[Objectives]To amplify and identify the specific gene fragments of cattle and sheep by real-time fluorescence-based PCR,and quickly and accurately identify the adulteration problem of goat milk powder according to the...[Objectives]To amplify and identify the specific gene fragments of cattle and sheep by real-time fluorescence-based PCR,and quickly and accurately identify the adulteration problem of goat milk powder according to the differences of mitochondrial genes among different species.[Methods]The specificity,limit of detection and repeatability test were carried out by isolating somatic cells,extracting template DNA and determining the reaction conditions of real-time fluorescence-based PCR.[Results]The real-time fluorescence-based PCR method could be used to identify the bovine and ovine-derived materials of milk powder with high specificity,high sensitivity and good repeatability,and the limit of detection of milk components in goat milk powder could reach 0.01%.[Conclusions]The real-time fluorescence-based PCR method can be used to quickly and accurately detect the milk components in goat milk powder,and provide some technical support for the adulteration detection of dairy industry.展开更多
Objective:To compare the effects of clinical application of chemiluminescence and real-time,fluorescence-based quantitative PCR in the detection Epstein-Barr virus(EBV).Methods:The data of chemiluminescence and real-t...Objective:To compare the effects of clinical application of chemiluminescence and real-time,fluorescence-based quantitative PCR in the detection Epstein-Barr virus(EBV).Methods:The data of chemiluminescence and real-time fluorescent quantitative PCR.fromipaEsfwo were suspected of being infectea w1tn rito1 roro January 2016 to January 2019 in our hospital were analyzed.The specific stage of EBV infection was analyzed,and the differences in results of the two detection methods were compared.Results:Chemiluminescence method was used to detect EBV infection during the active phase.The sensitivity of the chemiluminescence method was 76.7%(56/73)and the real-time quantitative PCRmethod was 90.4%(66/73).There was a statistical difference between the two detection methods(P<0.05).Conclusion:There was no statistical difference in positive predictive values between the chemiluminescence method and the real-time,fluorescence-based quantitative PCR method in the detection of EBV infection,but the sensitivity of chemiluminescence method is slightly lower than the real-time quantitative PCRmethod.It is noteworthy that chemiluminescence method is convenient and fast while the real-time,fluorescence-based quantitative PCR method is more accurate,which can provide a more accurate reference for clinical treatment.展开更多
The trade-offbetween strength and ductility remains a persistent obstacle in the development of advanced structural materials.In the present study,a novel dual-heterogeneous structure with a bimodal grain distribution...The trade-offbetween strength and ductility remains a persistent obstacle in the development of advanced structural materials.In the present study,a novel dual-heterogeneous structure with a bimodal grain distribution in both ferrite and austenite phases was fabricated via cold rolling and partial recrystallization annealing on solution-treated 2205 duplex stainless steel(DSS).The processed steel exhibited superior mechanical properties,with the yield strength increasing from 586 MPa to 903 MPa,and the ultimate tensile strength from 796 MPa to 1082 MPa,while maintaining a high total elongation of 35.3%.Based on in-situ electron backscatter diffraction(EBSD)and scanning electron microscope(SEM)analyses,the microstructural deformation behavior and strengthening mechanisms of the dual-heterostructured 2205 DSS were elucidated.The outstanding combination of strength and ductility was ascribed to the synergistic effects of grain refinement,dislocation strengthening,and hetero-deformation induced(HDI)strengthening.Moreover,the high ductility in DSS was attributed to the coactivation of cross-slip systems in ferrite{110}and{112}along with the single-slip systems in austenite{111}.These findings provide a new strategy for the design and development of high-strength and ultra-high-strength DSSs.展开更多
Super duplex stainless steels(SDSSs)and hyper duplex stainless steels(HDSSs),with more alloying elements content,are more corrosion resistant than the standard grades.Progresses of research works on weldability of SDS...Super duplex stainless steels(SDSSs)and hyper duplex stainless steels(HDSSs),with more alloying elements content,are more corrosion resistant than the standard grades.Progresses of research works on weldability of SDSSs and HDSSs in recent years are reviewed in this paper.If proper heat input is provided,SDSSs and HDSSs can be welded with most fusion welding processes,while tungsten inert gas welding is the most popular process.SDSSs and HDSSs are more prone to secondary phases precipitation than the standard and lean grades,and heat input for SDSSs and HDSSs welding is restricted to a smaller range.Matching filler materials are usually recommended for SDSSs and HDSSs welding,rather than Ni-riched ones for standard and lean grades.Nitrogen addition in shielding gas is always beneficial.Post weld heat treatment with slow cooling rate will be harmful.Hot cracking tendency of SDSSs and HDSSs joints is not high,but sometimes they can suffer from hydrogen induced stress cracking.展开更多
