Flat-panel X-ray sources(FPXSs)have many advantages in terms of compactness and low-dose imaging,enhancing their capability for novel X-ray applications.Experimental analysis of the X-ray characteristics and optimizin...Flat-panel X-ray sources(FPXSs)have many advantages in terms of compactness and low-dose imaging,enhancing their capability for novel X-ray applications.Experimental analysis of the X-ray characteristics and optimizing the anode panel of an FPXS are time-consuming,expensive,and sometimes impractical.In this study,a FPXS was prepared using a ZnO nanowire cold cathode and a molybdenum film anode target.Monte Carlo(MC)simulations were utilized to optimize the anode panel and obtain the average fluence,average energy,and spatial distribution of the X-rays for the ZnO nanowire FPXS.The accuracy of the MC simulations was verified by comparing the measured and simulated energy spectra.Optimization of the anode target considers the material,thickness,and morphology,whereas optimization of the substrate focuses on the material and thickness.The results show that the difference between the positions of the K-shell peaks in the measured and simulated energy spectra is within 0.26 keV.At the acceleration voltages of 30 kV,60 kV,and 90 kV,the optimal thicknesses of the tungsten array anode were 0.65μm,2.45μm,and 5μm,respectively,while the molybdenum array anode has the optimal thicknesses of 1.45μm,5.25μm,and 24μm,respectively.The microsemi-ellipsoidal anode with a recessed design showed a 5%increase in the transmitted X-ray fluence compared with the film target.The sapphire substrate with a thickness of 0.78 mm exhibits a mechanical strength comparable to that of a glass substrate with a thickness of 3 mm,implying that the former can increase the average X-ray fluence by reducing the filtration of X-rays.The findings of this study provide valuable guidance for the fabrication and optimization of the ZnO nanowire FPXS.展开更多
On the basis of tests and studies for many years, wheat cold source has been discovered in natural world. It is a donor material supplying a low temperature and causing stronger cooling effect, that is, the canopy tem...On the basis of tests and studies for many years, wheat cold source has been discovered in natural world. It is a donor material supplying a low temperature and causing stronger cooling effect, that is, the canopy temperature of its progeny can be descended universally and some non-cold type acceptor wheat can turn into cold type wheat having good metabolic functions under the condition of that acceptor wheat accepts the gamete of donor wheat supplying a low temperature. Contrast between wheat cold source and general wheat having no the ability of supplying a low temperature shows that second heat source temperature and plant temperature of wheat cold source not only are lower than those of general wheat but its root vigor, rate of awn etiolation, functional duration of leaf, chlorophyll content, soluble protein content, SOD activity, net photosynthetic rate, etc, are also more excellent than those of general wheat, and these all provide certain ecological and physiological bases for the distinction and selection of wheat cold source.展开更多
This paper has developed and characterized a method to produce a velocity-tunable ^87Rb cold atomic source for atomic interferometry application. Using a high speed fluorescence imaging technology, it reports that the...This paper has developed and characterized a method to produce a velocity-tunable ^87Rb cold atomic source for atomic interferometry application. Using a high speed fluorescence imaging technology, it reports that the dynamic process of the atomic source formation is observed and the source performances including the flux and the initial velocity are characterized. A tunable atomic source with the initial velocity of 1.4-2.6 m/s and the atomic source flux of 2× 10^8 - 6 × 10^9 atoms/s has been obtained with the built experimental setup.展开更多
With the increase of mining depth, more and deeper coal mines are limited by heat disaster. The cooling energy in deep mine cooling system comes from mine water inrush or ground cooling tower, but we cannot adopt the ...With the increase of mining depth, more and deeper coal mines are limited by heat disaster. The cooling energy in deep mine cooling system comes from mine water inrush or ground cooling tower, but we cannot adopt the two methods because mine water inrush in many old coal mines in China is limited. What is more, the cooling pipelines cannot be put in narrow pit-shaft. To settle the problem above, according to the characteristics of Zhangxiaolou Coal Mine, this paper adopts the deep mine return air as the cooling energy for deep mine cooling system. In addition, we carried out cite test to extract cold energy from return air. Through monitoring the water quantity, water temperature of cooling system and air temperature, we got the thermodynamic equilibrium parameters during the cooling energy acquisition analysis and the effect of cooling system that the temperature and humidity on working face are respectively reduced to 8-12 ℃ and 8-15% through cooling. This research offers experimental reference for deep mine cooling which lacks cooling energy.展开更多
