The high-speed winding spindle employs a flexible support system incorporating rubber O-rings.By precisely configuring the structural parameters and the number of the O-rings,the spindle can stably surpass its critica...The high-speed winding spindle employs a flexible support system incorporating rubber O-rings.By precisely configuring the structural parameters and the number of the O-rings,the spindle can stably surpass its critical speed points and maintain operational stability across the entire working speed range.However,the support stiffness and damping of rubber O-rings exhibit significant nonlinear frequency dependence.Conventional experimental methods for deriving equivalent stiffness and damping,based on the principle of the forced non-resonance method,require fabricating custom setups for each O-ring specification and conducting vibration tests at varying frequencies,resulting in low efficiency and high costs.This study proposes a hybrid simulation-experimental method for dynamic parameter identification.Firstly,the frequency-dependent dynamic parameters of a specific O-ring support system are experimentally obtained.Subsequently,a corresponding parametric finite element model is established to simulate and solve the equivalent elastic modulus and equivalent stiffness-damping coefficient of this O-ring support system.Ultimately,after iterative simulation,the simulated and experimental results achieve a 99.7%agreement.The parametric finite element model developed herein can directly simulate and inversely estimate frequency-dependent dynamic parameters for O-rings of different specifications but identical elastic modulus.展开更多
An improved dynamic parameter model is presented based on cellular automata.The dynamic parameters,including direction parameter,empty parameter,and cognition parameter,are formulated to simplify tactically the proces...An improved dynamic parameter model is presented based on cellular automata.The dynamic parameters,including direction parameter,empty parameter,and cognition parameter,are formulated to simplify tactically the process of making decisions for pedestrians.The improved model reflects the judgement of pedestrians on surrounding conditions and the action of choosing or decision.According to the two-dimensional cellular automaton Moore neighborhood we establish the pedestrian moving rule,and carry out corresponding simulations of pedestrian evacuation.The improved model considers the impact of pedestrian density near exits on the evacuation process.Simulated and experimental results demonstrate that the improvement makes sense due to the fact that except for the spatial distance to exits,people also choose an exit according to the pedestrian density around exits.The impact factors 伪,尾,and 纬 are introduced to describe transition payoff,and their optimal values are determined through simulation.Moreover,the effects of pedestrian distribution,pedestrian density,and the width of exits on the evacuation time are discussed.The optimal exit layout,i.e.,the optimal position and width,is offered.The comparison between the simulated results obtained with the improved model and that from a previous model and experiments indicates that the improved model can reproduce experimental results well.Thus,it has great significance for further study,and important instructional meaning for pedestrian evacuation so as to reduce the number of casualties.展开更多
Based on Matsuoka＇s central pattern generator （CPG） model and taking quadruped as an example, the dynamics of CPG model was investigated through the single-parameter-analysis method and the numerical simulation tec...Based on Matsuoka＇s central pattern generator （CPG） model and taking quadruped as an example, the dynamics of CPG model was investigated through the single-parameter-analysis method and the numerical simulation technique. Simulation results indicate that the CPG model exhibits complex dynamics, while each parameter has specifically definitive influence trends on the CPG output. These conclusions were applied to control a quadrupedal robot to walk in different gaits, clear obstacle, and walk up- and down-slope successfully.展开更多
Dynamic optimization problems(DOPs) described by differential equations are often encountered in chemical engineering. Deterministic techniques based on mathematic programming become invalid when the models are non-di...Dynamic optimization problems(DOPs) described by differential equations are often encountered in chemical engineering. Deterministic techniques based on mathematic programming become invalid when the models are non-differentiable or explicit mathematical descriptions do not exist. Recently, evolutionary algorithms are gaining popularity for DOPs as they can be used as robust alternatives when the deterministic techniques are invalid. In this article, a technology named ranking-based mutation operator(RMO) is presented to enhance the previous differential evolution(DE) algorithms to solve DOPs using control vector parameterization. In the RMO, better individuals have higher probabilities to produce offspring, which is helpful for the performance enhancement of DE algorithms. Three DE-RMO algorithms are designed by incorporating the RMO. The three DE-RMO algorithms and their three original DE algorithms are applied to solve four constrained DOPs from the literature. Our simulation results indicate that DE-RMO algorithms exhibit better performance than previous non-ranking DE algorithms and other four evolutionary algorithms.展开更多