The precipitation behavior,corrosion,and passivation performance of solutionized and severely sensitized SAF 2507 super-duplex stainless steel subjected to a temperature of 900℃for 10 h are investigated in a twofold ...The precipitation behavior,corrosion,and passivation performance of solutionized and severely sensitized SAF 2507 super-duplex stainless steel subjected to a temperature of 900℃for 10 h are investigated in a twofold concentrated seawater at 60℃.The sensitized alloy exhibits 66.1%γphases and 33.9%σphases,and the originalαphases have completely decomposed through eutectoid transformation,resulting in a microstructure characterized by coarse blockyσ/γ2 aggregates.High defect densities and an increased amount of oxyhydroxides and hydroxides are present in the passive film on the sensitized alloy,thereby enhancing n-type semiconducting character.The inferior performance of the passive film on the sensitized alloy is ascribed to the increased potential drop across the film/solution interface,the high defect densities,and the pronounced n-type character of the passive film resulting from the variations in its constituents.The precipitation ofσphase during sensitization significantly increases intergranular corrosion susceptibility and decreases critical pitting temperature,breakdown potential,and polarization resistance in hot concentrated seawater.展开更多
Over the past few years,the Cu element has attracted much attention in duplex stainless steels.It undoubtedly holds advantageous in regulating the two-phase proportion and austenite stability and is also one of the cr...Over the past few years,the Cu element has attracted much attention in duplex stainless steels.It undoubtedly holds advantageous in regulating the two-phase proportion and austenite stability and is also one of the crucial factors affecting the corrosion resistance.However,the systematic research on the impact of Cu addition to lean duplex stainless steels remains insufficient.In this study,a novel Cu-alloyed Mn-N-type 20Cr lean duplex stainless steel was developed and the effect of Cu on the strain hardening capacity and corrosion resistance was analyzed.The results show that the Cu addition increases the volume fraction and stability of the austenite,retards the martensitic transformation,and extends the transformation-induced plasticity effect to a wider strain range.Compared to the Cu-free steel,the plasticity of Cu-containing steel can be increased by~26%.Additionally,the addition of Cu redistributes the Cr and N elements in the ferrite and austenite phases,thereby improving the corrosion resistance of the lean duplex stainless steel.展开更多
Passive-roof duplexes accommodate shortening at the mountain front of many fold-and-thrust belts worldwide.These structures typically manifest at the surface by hinterland-verging backthrusts that decouple thin-skinne...Passive-roof duplexes accommodate shortening at the mountain front of many fold-and-thrust belts worldwide.These structures typically manifest at the surface by hinterland-verging backthrusts that decouple thin-skinned thrust sheets from underlying foreland-verging duplexes.Although the main fac-tors controlling the development of passive-roof duplexes have mostly been identified,some of their intrinsic characteristics are still poorly defined.These relate to their spatio-temporal relationships to thrust faults located further inland in orogens,and their ability to transport younger rocks over older ones.This study explores these issues in the Casentino-Romagna axial sector of the Northern Apennines,which expose regional forethrusts and backthrusts.Detailed field mapping and analysis of superposed tectonic structures were integrated with apatite fission-track dating for constraining the tim-ing of rock exhumation and correlated tectonic events.Collectively,the results have allowed us to inter-pret the evolution of the study area in terms of two main deformation stages.Specifically,a first,long phase(D_(1))progressed from NE-directed,in-sequence thrusting(∼18 to∼10-9 Ma)to late out-of-sequence thrusting(∼8-5 Ma).A successive deformation phase,that we refer to as D_(2)(∼4-2 Ma),con-sisted of backthrusts and associated folds that were ubiquitous and systematically overprinted onto the foreland-verging D_(1)structures.Such retrovergent structures identify a late deformation phase dom-inated by the development of passive-roof duplexes that propagated hinterlandward into the orogen up to beyond the primary watershed ridge.Orogen-scale processes controlled the evolution of forelandward D_(1)-phase thrusts,although late erosion could have played a major role by bringing the Apennine thrust wedge toward an undercritical state.The latter conditions could have contributed to keeping the out-of-sequence thrusts active,and eventually promoted the development of the D_(2)passive-roof duplexes.展开更多
This paper study the finite time internal synchronization and the external synchronization(hybrid synchronization)for duplex heterogeneous complex networks by time-varying intermittent control.There few study hybrid s...This paper study the finite time internal synchronization and the external synchronization(hybrid synchronization)for duplex heterogeneous complex networks by time-varying intermittent control.There few study hybrid synchronization of heterogeneous duplex complex networks.Therefore,we study the finite time hybrid synchronization of heterogeneous duplex networks,which employs the time-varying intermittent control to drive the duplex heterogeneous complex networks to achieve hybrid synchronization in finite time.To be specific,the switch frequency of the controllers can be changed with time by devise Lyapunov function and boundary function,the internal synchronization and external synchronization are achieved simultaneously in finite time.Finally,numerical examples are presented to illustrate the validness of theoretical results.展开更多
