The dynamic adsorption of possible intermediates on single-atom catalysts(SACs)under working condition plays a key role in the electrocatalytic performance by the oxygen evolution reaction(OER),and therefore the perfo...The dynamic adsorption of possible intermediates on single-atom catalysts(SACs)under working condition plays a key role in the electrocatalytic performance by the oxygen evolution reaction(OER),and therefore the performance of the dynamic adsorption should be fully considered in the theoretical screening of potential SACs.Based on density functional theory calculations,the OER performance of 27 types of C_(2)N-supported single transition metal atoms(TM@C_(2)N)is systematically investigated without and with considering the dynamic adsorption of possible intermediates.Without considering dynamic adsorption,only Rh@C_(2)N and Ni@C_(2)N are screened out as good catalysts.However,by further considering the dynamic adsorption configurations of possible intermediates,more promising TM@C_(2)N SACs including Fe(Co,Ni,Ru,Rh,Ir)@C_(2)N toward the OER are screened out.The presence of the intermediates(*HO,*O)on SACs could shift their d band center toward lower energy level,which makes the interaction between the adsorbate and SACs moderate and thus enhances their OER performance.The present work is instructive for further screening and designing of efficient single-atom catalysts for the oxygen evolution reaction.展开更多
Four different types of adsorbents, SBA-15, MCM-41, NaY and SiO2, were used to study the dynamic adsorption/desorption of toluene. To further investigate the influence of pore structure on its adsorption performance, ...Four different types of adsorbents, SBA-15, MCM-41, NaY and SiO2, were used to study the dynamic adsorption/desorption of toluene. To further investigate the influence of pore structure on its adsorption performance, two SBA-15 samples with different microspores were also selected. It is shown that microporous material NaY has the largest adsorption capacity of 0.2873 mL/g, and the amorphous SiO2 exhibits the least capacity of 0.1003 mL/g. MCM-41 also shows a lower break through capacity in spite of the relatively small pore diameter, because it can not provide the necessary small geometric confinement for the tiny adsorbates. However, the mesoporous SBA-15 silica with certain micropore volume shows relatively higher adsorption capacity than that of MCM-41 silica. The presence of micropores directly leads to an increase in the dynamic adsorption capacity of toluene. Although NaY has the highest adsorption capacity for toluene, its complete desorption temperature for toluene is high （〉 350°C）, which limits its wide application. On the contrary, mesoporous silica materials exhibits a good desorption performance for volatile organic compounds at lower temperatures. Among these materials mesoporous SBA-15 samples, with a larger amount micropores and a lower desorption temperature, are a potentially interesting adsorbent for the removal of volatile organic compounds. This behavior should been related with the best synergetic effect of mesopores and micropores.展开更多
In order to remove N_(2) from low quality natural gas,a mathematical model has been established by Aspen adsorption,using the CH_(4)-selective sorbent silicalite-1 pellets.The dynamic adsorption isotherm was first sim...In order to remove N_(2) from low quality natural gas,a mathematical model has been established by Aspen adsorption,using the CH_(4)-selective sorbent silicalite-1 pellets.The dynamic adsorption isotherm was first simulated by breakthrough simulation of a CH_(4)/N_(2) mixture at different adsorption pressures and feed flow rates based on breakthrough experiments.The resulting simulated CH_(4) dynamic adsorption amounts were very close to the experimental data at three different adsorption pressures(100,200,and 300 kPa).Moreover,a single-bed,three-step pressure swing adsorption(PSA)experiment was performed,and the results were in good agreement with the simulated data,further corroborating the accuracy of the gas dynamic adsorption isotherm obtained by the simulation method.Finally,based on the simulated dynamic adsorption isotherm of CH_(4) and N_(2),a four-bed,eight-step PSA process has been designed,which enriched 75%(vol)CH_(4) and 80%(vol)CH_(4) to 95%(vol)and 99%(vol),and provided 99%(vol)recovery.展开更多
[Objective] The paper was to study the dynamic adsorption of microwave modified attapulgite on micro-polluted phenol wastewater. [Method] Cetyl trimethyl ammonium bromide （CATB） modified attapulgite was used to modi...[Objective] The paper was to study the dynamic adsorption of microwave modified attapulgite on micro-polluted phenol wastewater. [Method] Cetyl trimethyl ammonium bromide （CATB） modified attapulgite was used to modify attapulgite, and conducted dynamic test on micro-polluted phenol wastewater. The dynamic charac- teristics of phenol removal were also studied. [Result] Attapulgite modified by CATB has strong adsorption ability on phenol in micro-polluted water, the phenol removal rate increased with the decrease of flow rate of wastewater. When pH value was 6- 8, phenol concentration in wastewater was 17.74 mg/L, flow rate was 2 m/s and ad- sorption time was 25 rain, the removal rate reached 93.07%. The modified atta- pulgite could be regenerated with alkali, and its adsorption ability after regeneration had no obvious decline. The dynamic adsorption process of phenol accorded with the first-order kinetic equation. [Conclusion] The study provided basis for further study on ＂organic matter removal in wastewater.展开更多
Gasoline vapor emissions from service stations significantly affect urban atmospheric.Despite the research on the mechanisms and effectiveness of gasoline vapor removal is limited,this study innovatively investigates ...Gasoline vapor emissions from service stations significantly affect urban atmospheric.Despite the research on the mechanisms and effectiveness of gasoline vapor removal is limited,this study innovatively investigates the static and dynamic adsorption of xylene—a typical gasoline vapor and one of the most active secondary organic aerosol(SOA)species—by commercial activated carbon(AC).The results showed that the saturation static adsorption capacity(Q_(e))of 12 ACs varied from 0.9 to 870.7 mg/g,which correlated with the specific surface area(SSA)and pore volume.Among them,11#and 12#ACs were identified as the most effective adsorbents for typical gasoline vapor removal.The maximum dynamic Q_(e) increased from 301.5 to 414.3 mg/g when the initial xylene concentration rose from 918 to 2008 mg/m^(3) for 11#AC,and from 201.4 to 406.2 mg/g when the initial xylene concentration increased from 589 to 2120 mg/m^(3) for 12#AC.These findings implied a direct correlation between higher initial xylene concentrations and greater dynamic Q_(e) values,with static Q_(e) values surpassing dynamic values.The adsorption kinetics simulation were analyzed by the pseudo-first-order(PFO)and pseudo-second-order(PSO)kinetics.The kinetics results demonstrated that the PFO was more effective in characterizing the adsorption of xylene onto ACs(R2>0.989),indicating that the adsorption of typical gasoline vapor by ACs primarily involves physical adsorption.The findings of static/dynamic adsorption and kinetics provide valuable guidance for practical applications of gasoline vapor removal in service stations.展开更多
