A method for a vehicle durability emission test using a robot driver insteadof human drivers on the chassis dynamometer is presented. The system architecture of vehicledurability emission test cell, the road load simu...A method for a vehicle durability emission test using a robot driver insteadof human drivers on the chassis dynamometer is presented. The system architecture of vehicledurability emission test cell, the road load simulation strategy and the tele-monitoring systembased on Browser/Client structure are described. Furthermore, the construction of the robot driver,vehicle performance self-learning algorithm, multi-mode vehicle control model and vehicle speedtracking strategy based on fuzzy logic arealso discussed. Besides, the capability of controlparameters self-compensation on-line makes it possible to compensate the wear of vehicle componentsand the variety of clutch true bite point during the long term test. Experimental results show thattherobot driver can be applicable to a wide variety of vehicles and the obtained results stay withina tolerance band of ± 2 km/h. Moreover the robot driver is able to control tested vehicles withgood repeatability and consistency; therefore, this methodpresents a solution to eliminate theuncertainty of emission test results by human drivers and to ensure the accuracy and reliability ofemission test results.展开更多
The investigating of the hot press process parameters on the flexural properties of LVL （Laminated Veneer Lumber） reinforced composites derived from rubber wood veneer reinforced with fiber glass woven and epoxy adh...The investigating of the hot press process parameters on the flexural properties of LVL （Laminated Veneer Lumber） reinforced composites derived from rubber wood veneer reinforced with fiber glass woven and epoxy adhesive were performed via the DOE （design of experimental） approach. It was discovered that pressure was the most significantly and negatively effect on the product properties. Enhancing in the mechanical properties was related to decrease the processing pressure. Beside, press time was also significantly and positively effect. Although time was not clearly reflect from the mechanical results, but it was detected from the ANOVA （analysis of variance）results. The mechanical properties were increased with increasing compression time. From the results, the optimal condition to maximize mechanical properties was assumed at low pressure, 15 bars, low temperature, 70℃, and long time, 60 mins. The durability testing including screw nail withdrawal strength, water absorption, and termite resistance of LVL reinforced composite were also studied. The results are shown that the LVL wood has superior properties when compare with solid woods. It was found the withdrawal strength of LVL reinforce composite was higher than the solid woods. As expected that solid woods, except eucalyptus, had low water absorption resistance as it more hygroscopic corresponded to LVL reinforced wood. Also solid woods, except teal（, had low resistance to termite attack. Therefore, LVL reinforced was the best candidate by mean of durability properties compared to solid wood.展开更多
Experimental investigation has been performed to study the leakage and wear characteristics of carbon seal working at high circumferential speed. To expand the scope of application, two newly designed carbon seals wer...Experimental investigation has been performed to study the leakage and wear characteristics of carbon seal working at high circumferential speed. To expand the scope of application, two newly designed carbon seals were compared: #1 Carbon Seal(CS1) with the inner diameter of136 mm and including 4 segments, #2 Carbon Seal(CS2) with the inner diameter of 212 mm and including 6 segments. Air leakage tests were firstly conducted in the Medium-speed Seal Test Rig. The pressure ratio changed from 1.04 to 2.02 with the rotating speed varying from 0 to18300 r/min. Of paramount concern was the durability test, including 300 h running time accumulated by three different working conditions, which was separately implemented on each carbon seal.The morphology variation of the friction surface, wear and leakage were recorded. Results indicated that the leakage monotonously increases with the pressure ratio and decreases with the rotating speed. Comparing with CS1, more typical features exist on the friction surface of CS2, which are generated by more severe wear. Continually, leakage characteristics deteriorate. Furthermore, fitted formula has been educed for the life prediction of carbon seal, which could provide some supports for aero-engine design.展开更多
Assessing the durability of concrete is of prime importance to provide an adequate service life and reduce the repairing cost of structures.Freeze-thaw is one such test that indicates the ability of concrete to last a...Assessing the durability of concrete is of prime importance to provide an adequate service life and reduce the repairing cost of structures.Freeze-thaw is one such test that indicates the ability of concrete to last a long time without a significant loss in its performance.In this study,the freeze-thaw resistance of polymer concrete containing different polymer contents was explored and compared to various conventional cement concretes.Concretes’fresh and hardened properties were assessed for their workability,air content,and compressive strength.The mass loss,length change,dynamic modulus of elasticity,and residual compressive strength were determined for all types of concretes subjected to freeze-thaw cycles according to ASTM C666-procedure A.Results showed that polymer concrete(PC)specimens prepared with higher dosages of polymer contents possessed better freeze-thaw durability compared to other specimens.This high durability performance of PCs is mainly due to their impermeable microstructures,absence of water in their structure,and the high bond strength between aggregates and a polymer binder.It is also indicated that the performance of high-strength concrete containing air-entraining admixture is comparable with PC having optimum polymer content in terms of residual compressive strength,dynamic modulus of elasticity,mass loss,and length change.展开更多
