The interaction between the airflow and train influences the aerodynamic characteristics and dynamic performance of high-speed trains.This study focused on the fluid-solid coupling effect of airflow and HST,and propos...The interaction between the airflow and train influences the aerodynamic characteristics and dynamic performance of high-speed trains.This study focused on the fluid-solid coupling effect of airflow and HST,and proposed a co-simulation(CS)approach between computational fluid dynamics and multi-body dynamics.Firstly,the aerodynamic model was developed by employing overset mesh technology and the finite volume method,and the detailed train-track coupled dynamic model was established.Then the User Data Protocol was adopted to build data communication channels.Moreover,the proposed CS method was validated by comparison with a reported field test result.Finally,a case study of the HST exiting a tunnel subjected to crosswind was conducted to compare differences between CS and offline simulation(OS)methods.In terms of the presented case,the changing trends of aerodynamic forces and car-body displacements calculated by the two methods were similar.Differences mainly lie in aerodynamic moments and transient wheel-rail impacts.Maximum pitching and yawing moments on the head vehicle in the two methods differ by 21.1 kN∙m and 29.6 kN∙m,respectively.And wheel-rail impacts caused by sudden changes in aerodynamic loads are significantly severer in CS.Wheel-rail safety indices obtained by CS are slightly greater than those by OS.This research proposes a CS method for aerodynamic characteristics and dynamic performance of the HST in complex scenarios,which has superiority in computational efficiency and stability.展开更多
A novel bidirectional tuned rolling mass damper(Bi-TRMD)device is proposed,and its dynamic character-istics and vibration reduction performance are investigated.The device achieves the performance goal of bidirectiona...A novel bidirectional tuned rolling mass damper(Bi-TRMD)device is proposed,and its dynamic character-istics and vibration reduction performance are investigated.The device achieves the performance goal of bidirectional vibration reduction for a tuned rolling mass damper with a single concave structure.First,the Bi-TRMD device is introduced,and its three-dimensional(3D)mechanical model is established.The motion equations of the model are de-rived using the Gibbs-Appell equation,and a trajectory pre-diction method for the sphere and structure within the model is developed.This method demonstrates that the rolling motion of the sphere around orthogonal axes is nearly indepen-dent within a limited range,enabling the simplification of the 3D model into a two-dimensional(2D)model.The accuracy of this simplification is validated through case analysis.The vibration reduction parameters are optimized using the 2D model and Den Hartog theory,leading to the derivation of mathematical expressions for the optimal frequency ratio and damping ratio.Subsequently,the bidirectional vi-bration reduction performance of the Bi-TRMD is analyzed.The results show that under white noise excitation,the Bi-TRMD achieves a bidirectional peak acceleration reduction rate that is 9.92%and 7.79%higher than that of translational tuned mass dampers(TMD)with the same mass.These findings demonstrate that the proposed Bi-TRMD ef-fectively achieves two-directional vibration reduction with a single concave structure,offering superior vibration reduction performance.展开更多
In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic tr...In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic triaxial tester.A scanning electron microscope(SEM)was employed to assess the soil samples after dynamic testing.The results indicate that the dynamic characteristics of lacustrine soft clay were significantly affected by confining pressure and water content.A quantitative relationship was established among confining pressures,water content,and the dynamic shear modulus ratio.The dynamic characteristic parameters of undisturbed,remolded and saturated soil are obviously different,and the original structure can enhance the shear strength of soil.By comparing the results with those from other studies,we found that the dynamic characters of soft clays were considerably varied in different regions,and lacustrine soft clays had a larger dynamic shear modulus ratio and a smaller damping ratio when the dynamic shear strain was large.Using IPP software to process the microstructural images,we found that the soil was dominated by small pores and medium particles,and the roundness of pores and particles had an apparently positive correlation with the maximum diameter.Moreover,the pores and particles of the soil showed fractal characteristics and directionality,and the fractal dimensions and probability entropy were strongly correlated with the macrostructural parameters.Finally,we developed a prediction model for macrostructural and microstructural parameters.展开更多
The coal dynamic characteristic stress identification under dynamic load is important for guiding underground mineral mining and predicting underground dynamic disasters.In this article,the dynamic compression test of...The coal dynamic characteristic stress identification under dynamic load is important for guiding underground mineral mining and predicting underground dynamic disasters.In this article,the dynamic compression test of anthracite under five strain rates is carried out,the evolution law of three kinds of crack characteristic stress is analyzed,and a prediction model of the crack characteristic stress threshold considering the strain rate effect is established.Then,the rationality of crack characteristic stress under dynamic loading is discussed from the damage evolution standpoint,and the crack extension response mechanism during dynamic compression of anthracite is discussed.The result shows that the crack characteristic stress threshold is significantly influenced by the strain rate.The three characteristic stress thresholds are positively correlated with the strain rate,but the ratios to the crest stress gradually decrease.The increase in the strain rate strongly contributes to the crack extension behavior of anthracite.In the crack unstable extension phase,because of the increase of the strain rate,anthracite shows more energy dissipation under the same deformation in association with the stress concentration effect and the dynamic strength enhancement effect.The crack propagation rate is increased,the crack propagation path of the section is more complex,and more severe damage occurs before the dynamic failure of anthracite,which leads to even more severe damage.展开更多
This study aims to establish an integrated sensitivity analysis framework for optimization and design of the dynamic performance of mechanical systems such as tracked vehicles,by combining the direct differentiation m...This study aims to establish an integrated sensitivity analysis framework for optimization and design of the dynamic performance of mechanical systems such as tracked vehicles,by combining the direct differentiation method(DDM)with the linear multibody system transfer matrix method(linear MSTMM).The rigid-flexible coupled multibody system dynamics model of a tracked vehicle is established using the linear MSTMM and validated through the modal test.Building upon the existing DDM-based eigenvalue sensitivity analysis method within the linear MSTMM,the DDM is embedded into it to enable programmable and efficient computation of dynamic response sensitivities for mechanical systems.The proposed approach is used to quantitatively evaluate the sensitivities of both natural vibration characteristics(e.g.,natural frequencies and mode shapes)and transient dynamic responses of the tracked vehicle with respect to system parameters,successfully identifying critical structural parameters.Compared to conventional finite difference methods,the developed methodology eliminates sensitivity to perturbation step sizes.The contributions of this work lie in establishing a unified theoretical foundation and analysis framework for guiding dynamics optimization and design of mechanical systems,and extending the applicability of the linear MSTMM to sensitivity analysis of transient dynamic responses.展开更多
