The dynamic optimal interpolation(DOI)method is a technique based on quasi-geostrophic dynamics for merging multi-satellite altimeter along-track observations to generate gridded absolute dynamic topography(ADT).Compa...The dynamic optimal interpolation(DOI)method is a technique based on quasi-geostrophic dynamics for merging multi-satellite altimeter along-track observations to generate gridded absolute dynamic topography(ADT).Compared with the linear optimal interpolation(LOI)method,the DOI method can improve the accuracy of gridded ADT locally but with low computational efficiency.Consequently,considering both computational efficiency and accuracy,the DOI method is more suitable to be used only for regional applications.In this study,we propose to evaluate the suitable region for applying the DOI method based on the correlation between the absolute value of the Jacobian operator of the geostrophic stream function and the improvement achieved by the DOI method.After verifying the LOI and DOI methods,the suitable region was investigated in three typical areas:the Gulf Stream(25°N-50°N,55°W-80°W),the Japanese Kuroshio(25°N-45°N,135°E-155°E),and the South China Sea(5°N-25°N,100°E-125°E).We propose to use the DOI method only in regions outside the equatorial region and where the absolute value of the Jacobian operator of the geostrophic stream function is higher than1×10^(-11).展开更多
This paper uses dynamic programming principle and network graph method to deal with optimal design for the reliability of a mechanical system considering production cost.
This paper studies the economic environmental energy-saving day-ahead scheduling problem of power systems considering wind generation(WG)and demand response(DR)by means of multi-objective dynamic optimal power flow(MD...This paper studies the economic environmental energy-saving day-ahead scheduling problem of power systems considering wind generation(WG)and demand response(DR)by means of multi-objective dynamic optimal power flow(MDOPF).Within the model,fuel cost,carbon emission and active power losses are taken as objectives,and an integrated dispatch modeof conventional coal-fired generation,WG and DRis utilized.The corresponding solution process to the MDOPF is based on ahybrid of a non-dominated sorting genetic algorithm-II(NSGA-II)and fuwzy satisfaction-maximizing method,where NSGA-II obtains the Pareto frontier and the fuzzy satisfaction-maximizing method is the chosen strategy.Illustrative cases of different scenarios are performed based on an IEEE 6-units\,30-nodes system,to verify the proposed model and the solution process,as well as the benefits obtained by the DR into power system.展开更多
Battery energy storage systems(BESS)are instrumental in the transition to a low carbon electrical network with enhanced flexibility,however,the set objective can be accomplished only through suitable scheduling of the...Battery energy storage systems(BESS)are instrumental in the transition to a low carbon electrical network with enhanced flexibility,however,the set objective can be accomplished only through suitable scheduling of their operation.This paper develops a dynamic optimal power flow(DOPF)-based scheduling framework to optimize the day(s)-ahead operation of a grid-scale BESS aiming to mitigate the predicted limits on the renewable energy generation as well as smooth out the network demand to be supplied by conventional generators.In DOPF,all the generating units,including the ones that model the exports and imports of the BESS,across the entire network and the complete time horizon are integrated on to a single network.Subsequently,an AC-OPF is applied to dispatch their power outputs to minimize the total generation cost,while satisfying the power balance equations,and handling the unit and network constraints at each time step coupled with intertemporal constraints associated with the state of charge(SOC).Furthermore,the DOPF developed here entails the frequently applied constant current-constant voltage charging profile,which is represented in the SOC domain.Considering the practical application of a 1 MW BESS on a particular 33 kV network,the scheduling framework is designed to meet the pragmatic requirements of the optimum utilization of the available energy capacity of BESS in each cycle,while completing up to one cycle per day.展开更多
A design and optimization approach of dynamic and control performance for a two-DOF planar manipulator was proposed.After the kinematic and dynamic analysis,several advantages of the mechanism were illustrated,which m...A design and optimization approach of dynamic and control performance for a two-DOF planar manipulator was proposed.After the kinematic and dynamic analysis,several advantages of the mechanism were illustrated,which made it possible to obtain good dynamic and control performances just through mechanism optimization.Based on the idea of design for control(DFC),a novel kind of multi-objective optimization model was proposed.There were three optimization objectives:the index of inertia,the index describing the dynamic coupling effects and the global condition number.Other indexes to characterize the designing requirements such as the velocity of end-effector,the workspace size,and the first mode natural frequency were regarded as the constraints.The cross-section area and length of the linkages were chosen as the design variables.NSGA-II algorithm was introduced to solve this complex multi-objective optimization problem.Additional criteria from engineering experience were incorporated into the selecting of final parameters among the obtained Pareto solution sets.Finally,experiments were performed to validate the linear dynamic structure and control performances of the optimized mechanisms.A new expression for measuring the dynamic coupling degree with clear physical meaning was proposed.The results show that the optimized mechanism has an approximate decoupled dynamics structure,and each active joint can be regarded as a linear SISO system.The control performances of the linear and nonlinear controllers were also compared.It can be concluded that the optimized mechanism can achieve good control performance only using a linear controller.展开更多
Wireless sensor networks are extremely vulnerable to various security threats.The intrusion detection method based on game theory can effectively balance the detection rate and energy consumption of the system.The acc...Wireless sensor networks are extremely vulnerable to various security threats.The intrusion detection method based on game theory can effectively balance the detection rate and energy consumption of the system.The accurate analysis of the attack behavior of malicious sensor nodes can help to configure intrusion detection system,reduce unnecessary system consumption and improve detection efficiency.However,the completely rational assumption of the traditional game model will cause the established model to be inconsistent with the actual attack and defense scenario.In order to formulate a reasonable and effective intrusion detection strategy,we introduce evolutionary game theory to establish an attack evolution game model based on optimal response dynamics,and then analyze the attack behavior of malicious sensor nodes.Theoretical analysis and simulation results show that the evolution trend of attacks is closely related to the number of malicious sensors in the network and the initial state of the strategy,and the attacker can set the initial strategy so that all malicious sensor nodes will eventually launch attacks.Our work is of great significance to guide the development of defense strategies for intrusion detection systems.展开更多