With the increase of mining depth, the temperature of the original rock in deep mines increases. High temperature heat hazards at working surfaces and driving faces are becoming increasingly more serious. Given the pr...With the increase of mining depth, the temperature of the original rock in deep mines increases. High temperature heat hazards at working surfaces and driving faces are becoming increasingly more serious. Given the problem of mine cooling technologies at China and abroad and the actual conditions of a coal mine, we developed HEMS （High Temperature Exchange Machinery System） with inrushing mine water as the source of cold energy. Combined with the characteristics of a shortage of inrushing water in the coal mine, we proposed the Sanhejian model of HEMS with its lack of a cold source. The cooling engineer- ing construction, given the present conditions in the Sanhejian Coal Mine, consisted of two phases. In phase 1 horizontal water circulation was used as cold energy, while phase II was the geothermal utiliza- tion project. For the key equipment of HEMS-PT or HEMS-T, we provided the operational principle from theory and an actual application. Finally, we analyzed the operational effect of HEMS. After cooling, the temperature at the working face was below 30 ~C, which meets the national regulations. This system opens up new technology to solve the problem of deep mine heat hazards, which makes good sense in energy conservation and pollution reduction, improves the environment and realizes sustainable eco- nomic development.展开更多
Using correlation analyses, composite analyses, and singular value decomposition, the relationship between the atmospheric cold source over the eastern Tibetan Plateau and atmospheric/ocean circulation is discussed. I...Using correlation analyses, composite analyses, and singular value decomposition, the relationship between the atmospheric cold source over the eastern Tibetan Plateau and atmospheric/ocean circulation is discussed. In winter, the anomaly of the strong (weak) atmospheric cold source over the eastern plateau causes low-level anomalous north (south) winds to appear in eastern China and low-level anomaly zonal west (east) winds to prevail in the equatorial Pacific from spring to autumn. This contributes to the anomalous warm (cold) sea surface temperature the following autumn and winter. In addition, the anomalous variation of sea surface temperature over the equatorial middle and eastern Pacific in winter can influence the snow depth and intensity of the cold source over the plateau in the following winter due to variation of the summer west Pacific subtropical high.展开更多
In this paper, design and construction of a modified cold molybdenum cathode Penning ion source was described. It consists of copper cylindrical anode with two cone ends and two movable cold molybdenum cathodes. The t...In this paper, design and construction of a modified cold molybdenum cathode Penning ion source was described. It consists of copper cylindrical anode with two cone ends and two movable cold molybdenum cathodes. The two cathodes were placed symmetrically at two ends of the anode. The modifications were decrease the length of the cylindrical anode to 4 cm instead of 6 cm, transform the copper emission electrode shape from plate of 40 mm length, 25 mm width and 2 mm thickness to disc of 20 mm diameter and 2 mm thickness and transform the inner uncovered area of the emission electrode from slit of 30 mm length and 10 mm width to disc of 5 mm diameter. The copper emission electrode was placed in the middle of the cylindrical anode and has aperture in the center of different diameters. Faraday cup was placed at different distances from the emission electrode aperture. The electrical discharge and the output ion beam characteristics of the modified ion source were measured at different pressures using argon gas. It was found that the optimum operating conditions of the modified ion source are; anode-cathode distance equal to 6 mm, emission electrode aperture diameter equal to 2.5 mm and emission electrode aperture, Faraday cup distance equals 3 cm. The effect of axial samarium cobalt permanent magnet of intensity equal to 300 Gauss on the discharge characteristics of the ion source was determined.展开更多
A partition solution implemented by a cold air curtain for two asymmetric discrete heat sources in a twodimensional rectangular enclosure was numerically studied. Main attentions were focused on the effects of Reynold...A partition solution implemented by a cold air curtain for two asymmetric discrete heat sources in a twodimensional rectangular enclosure was numerically studied. Main attentions were focused on the effects of Reynolds number, Grashof number, separation distance between heat sources, and buoyancy ratio. It is found that the airflow and heat transfer are not only determined by governing parameters, but also affected by boundary conditions. It is also found that nearly symmetry of flow structure corresponds to nearly thermal partition, and the symmetry can be enhanced when Reynolds number, separation distance and buoyancy ratio increase. In addition, it is observed that there is a minimum Reynolds number for obtaining nearly thermal partition, which increases when Grashof number increases.展开更多