MgO has been shown to facilitate the precipitation of MgO-rich crystalline phases within the MgO-CaO-Al_(2)O_(3)-SiO_(2)(MCAS)glassy inclusion system,which possesses a high liquidus temperature and a significant Young...MgO has been shown to facilitate the precipitation of MgO-rich crystalline phases within the MgO-CaO-Al_(2)O_(3)-SiO_(2)(MCAS)glassy inclusion system,which possesses a high liquidus temperature and a significant Young’s modulus.The underlying linkage between the structural evolution and the crystallization characteristics of the MCAS system was systematically investigated using molecular dynamics simulation and thermodynamic calculation.The results revealed that Mg^(2+) ions played a dual role,constructing networks through the formation of tricluster oxygens while consuming bridging oxygens(BOs)in a mechanism similar to Ca^(2+) ions.However,despite this dual role,the network connectivity was still decreased with the increase in MgO/(MgO+Al_(2)O_(3))(M/(M+A))and CaO/(CaO+SiO_(2))(C/(C+S))ratios,primarily due to the reduction in BOs.This microscopic structural evolution resulted in a reduction in viscosity and an enhancement of crystallization ability.Furthermore,the remarkable diffusion capability of Mg^(2+) ions,coupled with the increased proportion of 6-coordinated Mg^(2+)ions,unveiled the mechanism underlying the precipitation of MgSiO_(3) and Mg_(2)SiO_(4) crystals,which exhibited high Young’s moduli of 165.23 and 196.67 GPa,respectively.To prevent the precipitation of MgO-rich crystalline phases,it was crucial to maintain the M/(M+A)ratio below 0.42 and the C/(C+S)ratio below 0.16 within the MCAS system.展开更多
In this paper,a modeling method for a pantograph-catenary system is put forward to investigate the dynamic contact behavior in space,taking into consideration of the appearance characteristics of the contact surfaces ...In this paper,a modeling method for a pantograph-catenary system is put forward to investigate the dynamic contact behavior in space,taking into consideration of the appearance characteristics of the contact surfaces of the pantograph and catenary.The dynamic performance of the pantograph-catenary system,including contact forces,accelerations,and the corresponding spectra,is analyzed.Furthermore,with the modeling method,the influences of contact wire irregularity and the vibration caused by the front pantograph on the rear pantograph for a pantograph-catenary system with double pantographs are investigated.The results show that the appearance characteristics of the contact surfaces play an important role in the dynamic contact behavior.The appearance characteristics should be considered to reasonably evaluate the dynamic performance of the pantograph-catenary system.展开更多
High speed on/off valve(HSV)is an essential component in aerospace digital hydraulic systems(ADHS).Dynamic performance and temperature rising characteristic are two important features,which determine the performance o...High speed on/off valve(HSV)is an essential component in aerospace digital hydraulic systems(ADHS).Dynamic performance and temperature rising characteristic are two important features,which determine the performance of HSV,and affect the response speed and reliability of ADHS.Increasing the driving voltage is an effective method for improving the dynamic performance of HSV.However,continuous high voltage excitation will lead to more wasted energy,higher temperature rising and lower reliability.To solve this problem,a pre-excitation control algorithm(PECA)is proposed in this paper based on the theoretical model of the influence of electrical parameters on dynamic performance and temperature rising characteristics.In PECA,an appropriate initial coil current is generated by pre-excitation instead of increasing driving voltage,which significantly shortens the switching delay time.Then,based on real-time current online calculation and feedback mechanism,the adaptive switching of five equivalent voltages is realized.Consequently,the coil current can be rapidly kept at the expected state without consuming more energy and generating more heat.Results indicate that compared with conventional PWM control algorithm,the PECA can improve dynamic performance of HSV,shorten the total switching time by 71.5%,and increase the maximum operation frequency.Therefore,the linear area of flow characteristic is expended by 80.0%,the adjusting time of HSV-controlled system is reduced by 23%,while shortening steady error by 46.7%.Moreover,the temperature rising characteristics of HSV are better,the maximum operation temperature is reduced by 68.6%,and the time to reach the steady state temperature is shortened by 20%.From the results,it can be concluded that the PECA is not only an effective and practical control algorithm for improving the performance of HSVs and HSV-controlled systems while reducing the heat generation and decreasing the temperature rising of HSV,but also can be a potential solution in ADHS.展开更多
Experimental investigation on the aerodynamic performance and aeroacoustic characteristics of model rotors with different tip anhedral angles in hover are conducted in the paper.Three sets of model rotors with blade-t...Experimental investigation on the aerodynamic performance and aeroacoustic characteristics of model rotors with different tip anhedral angles in hover are conducted in the paper.Three sets of model rotors with blade-tip anhedral angle 0°(reference rotor),20°and 45°respectively are designed to analyze the influence of the anhedral angle on the hovering performance and aeroacoustics of rotor.In the environment of anechoic chamber,the hover experiments under the different collective pitch and blade numbers,are carried out to measure the figure of merit(FM),time history of sound pressure and sound pressure level(SPL)of the three rotor models.Based on test results,the comparison and analysis of hovering performance and aeroacoustic characteristics among the three rotor models have been done.Meanwhile,for the sake of analysis,the rotor wake and blade pressure distribution are simulated by means of computational fluid method(CFD).At last,some conclusions about the effects of blade-tip anhedral angle on the aerodynamic performance and aeroacoustic characteristics in hover are obtained.An anhedral blade tip can enhance the FM of the rotor,and decrease the rotor loads noise to some extent.展开更多
This study aimed to investigate the effect of fatigue characteristics on the static and dynamic performance of Eucommia ulmoides gum isolators, and to explore the performance changes of Eucommia ulmoides gum isolators...This study aimed to investigate the effect of fatigue characteristics on the static and dynamic performance of Eucommia ulmoides gum isolators, and to explore the performance changes of Eucommia ulmoides gum isolators with different formulations. For this purpose, we used five formulations of Eucommia ulmoides gum isolators and set different fatigue test methods to study the static and dynamic performance changes of Eucommia ulmoides gum isolators with different formulations by changing the amplitude. The experimental results showed that the addition of Eucommia ulmoides gum had an impact on the performance of the isolator, and the number of fatigue cycles would lead to the hardening of the Eucommia ulmoides gum isolator and changes in its static and dynamic performance. In the range of two million vibrations, the performance change of the isolator was significant in the early stage and then tended to be flat, indicating that the impact of fatigue on the performance of the isolator would not continue to persist. It is worth noting that the study found that the addition of 30% Eucommia ulmoides gum had the least impact on the performance of the isolator under fatigue. Therefore, for long-term use of Eucommia ulmoides gum isolators, attention should be paid to their fatigue characteristics to ensure their stability and reliability. Additionally, this study provides a reference for the design and application of Eucommia ulmoides gum isolators. In summary, this study provides important reference value for a deeper understanding of the fatigue characteristics of Eucommia ulmoides gum isolators and for ensuring their stable and reliable performance. .展开更多
