Controllable shock wave fracturing is an innovative engineering technique used for shale reservoir fracturing and reformation.Understanding the anisotropic fracture mechanism of shale under impact loading is vital for...Controllable shock wave fracturing is an innovative engineering technique used for shale reservoir fracturing and reformation.Understanding the anisotropic fracture mechanism of shale under impact loading is vital for optimizing shock wave fracturing equipment and enhancing shale oil production.In this study,using the well-known notched semi-circular bend(NSCB)sample and the novel double-edge notched flattened Brazilian disc(DNFBD)sample combined with a split Hopkinson pressure bar(SHPB),various dynamic anisotropic fracture properties of Lushan shale,including failure characteristics,fracture toughness,energy dissipation and crack propagation velocity,are comprehensively compared and discussed under mode Ⅰ and mode Ⅱ fracture scenarios.First,using a newly modified fracture criterion considering the strength anisotropy of shale,the DNFBD specimen is predicted to be a robust method for true mode Ⅱ fracture of anisotropic shale rocks.Our experimental results show that the dynamic mode Ⅱ fracture of shale induces a rougher and more complex fracture morphology and performs a higher fracture toughness or fracture energy compared to dynamic mode Ⅰ fracture.The minimal fracture toughness or fracture energy occurs in the Short-transverse orientation,while the maximal ones occur in the Divider orientation.In addition,it is interesting to find that the mode Ⅱ fracture toughness anisotropy index decreases more slowly than that in the mode Ⅰ fracture scenario.These results provide significant insights for understanding the different dynamic fracture mechanisms of anisotropic shale rocks under impact loading and have some beneficial implications for the controllable shock wave fracturing technique.展开更多
To address the key scientific challenge of monitoring the dynamic fracturing of surrounding rock in deep roadways,this study systematically investigates the quantitative relationship between stress and charge signals ...To address the key scientific challenge of monitoring the dynamic fracturing of surrounding rock in deep roadways,this study systematically investigates the quantitative relationship between stress and charge signals during coal mass loading.By integrating innovative analytical approaches,introducing quantitative evaluation indices,and developing a charge–stress inversion model,and incorporating underground monitoring practices,significant progress has been achieved in elucidating the correlation between stress variations and charge signals throughout the entire coal mass fracturing process.First,in the field of stress–charge correlation analysis,empirical mode decomposition(EMD)was combined with wavelet coherence analysis for the first time,enabling the removal of slow-varying stress trends while retaining high-frequency fluctuations.This approach allowed for the quantitative characterization of the evolution of coherence between stress variations and charge fluctuations across multiple time scales.Second,coherence skewness and the proportion of high-coherence intervals were innovatively introduced to examine the influence of time scale selection on correlation results.On this basis,a criterion for determining the near-optimal observation scale of charge signals was proposed,providing a quantitative reference for time scale selection in similar signal analyses.Finally,by correlating charge signals with coal damage factors and stress states,a charge-based damage evolution equation was established to achieve effective stress inversion.Combined with in situ monitoring of stress and charge in roadway surrounding rock,this approach revealed the correlation characteristics of stress and charge intensity responses during the dynamic fracturing process.The results indicate,first,that charge signals are not significantly correlated with the absolute stress level of coal but are directly associated with stress variations following coal damage and failure,with the amplitude of charge fluctuations increasing alongside stress fluctuations.Second,coherence between stress and charge signals varies markedly across time scales,with excessively small or large scales leading to distortion,and the scale corresponding to the peak proportion of intervals with coherence>0.8 was identified as the near-optimal observation scale.Third,charge signals can effectively characterize coal damage factors,and the established damage evolution equation can effectively invert stress variation trends.Fourth,in underground roadways,zones of dynamic fracturing in surrounding rock are commonly located in areas where stress concentration overlaps with regions of high charge intensity,further confirming the strong consistency between charge and stress variations.These findings improve the theoretical framework of charge signal responses in loaded coal and provide a scientific basis for precise“stress-charge”monitoring of dynamic disasters,offering practical potential for engineering applications.展开更多
This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior...This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.展开更多
The shape of underground chambers in deep mining varies due to their geological environment and intended use,which results in different failure modes under the influence of mining activities.However,the effect of cham...The shape of underground chambers in deep mining varies due to their geological environment and intended use,which results in different failure modes under the influence of mining activities.However,the effect of chamber shape on the mechanism of structural integrity under dynamic load is still unclear.In this paper,granite samples with circular(C),rectangular(R),long ellipse(EL),and short ellipse(ES)holes were prepared.The dynamic mechanical response and cracking mechanism of granite were systematically analyzed using the split Hopkinson pressure bar(SHPB)test system and the hybrid finite and discrete element method(HFDEM).The results indicate that the dynamic strengths of granite with EL and ES represent the maximum and minimum values within the range of close strain rates,respectively.When EL granite is subjected to dynamic load,the axial stress concentration(in the load direction)is weak,and the transverse stress shows relative dispersion,which is the primary reason for its highest dynamic strength.The failure of granite with various holes primarily involves a tensile-shear mixed fracture,with relatively few pure typeⅡcracks.The chamber’s transverse span is the primary factor influencing the distribution range of the fracture area.展开更多