The hot deformation behavior of 2707 hyper duplex stainless steel(HDSS)was investigated through a hot compression test at 950℃ to 1,250℃ at strain rates of 0.01 s^(-1) to 10 s^(-1).Observations from the flow stress ...The hot deformation behavior of 2707 hyper duplex stainless steel(HDSS)was investigated through a hot compression test at 950℃ to 1,250℃ at strain rates of 0.01 s^(-1) to 10 s^(-1).Observations from the flow stress curves reveal a balance between work hardening and dynamic recovery at the beginning of the deformation and subsequently demonstrate various softening mechanisms with the increase of strain.At high strain rates,dynamic recovery is the prevailing mechanism,whereas,at medium and low strain rates,dynamic recrystallization becomes dominant.The constitutive equation was constructed,and the deformation activation energy was calculated to be 645.46 kJ·mol^(-1).The hot processing map was drawn based on the dynamic material model at a strain of 0.8.The results indicate that the hot workability of 2707 HDSS decreases due to its high alloying content.The microstructure evolution of 2707 HDSS at 1,050℃ was identified by means of electron backscatter diffraction and transmission electron microscopy.The results demonstrate that the ferrite completes dynamic recrystallization at the strain rate of 1 s^(-1).The softening process of austenite is influenced by ferrite and mainly experiences dynamic recovery.The austenite located at the α/γ phase boundaries tends to undergo dynamic recrystallization.展开更多
An alternating magnetic field(AMF)was introduced into the narrow gap laser-arc hybrid welding process for 2205 duplex stainless steel thick plates.The corrosion performance of the welded joints was evaluated through e...An alternating magnetic field(AMF)was introduced into the narrow gap laser-arc hybrid welding process for 2205 duplex stainless steel thick plates.The corrosion performance of the welded joints was evaluated through electrochemical studies.The results revealed that joints welded with the application of AMF had a lower corrosion current density compared to those welded without an external AMF.Additionally,these joints showed higher pitting potential and polarization resistance.Microscopic electrochemical analysis indicated that joints subjected to AMF exhibited minimal cathodic current in simulated seawater,with only slight fluctuations in the anodic current peak.Overall,the corrosion levels on the joint surfaces were relatively low.After 4 h of immersion in the corrosive medium,the average impedance of joints exposed to AMF increased by 60.7%compared to those not influenced by a magnetic field.These findings suggest that applying AMF during the narrow gap laser-arc hybrid welding process can significantly improve the corrosion resistance of duplex stainless steel welded joints,reducing their susceptibility to stress corrosion in seawater-like environments.展开更多
Characteristics of microstructures of electroless Ni-P/Ni-W-P duplex coatings were investigated using SEM/EDX and XRD analysis techniques. Microhardness and wear behaviour of the coatings before and after laser crysta...Characteristics of microstructures of electroless Ni-P/Ni-W-P duplex coatings were investigated using SEM/EDX and XRD analysis techniques. Microhardness and wear behaviour of the coatings before and after laser crystallization were evaluated by measurements of hardnesses of coating surface and cross-section, and by unlubricated friction and wear experiments. The results indicate that it is possible to prepare electroless Ni-P/Ni-W-P duplex coatings by sequential immersion in two different plating baths. After laser crystallization, the microstructures of electroless Ni-P/Ni-W-P duplex coatings present the characteristics of higher degree of crystallization and larger grain size for outer layer Ni-W-P than inner Ni-P, but outer layer has a higher hardness. The wear resistance of laser-treated duplex coatings in a given process parameter conditions is superior to the as-plated ones. Laser treatment was performed directly in air without argon protection, which provides the possibility for application of industrialized production.展开更多
Objective:To identify members of genera of rickettsia and O.tsutsugammhi simultaneously.Methods:Rapid and duplex and nested PCR methods have been established by designing primers based on the conserved regions of heat...Objective:To identify members of genera of rickettsia and O.tsutsugammhi simultaneously.Methods:Rapid and duplex and nested PCR methods have been established by designing primers based on the conserved regions of heat shock protein GroEL gene.345 mouse viscera samples including liver,spleen and kidney,96 Xenopsylla cheopis and 32 chiggers collected from Hongta areas of Yuxi city,Yunnan province were tested by the new PCR methods.Results:The result of the study showed that the new PCR methods could identify most members of genera -Rickettsia and Orientia simultaneously with 100%specificity and its sensitivity could test one copy per microliter.The results of detection prevalence of rickettsioses in mouse,flea and mites DNA samples showed that the total rickettsia infection rate in mouse was 34.78%(120/345).The total infection rates in R.typhi,O.t Karp and R.sibirica of mouse samples were 28.12%(97/345),19.71%(68/345) and O. 29%(1/345) respectively.Co-infection rates in R.typhi and 0.t Karp of mouse samples were 13.33%(46/ 345).O.t Karp type has been the main epidemic strain in these areas.Conclusion:We concluded that this PCR method could be used to detect multi-genera rickettsia simultaneously.Molecular evidences provided in this and previous studies strongly support that Hongta areas of Yuxi city are a natural focus for typhus and scrub typhus with the common occurrence of their confection.展开更多
