Multi-phase microstructures having good ductility may replace the conventional microstructures in different technological applications such as pressure vessels.Mechanical properties including the fracture behavior and...Multi-phase microstructures having good ductility may replace the conventional microstructures in different technological applications such as pressure vessels.Mechanical properties including the fracture behavior and the service life of pressure vessels are strongly affected by the microstructure.The objective of this study was to investigate the correlation between different dual-phase microstructures and mechanical properties of 42CrMo4 (AISI 4140) steel.To produce the martensite-bainite (M-B),the martensite-ferrite (M-F),and the ferrite-bainite (F-B) microstructures,the step quenching heat treatment was used.Mechanical properties of heat treated samples including the strength,ductility,and impact energy were measured.Tensile experiments revealed a discontinuous yielding in the F-B specimen with ferritic matrix.Fracto\graphic results showed high concentration bright facets (BFs) on broken specimen surfaces indicating the brittle cleavage fracture was the predominant mechanism in the dual-phase microstructures.展开更多
The simultaneous enhancement of magnetic and mechanical properties is desirable but challenging for soft-magnetic materials.A fabrication strategy to meet this requirement is therefore in high demand.Herein,bulk equia...The simultaneous enhancement of magnetic and mechanical properties is desirable but challenging for soft-magnetic materials.A fabrication strategy to meet this requirement is therefore in high demand.Herein,bulk equiatomic dual-phase AlCoFeMnNi high-entropy alloys were fabricated via a magnetic levitation induction melting and casting process followed by annealing at 700-1000℃,and their microstructures as well as mechanical and magnetic properties were investigated.The as-cast alloy possessed a single metastable B2-ordered solid solution that decomposed upon annealing into a dual-phase structure comprising an Al-and Ni-rich body-centered cubic(BCC)matrix and Fe-and Mn-rich face-centered cubic(FCC)precipitates both in the grain interior and along the grain boundaries.The magnetic and mechanical properties were closely related to the relative volume fraction of FCC in the alloy.The FCC volume fraction could be increased by increasing the annealing temperature,thereby offering tunable properties.The optimal annealing temperature for balanced magnetic and mechanical properties was found to be 800℃.The alloy annealed at this temperature had an average BCC grain size of 12±3μm and FCC volume fraction of 41±4%.Correspondingly,the s aturation magnetization and coercivity reached 82.57 Am^2/kg and 433 A/m,respectively.The compressive yield strength and fracture strength were 1022 and 2539 MPa,respectively,and the plasticity was 33%.Owing to its adjustable microstructure and properties,the AlCoFeMnNi alloy has potential for use as a multi-functional soft-magnetic material.展开更多
Continuous annealing simulation is used in studying the influence of continuous annealing process parameters on the microstructure and mechanical properties of a GPa-grade C-Si-Mn-Cr-Mo dual-phase steel.The experiment...Continuous annealing simulation is used in studying the influence of continuous annealing process parameters on the microstructure and mechanical properties of a GPa-grade C-Si-Mn-Cr-Mo dual-phase steel.The experimental results indicate that increasing soaking time increases the volume fraction of martensite and the size of martensite islands, as well as tensile strength(TS) and yield strength(YS),while decreasing plasticity.As the steel slowly cools to a lower temperature prior to final quenching, TS and YS decrease, whereas elongation increases.The decrease in martensite content is due to the partial decomposition of austenite into ferrite during long slow cooling before quenching.As overaging temperature increases because of the tempering of martensite and aging of ferrite, TS decreases and YS increases.Work hardening analysis shows that in the initial stage of deformation, low overaging temperatures enhance work hardening ability.展开更多
Different stress states have a significant influence on the magnitude of the microscopic plastic strain and result in the development of the microstructure evolution.As a result,a comprehensive understanding of the di...Different stress states have a significant influence on the magnitude of the microscopic plastic strain and result in the development of the microstructure evolution.As a result,a comprehensive understanding of the different scale variation on microstructure evolution during bending deformation is essential.The advanced high strength dual-phase(DP1180)steel was investigated using multiscale microstructure-based 3D representative volume element(RVE)modelling technology with emphasis on understanding the relationship between the microstructure,localised stress-strain evolution as well as the deformation characteristics in the bending process.It is demonstrated that the localised development in bending can be more accurately described by microscopic deformation when taking into account microstructural properties.Microstructure-based 3D RVEs from each chosen bending condition generally have comparable localisation properties,whilst the magnitudes and intensities differ.In addition,the most severe localised bands are predicted to occur close to the ferrite and martensite phase boundaries where the martensite grains are close together or have a somewhat sharp edge.The numerically predicted results for the microstructure evolution,shear bands development and stress and strain distribution after 3-point bending exhibit a good agreement with the relevant experimental observations.展开更多
Effects of intercritical annealing temperature on microstructures and mechanical properties of ultrahigh-strength dual-phase(DP) steel were investigated.Results reveal that the volume fraction of martensite increases ...Effects of intercritical annealing temperature on microstructures and mechanical properties of ultrahigh-strength dual-phase(DP) steel were investigated.Results reveal that the volume fraction of martensite increases as the intercritical annealing temperature increases.Under optimal annealing conditions, the DP steel exhibited a microstructure comprising nearly equiaxed ferrite with uniformly distributed martensite islands.Variations in micro-hardness, strength, elongation, and fracture mechanisms were closely linked to the corresponding microstructural features.展开更多
Nearly undamaged joints of electron beam welded(EBW)dual-phase Mg-8Li-3Al-2Zn-0.5Y alloy were achieved with joint coefficients exceeding 95%.All specimens were fractured at the base metal(BM),implying a significant de...Nearly undamaged joints of electron beam welded(EBW)dual-phase Mg-8Li-3Al-2Zn-0.5Y alloy were achieved with joint coefficients exceeding 95%.All specimens were fractured at the base metal(BM),implying a significant departure from conventional fracture modes of welded joints.The fusion zone(FZ)consists of ultrafine acicular α-Mg and equiaxed β-Li,with grain sizes reduced by approximately 90% and 80%,respectively,compared to the base metal.This results in a significant increase in microhardness of about 40%.A unique multiphase mixture was observed in the heat-affected zone(HAZ),which mainly consists of lamellar eutectoid structures,fine precipitates zone,and numerous fine Mg_(3)(Al,Zn)particles.This mixture was transformed from typical Li(Al,Zn)(a common softening phase)undergoing atomic diffusion and solid-state phase transformation during welding.It introduces a synergistic strengthening effect,making the heat-affected zone no longer the weakest part of the joint.This study provides valuable insights into the electron beam welding technology for Mg-Li alloys and offers theoretical support for manufacturing high-quality joints.展开更多
