高压电缆长期过热可能导致绝缘热击穿,进而影响电网的稳定性。然而,当前研究主要集中在传统预测模型上,忽略了温度数据的复杂性和动态特征。为了解决此问题,提出一种基于多尺度Patch与卷积交互的电缆温度预测模型(MSP-CI)。首先,采用通...高压电缆长期过热可能导致绝缘热击穿,进而影响电网的稳定性。然而,当前研究主要集中在传统预测模型上,忽略了温度数据的复杂性和动态特征。为了解决此问题,提出一种基于多尺度Patch与卷积交互的电缆温度预测模型(MSP-CI)。首先,采用通道重组采样方法降低输入维度,并构建多尺度Patch分支结构,以实现复杂时间序列的解耦;其次,结合序列分解与卷积交互策略,分别提取粗粒度Patch的宏观信息与细粒度Patch的微观信息;最后,构建注意力融合模块,以动态平衡宏观与微观信息的权重,并得到最终的预测结果。在真实高压电缆温度数据集上的实验结果表明,MSP-CI相较于TimeMixer、PatchTST(Patch Time Series Transformer)和MSGNet(Multi-Scale interseries Graph Network)等基线模型,在均方误差(MSE)上下降了7.02%~34.87%,在平均绝对误差(MAE)上下降了5.15%~32.04%。可见,MSP-CI能有效提升电缆温度预测的准确率,为电力调度运行提供依据。展开更多
Microneedles(MNs)have been extensively investigated for transdermal delivery of large-sized drugs,including proteins,nucleic acids,and even extracellular vesicles(EVs).However,for their sufficient skin penetration,con...Microneedles(MNs)have been extensively investigated for transdermal delivery of large-sized drugs,including proteins,nucleic acids,and even extracellular vesicles(EVs).However,for their sufficient skin penetration,conventional MNs employ long needles(≥600μm),leading to pain and skin irritation.Moreover,it is critical to stably apply MNs against complex skin surfaces for uniform nanoscale drug delivery.Herein,a dually amplified transdermal patch(MN@EV/SC)is developed as the stem cell-derived EV delivery platform by hierarchically integrating an octopusinspired suction cup(SC)with short MNs(≤300μm).While leveraging the suction effect to induce nanoscale deformation of the stratum corneum,MN@EV/SC minimizes skin damage and enhances the adhesion of MNs,allowing EV to penetrate deeper into the dermis.When MNs of various lengths are applied to mouse skin,the short MNs can elicit comparable corticosterone release to chemical adhesives,whereas long MNs induce a prompt stress response.MN@EV/SC can achieve a remarkable penetration depth(290μm)for EV,compared to that of MN alone(111μm).Consequently,MN@EV/SC facilitates the revitalization of fibroblasts and enhances collagen synthesis in middle-aged mice.Overall,MN@EV/SC exhibits the potential for skin regeneration by modulating the dermal microenvironment and ensuring patient comfort.展开更多
Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigati...Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigating M_(2)N_(2)(M=Nb,Ta)with DLHC structure using first-principles calculations.Our results show that M_(2)N_(2)are stable and metallic,exhibiting superconducting behavior.Specifically,Nb_(2)N_(2)and Ta_(2)N_(2)display superconducting transition temperatures of 6.8 K and 8.8 K,respectively.Their electron-phonon coupling is predominantly driven by the coupling between metal d-orbitals and low-frequency metal-dominated vibration modes.Interestingly,two compounds also exhibit non-trivial band topology.Thus,M_(2)N_(2)are promising platforms for studying the interplay between topology and superconductivity and fill the gap in superconductivity research for DLHC materials.展开更多
The alpine grassland vegetation on the Qinghai-Tibet Plateau is composed of plant patches in varied sizes.It remains uncertain whether vegetation recovery following grazing exclusion(GE)in degraded grasslands is drive...The alpine grassland vegetation on the Qinghai-Tibet Plateau is composed of plant patches in varied sizes.It remains uncertain whether vegetation recovery following grazing exclusion(GE)in degraded grasslands is driven by increases in patches number(NP),patch size(PS),or both.We based our predictions on two hypotheses:GE intensifies plant competition,and facilitation prevails near patches while competition prevails in interpatch spaces.We predicted that the NP would remain stable or decrease and PS would increase under GE treatment.To evaluate these predictions,we conducted a study in six lightly degraded alpine grasslands under free grazing(FG)conditions in Bangor County,Xizang Autonomous Region,China,with corresponding GE treatments using transects in 2017 and 2018.Results revealed that four sites in 2017 and five sites in 2018 had reduced NP and increased PS,with probabilities of 0.033(2017)and 0.004(2018),respectively,and a joint probability of 0.0001 under the null hypothesis that GE does not affect NP or PS.The NP reduction was solely due to the decrease in small patch sizes.An increase in PS was common across species,and a predominant tendency for NP reduction was observed among species across the sites.The overall changes in NP and PS were primarily driven by the three most abundant species(contributing more than 60%in both years),rather than by shifts in floristic composition.Our findings highlight that vegetation recovery in Bangor alpine steppes following GE relies solely on the expansion of existing patches rather than the recruitment of new ones in interpatch gaps.We recommend prioritizing growth-promoting measures,such as nutrient or water management,over seed addition when assisting with GE for restoring lightly degraded grasslands.展开更多
In this study,we developed a novel bilayered scaffold consisting of a bottom layer composed of the Decellularized Bovine Pericardium(DP)coated with Polyaniline Nanoparticles(PANINPs)and a top layer made of an electros...In this study,we developed a novel bilayered scaffold consisting of a bottom layer composed of the Decellularized Bovine Pericardium(DP)coated with Polyaniline Nanoparticles(PANINPs)and a top layer made of an electrospun Poly(lactic-co-glycolic acid)/Gelatin(PLGA/Gel)membrane incorporated with Vascular Endothelial Growth Fac-tor(VEGF)and hawthorn extract.Functionally,the DP supplies native Extracellular Matrix(ECM)components and mechanical support,while PANINPs provide conductivity.The electrospun PLGA/Gel layer mimics fibrous ECM.It incorporates bioactives,with VEGF promoting pro-angiogenic stimulation and hawthorn extract enhanc-ing anticoagulant activity,as well as increasing surface hydrophilicity.The tissue adhesive ensures the interfacial integrity between the two layers.Decellularization efficiency was confirmed histologically using 4',6-diamidino-2-phenylindole(DAPI)and Hematoxylin-Eosin(H&E)staining.The DP exhibited a DNA content of 115.9±47.8 ng/mg DNA,compared to 982.88±395.42 ng/mg in Native Pericardium(NP).The PANINPs had an average par-ticle size of 104.94±13.7 nm.The conductivity of PANINPs-coated decellularized pericardium was measured to be 9.093±8.6×10-4 S/cm using the four-point probe method.PLGA/Gel membranes containing hawthorn extract(1%,5%,10%,and 15%w/v)and VEGF(0.1μg/mL,0.5μg/mL,and 1μg/mL)were fabricated by electrospinning,result-ing in fiber diameters between 850 and 1200 nm and pore sizes between 14 and 20μm.The anticoagulant efficiency of the membranes containing hawthorn extract reached 430 s in the Activated Partial Thromboplastin Time Assay(aPTT).Mechanical testing revealed a tensile strength of 22.70±6.33 MPa,an elongation of 53.58±10.63%,and Young's modulus of 0.67±0.10 MPa.The scaffold also exhibited over 91%cell viability and excellent cardiomyo-cyte adhesion.The hemolysis ratio was determined to be 0.421±0.191%,which confirms its blood compatibility.Our results indicate that the proposed bilayered scaffold can be a promising candidate for cardiac patch applications.展开更多
