Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigati...Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigating M_(2)N_(2)(M=Nb,Ta)with DLHC structure using first-principles calculations.Our results show that M_(2)N_(2)are stable and metallic,exhibiting superconducting behavior.Specifically,Nb_(2)N_(2)and Ta_(2)N_(2)display superconducting transition temperatures of 6.8 K and 8.8 K,respectively.Their electron-phonon coupling is predominantly driven by the coupling between metal d-orbitals and low-frequency metal-dominated vibration modes.Interestingly,two compounds also exhibit non-trivial band topology.Thus,M_(2)N_(2)are promising platforms for studying the interplay between topology and superconductivity and fill the gap in superconductivity research for DLHC materials.展开更多
A squall line on 14 June 2009 in the provinces of Jiangsu and Anhui was well simulated using the Advanced Regional Prediction System （ARPS） model. Based on high resolution spatial and temporal data, a detailed analy...A squall line on 14 June 2009 in the provinces of Jiangsu and Anhui was well simulated using the Advanced Regional Prediction System （ARPS） model. Based on high resolution spatial and temporal data, a detailed analysis of the structural features and propagation mechanisms of the squall line was conducted. The dynamic and thermodynamic structural charac- teristics and their causes were analyzed in detail. Unbalanced flows were found to play a key role in initiating gravity waves during the squall line＇s development. The spread and development of the gravity waves were sustained by convection in the wave-CISK process. The squall line＇s propagation and development mainly relied on the combined effect of gravity waves at the midlevel and cold outflow along the gust front. New cells were continuously forced by the cold pool outflow and were enhanced and lifted by the intense upward motion. At a particular phase, the new cells merged with the updraft of the gravity waves, leading to an intense updraft that strengthened the squall line.展开更多
Subsea tunnel lining structures should be designed to sustain the loads transmitted from surrounding ground and groundwater during excavation. Extremely high pore-water pressure reduces the effective strength of the c...Subsea tunnel lining structures should be designed to sustain the loads transmitted from surrounding ground and groundwater during excavation. Extremely high pore-water pressure reduces the effective strength of the country rock that surrounds a tunnel, thereby lowering the arching effect and stratum stability of the structure. In this paper, the mechanical behavior and shape optimization of the lining structure for the Xiang＇an tunnel excavated in weathered slots are examined. Eight cross sections with different geometric parameters are adopted to study the mechanical behavior and shape optimization of the lining structure. The hyperstatic reaction method is used through finite element analysis software ANSYS. The mechanical behavior of the lining structure is evidently affected by the geometric parameters of crosssectional shape. The minimum safety factor of the lining structure elements is set to be the objective function. The efficient tunnel shape to maximize the minimum safety factor is identified. The minimum safety factor increases significantly after optimization. The optimized cross section significantly improves the mechanical characteristics of the lining structure and effectively reduces its deformation. Force analyses of optimization process and program are conducted parametrically so that the method can be applied to the optimization design of other similar structures. The results obtained from this study enhance our understanding of the mechanical behavior of the lining structure for subsea tunnels. These results are also beneficial to the optimal design of lining structures in general.展开更多
[Objective] The aim of the study was to make research on genomic struc- ture variation and variety analysis of Dongxiang wild rice. [Method] Introgression groups of BC1F6 were based on donor of Oryza rufipogon Griff. ...[Objective] The aim of the study was to make research on genomic struc- ture variation and variety analysis of Dongxiang wild rice. [Method] Introgression groups of BC1F6 were based on donor of Oryza rufipogon Griff. and receptor of O. sativa sp. indica Kate. Strains of 239 in the group were analyzed on Polymor- phism with the help of 25 couples of SSR primers distributed in 12 pairs of chromo- somes. [Result] Gene fragments of O. rufipogon Griff. were found penetrated in the 25 microsatellite sites and most of the groups kept the parents of Xieqinzao B or DNA sequence of O. rufipogon Griff. The average rate of recurrent homozygous bands was 78.13% in the ILs, but the highest was 94.98% （amplified by primer RM131） and the lowest was 60.25% （RM171）. The average rate of donor homozy- gous bands was 13.37%, but the highest was 32.64% （RM171） and the lowest was 2.93% （RM1095）. There were numerous heterozygous sites in the population and the average heterozygosis rate was 5.62%, while the highest was 10.04%（RM401）. Moreover, we found some parental fragments were lost and some novel fragments were not detected in either parent in BC1F6 population. The average rate of lost bands was 2.88%, while the highest was 13.39% （RM311） and the lowest was 0 （RM401）. The average rate of new bands was 1%. The average of Nei＇s gene di- versity （He） and Shannon＇s Information index （I） were 0.276 and 0.457 respectively in high generation of introgression lines. [Conclusion] The study demonstrated that distant hybridization led to extensive genetic and epigenetic variations in high gener- ation of introgression lines, which expanded the base of genetic variation and laid an important foundation for rice improvement and germplasm innovation.展开更多