The A2B2O7 series of ternary oxides are derivatives of fluorite structure over a wide range of rA/rB.Competing by two rare-earths the A-site,La2-xLuxZr2O7 ceramics were found transparent only in pore-free microstructu...The A2B2O7 series of ternary oxides are derivatives of fluorite structure over a wide range of rA/rB.Competing by two rare-earths the A-site,La2-xLuxZr2O7 ceramics were found transparent only in pore-free microstructures with similar grain sizes of pyrochlore(PY)and defective fluorite(DF)phases.Mutual solubilities of Lu and La in both phases were found by imaging and energy-dispersive spectroscopy analysis in scanning electron microscope.The dual-phase microstructures were developed with liquid-phase resulted from the exothermal reactions,creating a miscibility gap between two structures to moderate their competing grain growth.Change in grain growth behaviors in liquid-phase is described by a nucleation line in La2Zr2O7-Lu2Zr2O7 phase diagram.Variations of solution levels in DF grains and co-existing of dual-phase grain clusters in common orientation were revealed in transparent ceramics by electron backscattered diffraction,resulted by epitaxial relation of two phases promoted by the liquid-phase.Oxygen vacancies and various hole states common in both phases were revealed by characteristic cathodoluminescence peaks.The collective effects of pores,phase and grain boundaries,oxygen vacancies on scattering or absorption of visible light enables to establish a hierarchical microstructure-transparency relationship in such complex oxide ceramics,which could be tailored or further optimized by controllable sintering.展开更多
The influence of homogenization parameters on element segregation,dendritic structure,and the precipitate evolution in the GH3535-0.08wt%Y alloy was investigated.Additionally,some specific homogenization parameters we...The influence of homogenization parameters on element segregation,dendritic structure,and the precipitate evolution in the GH3535-0.08wt%Y alloy was investigated.Additionally,some specific homogenization parameters were maintained constant throughout the experiments.Results indicate that the heat treatment at 1150℃for 10 h is the optimal homogenization condition.Following this optimal treatment,dendrite structures and element segregation are eliminated.Furthermore,both SiC and Y_(5)Si_(3)precipitates in the as-cast alloy decrease significantly.Conversely,the homogenization at 1188℃induces overheating defects within the alloy.Although SiC and Y_(5)Si_(3)phases also decrease,some large M6C phases can still be observed,adversely affecting subsequent forging processes.展开更多
To investigate the influence of Al-Zn-Mg-Cu alloy with as-homogenized and as-rolled initial microstructures on the tensile flow behavior,isothermal tensile tests were conducted on a GLEEBLE-3500 isothermal simulator a...To investigate the influence of Al-Zn-Mg-Cu alloy with as-homogenized and as-rolled initial microstructures on the tensile flow behavior,isothermal tensile tests were conducted on a GLEEBLE-3500 isothermal simulator at temperatures of 380-440℃and strain rates of 0.05-1 s^(−1).The Johnson-Cook model,Hensel-Spittel model,strain-compensated Arrhenius model,and critical fracture strain model were established.Results show that through the evaluation of the models using the correlation coefficient(R)and the average absolute relative error,the strain-compensated Arrhenius model can represent the flow behavior of the alloy more accurately.Shear bands are more pronounced in the as-homogenized specimens,whereas dynamic recrystallization is predominantly observed in as-rolled specimens.Fracture morphology analysis reveals that a mixed fracture mechanism is prevalent in the as-homogenized specimen,whereas a ductile fracture mechanism is predominant in the as-rolled specimen.The processing maps indicate that the unstable region is reduced in the as-rolled specimens compared with that in the as-homogenized specimens.The optimal hot working windows for the as-homogenized and as-rolled specimens are determined as 410-440℃/0.14-1 s^(−1)and 380-400℃/0.05-0.29 s^(−1),respectively.展开更多
Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively invest...Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively investigated.Macroscopic morphology,microstructure,and interfacial structure of the joints were analyzed using scanning electron microscope,energy dispersive spectrometer,and X-ray diffractometer(XRD).The results show that magnetic pulse welding of dissimilar Mg/Fe metals is achieved using an Al interlayer,which acts as a bridge for deformation and diffusion.Specifically,the AZ31B/AA1060 interface exhibits a typical wavy morphology,and a transition zone exists at the joint interface,which may result in an extremely complex microstructure.The microstructure of this transition zone differs from that of AZ31B magnesium and 1060 Al alloys,and it is identified as brittle intermetallic compounds(IMCs)Al_(3)Mg_(2) and Al_(12)Mg_(17).The transition zone is mainly distributed on the Al side,with the maximum thickness of Al-side transition layer reaching approximately 13.53μm.Incomplete melting layers with varying thicknesses are observed at the primary weld interface,while micron-sized hole defects appear in the transition zone of the secondary weld interface.The AA1060/DC56D interface is mainly straight,with only a small number of discontinuous transition zones distributed intermittently along the interface.These transition zones are characterized by the presence of the brittle IMC FeAl_(3),with a maximum thickness of about 4μm.展开更多
The accurate establishment of a ferrite transformation start temperature model is crucial to design a reasonable controlled rolling process and ensure uniform microstructure in aluminum bearing dual-phase steel.The me...The accurate establishment of a ferrite transformation start temperature model is crucial to design a reasonable controlled rolling process and ensure uniform microstructure in aluminum bearing dual-phase steel.The measurements of the expansion-temperature curves of aluminum bearing dual-phase steel under continuous cooling and isothermal conditions are presented,utilizing a dynamic transformation dilatometer experiment.Based on these expansion-temperature curves,the start temperature and incubation time of ferrite transformation were determined,elucidating the influence of process parameters on both the incubation time and the start temperature of ferrite transformation.By integrating metallurgical principles with measured incubation time of ferrite transformation,and considering the effects of temperature and strain,a fitting model for the variation in volume free energy during ferrite nucleation was derived.Building upon this foundation,a high-precision incubation time of ferrite transformation mathematical model for the experimental steel was established.To more accurately calculate the start temperature of ferrite transformation under continuous cooling conditions,the Scheil’s additivity rule was modified to account for the effects of deformation and cooling rate.The results indicate that the modification coefficient decreases with increasing the cooling rate and strain,thereby significantly improving the accuracy of calculating the starting temperature of ferrite transformation using the modified additivity rule.展开更多
