Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigati...Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigating M_(2)N_(2)(M=Nb,Ta)with DLHC structure using first-principles calculations.Our results show that M_(2)N_(2)are stable and metallic,exhibiting superconducting behavior.Specifically,Nb_(2)N_(2)and Ta_(2)N_(2)display superconducting transition temperatures of 6.8 K and 8.8 K,respectively.Their electron-phonon coupling is predominantly driven by the coupling between metal d-orbitals and low-frequency metal-dominated vibration modes.Interestingly,two compounds also exhibit non-trivial band topology.Thus,M_(2)N_(2)are promising platforms for studying the interplay between topology and superconductivity and fill the gap in superconductivity research for DLHC materials.展开更多
In order to solve the problem that sweat flows back into the internal layer from the external layer in double-layer knits, a fabric structure model is set up and the conditions that keep the sweat from flowing back in...In order to solve the problem that sweat flows back into the internal layer from the external layer in double-layer knits, a fabric structure model is set up and the conditions that keep the sweat from flowing back into the internal layer from the external layer are presented. It can be used to improve the design of the double-layer knits theoretically.展开更多
CB chondrite is a class of meteorite rich in metal composition,and its characteristics are obviously different from other chondrite groups.These meteorites are distinguished by their content of up to 60% to 70%FeNi me...CB chondrite is a class of meteorite rich in metal composition,and its characteristics are obviously different from other chondrite groups.These meteorites are distinguished by their content of up to 60% to 70%FeNi metals and sulfides,in addition to their extreme lack of volatile and moderately volatile elements,less refractory inclusions,and almost no fine-grained matrix.Sierra Gorda 013(SG013)is a metal-rich chondritic meteorite of the CBa type.It has two different lithologies within SG 013:Lithology 1and Lithology 2.Lithology 1 is an anomalous CBa chondrite containing chromite-pyroxene complex assemblage,whereas Lithology 2 is featured by recrystallization with small chondrules and contains much less iron nickel metal than Lithology 1.Although the two lithologies have essentially the same oxygen isotope composition,their structures are different from each other,suggesting that they probably underwent distinct formation and evolution processes from common precursors.In this study,the mineralogy of SG013 chondrites is studied by means of petrographic observation,semi-quantitative analysis of chemical composition,fabric identification of minerals and integrated mineral phase analysis,while studying the mineralogy of SG 013,and the fabric characteristics of SG 013 are studied in detail.Different from previous studies,here we find that Lithology 1 of SG 013 contains non-porphyritic chondrules and metallic silicate globules,while Lithology 2 not only contains nonporphyritic chondrules and metallic-silicate globules,but also porphyritic chondrules.In this thesis,Electron backscatter diffraction(EBSD)analysis of magnesium olivine in metal-silicate globules and porphyritic chondrules in L2 of SG 013 shows that some magnesium olivine form under conditions of lower temperature and faster strain rate during uniaxial compression,where deformation of the olivine is dominated by dislocation glide.However,at higher temperatures and slower strain rates,the fabric of B-axis([100])is concentrated,indicating that the porphyritic chondrules may be dominated by the compaction of olivine particles,leading to dynamic recrystallization in the peripheral region or outer layer of the magnesium olivine crystal.New grains formed by dynamic recrystallization occur at the edges of residual grains and,their orientation is controlled by stress.It is found that the formation position of magnesium olivine in different chondrules of SG 013 from the inside out,with the gradual reduction of stress and the gradual increase of temperature,these local physicochemical changes reveal the complex thermal history and dynamic processes that chondrules undergo during their formation and evolution.展开更多
Fabric defect detection plays a vital role in ensuring textile quality.However,traditional manual inspection methods are often inefficient and inaccurate.To overcome these limitations,we propose FD-YOLO,an enhanced li...Fabric defect detection plays a vital role in ensuring textile quality.However,traditional manual inspection methods are often inefficient and inaccurate.To overcome these limitations,we propose FD-YOLO,an enhanced lightweight detection model based on the YOLOv11n framework.The proposed model introduces the Bi-level Routing Attention(BRAttention)mechanism to enhance defect feature extraction,enabling more detailed feature representation.It proposes Deep Progressive Cross-Scale Fusion Neck(DPCSFNeck)to better capture smallscale defects and incorporates a Multi-Scale Dilated Residual(MSDR)module to strengthen multi-scale feature representation.Furthermore,a Shared Detail-Enhanced Lightweight Head(SDELHead)is employed to reduce the risk of gradient explosion during training.Experimental results demonstrate that FD-YOLO achieves superior detection accuracy and Lightweight performance compared to the baseline YOLOv11n.展开更多