The deformation characteristics of silty soils under vibrational loads can easily change due to the wetting process,leading to the failure of roadbed structures.Commonly used methods for improving silty soils in engin...The deformation characteristics of silty soils under vibrational loads can easily change due to the wetting process,leading to the failure of roadbed structures.Commonly used methods for improving silty soils in engineering often yield unsatisfactory economic and ecological outcomes.As an environment-friendly soil improvement material,Xanthan gum has broad application prospects and is therefore considered a solidifying agent for enhancing silty soil properties in the Yellow River Basin.In this study,a series of tests is conducted using a scanning electron microscope and a dynamic triaxial testing apparatus to investigate the microstructure and dynamic deformation characteristics of unsaturated silty soil with varying xanthan gum contents during the wetting process.The results show that xanthan gum effectively fills voids between soil particles and adheres to their surfaces,forming fibrous and network structures.This modification enhances the inherent properties of the silty soil and significantly improves its stability under dynamic loading.Specifically,with increasing xanthan gum content,the dynamic shear modulus increases while the damping ratio decreases.During the wetting process,as suction decreases,the dynamic shear modulus decreases while the damping ratio increases.Xanthan gum reduces the sensitivity of the dynamic deformation characteristics of the treated silty soil to changes in suction levels.Finally,based on the modified Hardin-Drnevich hyperbolic model,a predictive model for the dynamic shear modulus and damping ratio of treated silty soil is proposed,considering the xanthan gum content.These research findings provide a theoretical basis for the construction and maintenance of water conservancy,slope stabilization,and roadbed projects in the Yellow River Basin.展开更多
In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data be...In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data benchmark(HIS)has garnered the most attention due to its practicality and effectiveness.However,existing CPM reviews usually focus on the theoretical benchmark,and there is a lack of an in-depth review that thoroughly explores HIS-based methods.In this article,a comprehensive overview of HIS-based CPM is provided.First,we provide a novel static-dynamic perspective on data-level manifestations of control performance underlying typical controller capacities including regulation and servo:static and dynamic properties.The static property portrays time-independent variability in system output,and the dynamic property describes temporal behavior driven by closed-loop feedback.Accordingly,existing HIS-based CPM approaches and their intrinsic motivations are classified and analyzed from these two perspectives.Specifically,two mainstream solutions for CPM methods are summarized,including static analysis and dynamic analysis,which match data-driven techniques with actual controlling behavior.Furthermore,this paper also points out various opportunities and challenges faced in CPM for modern industry and provides promising directions in the context of artificial intelligence for inspiring future research.展开更多
The growth of computing power in data centers(DCs)leads to an increase in energy consumption and noise pollution of air cooling systems.Chip-level cooling with high-efficiency coolant is one of the promising methods t...The growth of computing power in data centers(DCs)leads to an increase in energy consumption and noise pollution of air cooling systems.Chip-level cooling with high-efficiency coolant is one of the promising methods to address the cooling challenge for high-power devices in DCs.Hybrid nanofluid(HNF)has the advantages of high thermal conductivity and good rheological properties.This study summarizes the numerical investigations of HNFs in mini/micro heat sinks,including the numerical methods,hydrothermal characteristics,and enhanced heat transfer technologies.The innovations of this paper include:(1)the characteristics,applicable conditions,and scenarios of each theoretical method and numerical method are clarified;(2)the molecular dynamics(MD)simulation can reveal the synergy effect,micro motion,and agglomeration morphology of different nanoparticles.Machine learning(ML)presents a feasiblemethod for parameter prediction,which provides the opportunity for the intelligent regulation of the thermal performance of HNFs;(3)the HNFs flowboiling and the synergy of passive and active technologies may further improve the overall efficiency of liquid cooling systems in DCs.This review provides valuable insights and references for exploring the multi-phase flow and heat transport mechanisms of HNFs,and promoting the practical application of HNFs in chip-level liquid cooling in DCs.展开更多
A high-density tungsten-zirconium-titanium(W-Zr-Ti)reactive alloy was prepared by powder metallurgy.This alloy exhibits high density,high strength,and violent energy release characteristics,resulting in outstanding pe...A high-density tungsten-zirconium-titanium(W-Zr-Ti)reactive alloy was prepared by powder metallurgy.This alloy exhibits high density,high strength,and violent energy release characteristics,resulting in outstanding penetration and ignition abilities.Dynamic impact experiment demonstrated its strain rate hardening effect,and the energetic characteristics were investigated by digital image processing technique and thermal analysis experiment.The results show that W-Zr-Ti reactive alloy performs compressive strength of 2.25 GPa at 5784 s^(-1)strain rate,and its exothermic reaction occurs at about 961 K.Based on the explosion test and shock wave theory,thresholds of enhanced damage effect are less than 35.77 GPa and 5.18×10^(4)kJ/m^(2)for shock pressure and energy,respectively.Furthermore,the transformation of fracture behavior and failure mechanism is revealed,which causes the increase in compressive strength and reaction intensity under dynamic loading.展开更多
The dynamic performance of high-speed trains is significantly influenced by sudden changes in aerodynamic loads(ADLs)when exiting a tunnel in a windy environment.Focusing on a double-track tunnel under construction in...The dynamic performance of high-speed trains is significantly influenced by sudden changes in aerodynamic loads(ADLs)when exiting a tunnel in a windy environment.Focusing on a double-track tunnel under construction in a mountain railway,we established an aerodynamic model involving a train exiting the tunnel,and verified it in the Fluent environment.Overset mesh technology was adopted to characterize the train’s movement.The flow field involving the train,tunnel,and crosswinds was simulated using the Reynolds-averaged turbulence model.Then,we built a comprehensive train-track coupled dynamic model considering the influences of ADLs,to investigate the vehicles’dynamic responses.The aerodynamics and dynamic behaviors of the train when affected by crosswinds with different velocities and directions are analyzed and discussed.The results show that the near-wall side crosswind leads to sharper variations in ADLs than the far-wall side crosswind.The leading vehicle suffers from more severe ADLs than other vehicles,which worsens the wheel-rail interaction and causes low-frequency vibration of the car body.When the crosswind velocity exceeds 20 m/s,significant wheel-rail impacts occur,and the running safety of the train worsens rapidly.展开更多
