear experiments on rough joints under dynamic normal loads to assess the impact of shear frequency(f_(h))and shear displacement amplitude(u_(d))on the frictional properties of the joint.The results reveal that within a single shearing cycle,the normal displacement negatively correlates with the dynamic normal force.As the shear cycle number increases,the joint surface undergoes progressive wear,resulting in an exponential decrease in the peak normal displacement.In the cyclic shearing procedure,the forward peak values of shear force and friction coefficient display larger fluctuations at either lower or higher shear frequencies.However,under moderate shear frequency conditions,the changes in the shear strength of the joint surface are smaller,and the degree of degradation post-shearing is relatively limited.As the shear displacement amplitude increases,the range of normal deformation within the joint widens.Furthermore,after shearing,the corresponding joint roughness coefficient trend shows a gradual decrease with an increasing shear displacement amplitude,while varying with the shearing frequency in a pattern that initially rises and then falls,with a turning point at 0.05 Hz.The findings of this research contribute to a profound comprehension of the cyclic frictional properties of rock joints under dynamic disturbances.
基金Supported by the National Natural Science Foundation of China (10872218,50934006,50534030)Research Foundation for the Doctoral Program of Higher Education of China (200805331143)
文摘Rock drilling machine,INSTRON testing system,and SHPB device are updated to investigate the characteristics of rocks at great depth,with high loads from overburden,tectonic stresses and dynamic impacts due to blasting and boring.It is verified that these testing systems can be used to study the mechanical properties of rock material under coupled static and dynamic loading condition and give useful guidance for the deep mining and underground cavern excavation.Various tests to determine the rock strength,fragmentation behavior,and energy absorption were conducted using the updated testing systems.It is shown that under coupled static-dynamic loads,if the axial prestress is lower than its elastic limit,the rock strength is higher than the individual static or dynamic strength.At the same axial prestress,rock strength under coupled loads rises with the increasing strain rates.Under coupled static and dynamic loads,rock is observed to fail with tensile mode.While shear failure may exist if axial prestress is high enough.In addition,it is shown that the percentage of small particles increases with the increasing axial prestress and impact load based on the analysis of the particle-size distribution of fragments.It is also suggested that the energy absorption ratio of a specimen varies with coupled loads,and the maximum energy absorption ratio for a rock can be obtained with an appropriate combination of static and dynamic loads.
基金supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions.
文摘This paper establishes a method for identifying and locating dynamic loads in time-varying systems.The proposed method linearizes time-varying parameters within small time units and uses the Wilson-θ inverse analysis method to solve modal loads of each order at each time step.It then uses an exhaustive method to determine the load position.Finally,it calculates the time history of the load.Simulation examples demonstrate how the number of measuring points and step size affect load identi-fication accuracy,verifying that this algorithm achieves good identification accuracy for loads under resonance conditions.Additionally,it explores how noise affects load position and recognition accuracy,while providing a solution.Simulation examples and experimental results demonstrate that the proposed method can identify both the time history and position of loads simultaneously with high identification accuracy.
基金Project(2019JJ20028)supported by the Outstanding Youth Science Foundations of Hunan Province of ChinaProject(51774321)supported by the National Natural Science Foundation of ChinaProject(2018YFC0604606)supported by the State Key Research Development Program of China。
文摘The deep fissured rock mass is affected by coupled effects of initial ground stress and external dynamic disturbance.In order to study the effect of internal flaw on pre-stressed rock mechanical responses and failure behavior under impact loading,intact granite specimens and specimens with different flaw inclinations are tested by a modified split Hopkinson pressure bar(SHPB)and digital image correlation(DIC)method.The results show that peak strain and dynamic strength of intact specimens and specimens with different flaw angles(α)decrease with the increase of axial static pressure.The 90°flaw has weak reduction effect on peak strain,dynamic strength and combined strength,while 45°and 0°flaws have remarkable reduction effect.Specimens with 90°flaw are suffered combined shear and tensile failure under middle and low axial static pre-stresses,and suffered shear failure under high axial static pre-stresses.Specimens with 45°and 0°flaws are suffered oblique shear failure caused by pre-existing flaw under different axial static pre-stresses.Besides,based on digital image correlation method,it is found that micro-cracks before formation of macro fractures(include shear and tensile fractures)belong to tensile cracks.Tensile and shear strain localizations at pre-existing flaw tip for specimen with 45°and 0°flaws are produced much earlier than that at other positions.
基金financially supported by the National Natural Science Foundation of China(12232008 and 12072211)the Foundation of Key laboratory(2022JCJQLB05703)the Sichuan Province Science and Technology Project(2023NSFSC0914).