In the version of the article originally published in the volume 68,issue 12,2025 of Sci China Mater(pages 4413-4422,https://doi.org/10.1007/s40843-025-3667-7),the Chinese name of the co-first author(肖天孝)was incorr...In the version of the article originally published in the volume 68,issue 12,2025 of Sci China Mater(pages 4413-4422,https://doi.org/10.1007/s40843-025-3667-7),the Chinese name of the co-first author(肖天孝)was incorrect.The corrected Chinese name is:肖天笑.展开更多
In order to establish the relationship between the measured dynamic response and the health status of long-span bridges, a double-layer model updating method for steel-concrete composite beam cable-stayed bridges is p...In order to establish the relationship between the measured dynamic response and the health status of long-span bridges, a double-layer model updating method for steel-concrete composite beam cable-stayed bridges is proposed. Measured frequencies are selected as the first-layer reference data, and the mass of the bridge deck, the grid density, the modulus of concrete and the ballast on the side span are modified by using a manual tuning technique. Measured global positioning system （GPS） data is selected as the second-layer reference data, and the degradation of the integral structure stiffness EI of the whole bridge is taken into account for the second-layer model updating by using the finite element iteration algorithm. The Nanpu Bridge in Shanghai is taken as a case to verify the applicability of the proposed model updating method. After the first-layer model updating, the standard deviation of modal frequencies is smaller than 7%. After the second-layer model updating, the error of the deflection of the mid-span is smaller than 10%. The integral structure stiffness of the whole bridge decreases about 20%. The research results show a good agreement between the calculated response and the measured response.展开更多
In order to increase the fatigue life (FL) of road wheels (RW), a kind of double layer rubber flange (DLRF) is put forward. It consists of two layers of rubber, where metal wires are laid in the inner layer and the ou...In order to increase the fatigue life (FL) of road wheels (RW), a kind of double layer rubber flange (DLRF) is put forward. It consists of two layers of rubber, where metal wires are laid in the inner layer and the outer layer has no inlaid metal wires. Stress, strain and temperature field of DLRF were calculated with ANSYS finite element analysis (FEA) software, FL of DLRF RW was also computed with fracture mechanics fatigue theory. The results of computation indicate that the heat generated in RW's rubber flange (RF) can be reduced by the use of DLRF, and the FL of RW can be increased without affecting the mechanical intensity of RW.展开更多
The aim of the study was to develop actarit double-layered osmotic pump tablets to overcome the weak points of actarit common tablets, such as short half-life and large plasma concentration fluctuations. Single factor...The aim of the study was to develop actarit double-layered osmotic pump tablets to overcome the weak points of actarit common tablets, such as short half-life and large plasma concentration fluctuations. Single factor experiment and orthogonal test were applied to optimize the formulation;the pharmacokinetic study was performed in beagle dogs adopting actarit common tablets as reference tablets. The optimal formulation was as follows: drug layer: 150 mg actarit, 240 mg PEO-N80, 50 mg NaCl;push layer: 140 mg PEO-WSR303, 20 mg NaCl;coating solution: 30 g cellulose acetate and 6 g PEG 4000 in 1000 ml 94% acetone solution, 60 mg coating weight gain. The pharmacokinetic study showed that T max was prolonged by the contrast of commercial common tablets with constant drug release rate, but the bioavailability was equivalent. And a good in vivo –in vitro correlation of the actarit osmotic pump tablets was also established. The designed actarit osmotic pump tablets can be applied for rheumatoid arthritis, proposing a promising replacement for the marked common products.展开更多
AIM To investigate the efficacy of double-layered covered stent in the treatment of malignant oesophageal obstructions.METHODS A systematic review and meta-analysis was performed following the PRISMA process. Pub Med(...AIM To investigate the efficacy of double-layered covered stent in the treatment of malignant oesophageal obstructions.METHODS A systematic review and meta-analysis was performed following the PRISMA process. Pub Med(Medline),EMBASE(Excerpta Medical Database),AMED(Allied and Complementary medicine Database),Scopus and online content,were searched for studies reporting on the Ni Ti-S polyurethane-covered double oesophageal stent for the treatment of malignant dysphagia. Weighted pooled outcomes were synthesized with a random effects model to account for clinical heterogeneity. All studies reporting the outcome of palliative management of dysphagia due to histologically confirmed malignant oesophageal obstruction using double-layered covered nitinol stent were included. The level of statistical significance was set at α = 0.05.RESULTS Six clinical studies comprising 250 patients in total were identified. Pooled technical success of stent insertion was 97.2%(95%CI: 94.8%-98.9%; I2 = 5.8%). Pooled complication rate was 27.6%(95%CI: 20.7%-35.2%; I2 = 41.9%). Weighted improvement of dysphagia on a scale of 0-5 scoring system was-2.00 [95%CI:-2.29%-(-1.72%); I2 = 87%]. Distal stent migration was documented in 10 out of the 250 cases examined.Pooled stent migration rate was 4.7%(95%CI: 2.5%-7.7%; I2 = 0%). Finally,tumour overgrowth was reported in 34 out of the 250 cases with pooled rate of tumour overgrowth of 11.2%(95%CI: 3.7%-22.1%; I2 = 82.2%). No funnel plot asymmetry to suggest publication bias(bias = 0.39,P = 0.78). In the sensitivity analysis all results were largely similar between the fixed and random effects models.CONCLUSION The double-layered nitinol stent provides immediate relief of malignant dysphagia with low rates of stent migration and tumour展开更多