Cloud computing has become an essential technology for the management and processing of large datasets,offering scalability,high availability,and fault tolerance.However,optimizing data replication across multiple dat...Cloud computing has become an essential technology for the management and processing of large datasets,offering scalability,high availability,and fault tolerance.However,optimizing data replication across multiple data centers poses a significant challenge,especially when balancing opposing goals such as latency,storage costs,energy consumption,and network efficiency.This study introduces a novel Dynamic Optimization Algorithm called Dynamic Multi-Objective Gannet Optimization(DMGO),designed to enhance data replication efficiency in cloud environments.Unlike traditional static replication systems,DMGO adapts dynamically to variations in network conditions,system demand,and resource availability.The approach utilizes multi-objective optimization approaches to efficiently balance data access latency,storage efficiency,and operational costs.DMGO consistently evaluates data center performance and adjusts replication algorithms in real time to guarantee optimal system efficiency.Experimental evaluations conducted in a simulated cloud environment demonstrate that DMGO significantly outperforms conventional static algorithms,achieving faster data access,lower storage overhead,reduced energy consumption,and improved scalability.The proposed methodology offers a robust and adaptable solution for modern cloud systems,ensuring efficient resource consumption while maintaining high performance.展开更多
Airborne pulse radar and communication systems are essential for precise detection and collision avoidance,ensuring that aircraft operate safely and efficiently.A major challenge in spectrum sharing is the allocation ...Airborne pulse radar and communication systems are essential for precise detection and collision avoidance,ensuring that aircraft operate safely and efficiently.A major challenge in spectrum sharing is the allocation of resources in both the time and frequency domains,aiming to minimize inter-system interference as the available spectrum fluctuates over time.In this paper,regarding maximization of detection probability and spectrum utilization efficiency as two fundamental objectives,a novel Dynamic Spectrum and Power Allocation based on Genetic Algorithm(GA-DSPA)model is proposed,which dynamically allocates communication channel frequency and power under the constraints of pulse radar detection probability and signal-to-interferenceplus-noise ratio of communication.To solve this bi-objective model,a non-dominated sortingbased multi-objective genetic algorithm is developed.A novel environment perception strategy and offspring sorting technique based on radar echoes are integrated into the optimization framework.Simulation results indicate that by integrating environmental monitoring mechanisms and dynamic adaptation strategies,the proposed method effectively tracks the evolving Paretooptimal Fronts(Po Fs),thereby ensuring optimal performance for both co-located pulse radar and communication systems.Hardware test results confirm that within the GA-DSPA framework,the pulse radar achieves higher detection probabilities under identical conditions,while the communication system realizes increased average throughput.展开更多
This work presents a nonlinear integral-ameliorated model for handling dynamic optimization problems with affine constraints.They pose a challenge as their optimal solutions evolve with time.Traditional iteration-base...This work presents a nonlinear integral-ameliorated model for handling dynamic optimization problems with affine constraints.They pose a challenge as their optimal solutions evolve with time.Traditional iteration-based methods that exactly solve the problem at each time instant,fail to precisely and realtime track the solution due to computational and communication bottlenecks.Our model,through rigorous theoretical analyses,is able to reduce the optimality gap(i.e.,the difference between the model state and optimal solution)to zero in a finite time,and thus,track the solution online.Besides,perturbance is taken into account.We prove that under certain conditions,our model can totally tolerate an important kind of noise that we call“errorrelated noise”.In numerical experiments,compared with six existing methods,our model exhibits superior robustness when contaminated by the error-related noise.The key techniques in the model design involve employing the zeroing neural network to leverage time-derivative information,and introducing an integral term as well as the class C_(L)^(0)functions to enhance convergence and noise resistance.Finally,we establish a model-free control framework for a surgical manipulator with the remote-center-of-motion constraint and compare the performances of the framework based on different models in simulations.The results indicate that our model achieves the best performance among various models employed within the framework.展开更多
Structural Reliability-Based Topology Optimization(RBTO),as an efficient design methodology,serves as a crucial means to ensure the development ofmodern engineering structures towards high performance,long service lif...Structural Reliability-Based Topology Optimization(RBTO),as an efficient design methodology,serves as a crucial means to ensure the development ofmodern engineering structures towards high performance,long service life,and high reliability.However,in practical design processes,topology optimization must not only account for the static performance of structures but also consider the impacts of various responses and uncertainties under complex dynamic conditions,which traditional methods often struggle accommodate.Therefore,this study proposes an RBTO framework based on a Kriging-assisted level set function and a novel Dynamic Hybrid Particle Swarm Optimization(DHPSO)algorithm.By leveraging the Kriging model as a surrogate,the high cost associated with repeatedly running finite element analysis processes is reduced,addressing the issue of minimizing structural compliance.Meanwhile,the DHPSO algorithm enables a better balance between the population’s developmental and exploratory capabilities,significantly accelerating convergence speed and enhancing global convergence performance.Finally,the proposed method is validated through three different structural examples,demonstrating its superior performance.Observed that the computational that,compared to the traditional Solid Isotropic Material with Penalization(SIMP)method,the proposed approach reduces the upper bound of structural compliance by approximately 30%.Additionally,the optimized results exhibit clear material interfaces without grayscale elements,and the stress concentration factor is reduced by approximately 42%.Consequently,the computational results fromdifferent examples verify the effectiveness and superiority of this study across various fields,achieving the goal of providing more precise optimization results within a shorter timeframe.展开更多
Considering the self-excited and forced vibrations in high-speed milling processes, a novel method for dynamic optimization of system stability is used to determine the cutting parameters and structural parameters by ...Considering the self-excited and forced vibrations in high-speed milling processes, a novel method for dynamic optimization of system stability is used to determine the cutting parameters and structural parameters by increasing the chatter free material removal rate （CF-MRR） and surface finish. The method is hased on the theory of the chatter stability and the semi-bandwidth of the resonant region. The objective function of the method is material removal rate（MRR）,the constraints are chatter stability and surface finish, and the optimizing variables are cutting and structural parameters. The optimization procedure is stated. The method is applied to a milling system and CF-MRR is increased 18.86%. It is shown that the influences of the chatter stability and the resonance are simultaneously considered in the dynamic optimization of the milling system for increasing CF-MRR and the surface finish.展开更多