In current research,Li_(2)O-Al_(2)O_(3)-SiO_(2)glass-ceramics were prepared by conventional meltquenching and subsequent heat treatment method.The effect of Al_(2)O_(3)content on microstructures,thermal properties,cry...In current research,Li_(2)O-Al_(2)O_(3)-SiO_(2)glass-ceramics were prepared by conventional meltquenching and subsequent heat treatment method.The effect of Al_(2)O_(3)content on microstructures,thermal properties,crystallization behaviours and mechanical properties were investigated.FTIR,Raman spectroscopy and nuclear magnetic resonance spectroscopy microstructure analysis showed that the silico-oxygen network was damaged,while the increase of[AlO_(4)]content repaired the glass network,and finally made the glass network have better connectivity,with the decrease of SiO_(2).The thermal analysis confirmed the increasing glass transition and crystallization temperatures from growing Al_(2)O_(3)content.In addition,different crystal phases can be precipitated in the glass matrix,such as LiAlSi_(4)O_(10),Li_(2)Si_(2)O_(5) in glass with low Al_(2)O_(3)content,the combination of Li_xAl_xSi_(1-x)O_(2),LiAlSi_(3)O_(8),Li_(2)SiO_(3)in glass with intermediate Al_(2)O_(3)content,and the combination of LiAlSi_(2)O_(6),SiO_(2)in glass with high Al_(2)O_(3)content.The hardness of as-prepared glass gradually increases with the increase of the Al_(2)O_(3)content.The Vickers hardness of the glass-ceramics is highly dependent on the Al_(2)O_(3)content in the glass and the heat treatment temperatures,reaching a maximum of 10.11 GPa.Scanning electron microscope images show that the crystals change from spherical to massive and finally to sheet.The change of glass structure,crystal phase and morphology is the main reason for the different mechanical properties.展开更多
Heterogeneous nucleation,characterized by its low nucleation barrier and controllable nucleation sites,has been widely employed to manipulate the microstructures and properties of metallic materials.In recent years,th...Heterogeneous nucleation,characterized by its low nucleation barrier and controllable nucleation sites,has been widely employed to manipulate the microstructures and properties of metallic materials.In recent years,the dispersion of inclusions,carbides,and microstructure refinement in steel have emerged as one of the key research directions in the development of high-quality steel.The current research status regarding the regulation of inclusions,carbides,and microstructures in steel through heterogeneous nucleation are reviewed.The key points and challenges in refining the second phase and microstructure in steel using inclusion particles are highlighted,aiming to provide inspiration and references for future scholars.Deoxidized inclusions,when refined and dispersed,exhibit favorable lattice matching with second phases(e.g.,nitrides,sulfides,carbides)in steel.This characteristic serves as the fundamental mechanism for achieving refinement of the second phase.Concurrently,the solid-solution alloying effect from deoxidizing metals contributes to second-phase refinement,an aspect that requires prioritized investigation.In addition to the single heterogeneous nucleation refinement effect,the two-stage heterogeneous nucleation refinement of the second phase and microstructure offers a new approach for follow-up research.Notably,second-phase particles added as heterogeneous nucleation sites via external addition often require surface modification to ensure their stable retention in steel at high temperatures,which remains a major challenge restricting the widespread application of this method.Currently,the explanation of heterogeneous nucleation phenomena primarily relies on empirical calculations of lattice mismatch between the substrate and the nucleating phase,which cannot fully elucidate the quantitative relationship on the interface between the substrate and the nucleation phase.On this basis,quantifying the electronic structure and nucleation barrier at the interface between the substrate and the nucleation phase is a critical direction worthy of increased attention in the future.展开更多
Cryogenic rolling impacts on microstructure and mechanical properties of spray-formed 7055(SF-7055)Al alloy were investigated.Results show that with the increase of the reduction from 20%to 80%,the grain of cryogenic ...Cryogenic rolling impacts on microstructure and mechanical properties of spray-formed 7055(SF-7055)Al alloy were investigated.Results show that with the increase of the reduction from 20%to 80%,the grain of cryogenic rolled SF-7055 Al alloy is elongated to form a fiber texture.Numerous proliferating dislocations in the microstructure accumulate into dislocation walls and cells,and eventually form subgrains.These subgrain boundaries divide the original grain,thereby reducing the grain size.Under severe deformation conditions,they even enable the formation of nanograins.Meanwhile,the Cu-rich precipitates in the matrix are also broken and refined under the action of large rolling stress.In the process of cryogenic rolling,the tensile strength and hardness of SF-7055 Al alloy gradually increase,while the plasticity decreases.Moreover,the fracture morphology of cryogenic rolled SF-7055 Al alloy gradually transforms to the ductile and quasi-cleavage hybrid fracture characteristics with increased reduction.展开更多
The microstructure of high Nb-TiAl alloys was optimized by the addition of a small amount of Ta elements to further improve their properties.A series of Ti46Al1.5Cr8Nb-xTa(x=0.2,0.4,0.6,0.8,1.0,at.%)alloys were prepar...The microstructure of high Nb-TiAl alloys was optimized by the addition of a small amount of Ta elements to further improve their properties.A series of Ti46Al1.5Cr8Nb-xTa(x=0.2,0.4,0.6,0.8,1.0,at.%)alloys were prepared by vacuum arc melting.The microstructure,mechanical properties,and related influencing mechanisms were systematically investigated.The results indicate that the solidification microstructure of the Ti46Al1.5Cr8Nb-xTa alloys comprises theγ-TiAl phase,α_(2)-Ti_(3)Al phase,and B2 phase.As the Ta content increases from 0.2 at.%to 1.0 at.%,the content ofα_(2)phase and B2 phase increases,while theγphase content decreases.Among them,the B2 phase shows the most pronounced change,being significantly refined,with its content increasing from 12.49%to 21.91%.In addition,the average size of the lamellar colony decreases from 160.65 to 94.44μm.The addition of the Ta element shifts the solidification path toward lower aluminum concentrations,leading to changes in phase content.The tantalum-induced increase in the B2 phase and enhanced supercooling at the solidification front provide the basis for lamellar colony refinement.Compressive testing at room temperature reveals that the Ti46 Al1.5 Cr8 Nb0.4 Ta alloy exhibits optimal compressive properties,achieving a compressive strength of 2,434 MPa and a compressive strain of 33.1%.The improvement of its properties is attributed to a combination of lamellar colony refinement,solid solution strengthening resulting from the incorporation of Ta element,and a reduction in the c/a of theγphase.展开更多
Quantitative analysis of aluminum-silicon(Al-Si)alloy microstructure is crucial for evaluating and controlling alloy performance.Conventional analysis methods rely on manual segmentation,which is inefficient and subje...Quantitative analysis of aluminum-silicon(Al-Si)alloy microstructure is crucial for evaluating and controlling alloy performance.Conventional analysis methods rely on manual segmentation,which is inefficient and subjective,while fully supervised deep learning approaches require extensive and expensive pixel-level annotated data.Furthermore,existing semi-supervised methods still face challenges in handling the adhesion of adjacent primary silicon particles and effectively utilizing consistency in unlabeled data.To address these issues,this paper proposes a novel semi-supervised framework for Al-Si alloy microstructure image segmentation.First,we introduce a Rotational Uncertainty Correction Strategy(RUCS).This strategy employs multi-angle rotational perturbations andMonte Carlo sampling to assess prediction consistency,generating a pixel-wise confidence weight map.By integrating this map into the loss function,the model dynamically focuses on high-confidence regions,thereby improving generalization ability while reducing manual annotation pressure.Second,we design a Boundary EnhancementModule(BEM)to strengthen boundary feature extraction through erosion difference and multi-scale dilated convolutions.This module guides the model to focus on the boundary regions of adjacent particles,effectively resolving particle adhesion and improving segmentation accuracy.Systematic experiments were conducted on the Aluminum-Silicon Alloy Microstructure Dataset(ASAD).Results indicate that the proposed method performs exceptionally well with scarce labeled data.Specifically,using only 5%labeled data,our method improves the Jaccard index and Adjusted Rand Index(ARI)by 2.84 and 1.57 percentage points,respectively,and reduces the Variation of Information(VI)by 8.65 compared to stateof-the-art semi-supervised models,approaching the performance levels of 10%labeled data.These results demonstrate that the proposed method significantly enhances the accuracy and robustness of quantitative microstructure analysis while reducing annotation costs.展开更多