Adapter ring is a commonly used component in non-cooperative satellites,which has high strength and is suitable to be recognized and grasped by the space manipulator.During proximity operations,this circle feature may...Adapter ring is a commonly used component in non-cooperative satellites,which has high strength and is suitable to be recognized and grasped by the space manipulator.During proximity operations,this circle feature may be occluded by the robot arm or limited field of view.Moreover,the captured images may be underexposed when there is not enough illumination.To address these problems,this paper presents a structured light vision system with three line lasers and a monocular camera.The lasers project lines onto the surface of the satellite,and six break points are formed along both sides of the adapter ring.A closed-form solution for real-time pose estimation is given using these break points.Then,a virtual structured light platform is constructed to simulate synthetic images of the target satellite.Compared with the predefined camera parameters and relative positions,the proposed method is demonstrated to be more effective,especially at a close distance.Besides,a physical space verification system is set up to prove the effectiveness and robustness of our method under different light conditions.Experimental results indicate that it is a practical and effective method for the pose measurement of on-orbit tasks.展开更多
Shanghai Changjiang Tunnel, 15 m in diameter, is one of the world＇s largest shield-driven tunnels in diameter. Tongji University has recently carried out a test on the full-scale three-ring lining structure of Changj...Shanghai Changjiang Tunnel, 15 m in diameter, is one of the world＇s largest shield-driven tunnels in diameter. Tongji University has recently carried out a test on the full-scale three-ring lining structure of Changjiang Tunnel. This paper introduces the testing processes, including loading apparatuses, test contents, test cases, etc., and makes comparison with other shield lining structure tests conducted before, and finally gives some evaluations on the design of the tunnel.展开更多
Based on the first unde rwater railway shield tunnel, the Shiziyang shield tunnel of Guangzhou Zhu- jiang River, the prototype test was carried out against its segmental lining structure by using ＂multi-function shie...Based on the first unde rwater railway shield tunnel, the Shiziyang shield tunnel of Guangzhou Zhu- jiang River, the prototype test was carried out against its segmental lining structure by using ＂multi-function shield tunnel structure test system＂. And the mechanical characteristics of segmental lining structure using straight assembling and staggered assembling were studied deeply. The results showed that, the mechanical characteristics of segmental lining structure varied with the water pressures; especially after cracking, the high water pressure played a significant role in slowing down the growing inner force and deformation. It also testi- fied that the failure characteristics varied with straight assembling structure and staggered assembling structure. Shear thilurc often occurred near longitudinal seam when using straight assembling.展开更多
For the rapid calibration of multi-line structured light system,a method based on Plücker line was proposed.Most of the conventional line-structured light calibration methods extract the feature points and transf...For the rapid calibration of multi-line structured light system,a method based on Plücker line was proposed.Most of the conventional line-structured light calibration methods extract the feature points and transform the coordinates of points to obtain the plane equation.However,a large number of points lead to complicated operation which is not suitable for the application scenarios of multi-line structured light.To solve this issue,a new calibration method was proposed that applied the form of Plücker matrix throughout the whole calibration process,instead of using the point characteristics directly.The advantage of this method is that the light plane equation can be obtained quickly and accurately in the camera coordinate frame.Correspondingly a planar target particularly for calibrating multi-line structured light was also designed.The regular lines were transformed into Plücker lines by extending the two-dimensional image plane and defining a new image space.To transform the coordinate frame of Plücker lines,the perspective projection mathematical model was re-expressed based on the Plücker matrix.According to the properties of the line and plane in the Plücker space,a linear matrix equation was efficiently constructed by combining the Plücker matrices of several coplanar lines so that the line-structured light plane equation could be furtherly solved.The experiments performed validate the proposed method and demonstrate the significant improvement in the calibration accuracy,when the test distance is 1.8 m,the root mean square(RMS)error of the three-dimensional point is within 0.08 mm.展开更多