文摘Through-silicon via(TSV)is an important technique in three-dimension integration.The mechanical performance of TSV-Cu is critical to the electrical performance and signal transmission.In this work,the deformation of single-crystalline TSV-Cu during annealing process was studied using molecular dynamics method.The protrusion morphology and protrusion height of Cu column were revealed.The protrusion height curves can be divided into four stages:slow increase,fast increase,fast decrease,and saturation.During the deformation process,the main deformation mode is temporary amorphous region followed by residual dislocations.The influences of annealing temperatures,heating rates,and column sizes on protrusion height were studied.Results show that the residual protrusion height increases with increasing annealing temperatures and decreasing heating rates.The residual protrusion height increases with increasing column sizes in terms of column diameter and length.This work provides new insights into understanding the mechanical performance of nano-TSV-Cu.
基金the financial support from the National Natural Science Foundation of China(Nos.52374094,52174122 and 52374218)Excellent Youth Fund of Shandong Natural Science Foundation(No.ZR2022YQ49)Taishan Scholar Project in Shandong Province(Nos.tspd20210313 and tsqn202211150)。
文摘The stability control of fissured rock is difficult,especially under static and dynamic loads in deep coal mines.In this paper,the dynamic mechanical properties,strain rate evolution and energy dissipation of fissured and anchored rocks were respectively obtained by SHPB tests.It was found that bolt can provide supporting efficiency-improving effect for fissured rock against dynamic disturbance,and this effect increased quadratically with decrease in anchoring angles.Then,the energy dissipation mechanism of anchored rock was obtained by slipping model.Furthermore,bolt energy-absorbing mechanism by instantaneous tensile-shear deformation was expressed based on material mechanics,which was the larger the anchoring angle,the smaller the energy absorption,and the less the contribution to supporting efficiency improvement.On this basis,the functional relationship between energy dissipation of anchored rock and energy absorption of bolt was established.Taking the coal-gangue separation system of Longgu coal mine as an example,the optimal anchoring angle can be determined as 57.5°–67.5°.Field monitoring showed fissured rock with the optimal anchoring angle,can not only effectively control the deformation,but also fully exert the energy-absorbing and efficiency-improving effect of bolt itself.This study provides guidance to the stability control and supporting design for deep engineering under the same or similar conditions.
基金financially supported by the National Natural Science Foundation of China(Nos.51575206 and 51705169)the Innovation Funds for Aerospace Science and Technology from China Aerospace Science and Technology Corporation(No.CASC150704)+1 种基金the Science Fund of State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body(No.31615006)the Fundamental Research Funds for the Central University(No.2016YXZD055)。
文摘The mechanism by which electromagnetic forming(EMF)enhances the formability of metals is unclear owing to the coupling effect of multi-physics fields.In the present work,the associated formability improvement mechanisms were qualitatively categorized and illustrated.This was realized by comparing the formability of fully annealed 2219 aluminum alloy(AA 2219-O)sheet under quasi-static(QS),electromagnetic dynamic(EM),and mechanical dynamic(MD)tensile loadings.It was found that the forming limit of AA 2219-O sheet under EM tensile loading was significantly(45.4%)higher than that under QS tensile loading,and was marginally(3.7%–4.3%)higher than that under MD tensile loading.In addition,the forming limit of AA 2219-O sheet demonstrated a negative dependency on the strain rate within the range of the dynamic tensile tests conducted.The deformation conditions common to EM and MD tensile loadings were responsible for the significant formability improvement compared with QS tensile loading.In particular,the inertial effect was dominant.The different deformation conditions that distinguish EM tensile loading from MD tensile loading resulted in the marginal improvement in formability.This was caused by the absence of a sustaining contact force at the later deformation stage and the lower strain rate.The body force exerted little influence on the formability improvement,and the thermal effect under the two dynamic tensile loadings was negligible.
基金supported by the National Natural Science Foundation of China(No.22273005 and No.22422301)the Innovation Program for Quantum Science and Technology(No.2023ZD0300200)+1 种基金the National Security Academic Foundation(No.U2330201)the Fundamental Research Funds for the Central Universities.
文摘Static disorder plays a crucial role in the electronic dynamics and spec-troscopy of complex molecular sys-tems.Traditionally,obtaining ob-servables averaged over static disor-der requires thousands of realiza-tions via direct sampling of the dis-order distribution,leading to high computational costs.In this work,we extend the auxiliary degree-of-freedom based matrix product state(MPS)method to handle system-bath correlated thermal equilibrium initial states,which can capture static disorder effects using a one-shot quantum dynamical simulation.We validate the effectiveness of the extended method by computing the dipole-dipole time correlation function of the Holstein model relevant to the emission spectrum of molecular aggregates.Our results show that the one-shot method is very accu-rate with only a moderate increase in MPS bond dimension,thereby significantly reducing computational cost.Moreover,it enables the generation of a much larger number of samples than the conventional direct sampling method at negligible additional cost,thus reducing sta-tistical errors.This method provides a broadly useful tool for calculating equilibrium time cor-relation functions in system-bath coupled models with static disorder.