Regarding the lack of cold source for underground cooling systems from either mine inflow or return air, field experiments were taken in a high temperature deep coal mine with abundant cold source from surface water. ...Regarding the lack of cold source for underground cooling systems from either mine inflow or return air, field experiments were taken in a high temperature deep coal mine with abundant cold source from surface water. Taking Sanhejian coal mine as an example, this paper introduced the technology scheme of heat disaster governance using surface water cold source. The paper presents the basics of this field experiment at the beginning, following by the design and site layout of the cooling system including the analysis and calculation of cold source. Numerical calculation method is also applied based on the operation parameters to simulate the influence to the surface river ecosystem. The results suggest that the temperature of surface water shall be lower than 34 ℃ after heat exchange, and when more cooling capacities are needed in the future, increasing the water flow is more favorable than increasing the cooling range of water, which is better for the ecological environment protection,展开更多
Selection of air conditioning（AC） cold/heat sources generally concerns about certain aspects and cannot reveal the whole profile of the problems. Grey relation analysis （GRA） is a data processing method to categor...Selection of air conditioning（AC） cold/heat sources generally concerns about certain aspects and cannot reveal the whole profile of the problems. Grey relation analysis （GRA） is a data processing method to categorize the correlation extent of compared sequences and a certain reference sequence in a system with uncertain information. It is applied to evaluating and selecting AC cold/heat sources from four main aspects, which are technology, economy, reliability, and operation and management. Case study shows that the result for selecting AC cold/heat sources with the GRA method can be more reasonable and convincible. Thus it offers a new approach for designers in heating, ventilating and air conditioning field to compare and evaluate different AC cold/heat sou rces.展开更多
Dipole Research EXperiment（DREX） is a new terrella device as part of the Space Plasma Environment Research Facility（SPERF） for laboratory studies of space physics relevant to the inner magnetospheric plasmas. Adeq...Dipole Research EXperiment（DREX） is a new terrella device as part of the Space Plasma Environment Research Facility（SPERF） for laboratory studies of space physics relevant to the inner magnetospheric plasmas. Adequate plasma sources are very important for DREX to achieve its scientific goals. According to different research requirements, there are two density regimes for DREX. The low density regime will be achieved by an electron cyclotron resonance（ECR） system for the ‘whistler/chorus＇ wave investigation, while the high density regime will be achieved by biased cold cathode discharge for the desired ‘Alfvén＇ wave study. The parameters of ‘whistler/chorus＇ waves and ‘Alfvén＇ waves are determined by the scaling law between space and laboratory plasmas in the current device. In this paper, the initial design of these two plasma sources for DREX is described. Focus is placed on the chosen frequency and operation mode of the ECR system which will produce relatively low density ‘artificial radiation belt＇ plasmas and the seed electrons, followed by the design of biased cold cathode discharge to generate plasma with high density.展开更多
According to the specific situation of a general hospital project, this paper analyzes the feasibility of the application of ground source heat pump air conditioning in the project from the conditions, one-time invest...According to the specific situation of a general hospital project, this paper analyzes the feasibility of the application of ground source heat pump air conditioning in the project from the conditions, one-time investment, energy consumption and operating costs of the implementation of ground source heat pump air conditioning, and comprehensively expounds several important technical measures of the implementation of ground source heat pump air conditioning. Combined with the characteristics of this project, the operation strategies of ground source heat pump air conditioning system under summer cooling condition, winter heating condition and over season condition are designed and put forward to ensure that the ground source heat pump air conditioning system can achieve the expected design effect and energy saving and emission reduction benefits.展开更多
基金supported by the National Key Research and Development Program of China(Nos.2022YFA1204203 and 2022YFA1204201)Opening Fund of the State Key Laboratory of Optoelectronic Materials and Technologies at Sun Yat-sen University(No.OEMT-2023-KF-01)+1 种基金National Natural Science Foundation of China(Nos.61971463,82272131,and 82202960)the Guangdong Basic and Applied Basic Research Foundation(No.2023A1515010537).