3D printing techniques offer an effective method in fabricating complex radially multi-material structures.However,it is challenging for complex and delicate radially multi-material model geometries without supporting...3D printing techniques offer an effective method in fabricating complex radially multi-material structures.However,it is challenging for complex and delicate radially multi-material model geometries without supporting structures,such as tissue vessels and tubular graft,among others.In this work,we tackle these challenges by developing a polar digital light processing technique which uses a rod as the printing platform.The 3D model fabrication is accomplished through line projection.The rotation and translation of the rod are synchronized to project and illuminate the photosensitive material volume.By controlling the distance between the rod and the printing window,we achieved the printing of tubular structures with a minimum wall thickness as thin as 50 micrometers.By controlling the width of fine slits at the printing window,we achieved the printing of structures with a minimum feature size of 10 micrometers.Our process accomplished the fabrication of thin-walled tubular graft structure with a thickness of only 100 micrometers and lengths of several centimeters within a timeframe of just 100 s.Additionally,it enables the printing of axial multi-material structures,thereby achieving adjustable mechanical strength.This method is conducive to rapid customization of tubular grafts and the manufacturing of tubular components in fields such as dentistry,aerospace,and more.展开更多
Practical techniques for smooth geodesic patterning of membrane structures were investigated.For the geodesic search,adjustment of the subplane of the extracted elements series was proposed,and various spline approxim...Practical techniques for smooth geodesic patterning of membrane structures were investigated.For the geodesic search,adjustment of the subplane of the extracted elements series was proposed,and various spline approximation methods were used to flatten the strip for the generation of a smooth pattern.This search approach is very simple,and the geodesic line could be easily attained by the proposed method without the need for a difficult computation method.Smooth cutting patterning can also be generated by spline approximation without the noise in discrete nodal information.Additionally,the geodesic cutting pattern saved about 21%of the required area for the catenary model due to the reduction of the curvature of the planar pattern seam line.展开更多
Based on the three-pattern decomposition of global atmospheric circulation(TPDGAC), this study investigates the double-layer structure of the Hadley circulation(HC) and its interdecadal evolution characteristics by us...Based on the three-pattern decomposition of global atmospheric circulation(TPDGAC), this study investigates the double-layer structure of the Hadley circulation(HC) and its interdecadal evolution characteristics by using monthly horizontal wind field from NCEP/NCAR reanalysis data from 1948—2011. The following major conclusions are drawn: First, the double-layer structure of the HC is an objective fact, and it constantly exists in April,May, June, October and November in the Southern Hemisphere. Second, the double-layer structure is more obvious in the Southern than in the Northern Hemisphere. Since the double-layer structure is sloped in the vertical direction, it should be taken into consideration when analyzing the variations of the strength and location of the center of the HC.Third, the strength of the double-layer structure of the HC in the Southern Hemisphere consistently exhibits decadal variations with a strong, weak and strong pattern in all five months(April, May, June, October, and November), with cycles of 20-30 a and 40-60 a. Fourth, the center of the HC(mean position of the double-layer structure) in the Southern Hemisphere consistently and remarkably shifts southward in all the five months. The net poleward shifts over the 64 years are 5.18°, 2.11°, 2.50°, 1.79° and 5.76° for the five respective months, with a mean shift of 3.47°.展开更多
A dual structure of composite right/left handed (CRLH) transmission line (TL) is analyzed in which an inductance LR is in parallel with a capacitance CL and a shunt capacitance CR is in series with an inductance LL. B...A dual structure of composite right/left handed (CRLH) transmission line (TL) is analyzed in which an inductance LR is in parallel with a capacitance CL and a shunt capacitance CR is in series with an inductance LL. Both the distributed and lumped cases are considered. The dispersion diagram and transmission properties of the dual CRLH TL are given and compared with those of a standard CRLH TL. Contrary to the frequency response of a standard CRLH TL, a dual CRLH TL has a left-handed (negative phase shift) band at higher frequencies and a right-handed (positive phase shift) band at lower frequencies. A novel dual-band balun is presented as an application.展开更多
I will review some key aspects of the physical conditions of the line emitting regions in AGN. The innermost BLR extends at radii of light days to light weeks from the central ionizing source. There are strong indicat...I will review some key aspects of the physical conditions of the line emitting regions in AGN. The innermost BLR extends at radii of light days to light weeks from the central ionizing source. There are strong indications that the BLR clouds are connected to the outer region of an accretion disk. Trends of radial acceleration of the line emitting clouds have been found in the extended narrow line region. Ⅰ will concentrate on observations taken in the optical wavelength range. Finally, Ⅰ will discuss different methods to determine the mass of the central supermassive black hole from the emission lines.展开更多