The safe and efficient development of geothermal energy is a key driver of the energy revolution and environmental governance in this century.To understand the effect of water driving pressure on drilling safety and h...The safe and efficient development of geothermal energy is a key driver of the energy revolution and environmental governance in this century.To understand the effect of water driving pressure on drilling safety and hydraulic fracturing efficiency during the development of geothermal energy under varying reservoir temperatures,dynamic compression tests were conducted on granite samples subjected to thermal treatment(25,100,200,300,400 and 600℃)and subsequent forced water absorption(0,4,8,12 MPa)using a split Hopkinson pressure bar system.The results indicate that a higher water driving pressure exacerbates the deterioration of dynamic compressive strength with increasing temperature,while it enhances the rate dependence of dynamic compressive strength,except at 600℃.The dynamic increase factor(DIF)of dynamic compressive strength vs.strain rate is determined by both temperature and water driving pressure.A prediction model for the deterioration of dynamic compressive strength considering reservoir temperature and water driving pressure is proposed for geothermal reservoirs.While the splitting failure of samples remains unchanged,crack density increases with increasing temperature and water driving pressure,exhibiting multiscale failure cracks parallel to the loading direction.The structure effective strength model,the wing-crack propagation model,the effect of pore water pressure on dynamic stress intensity factor,and the dynamic response of forced absorbed water can collectively reveal the response mechanisms of dynamic strength.Based on the experimental findings,implications for safe and productive geothermal energy development are discussed,with particular attention to the effect of drilling fluid leakage on wellbore stability and the impact of residual fracturing fluid after backflow on repeated fracturing.This study has important reference value for understanding dynamic wellbore stability under drilling disturbance loads and for the design of repeated dynamic hydraulic fracturing schemes in geothermal energy development.展开更多
The dynamic fracture behaviors of Ti-6Al-4V alloy at high strain rate loading were investigated systemically through Taylor impact test, over the range of impact velocities from 145 m/s to 306 m/s. The critical impact...The dynamic fracture behaviors of Ti-6Al-4V alloy at high strain rate loading were investigated systemically through Taylor impact test, over the range of impact velocities from 145 m/s to 306 m/s. The critical impact velocity of fracture ranges from 217 m/s to 236 m/s. Smooth surfaces and ductile dimple areas were observed on the fracture surfaces. As the impact velocity reached 260 m/s, the serious melting regions were also observed on the fracture surfaces. Self-organization of cracks emerges when the impact velocity reaches 260 m/s, while some special cracks whose ＂tips＂ are not sharp but arc and smooth, and without any evidence of deformation or adiabatic shear band were also observed on the impact end surfaces. Examination of the sections of these special cracks reveals that the cracks expand along the two maximum shear stress directions respectively, and finally intersect as a tridimensional ＂stagger ridge＂ structure.展开更多
The reflected optical caustics method is applied to study dynamic fracture problems in hardened cement paste. First both the unreinforced cement paste and the glass fibres reinforced cement paste specimens were fabric...The reflected optical caustics method is applied to study dynamic fracture problems in hardened cement paste. First both the unreinforced cement paste and the glass fibres reinforced cement paste specimens were fabricated and the reflective coating on the surface of the specimen was prepared. Secondly the crack path and the shadow spot patterns during the crack propagation process for the two specimens were recorded by using a multi-spark high speed camera.Thirdly some dynamic parameters of two cement paste specimens including crack onset time the dynamic stress intensity factor and crack growth velocity were determined and analyzed comparatively.This indicates that the glass fibres can improve the fracture resistance and delay fracture time.These results will play an important role in evaluating the dynamic fracture properties of cement paste.展开更多
An effective Dynamic Moire method was presented to determine the critical time of crack instable propagation in rock dynamic fracture. Two pieces of grating were installed near the notch of Short Rod specimen to form ...An effective Dynamic Moire method was presented to determine the critical time of crack instable propagation in rock dynamic fracture. Two pieces of grating were installed near the notch of Short Rod specimen to form the Moire fringes, then the COD versus time could be monitored from the movement of the Moire fringes, and finally the critical time could be determined from the velocity of COD. This method was also compared with another one.It could be concluded that the critical time determined by Dynamic Moire method corresponds with that of the Transmitted Wave method at the loading rates from 103 to 104 MPa·m(1/2)·S(-1).展开更多
This study presents a meso-criterion of dynamic fracture, on the basis of stress in integral form In such way the difficulty due to the singularity of stress distribution at the crack tip is overcome. A micro-paramete...This study presents a meso-criterion of dynamic fracture, on the basis of stress in integral form In such way the difficulty due to the singularity of stress distribution at the crack tip is overcome. A micro-parameter, the atom radius, is introduced into the criterion.Meanwhile a characteristic time concept is taken into account for describing the inertia effect of material. The criterion reveals The criterion reveals the effects of loading rate, defect and sample geometry,material constants including the micro-structure parameter.展开更多
The fracture behaviour and crack propagation features of coal under coupled static-dynamic loading conditions are important when evaluating the dynamic failure of coal.In this study,coupled static-dynamic loading test...The fracture behaviour and crack propagation features of coal under coupled static-dynamic loading conditions are important when evaluating the dynamic failure of coal.In this study,coupled static-dynamic loading tests are conducted on Brazilian disc(BD)coal specimens using a modified split Hopkinson pressure bar(SHPB).The effects of the static axial pre-stress and loading rate on the dynamic tensile strength and crack propagation characteristics of BD coal specimens are studied.The average dynamic indirect tensile strength of coal specimens increases first and then decreases with the static axial pre-stress increasing.When no static axial pre-stress is applied,or the static axial pre-stress is 30%of the static tensile strength,the dynamic indirect tensile strength of coal specimens shows an increase trend as the loading rate increases.When the static axial pre-stress is 60%of the static tensile strength,the dynamic indirect tensile strength shows a fluctuant trend as the loading rate increases.According to the crack propagation process of coal specimens recorded by high-speed camera,the impact velocity influences the mode of crack propagation,while the static axial pre-stress influences the direction of crack propagation.The failure of coal specimens is a coupled tensile-shear failure under high impact velocity.When there is no static axial pre-stress,tensile cracks occur in the vertical loading direction.When the static axial pre-stress is applied,the number of cracks perpendicular to the loading direction decreases,and more cracks occur in the parallel loading direction.展开更多
