The control equations of gas concentration field in gob areas with a known velocity field are partial differential equations with variable coefficients,whose traditional mathematical calculation methods are very compl...The control equations of gas concentration field in gob areas with a known velocity field are partial differential equations with variable coefficients,whose traditional mathematical calculation methods are very complex.A numerical simulation method can be used to calculate the gas concentration field,but it also needs considerable amounts of computer resources and the relations of gas concentration at different points of the gob area are undefined.Based on the model of stream tubes,the conservation equations of mass and gas components within the stream tube are used to deduce the equations of a gas concentration field in a gob area with a known velocity field.This method of calculation of a gas concentration field is applied in a gob area with a U-type ventilation working face,which suggests that this new method has the virtue of exact calculations is simple to operate and has a clear physical interpretation.展开更多
The present paper contributes to the modeling of unsteady flow analysis of vertical axis wind turbine (VAWT). Double multiple streamtube (DSMT) model was applied for the performance prediction of straight bladed fixed...The present paper contributes to the modeling of unsteady flow analysis of vertical axis wind turbine (VAWT). Double multiple streamtube (DSMT) model was applied for the performance prediction of straight bladed fixed pitch VAWT using NACA0018 airfoil at low wind speed. A moving mesh technique was used to investigate two-dimensional unsteady flow around the same VAWT model with NACA0018 airfoil modified to be flexible at 150 from the main blade axis of the turbine at the trailing edge located about 70 % of the blade chord length using fluent solving Reynolds average Navier-strokes equation. The results obtained from DMST model and the simulation results were then compared. The result shows that the CFD simulation with airfoil modified has shown better performance at low tip speed ratios for the modeled turbine.展开更多
The performance and annual energy output have to be predicted to maximize the economic benefits from a wind turbine. Mathematically predicting the performance of Darrieus type lift based turbines are challenging due t...The performance and annual energy output have to be predicted to maximize the economic benefits from a wind turbine. Mathematically predicting the performance of Darrieus type lift based turbines are challenging due to the inconsistent angle of attack, blade wake interaction and local induced velocities giving rise to complex flow physics. A reliable and validated mathematical model is therefore essential to optimize the various design parameters prior to manufacture. The objective of the current study is to evaluate widely employed aerodynamic models based on their prediction accuracy, limitations, and computational requirements. Double multiple stream tube models have been discussed in detail and the predictions are experimentally validated through the wind tunnel test of three-bladed H-Darrieus rotor in terms of torque and power coefficient. The possible sources for the deviation between the predicted and measured values have been discussed and concluded with potential solutions.展开更多
In this study, we performed a conceptual modeling on solute transport based on theoretical stream tube model (STM) with various travel time distributions assuming a pure convective flow through each tube in order to i...In this study, we performed a conceptual modeling on solute transport based on theoretical stream tube model (STM) with various travel time distributions assuming a pure convective flow through each tube in order to investigate how the lengths and distributions of solute travel time through STM affect the breakthrough curves at the end mixing surface. The conceptual modeling revealed that 1) the shape of breakthrough curve (BTC) at the mixing surface was determined by not only input travel time distributions but also solute injection mode such as sampling time and pulse lengths;2) the increase of pulse length resulted in the linear increase of the first time moment (mean travel time) and quadratic increase of the second time moment (variance of travel time) leading to more spreading of solute, however, the second time moment was not affected by travel time distributions and 3) for a given input distributions the increase in travel distance resulted in more dispersion with the quadratic increase of travel time variance. This indicates that stream tube model obeying strictly pure convective flow follows the concept of convective-lognormal transport (CLT) model regardless the input travel time distributions.展开更多