The in-line （IL） vortex-induced vibration （VIV） that occurs frequently in ocean engineering may cause severe fatigue damage in slender marine structures. To the best knowledge of the authors, in existing literatur...The in-line （IL） vortex-induced vibration （VIV） that occurs frequently in ocean engineering may cause severe fatigue damage in slender marine structures. To the best knowledge of the authors, in existing literatures, there is no efficient analytical model for predicting pure IL VIV. In this paper, a wake oscillator model capable of analyzing the IL VIV of slender marine structures has been developed. Two different kinds of van der Pol equations are used to describe the near wake dynamics related to the fluctuating nature of symmetric vortex shedding in the first excitation region and alternate vortex shedding in the second one. Some comparisons are carried out between the present model results and experimental data. It is found that many phenomena observed in experiments could be reproduced by the present wake oscillator model.展开更多
Vanadium oxide(VO_(x))has garnered significant attention in the realm of resistive random-access memory(RRAM)owing to its outstanding resistive switching characteristics.However,the ambiguous mechanisms of resistive s...Vanadium oxide(VO_(x))has garnered significant attention in the realm of resistive random-access memory(RRAM)owing to its outstanding resistive switching characteristics.However,the ambiguous mechanisms of resistive switching and inferior stability hinder its practical applications.Herein,an RRAM named VO_(x)/TiO_(2)/n^(++)Si device is prepared.It displays bipolar resistive switching behavior and shows superior cycle endurance(>200),a significantly high on/off ratio(>10^(2))and long-term stability.The tremendous improvement in the stability of the VO_(x)/TiO_(2)/n^(++)Si device compared with the Cu/VOx/n^(++)Si device is due to the p-i-n structure of VO_(x)/TiO_(2)/n^(++)Si.The switching mechanism of the VO_(x)/TiO_(2)/n^(++)Si device is attributed to the growth and annihilation of Cu conductive filaments.展开更多
Based on the characteristics of line structured light sensor, a speedy method for the calibration was established. With the coplanar reference target, the spacial pose between camera and optical plane can be calibrate...Based on the characteristics of line structured light sensor, a speedy method for the calibration was established. With the coplanar reference target, the spacial pose between camera and optical plane can be calibrated by using of the camera’s projective center and the light’s information in the camera’s image surface. Without striction to the movement of the coplanar reference target and assistant adjustment equipment, this calibration method can be implemented. This method has been used and decreased the cost of calibration equipment, simplified the calibration procedure, improved calibration efficiency. Using experiment, the sensor can attain relative accuracy about 0.5%, which indicates the rationality and effectivity of this method.展开更多
This paper presents the analysis of open microstrip structures by using diakoptic method of lines (ML) combined with periodic boundary conditions (PBC). The parameters of microstrip patch are obtained from patch curre...This paper presents the analysis of open microstrip structures by using diakoptic method of lines (ML) combined with periodic boundary conditions (PBC). The parameters of microstrip patch are obtained from patch current excited by plane wave. Impedance matrix elements are computed by using fast Fourier transform(FFT), and reduced equation is solved by using diakoptic technique. Consequently, the computing time is reduced significantly. The convergence property of simulating open structure by using PBC and the comparison of the computer time between using PBC and usual absorbing boundary condition (ABC) show the validity of the method proposed in this paper. Finally, the resonant frequency of a microstrip patch is computed. The numerical results obtained are in good agreement with those published.展开更多
The innovative and unconventional diagonal dividing line fitting clothing is one kind of extraordinary structures. In order to make up the fitting garment,the pattern shape is different from the common structure on ga...The innovative and unconventional diagonal dividing line fitting clothing is one kind of extraordinary structures. In order to make up the fitting garment,the pattern shape is different from the common structure on garment. Besides that,the way of grading series pattern will be different. The fitting garment with 45° fourpiece extraordinary diagonal structure line was taken for example.The series pattern is made directly and the grading rules are found by analyzing the geometric relationship of each grading point in the corresponding pattern. The research technique for extraordinary structures garment is offered. It gives the pattern-maker in garment industry exact grading data on fitting garment with 45° four-piece diagonal structure line. It has practical and scientific guiding sense.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12074213 and 11574108)the National Key R&D Program of China(Grant No.2022YFA1403103)+2 种基金the Major Basic Program of Natural Science Foundation of Shandong Province(Grant No.ZR2021ZD01)the Natural Science Foundation of Shandong Province(Grant No.ZR2023MA082)the Project of Introduction and Cultivation for Young Innovative Talents in Colleges and Universities of Shandong Province。
文摘Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigating M_(2)N_(2)(M=Nb,Ta)with DLHC structure using first-principles calculations.Our results show that M_(2)N_(2)are stable and metallic,exhibiting superconducting behavior.Specifically,Nb_(2)N_(2)and Ta_(2)N_(2)display superconducting transition temperatures of 6.8 K and 8.8 K,respectively.Their electron-phonon coupling is predominantly driven by the coupling between metal d-orbitals and low-frequency metal-dominated vibration modes.Interestingly,two compounds also exhibit non-trivial band topology.Thus,M_(2)N_(2)are promising platforms for studying the interplay between topology and superconductivity and fill the gap in superconductivity research for DLHC materials.