In this study, shaking table tests were performed to investigate the dynamic characteristics of a mold transformer. Based on the test results, rotary friction dampers were developed to mitigate the excessive lateral d...In this study, shaking table tests were performed to investigate the dynamic characteristics of a mold transformer. Based on the test results, rotary friction dampers were developed to mitigate the excessive lateral displacement that occurred along the direction of the weak stiffness axis of the mold transformer. In addition, shaking table tests were performed by attaching friction dampers to both sides of the mold transformer. Based on the shaking table test results, the natural frequency, mode vector, and damping ratio of the mold transformer were derived using the transfer function and half-power bandwidth. The test results indicated that the use of friction dampers can decrease the displacement and acceleration response of the mold transformer. Finally, dynamic structural models were established considering the component connectivity and mass distribution of the mold transformer. In addition, a numerical strategy was proposed to calibrate the stiffness coefficients of the mold transformer, thereby facilitating the relationship between generalized mass and stiffness. The results indicated that the analytical model based on the calibration strategy of stiffness coefficients can reasonably simulate the dynamic behavior of the mold transformer using friction dampers with regard to transfer function, displacement, and acceleration response.展开更多
The emissions from traditional fossil heavy-duty trucks have become a conspicuous issue worldwide.The electrical road system(ERS)can offer a viable solution for achieving zero CO_(2) emissions and has high energy effi...The emissions from traditional fossil heavy-duty trucks have become a conspicuous issue worldwide.The electrical road system(ERS)can offer a viable solution for achieving zero CO_(2) emissions and has high energy efficiency in long-distance road cargo transport.While many kinds of pantograph structures have been developed for the ERS,their corresponding pantograph-catenary dynamic characteristics under different road conditions have not been investigated.This work performs a numerical study on the dynamics of the pantograph-catenary interaction of an ERS considering different pantograph structures.First,a pantograph-catenary-truck-road model is proposed.The reduced catenary model and reduced-plate model transmission method are used to minimize model scale.Three different types of ERS pantograph structures are considered in the model.After validation,the pantograph-catenary dynamics under the influence of truck-road interactions with complex road roughness and different pantographs are studied and compared.The corresponding vibration transmission mechanism is further focused.The results show that the truck-road interaction has a significant effect on the pantograph-catenary interaction,but the pantograph with only one lower and upper armcan isolate the roll vibrationmotion transmission fromthe truck to the collector head,which has the best dynamic performance and is suggested for use in the ERS.展开更多
The influence of FT(freeze-thaw)cycles and average strain rate on the dynamic impact performance,energy evolution characteristics,and failure behavior of sandstone was studied through dynamic impact tests.Results disp...The influence of FT(freeze-thaw)cycles and average strain rate on the dynamic impact performance,energy evolution characteristics,and failure behavior of sandstone was studied through dynamic impact tests.Results displayed that the FT damage process of samples can be divided into three stages based on the changes in weight,porosity,and P-wave velocity.The dynamic peak strength,dynamic elastic modulus,and strength ratio decreased with increasing FT cycles,and increased with increasing average strain rate.Moreover,the average strain rate reduced the influence of FT cycles on dynamic peak strength.In general,the incident energy,reflected energy and dissipated energy increased with increasing average strain rate,the transmitted energy was negligibly affected by the average strain rate,and the energy dissipation ratio decreased with increasing average strain rate.In addition,the influence of FT cycles on each type of energy and energy dissipation ratio during sample failure was smaller than that of average strain rate.The average size of fragments can accurately demonstrate the impact of FT damage and average strain rate on dynamic peak strength and failure mode,and quantitatively evaluate the sample’s fragmentation degree.Fractal dimension varies with FT cycles and average strain rate,and the threshold is between 148.30 and 242.57 s^(-1).If the average strain rate is in the threshold range,the relationship between the fractal dimension and dynamic peak strength is more regular,otherwise,it will become complicated.The results reveal the dynamic failure mechanism of white sandstone samples,providing assistance for dynamic rock-breaking and disaster prevention in cold regions.展开更多
Transmission towers,serving as the support structure of transmission lines,are significant for the functional-ity of an electric transmission system.Bolt joint loosening is one of the critical factors that can affect ...Transmission towers,serving as the support structure of transmission lines,are significant for the functional-ity of an electric transmission system.Bolt joint loosening is one of the critical factors that can affect the safety and stability of transmission towers.In this study,the effects of bolt joint loosening on the dynamic characteristics of a 220-kV angle steel transmission tower are the main topic of concern.First,the mechanical properties of typical joints subjected to different degrees of bolt loosening are studied by finite solid-element simulation,based on which a finite hybrid-element modeling method is developed for a tower structure suffering varying loose degrees in the joints.Taking a 220-kV angle steel transmission tower as the object,the influence of the position and degree of loosening on the tower’s natural frequencies and mode shapes are simulated and discussed.The results demonstrate that the main-member splice joint and the main diagonal-horizontal member gusset plate joint account for the dominant impact on the dynamic characteristics of the tower.In addition,the dominant joint shifts from the main-member splice joint to the main diagonal-horizontal member gusset plate joint as the considered modal order increases.In the case of double joints loosening simultaneously,the loosening of nondomi-nant joints has nonnegligible effects on the tower as well.展开更多
The Propellant Feed System(PFS)is a crucial component of Electric Propulsion System(EPS)which is widely used in satellites for its high reliability and specific impulse.The Switching and Proportional Hybrid-controlled...The Propellant Feed System(PFS)is a crucial component of Electric Propulsion System(EPS)which is widely used in satellites for its high reliability and specific impulse.The Switching and Proportional Hybrid-controlled Xenon Feed System(SPHXFS)is a novel type of PFS with high flow regulation precision.This study develops a system-level simulation model with 75 components for the SPHXFS.The accuracy of the model is validated through the comparison with test data,showing an error of less than 3%during the startup phase and less than 0.1%after stabilization.The study analyzes the startup process and finds that the two-stage pressure reduction system avoids two-phase flow interference downstream,achieving a regulation accuracy of±0.1%.A long-term operation simulation of the system is conducted,revealing that pressure fluctuations occur upstream at 4767 s due to Bang-Bang control.However,with proportional control adjustments,these fluctuations do not affect the flow supply.Further research examines the impact of synchronous and asynchronous control modes of the Bang-Bang Valve(TPBBV)under the tank pressures of 6-10 MPa on the system's dynamic characteristics.It is found that the asynchronous control scheme results in a flow supply settling time that is 7.2-10s longer than the synchronous control scheme,with an overshoot increase of 4.1%-4.9%.These insights provide valuable reference and guidance for system optimization design and the formulation of operational strategies.展开更多
基金Supported by the Sichuan Science and Technology Program(Grant No.2023ZDZX0008)the National Natural Science Foundation of China(Grant No.52388102)the New Cornerstone Science Foundation through the XPLORER PRIZE.