The dynamic parameter identification of the robot is the basis for the design of the controller based on the dynamic model.Currently,the primary method for solving angular velocity and angular acceleration is to filte...The dynamic parameter identification of the robot is the basis for the design of the controller based on the dynamic model.Currently,the primary method for solving angular velocity and angular acceleration is to filter and smooth the position sequence and then form a differential signal.However,if the noise and the original signal overlap in the frequency domain,filtering the noise will also filter out the valuable information in the frequency band.This paper proposes an excitation trajectory based on Logistic function,which fully uses the information in the original signal and can accurately solve the angular velocity and angular acceleration without filtering and smoothing the position sequence.The joint angle of the excitation trajectory is mapped to the joint angular velocity and angular acceleration one by one so that the joint angular velocity and joint angular acceleration can be obtained directly according to the position.The genetic algorithm is used to optimize the excitation trajectory parameters to minimize the observation matrix’s condition number and further improve the identification accuracy.By using the strategy of iterative identification,the dynamic parameters identified in each iteration are substituted into the robot controller according to the previous position sequence until the tracking trajectory approaches the desired trajectory,and the actual joint angular velocity and angular acceleration converge to the expected value.The simulation results show that using the step-by-step strategy,the joint angular velocity and joint angular acceleration of the tracking trajectory quickly converge to the expected value,and the identification error of inertia parameters is less than 0.01 in three iterations.With the increase of the number of iterations,the identification error of inertial parameters can be further reduced.展开更多
Based on the Monte Carlo method,we examined the dynamic magnetic behaviors and magnetocaloric effect of a Kagome lattice subjected to the influence of time-dependent oscillating and time-independent magnetic fields.We...Based on the Monte Carlo method,we examined the dynamic magnetic behaviors and magnetocaloric effect of a Kagome lattice subjected to the influence of time-dependent oscillating and time-independent magnetic fields.We used the Ising model to describe the Kagome lattice and study the dynamic order parameters,blocking temperature,internal energy,and phase diagrams.The results revealed that exchange coupling increases the stability of the system and the bias field induces order;however,the time-dependent oscillating magnetic field induces disorder.In addition,the magnetocaloric properties,changes in magnetic entropy,and relative cooling power of the Kagome lattice were investigated.展开更多
Dynamic magnetic properties of the mixed-spin(3/2,5/2)Ising graphene-like monolayer in an oscillating magnetic field are studied by means of Monte Carlo simulation.The effects of Hamiltonian parameters such as crystal...Dynamic magnetic properties of the mixed-spin(3/2,5/2)Ising graphene-like monolayer in an oscillating magnetic field are studied by means of Monte Carlo simulation.The effects of Hamiltonian parameters such as crystal field and time-dependent oscillating magnetic field on the dynamic order parameter,susceptibility and internal energy of the system are well presented and explained.Moreover,much attention has also been dedicated to the phase diagrams with different parameters in order to better comprehend the impacts of these parameters on the critical temperature.Our results reveal that the crystal fields of two sublattices have similar effects on the critical temperature,but the bias field and amplitude of oscillating field have opposite effects on it.We hope that our research can be of guiding significance to the theoretical and experimental studies of graphene-like monolayer.展开更多
In wireless networks, packet access is a popular mode, and the key problem is how to improve throughput and access delay performance, especially the throughput for wireless channels. These results will be a reference ...In wireless networks, packet access is a popular mode, and the key problem is how to improve throughput and access delay performance, especially the throughput for wireless channels. These results will be a reference for not only a wireless channel but also a common MAC protocol.展开更多
Many Internet-GIS have been implemented on the web and they are increasingly becoming an important part of multimedia cartography that has much more users as compared to traditional GIS production media.Internet GIS t...Many Internet-GIS have been implemented on the web and they are increasingly becoming an important part of multimedia cartography that has much more users as compared to traditional GIS production media.Internet GIS technology has provided the GIS dynamic information acquisition with technical support.Also,the visualization technology of electronic map has provided tools for GIS symbols with dynamic characteristics.On the basis of GIS dynamic information acquisition,the design idea and implementation methods of dynamic symbols in dynamic GIS are presented in this article.展开更多
The Tianjin coastal area is a typical soft soil region,where the soil is a marine deposit of the late Quaternary.The soil dynamic parameters from seismic risk assessment reports are collected,and drilling of 15 holes ...The Tianjin coastal area is a typical soft soil region,where the soil is a marine deposit of the late Quaternary.The soil dynamic parameters from seismic risk assessment reports are collected,and drilling of 15 holes was carried out to sample the soils and measure their dynamic characteristics.The data was divided into 7 types based on lithology,namely,muddy clay,muddy silty clay,silt,silty clay,clay,silty sand and fine sand.Statistics of the dynamic parameters of these soils are collected to obtain the mean values of dynamic shear modulus ratio and damping ratio at different depths.Then,two typical drill holes are selected to establish the soil dynamic models to investigate the seismic response in different cases.The dynamic seismic responses of soil are calculated using the statistical values of this paper,and the values of Code(1994) and those recommended by Yuan Xiaoming et al.(2000),respectively.The applicability and pertinence of the statistical value obtained in this paper are demonstrated by the response spectrum shape,peak ground acceleration and response spectral characteristics.The results can be taken as a reference of the soil dynamic value in this area and can be used in the seismic risk assessment of engineering projects.展开更多
In this paper, we study the initial-boundary value problem with rigid wall for the equations in combustion dynamics with largy parameter. Introducing variable scalar norms and two seminorms, making use of the vorticit...In this paper, we study the initial-boundary value problem with rigid wall for the equations in combustion dynamics with largy parameter. Introducing variable scalar norms and two seminorms, making use of the vorticity operator, overcome the difficulty from the large parameter. By energy estimation, the existence and unique theorems of local smooth solution is proved.展开更多