基金supported by the National Basic Research Program of China (Grant No. 2013CB 430105)the Key Program of the Chinese Academy of Sciences (Grant No. KZZD-EW-05)+1 种基金the project of CAMS (Chinese Academy of Meteorological Sciences) (Grant No. 2011LASWB15)the National Natural Sciences Foundation of China (Grant No. 41175060)
文摘A squall line on 14 June 2009 in the provinces of Jiangsu and Anhui was well simulated using the Advanced Regional Prediction System （ARPS） model. Based on high resolution spatial and temporal data, a detailed analysis of the structural features and propagation mechanisms of the squall line was conducted. The dynamic and thermodynamic structural charac- teristics and their causes were analyzed in detail. Unbalanced flows were found to play a key role in initiating gravity waves during the squall line＇s development. The spread and development of the gravity waves were sustained by convection in the wave-CISK process. The squall line＇s propagation and development mainly relied on the combined effect of gravity waves at the midlevel and cold outflow along the gust front. New cells were continuously forced by the cold pool outflow and were enhanced and lifted by the intense upward motion. At a particular phase, the new cells merged with the updraft of the gravity waves, leading to an intense updraft that strengthened the squall line.
基金financially supported by the National Natural Science Foundation of China(Grant No.51308012)the Key Laboratory of Transportation Tunnel Engineering+1 种基金Ministry of EducationSouthwest Jiaotong University(Grant No.TTE2014-06)
文摘Subsea tunnel lining structures should be designed to sustain the loads transmitted from surrounding ground and groundwater during excavation. Extremely high pore-water pressure reduces the effective strength of the country rock that surrounds a tunnel, thereby lowering the arching effect and stratum stability of the structure. In this paper, the mechanical behavior and shape optimization of the lining structure for the Xiang＇an tunnel excavated in weathered slots are examined. Eight cross sections with different geometric parameters are adopted to study the mechanical behavior and shape optimization of the lining structure. The hyperstatic reaction method is used through finite element analysis software ANSYS. The mechanical behavior of the lining structure is evidently affected by the geometric parameters of crosssectional shape. The minimum safety factor of the lining structure elements is set to be the objective function. The efficient tunnel shape to maximize the minimum safety factor is identified. The minimum safety factor increases significantly after optimization. The optimized cross section significantly improves the mechanical characteristics of the lining structure and effectively reduces its deformation. Force analyses of optimization process and program are conducted parametrically so that the method can be applied to the optimization design of other similar structures. The results obtained from this study enhance our understanding of the mechanical behavior of the lining structure for subsea tunnels. These results are also beneficial to the optimal design of lining structures in general.