文摘The interaction between the airflow and train influences the aerodynamic characteristics and dynamic performance of high-speed trains.This study focused on the fluid-solid coupling effect of airflow and HST,and proposed a co-simulation(CS)approach between computational fluid dynamics and multi-body dynamics.Firstly,the aerodynamic model was developed by employing overset mesh technology and the finite volume method,and the detailed train-track coupled dynamic model was established.Then the User Data Protocol was adopted to build data communication channels.Moreover,the proposed CS method was validated by comparison with a reported field test result.Finally,a case study of the HST exiting a tunnel subjected to crosswind was conducted to compare differences between CS and offline simulation(OS)methods.In terms of the presented case,the changing trends of aerodynamic forces and car-body displacements calculated by the two methods were similar.Differences mainly lie in aerodynamic moments and transient wheel-rail impacts.Maximum pitching and yawing moments on the head vehicle in the two methods differ by 21.1 kN∙m and 29.6 kN∙m,respectively.And wheel-rail impacts caused by sudden changes in aerodynamic loads are significantly severer in CS.Wheel-rail safety indices obtained by CS are slightly greater than those by OS.This research proposes a CS method for aerodynamic characteristics and dynamic performance of the HST in complex scenarios,which has superiority in computational efficiency and stability.
基金The National Key Research and Development Pro-gram of China(No.2022YFC3801201)the National Natural Science Foundation of China(No.51921006,52478505)+1 种基金the Natural Science Foundation of Guangdong Province(No.2022A1515010403)Shenzhen Collaborative Innovation Project(No.CJGJZD20220517142401002).
文摘A novel bidirectional tuned rolling mass damper(Bi-TRMD)device is proposed,and its dynamic character-istics and vibration reduction performance are investigated.The device achieves the performance goal of bidirectional vibration reduction for a tuned rolling mass damper with a single concave structure.First,the Bi-TRMD device is introduced,and its three-dimensional(3D)mechanical model is established.The motion equations of the model are de-rived using the Gibbs-Appell equation,and a trajectory pre-diction method for the sphere and structure within the model is developed.This method demonstrates that the rolling motion of the sphere around orthogonal axes is nearly indepen-dent within a limited range,enabling the simplification of the 3D model into a two-dimensional(2D)model.The accuracy of this simplification is validated through case analysis.The vibration reduction parameters are optimized using the 2D model and Den Hartog theory,leading to the derivation of mathematical expressions for the optimal frequency ratio and damping ratio.Subsequently,the bidirectional vi-bration reduction performance of the Bi-TRMD is analyzed.The results show that under white noise excitation,the Bi-TRMD achieves a bidirectional peak acceleration reduction rate that is 9.92%and 7.79%higher than that of translational tuned mass dampers(TMD)with the same mass.These findings demonstrate that the proposed Bi-TRMD ef-fectively achieves two-directional vibration reduction with a single concave structure,offering superior vibration reduction performance.
基金National Natural Science Foundation of China under Grant No.52278340Natural Science Foundation of Hebei Province under Grant No.E2023202028。
文摘In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic triaxial tester.A scanning electron microscope(SEM)was employed to assess the soil samples after dynamic testing.The results indicate that the dynamic characteristics of lacustrine soft clay were significantly affected by confining pressure and water content.A quantitative relationship was established among confining pressures,water content,and the dynamic shear modulus ratio.The dynamic characteristic parameters of undisturbed,remolded and saturated soil are obviously different,and the original structure can enhance the shear strength of soil.By comparing the results with those from other studies,we found that the dynamic characters of soft clays were considerably varied in different regions,and lacustrine soft clays had a larger dynamic shear modulus ratio and a smaller damping ratio when the dynamic shear strain was large.Using IPP software to process the microstructural images,we found that the soil was dominated by small pores and medium particles,and the roundness of pores and particles had an apparently positive correlation with the maximum diameter.Moreover,the pores and particles of the soil showed fractal characteristics and directionality,and the fractal dimensions and probability entropy were strongly correlated with the macrostructural parameters.Finally,we developed a prediction model for macrostructural and microstructural parameters.
基金National Natural Science Foundation of China,Grant/Award Numbers:12072363,12372373,51934007,52104234,52174091。
文摘The coal dynamic characteristic stress identification under dynamic load is important for guiding underground mineral mining and predicting underground dynamic disasters.In this article,the dynamic compression test of anthracite under five strain rates is carried out,the evolution law of three kinds of crack characteristic stress is analyzed,and a prediction model of the crack characteristic stress threshold considering the strain rate effect is established.Then,the rationality of crack characteristic stress under dynamic loading is discussed from the damage evolution standpoint,and the crack extension response mechanism during dynamic compression of anthracite is discussed.The result shows that the crack characteristic stress threshold is significantly influenced by the strain rate.The three characteristic stress thresholds are positively correlated with the strain rate,but the ratios to the crest stress gradually decrease.The increase in the strain rate strongly contributes to the crack extension behavior of anthracite.In the crack unstable extension phase,because of the increase of the strain rate,anthracite shows more energy dissipation under the same deformation in association with the stress concentration effect and the dynamic strength enhancement effect.The crack propagation rate is increased,the crack propagation path of the section is more complex,and more severe damage occurs before the dynamic failure of anthracite,which leads to even more severe damage.
基金supported by the Natural Science Foundation of Jiangsu Province,China(Grant No.BK20241443)the Jiangsu Funding Program for Excellent Postdoctoral Talent(Grant No.2024ZB072)the National Natural Science Foundation of China(Grant No.92266201).
文摘This study aims to establish an integrated sensitivity analysis framework for optimization and design of the dynamic performance of mechanical systems such as tracked vehicles,by combining the direct differentiation method(DDM)with the linear multibody system transfer matrix method(linear MSTMM).The rigid-flexible coupled multibody system dynamics model of a tracked vehicle is established using the linear MSTMM and validated through the modal test.Building upon the existing DDM-based eigenvalue sensitivity analysis method within the linear MSTMM,the DDM is embedded into it to enable programmable and efficient computation of dynamic response sensitivities for mechanical systems.The proposed approach is used to quantitatively evaluate the sensitivities of both natural vibration characteristics(e.g.,natural frequencies and mode shapes)and transient dynamic responses of the tracked vehicle with respect to system parameters,successfully identifying critical structural parameters.Compared to conventional finite difference methods,the developed methodology eliminates sensitivity to perturbation step sizes.The contributions of this work lie in establishing a unified theoretical foundation and analysis framework for guiding dynamics optimization and design of mechanical systems,and extending the applicability of the linear MSTMM to sensitivity analysis of transient dynamic responses.
基金support from the National Key R&D Program of China(Grant Nos.2023YFB3709900 and 2023YFB3709903)the National Natural Science Foundation of China(Grant Nos.52174293 and U22A20171)+1 种基金the High Steel Center(HSC)at North China University of TechnologyUniversity of Science and Technology Beijing(USTB).