Based on non-Darcian flow law described by exponent and threshold gradient within a double-layered soil, the classic theory of one-dimensional consolidation of double-layered soil was modified to consider the change o...Based on non-Darcian flow law described by exponent and threshold gradient within a double-layered soil, the classic theory of one-dimensional consolidation of double-layered soil was modified to consider the change of vertical total stress with depth and time together. Because of the complexity of governing equations, the numerical solutions were obtained in detail by finite difference method. Then, the numerical solutions were compared with the analytical solutions in condition that non-Darcian flow law was degenerated to Dary's law, and the comparison results show that numerical solutions are reliable. Finally, consolidation behavior of double-layered soil with different parameters was analyzed, and the results show that the consolidation rate of double-layered soil decreases with increasing the value of exponent and threshold of non-Darcian flow, and the exponent and threshold gradient of the first soil layer greatly influence the consolidation rate of double-layered soil. The larger the ratio of the equivalent water head of external load to the total thickness of double-layered soil, the larger the rate of the consolidation, and the similitude relationship in classical consolidation theory of double-layered soil is not satisfied. The other consolidation behavior of double-layered soil with non-Darcian flow is the same as that with Darcy's law.展开更多
The velocity structures of flow through vertically double-layered vegetation(VDLV)as well as single-layered rigid vegetation(SLV)were investigated computationally with a three-dimensional(3D)Reynolds stress turbulence...The velocity structures of flow through vertically double-layered vegetation(VDLV)as well as single-layered rigid vegetation(SLV)were investigated computationally with a three-dimensional(3D)Reynolds stress turbulence model,using the computational fluid dynamics(CFD)code FLUENT.The detailed velocity distribution was explored with a varying initial Froude number(Fr),with consideration of the steady subcritical flow conditions of an inland tsunami.In VDLV flows,the numerical model successfully captured the inflection point in the profiles of mean streamwise velocities in the mixing-layer region around the top of short submerged vegetation.An upward and downward movement of flow occurred at the positions located just behind the tall and short vegetation,respectively.Overall,higher streamwise velocities were observed in the upper vegetation layer due to high porosity,with Pr=98%(sparse vegetation,where Pr is the porosity),as compared to those in the lower vegetation layer,which had comparatively low porosity,with Pr=91%(dense vegetation).A rising trend of velocities was found as the flow passed through the vegetation region,followed by a clear sawtooth distribution,as compared to the regions just upstream and downstream of vegetation where the flow was almost uniform.In VDLV flows,a rising trend in the flow resistance was observed with the increase in the initial Froude number,i.e.,Fr?0.67,0.70,and 0.73.However,the flow resistance in the case of SLV was relatively very low.The numerical results also show the flow structures within the vicinity of short and tall vegetation,which are difficult to attain through experimental measurements.展开更多
To further investigate the one-dimensional(1D)rheological consolidation mechanism of double-layered soil,the fractional derivative Merchant model(FDMM)and the non-Darcian flow model with the non-Newtonian index are re...To further investigate the one-dimensional(1D)rheological consolidation mechanism of double-layered soil,the fractional derivative Merchant model(FDMM)and the non-Darcian flow model with the non-Newtonian index are respectively introduced to describe the deformation of viscoelastic soil and the flow of pore water in the process of consolidation.Accordingly,an 1D rheological consolidation equation of double-layered soil is obtained,and its numerical analysis is performed by the implicit finite difference method.In order to verify its validity,the numerical solutions by the present method for some simplified cases are compared with the results in the related literature.Then,the influence of the revelent parameters on the rheological consolidation of double-layered soil are investigated.Numerical results indicate that the parameters of non-Darcian flow and FDMM of the first soil layer greatly influence the consolidation rate of double-layered soil.As the decrease of relative compressibility or the increase of relative permeability between the lower soil and the upper soil,the dissipation rate of excess pore water pressure and the settlement rate of the ground will be accelerated.Increasing the relative thickness of soil layer with high permeability or low compressibility will also accelerate the consolidation rate of double-layered soil.展开更多
As an important scheme of future global mobile satellite communication systems to provide multimedia service, a Double-Layer Satellite Network （DLSN） with MEO satellites and LEO satellites is proposed. The Inter-Orb...As an important scheme of future global mobile satellite communication systems to provide multimedia service, a Double-Layer Satellite Network （DLSN） with MEO satellites and LEO satellites is proposed. The Inter-Orbit-Links （IOLs） between layers is an essential factor, which affects the performances of the DLSN systems. Considering certain constellation parameters, the geometric characteristics of IOLs are described and the connectivity of MEO satellites and LEO satellites in the DLSN is analyzed. By computer simulation, the results show that IOLs should be selectively established according to certain parameters rather than the simple in-sight principle.展开更多