基金partially supported by National Natural Science Foundation of China(30860120,30900781)Science and Technology Projects of Jiangxi Education Department(GJJ09464)Natural Science Foundation of Jiangxi(2008GQN0059)~~
文摘[Objective] The aim of the study was to make research on genomic struc- ture variation and variety analysis of Dongxiang wild rice. [Method] Introgression groups of BC1F6 were based on donor of Oryza rufipogon Griff. and receptor of O. sativa sp. indica Kate. Strains of 239 in the group were analyzed on Polymor- phism with the help of 25 couples of SSR primers distributed in 12 pairs of chromo- somes. [Result] Gene fragments of O. rufipogon Griff. were found penetrated in the 25 microsatellite sites and most of the groups kept the parents of Xieqinzao B or DNA sequence of O. rufipogon Griff. The average rate of recurrent homozygous bands was 78.13% in the ILs, but the highest was 94.98% （amplified by primer RM131） and the lowest was 60.25% （RM171）. The average rate of donor homozy- gous bands was 13.37%, but the highest was 32.64% （RM171） and the lowest was 2.93% （RM1095）. There were numerous heterozygous sites in the population and the average heterozygosis rate was 5.62%, while the highest was 10.04%（RM401）. Moreover, we found some parental fragments were lost and some novel fragments were not detected in either parent in BC1F6 population. The average rate of lost bands was 2.88%, while the highest was 13.39% （RM311） and the lowest was 0 （RM401）. The average rate of new bands was 1%. The average of Nei＇s gene di- versity （He） and Shannon＇s Information index （I） were 0.276 and 0.457 respectively in high generation of introgression lines. [Conclusion] The study demonstrated that distant hybridization led to extensive genetic and epigenetic variations in high gener- ation of introgression lines, which expanded the base of genetic variation and laid an important foundation for rice improvement and germplasm innovation.
基金financial support provided by the Foundation for Innovative Research Groups of the National Natural Science Foundation of China (Nos. 51521003 and 61690210)
文摘Adapter ring is a commonly used component in non-cooperative satellites,which has high strength and is suitable to be recognized and grasped by the space manipulator.During proximity operations,this circle feature may be occluded by the robot arm or limited field of view.Moreover,the captured images may be underexposed when there is not enough illumination.To address these problems,this paper presents a structured light vision system with three line lasers and a monocular camera.The lasers project lines onto the surface of the satellite,and six break points are formed along both sides of the adapter ring.A closed-form solution for real-time pose estimation is given using these break points.Then,a virtual structured light platform is constructed to simulate synthetic images of the target satellite.Compared with the predefined camera parameters and relative positions,the proposed method is demonstrated to be more effective,especially at a close distance.Besides,a physical space verification system is set up to prove the effectiveness and robustness of our method under different light conditions.Experimental results indicate that it is a practical and effective method for the pose measurement of on-orbit tasks.
文摘Shanghai Changjiang Tunnel, 15 m in diameter, is one of the world＇s largest shield-driven tunnels in diameter. Tongji University has recently carried out a test on the full-scale three-ring lining structure of Changjiang Tunnel. This paper introduces the testing processes, including loading apparatuses, test contents, test cases, etc., and makes comparison with other shield lining structure tests conducted before, and finally gives some evaluations on the design of the tunnel.
基金Joint Funds of National Natural Science Foundation of China(No.U1134208)National Key Basic Research Program of China(No.2010CB732105)National Natural Science Foundation of China(No.50925830,No.51208432)
文摘Based on the first unde rwater railway shield tunnel, the Shiziyang shield tunnel of Guangzhou Zhu- jiang River, the prototype test was carried out against its segmental lining structure by using ＂multi-function shield tunnel structure test system＂. And the mechanical characteristics of segmental lining structure using straight assembling and staggered assembling were studied deeply. The results showed that, the mechanical characteristics of segmental lining structure varied with the water pressures; especially after cracking, the high water pressure played a significant role in slowing down the growing inner force and deformation. It also testi- fied that the failure characteristics varied with straight assembling structure and staggered assembling structure. Shear thilurc often occurred near longitudinal seam when using straight assembling.
基金National Natural Science Foundation of China(No.51575388)。
文摘For the rapid calibration of multi-line structured light system,a method based on Plücker line was proposed.Most of the conventional line-structured light calibration methods extract the feature points and transform the coordinates of points to obtain the plane equation.However,a large number of points lead to complicated operation which is not suitable for the application scenarios of multi-line structured light.To solve this issue,a new calibration method was proposed that applied the form of Plücker matrix throughout the whole calibration process,instead of using the point characteristics directly.The advantage of this method is that the light plane equation can be obtained quickly and accurately in the camera coordinate frame.Correspondingly a planar target particularly for calibrating multi-line structured light was also designed.The regular lines were transformed into Plücker lines by extending the two-dimensional image plane and defining a new image space.To transform the coordinate frame of Plücker lines,the perspective projection mathematical model was re-expressed based on the Plücker matrix.According to the properties of the line and plane in the Plücker space,a linear matrix equation was efficiently constructed by combining the Plücker matrices of several coplanar lines so that the line-structured light plane equation could be furtherly solved.The experiments performed validate the proposed method and demonstrate the significant improvement in the calibration accuracy,when the test distance is 1.8 m,the root mean square(RMS)error of the three-dimensional point is within 0.08 mm.