The rapid advancements in computer vision(CV)technology have transformed the traditional approaches to material microstructure analysis.This review outlines the history of CV and explores the applications of deep-lear...The rapid advancements in computer vision(CV)technology have transformed the traditional approaches to material microstructure analysis.This review outlines the history of CV and explores the applications of deep-learning(DL)-driven CV in four key areas of materials science:microstructure-based performance prediction,microstructure information generation,microstructure defect detection,and crystal structure-based property prediction.The CV has significantly reduced the cost of traditional experimental methods used in material performance prediction.Moreover,recent progress made in generating microstructure images and detecting microstructural defects using CV has led to increased efficiency and reliability in material performance assessments.The DL-driven CV models can accelerate the design of new materials with optimized performance by integrating predictions based on both crystal and microstructural data,thereby allowing for the discovery and innovation of next-generation materials.Finally,the review provides insights into the rapid interdisciplinary developments in the field of materials science and future prospects.展开更多
The laser-clad Fe45 alloy coating inherently comprises multiple crystalline phases,resulting in a heterogeneous microstructural distribution that influences its performance.In this study,the rare earth yttria(Y_(2)O_(...The laser-clad Fe45 alloy coating inherently comprises multiple crystalline phases,resulting in a heterogeneous microstructural distribution that influences its performance.In this study,the rare earth yttria(Y_(2)O_(3))was employed to modify laser-clad Fe45 alloy coatings,and the effects of Y_(2)O_(3) addition on their microstructure,microhardness,and tribological properties were investigated.As the Y_(2)O_(3) content increases from 0%to 0.3wt.%,the dominant microstructure transforms from columnar crystals to fine cellular and equiaxed crystals.The modified coating with 0.3wt.%Y_(2)O_(3) achieves a surface hardness of 568 HV_(0.3)and a wear volume of 1,735.41 um~3,representing a 14.06%increase in hardness and a 51.16%reduction in wear volume compared to the undoped coating.Further increasing the Y_(2)O_(3) content from 0.3wt.%to 0.9wt.%gradually leads to the emergence of a coarser feather-like microstructure,characterized by a dendritic framework with inter-dendritic equiaxed crystals.Concurrently,both the hardness and wear resistance of the coating decrease.Nevertheless,all Y_(2)O_(3)-modified coatings surpass the undoped Fe45 coating in both hardness and wear resistance.Appropriate Y_(2)O_(3) doping effectively refines the Fe45 alloy coating's microstru cture and induces lattice distortion,thereby enhancing its hardness and wear resistance.展开更多
Al-Si-Cu-Mg alloy demonstrates a significant age-hardening effect,with its mechanical properties tunable by optimizing the aging parameters.To enhance this effect,the as-cast Al-8.5Si-2Cu-0.9Mg alloy was subjected to ...Al-Si-Cu-Mg alloy demonstrates a significant age-hardening effect,with its mechanical properties tunable by optimizing the aging parameters.To enhance this effect,the as-cast Al-8.5Si-2Cu-0.9Mg alloy was subjected to either single-stage aging at temperatures of 150℃,175℃,200℃,and 225℃for 0.5 h to 20 h;or double-stage aging:involving a first-stage aging treatment at 120℃for 1 h,3 h,5 h,or 7 h,followed by a second-stage aging treatment at 175℃ for 0.5 h to 20 h.The microstructure and mechanical properties were evaluated for samples aged at 175℃/7 h,175℃/10 h,120℃/5 h+175℃/5 h,and 120℃/5 h+175℃/8 h.XRD analysis reveals that the as-cast Al-8.5Si-2Cu-0.9Mg alloy consists of theα-Al,Si,θ-Al_(2)Cu,and Q-Al_(5)Cu_(2)Mg_8Si_6phases.The aging kinetics exhibit a double-peak behavior in both single-stage and double-stage aging processes.Under single-stage aging at 175℃/x h and double-stage aging(120℃/5 h+175℃/x h),the precipitates'size at the first peak is smaller than that at the second peak.Compared with single-stage aging(175℃/7 h),double-stage aging(120℃/5 h+175℃/5 h)produces a finer precipitate in the alloy.Theoretical calculations indicate that the number density and nucleation rate of both the Al_(5)Cu_(2)Mg_8Si_6 and Al_(2)Cu phases are higher during the double-stage aging(120℃/5 h+175℃/5 h)than those during the single-stage aging(175℃/7 h).Additionally,tensile tests at both room temperature and 250℃demonstrate that double-stage aging(120℃/5 h+175℃/5 h)significantly improves the mechanical properties of the alloy compared to single-stage aging(175℃/7 h),suggesting that double-stage aging is more effective for enhancing mechanical properties for this alloy.展开更多
The age-hardening response,mechanical,and corrosion-resistant properties of AA7085 alloys with and without the addition of 0.3 wt.%scandium(Sc)were compared.Using advanced techniques such as aberration-corrected trans...The age-hardening response,mechanical,and corrosion-resistant properties of AA7085 alloys with and without the addition of 0.3 wt.%scandium(Sc)were compared.Using advanced techniques such as aberration-corrected transmission electron microscopy and first-principles calculations,the underlying micromechanisms of Sc microalloying were revealed.Results show that the increase in strength of the AA7085-Sc alloy is mainly attributed to the decreased Al grain size and increased number density of both Al_(3)Sc@Al_(3)(Sc,Zr)core−shell nanoparticles and Sc-containingη_(p) and GP−η_(p) nanoprecipitates.Strong strain fields and evident electron transfer from Zr to the neighboring matrix Al atoms exist at the Al_(3)Sc@Al_(3)(Sc,Zr)/Al interface.The Sc doping in GP−η_(p) andη_(p) suppresses the GP−η_(p)→η_(p) transformation.Modified corrosion resistance of the AA7085-Sc alloy compared with AA7085 alloy is associated with the fine grain boundary precipitates ofη_(p)hases and narrow precipitation free zone.The reasons of property changes of AA7085 alloy after Sc microalloying are explored based on the multiscale microstructural characterization.展开更多
文摘Multi-phase microstructures having good ductility may replace the conventional microstructures in different technological applications such as pressure vessels.Mechanical properties including the fracture behavior and the service life of pressure vessels are strongly affected by the microstructure.The objective of this study was to investigate the correlation between different dual-phase microstructures and mechanical properties of 42CrMo4 (AISI 4140) steel.To produce the martensite-bainite (M-B),the martensite-ferrite (M-F),and the ferrite-bainite (F-B) microstructures,the step quenching heat treatment was used.Mechanical properties of heat treated samples including the strength,ductility,and impact energy were measured.Tensile experiments revealed a discontinuous yielding in the F-B specimen with ferritic matrix.Fracto\graphic results showed high concentration bright facets (BFs) on broken specimen surfaces indicating the brittle cleavage fracture was the predominant mechanism in the dual-phase microstructures.