Although timber was used extensively as a structural material for traditional buildings in Turkey in the past, usage of structural timber decreased significantly over time and timber has been largely replaced by other...Although timber was used extensively as a structural material for traditional buildings in Turkey in the past, usage of structural timber decreased significantly over time and timber has been largely replaced by other materials. As timber is a natural, durable and sustainable material, it would be desirable to re-introduce timber structural elements to contemporary construction in a form that is appealing to industry. Timber-glass composite structural elements are potentially a good candidate for this purpose. To that end, a series of tests were conducted on load-bearing timber-glass composites in order to understand the long-term structural performance of the composite material under atmospheric conditions;to decrease the recurring cost of repair and maintenance;and to minimize the exhaustion of raw materials and energy. In this paper, the first part of this experimental work is presented, which focuses on the durability of timber-glass composite under the effects of accelerated aging, carried out on small-sized timber-glass composite specimens. Accelerated aging effects were observed under wetting-drying, freezing-thawing, UV effects, resistance to acids and high temperature. The mechanical strength of the timber-glass composite specimens before and after the effect of accelerated aging was measured by adhesion and shear strength tests and a comparative analysis of the results was carried out. The results of the experiments indicate that timber-glass composite is suitable to be used under protection from environmental conditions.展开更多
Smart windows,capable of dynamically regulating indoor heat,offer a promising avenue for effectively reducing energy consumption.Hydrogel-based smart windows are excellent at thermal modulation and daylighting,but the...Smart windows,capable of dynamically regulating indoor heat,offer a promising avenue for effectively reducing energy consumption.Hydrogel-based smart windows are excellent at thermal modulation and daylighting,but they are difficult to commercialize globally due to problems like winter ice formation,which can affect thermal insulation,daylighting,and structural integrity,as well as an impractical cloud point temperature(t_(cp)).To solve these issues,a ternary anti-freezing system consisting of ethylene glycol(EG),glycerol,and water is proposed.With the t_(cp)regulated at 31.6℃,the system strikes a balance between outstanding daylighting(91.89%)and solar modulation ability(78.32%).Furthermore,the system shows resilience even below-30.0℃and long-term stability,which qualifies it for use in densely populated regions even with severely cold weather.To further illustrate the distinct impacts of EG and glycerol,the optical characteristics and tcpof binary systems containing EG and water as well as glycerol and water were examined.The durability test includes severely cold temperature of-30.0℃ and solar exposure temperature of 60.0℃.This work would offer insights to advance the field's understanding of antifreezing capability modification in smart windows and advance the development of environmentally and energy-efficiently designed buildings.展开更多
Nanomagnetic CoPt truncated octahedral nanoparticles （TONPs） were successfully synthesised through a facile one-pot strategy. These single crystal CoPt TONPs with an average size of about 8 nm exhibit excellent elec...Nanomagnetic CoPt truncated octahedral nanoparticles （TONPs） were successfully synthesised through a facile one-pot strategy. These single crystal CoPt TONPs with an average size of about 8 nm exhibit excellent electrocatalytic performance of both activity and stability for methanol oxidation reaction （MOR）. The mass and specific activities of CoPt TONPs is 8 and 6 times higher than that of standard commercial Pt/C, respectively. After accelerated durability test （ADT）, the loss of electrochemical surface area （ECSA） for CoPt TONPs is only 18.5%, which is significantly less than that of commercial Pt/C （68.2%）, indicating that CoPt TONPs possess much better stability than commercial Pt/C in the prolonged operation. The Curie temperature of CoPt TONPs down to 8 nm is as high as 350 K with weak ferromagntism at room temperature （RT）, which is greatly valuable for recycling in the eletrocatalytic applications.展开更多
文摘A method for a vehicle durability emission test using a robot driver insteadof human drivers on the chassis dynamometer is presented. The system architecture of vehicledurability emission test cell, the road load simulation strategy and the tele-monitoring systembased on Browser/Client structure are described. Furthermore, the construction of the robot driver,vehicle performance self-learning algorithm, multi-mode vehicle control model and vehicle speedtracking strategy based on fuzzy logic arealso discussed. Besides, the capability of controlparameters self-compensation on-line makes it possible to compensate the wear of vehicle componentsand the variety of clutch true bite point during the long term test. Experimental results show thattherobot driver can be applicable to a wide variety of vehicles and the obtained results stay withina tolerance band of ± 2 km/h. Moreover the robot driver is able to control tested vehicles withgood repeatability and consistency; therefore, this methodpresents a solution to eliminate theuncertainty of emission test results by human drivers and to ensure the accuracy and reliability ofemission test results.