基金supported financially by the Fundamental Research Funds for the Central Universities (YWF-22-K-101,YWF-23-L-805 and YWF-23-YG-QB-006)the support from the National Natural Science Foundation of China (12372106)Fundamental Research Funds for the Central Universities
文摘3D printing techniques offer an effective method in fabricating complex radially multi-material structures.However,it is challenging for complex and delicate radially multi-material model geometries without supporting structures,such as tissue vessels and tubular graft,among others.In this work,we tackle these challenges by developing a polar digital light processing technique which uses a rod as the printing platform.The 3D model fabrication is accomplished through line projection.The rotation and translation of the rod are synchronized to project and illuminate the photosensitive material volume.By controlling the distance between the rod and the printing window,we achieved the printing of tubular structures with a minimum wall thickness as thin as 50 micrometers.By controlling the width of fine slits at the printing window,we achieved the printing of structures with a minimum feature size of 10 micrometers.Our process accomplished the fabrication of thin-walled tubular graft structure with a thickness of only 100 micrometers and lengths of several centimeters within a timeframe of just 100 s.Additionally,it enables the printing of axial multi-material structures,thereby achieving adjustable mechanical strength.This method is conducive to rapid customization of tubular grafts and the manufacturing of tubular components in fields such as dentistry,aerospace,and more.
基金Project(12 High-tech Urban C22)supported by High-tech Urban Development Program,Ministry of Land,Transport and Moritime Affairs of Korea
文摘Practical techniques for smooth geodesic patterning of membrane structures were investigated.For the geodesic search,adjustment of the subplane of the extracted elements series was proposed,and various spline approximation methods were used to flatten the strip for the generation of a smooth pattern.This search approach is very simple,and the geodesic line could be easily attained by the proposed method without the need for a difficult computation method.Smooth cutting patterning can also be generated by spline approximation without the noise in discrete nodal information.Additionally,the geodesic cutting pattern saved about 21%of the required area for the catenary model due to the reduction of the curvature of the planar pattern seam line.
基金National Natural Science Foundation of China(41475068,40805034)Special Scientific Research Project for Public Interest(GYHY201206009)Fundamental Research Funds for the Central Universities of China(lzujbky-2014-203)
文摘Based on the three-pattern decomposition of global atmospheric circulation(TPDGAC), this study investigates the double-layer structure of the Hadley circulation(HC) and its interdecadal evolution characteristics by using monthly horizontal wind field from NCEP/NCAR reanalysis data from 1948—2011. The following major conclusions are drawn: First, the double-layer structure of the HC is an objective fact, and it constantly exists in April,May, June, October and November in the Southern Hemisphere. Second, the double-layer structure is more obvious in the Southern than in the Northern Hemisphere. Since the double-layer structure is sloped in the vertical direction, it should be taken into consideration when analyzing the variations of the strength and location of the center of the HC.Third, the strength of the double-layer structure of the HC in the Southern Hemisphere consistently exhibits decadal variations with a strong, weak and strong pattern in all five months(April, May, June, October, and November), with cycles of 20-30 a and 40-60 a. Fourth, the center of the HC(mean position of the double-layer structure) in the Southern Hemisphere consistently and remarkably shifts southward in all the five months. The net poleward shifts over the 64 years are 5.18°, 2.11°, 2.50°, 1.79° and 5.76° for the five respective months, with a mean shift of 3.47°.
基金Project supported by the National Basic Research Program (973) of China (No. 2004CB719802), and the Science and Technology De-partment of Zhejiang Province (No. 2005C31004), China
文摘A dual structure of composite right/left handed (CRLH) transmission line (TL) is analyzed in which an inductance LR is in parallel with a capacitance CL and a shunt capacitance CR is in series with an inductance LL. Both the distributed and lumped cases are considered. The dispersion diagram and transmission properties of the dual CRLH TL are given and compared with those of a standard CRLH TL. Contrary to the frequency response of a standard CRLH TL, a dual CRLH TL has a left-handed (negative phase shift) band at higher frequencies and a right-handed (positive phase shift) band at lower frequencies. A novel dual-band balun is presented as an application.