基金the Fundamental Research Funds for the Central Universities(NO.2018CDPTCG0001/42)National Special Support Program for High-Level Personnel RecruitmentGDAS’Project of Science and Technology Development(No.2020GDASYL-20200102030)。
文摘The simultaneous enhancement of magnetic and mechanical properties is desirable but challenging for soft-magnetic materials.A fabrication strategy to meet this requirement is therefore in high demand.Herein,bulk equiatomic dual-phase AlCoFeMnNi high-entropy alloys were fabricated via a magnetic levitation induction melting and casting process followed by annealing at 700-1000℃,and their microstructures as well as mechanical and magnetic properties were investigated.The as-cast alloy possessed a single metastable B2-ordered solid solution that decomposed upon annealing into a dual-phase structure comprising an Al-and Ni-rich body-centered cubic(BCC)matrix and Fe-and Mn-rich face-centered cubic(FCC)precipitates both in the grain interior and along the grain boundaries.The magnetic and mechanical properties were closely related to the relative volume fraction of FCC in the alloy.The FCC volume fraction could be increased by increasing the annealing temperature,thereby offering tunable properties.The optimal annealing temperature for balanced magnetic and mechanical properties was found to be 800℃.The alloy annealed at this temperature had an average BCC grain size of 12±3μm and FCC volume fraction of 41±4%.Correspondingly,the s aturation magnetization and coercivity reached 82.57 Am^2/kg and 433 A/m,respectively.The compressive yield strength and fracture strength were 1022 and 2539 MPa,respectively,and the plasticity was 33%.Owing to its adjustable microstructure and properties,the AlCoFeMnNi alloy has potential for use as a multi-functional soft-magnetic material.
文摘Continuous annealing simulation is used in studying the influence of continuous annealing process parameters on the microstructure and mechanical properties of a GPa-grade C-Si-Mn-Cr-Mo dual-phase steel.The experimental results indicate that increasing soaking time increases the volume fraction of martensite and the size of martensite islands, as well as tensile strength(TS) and yield strength(YS),while decreasing plasticity.As the steel slowly cools to a lower temperature prior to final quenching, TS and YS decrease, whereas elongation increases.The decrease in martensite content is due to the partial decomposition of austenite into ferrite during long slow cooling before quenching.As overaging temperature increases because of the tempering of martensite and aging of ferrite, TS decreases and YS increases.Work hardening analysis shows that in the initial stage of deformation, low overaging temperatures enhance work hardening ability.
基金supported by HBIS Group under the Grant No.IRIS 200506003.
文摘Different stress states have a significant influence on the magnitude of the microscopic plastic strain and result in the development of the microstructure evolution.As a result,a comprehensive understanding of the different scale variation on microstructure evolution during bending deformation is essential.The advanced high strength dual-phase(DP1180)steel was investigated using multiscale microstructure-based 3D representative volume element(RVE)modelling technology with emphasis on understanding the relationship between the microstructure,localised stress-strain evolution as well as the deformation characteristics in the bending process.It is demonstrated that the localised development in bending can be more accurately described by microscopic deformation when taking into account microstructural properties.Microstructure-based 3D RVEs from each chosen bending condition generally have comparable localisation properties,whilst the magnitudes and intensities differ.In addition,the most severe localised bands are predicted to occur close to the ferrite and martensite phase boundaries where the martensite grains are close together or have a somewhat sharp edge.The numerically predicted results for the microstructure evolution,shear bands development and stress and strain distribution after 3-point bending exhibit a good agreement with the relevant experimental observations.
文摘Effects of intercritical annealing temperature on microstructures and mechanical properties of ultrahigh-strength dual-phase(DP) steel were investigated.Results reveal that the volume fraction of martensite increases as the intercritical annealing temperature increases.Under optimal annealing conditions, the DP steel exhibited a microstructure comprising nearly equiaxed ferrite with uniformly distributed martensite islands.Variations in micro-hardness, strength, elongation, and fracture mechanisms were closely linked to the corresponding microstructural features.
基金financially supported by the National Defense Basic Research Program(No.JCKY2023204A005)Project of High Modulus Magnesium Alloy Forgings(JXXT-2023-014hbza)+1 种基金Research Program of Joint Research Center of Advanced Spaceflight Technologies(No.USCAST2023-3)Major Scientific and Technological Innovation Project of Luoyang(No.2201029A).
文摘Nearly undamaged joints of electron beam welded(EBW)dual-phase Mg-8Li-3Al-2Zn-0.5Y alloy were achieved with joint coefficients exceeding 95%.All specimens were fractured at the base metal(BM),implying a significant departure from conventional fracture modes of welded joints.The fusion zone(FZ)consists of ultrafine acicular α-Mg and equiaxed β-Li,with grain sizes reduced by approximately 90% and 80%,respectively,compared to the base metal.This results in a significant increase in microhardness of about 40%.A unique multiphase mixture was observed in the heat-affected zone(HAZ),which mainly consists of lamellar eutectoid structures,fine precipitates zone,and numerous fine Mg_(3)(Al,Zn)particles.This mixture was transformed from typical Li(Al,Zn)(a common softening phase)undergoing atomic diffusion and solid-state phase transformation during welding.It introduces a synergistic strengthening effect,making the heat-affected zone no longer the weakest part of the joint.This study provides valuable insights into the electron beam welding technology for Mg-Li alloys and offers theoretical support for manufacturing high-quality joints.