This work investigated the removal, kinetics and thermodynamics of iron(II) ions (Fe(II)) by adsorption in static and dynamic conditions in aqueous media on activated carbons (AC-i30min, AC-i1h, and AC-i24h), prepared...This work investigated the removal, kinetics and thermodynamics of iron(II) ions (Fe(II)) by adsorption in static and dynamic conditions in aqueous media on activated carbons (AC-i30min, AC-i1h, and AC-i24h), prepared from palm nut shells collected in the city of Franceville to Gabon, using potassium hydroxide (KOH) as the activating agent. Results on the elimination of Fe(II) in static and dynamic adsorption on prepared activated carbons (ACs) showed that the AC-i24h adsorbent has the best Fe(II) adsorption capacities at saturation (Qsat). The Qsat obtained on AC-i24h in static and dynamic conditions (17.87 and 10.38 mg/g, respectively) were higher than those of AC-i30min (13.89 and 5.54 mg/g respectively) and AC-i1h (14.92 and 8.64 mg/g respectively). Moreover, the static adsorption was more effective in the removal of Fe(II) ions in aqueous media in our experimental conditions. The percentage removal (%E) of Fe(II) obtained on prepared activated carbons in static conditions was better than those obtained in dynamic conditions, especially on AC-i24h, where the %E was 89.27% in static and 61.56% in dynamic. In kinetics, results showed that the pseudo-second-order kinetic model best described the adsorption mechanisms of Fe(II) on prepared activated carbons in static adsorption, with mainly of chemisorption on the solid surfaces. However, in dynamic conditions, the pseudo-first-order kinetic model was more suitable. In addition to the weak interactions between Fe(II) and the activated carbon surfaces, strong interactions (chemisorption) were also observed. Also, thermodynamic data obtained on AC-i24h in static adsorption indicated that the adsorption of Fe(II) was spontaneous and increased with temperature (ΔG˚ H˚ = 503.54 KJ/mol).展开更多
Soil and sediment play a crucial role in the fate and transport of perfiuorooctane sulfonate （PFOS） in the environment. However, the molecular mechanisms of major soil/sediment components on PFOS adsorption remain u...Soil and sediment play a crucial role in the fate and transport of perfiuorooctane sulfonate （PFOS） in the environment. However, the molecular mechanisms of major soil/sediment components on PFOS adsorption remain unclear. This study experimentally isolated three major components in soil/sediment： humin/kerogen, humic/fulvic acid （HA/FA）, and inorganic component after removing organics, and explored their contributions to PFOS adsorption using batch adsorption experiments and molecular dynamic simulations. The results suggest that the humin/kerogen component dominated the PFOS adsorption due to its aliphatic features where hydrophobic effect and phase transfer are the primary adsorption mechanism. Compared with the humin/kerogen, the HA/FA component contributed less to the PFOS adsorption because of its hydrophilic and polar characteristics. The electrostatic repulsion between the polar groups of HA/FA and PFOS anions was attributable to the reduced PFOS adsorption. When the soil organic matter was extracted, the inorganic component also plays a non-negligible role because PFOS molecules might form surface complexes on SiO2 surface. The findings obtained in this study illustrate the contribution of organic matters in soils and sediments to PFOS adsorption and provided new perspective to understanding the adsorption process of PFOS on micro-interface in the environment.展开更多
The adsorption dynamics for phenol in aqueous solution of the adsorbent based on polystyrene was studied. In order to distinguish with the Boyd quasi-homogeneous model of the inner structure of ion-exchanger, the part...The adsorption dynamics for phenol in aqueous solution of the adsorbent based on polystyrene was studied. In order to distinguish with the Boyd quasi-homogeneous model of the inner structure of ion-exchanger, the particle diffusion model including surface diffusion model and pore diffusion model was suggested which is suitable to the macroporous adsorbent. The diffusiondetermination step of the adsorption process was established and the effective diffusion coefficient was also determined. The influence of surface diffusion and pore diffusion on the particle diffusion rate was investigated qualitatively. All of these were very important to improve the structure of the macroporous adsorbent in order to improve the mass-transfer rate.展开更多
Adsorption dynamics of ethane in two granular fixed beds and structured fixed beds with microfibrous composites was studied.5A zeolite membrane 5A/PSSF(paper-like sintered stainless steel fiber)and microfibrous entrap...Adsorption dynamics of ethane in two granular fixed beds and structured fixed beds with microfibrous composites was studied.5A zeolite membrane 5A/PSSF(paper-like sintered stainless steel fiber)and microfibrous entrapped activated carbon(MEAC)composites were prepared by wet layup papermaking/sintering technique and in-situ hydrothermal method.Microfibrous composites were characterized by X-ray diffraction,scanning electron microscopy and N2 adsorption/desorption.Structured fixed beds were designed by filling granular adsorbents(5A zeolite or activated carbon)and microfibrous composites at the inlet and outlet of the beds,respectively.Effects of flow rate,bed height and structure on the breakthrough curves were investigated.The length of unused bed(LUB)was determined,and Yoon–Nelson model was used to fit the breakthrough curves.The experimental results showed ethane was effectively adsorbed on the granular adsorbents and microfibrous composites.Both composites could decrease the LUB values and enhance bed utilization.All breakthrough curves fitted well to Yoon–Nelson model,with correlation coefficient exceeding 0.89.The adsorption rate of ethane could be improved in the structured fixed beds,which showed an enhanced mass transfer efficiency for ethane adsorption.LUB values of structured fixed beds with 5A/PSSF composites were larger,the bed utilization values were lower,and the adsorption rate constants were higher than those with MEAC composites under the same conditions.展开更多
The adsorption dynamics of double-stranded DNA(dsDNA)molecules on a graphene oxide(GO)surface are important for applications of DNA/GO functional structures in biosensors,biomedicine and materials science.In this work...The adsorption dynamics of double-stranded DNA(dsDNA)molecules on a graphene oxide(GO)surface are important for applications of DNA/GO functional structures in biosensors,biomedicine and materials science.In this work,molecular dynamics simulations were used to examine the adsorption of different length dsDNA molecules(from 4 bp to24 bp)on the GO surface.The dsDNA molecules could be adsorbed on the GO surface through the terminal bases and stand on the GO surface.For short dsDNA(4 bp)molecules,the double-helix structure was partially or totally broken and the adsorption dynamics was affected by the structural fluctuation of short dsDNA and the distribution of the oxidized groups on the GO surface.For long dsDNA molecules(from 8 bp to 24 bp)adsorption is stable.By nonlinear fitting of the contact angle between the axis of the dsDNA molecule and the GO surface,we found that a dsDNA molecule adsorbed on a GO surface has the chance of orienting parallel to the GO surface if the length of the dsDNA molecule is longer than 54 bp.We attributed this behavior to the flexibility of dsDNA molecules.With increasing length,the flexibility of dsDNA molecules also increases,and this increasing flexibility gives an adsorbed dsDNA molecule more chance of reaching the GO surface with the free terminal.This work provides a whole picture of adsorption of dsDNA molecules on the GO surface and should be of benefit for the design of DNA/GO based biosensors.展开更多