The time-sequenced damage behavior of the reactive projectile impacting double-layer plates is discussed.The analytical model considering the combined effect of kinetic and chemical energy is developed to reveal the d...The time-sequenced damage behavior of the reactive projectile impacting double-layer plates is discussed.The analytical model considering the combined effect of kinetic and chemical energy is developed to reveal the damage mechanism.The influences of impact velocity and reactive projectile chemical characteristics on the damage effect are decoupled analyzed based on this model.These analyses indicate that the high energy releasing efficiency and fast reaction propagation velocity of the reactive projectile are conducive to enhancing the damage effect.The experiments with various reactive projectiles impact velocity increasing from 702 to 1385 m/s were conducted to verify this model.The experimental results presented that,the damage hole radius of the rear-plate increases with the increase of impact velocity.At the impact velocity of 1350 m/s,the radius of damage hole formed by PTFE/Al/Bi_(2)O_(3),PTFE/Al/MoO_(3),PTFE/Al/Fe_(2)O_(3)projectile on the rear-plate become smaller in sequence.These results are consistent with the analytical model prediction,demonstrating that this model can predict the damage effect quantitatively.This work is of constructive significance to the application of reactive projectiles.展开更多
This paper proposes a type of double-layer charge liner fabricated using chemical vapor deposition(CVD)that has tungsten as its inner liner.The feasibility of this design was evaluated through penetration tests.Double...This paper proposes a type of double-layer charge liner fabricated using chemical vapor deposition(CVD)that has tungsten as its inner liner.The feasibility of this design was evaluated through penetration tests.Double-layer charge liners were fabricated by using CVD to deposit tungsten layers on the inner surfaces of pure T2 copper liners.The microstructures of the tungsten layers were analyzed using a scanning electron microscope(SEM).The feasibility analysis was carried out by pulsed X-rays,slug-retrieval test and static penetration tests.The shaped charge jet forming and penetration law of inner tungsten-coated double-layer liner were studied by numerical simulation method.The results showed that the double-layer liners could form well-shaped jets.The errors between the X-ray test results and the numerical results were within 11.07%.A slug-retrieval test was found that the retrieved slug was similar to a numerically simulated slug.Compared with the traditional pure copper shaped charge jet,the penetration depth of the double-layer shaped charge liner increased by 11.4% and>10.8% respectively.In summary,the test results are good,and the numerical simulation is in good agreement with the test,which verified the feasibility of using the CVD method to fabricate double-layer charge liners with a high-density and high-strength refractory metal as the inner liner.展开更多
A simple, precise and accurate method was developed and validated for the determination of allicin release from alliin/alliinase double-layer tablets. According to Appendix XC Ⅱ of Chinese Pharmacopoeia 2010 edition ...A simple, precise and accurate method was developed and validated for the determination of allicin release from alliin/alliinase double-layer tablets. According to Appendix XC Ⅱ of Chinese Pharmacopoeia 2010 edition Volume II, a small glass-method was adopted at the rotational speed of 100 r/min using 100 mL phosphate buffer （pH 6.8） as release medium. The release amount was determined by HPLC with a C18 column （250 mm × 4.6 mm, 5 μm） using the mobile phase consisting of methanol -0.4% carboxylic acid （65：35） at a flow rate of 1 mL/min and UV detection at 242 nm. The current method demonstrates good linearity over the range 4.052- 405.2 μg/mL （r2=0.9999） with an average recovery of 105.5%（RSD= 1.25%）. The accumulative release of alliin/alliinase double-layer tablets had good homogeneity for withinand betweenbatches. The method established is simple, accurate and repeatable for the determination of allicin release from alliin/alliinase double-layer tablets.展开更多
To understand the mesoscopic mechanism of clayey soil in view of macroscopic behavior, it is essential to quantitatively calculate the electric double-layer repulsion between arbitrarily inclined clay particles.Howeve...To understand the mesoscopic mechanism of clayey soil in view of macroscopic behavior, it is essential to quantitatively calculate the electric double-layer repulsion between arbitrarily inclined clay particles.However, suitable calculation methods with high efficiency and accuracy are still rare at present in literature. Based on a great number of numerical calculations of the repulsion between two inclined platy clay particles, explicit empirical formulae for estimating electric double-layer repulsion between clay particles are put forward. Comparison between the empirical solutions and corresponding numerical results shows that the proposed formulae have a reasonable accuracy, and application of the presented formula is easy and efficient.展开更多
Based on analysis of the main forming methods for double-layer tube,a new short-term forming process called thixo-co-extrusion was put forward in producing double-layer tube by combining the semi-solid forming technol...Based on analysis of the main forming methods for double-layer tube,a new short-term forming process called thixo-co-extrusion was put forward in producing double-layer tube by combining the semi-solid forming technology and multi-billet extrusion technology.By means of forward extrusion with shaft,a finite element model of thixo-co-extrusion with A356/AZ91 was constructed by ABAQUS FEM software.The distributions of temperature field and velocity field as well as the contact force during thixo-co-extrusion were studied.The diffusion on the interfaces between inner and outer metals was analyzed.The simulation results show that,in the beginning of thixo-co-extrusion,the uneven wall thickness can appear.To thickness ratio of 5:5,a double layer tube with good inner and outer wall combination can be realized if VA356 is 0.12 m/s and VAZ91 is 0.20 m/s.展开更多