The effects of phase transformation on mechanical properties and pitting corrosion of 2205 duplex stainless steel were investigated. The amount of a phase in the test specimen varied up to a maximum of 6 % by thermal ...The effects of phase transformation on mechanical properties and pitting corrosion of 2205 duplex stainless steel were investigated. The amount of a phase in the test specimen varied up to a maximum of 6 % by thermal treatment at 850 ℃ for up to 60 min. The results showed that ~ phase markedly increased the hardness and decreased the impact toughness of the test steel. But the increasing tendency of the ultimate tensile strength and the yield strength was not obvious, while the total elongation abruptly decreased with the aging time from 5 to 60 min. SEM impact microfractograph analysis revealed that the types of impact fracture changed from ductile mode to transcrystalline mode when the specimens were aged for 5-60 min. Furthermore, the extent of pitting potential reducing was found to be strongly temperature dependent, more pronounced at the higher temperature. During the incubation period of σ phase nucleation, the pitting corrosion test temperature and the aging time had collaborative effects on evidently displacing the pitting potential towards less noble values. After 15 min, the higher temperature contributed more to decreasing the pitting potential than the aging time.展开更多
The electrochemical behaviors of 2205 duplex stainless steel in NaCl solution with different temperatures and concentrations were studied by gravimetric tests, potentiodynamic polarization, electrochemical impedance s...The electrochemical behaviors of 2205 duplex stainless steel in NaCl solution with different temperatures and concentrations were studied by gravimetric tests, potentiodynamic polarization, electrochemical impedance spectroscopy and scanning electron microscopy. The experinental results show that temperature and chloride concentration have a great influence on the pitting resistance of 2205 duplex stainless steels. They not only effect the corrosion rate of pitting, but also change the shape of the pits. When NaCl solution was in low concentration and temperature below the critical pitting temperature, pits were very small and scattered with hemisphere-like shape. On the contrary, the pits of 2205 duplex stainless steel were large and sometimes had a lacy cover when the NaCl concentration was higher and the temperature was 70℃.展开更多
In the present study,the effect of aging heat treatment at 650,750,and 850？C on the impact toughness of 316L austenitic stainless steel,2205 duplex stainless steel and their weldments has been investigated.Welding pr...In the present study,the effect of aging heat treatment at 650,750,and 850？C on the impact toughness of 316L austenitic stainless steel,2205 duplex stainless steel and their weldments has been investigated.Welding process was conducted using the TIG（tungsten inert gas） welding technique.Instrumented impact testing,at room temperature,was employed to determine the effect of aging treatment on the impact properties of investigated materials.Aging treatment resulted in degradation in the impact toughness as demonstrated by the reduction in the impact fracture energy and deformation parameters（strain hardening capacity,fracture deffection,and crack initiation and propagation energy）.The degree of embrittlement was more noticeable in duplex stainless steel parent and weld-metal than in 316L stainless steel and became greater with the increase of aging temperature.The degradation in impact toughness was discussed in relation to the observed precipitation of the intermetallic sigma phase in the microstructure of the stainless steel weldments and the corresponding fracture surface morphology.展开更多
文摘[Objectives]To amplify and identify the specific gene fragments of cattle and sheep by real-time fluorescence-based PCR,and quickly and accurately identify the adulteration problem of goat milk powder according to the differences of mitochondrial genes among different species.[Methods]The specificity,limit of detection and repeatability test were carried out by isolating somatic cells,extracting template DNA and determining the reaction conditions of real-time fluorescence-based PCR.[Results]The real-time fluorescence-based PCR method could be used to identify the bovine and ovine-derived materials of milk powder with high specificity,high sensitivity and good repeatability,and the limit of detection of milk components in goat milk powder could reach 0.01%.[Conclusions]The real-time fluorescence-based PCR method can be used to quickly and accurately detect the milk components in goat milk powder,and provide some technical support for the adulteration detection of dairy industry.