The characterization and testing methods of the dynamic fractureinitiation toughness of elas- tic-plastic materials under tensileimpact are studied. By using the self-designed bar-bar tensile impactappa- ratus, a nove...The characterization and testing methods of the dynamic fractureinitiation toughness of elas- tic-plastic materials under tensileimpact are studied. By using the self-designed bar-bar tensile impactappa- ratus, a novel test method for studying dynamicfracture-initiation ahs been proposed based on the one-di- mensionaltest principle. The curve of average load v. s. displacement (P-δ)is smooth until unstable crack propagation, and the kinetic energywhich does not contribute to the crack growth can be removed fromtotal work done by external-force to the specimen.展开更多
To investigate the influence of loading rate and high temperature on the dynamic fracture toughness of rock,dynamic fracture tests were carried out on notched semi-circular bend specimens under four temperature condit...To investigate the influence of loading rate and high temperature on the dynamic fracture toughness of rock,dynamic fracture tests were carried out on notched semi-circular bend specimens under four temperature conditions based on the split Hopkinson pressure bar system.Experimental and analytical methods were applied to investigating the effect of temperature gradient on the stress waves.A high-speed camera was used to check the fracture characteristics of the specimens.The results demonstrate that the temperature gradient on the bars will not significantly distort the shape of the stress wave.The dynamic force balance is achieved even when the specimens are at a temperature of 400°C.The dynamic fracture toughness linearly develops with the increase of loading rate within the temperature range of 25-400°C,and high temperature has a strengthening effect on the dynamic fracture toughness.展开更多
In this paper,the dynamic propagation problem of a mixed-mode crack was studied by means of the experimental method of caustics.The initial curve and caustic equations were derived un- der the mixed-mode dynamic condi...In this paper,the dynamic propagation problem of a mixed-mode crack was studied by means of the experimental method of caustics.The initial curve and caustic equations were derived un- der the mixed-mode dynamic condition.A multi-point measurement method for determining the dy- namic stress intensity factors,K_Ⅰ~d and K_Ⅱ~d,and the position of the crack tip was developed.Several other methods were adopted to check this method,and showed that it has a good precision.Finally, the dynamic propagating process of a mixed-mode crack in a three-point bending beam specimen was investigated with our method.展开更多
Cyclic freezing-thawing can lead to fracture development in coal,affecting its mechanical and consumer properties.To study crack formations in coal,an ultrasonic sounding method using shear polarized waves was propose...Cyclic freezing-thawing can lead to fracture development in coal,affecting its mechanical and consumer properties.To study crack formations in coal,an ultrasonic sounding method using shear polarized waves was proposed.Samples of three coal types(anthracite,lignite and hard coal)were tested.The research results show that,in contrast to the shear wave velocity,the shear wave amplitude is extremely sensitive to the formation of new cracks at the early stages of cyclic freezing-thawing.Tests also show an inverse correlation between coal compressive strength and its tendency to form cracks under temperature impacts;shear wave attenuation increases more sharply in high-rank coals after the first freezing cycle.Spectral analysis of the received signals also confirmed significant crack formation in anthracite after the first freeze-thaw cycle.The initial anisotropy was determined,and its decrease with an increase in the number of freeze-thaw cycles was shown.The data obtained forms an experimental basis for the development of new approaches to preserve coal consumer properties during storage and transportation under severe natural and climatic conditions.展开更多
Fractional differential constitutive relationships are introduced to depict the history of dynamic stress inten- sity factors （DSIFs） for a semi-infinite crack in infinite viscoelastic material subjected to anti-pla...Fractional differential constitutive relationships are introduced to depict the history of dynamic stress inten- sity factors （DSIFs） for a semi-infinite crack in infinite viscoelastic material subjected to anti-plane shear impact load. The basic equations which govern the anti-plane deformation behavior are converted to a fractional wave-like equation. By utilizing Laplace and Fourier integral transforms, the fractional wave-like equation is cast into an ordinary differential equation （ODE）. The unknown function in the solution of ODE is obtained by applying Fourier transform directly to the boundary conditions of fractional wave-like equation in Laplace domain instead of solving dual integral equations. Analytical solutions of DSIFs in Laplace domain are derived by Wiener-Hopf technique and the numerical solutions of DSIFs in time domain are obtained by Talbot algorithm. The effects of four parameters α, β, b1, b2 of the fractional dif- ferential constitutive model on DSIFs are discussed. The numerical results show that the present fractional differential constitutive model can well describe the behavior of DSIFs of anti-plane fracture in viscoelastic materials, and the model is also compatible with solutions of DSIFs of anti-plane fracture in elastic materials.展开更多
A novel method was proposed for the evaluation of Mode I dynamic fracture toughness （DFT） under plane stress and small scale yielding conditions for welded joints of stainless steel （SS）, 0Cr18Ni10Ti. In a hybrid ...A novel method was proposed for the evaluation of Mode I dynamic fracture toughness （DFT） under plane stress and small scale yielding conditions for welded joints of stainless steel （SS）, 0Cr18Ni10Ti. In a hybrid experimental-numerical approach, the experiments were carried out on the Hopkinson pressure bar apparatus, and three dimensional （3D） transient numerical simulations were performed by a finite element （FE） computer program. Macroscopical plastic deformation was observed at the loading and supporting points, on the specimens, after the test, which could cause a large error if omitted in the numerical simulation. Therefore, elustic-viscoplustic analysis was performed on the specimen by adopting the Johnson-Cook （J-C） model to describe the rate-dependent plastic flow behavior of the material. The material heterogeneity in the mismatched welded joints, induced by the difference in the base metal （BM） and the weld metal （WM） in yield stress, has also been taken into consideration by using the J-C models separately. Good accordance was obtained between the experimental and the computational results by the present approach. The relationship between plane stress DFT and loading rate was also obtained on the order of 108 MPa.m^1/2.s^-1.展开更多