文摘Flat-panel X-ray sources(FPXSs)have many advantages in terms of compactness and low-dose imaging,enhancing their capability for novel X-ray applications.Experimental analysis of the X-ray characteristics and optimizing the anode panel of an FPXS are time-consuming,expensive,and sometimes impractical.In this study,a FPXS was prepared using a ZnO nanowire cold cathode and a molybdenum film anode target.Monte Carlo(MC)simulations were utilized to optimize the anode panel and obtain the average fluence,average energy,and spatial distribution of the X-rays for the ZnO nanowire FPXS.The accuracy of the MC simulations was verified by comparing the measured and simulated energy spectra.Optimization of the anode target considers the material,thickness,and morphology,whereas optimization of the substrate focuses on the material and thickness.The results show that the difference between the positions of the K-shell peaks in the measured and simulated energy spectra is within 0.26 keV.At the acceleration voltages of 30 kV,60 kV,and 90 kV,the optimal thicknesses of the tungsten array anode were 0.65μm,2.45μm,and 5μm,respectively,while the molybdenum array anode has the optimal thicknesses of 1.45μm,5.25μm,and 24μm,respectively.The microsemi-ellipsoidal anode with a recessed design showed a 5%increase in the transmitted X-ray fluence compared with the film target.The sapphire substrate with a thickness of 0.78 mm exhibits a mechanical strength comparable to that of a glass substrate with a thickness of 3 mm,implying that the former can increase the average X-ray fluence by reducing the filtration of X-rays.The findings of this study provide valuable guidance for the fabrication and optimization of the ZnO nanowire FPXS.
基金the National Nature Science Foundation of China (No. 39870477,30070150).
文摘On the basis of tests and studies for many years, wheat cold source has been discovered in natural world. It is a donor material supplying a low temperature and causing stronger cooling effect, that is, the canopy temperature of its progeny can be descended universally and some non-cold type acceptor wheat can turn into cold type wheat having good metabolic functions under the condition of that acceptor wheat accepts the gamete of donor wheat supplying a low temperature. Contrast between wheat cold source and general wheat having no the ability of supplying a low temperature shows that second heat source temperature and plant temperature of wheat cold source not only are lower than those of general wheat but its root vigor, rate of awn etiolation, functional duration of leaf, chlorophyll content, soluble protein content, SOD activity, net photosynthetic rate, etc, are also more excellent than those of general wheat, and these all provide certain ecological and physiological bases for the distinction and selection of wheat cold source.
基金supported in part by National Natural Science Foundation of China (Grant No 50775127/E0525)National Basic Research Specialized Program of China (Grant No 2007CB306504)
文摘This paper has developed and characterized a method to produce a velocity-tunable ^87Rb cold atomic source for atomic interferometry application. Using a high speed fluorescence imaging technology, it reports that the dynamic process of the atomic source formation is observed and the source performances including the flux and the initial velocity are characterized. A tunable atomic source with the initial velocity of 1.4-2.6 m/s and the atomic source flux of 2× 10^8 - 6 × 10^9 atoms/s has been obtained with the built experimental setup.