The dynamic competitive adsorption behaviors of different binary organic vapor mixtures on ACF-Ps under different operation conditions were investigated by gas chromatography in this paper. The studied mixtures includ...The dynamic competitive adsorption behaviors of different binary organic vapor mixtures on ACF-Ps under different operation conditions were investigated by gas chromatography in this paper. The studied mixtures included benzene/toluene, toluene/xylene, benzene/isopropylbenzene, ethyl acetate/toluene and benzene/ethyl acetate. Experimental results show that various ACF-Ps, as with ACF-W, can remove both vapors in binary vapor mixtures with over 99% of removal efficiency before the breakthrough point of the more weakly adsorbed vapor. In dynamic competitive adsorption, the more weakly adsorbed vapor not only penetrates early, but also will be displaced and desorbed consequently by stronger adsorbate and therefore produces a rolling up in the breakthrough curve. The ACF-Ps prepared at different temperatures have somewhat different adsorption selectivity. The feed concentration ratio of vapors, the length/diameter ratio and the thick of bed have effect on competitive adsorption. The competitive adsorption ability of a vapor is mainly related to its boiling point. Usually, the higher the boiling point, the stronger the vapor adsorbed on ACF-P.展开更多
Considering the adsorption loss of the hydraulic fracturing assisted oil displacement(HFAD)agent in the matrix,a method is proposed to characterize the dynamic saturation adsorption capacity of the HFAD agent with pre...Considering the adsorption loss of the hydraulic fracturing assisted oil displacement(HFAD)agent in the matrix,a method is proposed to characterize the dynamic saturation adsorption capacity of the HFAD agent with pressure differential and permeability.Coupled with the viscosity-concentration relationship of the HFAD agent,a non-linear seepage model of HFAD was established,taking into account the adsorption effect of high pressure drops,and the influencing factors were analyzed.The findings indicate that the replenishment of formation energy associated with HFAD technology is predominantly influenced by matrix permeability,fracture length and the initial concentration of the HFAD agent.The effect of replenishment of formation energy is positively correlated with matrix permeability and fracture length,and negatively correlated with the initial concentration of the HFAD agent.The initial concentration and injection amount of the high-pressure HFAD agent can enhance the concentration of the HFAD agent in the matrix and improve the efficiency of oil washing.However,a longer fracture is not conducive to maintaining the high concentration of the HFAD agent in the matrix.Furthermore,the fracture length and pump displacement are the direct factors affecting the fluid flow velocity in the matrix subsequent to HFAD.These factors can be utilized to control the location of the displacement phase front,and thus affect the swept area of HFAD.A reasonable selection of the aforementioned parameters can effectively supplement the formation energy,expand the swept volume of the HFAD agent,improve the recovery efficiency of HFAD,and reduce the development cost.展开更多
In this work,hydrothermal technique combined with KOH activation were employed to develop a series of porous carbons (NPCK-x) using tobacco stem as a low-cost carbon source and (NH_(4))_(2)C_(2)O_(4)as a novel nitroge...In this work,hydrothermal technique combined with KOH activation were employed to develop a series of porous carbons (NPCK-x) using tobacco stem as a low-cost carbon source and (NH_(4))_(2)C_(2)O_(4)as a novel nitrogen-doping agent.Physicochemical properties of NPCK-x were characterized by Brunauer-Emmett-Teller,field emission scanning electron microscopy,X-ray diffraction,Raman microscope,elemental analysis,and X-ray photoelectron spectroscopy.Results showed that the NPCK-x samples possessed large surface areas (maximum:2875 m^(2)/g),hierarchical porous structures,and high degree of disorder.N-containing functional groups decomposed during activation process,which could be the dominant reason for appearance of abundant mesopores and well-developed pore structure.Dynamic chlorobenzene adsorption experiments demonstrated that carbon materials with(NH_(4))_(2)C_(2)O_(4)modification exhibited higher adsorption capacity (maximum:1053 mg/g) than those without modification (maximum:723 mg/g).The reusability studies of chlorobenzene indicated that the desorption efficiency of (NH_(4))_(2)C_(2)O_(4)modified porous carbon reached90.40%after thermal desorption at 100℃ under N2atmosphere.Thomas model fitting results exhibited that the existence of mesopores accelerated the diffusion rate of chlorobenzene in porous carbon.Moreover,Grand Canonical Monte Carlo simulation was conducted to verify that micropores with pore sizes of 1.2–2 nm of the optimized porous carbon were the best adsorption sites for chlorobenzene and mesopores with pore sizes of 2–5 nm were also highly active sites for chlorobenzene adsorption.展开更多
TiO2 nanotubes （TiNT） were prepared by a hydrothermal treatment and modified by three kinds of amines,namely ethylenediamine,polyetherimide and tetraethylenepentamine （TEPA）,to study their CO2 adsorption propertie...TiO2 nanotubes （TiNT） were prepared by a hydrothermal treatment and modified by three kinds of amines,namely ethylenediamine,polyetherimide and tetraethylenepentamine （TEPA）,to study their CO2 adsorption properties from gas streams.The resultant samples were characterized by X-ray diffraction,transmission electron microscopy,and infrared spectroscopy,as well as low temperature N 2 adsorption.CO2 capture was investigated in a dynamic packed column at 30℃.TEPA-modified TiO2 nanotubes showed the highest adsorption capacity of 167.64 mg/g because it had the highest amino-group content among the three amines.CO2 fixation on TiNT impregnated by TEPA was investigated at 30,50,and 70℃,and the adsorption capacity increased slightly with temperature.Following the adsorption step,the sorbents were regenerated by temperature programmed desorption,and the TiNT-TEPA sample,as CO2 sorbent,was found to be readily regenerated and energy-efficient.The cycle test also revealed that the TiNT-TEPA adsorbent is fairly stable,with only a 5% drop in the adsorption capacity after 10 adsorption/desorption cycles.In addition,the CO2 adsorption behavior was investigated with the deactivation model,and which showed an excellent prediction for the TiNT-TEPA breakthrough curves.展开更多
Activated carbons calcined at 400˚C and 600˚C (AC-400 and AC-600), prepared using palm nuts, collected in the town of Franceville in Gabon, were used to study the dynamic adsorption of MnO<sub>4</sub>-<...Activated carbons calcined at 400˚C and 600˚C (AC-400 and AC-600), prepared using palm nuts, collected in the town of Franceville in Gabon, were used to study the dynamic adsorption of MnO<sub>4</sub>-</sup> ions in acidic media on fixed bed column and on the kinetic modeling of experimental data of breakthrough curves of MnO<sub>4</sub>-</sup> ions obtained. Results on the adsorption of MnO<sub>4</sub>-</sup> ions in fixed-bed dynamics obtained on AC-400 and AC-600 adsorbents beds indicated that the AC-400 bed appears to be the most efficient in removing MnO<sub>4</sub>-</sup> ions in acidic media. Indeed, the adsorbed amounts, the adsorbed capacities at saturation and the elimination percentage of MnO<sub>4</sub>-</sup> ions obtained with AC-400 (31.24 mg;52.06 mg·g<sup>-1</sup> and 41.65% respectively) were higher compared to those obtained with AC-600 (9.87 mg;16.45 mg·g<sup>-1</sup> and 17.79% respectively). The breakthrough curves kinetic modeling revealed that the Thomas model and the pseudo-first-order kinetic model were the most suitable models to describe the adsorption of MnO<sub>4</sub>-</sup> ions on adsorbents studied in our experimental conditions. The results of the intraparticle diffusion model showed that intraparticle diffusion was involved in the adsorption mechanism of MnO<sub>4</sub>-</sup> ions on investigated adsorbents and was not the limiting step and the only process controlling MnO<sub>4</sub>-</sup> ions adsorption. In contrast to AC-400, the intraparticle diffusion on AC-600 bed plays an important role in the adsorption mechanism of MnO<sub>4</sub>-</sup> ions.展开更多