Aiming at the problems in current cam profile optimization processes, such as simple dynamics models, limited geometric accuracy and low design automatization level, a new dynamic optimization mode is put forward. Bas...Aiming at the problems in current cam profile optimization processes, such as simple dynamics models, limited geometric accuracy and low design automatization level, a new dynamic optimization mode is put forward. Based on the parameterization modeling technique of MSC. ADAMS platform, the different steps in current mode are reorganized, thus obtaining an upgraded mode called the ＂parameterized-prototype-based cam profile dynamic optimization mode＂. A parameterized prototype（PP） of valve mechanism is constructed in the course of dynamic optimization for cam profiles. Practically, by utilizing PP and considering the flexibility of the parts in valve mechanism, geometric accuracy and design automatization are improved.展开更多
This article presents an adaptive intelligent control strategy applied to a lumped-parameter evaporator model,i.e.,a simplified dynamic representation treating the evaporator as a single thermal node with uniform temp...This article presents an adaptive intelligent control strategy applied to a lumped-parameter evaporator model,i.e.,a simplified dynamic representation treating the evaporator as a single thermal node with uniform temperature distribution,suitable for control design due to its balance between physical fidelity and computational simplicity.The controller uses a wavelet-based neural proportional,integral,derivative(PID)controller with IIR filtering(infinite impulse response).The dynamic model captures the essential heat and mass transfer phenomena through a nonlinear energy balance,where the cooling capacity“Qevap”is expressed as a non-linear function of the compressor frequency and the temperature difference,specifically,Q_(evap)=k_(1)u(T_(in)−T_(e))with u as compressor frequency,Te evaporator temperature,and Tin inlet fluid temperature.The operating conditions of the system,in general terms,focus on the following variables,the overall thermal capacity is 1000 J/K,typical for small-capacity heat exchangers,The mass flow is 0.05 kg/s,typical for secondary liquid cooling circuits,the overall loss coefficient of 50 W/K that corresponds to small evaporators with partial insulation,the temperatures(inlet)of 10℃and the temperature of environment of 25℃,thermal load of 200 W that corresponds to a small-scaled air conditioning applications.To handle system nonlinearities and improve control performance,aMorlet wavelet-based neural network(Wavenet)is used to dynamically adjust the PID gains online.An IIR filter is incorporated to smooth the adaptive gains,improving stability and reducing oscillations.In contrast to prior wavelet-or neural-adaptive PID controllers in HVAC applications,which typically adjust gains without explicit filtering or not tailored to evaporator dynamics,this work introduces the first PID–Wavenet scheme augmented with an IIR-based stabilization layer,specifically designed to address the combined challenges of nonlinear evaporator behavior,gain oscillation,and real-time implementability.The proposed controller(PID-Wavenet+IIR)is implemented and validated inMATLAB/Simulink,demonstrating superior performance compared to a conventional PID tuned using Simulink’s auto-tuning function.Key results include a reduction in settling time from 13.3 to 8.2 s,a reduction in overshoot from 3.5%to 0.8%,a reduction in steady-state error from 0.12℃ to 0.02℃and a 13%reduction in energy overall consumption.The controller also exhibits greater robustness and adaptability under varying thermal loads.This explicit integration of wavelet-driven adaptation with IIR-filtered gain shaping constitutes the main methodological contribution and novelty of the work.These findings validate the effectiveness of the wavelet-based adaptive approach for advanced thermal management in refrigeration and HVAC systems,with potential applications in controlling variable-speed compressors,liquid chillers,and compact cooling units.展开更多
Considering the impact of terminal impact time constraints and the state information of maneuvering targets on the guidance accuracy in multi-UAV cooperative guidance,this paper proposes an impact time cooperative con...Considering the impact of terminal impact time constraints and the state information of maneuvering targets on the guidance accuracy in multi-UAV cooperative guidance,this paper proposes an impact time cooperative control guidance law(ITCCG)that combines the optimal error dynamics with an improved adaptive cubature Kalman filter(IACKF)algorithm.First,a terminal impact time feedback term is introduced into proportional navigation guidance based on the relative virtual guidance model,and terminal time control is achieved through optimal error dynamics.Then,the Huber loss function is used to reduce the impact of measurement outliers,and the diagonal decomposition is applied to address the issue of non-positive definite matrices that cannot undergo Cholesky decomposition.Finally,the ITCCG and IACKF algorithms combined achieve multi-UAV time-cooperated guidance based on maneuvering target state estimation.Simulation results show that the proposed algorithm effectively reduces the target state estimation error and achieves cooperative guidance within the desired time frame.展开更多
Autonomous excavation operation is a major trend in the development of a new generation of intelligent tunnel boring machines(TBMs).However,existing technologies are limited to supervised machine learning and static o...Autonomous excavation operation is a major trend in the development of a new generation of intelligent tunnel boring machines(TBMs).However,existing technologies are limited to supervised machine learning and static optimization,which cannot outperform human operation and deal with ever changing geological conditions and the long-term performance measure.The aim of this study is to resolve the problem of dynamic optimization of the shield excavation performance,as well as to achieve autonomous optimal excavation.In this study,a novel autonomous optimal excavation approach that integrates deep reinforcement learning and optimal control is proposed for shield machines.Based on a first-principles analysis of the machine-ground interaction dynamics of the excavation process,a deep neural network model is developed using construction field data consisting of 1.1 million samples.The multi-system coupling mechanism is revealed by establishing an overall system model.Based on the overall system analysis,the autonomous optimal excavation problem is decomposed into a multi-objective dynamic optimization problem and an optimal control problem.Subsequently,a dimensionless multi-objective comprehensive excavation performance measure is proposed.A deep reinforcement learning method is used to solve for the optimal action sequence trajectory,and optimal closed-loop feedback controllers are designed to achieve accurate execution.The performance of the proposed approach is compared to that of human operation by using the construction field data.The simulation results show that the proposed approach not only has the potential to replace human operation but also can significantly improve the comprehensive excavation performance.展开更多
Dynamic optimization problems are a kind of optimization problems that involve changes over time. They pose a serious challenge to traditional optimization methods as well as conventional genetic algorithms since the ...Dynamic optimization problems are a kind of optimization problems that involve changes over time. They pose a serious challenge to traditional optimization methods as well as conventional genetic algorithms since the goal is no longer to search for the optimal solution（s） of a fixed problem but to track the moving optimum over time. Dynamic optimization problems have attracted a growing interest from the genetic algorithm community in recent years. Several approaches have been developed to enhance the performance of genetic algorithms in dynamic environments. One approach is to maintain the diversity of the population via random immigrants. This paper proposes a hybrid immigrants scheme that combines the concepts of elitism, dualism and random immigrants for genetic algorithms to address dynamic optimization problems. In this hybrid scheme, the best individual, i.e., the elite, from the previous generation and its dual individual are retrieved as the bases to create immigrants via traditional mutation scheme. These elitism-based and dualism-based immigrants together with some random immigrants are substituted into the current population, replacing the worst individuals in the population. These three kinds of immigrants aim to address environmental changes of slight, medium and significant degrees respectively and hence efficiently adapt genetic algorithms to dynamic environments that are subject to different severities of changes. Based on a series of systematically constructed dynamic test problems, experiments are carried out to investigate the performance of genetic algorithms with the hybrid immigrants scheme and traditional random immigrants scheme. Experimental results validate the efficiency of the proposed hybrid immigrants scheme for improving the performance of genetic algorithms in dynamic environments.展开更多