Rock masses in high-elevation or cold regions are vulnerable to the combined effects of freeze-thaw(F-T)weathering and dynamic mixed-mode loading,posing a serious threaten to the safety and stability of geotechnical e...Rock masses in high-elevation or cold regions are vulnerable to the combined effects of freeze-thaw(F-T)weathering and dynamic mixed-mode loading,posing a serious threaten to the safety and stability of geotechnical engineering.In this study,a series of dynamic fracture tests were conducted on notched semi-circular bend(NSCB)granite specimens subjected to different mixed-mode loading and F-T cycles using a split Hopkinson pressure bar(SHPB)test system.The effects of F-T treatment and dynamic mixed-mode loading on the fracture properties of granite,including effective fracture toughness,progressive fracture process,and macroscopic morphology of fracture surface,were comprehensively revealed.The experimental results suggest that the dynamic effective fracture toughness of NSCB specimens is dependent on the loading rate,particularly when the mode I loading is dominant.Additionally,the fracture toughness decreases as the number of F-T cycles increases,with an inflection point at 30 F-T cycles.All granite specimens subjected to mixed-mode loading exhibit a curved fracture path,with faster crack propagation speed and more fine cracks in specimens exposed to higher F-T cycles.Macroscopic morphology of fracture surface obtained using three-dimensional(3D)scanning indicates that the fractal dimension of the fracture surface increases with increasing F-T cycles,and the increment is more pronounced for specimens subjected to a higher mode II loading component.Moreover,this study compared the fracture resistance of F-T treated granite subjected to dynamic mixed loading using the maximum tangential stress(MTS)criterion and the generalized maximum tangential stress-based semi-analytical(SA-GMTS)criterion.Compared with the MTS criterion,the SA-GMTS criterion shows a more reasonable consistency with the experimental results,with a root mean square error within±7%.展开更多
The armour grade quenched and tempered steel joints fabricated using low hydrogen ferritic steel （LHF） filler exhibited superior joint efficiency owing to preferential ferrite microstructure in the welds and also th...The armour grade quenched and tempered steel joints fabricated using low hydrogen ferritic steel （LHF） filler exhibited superior joint efficiency owing to preferential ferrite microstructure in the welds and also they offered required resistance to HIC. However, the combat vehicles used in military operations will be required to operate under a wide range of road conditions ranging from first class to cross country. Structural components in combat vehicles are subjected to dynamic loading with high strain rates during operation. Stress loadings within the vehicle hull of these vehicles are expected to fluctuate considerably and structural cracking especially in welds during the service life of these vehicles can lead to catastrophic failures. Under these conditions, fracture behaviour of high strain rate sensitive structural steels can be better understood by dynamic fracture toughness （K1d）. Hence, an attempt was made to study dynamic fracture toughness of the armour grade quenched and tempered steel and their welds fabricated using LHF consumables. The experimental results indicate that the K1d values of the joints fabricated by shielded metal arc welding （SMAW） are higher than those of the joints fabricated using flux cored arc welding （FCAW） process.展开更多
The purpose of this work is to investigate the dynamic fracture properties of glassy polycarbonate （PC） with different aging times. The optical method of caustics is adopted in which the shadow spot patterns are rec...The purpose of this work is to investigate the dynamic fracture properties of glassy polycarbonate （PC） with different aging times. The optical method of caustics is adopted in which the shadow spot patterns are recorded by a high speed camera during the dynamic fracture process. Then, the dynamic crack propagation, the stress intensity factor （SIF） and the dynamic fracture toughness of aged PC are obtained through an analysis of the characteristic size of caustic pattern. Moreover, by combining with the investigation of the fracture surface and the energy release rate analysis, the influence of aging time on the dynamic fracture behavior is discussed. Results show that the dynamic fracture toughness and critical energy release rate of PC decreases with aging time for short aging times, whereas they have little change or even increase for longer aging times. Therefore, aging modifies the mechanical properties especially the dynamic fracture properties of PC nonlinearly, not linearly as generally thought of.展开更多
In this study,a novel testing method is proposed to characterize the dynamic shear property and failure mechanism of rocks by introducing the short beam compression(SBC)specimen into the split Hopkinson pressure bar(S...In this study,a novel testing method is proposed to characterize the dynamic shear property and failure mechanism of rocks by introducing the short beam compression(SBC)specimen into the split Hopkinson pressure bar(SHPB)system.Firstly,the stress distribution of SBC specimen is comprehensively analyzed by finite element method(FEM),and the results show that the optimal notch separation ratio of SBC specimen is C/H?0.2 to achieve successful dynamic simple-shear tests.Then,dynamic shear tests are conducted on sandstone using the SBC-SHPB method.Via careful pulse shaping technique,the dynamic force balance is guaranteed for SBC specimens,and the testing results show that the dynamic shear strength of sandstone is significantly rate-dependent.Combining the results of dynamic compression and tension tests,the failure envelopes of sandstone under different loading rates are obtained in the principle stress plane.It is found that the failure envelope of sandstone constantly expands outwards with increasing loading rate.Moreover,the energy partition of SBC specimen is quantified by virtue of high-speed digital image correlation(DIC)technique.The results show that the kinetic energy portion is non-negligible,and the shear fracture energy increases with increasing loading rate.In addition,the microscopic shear cracking mechanism of SBC specimen is analyzed by the thin section observation:the intra-granular(TG)fracture of minerals dominates the dynamic shear failure of sandstone,and the portion of TG fracture increases with increasing loading rate.This study provides a convenient and reliable method to investigate the dynamic shear property and failure mechanism of rocks.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.12302500)the National Key Research and Development Program of China(Grant No.2020YFA0710503)Postdoctoral Fellowship Program(Grade B)of China Postdoctoral Science Foundation(Grant No.GBZ20230022).