基金Financial supports for this project, provided by the key program supported by the National Natural Science Foundation of China(No. 51134005)the Doctoral Scientific Fund Project of the Ministry of Education of China (No. 20120023120004), are gratefully acknowledged
文摘With the increase of mining depth, more and deeper coal mines are limited by heat disaster. The cooling energy in deep mine cooling system comes from mine water inrush or ground cooling tower, but we cannot adopt the two methods because mine water inrush in many old coal mines in China is limited. What is more, the cooling pipelines cannot be put in narrow pit-shaft. To settle the problem above, according to the characteristics of Zhangxiaolou Coal Mine, this paper adopts the deep mine return air as the cooling energy for deep mine cooling system. In addition, we carried out cite test to extract cold energy from return air. Through monitoring the water quantity, water temperature of cooling system and air temperature, we got the thermodynamic equilibrium parameters during the cooling energy acquisition analysis and the effect of cooling system that the temperature and humidity on working face are respectively reduced to 8-12 ℃ and 8-15% through cooling. This research offers experimental reference for deep mine cooling which lacks cooling energy.
基金Financial support for this project, provided by the Key Basic Research Program of China (No.2006CB202200)the National Major Project of Ministry of Education (No.304005)the Program for Changjiang Scholars and Innovative Research Team in University of China (No.IRT0656)
文摘With the increase of mining depth, the temperature of the original rock in deep mines increases. High temperature heat hazards at working surfaces and driving faces are becoming increasingly more serious. Given the problem of mine cooling technologies at China and abroad and the actual conditions of a coal mine, we developed HEMS （High Temperature Exchange Machinery System） with inrushing mine water as the source of cold energy. Combined with the characteristics of a shortage of inrushing water in the coal mine, we proposed the Sanhejian model of HEMS with its lack of a cold source. The cooling engineer- ing construction, given the present conditions in the Sanhejian Coal Mine, consisted of two phases. In phase 1 horizontal water circulation was used as cold energy, while phase II was the geothermal utiliza- tion project. For the key equipment of HEMS-PT or HEMS-T, we provided the operational principle from theory and an actual application. Finally, we analyzed the operational effect of HEMS. After cooling, the temperature at the working face was below 30 ~C, which meets the national regulations. This system opens up new technology to solve the problem of deep mine heat hazards, which makes good sense in energy conservation and pollution reduction, improves the environment and realizes sustainable eco- nomic development.
基金Natural Science Foundation of China (90711003, 40633018)
文摘Using correlation analyses, composite analyses, and singular value decomposition, the relationship between the atmospheric cold source over the eastern Tibetan Plateau and atmospheric/ocean circulation is discussed. In winter, the anomaly of the strong (weak) atmospheric cold source over the eastern plateau causes low-level anomalous north (south) winds to appear in eastern China and low-level anomaly zonal west (east) winds to prevail in the equatorial Pacific from spring to autumn. This contributes to the anomalous warm (cold) sea surface temperature the following autumn and winter. In addition, the anomalous variation of sea surface temperature over the equatorial middle and eastern Pacific in winter can influence the snow depth and intensity of the cold source over the plateau in the following winter due to variation of the summer west Pacific subtropical high.
文摘In this paper, design and construction of a modified cold molybdenum cathode Penning ion source was described. It consists of copper cylindrical anode with two cone ends and two movable cold molybdenum cathodes. The two cathodes were placed symmetrically at two ends of the anode. The modifications were decrease the length of the cylindrical anode to 4 cm instead of 6 cm, transform the copper emission electrode shape from plate of 40 mm length, 25 mm width and 2 mm thickness to disc of 20 mm diameter and 2 mm thickness and transform the inner uncovered area of the emission electrode from slit of 30 mm length and 10 mm width to disc of 5 mm diameter. The copper emission electrode was placed in the middle of the cylindrical anode and has aperture in the center of different diameters. Faraday cup was placed at different distances from the emission electrode aperture. The electrical discharge and the output ion beam characteristics of the modified ion source were measured at different pressures using argon gas. It was found that the optimum operating conditions of the modified ion source are; anode-cathode distance equal to 6 mm, emission electrode aperture diameter equal to 2.5 mm and emission electrode aperture, Faraday cup distance equals 3 cm. The effect of axial samarium cobalt permanent magnet of intensity equal to 300 Gauss on the discharge characteristics of the ion source was determined.