To solve dynamic optimization problem of chemical process (CPDOP), a hybrid differential evolution algorithm, which is integrated with Alopex and named as Alopex-DE, was proposed. In Alopex-DE, each original individua...To solve dynamic optimization problem of chemical process (CPDOP), a hybrid differential evolution algorithm, which is integrated with Alopex and named as Alopex-DE, was proposed. In Alopex-DE, each original individual has its own symbiotic individual, which consists of control parameters. Differential evolution operator is applied for the original individuals to search the global optimization solution. Alopex algorithm is used to co-evolve the symbiotic individuals during the original individual evolution and enhance the fitness of the original individuals. Thus, control parameters are self-adaptively adjusted by Alopex to obtain the real-time optimum values for the original population. To illustrate the whole performance of Alopex-DE, several varietal DEs were applied to optimize 13 benchmark functions. The results show that the whole performance of Alopex-DE is the best. Further, Alopex-DE was applied to solve 4 typical CPDOPs, and the effect of the discrete time degree on the optimization solution was analyzed. The satisfactory result is obtained.展开更多
The dynamic dexterity is an important issue for manipulator design, some indices were proposed for analyzing dynamic dexterity, but they can evaluate the dynamic performance just at one pose in the workspaee of the ma...The dynamic dexterity is an important issue for manipulator design, some indices were proposed for analyzing dynamic dexterity, but they can evaluate the dynamic performance just at one pose in the workspaee of the manipulator, and can＇t be applied to dynamic design expediently. Much work has been done in the kinematic optimization, but the work in the dynamic optimization is much less. A global dynamic condition number index is proposed and applied to the dynamic optimization design the parallel manipulator. This paper deals with the dynamic manipulability and dynamic optimization of a two degree-of-freedom （DOF） parallel manipulator. The particular velocity and particular angular velocity matrices of each moving part about the part＇s pivot point are derived fi＇om the kinematic formulation of the manipulator, and the inertial force and inertial movement are obtained utilizing Newton-Euler formulation, then the inverse dynamic model of the parallel manipulator is proposed based on the virtual work principle. The general inertial ellipsoid and dynamic manipulability ellipsoid are applied to evaluate the dynamic performance of the manipulator, a global dynamic condition number index based on the condition number of general inertial matrix in the workspace is proposed, and then the link lengths of the manipulator is redesigned to optimize the dynamic manipulability by this index. The dynamic manipulability of the origin mechanism and the optimized mechanism are compared, the result shows that the optimized one is much better. The global dynamic condition number index has good effect in evaluating the dynamic dexterity of the whole workspace, and is efficient in the dynamic optimal design of the parallel manipulator.展开更多
The solutions of dynamic optimization problems are usually very difficult due to their highly nonlinear and multidimensional nature. 13enetic algorithm （GA） has been proved to be a teasibte method when the gradient ...The solutions of dynamic optimization problems are usually very difficult due to their highly nonlinear and multidimensional nature. 13enetic algorithm （GA） has been proved to be a teasibte method when the gradient is difficult to calculate. Its advantage is that the control profiles at all time stages are optimized simultaneously, but its convergence is very slow in the later period of evolution and it is easily trapped in the local optimum. In this study, a hybrid improved genetic algorithm （HIGA） for solving dynamic optimization problems is proposed to overcome these defects. Simplex method （SM） is used to perform the local search in the neighborhood of the optimal solution. By using SM, the ideal searching direction of global optimal solution could be found as soon as possible and the convergence speed of the algorithm is improved. The hybrid algorithm presents some improvements, such as protecting the best individual, accepting immigrations, as well as employing adaptive crossover and Ganssian mutation operators. The efficiency of the proposed algorithm is demonstrated by solving several dynamic optimization problems. At last, HIGA is applied to the optimal production of secreted protein in a fed batch reactor and the optimal feed-rate found by HIGA is effective and relatively stable.展开更多
This paper proposes a new three-dimensional optimal guidance law for impact time control with seeker’s Field-of-View(FOV) constraint to intercept a stationary target. The proposed guidance law is devised in conjuncti...This paper proposes a new three-dimensional optimal guidance law for impact time control with seeker’s Field-of-View(FOV) constraint to intercept a stationary target. The proposed guidance law is devised in conjunction with the concept of biased Proportional Navigation Guidance(PNG). The guidance law developed leverages a nonlinear function to ensure the boundedness of velocity lead angle to cater to the seeker’s FOV limit. It is proven that the impact time error is nullified in a finite-time under the proposed method. Additionally, the optimality of the biased command is theoretically analyzed. Numerical simulations confirm the superiority of the proposed method and validate the analytic findings.展开更多
基金supported by National Natural Science Foundation of China under Grants 42192531 and 42192534the Special Fund of Hubei Luojia Laboratory(China)under Grant 220100001the Natural Science Foundation of Hubei Province for Distinguished Young Scholars(China)under Grant 2022CFA090。
文摘The dynamic optimal interpolation(DOI)method is a technique based on quasi-geostrophic dynamics for merging multi-satellite altimeter along-track observations to generate gridded absolute dynamic topography(ADT).Compared with the linear optimal interpolation(LOI)method,the DOI method can improve the accuracy of gridded ADT locally but with low computational efficiency.Consequently,considering both computational efficiency and accuracy,the DOI method is more suitable to be used only for regional applications.In this study,we propose to evaluate the suitable region for applying the DOI method based on the correlation between the absolute value of the Jacobian operator of the geostrophic stream function and the improvement achieved by the DOI method.After verifying the LOI and DOI methods,the suitable region was investigated in three typical areas:the Gulf Stream(25°N-50°N,55°W-80°W),the Japanese Kuroshio(25°N-45°N,135°E-155°E),and the South China Sea(5°N-25°N,100°E-125°E).We propose to use the DOI method only in regions outside the equatorial region and where the absolute value of the Jacobian operator of the geostrophic stream function is higher than1×10^(-11).