In this work, the effects of different methods of activation on CO2 adsorption performance of activated carbon were studied. Activated carbons were prepared from biochar, obtained from fast pyrolysis of white wood, us...In this work, the effects of different methods of activation on CO2 adsorption performance of activated carbon were studied. Activated carbons were prepared from biochar, obtained from fast pyrolysis of white wood, using three different activation methods of steam activation, CO2 activation and Potassium hydroxide（KOH） activation. CO2 adsorption behavior of the produced activated carbons was studied in a fixed-bed reactor set-up at atmospheric pressure, temperature range of 25–65°C and inlet CO2 concentration range of10–30 mol% in He to determine the effects of the surface area, porosity and surface chemistry on adsorption capacity of the samples. Characterization of the micropore and mesopore texture was carried out using N2 and CO2 adsorption at 77 and 273 K, respectively.Central composite design was used to evaluate the combined effects of temperature and concentration of CO2 on the adsorption behavior of the adsorbents. The KOH activated carbon with a total micropore volume of 0.62 cm3/g and surface area of 1400 m2/g had the highest CO2 adsorption capacity of 1.8 mol/kg due to its microporous structure and high surface area under the optimized experimental conditions of 30 mol% CO2 and 25°C. The performance of the adsorbents in multi-cyclic adsorption process was also assessed and the adsorption capacity of KOH and CO2 activated carbons remained remarkably stable after50 cycles with low temperature（160°C） regeneration.展开更多
A general expression of the dynamic surface adsorption [Г（t）] on the expanding spherical surface was derived by solving the corresponding diffusion equation under different initial and boundary conditions. Differen...A general expression of the dynamic surface adsorption [Г（t）] on the expanding spherical surface was derived by solving the corresponding diffusion equation under different initial and boundary conditions. Different from the result of the still spherical surface, two factors （smaller than 1） appeared in the equation for the short time adsorption. Using the derived results, the adsorption kinetics of aqueous decanoyl-N-methylglucamine （Mega-10） solution was studied. In the short time region （t→0）, a good agreement of experimental results with the theory was reached and the adsorption was controlled by diffusion.展开更多
For the remediation of radionuclides(e.g.,^(137)Cs and^(90)Sr)in nuclear wastewater,conventional materials struggle to simultaneously exhibit excellent adsorption performance,high mechanical strength,and good irradiat...For the remediation of radionuclides(e.g.,^(137)Cs and^(90)Sr)in nuclear wastewater,conventional materials struggle to simultaneously exhibit excellent adsorption performance,high mechanical strength,and good irradiation resistance.Herein,high-strength NaX zeolite microspheres from Guangxi university(GXU-NaXs,compressive strength:19.21MPa,Vickers hardness:216.30)with 75-150μm particle sizes were prepared for the first time via in situ conversion via geopolymer technology under normal pressure at 105C for 12 h.The results revealed that GXU-NaXs achieved removal efficiencies exceeding 90%for Cs^(+)and Sr^(2+)within 20 min at a dosage of 0.8 g.L^(-1),following pseudo-second-order and Langmuir models with maximum saturated adsorption capacities of 138.30 and 153.60mg-g-lat 45 and 30 min,respectively.Moreover,GxU-NaXs maintained>98%structural stability and adsorption capacity after 500 kGyy-irradiation,which has the potential for excellent stability in the nuclear environment.GxU-NaXs also exhibited good dynamic adsorption effects at a flow rate of 6 mL·min^(-1),and the removal efficiency after three cycles remained 97.89%and 56.39%for Cst and Sr^(2+),respectively,demonstrating that GXU-NaXs have good feasibility for industrial applications.GxU-NaXs showed good removal capacity and selectivity in complex seawater matrices for Cs^(+)and Sr^(2+).Density functional theory(DFT)calculations revealed adsorption energies of-2.43(Cst)and-3.52 eV(Sr^(2+)),whereas scanning electron microscopy(SEM)/energy dispersive spectrometry(EDS),transmission electron microscopy(TEM),X-ray photoelectron spectroscopy(XPS),and Fourier transform infrared spectroscopy(FT-IR)methods confirmed that the adsorption mechanism was ion exchange and chemisorption.This study pioneers advanced synthesis technology for nuclear adsorbents,offering a promising direction for radioactive wastewater remediation.展开更多
An experiment was carried out to investigate the anti-ammonium shock load capacity of a biological aerated filter （BAF） composed of a double-layer bed. This bed was made up of a top layer of ceramic and a bottom lay...An experiment was carried out to investigate the anti-ammonium shock load capacity of a biological aerated filter （BAF） composed of a double-layer bed. This bed was made up of a top layer of ceramic and a bottom layer of zeolite. The experiment shows that the anti-ammonium shock load process can be divided into two processes： adsorption and release. In the adsorption process, the total removal efficiency of ammonia nitrogen by zeolite and ceramic was 94%. In the release process, the ammonia nitrogen concentration increased significantly and then gradually returned to the normal level four hours after the shock load. The results indicated that the double-layer BAF had a high level of adaptability to the short-term ammonium shock load and long-term operation. The main factors influencing the dynamic process of ammonia nitrogen adsorption were the filter bed height, ammonia nitrogen concentration of influent, and flow rate. The bed depth service time （BDST） model was used to predict the relationship between the filter bed height and breakthrough time at different flow rates, and the results are reliable.展开更多
To understand the adsorption behavior of endocrine disrupting chemicals（EDCs） is important for enhancing the treatment performance and preventing potential secondary pollution caused by EDCs desorption in a microfil...To understand the adsorption behavior of endocrine disrupting chemicals（EDCs） is important for enhancing the treatment performance and preventing potential secondary pollution caused by EDCs desorption in a microfiltration system. The dynamic adsorption of four representative EDCs, namely estriol（E3）, 17β-estradiol（E2）, 17α-ethynylestradiol（EE2）, and 4-nonylphenol（4-NP） in a microfiltration system was investigated using the Thomas＇ model.The product of the equilibrium constant and the total adsorption capacity of the membrane,Ka, for E3, E2, EE2, and 4-NP were 4.91, 9.78, 15.6, and 826, respectively, strongly correlating with the compound octanol–water partition coefficient（KOW）. Adsorption appeared to be enhanced when organic fouling formed on the surface of membrane, indicating the role of an additional adsorption column for EDCs acted by a fouling layer in microfiltration. Results of a comparison between the Ka values for clean membrane and fouled membrane illustrated that the significant contribution made by fouling layers may be attributed to the foulant layer＇s hydrophobicity（in the case of calcium humate layer） and thickness（in the case of calcium alginate layer）. This study provided a novel perspective to quantitatively analyze the dynamic adsorption behavior of trace pollutants in membrane process.展开更多
基金This work is supported by the National Key Research and Development Program(No.2018YFA0208600)the National Natural Science Foundation of Chi-na(No.U19A2015,No.22102167)+2 种基金CAS Project for Young Scientists in Basic Research(YSBR-051)Wenhua Zhang is supported by USTC Tang Scholarship and State Scholarship Fund(202206345005)The calculations were performed at the Super-computing Center of University of Science and Technology of China(USTCSCC).