基金Project (50408019) supported by the National Natural Science Foundation of China
文摘A partition solution implemented by a cold air curtain for two asymmetric discrete heat sources in a twodimensional rectangular enclosure was numerically studied. Main attentions were focused on the effects of Reynolds number, Grashof number, separation distance between heat sources, and buoyancy ratio. It is found that the airflow and heat transfer are not only determined by governing parameters, but also affected by boundary conditions. It is also found that nearly symmetry of flow structure corresponds to nearly thermal partition, and the symmetry can be enhanced when Reynolds number, separation distance and buoyancy ratio increase. In addition, it is observed that there is a minimum Reynolds number for obtaining nearly thermal partition, which increases when Grashof number increases.
基金supported by the Key Project of National Natural Science Foundation‘‘Deep Heat Governance and Utilization’’(No.51134005)the Doctoral Fund of Ministry of Education(No.20120023120004)
文摘Regarding the lack of cold source for underground cooling systems from either mine inflow or return air, field experiments were taken in a high temperature deep coal mine with abundant cold source from surface water. Taking Sanhejian coal mine as an example, this paper introduced the technology scheme of heat disaster governance using surface water cold source. The paper presents the basics of this field experiment at the beginning, following by the design and site layout of the cooling system including the analysis and calculation of cold source. Numerical calculation method is also applied based on the operation parameters to simulate the influence to the surface river ecosystem. The results suggest that the temperature of surface water shall be lower than 34 ℃ after heat exchange, and when more cooling capacities are needed in the future, increasing the water flow is more favorable than increasing the cooling range of water, which is better for the ecological environment protection,
文摘Selection of air conditioning（AC） cold/heat sources generally concerns about certain aspects and cannot reveal the whole profile of the problems. Grey relation analysis （GRA） is a data processing method to categorize the correlation extent of compared sequences and a certain reference sequence in a system with uncertain information. It is applied to evaluating and selecting AC cold/heat sources from four main aspects, which are technology, economy, reliability, and operation and management. Case study shows that the result for selecting AC cold/heat sources with the GRA method can be more reasonable and convincible. Thus it offers a new approach for designers in heating, ventilating and air conditioning field to compare and evaluate different AC cold/heat sou rces.
基金supported by National Natural Science Foundation of China(Nos.11505040,11261140326,11405038 and 51577043)China Postdoctoral Science Foundation(Nos.2016M591518,2015M570283)HIT.NSRIF under Grant No.2017008
文摘Dipole Research EXperiment（DREX） is a new terrella device as part of the Space Plasma Environment Research Facility（SPERF） for laboratory studies of space physics relevant to the inner magnetospheric plasmas. Adequate plasma sources are very important for DREX to achieve its scientific goals. According to different research requirements, there are two density regimes for DREX. The low density regime will be achieved by an electron cyclotron resonance（ECR） system for the ‘whistler/chorus＇ wave investigation, while the high density regime will be achieved by biased cold cathode discharge for the desired ‘Alfvén＇ wave study. The parameters of ‘whistler/chorus＇ waves and ‘Alfvén＇ waves are determined by the scaling law between space and laboratory plasmas in the current device. In this paper, the initial design of these two plasma sources for DREX is described. Focus is placed on the chosen frequency and operation mode of the ECR system which will produce relatively low density ‘artificial radiation belt＇ plasmas and the seed electrons, followed by the design of biased cold cathode discharge to generate plasma with high density.
文摘According to the specific situation of a general hospital project, this paper analyzes the feasibility of the application of ground source heat pump air conditioning in the project from the conditions, one-time investment, energy consumption and operating costs of the implementation of ground source heat pump air conditioning, and comprehensively expounds several important technical measures of the implementation of ground source heat pump air conditioning. Combined with the characteristics of this project, the operation strategies of ground source heat pump air conditioning system under summer cooling condition, winter heating condition and over season condition are designed and put forward to ensure that the ground source heat pump air conditioning system can achieve the expected design effect and energy saving and emission reduction benefits.