基金supported by the National Natural Science Foundation(Grant No.51532006)the National Bureau of Foreign Experts(111 Project No.D16002)。
文摘The A2B2O7 series of ternary oxides are derivatives of fluorite structure over a wide range of rA/rB.Competing by two rare-earths the A-site,La2-xLuxZr2O7 ceramics were found transparent only in pore-free microstructures with similar grain sizes of pyrochlore(PY)and defective fluorite(DF)phases.Mutual solubilities of Lu and La in both phases were found by imaging and energy-dispersive spectroscopy analysis in scanning electron microscope.The dual-phase microstructures were developed with liquid-phase resulted from the exothermal reactions,creating a miscibility gap between two structures to moderate their competing grain growth.Change in grain growth behaviors in liquid-phase is described by a nucleation line in La2Zr2O7-Lu2Zr2O7 phase diagram.Variations of solution levels in DF grains and co-existing of dual-phase grain clusters in common orientation were revealed in transparent ceramics by electron backscattered diffraction,resulted by epitaxial relation of two phases promoted by the liquid-phase.Oxygen vacancies and various hole states common in both phases were revealed by characteristic cathodoluminescence peaks.The collective effects of pores,phase and grain boundaries,oxygen vacancies on scattering or absorption of visible light enables to establish a hierarchical microstructure-transparency relationship in such complex oxide ceramics,which could be tailored or further optimized by controllable sintering.
基金National Natural Science Foundation of China(51801227,52071331)。
文摘The influence of homogenization parameters on element segregation,dendritic structure,and the precipitate evolution in the GH3535-0.08wt%Y alloy was investigated.Additionally,some specific homogenization parameters were maintained constant throughout the experiments.Results indicate that the heat treatment at 1150℃for 10 h is the optimal homogenization condition.Following this optimal treatment,dendrite structures and element segregation are eliminated.Furthermore,both SiC and Y_(5)Si_(3)precipitates in the as-cast alloy decrease significantly.Conversely,the homogenization at 1188℃induces overheating defects within the alloy.Although SiC and Y_(5)Si_(3)phases also decrease,some large M6C phases can still be observed,adversely affecting subsequent forging processes.
文摘To investigate the influence of Al-Zn-Mg-Cu alloy with as-homogenized and as-rolled initial microstructures on the tensile flow behavior,isothermal tensile tests were conducted on a GLEEBLE-3500 isothermal simulator at temperatures of 380-440℃and strain rates of 0.05-1 s^(−1).The Johnson-Cook model,Hensel-Spittel model,strain-compensated Arrhenius model,and critical fracture strain model were established.Results show that through the evaluation of the models using the correlation coefficient(R)and the average absolute relative error,the strain-compensated Arrhenius model can represent the flow behavior of the alloy more accurately.Shear bands are more pronounced in the as-homogenized specimens,whereas dynamic recrystallization is predominantly observed in as-rolled specimens.Fracture morphology analysis reveals that a mixed fracture mechanism is prevalent in the as-homogenized specimen,whereas a ductile fracture mechanism is predominant in the as-rolled specimen.The processing maps indicate that the unstable region is reduced in the as-rolled specimens compared with that in the as-homogenized specimens.The optimal hot working windows for the as-homogenized and as-rolled specimens are determined as 410-440℃/0.14-1 s^(−1)and 380-400℃/0.05-0.29 s^(−1),respectively.
文摘Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively investigated.Macroscopic morphology,microstructure,and interfacial structure of the joints were analyzed using scanning electron microscope,energy dispersive spectrometer,and X-ray diffractometer(XRD).The results show that magnetic pulse welding of dissimilar Mg/Fe metals is achieved using an Al interlayer,which acts as a bridge for deformation and diffusion.Specifically,the AZ31B/AA1060 interface exhibits a typical wavy morphology,and a transition zone exists at the joint interface,which may result in an extremely complex microstructure.The microstructure of this transition zone differs from that of AZ31B magnesium and 1060 Al alloys,and it is identified as brittle intermetallic compounds(IMCs)Al_(3)Mg_(2) and Al_(12)Mg_(17).The transition zone is mainly distributed on the Al side,with the maximum thickness of Al-side transition layer reaching approximately 13.53μm.Incomplete melting layers with varying thicknesses are observed at the primary weld interface,while micron-sized hole defects appear in the transition zone of the secondary weld interface.The AA1060/DC56D interface is mainly straight,with only a small number of discontinuous transition zones distributed intermittently along the interface.These transition zones are characterized by the presence of the brittle IMC FeAl_(3),with a maximum thickness of about 4μm.
基金supported by the National Science and Technology Major Project-Intelligent Manufacturing Systems And Robots(2025ZD1602200)the National Key Research and Development Program of China(Grant No.2022YFB3304800).
文摘The accurate establishment of a ferrite transformation start temperature model is crucial to design a reasonable controlled rolling process and ensure uniform microstructure in aluminum bearing dual-phase steel.The measurements of the expansion-temperature curves of aluminum bearing dual-phase steel under continuous cooling and isothermal conditions are presented,utilizing a dynamic transformation dilatometer experiment.Based on these expansion-temperature curves,the start temperature and incubation time of ferrite transformation were determined,elucidating the influence of process parameters on both the incubation time and the start temperature of ferrite transformation.By integrating metallurgical principles with measured incubation time of ferrite transformation,and considering the effects of temperature and strain,a fitting model for the variation in volume free energy during ferrite nucleation was derived.Building upon this foundation,a high-precision incubation time of ferrite transformation mathematical model for the experimental steel was established.To more accurately calculate the start temperature of ferrite transformation under continuous cooling conditions,the Scheil’s additivity rule was modified to account for the effects of deformation and cooling rate.The results indicate that the modification coefficient decreases with increasing the cooling rate and strain,thereby significantly improving the accuracy of calculating the starting temperature of ferrite transformation using the modified additivity rule.
基金Funded by the National Key Research Program(No.2024-1129-954-112)National Natural Science Foundation of China(No.52372033)Guangxi Science and Technology Major Program(No.AA24263054)。
文摘In current research,Li_(2)O-Al_(2)O_(3)-SiO_(2)glass-ceramics were prepared by conventional meltquenching and subsequent heat treatment method.The effect of Al_(2)O_(3)content on microstructures,thermal properties,crystallization behaviours and mechanical properties were investigated.FTIR,Raman spectroscopy and nuclear magnetic resonance spectroscopy microstructure analysis showed that the silico-oxygen network was damaged,while the increase of[AlO_(4)]content repaired the glass network,and finally made the glass network have better connectivity,with the decrease of SiO_(2).The thermal analysis confirmed the increasing glass transition and crystallization temperatures from growing Al_(2)O_(3)content.In addition,different crystal phases can be precipitated in the glass matrix,such as LiAlSi_(4)O_(10),Li_(2)Si_(2)O_(5) in glass with low Al_(2)O_(3)content,the combination of Li_xAl_xSi_(1-x)O_(2),LiAlSi_(3)O_(8),Li_(2)SiO_(3)in glass with intermediate Al_(2)O_(3)content,and the combination of LiAlSi_(2)O_(6),SiO_(2)in glass with high Al_(2)O_(3)content.The hardness of as-prepared glass gradually increases with the increase of the Al_(2)O_(3)content.The Vickers hardness of the glass-ceramics is highly dependent on the Al_(2)O_(3)content in the glass and the heat treatment temperatures,reaching a maximum of 10.11 GPa.Scanning electron microscope images show that the crystals change from spherical to massive and finally to sheet.The change of glass structure,crystal phase and morphology is the main reason for the different mechanical properties.