Off-axis aspherical mirrors are widely used in optical systems and precision measuring instruments,whereas off-axis aspherical mirrors with large sizes and off-axis are used in large optical systems such as astronomic...Off-axis aspherical mirrors are widely used in optical systems and precision measuring instruments,whereas off-axis aspherical mirrors with large sizes and off-axis are used in large optical systems such as astronomical telescopes and radio telescopes.However,if the off-axis amount of an off-axis aspherical mirror exceeds the capability of the machine tool,traditional rotary-turning machining methods are not applicable,and advanced computerized numerical control(CNC)machining methods,such as the slow-tool-servo method,must be im-plemented.This article proposes a non-conventional offset(NCO)fabrication method based on slow-tool-servo single-point diamond turning for machining off-axis aspherical surfaces with large off-axis amounts.This method is theoretically applicable to the machining of off-axis aspherical surfaces with any off-axis amount.NCO fab-rication is a simpler and more efficient path-planning solution for machining individual off-axis parabolic sur-faces.In addition,corresponding solutions for other types of aspherical surfaces are proposed using the NCO method.The turning depths of workpieces with different off-axis amounts at the same machining position are analyzed and compared.A specific measurement scheme for the NCO method is presented,and the experimental results indicate that the PV and RMS form errors are 0.658μm and 60 nm,respectively.This work demonstrates that the NCO method can effectively deal with the machining challenges of off-axis aspherical structures with large off-axis amounts.展开更多
The accretion of the Panama-ChocóBlock to the South American Plate partially drove the geological setting of the northern Andes.This event occurred in different collisional stages that are recorded in Oligocene-m...The accretion of the Panama-ChocóBlock to the South American Plate partially drove the geological setting of the northern Andes.This event occurred in different collisional stages that are recorded in Oligocene-middle Miocene deformed rocks of the inter-Andean valley between the Western and Central Cordilleras of Colombia.However,uncertainty remains about the age of the latest accretionary phases of the Panama-ChocóBlock.Poorly studied late Miocene volcanic rocks within the northern inter-Andean valley may provide key information to constrain the temporality of that final collision.Here,we study the deformational features of the~12-6 Ma extrusive rocks of the Combia Volcanic Province located in the northwestern Andes(Colombia).We present anisotropy of magnetic susceptibility(AMS)data for pyroclastic and volcanic rocks within the AmagáBasin,an inter-Andean depression with Oligocene-middle Miocene sedimentary rocks that recorded NW-SE compression and NE-SW simple shear caused by the Panama-ChocóBlock collision.We identified that the magnetic fabrics of the extrusive rocks of the Combia Volcanic Province reveal flow directions that indicate the occurrence of ancient volcanoes in the central axis of the AmagáBasin.Some of these fabrics do not contain any deformational features,whereas others record the same structural regime as the Oligocene-middle Miocene sedimentary rocks.We infer that variations in the intensity of the deformation promoted late Miocene local fault reactivations that,in contrast to the Oligocene-middle Miocene deformational events,did not affect the entire AmagáBasin.Age differences among the studied sections can also explain the different deformational patterns identified in the basin.Both interpretations suggest that the most significant collisional events of the Panama-ChocóBlock occurred in the Oligocene-middle Miocene,whereas the formation of the Combia Volcanic Province may have either followed or coincided with the latest stages of the accretion.展开更多
In order to establish the relationship between the measured dynamic response and the health status of long-span bridges, a double-layer model updating method for steel-concrete composite beam cable-stayed bridges is p...In order to establish the relationship between the measured dynamic response and the health status of long-span bridges, a double-layer model updating method for steel-concrete composite beam cable-stayed bridges is proposed. Measured frequencies are selected as the first-layer reference data, and the mass of the bridge deck, the grid density, the modulus of concrete and the ballast on the side span are modified by using a manual tuning technique. Measured global positioning system （GPS） data is selected as the second-layer reference data, and the degradation of the integral structure stiffness EI of the whole bridge is taken into account for the second-layer model updating by using the finite element iteration algorithm. The Nanpu Bridge in Shanghai is taken as a case to verify the applicability of the proposed model updating method. After the first-layer model updating, the standard deviation of modal frequencies is smaller than 7%. After the second-layer model updating, the error of the deflection of the mid-span is smaller than 10%. The integral structure stiffness of the whole bridge decreases about 20%. The research results show a good agreement between the calculated response and the measured response.展开更多
In order to increase the fatigue life (FL) of road wheels (RW), a kind of double layer rubber flange (DLRF) is put forward. It consists of two layers of rubber, where metal wires are laid in the inner layer and the ou...In order to increase the fatigue life (FL) of road wheels (RW), a kind of double layer rubber flange (DLRF) is put forward. It consists of two layers of rubber, where metal wires are laid in the inner layer and the outer layer has no inlaid metal wires. Stress, strain and temperature field of DLRF were calculated with ANSYS finite element analysis (FEA) software, FL of DLRF RW was also computed with fracture mechanics fatigue theory. The results of computation indicate that the heat generated in RW's rubber flange (RF) can be reduced by the use of DLRF, and the FL of RW can be increased without affecting the mechanical intensity of RW.展开更多