文摘Controllable shock wave fracturing is an innovative engineering technique used for shale reservoir fracturing and reformation.Understanding the anisotropic fracture mechanism of shale under impact loading is vital for optimizing shock wave fracturing equipment and enhancing shale oil production.In this study,using the well-known notched semi-circular bend(NSCB)sample and the novel double-edge notched flattened Brazilian disc(DNFBD)sample combined with a split Hopkinson pressure bar(SHPB),various dynamic anisotropic fracture properties of Lushan shale,including failure characteristics,fracture toughness,energy dissipation and crack propagation velocity,are comprehensively compared and discussed under mode Ⅰ and mode Ⅱ fracture scenarios.First,using a newly modified fracture criterion considering the strength anisotropy of shale,the DNFBD specimen is predicted to be a robust method for true mode Ⅱ fracture of anisotropic shale rocks.Our experimental results show that the dynamic mode Ⅱ fracture of shale induces a rougher and more complex fracture morphology and performs a higher fracture toughness or fracture energy compared to dynamic mode Ⅰ fracture.The minimal fracture toughness or fracture energy occurs in the Short-transverse orientation,while the maximal ones occur in the Divider orientation.In addition,it is interesting to find that the mode Ⅱ fracture toughness anisotropy index decreases more slowly than that in the mode Ⅰ fracture scenario.These results provide significant insights for understanding the different dynamic fracture mechanisms of anisotropic shale rocks under impact loading and have some beneficial implications for the controllable shock wave fracturing technique.
基金supported by the Research Fund of the National Natural Science Foundation of China(No.52374205)the Fundamental Research Project of the Educational Department of Liaoning Province(No.JYTMS20230793)the Research Fund of the State Key Laboratory of Coal Resources and Safe Mining,CUMT(No.YJY-XD-2024-A-016).
文摘To address the key scientific challenge of monitoring the dynamic fracturing of surrounding rock in deep roadways,this study systematically investigates the quantitative relationship between stress and charge signals during coal mass loading.By integrating innovative analytical approaches,introducing quantitative evaluation indices,and developing a charge–stress inversion model,and incorporating underground monitoring practices,significant progress has been achieved in elucidating the correlation between stress variations and charge signals throughout the entire coal mass fracturing process.First,in the field of stress–charge correlation analysis,empirical mode decomposition(EMD)was combined with wavelet coherence analysis for the first time,enabling the removal of slow-varying stress trends while retaining high-frequency fluctuations.This approach allowed for the quantitative characterization of the evolution of coherence between stress variations and charge fluctuations across multiple time scales.Second,coherence skewness and the proportion of high-coherence intervals were innovatively introduced to examine the influence of time scale selection on correlation results.On this basis,a criterion for determining the near-optimal observation scale of charge signals was proposed,providing a quantitative reference for time scale selection in similar signal analyses.Finally,by correlating charge signals with coal damage factors and stress states,a charge-based damage evolution equation was established to achieve effective stress inversion.Combined with in situ monitoring of stress and charge in roadway surrounding rock,this approach revealed the correlation characteristics of stress and charge intensity responses during the dynamic fracturing process.The results indicate,first,that charge signals are not significantly correlated with the absolute stress level of coal but are directly associated with stress variations following coal damage and failure,with the amplitude of charge fluctuations increasing alongside stress fluctuations.Second,coherence between stress and charge signals varies markedly across time scales,with excessively small or large scales leading to distortion,and the scale corresponding to the peak proportion of intervals with coherence>0.8 was identified as the near-optimal observation scale.Third,charge signals can effectively characterize coal damage factors,and the established damage evolution equation can effectively invert stress variation trends.Fourth,in underground roadways,zones of dynamic fracturing in surrounding rock are commonly located in areas where stress concentration overlaps with regions of high charge intensity,further confirming the strong consistency between charge and stress variations.These findings improve the theoretical framework of charge signal responses in loaded coal and provide a scientific basis for precise“stress-charge”monitoring of dynamic disasters,offering practical potential for engineering applications.
文摘This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.
基金Project(52409128)supported by the National Natural Science Foundation of ChinaProject(SDGZK2425)supported by the Opening Fund of State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering,China。
文摘The shape of underground chambers in deep mining varies due to their geological environment and intended use,which results in different failure modes under the influence of mining activities.However,the effect of chamber shape on the mechanism of structural integrity under dynamic load is still unclear.In this paper,granite samples with circular(C),rectangular(R),long ellipse(EL),and short ellipse(ES)holes were prepared.The dynamic mechanical response and cracking mechanism of granite were systematically analyzed using the split Hopkinson pressure bar(SHPB)test system and the hybrid finite and discrete element method(HFDEM).The results indicate that the dynamic strengths of granite with EL and ES represent the maximum and minimum values within the range of close strain rates,respectively.When EL granite is subjected to dynamic load,the axial stress concentration(in the load direction)is weak,and the transverse stress shows relative dispersion,which is the primary reason for its highest dynamic strength.The failure of granite with various holes primarily involves a tensile-shear mixed fracture,with relatively few pure typeⅡcracks.The chamber’s transverse span is the primary factor influencing the distribution range of the fracture area.