文摘Objective:To compare the effects of clinical application of chemiluminescence and real-time,fluorescence-based quantitative PCR in the detection Epstein-Barr virus(EBV).Methods:The data of chemiluminescence and real-time fluorescent quantitative PCR.fromipaEsfwo were suspected of being infectea w1tn rito1 roro January 2016 to January 2019 in our hospital were analyzed.The specific stage of EBV infection was analyzed,and the differences in results of the two detection methods were compared.Results:Chemiluminescence method was used to detect EBV infection during the active phase.The sensitivity of the chemiluminescence method was 76.7%(56/73)and the real-time quantitative PCRmethod was 90.4%(66/73).There was a statistical difference between the two detection methods(P<0.05).Conclusion:There was no statistical difference in positive predictive values between the chemiluminescence method and the real-time,fluorescence-based quantitative PCR method in the detection of EBV infection,but the sensitivity of chemiluminescence method is slightly lower than the real-time quantitative PCRmethod.It is noteworthy that chemiluminescence method is convenient and fast while the real-time,fluorescence-based quantitative PCR method is more accurate,which can provide a more accurate reference for clinical treatment.
基金supported by the National Natural Science Foundation of China(Nos.U1960115 and U21A20116)the Fundamental Research Funds for the Central Universities(No.N232405-10)Special thanks are due to the instrumental and data analysis from Analytical and Testing Center,Northeastern University.
文摘The trade-offbetween strength and ductility remains a persistent obstacle in the development of advanced structural materials.In the present study,a novel dual-heterogeneous structure with a bimodal grain distribution in both ferrite and austenite phases was fabricated via cold rolling and partial recrystallization annealing on solution-treated 2205 duplex stainless steel(DSS).The processed steel exhibited superior mechanical properties,with the yield strength increasing from 586 MPa to 903 MPa,and the ultimate tensile strength from 796 MPa to 1082 MPa,while maintaining a high total elongation of 35.3%.Based on in-situ electron backscatter diffraction(EBSD)and scanning electron microscope(SEM)analyses,the microstructural deformation behavior and strengthening mechanisms of the dual-heterostructured 2205 DSS were elucidated.The outstanding combination of strength and ductility was ascribed to the synergistic effects of grain refinement,dislocation strengthening,and hetero-deformation induced(HDI)strengthening.Moreover,the high ductility in DSS was attributed to the coactivation of cross-slip systems in ferrite{110}and{112}along with the single-slip systems in austenite{111}.These findings provide a new strategy for the design and development of high-strength and ultra-high-strength DSSs.
文摘Super duplex stainless steels(SDSSs)and hyper duplex stainless steels(HDSSs),with more alloying elements content,are more corrosion resistant than the standard grades.Progresses of research works on weldability of SDSSs and HDSSs in recent years are reviewed in this paper.If proper heat input is provided,SDSSs and HDSSs can be welded with most fusion welding processes,while tungsten inert gas welding is the most popular process.SDSSs and HDSSs are more prone to secondary phases precipitation than the standard and lean grades,and heat input for SDSSs and HDSSs welding is restricted to a smaller range.Matching filler materials are usually recommended for SDSSs and HDSSs welding,rather than Ni-riched ones for standard and lean grades.Nitrogen addition in shielding gas is always beneficial.Post weld heat treatment with slow cooling rate will be harmful.Hot cracking tendency of SDSSs and HDSSs joints is not high,but sometimes they can suffer from hydrogen induced stress cracking.