In this paper, dynamic soil parameters derived from Dalian area seismic risk assessment reports are collected. In this study, the measurement data is divided into 7 types, i.e. silty clay, muddy silty clay, clay, medi...In this paper, dynamic soil parameters derived from Dalian area seismic risk assessment reports are collected. In this study, the measurement data is divided into 7 types, i.e. silty clay, muddy silty clay, clay, medium sand, rock fragments, backfill soil and fully-weathered slate. Statistics of the dynamic parameters of these soils are carried out to obtain the mean values of dynamic shear modulus ratio and damping ratio. Typical drill holes are selected to establish dynamic soil models to investigate the seismic response for various cases. The dynamic parameters of the models are taken from the statistical values of this study, the standard values of code 94 (i.e. the dynamic soil parameters for Dalian seismic microzonation), and the recommended values by Yuan Xiaoming et al. (2000) respectively. The calculated results of peak ground acceleration are compared with the response spectral characteristics. The results show that the statistical values are approximate to the values recommended by Yuan Xiaoming, et al. (2000), but different greatly with the standard values in code 94.展开更多
By using the technique of the split Hopkinson pressure bar（ SHPB）,impact tests at different stress wavelengths（ 0. 8-2. 0 m） and strain rates（ 20-120 s^（-1）） were conducted to study the dynamic mechanical prop...By using the technique of the split Hopkinson pressure bar（ SHPB）,impact tests at different stress wavelengths（ 0. 8-2. 0 m） and strain rates（ 20-120 s^（-1）） were conducted to study the dynamic mechanical properties and damage accumulation evolution lawof granite. Test results showthat the dynamic compressive strength and strain rate of granite have a significantly exponential correlation;the relationship between peak strain and strain rate is approximately linear,and the increase of wavelengths generally makes the level of peak strain uplift. The multiple-impacts test at a lowstrain rate indicates that at the same wavelength,the cumulative damage of granite shows an exponential increasing form with the increase of strain rate; when keeping the increase of strain rate constant and increasing the stress wavelength,the damage accumulation effect of granite is intensified and still shows an exponential increasing form; under the effect of multiple impacts,the damage development trend of granite is similar overall,but the increase rate is accelerating. Therefore the damage evolution model was established on the basis of the exponential function while the physical meaning of parameters in the model was determined. The model can reflect the effect of the wave parameters and multiple impacts. The validity of the model and the physical meaning of the parameters were verified by the test,which further offer a reference for correlational research and engineering application for the granite.展开更多
Source spectra,corner frequency and zero frequency amplitudes in near-source conditions were measured using waveform data from 989 earthquakes with magnitudes larger than ML2.0 observed by the Beijing Digital Telemetr...Source spectra,corner frequency and zero frequency amplitudes in near-source conditions were measured using waveform data from 989 earthquakes with magnitudes larger than ML2.0 observed by the Beijing Digital Telemetry Seismic Network in the Capital Circle Region of China and its surrounding areas from January 2002 to June 2006 by the Brune model.Relevant formulas that were used for the calculation of dynamic source parameters include rupture radius,seismic moment,seismic energy,stress drop,and apparent stress.Scaling relations and characteristics of temporal-spatial variations of these dynamic parameters before the MS5.1 Wenan earthquake in Hebei Province that occurred on July 20,2006 were analyzed.Results show that apparent stress,stress drop,and the ratio of seismic energy to the rupture radius had relatively high values in some areas before the Wenan earthquake.These high-value concentration areas were mainly distributed in the North China Plain seismic zone.As is seen from the time curves,parameters,such as apparent stress,stress drop,and ratio of seismic energy to rupture radius underwent significant ascending processes before the Wenan earthquake,but the variation in the corner frequency showed a descending trend.This result might be related to the enhancement of stress in the North China Plain seismic zone before the earthquake.展开更多
The investigation of leachate-contaminated clay(LCC)is essential for landfill engineering assessment and achievement of sustainable development goals.Several static and dynamic laboratory tests,including unconfined co...The investigation of leachate-contaminated clay(LCC)is essential for landfill engineering assessment and achievement of sustainable development goals.Several static and dynamic laboratory tests,including unconfined compressive strength(UCS),California bearing ratio(CBR),and cyclic simple shear,are conducted.Cyclic simple shear experiments on LCCs were performed to evaluate the damping and shear modulus.The investigated factors are vertical load(VL),leachate content(LC),frequency(F),and shear strain(ShS)for LCC.Forensic-based investigation optimization(FBIO)and equilibrium optimizer algorithm(EOA)were utilized in addition to multiple types of ensemble models,including adaptive boosting(ADB),gradient boosting regression tree(GBRT),extreme gradient boosting(XGB) and random forest(RF).The comparison of the methods showed that GBRT-FBIO and XGB-EOA models outperformed other models for shear modulus and damping of LCC.The p-value less than 0.0001 shows the significance of the used models in the response surface methodology(RSM)method.展开更多