For delivering the nanoscaled extraordinary characteristics in macroscopical bulk,it is essential to integrate two-dimensional nanosheets into threedimensional(3D)porous monoliths,alternatively called as 3D architectu...For delivering the nanoscaled extraordinary characteristics in macroscopical bulk,it is essential to integrate two-dimensional nanosheets into threedimensional(3D)porous monoliths,alternatively called as 3D architectures,3D networks,or aerogels.The intersupported structure of porous monolithic 3D graphene(3DG)can prevent aggregation or restacking of graphene individuals,and the interconnected sp^(2) network of 3DG not only can provide the highway for the transport of electron/phonon but also can present continual cavities/channels for mass transfer.This review summarizes the synthesis methodology of 3DG porous monoliths and highlights the application for electric double-layer capacitors.Present challenges and future prospects about the manufacture and application of 3DG are also discussed.展开更多
文摘高压电缆长期过热可能导致绝缘热击穿,进而影响电网的稳定性。然而,当前研究主要集中在传统预测模型上,忽略了温度数据的复杂性和动态特征。为了解决此问题,提出一种基于多尺度Patch与卷积交互的电缆温度预测模型(MSP-CI)。首先,采用通道重组采样方法降低输入维度,并构建多尺度Patch分支结构,以实现复杂时间序列的解耦;其次,结合序列分解与卷积交互策略,分别提取粗粒度Patch的宏观信息与细粒度Patch的微观信息;最后,构建注意力融合模块,以动态平衡宏观与微观信息的权重,并得到最终的预测结果。在真实高压电缆温度数据集上的实验结果表明,MSP-CI相较于TimeMixer、PatchTST(Patch Time Series Transformer)和MSGNet(Multi-Scale interseries Graph Network)等基线模型,在均方误差(MSE)上下降了7.02%~34.87%,在平均绝对误差(MAE)上下降了5.15%~32.04%。可见,MSP-CI能有效提升电缆温度预测的准确率,为电力调度运行提供依据。
基金supported by National Research Foundation of Korea(NRF)grants funded by the Korean government(MSIT)(No.RS-2023-00256265,RS-2024-00352352,RS-2024-00405818)the Korean Fund for Regenerative Medicine(KFRM)grant funded by the Korea government(the Ministry of Science and ICT,the Ministry of Health&Welfare).(No.25A0102L1)support from the Market-led K-sensor technology program(RS-2022-00154781,Development of large-area wafer-level flexible/stretchable hybrid sensor platform technology for form factor-free highly integrated convergence sensor),funded By the Ministry of Trade,Industry&Energy(MOTIE,Korea).
文摘Microneedles(MNs)have been extensively investigated for transdermal delivery of large-sized drugs,including proteins,nucleic acids,and even extracellular vesicles(EVs).However,for their sufficient skin penetration,conventional MNs employ long needles(≥600μm),leading to pain and skin irritation.Moreover,it is critical to stably apply MNs against complex skin surfaces for uniform nanoscale drug delivery.Herein,a dually amplified transdermal patch(MN@EV/SC)is developed as the stem cell-derived EV delivery platform by hierarchically integrating an octopusinspired suction cup(SC)with short MNs(≤300μm).While leveraging the suction effect to induce nanoscale deformation of the stratum corneum,MN@EV/SC minimizes skin damage and enhances the adhesion of MNs,allowing EV to penetrate deeper into the dermis.When MNs of various lengths are applied to mouse skin,the short MNs can elicit comparable corticosterone release to chemical adhesives,whereas long MNs induce a prompt stress response.MN@EV/SC can achieve a remarkable penetration depth(290μm)for EV,compared to that of MN alone(111μm).Consequently,MN@EV/SC facilitates the revitalization of fibroblasts and enhances collagen synthesis in middle-aged mice.Overall,MN@EV/SC exhibits the potential for skin regeneration by modulating the dermal microenvironment and ensuring patient comfort.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12074213 and 11574108)the National Key R&D Program of China(Grant No.2022YFA1403103)+2 种基金the Major Basic Program of Natural Science Foundation of Shandong Province(Grant No.ZR2021ZD01)the Natural Science Foundation of Shandong Province(Grant No.ZR2023MA082)the Project of Introduction and Cultivation for Young Innovative Talents in Colleges and Universities of Shandong Province。
文摘Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigating M_(2)N_(2)(M=Nb,Ta)with DLHC structure using first-principles calculations.Our results show that M_(2)N_(2)are stable and metallic,exhibiting superconducting behavior.Specifically,Nb_(2)N_(2)and Ta_(2)N_(2)display superconducting transition temperatures of 6.8 K and 8.8 K,respectively.Their electron-phonon coupling is predominantly driven by the coupling between metal d-orbitals and low-frequency metal-dominated vibration modes.Interestingly,two compounds also exhibit non-trivial band topology.Thus,M_(2)N_(2)are promising platforms for studying the interplay between topology and superconductivity and fill the gap in superconductivity research for DLHC materials.
基金financially supported by the Science and Technology Bureau of Ali Prefecture,project named“Assessing the Carbon Sequestration and Carbon Sink Enhancement Potential of Natural Ecosystems in Ali Region(QYXTZX-AL2022-05)”。
文摘The alpine grassland vegetation on the Qinghai-Tibet Plateau is composed of plant patches in varied sizes.It remains uncertain whether vegetation recovery following grazing exclusion(GE)in degraded grasslands is driven by increases in patches number(NP),patch size(PS),or both.We based our predictions on two hypotheses:GE intensifies plant competition,and facilitation prevails near patches while competition prevails in interpatch spaces.We predicted that the NP would remain stable or decrease and PS would increase under GE treatment.To evaluate these predictions,we conducted a study in six lightly degraded alpine grasslands under free grazing(FG)conditions in Bangor County,Xizang Autonomous Region,China,with corresponding GE treatments using transects in 2017 and 2018.Results revealed that four sites in 2017 and five sites in 2018 had reduced NP and increased PS,with probabilities of 0.033(2017)and 0.004(2018),respectively,and a joint probability of 0.0001 under the null hypothesis that GE does not affect NP or PS.The NP reduction was solely due to the decrease in small patch sizes.An increase in PS was common across species,and a predominant tendency for NP reduction was observed among species across the sites.The overall changes in NP and PS were primarily driven by the three most abundant species(contributing more than 60%in both years),rather than by shifts in floristic composition.Our findings highlight that vegetation recovery in Bangor alpine steppes following GE relies solely on the expansion of existing patches rather than the recruitment of new ones in interpatch gaps.We recommend prioritizing growth-promoting measures,such as nutrient or water management,over seed addition when assisting with GE for restoring lightly degraded grasslands.