基金supported by the National Natural Science Foundation of China(No.52304358)Young Elite Scientists Sponsorship Program by CAST(No.YESS20230462).
文摘Heterogeneous nucleation,characterized by its low nucleation barrier and controllable nucleation sites,has been widely employed to manipulate the microstructures and properties of metallic materials.In recent years,the dispersion of inclusions,carbides,and microstructure refinement in steel have emerged as one of the key research directions in the development of high-quality steel.The current research status regarding the regulation of inclusions,carbides,and microstructures in steel through heterogeneous nucleation are reviewed.The key points and challenges in refining the second phase and microstructure in steel using inclusion particles are highlighted,aiming to provide inspiration and references for future scholars.Deoxidized inclusions,when refined and dispersed,exhibit favorable lattice matching with second phases(e.g.,nitrides,sulfides,carbides)in steel.This characteristic serves as the fundamental mechanism for achieving refinement of the second phase.Concurrently,the solid-solution alloying effect from deoxidizing metals contributes to second-phase refinement,an aspect that requires prioritized investigation.In addition to the single heterogeneous nucleation refinement effect,the two-stage heterogeneous nucleation refinement of the second phase and microstructure offers a new approach for follow-up research.Notably,second-phase particles added as heterogeneous nucleation sites via external addition often require surface modification to ensure their stable retention in steel at high temperatures,which remains a major challenge restricting the widespread application of this method.Currently,the explanation of heterogeneous nucleation phenomena primarily relies on empirical calculations of lattice mismatch between the substrate and the nucleating phase,which cannot fully elucidate the quantitative relationship on the interface between the substrate and the nucleation phase.On this basis,quantifying the electronic structure and nucleation barrier at the interface between the substrate and the nucleation phase is a critical direction worthy of increased attention in the future.
基金financially and technically supported by the National Key Laboratory Foundation of Science and Technology on Materials under Shock and Impact,Beijing Institute of Technology,China(No.WDZC2024-1)。
文摘Cryogenic rolling impacts on microstructure and mechanical properties of spray-formed 7055(SF-7055)Al alloy were investigated.Results show that with the increase of the reduction from 20%to 80%,the grain of cryogenic rolled SF-7055 Al alloy is elongated to form a fiber texture.Numerous proliferating dislocations in the microstructure accumulate into dislocation walls and cells,and eventually form subgrains.These subgrain boundaries divide the original grain,thereby reducing the grain size.Under severe deformation conditions,they even enable the formation of nanograins.Meanwhile,the Cu-rich precipitates in the matrix are also broken and refined under the action of large rolling stress.In the process of cryogenic rolling,the tensile strength and hardness of SF-7055 Al alloy gradually increase,while the plasticity decreases.Moreover,the fracture morphology of cryogenic rolled SF-7055 Al alloy gradually transforms to the ductile and quasi-cleavage hybrid fracture characteristics with increased reduction.
基金the financial support by the Major Science and Technology Achievement Transformation Project in Heilongjiang Province(No.ZC2023SH0075)the National Natural Science Foundation of China(Nos.52425401,U2441255,52474377,and 52371015)+1 种基金the Young Elite Scientists Sponsorship·Program by CAST(No.2021QNRC001)the Henan Provincial Key Research and Development&Promotion Special Program(No.251111231400)。
文摘The microstructure of high Nb-TiAl alloys was optimized by the addition of a small amount of Ta elements to further improve their properties.A series of Ti46Al1.5Cr8Nb-xTa(x=0.2,0.4,0.6,0.8,1.0,at.%)alloys were prepared by vacuum arc melting.The microstructure,mechanical properties,and related influencing mechanisms were systematically investigated.The results indicate that the solidification microstructure of the Ti46Al1.5Cr8Nb-xTa alloys comprises theγ-TiAl phase,α_(2)-Ti_(3)Al phase,and B2 phase.As the Ta content increases from 0.2 at.%to 1.0 at.%,the content ofα_(2)phase and B2 phase increases,while theγphase content decreases.Among them,the B2 phase shows the most pronounced change,being significantly refined,with its content increasing from 12.49%to 21.91%.In addition,the average size of the lamellar colony decreases from 160.65 to 94.44μm.The addition of the Ta element shifts the solidification path toward lower aluminum concentrations,leading to changes in phase content.The tantalum-induced increase in the B2 phase and enhanced supercooling at the solidification front provide the basis for lamellar colony refinement.Compressive testing at room temperature reveals that the Ti46 Al1.5 Cr8 Nb0.4 Ta alloy exhibits optimal compressive properties,achieving a compressive strength of 2,434 MPa and a compressive strain of 33.1%.The improvement of its properties is attributed to a combination of lamellar colony refinement,solid solution strengthening resulting from the incorporation of Ta element,and a reduction in the c/a of theγphase.
基金funded by the National Natural Science Foundation of China (52061020).
文摘Quantitative analysis of aluminum-silicon(Al-Si)alloy microstructure is crucial for evaluating and controlling alloy performance.Conventional analysis methods rely on manual segmentation,which is inefficient and subjective,while fully supervised deep learning approaches require extensive and expensive pixel-level annotated data.Furthermore,existing semi-supervised methods still face challenges in handling the adhesion of adjacent primary silicon particles and effectively utilizing consistency in unlabeled data.To address these issues,this paper proposes a novel semi-supervised framework for Al-Si alloy microstructure image segmentation.First,we introduce a Rotational Uncertainty Correction Strategy(RUCS).This strategy employs multi-angle rotational perturbations andMonte Carlo sampling to assess prediction consistency,generating a pixel-wise confidence weight map.By integrating this map into the loss function,the model dynamically focuses on high-confidence regions,thereby improving generalization ability while reducing manual annotation pressure.Second,we design a Boundary EnhancementModule(BEM)to strengthen boundary feature extraction through erosion difference and multi-scale dilated convolutions.This module guides the model to focus on the boundary regions of adjacent particles,effectively resolving particle adhesion and improving segmentation accuracy.Systematic experiments were conducted on the Aluminum-Silicon Alloy Microstructure Dataset(ASAD).Results indicate that the proposed method performs exceptionally well with scarce labeled data.Specifically,using only 5%labeled data,our method improves the Jaccard index and Adjusted Rand Index(ARI)by 2.84 and 1.57 percentage points,respectively,and reduces the Variation of Information(VI)by 8.65 compared to stateof-the-art semi-supervised models,approaching the performance levels of 10%labeled data.These results demonstrate that the proposed method significantly enhances the accuracy and robustness of quantitative microstructure analysis while reducing annotation costs.