基金the financial support of the National Natural Science Foundation of China(Nos.52375339 and 52305399)the Basic and Applied Basic Research Program of Guangdong Province(No.2021A1515110729).
文摘The precipitation behavior,corrosion,and passivation performance of solutionized and severely sensitized SAF 2507 super-duplex stainless steel subjected to a temperature of 900℃for 10 h are investigated in a twofold concentrated seawater at 60℃.The sensitized alloy exhibits 66.1%γphases and 33.9%σphases,and the originalαphases have completely decomposed through eutectoid transformation,resulting in a microstructure characterized by coarse blockyσ/γ2 aggregates.High defect densities and an increased amount of oxyhydroxides and hydroxides are present in the passive film on the sensitized alloy,thereby enhancing n-type semiconducting character.The inferior performance of the passive film on the sensitized alloy is ascribed to the increased potential drop across the film/solution interface,the high defect densities,and the pronounced n-type character of the passive film resulting from the variations in its constituents.The precipitation ofσphase during sensitization significantly increases intergranular corrosion susceptibility and decreases critical pitting temperature,breakdown potential,and polarization resistance in hot concentrated seawater.
基金supported by the Jilin Scientific and Technological Development Program(No.YDZJ202201ZYTS669)the National Natural Science Foundation of China(Nos.51974032,52174355,51874043 and 51604034).
文摘Over the past few years,the Cu element has attracted much attention in duplex stainless steels.It undoubtedly holds advantageous in regulating the two-phase proportion and austenite stability and is also one of the crucial factors affecting the corrosion resistance.However,the systematic research on the impact of Cu addition to lean duplex stainless steels remains insufficient.In this study,a novel Cu-alloyed Mn-N-type 20Cr lean duplex stainless steel was developed and the effect of Cu on the strain hardening capacity and corrosion resistance was analyzed.The results show that the Cu addition increases the volume fraction and stability of the austenite,retards the martensitic transformation,and extends the transformation-induced plasticity effect to a wider strain range.Compared to the Cu-free steel,the plasticity of Cu-containing steel can be increased by~26%.Additionally,the addition of Cu redistributes the Cr and N elements in the ferrite and austenite phases,thereby improving the corrosion resistance of the lean duplex stainless steel.
文摘Passive-roof duplexes accommodate shortening at the mountain front of many fold-and-thrust belts worldwide.These structures typically manifest at the surface by hinterland-verging backthrusts that decouple thin-skinned thrust sheets from underlying foreland-verging duplexes.Although the main fac-tors controlling the development of passive-roof duplexes have mostly been identified,some of their intrinsic characteristics are still poorly defined.These relate to their spatio-temporal relationships to thrust faults located further inland in orogens,and their ability to transport younger rocks over older ones.This study explores these issues in the Casentino-Romagna axial sector of the Northern Apennines,which expose regional forethrusts and backthrusts.Detailed field mapping and analysis of superposed tectonic structures were integrated with apatite fission-track dating for constraining the tim-ing of rock exhumation and correlated tectonic events.Collectively,the results have allowed us to inter-pret the evolution of the study area in terms of two main deformation stages.Specifically,a first,long phase(D_(1))progressed from NE-directed,in-sequence thrusting(∼18 to∼10-9 Ma)to late out-of-sequence thrusting(∼8-5 Ma).A successive deformation phase,that we refer to as D_(2)(∼4-2 Ma),con-sisted of backthrusts and associated folds that were ubiquitous and systematically overprinted onto the foreland-verging D_(1)structures.Such retrovergent structures identify a late deformation phase dom-inated by the development of passive-roof duplexes that propagated hinterlandward into the orogen up to beyond the primary watershed ridge.Orogen-scale processes controlled the evolution of forelandward D_(1)-phase thrusts,although late erosion could have played a major role by bringing the Apennine thrust wedge toward an undercritical state.The latter conditions could have contributed to keeping the out-of-sequence thrusts active,and eventually promoted the development of the D_(2)passive-roof duplexes.
基金Project supported by Jilin Provincial Science and Technology Development Plan(Grant No.20220101137JC).