文摘MgO has been shown to facilitate the precipitation of MgO-rich crystalline phases within the MgO-CaO-Al_(2)O_(3)-SiO_(2)(MCAS)glassy inclusion system,which possesses a high liquidus temperature and a significant Young’s modulus.The underlying linkage between the structural evolution and the crystallization characteristics of the MCAS system was systematically investigated using molecular dynamics simulation and thermodynamic calculation.The results revealed that Mg^(2+) ions played a dual role,constructing networks through the formation of tricluster oxygens while consuming bridging oxygens(BOs)in a mechanism similar to Ca^(2+) ions.However,despite this dual role,the network connectivity was still decreased with the increase in MgO/(MgO+Al_(2)O_(3))(M/(M+A))and CaO/(CaO+SiO_(2))(C/(C+S))ratios,primarily due to the reduction in BOs.This microscopic structural evolution resulted in a reduction in viscosity and an enhancement of crystallization ability.Furthermore,the remarkable diffusion capability of Mg^(2+) ions,coupled with the increased proportion of 6-coordinated Mg^(2+)ions,unveiled the mechanism underlying the precipitation of MgSiO_(3) and Mg_(2)SiO_(4) crystals,which exhibited high Young’s moduli of 165.23 and 196.67 GPa,respectively.To prevent the precipitation of MgO-rich crystalline phases,it was crucial to maintain the M/(M+A)ratio below 0.42 and the C/(C+S)ratio below 0.16 within the MCAS system.
基金Project supported by the National Natural Science Foundation of China (No.51075341)the National Basic Research Program (973) of China (No.2011CB711105)
文摘In this paper,a modeling method for a pantograph-catenary system is put forward to investigate the dynamic contact behavior in space,taking into consideration of the appearance characteristics of the contact surfaces of the pantograph and catenary.The dynamic performance of the pantograph-catenary system,including contact forces,accelerations,and the corresponding spectra,is analyzed.Furthermore,with the modeling method,the influences of contact wire irregularity and the vibration caused by the front pantograph on the rear pantograph for a pantograph-catenary system with double pantographs are investigated.The results show that the appearance characteristics of the contact surfaces play an important role in the dynamic contact behavior.The appearance characteristics should be considered to reasonably evaluate the dynamic performance of the pantograph-catenary system.
基金the National Natural Science Foundation of China(No.52005441)Young Elite Scientist Sponsorship Program by CAST(No.2022QNRC001)+3 种基金Natural Science Foundation of Zhejiang Province(No.LQ21E050017)“Pioneer”and“Leading Goose”R&D Program of Zhejiang Province(Nos.2022C01122 and 2022C01132)Postdoctoral Science Foundation(Nos.2021M692777 and 2021T140594)State Key Laboratory of Mechanical System and Vibration(No.MSV202316).
文摘High speed on/off valve(HSV)is an essential component in aerospace digital hydraulic systems(ADHS).Dynamic performance and temperature rising characteristic are two important features,which determine the performance of HSV,and affect the response speed and reliability of ADHS.Increasing the driving voltage is an effective method for improving the dynamic performance of HSV.However,continuous high voltage excitation will lead to more wasted energy,higher temperature rising and lower reliability.To solve this problem,a pre-excitation control algorithm(PECA)is proposed in this paper based on the theoretical model of the influence of electrical parameters on dynamic performance and temperature rising characteristics.In PECA,an appropriate initial coil current is generated by pre-excitation instead of increasing driving voltage,which significantly shortens the switching delay time.Then,based on real-time current online calculation and feedback mechanism,the adaptive switching of five equivalent voltages is realized.Consequently,the coil current can be rapidly kept at the expected state without consuming more energy and generating more heat.Results indicate that compared with conventional PWM control algorithm,the PECA can improve dynamic performance of HSV,shorten the total switching time by 71.5%,and increase the maximum operation frequency.Therefore,the linear area of flow characteristic is expended by 80.0%,the adjusting time of HSV-controlled system is reduced by 23%,while shortening steady error by 46.7%.Moreover,the temperature rising characteristics of HSV are better,the maximum operation temperature is reduced by 68.6%,and the time to reach the steady state temperature is shortened by 20%.From the results,it can be concluded that the PECA is not only an effective and practical control algorithm for improving the performance of HSVs and HSV-controlled systems while reducing the heat generation and decreasing the temperature rising of HSV,but also can be a potential solution in ADHS.
文摘Experimental investigation on the aerodynamic performance and aeroacoustic characteristics of model rotors with different tip anhedral angles in hover are conducted in the paper.Three sets of model rotors with blade-tip anhedral angle 0°(reference rotor),20°and 45°respectively are designed to analyze the influence of the anhedral angle on the hovering performance and aeroacoustics of rotor.In the environment of anechoic chamber,the hover experiments under the different collective pitch and blade numbers,are carried out to measure the figure of merit(FM),time history of sound pressure and sound pressure level(SPL)of the three rotor models.Based on test results,the comparison and analysis of hovering performance and aeroacoustic characteristics among the three rotor models have been done.Meanwhile,for the sake of analysis,the rotor wake and blade pressure distribution are simulated by means of computational fluid method(CFD).At last,some conclusions about the effects of blade-tip anhedral angle on the aerodynamic performance and aeroacoustic characteristics in hover are obtained.An anhedral blade tip can enhance the FM of the rotor,and decrease the rotor loads noise to some extent.
文摘This study aimed to investigate the effect of fatigue characteristics on the static and dynamic performance of Eucommia ulmoides gum isolators, and to explore the performance changes of Eucommia ulmoides gum isolators with different formulations. For this purpose, we used five formulations of Eucommia ulmoides gum isolators and set different fatigue test methods to study the static and dynamic performance changes of Eucommia ulmoides gum isolators with different formulations by changing the amplitude. The experimental results showed that the addition of Eucommia ulmoides gum had an impact on the performance of the isolator, and the number of fatigue cycles would lead to the hardening of the Eucommia ulmoides gum isolator and changes in its static and dynamic performance. In the range of two million vibrations, the performance change of the isolator was significant in the early stage and then tended to be flat, indicating that the impact of fatigue on the performance of the isolator would not continue to persist. It is worth noting that the study found that the addition of 30% Eucommia ulmoides gum had the least impact on the performance of the isolator under fatigue. Therefore, for long-term use of Eucommia ulmoides gum isolators, attention should be paid to their fatigue characteristics to ensure their stability and reliability. Additionally, this study provides a reference for the design and application of Eucommia ulmoides gum isolators. In summary, this study provides important reference value for a deeper understanding of the fatigue characteristics of Eucommia ulmoides gum isolators and for ensuring their stable and reliable performance. .