Purpose:The major limitation of tumor microwave ablation(MWA)operation is the lack of predictability of the ablation zone before surgery.Operators rely on their individual experience to select a treatment plan,which i...Purpose:The major limitation of tumor microwave ablation(MWA)operation is the lack of predictability of the ablation zone before surgery.Operators rely on their individual experience to select a treatment plan,which is prone to either inadequate or excessive ablation.This paper aims to establish an ablation prediction model that guides MWA tumor surgical planning.Methods:An MWA process was first simulated by incorporating electromagnetic radiation equations,thermal equations,and optimized biological tissue parameters(dynamic dielectric and thermophysical parameters).The temperature distributions(the short/long diameters,and the total volume of the ablation zone)were then generated and verified by 60 cases ex vivo porcine liver experiments.Subsequently,a series of data were obtained from the simulated temperature distributions and to further fit the novel ablation coagulated area prediction model(ACAPM),thus rendering the ablation-dose table for the guiding surgical plan.The MWA clinical patient data and clinical devices suggested data were used to validate the accuracy and practicability of the established predicted model.Results:The 60 cases ex vivo porcine liver experiments demonstrated the accuracy of the simulated temperature distributions.Compared to traditional simulation methods,our approach reduces the long-diameter error of the ablation zone from 1.1 cm to 0.29 cm,achieving a 74%reduction in error.Further,the clinical data including the patients'operation results and devices provided values were consistent well with our predicated data,indicating the great potential of ACAPM to assist preoperative planning.展开更多
In order that the mechanism designed meets the requirements of kinematics with optimal dynamics behaviors, a quadratic optimization method is proposed based on the different characteristics of kinematic and dynamic op...In order that the mechanism designed meets the requirements of kinematics with optimal dynamics behaviors, a quadratic optimization method is proposed based on the different characteristics of kinematic and dynamic optimization. This method includes two steps of optimization, that is, kinematic and dynamic optimization. Meanwhile, it uses the results of the kinematic optimization as the constraint equations of dynamic optimization. This method is used in the parameters optimization of transplanting mechanism with elliptic planetary gears of high-speed rice seedling transplanter with remarkable significance. The parameters spectrum, which meets to the kinematic requirements, is obtained through visualized human-computer interactions in the kinematics optimization, and the optimal parameters are obtained based on improved genetic algorithm in dynamic optimization. In the dynamic optimization, the objective function is chosen as the optimal＇ dynamic behavior and the constraint equations are from the results of the kinematic optimization, This method is suitable for multi-objective optimization when both the kinematic and dynamic performances act as objective functions.展开更多
Three mutants of rice (Oryza sativa L. ), Mutant 1, Mutant 2 and Mutant 3, which were selected by high hydrostatic pressure (75 MPa), and their parent Yuexiangzhan were used to study the changes in chlorophyll fluores...Three mutants of rice (Oryza sativa L. ), Mutant 1, Mutant 2 and Mutant 3, which were selected by high hydrostatic pressure (75 MPa), and their parent Yuexiangzhan were used to study the changes in chlorophyll fluorescence during different growth stages. In all the three mutants, the function of PSⅡ was improved, F_v/F_m ratio of mutants increased compared to their parent at tillering and heading stage, and ΦPSⅡ also improved except for Mutant 2 at heading stage. Similar to their parent, the mutants exhibited slight photoinhibition at noon and almost complete recovery to initial levels of 6:00 after 18:00 at heading stage. At milking stage, the photoinhibition in the mutants was obvious, and recovered rapidly compared to the parent. Yields of individual plant and grain/straw ratio were also higher in three mutants than the parent. Results indicated that characteristics of chlorophyll fluorescence in leaves of mutants and their photoinhibition in the field had changed. It is suggested that high hydrostatic pressure induction could be applied as a new effective approach in high-yield rice breeding in the future.展开更多
According to the characteristic of elastic waves propagation in medium and the application of elastic waves method in rock mass engineering, the cranny mass with random crannies was regarded as quasi-isotropic cranny ...According to the characteristic of elastic waves propagation in medium and the application of elastic waves method in rock mass engineering, the cranny mass with random crannies was regarded as quasi-isotropic cranny mass. In accordance with the rock rupture mechanics, principle of energy balance and Castiglano＇s theorem, the relationship of effective dynamic parameters of elasticity （E, v, G） and cranny density parameters or porosity was put forward. On this basis, through the theory of elastic waves propagation in isotropic medium, the relationship between the elastic wave velocity and cranny density parameters and porosity was set up. The theoretical research results show that, in this kind of cranny rock masses, there is nonlinear relationships between the effective dynamic parameters of elasticity and wave velocities and the cranny density parameter or porosity; and with the increase of cranny density parameter or porosity of cranny rock masses, the effective dynamic modulus and the elastic wave velocities of cranny rock masses will decrease; and at the same time, when the cranny density parameter or porosity is very small, the effective dynamic modulus of elasticity and the elastic wave velocities change with the cranny density parameter, which can explain the sensitivity of effective elastic parameters and elastic wave velocities to cranny rock masses.展开更多