基金the National Key Research and Development Program of China(No.2020YFA0711800)the Natural Science Foundation of Jiangsu Province(No.BK20251631)+1 种基金the Fundamental Research Funds for the Central Universities(No.2025QN1019)Postdoctoral Fellowship Program(Grade B)of China Postdoctoral Science Foundation(No.GZB20250449)。
文摘The safe and efficient development of geothermal energy is a key driver of the energy revolution and environmental governance in this century.To understand the effect of water driving pressure on drilling safety and hydraulic fracturing efficiency during the development of geothermal energy under varying reservoir temperatures,dynamic compression tests were conducted on granite samples subjected to thermal treatment(25,100,200,300,400 and 600℃)and subsequent forced water absorption(0,4,8,12 MPa)using a split Hopkinson pressure bar system.The results indicate that a higher water driving pressure exacerbates the deterioration of dynamic compressive strength with increasing temperature,while it enhances the rate dependence of dynamic compressive strength,except at 600℃.The dynamic increase factor(DIF)of dynamic compressive strength vs.strain rate is determined by both temperature and water driving pressure.A prediction model for the deterioration of dynamic compressive strength considering reservoir temperature and water driving pressure is proposed for geothermal reservoirs.While the splitting failure of samples remains unchanged,crack density increases with increasing temperature and water driving pressure,exhibiting multiscale failure cracks parallel to the loading direction.The structure effective strength model,the wing-crack propagation model,the effect of pore water pressure on dynamic stress intensity factor,and the dynamic response of forced absorbed water can collectively reveal the response mechanisms of dynamic strength.Based on the experimental findings,implications for safe and productive geothermal energy development are discussed,with particular attention to the effect of drilling fluid leakage on wellbore stability and the impact of residual fracturing fluid after backflow on repeated fracturing.This study has important reference value for understanding dynamic wellbore stability under drilling disturbance loads and for the design of repeated dynamic hydraulic fracturing schemes in geothermal energy development.
基金Project (51001014) supported by the Young Scientists Fund of the National Natural Science Foundation of China
文摘The dynamic fracture behaviors of Ti-6Al-4V alloy at high strain rate loading were investigated systemically through Taylor impact test, over the range of impact velocities from 145 m/s to 306 m/s. The critical impact velocity of fracture ranges from 217 m/s to 236 m/s. Smooth surfaces and ductile dimple areas were observed on the fracture surfaces. As the impact velocity reached 260 m/s, the serious melting regions were also observed on the fracture surfaces. Self-organization of cracks emerges when the impact velocity reaches 260 m/s, while some special cracks whose ＂tips＂ are not sharp but arc and smooth, and without any evidence of deformation or adiabatic shear band were also observed on the impact end surfaces. Examination of the sections of these special cracks reveals that the cracks expand along the two maximum shear stress directions respectively, and finally intersect as a tridimensional ＂stagger ridge＂ structure.
基金The Ph.D.Programs Foundation of Ministry of Education of China(No.20120023120020)the National Natural Science Foundation of China(No.51404273)
文摘The reflected optical caustics method is applied to study dynamic fracture problems in hardened cement paste. First both the unreinforced cement paste and the glass fibres reinforced cement paste specimens were fabricated and the reflective coating on the surface of the specimen was prepared. Secondly the crack path and the shadow spot patterns during the crack propagation process for the two specimens were recorded by using a multi-spark high speed camera.Thirdly some dynamic parameters of two cement paste specimens including crack onset time the dynamic stress intensity factor and crack growth velocity were determined and analyzed comparatively.This indicates that the glass fibres can improve the fracture resistance and delay fracture time.These results will play an important role in evaluating the dynamic fracture properties of cement paste.
文摘An effective Dynamic Moire method was presented to determine the critical time of crack instable propagation in rock dynamic fracture. Two pieces of grating were installed near the notch of Short Rod specimen to form the Moire fringes, then the COD versus time could be monitored from the movement of the Moire fringes, and finally the critical time could be determined from the velocity of COD. This method was also compared with another one.It could be concluded that the critical time determined by Dynamic Moire method corresponds with that of the Transmitted Wave method at the loading rates from 103 to 104 MPa·m(1/2)·S(-1).
文摘This study presents a meso-criterion of dynamic fracture, on the basis of stress in integral form In such way the difficulty due to the singularity of stress distribution at the crack tip is overcome. A micro-parameter, the atom radius, is introduced into the criterion.Meanwhile a characteristic time concept is taken into account for describing the inertia effect of material. The criterion reveals The criterion reveals the effects of loading rate, defect and sample geometry,material constants including the micro-structure parameter.
基金supported by the National Natural Science Foundation of China(No.51804309)the Yue Qi Young Scholar Project(2019QN02)+5 种基金Distinguished Scholar Project(2017JCB02)from China University of Mining and Technology-Beijing,Open Fund of State Key Laboratory of Water Resource Protection and Utilization in Coal Mining(Grant No.SHJT-17-42.10)National Natural Science Foundation of China(No.U1910206)the fund of Beijing Outstanding Young Scientist Program(BJJWZYJH01201911413037)the State Key Laboratory of Coal Resources and Safe Mining(Nos.SKLCRSM16KFB07,SKLCRSM16DCB01 and SKLCRSM17DC11)Young Elite Scientists Sponsorship Program by CAST(2017QNRC001)the key project of Key Laboratory of Coal Mine Safety and High Efficiency Mining Co-established by the Province and the Ministry(Anhui University of Science and Technology)(No.JYBSYS2018201).