文摘The dynamic adsorption of possible intermediates on single-atom catalysts(SACs)under working condition plays a key role in the electrocatalytic performance by the oxygen evolution reaction(OER),and therefore the performance of the dynamic adsorption should be fully considered in the theoretical screening of potential SACs.Based on density functional theory calculations,the OER performance of 27 types of C_(2)N-supported single transition metal atoms(TM@C_(2)N)is systematically investigated without and with considering the dynamic adsorption of possible intermediates.Without considering dynamic adsorption,only Rh@C_(2)N and Ni@C_(2)N are screened out as good catalysts.However,by further considering the dynamic adsorption configurations of possible intermediates,more promising TM@C_(2)N SACs including Fe(Co,Ni,Ru,Rh,Ir)@C_(2)N toward the OER are screened out.The presence of the intermediates(*HO,*O)on SACs could shift their d band center toward lower energy level,which makes the interaction between the adsorbate and SACs moderate and thus enhances their OER performance.The present work is instructive for further screening and designing of efficient single-atom catalysts for the oxygen evolution reaction.
基金supported by the National Nature Science Foundation of China (No. 20807010)the Program for New Century Excellent Talents in University (No. NCET-09-0256)+1 种基金the Specialized Research Fund for the Doctoral Program of Higher Education (No. 200801411111)the National High Technology Research and Development Program (863) of China (No. 2009AA062604)
文摘Four different types of adsorbents, SBA-15, MCM-41, NaY and SiO2, were used to study the dynamic adsorption/desorption of toluene. To further investigate the influence of pore structure on its adsorption performance, two SBA-15 samples with different microspores were also selected. It is shown that microporous material NaY has the largest adsorption capacity of 0.2873 mL/g, and the amorphous SiO2 exhibits the least capacity of 0.1003 mL/g. MCM-41 also shows a lower break through capacity in spite of the relatively small pore diameter, because it can not provide the necessary small geometric confinement for the tiny adsorbates. However, the mesoporous SBA-15 silica with certain micropore volume shows relatively higher adsorption capacity than that of MCM-41 silica. The presence of micropores directly leads to an increase in the dynamic adsorption capacity of toluene. Although NaY has the highest adsorption capacity for toluene, its complete desorption temperature for toluene is high （〉 350°C）, which limits its wide application. On the contrary, mesoporous silica materials exhibits a good desorption performance for volatile organic compounds at lower temperatures. Among these materials mesoporous SBA-15 samples, with a larger amount micropores and a lower desorption temperature, are a potentially interesting adsorbent for the removal of volatile organic compounds. This behavior should been related with the best synergetic effect of mesopores and micropores.
文摘In order to remove N_(2) from low quality natural gas,a mathematical model has been established by Aspen adsorption,using the CH_(4)-selective sorbent silicalite-1 pellets.The dynamic adsorption isotherm was first simulated by breakthrough simulation of a CH_(4)/N_(2) mixture at different adsorption pressures and feed flow rates based on breakthrough experiments.The resulting simulated CH_(4) dynamic adsorption amounts were very close to the experimental data at three different adsorption pressures(100,200,and 300 kPa).Moreover,a single-bed,three-step pressure swing adsorption(PSA)experiment was performed,and the results were in good agreement with the simulated data,further corroborating the accuracy of the gas dynamic adsorption isotherm obtained by the simulation method.Finally,based on the simulated dynamic adsorption isotherm of CH_(4) and N_(2),a four-bed,eight-step PSA process has been designed,which enriched 75%(vol)CH_(4) and 80%(vol)CH_(4) to 95%(vol)and 99%(vol),and provided 99%(vol)recovery.
基金Supported by Innovation Fund Project of Ministry of Science and Technology(10C26213201183)~~
文摘[Objective] The paper was to study the dynamic adsorption of microwave modified attapulgite on micro-polluted phenol wastewater. [Method] Cetyl trimethyl ammonium bromide （CATB） modified attapulgite was used to modify attapulgite, and conducted dynamic test on micro-polluted phenol wastewater. The dynamic charac- teristics of phenol removal were also studied. [Result] Attapulgite modified by CATB has strong adsorption ability on phenol in micro-polluted water, the phenol removal rate increased with the decrease of flow rate of wastewater. When pH value was 6- 8, phenol concentration in wastewater was 17.74 mg/L, flow rate was 2 m/s and ad- sorption time was 25 rain, the removal rate reached 93.07%. The modified atta- pulgite could be regenerated with alkali, and its adsorption ability after regeneration had no obvious decline. The dynamic adsorption process of phenol accorded with the first-order kinetic equation. [Conclusion] The study provided basis for further study on ＂organic matter removal in wastewater.
基金supported by the Project of Beijing Municipal Research Institute of Eco-Environmental Protection(China)(JZ2022-012)the National Key Research and Development Program of China(2018YFC1903100)the BJAST Young Scholar Programs(China)(24CE-YS-03).
文摘Gasoline vapor emissions from service stations significantly affect urban atmospheric.Despite the research on the mechanisms and effectiveness of gasoline vapor removal is limited,this study innovatively investigates the static and dynamic adsorption of xylene—a typical gasoline vapor and one of the most active secondary organic aerosol(SOA)species—by commercial activated carbon(AC).The results showed that the saturation static adsorption capacity(Q_(e))of 12 ACs varied from 0.9 to 870.7 mg/g,which correlated with the specific surface area(SSA)and pore volume.Among them,11#and 12#ACs were identified as the most effective adsorbents for typical gasoline vapor removal.The maximum dynamic Q_(e) increased from 301.5 to 414.3 mg/g when the initial xylene concentration rose from 918 to 2008 mg/m^(3) for 11#AC,and from 201.4 to 406.2 mg/g when the initial xylene concentration increased from 589 to 2120 mg/m^(3) for 12#AC.These findings implied a direct correlation between higher initial xylene concentrations and greater dynamic Q_(e) values,with static Q_(e) values surpassing dynamic values.The adsorption kinetics simulation were analyzed by the pseudo-first-order(PFO)and pseudo-second-order(PSO)kinetics.The kinetics results demonstrated that the PFO was more effective in characterizing the adsorption of xylene onto ACs(R2>0.989),indicating that the adsorption of typical gasoline vapor by ACs primarily involves physical adsorption.The findings of static/dynamic adsorption and kinetics provide valuable guidance for practical applications of gasoline vapor removal in service stations.