BACKGROUND Intestinal seromuscular bladder augmentation(SMBA)surgery has produced no mucosal-related complications,but its outcomes need to be studied.AIM To evaluate the safety and effectiveness of SMBA in the treatm...BACKGROUND Intestinal seromuscular bladder augmentation(SMBA)surgery has produced no mucosal-related complications,but its outcomes need to be studied.AIM To evaluate the safety and effectiveness of SMBA in the treatment of children with neurogenic bladder.METHODS A retrospective analysis of the clinical data of children with SMBA was performed from March 2008 to February 2018,and the data were compared with those of children receiving standard cystoplasty(SC).RESULTS In a cohort of 67 children who underwent bladder augmentation,the 46 children in the SC group had an average age of 10.6 years and a follow-up time of 36 mo,and the 21 children in the SMBA group had an average age of 7.6 years and a follow-up time of 29.7 mo.The preoperative and postoperative bladder volumes in the SMBA group were 151.7 mL and 200.4 mL,respectively,and those in the SC group were 173.9 mL and 387.0 mL,respectively.No significant difference in preoperative urinary dynamic parameters was found between the two groups,but the difference after operation was statistically significant.The main complications after SMBA were residual ureteral reflux and failed bladder augmentation,with incidences of 33.3%and 28.6%,respectively.In all 6 patients with failed augmentation in the SMBA group,ileum seromuscular patches were used for augmentation,and SC was chosen for reaugmentation.During reoperation,patch contracture and fibrosis were observed.CONCLUSION The improvement of urinary dynamic parameters in the SMBA group was significantly lower than that in the SC group.Children with SMBA had a higher probability of patch contracture and reaugmentation,which might be related to impaired blood supply and urine stimulation,and the sigmoid colon patch should be the priority.展开更多
基金National Key R&D Program of China(No.2017YFB1304000)Fundamental Research Funds for the Central Universities,China(No.2232023G-05-1)。
文摘The high-speed winding spindle employs a flexible support system incorporating rubber O-rings.By precisely configuring the structural parameters and the number of the O-rings,the spindle can stably surpass its critical speed points and maintain operational stability across the entire working speed range.However,the support stiffness and damping of rubber O-rings exhibit significant nonlinear frequency dependence.Conventional experimental methods for deriving equivalent stiffness and damping,based on the principle of the forced non-resonance method,require fabricating custom setups for each O-ring specification and conducting vibration tests at varying frequencies,resulting in low efficiency and high costs.This study proposes a hybrid simulation-experimental method for dynamic parameter identification.Firstly,the frequency-dependent dynamic parameters of a specific O-ring support system are experimentally obtained.Subsequently,a corresponding parametric finite element model is established to simulate and solve the equivalent elastic modulus and equivalent stiffness-damping coefficient of this O-ring support system.Ultimately,after iterative simulation,the simulated and experimental results achieve a 99.7%agreement.The parametric finite element model developed herein can directly simulate and inversely estimate frequency-dependent dynamic parameters for O-rings of different specifications but identical elastic modulus.
基金Project is supported by the National Natural Science Foundation of China (Grant Nos. 71071013,71001004,71071012,and71131001)the Fundamental Research Funds for the Central Universities,China (Grant No. 2011YJS241)
文摘An improved dynamic parameter model is presented based on cellular automata.The dynamic parameters,including direction parameter,empty parameter,and cognition parameter,are formulated to simplify tactically the process of making decisions for pedestrians.The improved model reflects the judgement of pedestrians on surrounding conditions and the action of choosing or decision.According to the two-dimensional cellular automaton Moore neighborhood we establish the pedestrian moving rule,and carry out corresponding simulations of pedestrian evacuation.The improved model considers the impact of pedestrian density near exits on the evacuation process.Simulated and experimental results demonstrate that the improvement makes sense due to the fact that except for the spatial distance to exits,people also choose an exit according to the pedestrian density around exits.The impact factors 伪,尾,and 纬 are introduced to describe transition payoff,and their optimal values are determined through simulation.Moreover,the effects of pedestrian distribution,pedestrian density,and the width of exits on the evacuation time are discussed.The optimal exit layout,i.e.,the optimal position and width,is offered.The comparison between the simulated results obtained with the improved model and that from a previous model and experiments indicates that the improved model can reproduce experimental results well.Thus,it has great significance for further study,and important instructional meaning for pedestrian evacuation so as to reduce the number of casualties.
文摘Based on Matsuoka＇s central pattern generator （CPG） model and taking quadruped as an example, the dynamics of CPG model was investigated through the single-parameter-analysis method and the numerical simulation technique. Simulation results indicate that the CPG model exhibits complex dynamics, while each parameter has specifically definitive influence trends on the CPG output. These conclusions were applied to control a quadrupedal robot to walk in different gaits, clear obstacle, and walk up- and down-slope successfully.
基金Supported by the National Natural Science Foundation of China(61333010,61134007and 21276078)“Shu Guang”project of Shanghai Municipal Education Commission,the Research Talents Startup Foundation of Jiangsu University(15JDG139)China Postdoctoral Science Foundation(2016M591783)
文摘Dynamic optimization problems(DOPs) described by differential equations are often encountered in chemical engineering. Deterministic techniques based on mathematic programming become invalid when the models are non-differentiable or explicit mathematical descriptions do not exist. Recently, evolutionary algorithms are gaining popularity for DOPs as they can be used as robust alternatives when the deterministic techniques are invalid. In this article, a technology named ranking-based mutation operator(RMO) is presented to enhance the previous differential evolution(DE) algorithms to solve DOPs using control vector parameterization. In the RMO, better individuals have higher probabilities to produce offspring, which is helpful for the performance enhancement of DE algorithms. Three DE-RMO algorithms are designed by incorporating the RMO. The three DE-RMO algorithms and their three original DE algorithms are applied to solve four constrained DOPs from the literature. Our simulation results indicate that DE-RMO algorithms exhibit better performance than previous non-ranking DE algorithms and other four evolutionary algorithms.