文摘This paper uses dynamic programming principle and network graph method to deal with optimal design for the reliability of a mechanical system considering production cost.
基金This work was supported in part by the National Natural Science Foundation of China under Grant 51277015,51677007 and 51977012.
文摘This paper studies the economic environmental energy-saving day-ahead scheduling problem of power systems considering wind generation(WG)and demand response(DR)by means of multi-objective dynamic optimal power flow(MDOPF).Within the model,fuel cost,carbon emission and active power losses are taken as objectives,and an integrated dispatch modeof conventional coal-fired generation,WG and DRis utilized.The corresponding solution process to the MDOPF is based on ahybrid of a non-dominated sorting genetic algorithm-II(NSGA-II)and fuwzy satisfaction-maximizing method,where NSGA-II obtains the Pareto frontier and the fuzzy satisfaction-maximizing method is the chosen strategy.Illustrative cases of different scenarios are performed based on an IEEE 6-units\,30-nodes system,to verify the proposed model and the solution process,as well as the benefits obtained by the DR into power system.
文摘Battery energy storage systems(BESS)are instrumental in the transition to a low carbon electrical network with enhanced flexibility,however,the set objective can be accomplished only through suitable scheduling of their operation.This paper develops a dynamic optimal power flow(DOPF)-based scheduling framework to optimize the day(s)-ahead operation of a grid-scale BESS aiming to mitigate the predicted limits on the renewable energy generation as well as smooth out the network demand to be supplied by conventional generators.In DOPF,all the generating units,including the ones that model the exports and imports of the BESS,across the entire network and the complete time horizon are integrated on to a single network.Subsequently,an AC-OPF is applied to dispatch their power outputs to minimize the total generation cost,while satisfying the power balance equations,and handling the unit and network constraints at each time step coupled with intertemporal constraints associated with the state of charge(SOC).Furthermore,the DOPF developed here entails the frequently applied constant current-constant voltage charging profile,which is represented in the SOC domain.Considering the practical application of a 1 MW BESS on a particular 33 kV network,the scheduling framework is designed to meet the pragmatic requirements of the optimum utilization of the available energy capacity of BESS in each cycle,while completing up to one cycle per day.
基金Project(2009AA04Z216) supported in part by the National High Technology Research and Development Program of ChinaProject(2009ZX04013-011) supported by the National Science and Technology Major Program of ChinaProject(20092302120068) supported by the Doctoral Program of Higher Education of China
文摘A design and optimization approach of dynamic and control performance for a two-DOF planar manipulator was proposed.After the kinematic and dynamic analysis,several advantages of the mechanism were illustrated,which made it possible to obtain good dynamic and control performances just through mechanism optimization.Based on the idea of design for control(DFC),a novel kind of multi-objective optimization model was proposed.There were three optimization objectives:the index of inertia,the index describing the dynamic coupling effects and the global condition number.Other indexes to characterize the designing requirements such as the velocity of end-effector,the workspace size,and the first mode natural frequency were regarded as the constraints.The cross-section area and length of the linkages were chosen as the design variables.NSGA-II algorithm was introduced to solve this complex multi-objective optimization problem.Additional criteria from engineering experience were incorporated into the selecting of final parameters among the obtained Pareto solution sets.Finally,experiments were performed to validate the linear dynamic structure and control performances of the optimized mechanisms.A new expression for measuring the dynamic coupling degree with clear physical meaning was proposed.The results show that the optimized mechanism has an approximate decoupled dynamics structure,and each active joint can be regarded as a linear SISO system.The control performances of the linear and nonlinear controllers were also compared.It can be concluded that the optimized mechanism can achieve good control performance only using a linear controller.
基金National Natural Science Foundation of China(No.61163009)。
文摘Wireless sensor networks are extremely vulnerable to various security threats.The intrusion detection method based on game theory can effectively balance the detection rate and energy consumption of the system.The accurate analysis of the attack behavior of malicious sensor nodes can help to configure intrusion detection system,reduce unnecessary system consumption and improve detection efficiency.However,the completely rational assumption of the traditional game model will cause the established model to be inconsistent with the actual attack and defense scenario.In order to formulate a reasonable and effective intrusion detection strategy,we introduce evolutionary game theory to establish an attack evolution game model based on optimal response dynamics,and then analyze the attack behavior of malicious sensor nodes.Theoretical analysis and simulation results show that the evolution trend of attacks is closely related to the number of malicious sensors in the network and the initial state of the strategy,and the attacker can set the initial strategy so that all malicious sensor nodes will eventually launch attacks.Our work is of great significance to guide the development of defense strategies for intrusion detection systems.