New neurons are integrated into the circuitry of the olfactory bulb throughout the lifespan in the mamma- lian brain--including in humans. These new neurons are born in the subventricular zone and subsequently mature ...New neurons are integrated into the circuitry of the olfactory bulb throughout the lifespan in the mamma- lian brain--including in humans. These new neurons are born in the subventricular zone and subsequently mature as they are guided over long distances via the rostral migratory stream through mechanisms we are only just beginning to understand. Regeneration after brain injury is very limited, and although some neuroblasts from the rostral migratory stream will leave the path and migrate toward cortical lesion sites, this neuronal replacement is generally not sustained and therefore does not provide enough new neurons to alleviate functional deficits. Using newly discovered microtissue engineering techniques, we have built the first self-contained, implantable constructs that mimic the architecture and function of the rostral migratory stream. This engineered microtissue emulates the dense cord-like bundles of astrocytic somata and processes that are the hallmark anatomical feature of the glial tube. As such, our living microtissue-en- gineered rostral migratory stream can serve as an in vitro test bed for unlocking the secrets of neuroblast migration and maturation, and may potentially serve as a living transplantable construct derived from a patient＇s own cells that can redirect their own neuroblasts into lesion sites for sustained neuronal replace- ment following brain injury or neurodegenerative disease. In this paper, we summarize the development of fabrication methods for this microtissue-engineered rostral migratory stream and provide proof-of-princi- ple evidence that it promotes and directs migration of immature neurons.展开更多
The technique of modeling operating temperature variations of shell-and-tube heat exchanger 10-E-01 of kerosene-crude oil streams of Port Harcourt refinery crude distillation unit is presented in this research. A...The technique of modeling operating temperature variations of shell-and-tube heat exchanger 10-E-01 of kerosene-crude oil streams of Port Harcourt refinery crude distillation unit is presented in this research. Appropriate first-order model equations were developed applying principles of energy balance. The differential equations developed for the process streams which exchanged heat was evaluated numerically to predict the temperature variations as a function of time. The relevant parameters associated with typical heat exchanger works were calculated using plant data of 10-E-02. The model strives to predict the final kerosene temperature from 488 to 353.6 K. While the crude oil streams temperature rose from 313 to 353.6 K. The developed model enables the operator to predict the final temperature at the kerosene hydro-treating unit and thereby prevent regular emergency shutdowns due to excessive temperature rise.展开更多
基金Financial support for this work,provided by the Doctor Startup Foundation of Xi'an University of Science & Technology
文摘The control equations of gas concentration field in gob areas with a known velocity field are partial differential equations with variable coefficients,whose traditional mathematical calculation methods are very complex.A numerical simulation method can be used to calculate the gas concentration field,but it also needs considerable amounts of computer resources and the relations of gas concentration at different points of the gob area are undefined.Based on the model of stream tubes,the conservation equations of mass and gas components within the stream tube are used to deduce the equations of a gas concentration field in a gob area with a known velocity field.This method of calculation of a gas concentration field is applied in a gob area with a U-type ventilation working face,which suggests that this new method has the virtue of exact calculations is simple to operate and has a clear physical interpretation.
文摘The present paper contributes to the modeling of unsteady flow analysis of vertical axis wind turbine (VAWT). Double multiple streamtube (DSMT) model was applied for the performance prediction of straight bladed fixed pitch VAWT using NACA0018 airfoil at low wind speed. A moving mesh technique was used to investigate two-dimensional unsteady flow around the same VAWT model with NACA0018 airfoil modified to be flexible at 150 from the main blade axis of the turbine at the trailing edge located about 70 % of the blade chord length using fluent solving Reynolds average Navier-strokes equation. The results obtained from DMST model and the simulation results were then compared. The result shows that the CFD simulation with airfoil modified has shown better performance at low tip speed ratios for the modeled turbine.