基金supported by Aeronautical Science Foundation of China(No.201916052001)China National Key R&D Program(No.2018YFB1309203)Foundation of the Graduate Innovation Center,Nanjing University of Aeronautics and Astronautics(No.xcxjh20210501)。
文摘The dynamic parameter identification of the robot is the basis for the design of the controller based on the dynamic model.Currently,the primary method for solving angular velocity and angular acceleration is to filter and smooth the position sequence and then form a differential signal.However,if the noise and the original signal overlap in the frequency domain,filtering the noise will also filter out the valuable information in the frequency band.This paper proposes an excitation trajectory based on Logistic function,which fully uses the information in the original signal and can accurately solve the angular velocity and angular acceleration without filtering and smoothing the position sequence.The joint angle of the excitation trajectory is mapped to the joint angular velocity and angular acceleration one by one so that the joint angular velocity and joint angular acceleration can be obtained directly according to the position.The genetic algorithm is used to optimize the excitation trajectory parameters to minimize the observation matrix’s condition number and further improve the identification accuracy.By using the strategy of iterative identification,the dynamic parameters identified in each iteration are substituted into the robot controller according to the previous position sequence until the tracking trajectory approaches the desired trajectory,and the actual joint angular velocity and angular acceleration converge to the expected value.The simulation results show that using the step-by-step strategy,the joint angular velocity and joint angular acceleration of the tracking trajectory quickly converge to the expected value,and the identification error of inertia parameters is less than 0.01 in three iterations.With the increase of the number of iterations,the identification error of inertial parameters can be further reduced.
基金supported by the Key project of the Education Department of Liaoning Province(Grant no.LJKZZ20220022)the Key R&D project of Liaoning Province of China(Grant no.2020JH2/10300079)。
文摘Based on the Monte Carlo method,we examined the dynamic magnetic behaviors and magnetocaloric effect of a Kagome lattice subjected to the influence of time-dependent oscillating and time-independent magnetic fields.We used the Ising model to describe the Kagome lattice and study the dynamic order parameters,blocking temperature,internal energy,and phase diagrams.The results revealed that exchange coupling increases the stability of the system and the bias field induces order;however,the time-dependent oscillating magnetic field induces disorder.In addition,the magnetocaloric properties,changes in magnetic entropy,and relative cooling power of the Kagome lattice were investigated.
文摘Dynamic magnetic properties of the mixed-spin(3/2,5/2)Ising graphene-like monolayer in an oscillating magnetic field are studied by means of Monte Carlo simulation.The effects of Hamiltonian parameters such as crystal field and time-dependent oscillating magnetic field on the dynamic order parameter,susceptibility and internal energy of the system are well presented and explained.Moreover,much attention has also been dedicated to the phase diagrams with different parameters in order to better comprehend the impacts of these parameters on the critical temperature.Our results reveal that the crystal fields of two sublattices have similar effects on the critical temperature,but the bias field and amplitude of oscillating field have opposite effects on it.We hope that our research can be of guiding significance to the theoretical and experimental studies of graphene-like monolayer.
基金This project was supported by the Scientific Research Foundation of Harbin Institute of Technology (HIT. 2001.01).
文摘In wireless networks, packet access is a popular mode, and the key problem is how to improve throughput and access delay performance, especially the throughput for wireless channels. These results will be a reference for not only a wireless channel but also a common MAC protocol.
文摘Many Internet-GIS have been implemented on the web and they are increasingly becoming an important part of multimedia cartography that has much more users as compared to traditional GIS production media.Internet GIS technology has provided the GIS dynamic information acquisition with technical support.Also,the visualization technology of electronic map has provided tools for GIS symbols with dynamic characteristics.On the basis of GIS dynamic information acquisition,the design idea and implementation methods of dynamic symbols in dynamic GIS are presented in this article.
基金sponsored by the State-level Public Welfare Scientific Research Courtyard Basic Scientific Research ProgramInstitute of Crustal Dynamics+1 种基金CEA (ZDJ2009-07ZDJ2009-23)
文摘The Tianjin coastal area is a typical soft soil region,where the soil is a marine deposit of the late Quaternary.The soil dynamic parameters from seismic risk assessment reports are collected,and drilling of 15 holes was carried out to sample the soils and measure their dynamic characteristics.The data was divided into 7 types based on lithology,namely,muddy clay,muddy silty clay,silt,silty clay,clay,silty sand and fine sand.Statistics of the dynamic parameters of these soils are collected to obtain the mean values of dynamic shear modulus ratio and damping ratio at different depths.Then,two typical drill holes are selected to establish the soil dynamic models to investigate the seismic response in different cases.The dynamic seismic responses of soil are calculated using the statistical values of this paper,and the values of Code(1994) and those recommended by Yuan Xiaoming et al.(2000),respectively.The applicability and pertinence of the statistical value obtained in this paper are demonstrated by the response spectrum shape,peak ground acceleration and response spectral characteristics.The results can be taken as a reference of the soil dynamic value in this area and can be used in the seismic risk assessment of engineering projects.
文摘In this paper, we study the initial-boundary value problem with rigid wall for the equations in combustion dynamics with largy parameter. Introducing variable scalar norms and two seminorms, making use of the vorticity operator, overcome the difficulty from the large parameter. By energy estimation, the existence and unique theorems of local smooth solution is proved.