基金supported by the Postgraduate Education Reform and Quality Improvement Project of Henan Province,China(Grant No.YJS2023AL004)the Graduate Innovation Project of North China University of Water Resources and Electric Power(Grant No.NCWUYC-202315069)the China National Scholarship Fund organized by the China Scholarship Council(Grant No.202208410337).
文摘The deformation characteristics of silty soils under vibrational loads can easily change due to the wetting process,leading to the failure of roadbed structures.Commonly used methods for improving silty soils in engineering often yield unsatisfactory economic and ecological outcomes.As an environment-friendly soil improvement material,Xanthan gum has broad application prospects and is therefore considered a solidifying agent for enhancing silty soil properties in the Yellow River Basin.In this study,a series of tests is conducted using a scanning electron microscope and a dynamic triaxial testing apparatus to investigate the microstructure and dynamic deformation characteristics of unsaturated silty soil with varying xanthan gum contents during the wetting process.The results show that xanthan gum effectively fills voids between soil particles and adheres to their surfaces,forming fibrous and network structures.This modification enhances the inherent properties of the silty soil and significantly improves its stability under dynamic loading.Specifically,with increasing xanthan gum content,the dynamic shear modulus increases while the damping ratio decreases.During the wetting process,as suction decreases,the dynamic shear modulus decreases while the damping ratio increases.Xanthan gum reduces the sensitivity of the dynamic deformation characteristics of the treated silty soil to changes in suction levels.Finally,based on the modified Hardin-Drnevich hyperbolic model,a predictive model for the dynamic shear modulus and damping ratio of treated silty soil is proposed,considering the xanthan gum content.These research findings provide a theoretical basis for the construction and maintenance of water conservancy,slope stabilization,and roadbed projects in the Yellow River Basin.
基金supported in part by the National Natural Science Foundation of China(62125306)Zhejiang Key Research and Development Project(2024C01163)the State Key Laboratory of Industrial Control Technology,China(ICT2024A06)
文摘In recent decades,control performance monitoring(CPM)has experienced remarkable progress in research and industrial applications.While CPM research has been investigated using various benchmarks,the historical data benchmark(HIS)has garnered the most attention due to its practicality and effectiveness.However,existing CPM reviews usually focus on the theoretical benchmark,and there is a lack of an in-depth review that thoroughly explores HIS-based methods.In this article,a comprehensive overview of HIS-based CPM is provided.First,we provide a novel static-dynamic perspective on data-level manifestations of control performance underlying typical controller capacities including regulation and servo:static and dynamic properties.The static property portrays time-independent variability in system output,and the dynamic property describes temporal behavior driven by closed-loop feedback.Accordingly,existing HIS-based CPM approaches and their intrinsic motivations are classified and analyzed from these two perspectives.Specifically,two mainstream solutions for CPM methods are summarized,including static analysis and dynamic analysis,which match data-driven techniques with actual controlling behavior.Furthermore,this paper also points out various opportunities and challenges faced in CPM for modern industry and provides promising directions in the context of artificial intelligence for inspiring future research.
基金funded by the Science and Technology Project of Tianjin(No.24YDTPJC00680)the National Natural Science Foundation of China(No.52406191).
文摘The growth of computing power in data centers(DCs)leads to an increase in energy consumption and noise pollution of air cooling systems.Chip-level cooling with high-efficiency coolant is one of the promising methods to address the cooling challenge for high-power devices in DCs.Hybrid nanofluid(HNF)has the advantages of high thermal conductivity and good rheological properties.This study summarizes the numerical investigations of HNFs in mini/micro heat sinks,including the numerical methods,hydrothermal characteristics,and enhanced heat transfer technologies.The innovations of this paper include:(1)the characteristics,applicable conditions,and scenarios of each theoretical method and numerical method are clarified;(2)the molecular dynamics(MD)simulation can reveal the synergy effect,micro motion,and agglomeration morphology of different nanoparticles.Machine learning(ML)presents a feasiblemethod for parameter prediction,which provides the opportunity for the intelligent regulation of the thermal performance of HNFs;(3)the HNFs flowboiling and the synergy of passive and active technologies may further improve the overall efficiency of liquid cooling systems in DCs.This review provides valuable insights and references for exploring the multi-phase flow and heat transport mechanisms of HNFs,and promoting the practical application of HNFs in chip-level liquid cooling in DCs.
基金National Natural Science Foundation of China(12002045)Supported by State Key Laboratory of Explosion Science and Safety Protection,Beijing Institute of Technology(QNKT22-09)。
文摘A high-density tungsten-zirconium-titanium(W-Zr-Ti)reactive alloy was prepared by powder metallurgy.This alloy exhibits high density,high strength,and violent energy release characteristics,resulting in outstanding penetration and ignition abilities.Dynamic impact experiment demonstrated its strain rate hardening effect,and the energetic characteristics were investigated by digital image processing technique and thermal analysis experiment.The results show that W-Zr-Ti reactive alloy performs compressive strength of 2.25 GPa at 5784 s^(-1)strain rate,and its exothermic reaction occurs at about 961 K.Based on the explosion test and shock wave theory,thresholds of enhanced damage effect are less than 35.77 GPa and 5.18×10^(4)kJ/m^(2)for shock pressure and energy,respectively.Furthermore,the transformation of fracture behavior and failure mechanism is revealed,which causes the increase in compressive strength and reaction intensity under dynamic loading.
基金National Natural Science Foundation of China(No.52388102)New Cornerstone Science Foundation through the Xplorer Prize.
文摘The dynamic performance of high-speed trains is significantly influenced by sudden changes in aerodynamic loads(ADLs)when exiting a tunnel in a windy environment.Focusing on a double-track tunnel under construction in a mountain railway,we established an aerodynamic model involving a train exiting the tunnel,and verified it in the Fluent environment.Overset mesh technology was adopted to characterize the train’s movement.The flow field involving the train,tunnel,and crosswinds was simulated using the Reynolds-averaged turbulence model.Then,we built a comprehensive train-track coupled dynamic model considering the influences of ADLs,to investigate the vehicles’dynamic responses.The aerodynamics and dynamic behaviors of the train when affected by crosswinds with different velocities and directions are analyzed and discussed.The results show that the near-wall side crosswind leads to sharper variations in ADLs than the far-wall side crosswind.The leading vehicle suffers from more severe ADLs than other vehicles,which worsens the wheel-rail interaction and causes low-frequency vibration of the car body.When the crosswind velocity exceeds 20 m/s,significant wheel-rail impacts occur,and the running safety of the train worsens rapidly.