文摘Cloud computing has become an essential technology for the management and processing of large datasets,offering scalability,high availability,and fault tolerance.However,optimizing data replication across multiple data centers poses a significant challenge,especially when balancing opposing goals such as latency,storage costs,energy consumption,and network efficiency.This study introduces a novel Dynamic Optimization Algorithm called Dynamic Multi-Objective Gannet Optimization(DMGO),designed to enhance data replication efficiency in cloud environments.Unlike traditional static replication systems,DMGO adapts dynamically to variations in network conditions,system demand,and resource availability.The approach utilizes multi-objective optimization approaches to efficiently balance data access latency,storage efficiency,and operational costs.DMGO consistently evaluates data center performance and adjusts replication algorithms in real time to guarantee optimal system efficiency.Experimental evaluations conducted in a simulated cloud environment demonstrate that DMGO significantly outperforms conventional static algorithms,achieving faster data access,lower storage overhead,reduced energy consumption,and improved scalability.The proposed methodology offers a robust and adaptable solution for modern cloud systems,ensuring efficient resource consumption while maintaining high performance.
基金co-supported by the National Natural Science Foundation of China(No.62293495)the National Key Research and Development Program of China(No.2023YFB3306900)the Academic Excellence Foundation of BUAA for ph.D Students,China。
文摘Airborne pulse radar and communication systems are essential for precise detection and collision avoidance,ensuring that aircraft operate safely and efficiently.A major challenge in spectrum sharing is the allocation of resources in both the time and frequency domains,aiming to minimize inter-system interference as the available spectrum fluctuates over time.In this paper,regarding maximization of detection probability and spectrum utilization efficiency as two fundamental objectives,a novel Dynamic Spectrum and Power Allocation based on Genetic Algorithm(GA-DSPA)model is proposed,which dynamically allocates communication channel frequency and power under the constraints of pulse radar detection probability and signal-to-interferenceplus-noise ratio of communication.To solve this bi-objective model,a non-dominated sortingbased multi-objective genetic algorithm is developed.A novel environment perception strategy and offspring sorting technique based on radar echoes are integrated into the optimization framework.Simulation results indicate that by integrating environmental monitoring mechanisms and dynamic adaptation strategies,the proposed method effectively tracks the evolving Paretooptimal Fronts(Po Fs),thereby ensuring optimal performance for both co-located pulse radar and communication systems.Hardware test results confirm that within the GA-DSPA framework,the pulse radar achieves higher detection probabilities under identical conditions,while the communication system realizes increased average throughput.
基金supported by the National Natural Science Foundation of China(62376290).
文摘This work presents a nonlinear integral-ameliorated model for handling dynamic optimization problems with affine constraints.They pose a challenge as their optimal solutions evolve with time.Traditional iteration-based methods that exactly solve the problem at each time instant,fail to precisely and realtime track the solution due to computational and communication bottlenecks.Our model,through rigorous theoretical analyses,is able to reduce the optimality gap(i.e.,the difference between the model state and optimal solution)to zero in a finite time,and thus,track the solution online.Besides,perturbance is taken into account.We prove that under certain conditions,our model can totally tolerate an important kind of noise that we call“errorrelated noise”.In numerical experiments,compared with six existing methods,our model exhibits superior robustness when contaminated by the error-related noise.The key techniques in the model design involve employing the zeroing neural network to leverage time-derivative information,and introducing an integral term as well as the class C_(L)^(0)functions to enhance convergence and noise resistance.Finally,we establish a model-free control framework for a surgical manipulator with the remote-center-of-motion constraint and compare the performances of the framework based on different models in simulations.The results indicate that our model achieves the best performance among various models employed within the framework.
基金fundings supported by Sichuan Science and Technology Program(2025YFHZ0065).
文摘Structural Reliability-Based Topology Optimization(RBTO),as an efficient design methodology,serves as a crucial means to ensure the development ofmodern engineering structures towards high performance,long service life,and high reliability.However,in practical design processes,topology optimization must not only account for the static performance of structures but also consider the impacts of various responses and uncertainties under complex dynamic conditions,which traditional methods often struggle accommodate.Therefore,this study proposes an RBTO framework based on a Kriging-assisted level set function and a novel Dynamic Hybrid Particle Swarm Optimization(DHPSO)algorithm.By leveraging the Kriging model as a surrogate,the high cost associated with repeatedly running finite element analysis processes is reduced,addressing the issue of minimizing structural compliance.Meanwhile,the DHPSO algorithm enables a better balance between the population’s developmental and exploratory capabilities,significantly accelerating convergence speed and enhancing global convergence performance.Finally,the proposed method is validated through three different structural examples,demonstrating its superior performance.Observed that the computational that,compared to the traditional Solid Isotropic Material with Penalization(SIMP)method,the proposed approach reduces the upper bound of structural compliance by approximately 30%.Additionally,the optimized results exhibit clear material interfaces without grayscale elements,and the stress concentration factor is reduced by approximately 42%.Consequently,the computational results fromdifferent examples verify the effectiveness and superiority of this study across various fields,achieving the goal of providing more precise optimization results within a shorter timeframe.
基金Supported by the National Key Basic Research Program of China("973"Project)(2009CB724401)the China Postdoctoral Science Foundation(20070420208)the Postdoctoral Innovation Foundation of Shandong Province(200702023)~~
文摘Considering the self-excited and forced vibrations in high-speed milling processes, a novel method for dynamic optimization of system stability is used to determine the cutting parameters and structural parameters by increasing the chatter free material removal rate （CF-MRR） and surface finish. The method is hased on the theory of the chatter stability and the semi-bandwidth of the resonant region. The objective function of the method is material removal rate（MRR）,the constraints are chatter stability and surface finish, and the optimizing variables are cutting and structural parameters. The optimization procedure is stated. The method is applied to a milling system and CF-MRR is increased 18.86%. It is shown that the influences of the chatter stability and the resonance are simultaneously considered in the dynamic optimization of the milling system for increasing CF-MRR and the surface finish.