文摘This work investigated the removal, kinetics and thermodynamics of iron(II) ions (Fe(II)) by adsorption in static and dynamic conditions in aqueous media on activated carbons (AC-i30min, AC-i1h, and AC-i24h), prepared from palm nut shells collected in the city of Franceville to Gabon, using potassium hydroxide (KOH) as the activating agent. Results on the elimination of Fe(II) in static and dynamic adsorption on prepared activated carbons (ACs) showed that the AC-i24h adsorbent has the best Fe(II) adsorption capacities at saturation (Qsat). The Qsat obtained on AC-i24h in static and dynamic conditions (17.87 and 10.38 mg/g, respectively) were higher than those of AC-i30min (13.89 and 5.54 mg/g respectively) and AC-i1h (14.92 and 8.64 mg/g respectively). Moreover, the static adsorption was more effective in the removal of Fe(II) ions in aqueous media in our experimental conditions. The percentage removal (%E) of Fe(II) obtained on prepared activated carbons in static conditions was better than those obtained in dynamic conditions, especially on AC-i24h, where the %E was 89.27% in static and 61.56% in dynamic. In kinetics, results showed that the pseudo-second-order kinetic model best described the adsorption mechanisms of Fe(II) on prepared activated carbons in static adsorption, with mainly of chemisorption on the solid surfaces. However, in dynamic conditions, the pseudo-first-order kinetic model was more suitable. In addition to the weak interactions between Fe(II) and the activated carbon surfaces, strong interactions (chemisorption) were also observed. Also, thermodynamic data obtained on AC-i24h in static adsorption indicated that the adsorption of Fe(II) was spontaneous and increased with temperature (ΔG˚ H˚ = 503.54 KJ/mol).
基金supported by the National Basic Research Program (973) of China (No. 2014CB441102)the Strategic Priority Research Program of the Chinese Academy of Sciences (No. XDB14020201)Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences (No. YSW2013A01)
文摘Soil and sediment play a crucial role in the fate and transport of perfiuorooctane sulfonate （PFOS） in the environment. However, the molecular mechanisms of major soil/sediment components on PFOS adsorption remain unclear. This study experimentally isolated three major components in soil/sediment： humin/kerogen, humic/fulvic acid （HA/FA）, and inorganic component after removing organics, and explored their contributions to PFOS adsorption using batch adsorption experiments and molecular dynamic simulations. The results suggest that the humin/kerogen component dominated the PFOS adsorption due to its aliphatic features where hydrophobic effect and phase transfer are the primary adsorption mechanism. Compared with the humin/kerogen, the HA/FA component contributed less to the PFOS adsorption because of its hydrophilic and polar characteristics. The electrostatic repulsion between the polar groups of HA/FA and PFOS anions was attributable to the reduced PFOS adsorption. When the soil organic matter was extracted, the inorganic component also plays a non-negligible role because PFOS molecules might form surface complexes on SiO2 surface. The findings obtained in this study illustrate the contribution of organic matters in soils and sediments to PFOS adsorption and provided new perspective to understanding the adsorption process of PFOS on micro-interface in the environment.
文摘The adsorption dynamics for phenol in aqueous solution of the adsorbent based on polystyrene was studied. In order to distinguish with the Boyd quasi-homogeneous model of the inner structure of ion-exchanger, the particle diffusion model including surface diffusion model and pore diffusion model was suggested which is suitable to the macroporous adsorbent. The diffusiondetermination step of the adsorption process was established and the effective diffusion coefficient was also determined. The influence of surface diffusion and pore diffusion on the particle diffusion rate was investigated qualitatively. All of these were very important to improve the structure of the macroporous adsorbent in order to improve the mass-transfer rate.
基金support from the National Natural Science Foundation of China(21776101)the National Natural Science Foundation of China(22178122)for this work.
文摘Adsorption dynamics of ethane in two granular fixed beds and structured fixed beds with microfibrous composites was studied.5A zeolite membrane 5A/PSSF(paper-like sintered stainless steel fiber)and microfibrous entrapped activated carbon(MEAC)composites were prepared by wet layup papermaking/sintering technique and in-situ hydrothermal method.Microfibrous composites were characterized by X-ray diffraction,scanning electron microscopy and N2 adsorption/desorption.Structured fixed beds were designed by filling granular adsorbents(5A zeolite or activated carbon)and microfibrous composites at the inlet and outlet of the beds,respectively.Effects of flow rate,bed height and structure on the breakthrough curves were investigated.The length of unused bed(LUB)was determined,and Yoon–Nelson model was used to fit the breakthrough curves.The experimental results showed ethane was effectively adsorbed on the granular adsorbents and microfibrous composites.Both composites could decrease the LUB values and enhance bed utilization.All breakthrough curves fitted well to Yoon–Nelson model,with correlation coefficient exceeding 0.89.The adsorption rate of ethane could be improved in the structured fixed beds,which showed an enhanced mass transfer efficiency for ethane adsorption.LUB values of structured fixed beds with 5A/PSSF composites were larger,the bed utilization values were lower,and the adsorption rate constants were higher than those with MEAC composites under the same conditions.
基金Project supported by the National Natural Science Foundation of China (Grant No.11974366)the Fundamental Research Funds for the Central Universities+2 种基金Chinathe Supercomputer Center of the Chinese Academy of Sciencesthe Shanghai Supercomputer Center of China。
文摘The adsorption dynamics of double-stranded DNA(dsDNA)molecules on a graphene oxide(GO)surface are important for applications of DNA/GO functional structures in biosensors,biomedicine and materials science.In this work,molecular dynamics simulations were used to examine the adsorption of different length dsDNA molecules(from 4 bp to24 bp)on the GO surface.The dsDNA molecules could be adsorbed on the GO surface through the terminal bases and stand on the GO surface.For short dsDNA(4 bp)molecules,the double-helix structure was partially or totally broken and the adsorption dynamics was affected by the structural fluctuation of short dsDNA and the distribution of the oxidized groups on the GO surface.For long dsDNA molecules(from 8 bp to 24 bp)adsorption is stable.By nonlinear fitting of the contact angle between the axis of the dsDNA molecule and the GO surface,we found that a dsDNA molecule adsorbed on a GO surface has the chance of orienting parallel to the GO surface if the length of the dsDNA molecule is longer than 54 bp.We attributed this behavior to the flexibility of dsDNA molecules.With increasing length,the flexibility of dsDNA molecules also increases,and this increasing flexibility gives an adsorbed dsDNA molecule more chance of reaching the GO surface with the free terminal.This work provides a whole picture of adsorption of dsDNA molecules on the GO surface and should be of benefit for the design of DNA/GO based biosensors.