文摘The fracture behaviour and crack propagation features of coal under coupled static-dynamic loading conditions are important when evaluating the dynamic failure of coal.In this study,coupled static-dynamic loading tests are conducted on Brazilian disc(BD)coal specimens using a modified split Hopkinson pressure bar(SHPB).The effects of the static axial pre-stress and loading rate on the dynamic tensile strength and crack propagation characteristics of BD coal specimens are studied.The average dynamic indirect tensile strength of coal specimens increases first and then decreases with the static axial pre-stress increasing.When no static axial pre-stress is applied,or the static axial pre-stress is 30%of the static tensile strength,the dynamic indirect tensile strength of coal specimens shows an increase trend as the loading rate increases.When the static axial pre-stress is 60%of the static tensile strength,the dynamic indirect tensile strength shows a fluctuant trend as the loading rate increases.According to the crack propagation process of coal specimens recorded by high-speed camera,the impact velocity influences the mode of crack propagation,while the static axial pre-stress influences the direction of crack propagation.The failure of coal specimens is a coupled tensile-shear failure under high impact velocity.When there is no static axial pre-stress,tensile cracks occur in the vertical loading direction.When the static axial pre-stress is applied,the number of cracks perpendicular to the loading direction decreases,and more cracks occur in the parallel loading direction.
文摘The characterization and testing methods of the dynamic fractureinitiation toughness of elas- tic-plastic materials under tensileimpact are studied. By using the self-designed bar-bar tensile impactappa- ratus, a novel test method for studying dynamicfracture-initiation ahs been proposed based on the one-di- mensionaltest principle. The curve of average load v. s. displacement (P-δ)is smooth until unstable crack propagation, and the kinetic energywhich does not contribute to the crack growth can be removed fromtotal work done by external-force to the specimen.
基金support from the National Natural Science Foundation of China(No.41972283)。
文摘To investigate the influence of loading rate and high temperature on the dynamic fracture toughness of rock,dynamic fracture tests were carried out on notched semi-circular bend specimens under four temperature conditions based on the split Hopkinson pressure bar system.Experimental and analytical methods were applied to investigating the effect of temperature gradient on the stress waves.A high-speed camera was used to check the fracture characteristics of the specimens.The results demonstrate that the temperature gradient on the bars will not significantly distort the shape of the stress wave.The dynamic force balance is achieved even when the specimens are at a temperature of 400°C.The dynamic fracture toughness linearly develops with the increase of loading rate within the temperature range of 25-400°C,and high temperature has a strengthening effect on the dynamic fracture toughness.
文摘In this paper,the dynamic propagation problem of a mixed-mode crack was studied by means of the experimental method of caustics.The initial curve and caustic equations were derived un- der the mixed-mode dynamic condition.A multi-point measurement method for determining the dy- namic stress intensity factors,K_Ⅰ~d and K_Ⅱ~d,and the position of the crack tip was developed.Several other methods were adopted to check this method,and showed that it has a good precision.Finally, the dynamic propagating process of a mixed-mode crack in a three-point bending beam specimen was investigated with our method.
基金Russian Foundation for Basic Research,grant number 18-05-70002.
文摘Cyclic freezing-thawing can lead to fracture development in coal,affecting its mechanical and consumer properties.To study crack formations in coal,an ultrasonic sounding method using shear polarized waves was proposed.Samples of three coal types(anthracite,lignite and hard coal)were tested.The research results show that,in contrast to the shear wave velocity,the shear wave amplitude is extremely sensitive to the formation of new cracks at the early stages of cyclic freezing-thawing.Tests also show an inverse correlation between coal compressive strength and its tendency to form cracks under temperature impacts;shear wave attenuation increases more sharply in high-rank coals after the first freezing cycle.Spectral analysis of the received signals also confirmed significant crack formation in anthracite after the first freeze-thaw cycle.The initial anisotropy was determined,and its decrease with an increase in the number of freeze-thaw cycles was shown.The data obtained forms an experimental basis for the development of new approaches to preserve coal consumer properties during storage and transportation under severe natural and climatic conditions.
基金supported by the National Natural Science Foundation of China(11072060)the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘Fractional differential constitutive relationships are introduced to depict the history of dynamic stress inten- sity factors （DSIFs） for a semi-infinite crack in infinite viscoelastic material subjected to anti-plane shear impact load. The basic equations which govern the anti-plane deformation behavior are converted to a fractional wave-like equation. By utilizing Laplace and Fourier integral transforms, the fractional wave-like equation is cast into an ordinary differential equation （ODE）. The unknown function in the solution of ODE is obtained by applying Fourier transform directly to the boundary conditions of fractional wave-like equation in Laplace domain instead of solving dual integral equations. Analytical solutions of DSIFs in Laplace domain are derived by Wiener-Hopf technique and the numerical solutions of DSIFs in time domain are obtained by Talbot algorithm. The effects of four parameters α, β, b1, b2 of the fractional dif- ferential constitutive model on DSIFs are discussed. The numerical results show that the present fractional differential constitutive model can well describe the behavior of DSIFs of anti-plane fracture in viscoelastic materials, and the model is also compatible with solutions of DSIFs of anti-plane fracture in elastic materials.
基金111 project(No.B07050)the National Natural Science Foundation of China(No.90405016).
文摘A novel method was proposed for the evaluation of Mode I dynamic fracture toughness （DFT） under plane stress and small scale yielding conditions for welded joints of stainless steel （SS）, 0Cr18Ni10Ti. In a hybrid experimental-numerical approach, the experiments were carried out on the Hopkinson pressure bar apparatus, and three dimensional （3D） transient numerical simulations were performed by a finite element （FE） computer program. Macroscopical plastic deformation was observed at the loading and supporting points, on the specimens, after the test, which could cause a large error if omitted in the numerical simulation. Therefore, elustic-viscoplustic analysis was performed on the specimen by adopting the Johnson-Cook （J-C） model to describe the rate-dependent plastic flow behavior of the material. The material heterogeneity in the mismatched welded joints, induced by the difference in the base metal （BM） and the weld metal （WM） in yield stress, has also been taken into consideration by using the J-C models separately. Good accordance was obtained between the experimental and the computational results by the present approach. The relationship between plane stress DFT and loading rate was also obtained on the order of 108 MPa.m^1/2.s^-1.