文摘In this paper, dynamic soil parameters derived from Dalian area seismic risk assessment reports are collected. In this study, the measurement data is divided into 7 types, i.e. silty clay, muddy silty clay, clay, medium sand, rock fragments, backfill soil and fully-weathered slate. Statistics of the dynamic parameters of these soils are carried out to obtain the mean values of dynamic shear modulus ratio and damping ratio. Typical drill holes are selected to establish dynamic soil models to investigate the seismic response for various cases. The dynamic parameters of the models are taken from the statistical values of this study, the standard values of code 94 (i.e. the dynamic soil parameters for Dalian seismic microzonation), and the recommended values by Yuan Xiaoming et al. (2000) respectively. The calculated results of peak ground acceleration are compared with the response spectral characteristics. The results show that the statistical values are approximate to the values recommended by Yuan Xiaoming, et al. (2000), but different greatly with the standard values in code 94.
基金Supported by the National Key Technologies Research&Development Program(2017YFC0804607)the National Key Basic Research Development Plan(973 Proect)(2014CB047000)
文摘By using the technique of the split Hopkinson pressure bar（ SHPB）,impact tests at different stress wavelengths（ 0. 8-2. 0 m） and strain rates（ 20-120 s^（-1）） were conducted to study the dynamic mechanical properties and damage accumulation evolution lawof granite. Test results showthat the dynamic compressive strength and strain rate of granite have a significantly exponential correlation;the relationship between peak strain and strain rate is approximately linear,and the increase of wavelengths generally makes the level of peak strain uplift. The multiple-impacts test at a lowstrain rate indicates that at the same wavelength,the cumulative damage of granite shows an exponential increasing form with the increase of strain rate; when keeping the increase of strain rate constant and increasing the stress wavelength,the damage accumulation effect of granite is intensified and still shows an exponential increasing form; under the effect of multiple impacts,the damage development trend of granite is similar overall,but the increase rate is accelerating. Therefore the damage evolution model was established on the basis of the exponential function while the physical meaning of parameters in the model was determined. The model can reflect the effect of the wave parameters and multiple impacts. The validity of the model and the physical meaning of the parameters were verified by the test,which further offer a reference for correlational research and engineering application for the granite.
基金the Special Research Fund for Earthquake Science,China (200708023)
文摘Source spectra,corner frequency and zero frequency amplitudes in near-source conditions were measured using waveform data from 989 earthquakes with magnitudes larger than ML2.0 observed by the Beijing Digital Telemetry Seismic Network in the Capital Circle Region of China and its surrounding areas from January 2002 to June 2006 by the Brune model.Relevant formulas that were used for the calculation of dynamic source parameters include rupture radius,seismic moment,seismic energy,stress drop,and apparent stress.Scaling relations and characteristics of temporal-spatial variations of these dynamic parameters before the MS5.1 Wenan earthquake in Hebei Province that occurred on July 20,2006 were analyzed.Results show that apparent stress,stress drop,and the ratio of seismic energy to the rupture radius had relatively high values in some areas before the Wenan earthquake.These high-value concentration areas were mainly distributed in the North China Plain seismic zone.As is seen from the time curves,parameters,such as apparent stress,stress drop,and ratio of seismic energy to rupture radius underwent significant ascending processes before the Wenan earthquake,but the variation in the corner frequency showed a descending trend.This result might be related to the enhancement of stress in the North China Plain seismic zone before the earthquake.
文摘The investigation of leachate-contaminated clay(LCC)is essential for landfill engineering assessment and achievement of sustainable development goals.Several static and dynamic laboratory tests,including unconfined compressive strength(UCS),California bearing ratio(CBR),and cyclic simple shear,are conducted.Cyclic simple shear experiments on LCCs were performed to evaluate the damping and shear modulus.The investigated factors are vertical load(VL),leachate content(LC),frequency(F),and shear strain(ShS)for LCC.Forensic-based investigation optimization(FBIO)and equilibrium optimizer algorithm(EOA)were utilized in addition to multiple types of ensemble models,including adaptive boosting(ADB),gradient boosting regression tree(GBRT),extreme gradient boosting(XGB) and random forest(RF).The comparison of the methods showed that GBRT-FBIO and XGB-EOA models outperformed other models for shear modulus and damping of LCC.The p-value less than 0.0001 shows the significance of the used models in the response surface methodology(RSM)method.
基金supported by the National Major Scientific Instruments and Equipment Development Project Funded by the National Natural Science Foundation of China(81827803)the Jiangsu Province Key Research and Development Program(Social Development)Project(BE2020705).
文摘Purpose:The major limitation of tumor microwave ablation(MWA)operation is the lack of predictability of the ablation zone before surgery.Operators rely on their individual experience to select a treatment plan,which is prone to either inadequate or excessive ablation.This paper aims to establish an ablation prediction model that guides MWA tumor surgical planning.Methods:An MWA process was first simulated by incorporating electromagnetic radiation equations,thermal equations,and optimized biological tissue parameters(dynamic dielectric and thermophysical parameters).The temperature distributions(the short/long diameters,and the total volume of the ablation zone)were then generated and verified by 60 cases ex vivo porcine liver experiments.Subsequently,a series of data were obtained from the simulated temperature distributions and to further fit the novel ablation coagulated area prediction model(ACAPM),thus rendering the ablation-dose table for the guiding surgical plan.The MWA clinical patient data and clinical devices suggested data were used to validate the accuracy and practicability of the established predicted model.Results:The 60 cases ex vivo porcine liver experiments demonstrated the accuracy of the simulated temperature distributions.Compared to traditional simulation methods,our approach reduces the long-diameter error of the ablation zone from 1.1 cm to 0.29 cm,achieving a 74%reduction in error.Further,the clinical data including the patients'operation results and devices provided values were consistent well with our predicated data,indicating the great potential of ACAPM to assist preoperative planning.