文摘This paper study the finite time internal synchronization and the external synchronization(hybrid synchronization)for duplex heterogeneous complex networks by time-varying intermittent control.There few study hybrid synchronization of heterogeneous duplex complex networks.Therefore,we study the finite time hybrid synchronization of heterogeneous duplex networks,which employs the time-varying intermittent control to drive the duplex heterogeneous complex networks to achieve hybrid synchronization in finite time.To be specific,the switch frequency of the controllers can be changed with time by devise Lyapunov function and boundary function,the internal synchronization and external synchronization are achieved simultaneously in finite time.Finally,numerical examples are presented to illustrate the validness of theoretical results.
基金funded by the Major Science and Technology Program of Luoyang,China(Grant No.2101005A)Provincial and Ministerial Co-construction of Collaborative Innovation Center for Non-ferrous Metal New Materials and Advanced Processing Technology.
文摘The hot deformation behavior of 2707 hyper duplex stainless steel(HDSS)was investigated through a hot compression test at 950℃ to 1,250℃ at strain rates of 0.01 s^(-1) to 10 s^(-1).Observations from the flow stress curves reveal a balance between work hardening and dynamic recovery at the beginning of the deformation and subsequently demonstrate various softening mechanisms with the increase of strain.At high strain rates,dynamic recovery is the prevailing mechanism,whereas,at medium and low strain rates,dynamic recrystallization becomes dominant.The constitutive equation was constructed,and the deformation activation energy was calculated to be 645.46 kJ·mol^(-1).The hot processing map was drawn based on the dynamic material model at a strain of 0.8.The results indicate that the hot workability of 2707 HDSS decreases due to its high alloying content.The microstructure evolution of 2707 HDSS at 1,050℃ was identified by means of electron backscatter diffraction and transmission electron microscopy.The results demonstrate that the ferrite completes dynamic recrystallization at the strain rate of 1 s^(-1).The softening process of austenite is influenced by ferrite and mainly experiences dynamic recovery.The austenite located at the α/γ phase boundaries tends to undergo dynamic recrystallization.
基金supported by the National Natural Science Foundation of China(No.52265054)the Inner Mongolia Autonomous Region Natural Science Foundation Project(No.2022ZD03)+3 种基金the Inner Mongolia Autonomous Region Science and Technology Plan Project(No.2020GG0313)the Inner Mongolia Autonomous Region Natural Science Foundation Doctoral Fund Project,(No.2021BS05016)the Construction project of integrated research and development platform for key technologies in the development and processing of new nonferrous metal materials(No.RZ2300001971)the Basic Research Business Fee Project for Autonomous Region Directly Affiliated Universities(Nos.JY20220199 and JY20220028).
文摘An alternating magnetic field(AMF)was introduced into the narrow gap laser-arc hybrid welding process for 2205 duplex stainless steel thick plates.The corrosion performance of the welded joints was evaluated through electrochemical studies.The results revealed that joints welded with the application of AMF had a lower corrosion current density compared to those welded without an external AMF.Additionally,these joints showed higher pitting potential and polarization resistance.Microscopic electrochemical analysis indicated that joints subjected to AMF exhibited minimal cathodic current in simulated seawater,with only slight fluctuations in the anodic current peak.Overall,the corrosion levels on the joint surfaces were relatively low.After 4 h of immersion in the corrosive medium,the average impedance of joints exposed to AMF increased by 60.7%compared to those not influenced by a magnetic field.These findings suggest that applying AMF during the narrow gap laser-arc hybrid welding process can significantly improve the corrosion resistance of duplex stainless steel welded joints,reducing their susceptibility to stress corrosion in seawater-like environments.
基金Project (ZR2011EMM014) supported by the Natural Science Foundation of Shandong Province, China
文摘Characteristics of microstructures of electroless Ni-P/Ni-W-P duplex coatings were investigated using SEM/EDX and XRD analysis techniques. Microhardness and wear behaviour of the coatings before and after laser crystallization were evaluated by measurements of hardnesses of coating surface and cross-section, and by unlubricated friction and wear experiments. The results indicate that it is possible to prepare electroless Ni-P/Ni-W-P duplex coatings by sequential immersion in two different plating baths. After laser crystallization, the microstructures of electroless Ni-P/Ni-W-P duplex coatings present the characteristics of higher degree of crystallization and larger grain size for outer layer Ni-W-P than inner Ni-P, but outer layer has a higher hardness. The wear resistance of laser-treated duplex coatings in a given process parameter conditions is superior to the as-plated ones. Laser treatment was performed directly in air without argon protection, which provides the possibility for application of industrialized production.