基金supported by Major Natural Science Foundation of Guangdong Provincethe Trans-century Training Programmed Foundation for the Talents of the State Education Ministry of Chinaand the Foundation for the Key Teachers in Chinese University
文摘The dynamic competitive adsorption behaviors of different binary organic vapor mixtures on ACF-Ps under different operation conditions were investigated by gas chromatography in this paper. The studied mixtures included benzene/toluene, toluene/xylene, benzene/isopropylbenzene, ethyl acetate/toluene and benzene/ethyl acetate. Experimental results show that various ACF-Ps, as with ACF-W, can remove both vapors in binary vapor mixtures with over 99% of removal efficiency before the breakthrough point of the more weakly adsorbed vapor. In dynamic competitive adsorption, the more weakly adsorbed vapor not only penetrates early, but also will be displaced and desorbed consequently by stronger adsorbate and therefore produces a rolling up in the breakthrough curve. The ACF-Ps prepared at different temperatures have somewhat different adsorption selectivity. The feed concentration ratio of vapors, the length/diameter ratio and the thick of bed have effect on competitive adsorption. The competitive adsorption ability of a vapor is mainly related to its boiling point. Usually, the higher the boiling point, the stronger the vapor adsorbed on ACF-P.
基金Supported by the National Nature Science Foundation of China(52374035,52074087)Postdoctoral Natural Science Foundation of China(2021M690528)。
文摘Considering the adsorption loss of the hydraulic fracturing assisted oil displacement(HFAD)agent in the matrix,a method is proposed to characterize the dynamic saturation adsorption capacity of the HFAD agent with pressure differential and permeability.Coupled with the viscosity-concentration relationship of the HFAD agent,a non-linear seepage model of HFAD was established,taking into account the adsorption effect of high pressure drops,and the influencing factors were analyzed.The findings indicate that the replenishment of formation energy associated with HFAD technology is predominantly influenced by matrix permeability,fracture length and the initial concentration of the HFAD agent.The effect of replenishment of formation energy is positively correlated with matrix permeability and fracture length,and negatively correlated with the initial concentration of the HFAD agent.The initial concentration and injection amount of the high-pressure HFAD agent can enhance the concentration of the HFAD agent in the matrix and improve the efficiency of oil washing.However,a longer fracture is not conducive to maintaining the high concentration of the HFAD agent in the matrix.Furthermore,the fracture length and pump displacement are the direct factors affecting the fluid flow velocity in the matrix subsequent to HFAD.These factors can be utilized to control the location of the displacement phase front,and thus affect the swept area of HFAD.A reasonable selection of the aforementioned parameters can effectively supplement the formation energy,expand the swept volume of the HFAD agent,improve the recovery efficiency of HFAD,and reduce the development cost.
基金supported by the National Key Research and Development Program of China (No.2019YFC1805804)。
文摘In this work,hydrothermal technique combined with KOH activation were employed to develop a series of porous carbons (NPCK-x) using tobacco stem as a low-cost carbon source and (NH_(4))_(2)C_(2)O_(4)as a novel nitrogen-doping agent.Physicochemical properties of NPCK-x were characterized by Brunauer-Emmett-Teller,field emission scanning electron microscopy,X-ray diffraction,Raman microscope,elemental analysis,and X-ray photoelectron spectroscopy.Results showed that the NPCK-x samples possessed large surface areas (maximum:2875 m^(2)/g),hierarchical porous structures,and high degree of disorder.N-containing functional groups decomposed during activation process,which could be the dominant reason for appearance of abundant mesopores and well-developed pore structure.Dynamic chlorobenzene adsorption experiments demonstrated that carbon materials with(NH_(4))_(2)C_(2)O_(4)modification exhibited higher adsorption capacity (maximum:1053 mg/g) than those without modification (maximum:723 mg/g).The reusability studies of chlorobenzene indicated that the desorption efficiency of (NH_(4))_(2)C_(2)O_(4)modified porous carbon reached90.40%after thermal desorption at 100℃ under N2atmosphere.Thomas model fitting results exhibited that the existence of mesopores accelerated the diffusion rate of chlorobenzene in porous carbon.Moreover,Grand Canonical Monte Carlo simulation was conducted to verify that micropores with pore sizes of 1.2–2 nm of the optimized porous carbon were the best adsorption sites for chlorobenzene and mesopores with pore sizes of 2–5 nm were also highly active sites for chlorobenzene adsorption.
基金supported by the Industry-Academia Cooperation Innovation Fund Projects of Jiangsu Province(No.BY2012025)
文摘TiO2 nanotubes （TiNT） were prepared by a hydrothermal treatment and modified by three kinds of amines,namely ethylenediamine,polyetherimide and tetraethylenepentamine （TEPA）,to study their CO2 adsorption properties from gas streams.The resultant samples were characterized by X-ray diffraction,transmission electron microscopy,and infrared spectroscopy,as well as low temperature N 2 adsorption.CO2 capture was investigated in a dynamic packed column at 30℃.TEPA-modified TiO2 nanotubes showed the highest adsorption capacity of 167.64 mg/g because it had the highest amino-group content among the three amines.CO2 fixation on TiNT impregnated by TEPA was investigated at 30,50,and 70℃,and the adsorption capacity increased slightly with temperature.Following the adsorption step,the sorbents were regenerated by temperature programmed desorption,and the TiNT-TEPA sample,as CO2 sorbent,was found to be readily regenerated and energy-efficient.The cycle test also revealed that the TiNT-TEPA adsorbent is fairly stable,with only a 5% drop in the adsorption capacity after 10 adsorption/desorption cycles.In addition,the CO2 adsorption behavior was investigated with the deactivation model,and which showed an excellent prediction for the TiNT-TEPA breakthrough curves.
文摘Activated carbons calcined at 400˚C and 600˚C (AC-400 and AC-600), prepared using palm nuts, collected in the town of Franceville in Gabon, were used to study the dynamic adsorption of MnO<sub>4</sub>-</sup> ions in acidic media on fixed bed column and on the kinetic modeling of experimental data of breakthrough curves of MnO<sub>4</sub>-</sup> ions obtained. Results on the adsorption of MnO<sub>4</sub>-</sup> ions in fixed-bed dynamics obtained on AC-400 and AC-600 adsorbents beds indicated that the AC-400 bed appears to be the most efficient in removing MnO<sub>4</sub>-</sup> ions in acidic media. Indeed, the adsorbed amounts, the adsorbed capacities at saturation and the elimination percentage of MnO<sub>4</sub>-</sup> ions obtained with AC-400 (31.24 mg;52.06 mg·g<sup>-1</sup> and 41.65% respectively) were higher compared to those obtained with AC-600 (9.87 mg;16.45 mg·g<sup>-1</sup> and 17.79% respectively). The breakthrough curves kinetic modeling revealed that the Thomas model and the pseudo-first-order kinetic model were the most suitable models to describe the adsorption of MnO<sub>4</sub>-</sup> ions on adsorbents studied in our experimental conditions. The results of the intraparticle diffusion model showed that intraparticle diffusion was involved in the adsorption mechanism of MnO<sub>4</sub>-</sup> ions on investigated adsorbents and was not the limiting step and the only process controlling MnO<sub>4</sub>-</sup> ions adsorption. In contrast to AC-400, the intraparticle diffusion on AC-600 bed plays an important role in the adsorption mechanism of MnO<sub>4</sub>-</sup> ions.