基金support from the National Natural Science Foundation of China(Grant Nos.52225904 and 52039007)the Natural Science Foundation of Sichuan Province(Grant No.2023NSFSC0377).
文摘Rock masses in high-elevation or cold regions are vulnerable to the combined effects of freeze-thaw(F-T)weathering and dynamic mixed-mode loading,posing a serious threaten to the safety and stability of geotechnical engineering.In this study,a series of dynamic fracture tests were conducted on notched semi-circular bend(NSCB)granite specimens subjected to different mixed-mode loading and F-T cycles using a split Hopkinson pressure bar(SHPB)test system.The effects of F-T treatment and dynamic mixed-mode loading on the fracture properties of granite,including effective fracture toughness,progressive fracture process,and macroscopic morphology of fracture surface,were comprehensively revealed.The experimental results suggest that the dynamic effective fracture toughness of NSCB specimens is dependent on the loading rate,particularly when the mode I loading is dominant.Additionally,the fracture toughness decreases as the number of F-T cycles increases,with an inflection point at 30 F-T cycles.All granite specimens subjected to mixed-mode loading exhibit a curved fracture path,with faster crack propagation speed and more fine cracks in specimens exposed to higher F-T cycles.Macroscopic morphology of fracture surface obtained using three-dimensional(3D)scanning indicates that the fractal dimension of the fracture surface increases with increasing F-T cycles,and the increment is more pronounced for specimens subjected to a higher mode II loading component.Moreover,this study compared the fracture resistance of F-T treated granite subjected to dynamic mixed loading using the maximum tangential stress(MTS)criterion and the generalized maximum tangential stress-based semi-analytical(SA-GMTS)criterion.Compared with the MTS criterion,the SA-GMTS criterion shows a more reasonable consistency with the experimental results,with a root mean square error within±7%.
基金Armament Research Board (ARMREB),New Delhi for funding this project work (Project No MAA/03/41)
文摘The armour grade quenched and tempered steel joints fabricated using low hydrogen ferritic steel （LHF） filler exhibited superior joint efficiency owing to preferential ferrite microstructure in the welds and also they offered required resistance to HIC. However, the combat vehicles used in military operations will be required to operate under a wide range of road conditions ranging from first class to cross country. Structural components in combat vehicles are subjected to dynamic loading with high strain rates during operation. Stress loadings within the vehicle hull of these vehicles are expected to fluctuate considerably and structural cracking especially in welds during the service life of these vehicles can lead to catastrophic failures. Under these conditions, fracture behaviour of high strain rate sensitive structural steels can be better understood by dynamic fracture toughness （K1d）. Hence, an attempt was made to study dynamic fracture toughness of the armour grade quenched and tempered steel and their welds fabricated using LHF consumables. The experimental results indicate that the K1d values of the joints fabricated by shielded metal arc welding （SMAW） are higher than those of the joints fabricated using flux cored arc welding （FCAW） process.
基金supported by the National Basic Research Program of China(973 Program)(No.2010CB731503)
文摘The purpose of this work is to investigate the dynamic fracture properties of glassy polycarbonate （PC） with different aging times. The optical method of caustics is adopted in which the shadow spot patterns are recorded by a high speed camera during the dynamic fracture process. Then, the dynamic crack propagation, the stress intensity factor （SIF） and the dynamic fracture toughness of aged PC are obtained through an analysis of the characteristic size of caustic pattern. Moreover, by combining with the investigation of the fracture surface and the energy release rate analysis, the influence of aging time on the dynamic fracture behavior is discussed. Results show that the dynamic fracture toughness and critical energy release rate of PC decreases with aging time for short aging times, whereas they have little change or even increase for longer aging times. Therefore, aging modifies the mechanical properties especially the dynamic fracture properties of PC nonlinearly, not linearly as generally thought of.
基金The authors thank the financial support from the National Natural Science Foundation of China(Grant.Nos.52039007 and 52225904)the Youth Science and Technology Innovation Research Team Fund of Sichuan Province(Grant.No.2020JDTD0001).
文摘In this study,a novel testing method is proposed to characterize the dynamic shear property and failure mechanism of rocks by introducing the short beam compression(SBC)specimen into the split Hopkinson pressure bar(SHPB)system.Firstly,the stress distribution of SBC specimen is comprehensively analyzed by finite element method(FEM),and the results show that the optimal notch separation ratio of SBC specimen is C/H?0.2 to achieve successful dynamic simple-shear tests.Then,dynamic shear tests are conducted on sandstone using the SBC-SHPB method.Via careful pulse shaping technique,the dynamic force balance is guaranteed for SBC specimens,and the testing results show that the dynamic shear strength of sandstone is significantly rate-dependent.Combining the results of dynamic compression and tension tests,the failure envelopes of sandstone under different loading rates are obtained in the principle stress plane.It is found that the failure envelope of sandstone constantly expands outwards with increasing loading rate.Moreover,the energy partition of SBC specimen is quantified by virtue of high-speed digital image correlation(DIC)technique.The results show that the kinetic energy portion is non-negligible,and the shear fracture energy increases with increasing loading rate.In addition,the microscopic shear cracking mechanism of SBC specimen is analyzed by the thin section observation:the intra-granular(TG)fracture of minerals dominates the dynamic shear failure of sandstone,and the portion of TG fracture increases with increasing loading rate.This study provides a convenient and reliable method to investigate the dynamic shear property and failure mechanism of rocks.