文摘In this study,we developed a novel bilayered scaffold consisting of a bottom layer composed of the Decellularized Bovine Pericardium(DP)coated with Polyaniline Nanoparticles(PANINPs)and a top layer made of an electrospun Poly(lactic-co-glycolic acid)/Gelatin(PLGA/Gel)membrane incorporated with Vascular Endothelial Growth Fac-tor(VEGF)and hawthorn extract.Functionally,the DP supplies native Extracellular Matrix(ECM)components and mechanical support,while PANINPs provide conductivity.The electrospun PLGA/Gel layer mimics fibrous ECM.It incorporates bioactives,with VEGF promoting pro-angiogenic stimulation and hawthorn extract enhanc-ing anticoagulant activity,as well as increasing surface hydrophilicity.The tissue adhesive ensures the interfacial integrity between the two layers.Decellularization efficiency was confirmed histologically using 4',6-diamidino-2-phenylindole(DAPI)and Hematoxylin-Eosin(H&E)staining.The DP exhibited a DNA content of 115.9±47.8 ng/mg DNA,compared to 982.88±395.42 ng/mg in Native Pericardium(NP).The PANINPs had an average par-ticle size of 104.94±13.7 nm.The conductivity of PANINPs-coated decellularized pericardium was measured to be 9.093±8.6×10-4 S/cm using the four-point probe method.PLGA/Gel membranes containing hawthorn extract(1%,5%,10%,and 15%w/v)and VEGF(0.1μg/mL,0.5μg/mL,and 1μg/mL)were fabricated by electrospinning,result-ing in fiber diameters between 850 and 1200 nm and pore sizes between 14 and 20μm.The anticoagulant efficiency of the membranes containing hawthorn extract reached 430 s in the Activated Partial Thromboplastin Time Assay(aPTT).Mechanical testing revealed a tensile strength of 22.70±6.33 MPa,an elongation of 53.58±10.63%,and Young's modulus of 0.67±0.10 MPa.The scaffold also exhibited over 91%cell viability and excellent cardiomyo-cyte adhesion.The hemolysis ratio was determined to be 0.421±0.191%,which confirms its blood compatibility.Our results indicate that the proposed bilayered scaffold can be a promising candidate for cardiac patch applications.
文摘In the version of the article originally published in the volume 68,issue 12,2025 of Sci China Mater(pages 4413-4422,https://doi.org/10.1007/s40843-025-3667-7),the Chinese name of the co-first author(肖天孝)was incorrect.The corrected Chinese name is:肖天笑.
基金The Special Project of the Ministry of Construction ofChina (No.20060909).
文摘In order to establish the relationship between the measured dynamic response and the health status of long-span bridges, a double-layer model updating method for steel-concrete composite beam cable-stayed bridges is proposed. Measured frequencies are selected as the first-layer reference data, and the mass of the bridge deck, the grid density, the modulus of concrete and the ballast on the side span are modified by using a manual tuning technique. Measured global positioning system （GPS） data is selected as the second-layer reference data, and the degradation of the integral structure stiffness EI of the whole bridge is taken into account for the second-layer model updating by using the finite element iteration algorithm. The Nanpu Bridge in Shanghai is taken as a case to verify the applicability of the proposed model updating method. After the first-layer model updating, the standard deviation of modal frequencies is smaller than 7%. After the second-layer model updating, the error of the deflection of the mid-span is smaller than 10%. The integral structure stiffness of the whole bridge decreases about 20%. The research results show a good agreement between the calculated response and the measured response.
文摘In order to increase the fatigue life (FL) of road wheels (RW), a kind of double layer rubber flange (DLRF) is put forward. It consists of two layers of rubber, where metal wires are laid in the inner layer and the outer layer has no inlaid metal wires. Stress, strain and temperature field of DLRF were calculated with ANSYS finite element analysis (FEA) software, FL of DLRF RW was also computed with fracture mechanics fatigue theory. The results of computation indicate that the heat generated in RW's rubber flange (RF) can be reduced by the use of DLRF, and the FL of RW can be increased without affecting the mechanical intensity of RW.
文摘The aim of the study was to develop actarit double-layered osmotic pump tablets to overcome the weak points of actarit common tablets, such as short half-life and large plasma concentration fluctuations. Single factor experiment and orthogonal test were applied to optimize the formulation;the pharmacokinetic study was performed in beagle dogs adopting actarit common tablets as reference tablets. The optimal formulation was as follows: drug layer: 150 mg actarit, 240 mg PEO-N80, 50 mg NaCl;push layer: 140 mg PEO-WSR303, 20 mg NaCl;coating solution: 30 g cellulose acetate and 6 g PEG 4000 in 1000 ml 94% acetone solution, 60 mg coating weight gain. The pharmacokinetic study showed that T max was prolonged by the contrast of commercial common tablets with constant drug release rate, but the bioavailability was equivalent. And a good in vivo –in vitro correlation of the actarit osmotic pump tablets was also established. The designed actarit osmotic pump tablets can be applied for rheumatoid arthritis, proposing a promising replacement for the marked common products.