文摘The investigating of the hot press process parameters on the flexural properties of LVL （Laminated Veneer Lumber） reinforced composites derived from rubber wood veneer reinforced with fiber glass woven and epoxy adhesive were performed via the DOE （design of experimental） approach. It was discovered that pressure was the most significantly and negatively effect on the product properties. Enhancing in the mechanical properties was related to decrease the processing pressure. Beside, press time was also significantly and positively effect. Although time was not clearly reflect from the mechanical results, but it was detected from the ANOVA （analysis of variance）results. The mechanical properties were increased with increasing compression time. From the results, the optimal condition to maximize mechanical properties was assumed at low pressure, 15 bars, low temperature, 70℃, and long time, 60 mins. The durability testing including screw nail withdrawal strength, water absorption, and termite resistance of LVL reinforced composite were also studied. The results are shown that the LVL wood has superior properties when compare with solid woods. It was found the withdrawal strength of LVL reinforce composite was higher than the solid woods. As expected that solid woods, except eucalyptus, had low water absorption resistance as it more hygroscopic corresponded to LVL reinforced wood. Also solid woods, except teal（, had low resistance to termite attack. Therefore, LVL reinforced was the best candidate by mean of durability properties compared to solid wood.
基金supported by the National Natural Science Foundation of China(No.51976214)National Science and Technology Major Project(2017-Ⅳ-0010-0047)。
文摘Experimental investigation has been performed to study the leakage and wear characteristics of carbon seal working at high circumferential speed. To expand the scope of application, two newly designed carbon seals were compared: #1 Carbon Seal(CS1) with the inner diameter of136 mm and including 4 segments, #2 Carbon Seal(CS2) with the inner diameter of 212 mm and including 6 segments. Air leakage tests were firstly conducted in the Medium-speed Seal Test Rig. The pressure ratio changed from 1.04 to 2.02 with the rotating speed varying from 0 to18300 r/min. Of paramount concern was the durability test, including 300 h running time accumulated by three different working conditions, which was separately implemented on each carbon seal.The morphology variation of the friction surface, wear and leakage were recorded. Results indicated that the leakage monotonously increases with the pressure ratio and decreases with the rotating speed. Comparing with CS1, more typical features exist on the friction surface of CS2, which are generated by more severe wear. Continually, leakage characteristics deteriorate. Furthermore, fitted formula has been educed for the life prediction of carbon seal, which could provide some supports for aero-engine design.
文摘Assessing the durability of concrete is of prime importance to provide an adequate service life and reduce the repairing cost of structures.Freeze-thaw is one such test that indicates the ability of concrete to last a long time without a significant loss in its performance.In this study,the freeze-thaw resistance of polymer concrete containing different polymer contents was explored and compared to various conventional cement concretes.Concretes’fresh and hardened properties were assessed for their workability,air content,and compressive strength.The mass loss,length change,dynamic modulus of elasticity,and residual compressive strength were determined for all types of concretes subjected to freeze-thaw cycles according to ASTM C666-procedure A.Results showed that polymer concrete(PC)specimens prepared with higher dosages of polymer contents possessed better freeze-thaw durability compared to other specimens.This high durability performance of PCs is mainly due to their impermeable microstructures,absence of water in their structure,and the high bond strength between aggregates and a polymer binder.It is also indicated that the performance of high-strength concrete containing air-entraining admixture is comparable with PC having optimum polymer content in terms of residual compressive strength,dynamic modulus of elasticity,mass loss,and length change.