基金supported by National Natural Science Foundation of China(No. 30771854)China-U.S.Collaborative Program on Emerging and Re-emerging Infectious Diseases(No. 1U2GGH000018-01)
文摘Objective:To identify members of genera of rickettsia and O.tsutsugammhi simultaneously.Methods:Rapid and duplex and nested PCR methods have been established by designing primers based on the conserved regions of heat shock protein GroEL gene.345 mouse viscera samples including liver,spleen and kidney,96 Xenopsylla cheopis and 32 chiggers collected from Hongta areas of Yuxi city,Yunnan province were tested by the new PCR methods.Results:The result of the study showed that the new PCR methods could identify most members of genera -Rickettsia and Orientia simultaneously with 100%specificity and its sensitivity could test one copy per microliter.The results of detection prevalence of rickettsioses in mouse,flea and mites DNA samples showed that the total rickettsia infection rate in mouse was 34.78%(120/345).The total infection rates in R.typhi,O.t Karp and R.sibirica of mouse samples were 28.12%(97/345),19.71%(68/345) and O. 29%(1/345) respectively.Co-infection rates in R.typhi and 0.t Karp of mouse samples were 13.33%(46/ 345).O.t Karp type has been the main epidemic strain in these areas.Conclusion:We concluded that this PCR method could be used to detect multi-genera rickettsia simultaneously.Molecular evidences provided in this and previous studies strongly support that Hongta areas of Yuxi city are a natural focus for typhus and scrub typhus with the common occurrence of their confection.
基金Item Sponsored by Special Project of Education Depart ment of Shaanxi Province of China (07JK309)Project of Science andTechnology Research and Development Program of Shaanxi Province of China (2010K10-13)
文摘The effects of phase transformation on mechanical properties and pitting corrosion of 2205 duplex stainless steel were investigated. The amount of a phase in the test specimen varied up to a maximum of 6 % by thermal treatment at 850 ℃ for up to 60 min. The results showed that ~ phase markedly increased the hardness and decreased the impact toughness of the test steel. But the increasing tendency of the ultimate tensile strength and the yield strength was not obvious, while the total elongation abruptly decreased with the aging time from 5 to 60 min. SEM impact microfractograph analysis revealed that the types of impact fracture changed from ductile mode to transcrystalline mode when the specimens were aged for 5-60 min. Furthermore, the extent of pitting potential reducing was found to be strongly temperature dependent, more pronounced at the higher temperature. During the incubation period of σ phase nucleation, the pitting corrosion test temperature and the aging time had collaborative effects on evidently displacing the pitting potential towards less noble values. After 15 min, the higher temperature contributed more to decreasing the pitting potential than the aging time.
基金Funded by the National Program for Basic Conditions Platform (No.2005DKA10400)the National Science Foundation of China (No. 50771020)
文摘The electrochemical behaviors of 2205 duplex stainless steel in NaCl solution with different temperatures and concentrations were studied by gravimetric tests, potentiodynamic polarization, electrochemical impedance spectroscopy and scanning electron microscopy. The experinental results show that temperature and chloride concentration have a great influence on the pitting resistance of 2205 duplex stainless steels. They not only effect the corrosion rate of pitting, but also change the shape of the pits. When NaCl solution was in low concentration and temperature below the critical pitting temperature, pits were very small and scattered with hemisphere-like shape. On the contrary, the pits of 2205 duplex stainless steel were large and sometimes had a lacy cover when the NaCl concentration was higher and the temperature was 70℃.
文摘In the present study,the effect of aging heat treatment at 650,750,and 850？C on the impact toughness of 316L austenitic stainless steel,2205 duplex stainless steel and their weldments has been investigated.Welding process was conducted using the TIG（tungsten inert gas） welding technique.Instrumented impact testing,at room temperature,was employed to determine the effect of aging treatment on the impact properties of investigated materials.Aging treatment resulted in degradation in the impact toughness as demonstrated by the reduction in the impact fracture energy and deformation parameters（strain hardening capacity,fracture deffection,and crack initiation and propagation energy）.The degree of embrittlement was more noticeable in duplex stainless steel parent and weld-metal than in 316L stainless steel and became greater with the increase of aging temperature.The degradation in impact toughness was discussed in relation to the observed precipitation of the intermetallic sigma phase in the microstructure of the stainless steel weldments and the corresponding fracture surface morphology.