基金Funding for this research is provided by Natural Sciences and Engineering Research Council (NSERC) of Canada
文摘In this work, the effects of different methods of activation on CO2 adsorption performance of activated carbon were studied. Activated carbons were prepared from biochar, obtained from fast pyrolysis of white wood, using three different activation methods of steam activation, CO2 activation and Potassium hydroxide（KOH） activation. CO2 adsorption behavior of the produced activated carbons was studied in a fixed-bed reactor set-up at atmospheric pressure, temperature range of 25–65°C and inlet CO2 concentration range of10–30 mol% in He to determine the effects of the surface area, porosity and surface chemistry on adsorption capacity of the samples. Characterization of the micropore and mesopore texture was carried out using N2 and CO2 adsorption at 77 and 273 K, respectively.Central composite design was used to evaluate the combined effects of temperature and concentration of CO2 on the adsorption behavior of the adsorbents. The KOH activated carbon with a total micropore volume of 0.62 cm3/g and surface area of 1400 m2/g had the highest CO2 adsorption capacity of 1.8 mol/kg due to its microporous structure and high surface area under the optimized experimental conditions of 30 mol% CO2 and 25°C. The performance of the adsorbents in multi-cyclic adsorption process was also assessed and the adsorption capacity of KOH and CO2 activated carbons remained remarkably stable after50 cycles with low temperature（160°C） regeneration.
基金Supported by the Scientific Research Foundation for the Returned Overseas Chinese Scholars (D4200111).
文摘A general expression of the dynamic surface adsorption [Г（t）] on the expanding spherical surface was derived by solving the corresponding diffusion equation under different initial and boundary conditions. Different from the result of the still spherical surface, two factors （smaller than 1） appeared in the equation for the short time adsorption. Using the derived results, the adsorption kinetics of aqueous decanoyl-N-methylglucamine （Mega-10） solution was studied. In the short time region （t→0）, a good agreement of experimental results with the theory was reached and the adsorption was controlled by diffusion.
基金supported by the Guangxi Natural Science Fund(Nos.2025GXNSFAA069185 and 2025GXNSFBA069338)the National Natural Science Foundation of China(No.12105056)the Innovation Project of Guangxi Graduate Education(No.YCBZ2023010).
文摘For the remediation of radionuclides(e.g.,^(137)Cs and^(90)Sr)in nuclear wastewater,conventional materials struggle to simultaneously exhibit excellent adsorption performance,high mechanical strength,and good irradiation resistance.Herein,high-strength NaX zeolite microspheres from Guangxi university(GXU-NaXs,compressive strength:19.21MPa,Vickers hardness:216.30)with 75-150μm particle sizes were prepared for the first time via in situ conversion via geopolymer technology under normal pressure at 105C for 12 h.The results revealed that GXU-NaXs achieved removal efficiencies exceeding 90%for Cs^(+)and Sr^(2+)within 20 min at a dosage of 0.8 g.L^(-1),following pseudo-second-order and Langmuir models with maximum saturated adsorption capacities of 138.30 and 153.60mg-g-lat 45 and 30 min,respectively.Moreover,GxU-NaXs maintained>98%structural stability and adsorption capacity after 500 kGyy-irradiation,which has the potential for excellent stability in the nuclear environment.GxU-NaXs also exhibited good dynamic adsorption effects at a flow rate of 6 mL·min^(-1),and the removal efficiency after three cycles remained 97.89%and 56.39%for Cst and Sr^(2+),respectively,demonstrating that GXU-NaXs have good feasibility for industrial applications.GxU-NaXs showed good removal capacity and selectivity in complex seawater matrices for Cs^(+)and Sr^(2+).Density functional theory(DFT)calculations revealed adsorption energies of-2.43(Cst)and-3.52 eV(Sr^(2+)),whereas scanning electron microscopy(SEM)/energy dispersive spectrometry(EDS),transmission electron microscopy(TEM),X-ray photoelectron spectroscopy(XPS),and Fourier transform infrared spectroscopy(FT-IR)methods confirmed that the adsorption mechanism was ion exchange and chemisorption.This study pioneers advanced synthesis technology for nuclear adsorbents,offering a promising direction for radioactive wastewater remediation.
基金supported by the Major Science and Technology Program for Water Pollution Control and Treatment of China(Grant No.2009ZX07317)
文摘An experiment was carried out to investigate the anti-ammonium shock load capacity of a biological aerated filter （BAF） composed of a double-layer bed. This bed was made up of a top layer of ceramic and a bottom layer of zeolite. The experiment shows that the anti-ammonium shock load process can be divided into two processes： adsorption and release. In the adsorption process, the total removal efficiency of ammonia nitrogen by zeolite and ceramic was 94%. In the release process, the ammonia nitrogen concentration increased significantly and then gradually returned to the normal level four hours after the shock load. The results indicated that the double-layer BAF had a high level of adaptability to the short-term ammonium shock load and long-term operation. The main factors influencing the dynamic process of ammonia nitrogen adsorption were the filter bed height, ammonia nitrogen concentration of influent, and flow rate. The bed depth service time （BDST） model was used to predict the relationship between the filter bed height and breakthrough time at different flow rates, and the results are reliable.
基金supported by the National Natural Science Foundation of China(No.51678336)the KWEF-AIT Research Grant,the President Fund for Science and Education Fusion of UCAS(No.Y552022Y00)the special fund of SKLECE,Chinese Academy of Sciences(No.KF2016-19)
文摘To understand the adsorption behavior of endocrine disrupting chemicals（EDCs） is important for enhancing the treatment performance and preventing potential secondary pollution caused by EDCs desorption in a microfiltration system. The dynamic adsorption of four representative EDCs, namely estriol（E3）, 17β-estradiol（E2）, 17α-ethynylestradiol（EE2）, and 4-nonylphenol（4-NP） in a microfiltration system was investigated using the Thomas＇ model.The product of the equilibrium constant and the total adsorption capacity of the membrane,Ka, for E3, E2, EE2, and 4-NP were 4.91, 9.78, 15.6, and 826, respectively, strongly correlating with the compound octanol–water partition coefficient（KOW）. Adsorption appeared to be enhanced when organic fouling formed on the surface of membrane, indicating the role of an additional adsorption column for EDCs acted by a fouling layer in microfiltration. Results of a comparison between the Ka values for clean membrane and fouled membrane illustrated that the significant contribution made by fouling layers may be attributed to the foulant layer＇s hydrophobicity（in the case of calcium humate layer） and thickness（in the case of calcium alginate layer）. This study provided a novel perspective to quantitatively analyze the dynamic adsorption behavior of trace pollutants in membrane process.