文摘Aiming at the problems in current cam profile optimization processes, such as simple dynamics models, limited geometric accuracy and low design automatization level, a new dynamic optimization mode is put forward. Based on the parameterization modeling technique of MSC. ADAMS platform, the different steps in current mode are reorganized, thus obtaining an upgraded mode called the ＂parameterized-prototype-based cam profile dynamic optimization mode＂. A parameterized prototype（PP） of valve mechanism is constructed in the course of dynamic optimization for cam profiles. Practically, by utilizing PP and considering the flexibility of the parts in valve mechanism, geometric accuracy and design automatization are improved.
文摘This article presents an adaptive intelligent control strategy applied to a lumped-parameter evaporator model,i.e.,a simplified dynamic representation treating the evaporator as a single thermal node with uniform temperature distribution,suitable for control design due to its balance between physical fidelity and computational simplicity.The controller uses a wavelet-based neural proportional,integral,derivative(PID)controller with IIR filtering(infinite impulse response).The dynamic model captures the essential heat and mass transfer phenomena through a nonlinear energy balance,where the cooling capacity“Qevap”is expressed as a non-linear function of the compressor frequency and the temperature difference,specifically,Q_(evap)=k_(1)u(T_(in)−T_(e))with u as compressor frequency,Te evaporator temperature,and Tin inlet fluid temperature.The operating conditions of the system,in general terms,focus on the following variables,the overall thermal capacity is 1000 J/K,typical for small-capacity heat exchangers,The mass flow is 0.05 kg/s,typical for secondary liquid cooling circuits,the overall loss coefficient of 50 W/K that corresponds to small evaporators with partial insulation,the temperatures(inlet)of 10℃and the temperature of environment of 25℃,thermal load of 200 W that corresponds to a small-scaled air conditioning applications.To handle system nonlinearities and improve control performance,aMorlet wavelet-based neural network(Wavenet)is used to dynamically adjust the PID gains online.An IIR filter is incorporated to smooth the adaptive gains,improving stability and reducing oscillations.In contrast to prior wavelet-or neural-adaptive PID controllers in HVAC applications,which typically adjust gains without explicit filtering or not tailored to evaporator dynamics,this work introduces the first PID–Wavenet scheme augmented with an IIR-based stabilization layer,specifically designed to address the combined challenges of nonlinear evaporator behavior,gain oscillation,and real-time implementability.The proposed controller(PID-Wavenet+IIR)is implemented and validated inMATLAB/Simulink,demonstrating superior performance compared to a conventional PID tuned using Simulink’s auto-tuning function.Key results include a reduction in settling time from 13.3 to 8.2 s,a reduction in overshoot from 3.5%to 0.8%,a reduction in steady-state error from 0.12℃ to 0.02℃and a 13%reduction in energy overall consumption.The controller also exhibits greater robustness and adaptability under varying thermal loads.This explicit integration of wavelet-driven adaptation with IIR-filtered gain shaping constitutes the main methodological contribution and novelty of the work.These findings validate the effectiveness of the wavelet-based adaptive approach for advanced thermal management in refrigeration and HVAC systems,with potential applications in controlling variable-speed compressors,liquid chillers,and compact cooling units.
基金supported by the Fundamental Research Funds for the Central Universities of China(FRF-TP-24-058A)with additional support from the National Key Laboratory of Helicopter Aeromechanics(2024-ZSJ-LB-02-02).
文摘Considering the impact of terminal impact time constraints and the state information of maneuvering targets on the guidance accuracy in multi-UAV cooperative guidance,this paper proposes an impact time cooperative control guidance law(ITCCG)that combines the optimal error dynamics with an improved adaptive cubature Kalman filter(IACKF)algorithm.First,a terminal impact time feedback term is introduced into proportional navigation guidance based on the relative virtual guidance model,and terminal time control is achieved through optimal error dynamics.Then,the Huber loss function is used to reduce the impact of measurement outliers,and the diagonal decomposition is applied to address the issue of non-positive definite matrices that cannot undergo Cholesky decomposition.Finally,the ITCCG and IACKF algorithms combined achieve multi-UAV time-cooperated guidance based on maneuvering target state estimation.Simulation results show that the proposed algorithm effectively reduces the target state estimation error and achieves cooperative guidance within the desired time frame.
基金the National Key Research and Development Program of China(Nos.2020YFF0218004 and 2020YFF0218003)the National Natural Science Foundation of China(No.52105074)。
文摘Autonomous excavation operation is a major trend in the development of a new generation of intelligent tunnel boring machines(TBMs).However,existing technologies are limited to supervised machine learning and static optimization,which cannot outperform human operation and deal with ever changing geological conditions and the long-term performance measure.The aim of this study is to resolve the problem of dynamic optimization of the shield excavation performance,as well as to achieve autonomous optimal excavation.In this study,a novel autonomous optimal excavation approach that integrates deep reinforcement learning and optimal control is proposed for shield machines.Based on a first-principles analysis of the machine-ground interaction dynamics of the excavation process,a deep neural network model is developed using construction field data consisting of 1.1 million samples.The multi-system coupling mechanism is revealed by establishing an overall system model.Based on the overall system analysis,the autonomous optimal excavation problem is decomposed into a multi-objective dynamic optimization problem and an optimal control problem.Subsequently,a dimensionless multi-objective comprehensive excavation performance measure is proposed.A deep reinforcement learning method is used to solve for the optimal action sequence trajectory,and optimal closed-loop feedback controllers are designed to achieve accurate execution.The performance of the proposed approach is compared to that of human operation by using the construction field data.The simulation results show that the proposed approach not only has the potential to replace human operation but also can significantly improve the comprehensive excavation performance.
基金This work was supported by UK EPSRC(No.EP/E060722/01)Broil FAPESP(Proc.04/04289-6).