文摘I will review some key aspects of the physical conditions of the line emitting regions in AGN. The innermost BLR extends at radii of light days to light weeks from the central ionizing source. There are strong indications that the BLR clouds are connected to the outer region of an accretion disk. Trends of radial acceleration of the line emitting clouds have been found in the extended narrow line region. Ⅰ will concentrate on observations taken in the optical wavelength range. Finally, Ⅰ will discuss different methods to determine the mass of the central supermassive black hole from the emission lines.
基金supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China (SRFDP)(20100032120047)the Independent Innovation Fund of Tianjin University (2010XJ-0098)+2 种基金State Key Laboratory of Ocean Engineering (Shanghai Jiao Tong University) (1104)the National High Technology Research and Development Program of China(863 Program) ( 2012AA051705)the National Natural Science Foundation of China (51209161)
文摘The in-line （IL） vortex-induced vibration （VIV） that occurs frequently in ocean engineering may cause severe fatigue damage in slender marine structures. To the best knowledge of the authors, in existing literatures, there is no efficient analytical model for predicting pure IL VIV. In this paper, a wake oscillator model capable of analyzing the IL VIV of slender marine structures has been developed. Two different kinds of van der Pol equations are used to describe the near wake dynamics related to the fluctuating nature of symmetric vortex shedding in the first excitation region and alternate vortex shedding in the second one. Some comparisons are carried out between the present model results and experimental data. It is found that many phenomena observed in experiments could be reproduced by the present wake oscillator model.
基金National Natural Science Foundation of China(No.61376017)。
文摘Vanadium oxide(VO_(x))has garnered significant attention in the realm of resistive random-access memory(RRAM)owing to its outstanding resistive switching characteristics.However,the ambiguous mechanisms of resistive switching and inferior stability hinder its practical applications.Herein,an RRAM named VO_(x)/TiO_(2)/n^(++)Si device is prepared.It displays bipolar resistive switching behavior and shows superior cycle endurance(>200),a significantly high on/off ratio(>10^(2))and long-term stability.The tremendous improvement in the stability of the VO_(x)/TiO_(2)/n^(++)Si device compared with the Cu/VOx/n^(++)Si device is due to the p-i-n structure of VO_(x)/TiO_(2)/n^(++)Si.The switching mechanism of the VO_(x)/TiO_(2)/n^(++)Si device is attributed to the growth and annihilation of Cu conductive filaments.
文摘Based on the characteristics of line structured light sensor, a speedy method for the calibration was established. With the coplanar reference target, the spacial pose between camera and optical plane can be calibrated by using of the camera’s projective center and the light’s information in the camera’s image surface. Without striction to the movement of the coplanar reference target and assistant adjustment equipment, this calibration method can be implemented. This method has been used and decreased the cost of calibration equipment, simplified the calibration procedure, improved calibration efficiency. Using experiment, the sensor can attain relative accuracy about 0.5%, which indicates the rationality and effectivity of this method.
基金Supported by the National Natural Science Foundation of China
文摘This paper presents the analysis of open microstrip structures by using diakoptic method of lines (ML) combined with periodic boundary conditions (PBC). The parameters of microstrip patch are obtained from patch current excited by plane wave. Impedance matrix elements are computed by using fast Fourier transform(FFT), and reduced equation is solved by using diakoptic technique. Consequently, the computing time is reduced significantly. The convergence property of simulating open structure by using PBC and the comparison of the computer time between using PBC and usual absorbing boundary condition (ABC) show the validity of the method proposed in this paper. Finally, the resonant frequency of a microstrip patch is computed. The numerical results obtained are in good agreement with those published.
文摘The innovative and unconventional diagonal dividing line fitting clothing is one kind of extraordinary structures. In order to make up the fitting garment,the pattern shape is different from the common structure on garment. Besides that,the way of grading series pattern will be different. The fitting garment with 45° fourpiece extraordinary diagonal structure line was taken for example.The series pattern is made directly and the grading rules are found by analyzing the geometric relationship of each grading point in the corresponding pattern. The research technique for extraordinary structures garment is offered. It gives the pattern-maker in garment industry exact grading data on fitting garment with 45° four-piece diagonal structure line. It has practical and scientific guiding sense.