基金Basic Science Research Program of the National Research Foundation of Korea under Grant Nos.NRF-2020R1A6A1A03044977 and NRF2022R1A2C2004351。
文摘In this study, shaking table tests were performed to investigate the dynamic characteristics of a mold transformer. Based on the test results, rotary friction dampers were developed to mitigate the excessive lateral displacement that occurred along the direction of the weak stiffness axis of the mold transformer. In addition, shaking table tests were performed by attaching friction dampers to both sides of the mold transformer. Based on the shaking table test results, the natural frequency, mode vector, and damping ratio of the mold transformer were derived using the transfer function and half-power bandwidth. The test results indicated that the use of friction dampers can decrease the displacement and acceleration response of the mold transformer. Finally, dynamic structural models were established considering the component connectivity and mass distribution of the mold transformer. In addition, a numerical strategy was proposed to calibrate the stiffness coefficients of the mold transformer, thereby facilitating the relationship between generalized mass and stiffness. The results indicated that the analytical model based on the calibration strategy of stiffness coefficients can reasonably simulate the dynamic behavior of the mold transformer using friction dampers with regard to transfer function, displacement, and acceleration response.
基金supported by the National Natural Science Foundation of China(grant number 12302048,received by author Yan Xu)Yunnan fundamental research projects(grant No.202501AT070321,received by author Yan Xu).
文摘The emissions from traditional fossil heavy-duty trucks have become a conspicuous issue worldwide.The electrical road system(ERS)can offer a viable solution for achieving zero CO_(2) emissions and has high energy efficiency in long-distance road cargo transport.While many kinds of pantograph structures have been developed for the ERS,their corresponding pantograph-catenary dynamic characteristics under different road conditions have not been investigated.This work performs a numerical study on the dynamics of the pantograph-catenary interaction of an ERS considering different pantograph structures.First,a pantograph-catenary-truck-road model is proposed.The reduced catenary model and reduced-plate model transmission method are used to minimize model scale.Three different types of ERS pantograph structures are considered in the model.After validation,the pantograph-catenary dynamics under the influence of truck-road interactions with complex road roughness and different pantographs are studied and compared.The corresponding vibration transmission mechanism is further focused.The results show that the truck-road interaction has a significant effect on the pantograph-catenary interaction,but the pantograph with only one lower and upper armcan isolate the roll vibrationmotion transmission fromthe truck to the collector head,which has the best dynamic performance and is suggested for use in the ERS.
基金Funded by the National Natural Science Foundation of China(Nos.52174088,42277154)the Independent Innovation Research Fund Graduate Free Exploration Project for the Wuhan University of Technology(No.104972024JYS0007)。
文摘The influence of FT(freeze-thaw)cycles and average strain rate on the dynamic impact performance,energy evolution characteristics,and failure behavior of sandstone was studied through dynamic impact tests.Results displayed that the FT damage process of samples can be divided into three stages based on the changes in weight,porosity,and P-wave velocity.The dynamic peak strength,dynamic elastic modulus,and strength ratio decreased with increasing FT cycles,and increased with increasing average strain rate.Moreover,the average strain rate reduced the influence of FT cycles on dynamic peak strength.In general,the incident energy,reflected energy and dissipated energy increased with increasing average strain rate,the transmitted energy was negligibly affected by the average strain rate,and the energy dissipation ratio decreased with increasing average strain rate.In addition,the influence of FT cycles on each type of energy and energy dissipation ratio during sample failure was smaller than that of average strain rate.The average size of fragments can accurately demonstrate the impact of FT damage and average strain rate on dynamic peak strength and failure mode,and quantitatively evaluate the sample’s fragmentation degree.Fractal dimension varies with FT cycles and average strain rate,and the threshold is between 148.30 and 242.57 s^(-1).If the average strain rate is in the threshold range,the relationship between the fractal dimension and dynamic peak strength is more regular,otherwise,it will become complicated.The results reveal the dynamic failure mechanism of white sandstone samples,providing assistance for dynamic rock-breaking and disaster prevention in cold regions.
基金The Youth Foundation Project of Jiangsu Province(No.BK20230337)the Natural Science Research of Jiangsu Higher Education Institutions of China(No.22KJB560004)the National Natu-ral Science Foundation of China(No.52278523)。
文摘Transmission towers,serving as the support structure of transmission lines,are significant for the functional-ity of an electric transmission system.Bolt joint loosening is one of the critical factors that can affect the safety and stability of transmission towers.In this study,the effects of bolt joint loosening on the dynamic characteristics of a 220-kV angle steel transmission tower are the main topic of concern.First,the mechanical properties of typical joints subjected to different degrees of bolt loosening are studied by finite solid-element simulation,based on which a finite hybrid-element modeling method is developed for a tower structure suffering varying loose degrees in the joints.Taking a 220-kV angle steel transmission tower as the object,the influence of the position and degree of loosening on the tower’s natural frequencies and mode shapes are simulated and discussed.The results demonstrate that the main-member splice joint and the main diagonal-horizontal member gusset plate joint account for the dominant impact on the dynamic characteristics of the tower.In addition,the dominant joint shifts from the main-member splice joint to the main diagonal-horizontal member gusset plate joint as the considered modal order increases.In the case of double joints loosening simultaneously,the loosening of nondomi-nant joints has nonnegligible effects on the tower as well.
基金supported by the Fundamental Research Funds for the Central Universities,China(No.JKF-2025009442288)the Excellent Youth Team Cultivation Project for Central Universities of the Ministry of Education,China(No.YWF-22/23/24-JT-106)。
文摘The Propellant Feed System(PFS)is a crucial component of Electric Propulsion System(EPS)which is widely used in satellites for its high reliability and specific impulse.The Switching and Proportional Hybrid-controlled Xenon Feed System(SPHXFS)is a novel type of PFS with high flow regulation precision.This study develops a system-level simulation model with 75 components for the SPHXFS.The accuracy of the model is validated through the comparison with test data,showing an error of less than 3%during the startup phase and less than 0.1%after stabilization.The study analyzes the startup process and finds that the two-stage pressure reduction system avoids two-phase flow interference downstream,achieving a regulation accuracy of±0.1%.A long-term operation simulation of the system is conducted,revealing that pressure fluctuations occur upstream at 4767 s due to Bang-Bang control.However,with proportional control adjustments,these fluctuations do not affect the flow supply.Further research examines the impact of synchronous and asynchronous control modes of the Bang-Bang Valve(TPBBV)under the tank pressures of 6-10 MPa on the system's dynamic characteristics.It is found that the asynchronous control scheme results in a flow supply settling time that is 7.2-10s longer than the synchronous control scheme,with an overshoot increase of 4.1%-4.9%.These insights provide valuable reference and guidance for system optimization design and the formulation of operational strategies.