文摘The performance and annual energy output have to be predicted to maximize the economic benefits from a wind turbine. Mathematically predicting the performance of Darrieus type lift based turbines are challenging due to the inconsistent angle of attack, blade wake interaction and local induced velocities giving rise to complex flow physics. A reliable and validated mathematical model is therefore essential to optimize the various design parameters prior to manufacture. The objective of the current study is to evaluate widely employed aerodynamic models based on their prediction accuracy, limitations, and computational requirements. Double multiple stream tube models have been discussed in detail and the predictions are experimentally validated through the wind tunnel test of three-bladed H-Darrieus rotor in terms of torque and power coefficient. The possible sources for the deviation between the predicted and measured values have been discussed and concluded with potential solutions.
文摘In this study, we performed a conceptual modeling on solute transport based on theoretical stream tube model (STM) with various travel time distributions assuming a pure convective flow through each tube in order to investigate how the lengths and distributions of solute travel time through STM affect the breakthrough curves at the end mixing surface. The conceptual modeling revealed that 1) the shape of breakthrough curve (BTC) at the mixing surface was determined by not only input travel time distributions but also solute injection mode such as sampling time and pulse lengths;2) the increase of pulse length resulted in the linear increase of the first time moment (mean travel time) and quadratic increase of the second time moment (variance of travel time) leading to more spreading of solute, however, the second time moment was not affected by travel time distributions and 3) for a given input distributions the increase in travel distance resulted in more dispersion with the quadratic increase of travel time variance. This indicates that stream tube model obeying strictly pure convective flow follows the concept of convective-lognormal transport (CLT) model regardless the input travel time distributions.
基金supported by the National Institutes of Health[U01-NS094340(Cullen),F31-NS090746(Katiyar)&F32-NS103253(O’Donnell)]University of Pennsylvania[Center for Undergraduate Research&Fellowships(Panzer)]+2 种基金Michael J.Fox Foundation[Therapeutic Pipeline Program#9998(Cullen)]Department of Veterans Affairs[RR&D Merit Review I01-RX001097(Cullen)&BLR&D Merit Review I01-BX003748(Cullen)]the U.S.Army Medical Research and Materiel Command[W81XWH-16-1-0796(Cullen)]
文摘New neurons are integrated into the circuitry of the olfactory bulb throughout the lifespan in the mamma- lian brain--including in humans. These new neurons are born in the subventricular zone and subsequently mature as they are guided over long distances via the rostral migratory stream through mechanisms we are only just beginning to understand. Regeneration after brain injury is very limited, and although some neuroblasts from the rostral migratory stream will leave the path and migrate toward cortical lesion sites, this neuronal replacement is generally not sustained and therefore does not provide enough new neurons to alleviate functional deficits. Using newly discovered microtissue engineering techniques, we have built the first self-contained, implantable constructs that mimic the architecture and function of the rostral migratory stream. This engineered microtissue emulates the dense cord-like bundles of astrocytic somata and processes that are the hallmark anatomical feature of the glial tube. As such, our living microtissue-en- gineered rostral migratory stream can serve as an in vitro test bed for unlocking the secrets of neuroblast migration and maturation, and may potentially serve as a living transplantable construct derived from a patient＇s own cells that can redirect their own neuroblasts into lesion sites for sustained neuronal replace- ment following brain injury or neurodegenerative disease. In this paper, we summarize the development of fabrication methods for this microtissue-engineered rostral migratory stream and provide proof-of-princi- ple evidence that it promotes and directs migration of immature neurons.
文摘The technique of modeling operating temperature variations of shell-and-tube heat exchanger 10-E-01 of kerosene-crude oil streams of Port Harcourt refinery crude distillation unit is presented in this research. Appropriate first-order model equations were developed applying principles of energy balance. The differential equations developed for the process streams which exchanged heat was evaluated numerically to predict the temperature variations as a function of time. The relevant parameters associated with typical heat exchanger works were calculated using plant data of 10-E-02. The model strives to predict the final kerosene temperature from 488 to 353.6 K. While the crude oil streams temperature rose from 313 to 353.6 K. The developed model enables the operator to predict the final temperature at the kerosene hydro-treating unit and thereby prevent regular emergency shutdowns due to excessive temperature rise.