文摘Dynamic optimization problems are a kind of optimization problems that involve changes over time. They pose a serious challenge to traditional optimization methods as well as conventional genetic algorithms since the goal is no longer to search for the optimal solution（s） of a fixed problem but to track the moving optimum over time. Dynamic optimization problems have attracted a growing interest from the genetic algorithm community in recent years. Several approaches have been developed to enhance the performance of genetic algorithms in dynamic environments. One approach is to maintain the diversity of the population via random immigrants. This paper proposes a hybrid immigrants scheme that combines the concepts of elitism, dualism and random immigrants for genetic algorithms to address dynamic optimization problems. In this hybrid scheme, the best individual, i.e., the elite, from the previous generation and its dual individual are retrieved as the bases to create immigrants via traditional mutation scheme. These elitism-based and dualism-based immigrants together with some random immigrants are substituted into the current population, replacing the worst individuals in the population. These three kinds of immigrants aim to address environmental changes of slight, medium and significant degrees respectively and hence efficiently adapt genetic algorithms to dynamic environments that are subject to different severities of changes. Based on a series of systematically constructed dynamic test problems, experiments are carried out to investigate the performance of genetic algorithms with the hybrid immigrants scheme and traditional random immigrants scheme. Experimental results validate the efficiency of the proposed hybrid immigrants scheme for improving the performance of genetic algorithms in dynamic environments.
基金Project(2013CB733600) supported by the National Basic Research Program of ChinaProject(21176073) supported by the National Natural Science Foundation of China+2 种基金Project(20090074110005) supported by Doctoral Fund of Ministry of Education of ChinaProject(NCET-09-0346) supported by Program for New Century Excellent Talents in University of ChinaProject(09SG29) supported by "Shu Guang", China
文摘To solve dynamic optimization problem of chemical process (CPDOP), a hybrid differential evolution algorithm, which is integrated with Alopex and named as Alopex-DE, was proposed. In Alopex-DE, each original individual has its own symbiotic individual, which consists of control parameters. Differential evolution operator is applied for the original individuals to search the global optimization solution. Alopex algorithm is used to co-evolve the symbiotic individuals during the original individual evolution and enhance the fitness of the original individuals. Thus, control parameters are self-adaptively adjusted by Alopex to obtain the real-time optimum values for the original population. To illustrate the whole performance of Alopex-DE, several varietal DEs were applied to optimize 13 benchmark functions. The results show that the whole performance of Alopex-DE is the best. Further, Alopex-DE was applied to solve 4 typical CPDOPs, and the effect of the discrete time degree on the optimization solution was analyzed. The satisfactory result is obtained.
基金supported by National Natural Science Foundation of China (Grant No. 50605041, No. 50775125)National Basic Research Program of China (973 Program, Grant No. 2006CB705400)
文摘The dynamic dexterity is an important issue for manipulator design, some indices were proposed for analyzing dynamic dexterity, but they can evaluate the dynamic performance just at one pose in the workspaee of the manipulator, and can＇t be applied to dynamic design expediently. Much work has been done in the kinematic optimization, but the work in the dynamic optimization is much less. A global dynamic condition number index is proposed and applied to the dynamic optimization design the parallel manipulator. This paper deals with the dynamic manipulability and dynamic optimization of a two degree-of-freedom （DOF） parallel manipulator. The particular velocity and particular angular velocity matrices of each moving part about the part＇s pivot point are derived fi＇om the kinematic formulation of the manipulator, and the inertial force and inertial movement are obtained utilizing Newton-Euler formulation, then the inverse dynamic model of the parallel manipulator is proposed based on the virtual work principle. The general inertial ellipsoid and dynamic manipulability ellipsoid are applied to evaluate the dynamic performance of the manipulator, a global dynamic condition number index based on the condition number of general inertial matrix in the workspace is proposed, and then the link lengths of the manipulator is redesigned to optimize the dynamic manipulability by this index. The dynamic manipulability of the origin mechanism and the optimized mechanism are compared, the result shows that the optimized one is much better. The global dynamic condition number index has good effect in evaluating the dynamic dexterity of the whole workspace, and is efficient in the dynamic optimal design of the parallel manipulator.
基金Supported by Major State Basic Research Development Program of China （2012CB720500）, National Natural Science Foundation of China （Key Program： Ul162202）, National Science Fund for Outstanding Young Scholars （61222303）, National Natural Science Foundation of China （21276078, 21206037） and the Fundamental Research Funds for the Central Universities.
文摘The solutions of dynamic optimization problems are usually very difficult due to their highly nonlinear and multidimensional nature. 13enetic algorithm （GA） has been proved to be a teasibte method when the gradient is difficult to calculate. Its advantage is that the control profiles at all time stages are optimized simultaneously, but its convergence is very slow in the later period of evolution and it is easily trapped in the local optimum. In this study, a hybrid improved genetic algorithm （HIGA） for solving dynamic optimization problems is proposed to overcome these defects. Simplex method （SM） is used to perform the local search in the neighborhood of the optimal solution. By using SM, the ideal searching direction of global optimal solution could be found as soon as possible and the convergence speed of the algorithm is improved. The hybrid algorithm presents some improvements, such as protecting the best individual, accepting immigrations, as well as employing adaptive crossover and Ganssian mutation operators. The efficiency of the proposed algorithm is demonstrated by solving several dynamic optimization problems. At last, HIGA is applied to the optimal production of secreted protein in a fed batch reactor and the optimal feed-rate found by HIGA is effective and relatively stable.
文摘This paper proposes a new three-dimensional optimal guidance law for impact time control with seeker’s Field-of-View(FOV) constraint to intercept a stationary target. The proposed guidance law is devised in conjunction with the concept of biased Proportional Navigation Guidance(PNG). The guidance law developed leverages a nonlinear function to ensure the boundedness of velocity lead angle to cater to the seeker’s FOV limit. It is proven that the impact time error is nullified in a finite-time under the proposed method. Additionally, the optimality of the biased command is theoretically analyzed. Numerical simulations confirm the superiority of the proposed method and validate the analytic findings.