基金financially supported by the National Science Fund for Distinguished Young Scholars,China(No.52025041)the National Natural Science Foundation of China(Nos.52450003,U2341267,and 52174294)+1 种基金the National Postdoctoral Program for Innovative Talents,China(No.BX20240437)the Fundamental Research Funds for the Central Universities,China(Nos.FRF-IDRY-23-037 and FRF-TP-20-02C2)。
文摘The rapid advancements in computer vision(CV)technology have transformed the traditional approaches to material microstructure analysis.This review outlines the history of CV and explores the applications of deep-learning(DL)-driven CV in four key areas of materials science:microstructure-based performance prediction,microstructure information generation,microstructure defect detection,and crystal structure-based property prediction.The CV has significantly reduced the cost of traditional experimental methods used in material performance prediction.Moreover,recent progress made in generating microstructure images and detecting microstructural defects using CV has led to increased efficiency and reliability in material performance assessments.The DL-driven CV models can accelerate the design of new materials with optimized performance by integrating predictions based on both crystal and microstructural data,thereby allowing for the discovery and innovation of next-generation materials.Finally,the review provides insights into the rapid interdisciplinary developments in the field of materials science and future prospects.
基金supported by the Jiangxi Provincial Natural Science Foundation of China(Grant number 20224BAB204049)the Fund Project of Jiangxi Provincial Department of Education(Grant number GJJ2200602)the National Natural Science Foundation of China(Grant number 52205194)。
文摘The laser-clad Fe45 alloy coating inherently comprises multiple crystalline phases,resulting in a heterogeneous microstructural distribution that influences its performance.In this study,the rare earth yttria(Y_(2)O_(3))was employed to modify laser-clad Fe45 alloy coatings,and the effects of Y_(2)O_(3) addition on their microstructure,microhardness,and tribological properties were investigated.As the Y_(2)O_(3) content increases from 0%to 0.3wt.%,the dominant microstructure transforms from columnar crystals to fine cellular and equiaxed crystals.The modified coating with 0.3wt.%Y_(2)O_(3) achieves a surface hardness of 568 HV_(0.3)and a wear volume of 1,735.41 um~3,representing a 14.06%increase in hardness and a 51.16%reduction in wear volume compared to the undoped coating.Further increasing the Y_(2)O_(3) content from 0.3wt.%to 0.9wt.%gradually leads to the emergence of a coarser feather-like microstructure,characterized by a dendritic framework with inter-dendritic equiaxed crystals.Concurrently,both the hardness and wear resistance of the coating decrease.Nevertheless,all Y_(2)O_(3)-modified coatings surpass the undoped Fe45 coating in both hardness and wear resistance.Appropriate Y_(2)O_(3) doping effectively refines the Fe45 alloy coating's microstru cture and induces lattice distortion,thereby enhancing its hardness and wear resistance.
基金supported by the Key R&D Projects in Heilongjiang Province(GA23A901)。
文摘Al-Si-Cu-Mg alloy demonstrates a significant age-hardening effect,with its mechanical properties tunable by optimizing the aging parameters.To enhance this effect,the as-cast Al-8.5Si-2Cu-0.9Mg alloy was subjected to either single-stage aging at temperatures of 150℃,175℃,200℃,and 225℃for 0.5 h to 20 h;or double-stage aging:involving a first-stage aging treatment at 120℃for 1 h,3 h,5 h,or 7 h,followed by a second-stage aging treatment at 175℃ for 0.5 h to 20 h.The microstructure and mechanical properties were evaluated for samples aged at 175℃/7 h,175℃/10 h,120℃/5 h+175℃/5 h,and 120℃/5 h+175℃/8 h.XRD analysis reveals that the as-cast Al-8.5Si-2Cu-0.9Mg alloy consists of theα-Al,Si,θ-Al_(2)Cu,and Q-Al_(5)Cu_(2)Mg_8Si_6phases.The aging kinetics exhibit a double-peak behavior in both single-stage and double-stage aging processes.Under single-stage aging at 175℃/x h and double-stage aging(120℃/5 h+175℃/x h),the precipitates'size at the first peak is smaller than that at the second peak.Compared with single-stage aging(175℃/7 h),double-stage aging(120℃/5 h+175℃/5 h)produces a finer precipitate in the alloy.Theoretical calculations indicate that the number density and nucleation rate of both the Al_(5)Cu_(2)Mg_8Si_6 and Al_(2)Cu phases are higher during the double-stage aging(120℃/5 h+175℃/5 h)than those during the single-stage aging(175℃/7 h).Additionally,tensile tests at both room temperature and 250℃demonstrate that double-stage aging(120℃/5 h+175℃/5 h)significantly improves the mechanical properties of the alloy compared to single-stage aging(175℃/7 h),suggesting that double-stage aging is more effective for enhancing mechanical properties for this alloy.
基金the support from the National Natural Science Foundation of China (Nos. U20A20274, 52061003)the Natural Science Foundation of Yunnan Province, China (No. 202301AT070209)the Science and Technology Major Project of Yunnan Province, China (No. 202102AG050017)。
文摘The age-hardening response,mechanical,and corrosion-resistant properties of AA7085 alloys with and without the addition of 0.3 wt.%scandium(Sc)were compared.Using advanced techniques such as aberration-corrected transmission electron microscopy and first-principles calculations,the underlying micromechanisms of Sc microalloying were revealed.Results show that the increase in strength of the AA7085-Sc alloy is mainly attributed to the decreased Al grain size and increased number density of both Al_(3)Sc@Al_(3)(Sc,Zr)core−shell nanoparticles and Sc-containingη_(p) and GP−η_(p) nanoprecipitates.Strong strain fields and evident electron transfer from Zr to the neighboring matrix Al atoms exist at the Al_(3)Sc@Al_(3)(Sc,Zr)/Al interface.The Sc doping in GP−η_(p) andη_(p) suppresses the GP−η_(p)→η_(p) transformation.Modified corrosion resistance of the AA7085-Sc alloy compared with AA7085 alloy is associated with the fine grain boundary precipitates ofη_(p)hases and narrow precipitation free zone.The reasons of property changes of AA7085 alloy after Sc microalloying are explored based on the multiscale microstructural characterization.