文摘AIM To investigate the efficacy of double-layered covered stent in the treatment of malignant oesophageal obstructions.METHODS A systematic review and meta-analysis was performed following the PRISMA process. Pub Med(Medline),EMBASE(Excerpta Medical Database),AMED(Allied and Complementary medicine Database),Scopus and online content,were searched for studies reporting on the Ni Ti-S polyurethane-covered double oesophageal stent for the treatment of malignant dysphagia. Weighted pooled outcomes were synthesized with a random effects model to account for clinical heterogeneity. All studies reporting the outcome of palliative management of dysphagia due to histologically confirmed malignant oesophageal obstruction using double-layered covered nitinol stent were included. The level of statistical significance was set at α = 0.05.RESULTS Six clinical studies comprising 250 patients in total were identified. Pooled technical success of stent insertion was 97.2%(95%CI: 94.8%-98.9%; I2 = 5.8%). Pooled complication rate was 27.6%(95%CI: 20.7%-35.2%; I2 = 41.9%). Weighted improvement of dysphagia on a scale of 0-5 scoring system was-2.00 [95%CI:-2.29%-(-1.72%); I2 = 87%]. Distal stent migration was documented in 10 out of the 250 cases examined.Pooled stent migration rate was 4.7%(95%CI: 2.5%-7.7%; I2 = 0%). Finally,tumour overgrowth was reported in 34 out of the 250 cases with pooled rate of tumour overgrowth of 11.2%(95%CI: 3.7%-22.1%; I2 = 82.2%). No funnel plot asymmetry to suggest publication bias(bias = 0.39,P = 0.78). In the sensitivity analysis all results were largely similar between the fixed and random effects models.CONCLUSION The double-layered nitinol stent provides immediate relief of malignant dysphagia with low rates of stent migration and tumour
基金Projects(50878191,51109092)supported by the National Natural Science Foundation of China
文摘Based on non-Darcian flow law described by exponent and threshold gradient within a double-layered soil, the classic theory of one-dimensional consolidation of double-layered soil was modified to consider the change of vertical total stress with depth and time together. Because of the complexity of governing equations, the numerical solutions were obtained in detail by finite difference method. Then, the numerical solutions were compared with the analytical solutions in condition that non-Darcian flow law was degenerated to Dary's law, and the comparison results show that numerical solutions are reliable. Finally, consolidation behavior of double-layered soil with different parameters was analyzed, and the results show that the consolidation rate of double-layered soil decreases with increasing the value of exponent and threshold of non-Darcian flow, and the exponent and threshold gradient of the first soil layer greatly influence the consolidation rate of double-layered soil. The larger the ratio of the equivalent water head of external load to the total thickness of double-layered soil, the larger the rate of the consolidation, and the similitude relationship in classical consolidation theory of double-layered soil is not satisfied. The other consolidation behavior of double-layered soil with non-Darcian flow is the same as that with Darcy's law.
文摘The velocity structures of flow through vertically double-layered vegetation(VDLV)as well as single-layered rigid vegetation(SLV)were investigated computationally with a three-dimensional(3D)Reynolds stress turbulence model,using the computational fluid dynamics(CFD)code FLUENT.The detailed velocity distribution was explored with a varying initial Froude number(Fr),with consideration of the steady subcritical flow conditions of an inland tsunami.In VDLV flows,the numerical model successfully captured the inflection point in the profiles of mean streamwise velocities in the mixing-layer region around the top of short submerged vegetation.An upward and downward movement of flow occurred at the positions located just behind the tall and short vegetation,respectively.Overall,higher streamwise velocities were observed in the upper vegetation layer due to high porosity,with Pr=98%(sparse vegetation,where Pr is the porosity),as compared to those in the lower vegetation layer,which had comparatively low porosity,with Pr=91%(dense vegetation).A rising trend of velocities was found as the flow passed through the vegetation region,followed by a clear sawtooth distribution,as compared to the regions just upstream and downstream of vegetation where the flow was almost uniform.In VDLV flows,a rising trend in the flow resistance was observed with the increase in the initial Froude number,i.e.,Fr?0.67,0.70,and 0.73.However,the flow resistance in the case of SLV was relatively very low.The numerical results also show the flow structures within the vicinity of short and tall vegetation,which are difficult to attain through experimental measurements.
基金Project(51578511)supported by the National Natural Science Foundation of China。
文摘To further investigate the one-dimensional(1D)rheological consolidation mechanism of double-layered soil,the fractional derivative Merchant model(FDMM)and the non-Darcian flow model with the non-Newtonian index are respectively introduced to describe the deformation of viscoelastic soil and the flow of pore water in the process of consolidation.Accordingly,an 1D rheological consolidation equation of double-layered soil is obtained,and its numerical analysis is performed by the implicit finite difference method.In order to verify its validity,the numerical solutions by the present method for some simplified cases are compared with the results in the related literature.Then,the influence of the revelent parameters on the rheological consolidation of double-layered soil are investigated.Numerical results indicate that the parameters of non-Darcian flow and FDMM of the first soil layer greatly influence the consolidation rate of double-layered soil.As the decrease of relative compressibility or the increase of relative permeability between the lower soil and the upper soil,the dissipation rate of excess pore water pressure and the settlement rate of the ground will be accelerated.Increasing the relative thickness of soil layer with high permeability or low compressibility will also accelerate the consolidation rate of double-layered soil.
基金National Natural Science Foundation of China(60532030)
文摘As an important scheme of future global mobile satellite communication systems to provide multimedia service, a Double-Layer Satellite Network （DLSN） with MEO satellites and LEO satellites is proposed. The Inter-Orbit-Links （IOLs） between layers is an essential factor, which affects the performances of the DLSN systems. Considering certain constellation parameters, the geometric characteristics of IOLs are described and the connectivity of MEO satellites and LEO satellites in the DLSN is analyzed. By computer simulation, the results show that IOLs should be selectively established according to certain parameters rather than the simple in-sight principle.