基金This project is supported by National Natural Science Foundation of China (No.50275137)Basic Research Major Project of China Science and Technology Ministry(No.2004CCA05700)Provincial Natural Science Foundation of Zhejiang, China (No. Z105706).
文摘In order that the mechanism designed meets the requirements of kinematics with optimal dynamics behaviors, a quadratic optimization method is proposed based on the different characteristics of kinematic and dynamic optimization. This method includes two steps of optimization, that is, kinematic and dynamic optimization. Meanwhile, it uses the results of the kinematic optimization as the constraint equations of dynamic optimization. This method is used in the parameters optimization of transplanting mechanism with elliptic planetary gears of high-speed rice seedling transplanter with remarkable significance. The parameters spectrum, which meets to the kinematic requirements, is obtained through visualized human-computer interactions in the kinematics optimization, and the optimal parameters are obtained based on improved genetic algorithm in dynamic optimization. In the dynamic optimization, the objective function is chosen as the optimal＇ dynamic behavior and the constraint equations are from the results of the kinematic optimization, This method is suitable for multi-objective optimization when both the kinematic and dynamic performances act as objective functions.
基金This work was supported by the National Natural Sci-ence Foundation of China(30070426)the Program of Agri-cultural Office of Chinese Acdemy of Sciencesthe State Key Basic Research and Development Plan of China(G1 998010100).
文摘Three mutants of rice (Oryza sativa L. ), Mutant 1, Mutant 2 and Mutant 3, which were selected by high hydrostatic pressure (75 MPa), and their parent Yuexiangzhan were used to study the changes in chlorophyll fluorescence during different growth stages. In all the three mutants, the function of PSⅡ was improved, F_v/F_m ratio of mutants increased compared to their parent at tillering and heading stage, and ΦPSⅡ also improved except for Mutant 2 at heading stage. Similar to their parent, the mutants exhibited slight photoinhibition at noon and almost complete recovery to initial levels of 6:00 after 18:00 at heading stage. At milking stage, the photoinhibition in the mutants was obvious, and recovered rapidly compared to the parent. Yields of individual plant and grain/straw ratio were also higher in three mutants than the parent. Results indicated that characteristics of chlorophyll fluorescence in leaves of mutants and their photoinhibition in the field had changed. It is suggested that high hydrostatic pressure induction could be applied as a new effective approach in high-yield rice breeding in the future.
基金Projects(50334060 50474025) supported by the National Natural Science Foundation of China project(2005CB221502)supported by the National Key Fundamental Research and Development Programof China
文摘According to the characteristic of elastic waves propagation in medium and the application of elastic waves method in rock mass engineering, the cranny mass with random crannies was regarded as quasi-isotropic cranny mass. In accordance with the rock rupture mechanics, principle of energy balance and Castiglano＇s theorem, the relationship of effective dynamic parameters of elasticity （E, v, G） and cranny density parameters or porosity was put forward. On this basis, through the theory of elastic waves propagation in isotropic medium, the relationship between the elastic wave velocity and cranny density parameters and porosity was set up. The theoretical research results show that, in this kind of cranny rock masses, there is nonlinear relationships between the effective dynamic parameters of elasticity and wave velocities and the cranny density parameter or porosity; and with the increase of cranny density parameter or porosity of cranny rock masses, the effective dynamic modulus and the elastic wave velocities of cranny rock masses will decrease; and at the same time, when the cranny density parameter or porosity is very small, the effective dynamic modulus of elasticity and the elastic wave velocities change with the cranny density parameter, which can explain the sensitivity of effective elastic parameters and elastic wave velocities to cranny rock masses.
文摘BACKGROUND Intestinal seromuscular bladder augmentation(SMBA)surgery has produced no mucosal-related complications,but its outcomes need to be studied.AIM To evaluate the safety and effectiveness of SMBA in the treatment of children with neurogenic bladder.METHODS A retrospective analysis of the clinical data of children with SMBA was performed from March 2008 to February 2018,and the data were compared with those of children receiving standard cystoplasty(SC).RESULTS In a cohort of 67 children who underwent bladder augmentation,the 46 children in the SC group had an average age of 10.6 years and a follow-up time of 36 mo,and the 21 children in the SMBA group had an average age of 7.6 years and a follow-up time of 29.7 mo.The preoperative and postoperative bladder volumes in the SMBA group were 151.7 mL and 200.4 mL,respectively,and those in the SC group were 173.9 mL and 387.0 mL,respectively.No significant difference in preoperative urinary dynamic parameters was found between the two groups,but the difference after operation was statistically significant.The main complications after SMBA were residual ureteral reflux and failed bladder augmentation,with incidences of 33.3%and 28.6%,respectively.In all 6 patients with failed augmentation in the SMBA group,ileum seromuscular patches were used for augmentation,and SC was chosen for reaugmentation.During reoperation,patch contracture and fibrosis were observed.CONCLUSION The improvement of urinary dynamic parameters in the SMBA group was significantly lower than that in the SC group.Children with SMBA had a higher probability of patch contracture and reaugmentation,which might be related to impaired blood supply and urine stimulation,and the sigmoid colon patch should be the priority.