基金the Research Council of Turkey(TUBITAK)for funding the research project“Load Bearing Glass and Timber Composites”(project no:110O950)which is a part of the international research program WoodWisdom-Net.
文摘Although timber was used extensively as a structural material for traditional buildings in Turkey in the past, usage of structural timber decreased significantly over time and timber has been largely replaced by other materials. As timber is a natural, durable and sustainable material, it would be desirable to re-introduce timber structural elements to contemporary construction in a form that is appealing to industry. Timber-glass composite structural elements are potentially a good candidate for this purpose. To that end, a series of tests were conducted on load-bearing timber-glass composites in order to understand the long-term structural performance of the composite material under atmospheric conditions;to decrease the recurring cost of repair and maintenance;and to minimize the exhaustion of raw materials and energy. In this paper, the first part of this experimental work is presented, which focuses on the durability of timber-glass composite under the effects of accelerated aging, carried out on small-sized timber-glass composite specimens. Accelerated aging effects were observed under wetting-drying, freezing-thawing, UV effects, resistance to acids and high temperature. The mechanical strength of the timber-glass composite specimens before and after the effect of accelerated aging was measured by adhesion and shear strength tests and a comparative analysis of the results was carried out. The results of the experiments indicate that timber-glass composite is suitable to be used under protection from environmental conditions.
基金supported by the Key Research and Development Program-Guidance Project of Heilongjiang Province of China(Grant No.GZ20210150)。
文摘Smart windows,capable of dynamically regulating indoor heat,offer a promising avenue for effectively reducing energy consumption.Hydrogel-based smart windows are excellent at thermal modulation and daylighting,but they are difficult to commercialize globally due to problems like winter ice formation,which can affect thermal insulation,daylighting,and structural integrity,as well as an impractical cloud point temperature(t_(cp)).To solve these issues,a ternary anti-freezing system consisting of ethylene glycol(EG),glycerol,and water is proposed.With the t_(cp)regulated at 31.6℃,the system strikes a balance between outstanding daylighting(91.89%)and solar modulation ability(78.32%).Furthermore,the system shows resilience even below-30.0℃and long-term stability,which qualifies it for use in densely populated regions even with severely cold weather.To further illustrate the distinct impacts of EG and glycerol,the optical characteristics and tcpof binary systems containing EG and water as well as glycerol and water were examined.The durability test includes severely cold temperature of-30.0℃ and solar exposure temperature of 60.0℃.This work would offer insights to advance the field's understanding of antifreezing capability modification in smart windows and advance the development of environmentally and energy-efficiently designed buildings.
基金supported by the National Basic Research Program of China(2015CB921401)the National Instrument Program of China(2012YQ120048)+2 种基金the National Natural Science Foundation of China(51625101,51431009,51471183,51331002,51371015,11274371 and 11674023)the Instrument Development Program of Chinese Academy of Sciences(YZ201345)the Fundamental Research Funds for the Central Universities(FRF-BR-15-009B)
文摘Nanomagnetic CoPt truncated octahedral nanoparticles （TONPs） were successfully synthesised through a facile one-pot strategy. These single crystal CoPt TONPs with an average size of about 8 nm exhibit excellent electrocatalytic performance of both activity and stability for methanol oxidation reaction （MOR）. The mass and specific activities of CoPt TONPs is 8 and 6 times higher than that of standard commercial Pt/C, respectively. After accelerated durability test （ADT）, the loss of electrochemical surface area （ECSA） for CoPt TONPs is only 18.5%, which is significantly less than that of commercial Pt/C （68.2%）, indicating that CoPt TONPs possess much better stability than commercial Pt/C in the prolonged operation. The Curie temperature of CoPt TONPs down to 8 nm is as high as 350 K with weak ferromagntism at room temperature （RT）, which is greatly valuable for recycling in the eletrocatalytic applications.