基金supported by the State Key Program of National Natural Science Foundation of China(Grant No.12132003)State Key Laboratory of Explosion Science and Technology(Grant No.QNKT20-07)。
文摘The time-sequenced damage behavior of the reactive projectile impacting double-layer plates is discussed.The analytical model considering the combined effect of kinetic and chemical energy is developed to reveal the damage mechanism.The influences of impact velocity and reactive projectile chemical characteristics on the damage effect are decoupled analyzed based on this model.These analyses indicate that the high energy releasing efficiency and fast reaction propagation velocity of the reactive projectile are conducive to enhancing the damage effect.The experiments with various reactive projectiles impact velocity increasing from 702 to 1385 m/s were conducted to verify this model.The experimental results presented that,the damage hole radius of the rear-plate increases with the increase of impact velocity.At the impact velocity of 1350 m/s,the radius of damage hole formed by PTFE/Al/Bi_(2)O_(3),PTFE/Al/MoO_(3),PTFE/Al/Fe_(2)O_(3)projectile on the rear-plate become smaller in sequence.These results are consistent with the analytical model prediction,demonstrating that this model can predict the damage effect quantitatively.This work is of constructive significance to the application of reactive projectiles.
基金funded by the China Postdoctoral Science Foundation(Grant No.2022M721614)the opening project of State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology(Grant No.KFJJ23-07M)。
文摘This paper proposes a type of double-layer charge liner fabricated using chemical vapor deposition(CVD)that has tungsten as its inner liner.The feasibility of this design was evaluated through penetration tests.Double-layer charge liners were fabricated by using CVD to deposit tungsten layers on the inner surfaces of pure T2 copper liners.The microstructures of the tungsten layers were analyzed using a scanning electron microscope(SEM).The feasibility analysis was carried out by pulsed X-rays,slug-retrieval test and static penetration tests.The shaped charge jet forming and penetration law of inner tungsten-coated double-layer liner were studied by numerical simulation method.The results showed that the double-layer liners could form well-shaped jets.The errors between the X-ray test results and the numerical results were within 11.07%.A slug-retrieval test was found that the retrieved slug was similar to a numerically simulated slug.Compared with the traditional pure copper shaped charge jet,the penetration depth of the double-layer shaped charge liner increased by 11.4% and>10.8% respectively.In summary,the test results are good,and the numerical simulation is in good agreement with the test,which verified the feasibility of using the CVD method to fabricate double-layer charge liners with a high-density and high-strength refractory metal as the inner liner.
文摘A simple, precise and accurate method was developed and validated for the determination of allicin release from alliin/alliinase double-layer tablets. According to Appendix XC Ⅱ of Chinese Pharmacopoeia 2010 edition Volume II, a small glass-method was adopted at the rotational speed of 100 r/min using 100 mL phosphate buffer （pH 6.8） as release medium. The release amount was determined by HPLC with a C18 column （250 mm × 4.6 mm, 5 μm） using the mobile phase consisting of methanol -0.4% carboxylic acid （65：35） at a flow rate of 1 mL/min and UV detection at 242 nm. The current method demonstrates good linearity over the range 4.052- 405.2 μg/mL （r2=0.9999） with an average recovery of 105.5%（RSD= 1.25%）. The accumulative release of alliin/alliinase double-layer tablets had good homogeneity for withinand betweenbatches. The method established is simple, accurate and repeatable for the determination of allicin release from alliin/alliinase double-layer tablets.
基金the financial support from"The Fundamental Research Funds for the Central Universities"(Grant No.2017XKQY052)
文摘To understand the mesoscopic mechanism of clayey soil in view of macroscopic behavior, it is essential to quantitatively calculate the electric double-layer repulsion between arbitrarily inclined clay particles.However, suitable calculation methods with high efficiency and accuracy are still rare at present in literature. Based on a great number of numerical calculations of the repulsion between two inclined platy clay particles, explicit empirical formulae for estimating electric double-layer repulsion between clay particles are put forward. Comparison between the empirical solutions and corresponding numerical results shows that the proposed formulae have a reasonable accuracy, and application of the presented formula is easy and efficient.
基金Project (2007AA03Z119) supported by the National High Technology Research and Development Program of ChinaProjects (2102029,2072012) supported by Beijing Natural Science Foundation
文摘Based on analysis of the main forming methods for double-layer tube,a new short-term forming process called thixo-co-extrusion was put forward in producing double-layer tube by combining the semi-solid forming technology and multi-billet extrusion technology.By means of forward extrusion with shaft,a finite element model of thixo-co-extrusion with A356/AZ91 was constructed by ABAQUS FEM software.The distributions of temperature field and velocity field as well as the contact force during thixo-co-extrusion were studied.The diffusion on the interfaces between inner and outer metals was analyzed.The simulation results show that,in the beginning of thixo-co-extrusion,the uneven wall thickness can appear.To thickness ratio of 5:5,a double layer tube with good inner and outer wall combination can be realized if VA356 is 0.12 m/s and VAZ91 is 0.20 m/s.
基金The authors acknowledge the support from National Natural Science Foundation of China(51972168,51672124,21603096)Program for Innovative Talents and Entrepreneur in Jiangsu,State Key Laboratory of Catalytic Materials and Reaction Engineering(RIPP,SINOPEC),and Technical Center of Nano Fabrication and Characterization of Nanjing University.
文摘For delivering the nanoscaled extraordinary characteristics in macroscopical bulk,it is essential to integrate two-dimensional nanosheets into threedimensional(3D)porous monoliths,alternatively called as 3D architectures,3D networks,or aerogels.The intersupported structure of porous monolithic 3D graphene(3DG)can prevent aggregation or restacking of graphene individuals,and the interconnected sp^(2) network of 3DG not only can provide the highway for the transport of electron/phonon but also can present continual cavities/channels for mass transfer.This review summarizes the synthesis methodology of 3DG porous monoliths and highlights the application for electric double-layer capacitors.Present challenges and future prospects about the manufacture and application of 3DG are also discussed.