The aim of the study was to develop actarit double-layered osmotic pump tablets to overcome the weak points of actarit common tablets, such as short half-life and large plasma concentration fluctuations. Single factor...The aim of the study was to develop actarit double-layered osmotic pump tablets to overcome the weak points of actarit common tablets, such as short half-life and large plasma concentration fluctuations. Single factor experiment and orthogonal test were applied to optimize the formulation;the pharmacokinetic study was performed in beagle dogs adopting actarit common tablets as reference tablets. The optimal formulation was as follows: drug layer: 150 mg actarit, 240 mg PEO-N80, 50 mg NaCl;push layer: 140 mg PEO-WSR303, 20 mg NaCl;coating solution: 30 g cellulose acetate and 6 g PEG 4000 in 1000 ml 94% acetone solution, 60 mg coating weight gain. The pharmacokinetic study showed that T max was prolonged by the contrast of commercial common tablets with constant drug release rate, but the bioavailability was equivalent. And a good in vivo –in vitro correlation of the actarit osmotic pump tablets was also established. The designed actarit osmotic pump tablets can be applied for rheumatoid arthritis, proposing a promising replacement for the marked common products.展开更多
AIM To investigate the efficacy of double-layered covered stent in the treatment of malignant oesophageal obstructions.METHODS A systematic review and meta-analysis was performed following the PRISMA process. Pub Med(...AIM To investigate the efficacy of double-layered covered stent in the treatment of malignant oesophageal obstructions.METHODS A systematic review and meta-analysis was performed following the PRISMA process. Pub Med(Medline),EMBASE(Excerpta Medical Database),AMED(Allied and Complementary medicine Database),Scopus and online content,were searched for studies reporting on the Ni Ti-S polyurethane-covered double oesophageal stent for the treatment of malignant dysphagia. Weighted pooled outcomes were synthesized with a random effects model to account for clinical heterogeneity. All studies reporting the outcome of palliative management of dysphagia due to histologically confirmed malignant oesophageal obstruction using double-layered covered nitinol stent were included. The level of statistical significance was set at α = 0.05.RESULTS Six clinical studies comprising 250 patients in total were identified. Pooled technical success of stent insertion was 97.2%(95%CI: 94.8%-98.9%; I2 = 5.8%). Pooled complication rate was 27.6%(95%CI: 20.7%-35.2%; I2 = 41.9%). Weighted improvement of dysphagia on a scale of 0-5 scoring system was-2.00 [95%CI:-2.29%-(-1.72%); I2 = 87%]. Distal stent migration was documented in 10 out of the 250 cases examined.Pooled stent migration rate was 4.7%(95%CI: 2.5%-7.7%; I2 = 0%). Finally,tumour overgrowth was reported in 34 out of the 250 cases with pooled rate of tumour overgrowth of 11.2%(95%CI: 3.7%-22.1%; I2 = 82.2%). No funnel plot asymmetry to suggest publication bias(bias = 0.39,P = 0.78). In the sensitivity analysis all results were largely similar between the fixed and random effects models.CONCLUSION The double-layered nitinol stent provides immediate relief of malignant dysphagia with low rates of stent migration and tumour展开更多
Based on non-Darcian flow law described by exponent and threshold gradient within a double-layered soil, the classic theory of one-dimensional consolidation of double-layered soil was modified to consider the change o...Based on non-Darcian flow law described by exponent and threshold gradient within a double-layered soil, the classic theory of one-dimensional consolidation of double-layered soil was modified to consider the change of vertical total stress with depth and time together. Because of the complexity of governing equations, the numerical solutions were obtained in detail by finite difference method. Then, the numerical solutions were compared with the analytical solutions in condition that non-Darcian flow law was degenerated to Dary's law, and the comparison results show that numerical solutions are reliable. Finally, consolidation behavior of double-layered soil with different parameters was analyzed, and the results show that the consolidation rate of double-layered soil decreases with increasing the value of exponent and threshold of non-Darcian flow, and the exponent and threshold gradient of the first soil layer greatly influence the consolidation rate of double-layered soil. The larger the ratio of the equivalent water head of external load to the total thickness of double-layered soil, the larger the rate of the consolidation, and the similitude relationship in classical consolidation theory of double-layered soil is not satisfied. The other consolidation behavior of double-layered soil with non-Darcian flow is the same as that with Darcy's law.展开更多
The velocity structures of flow through vertically double-layered vegetation(VDLV)as well as single-layered rigid vegetation(SLV)were investigated computationally with a three-dimensional(3D)Reynolds stress turbulence...The velocity structures of flow through vertically double-layered vegetation(VDLV)as well as single-layered rigid vegetation(SLV)were investigated computationally with a three-dimensional(3D)Reynolds stress turbulence model,using the computational fluid dynamics(CFD)code FLUENT.The detailed velocity distribution was explored with a varying initial Froude number(Fr),with consideration of the steady subcritical flow conditions of an inland tsunami.In VDLV flows,the numerical model successfully captured the inflection point in the profiles of mean streamwise velocities in the mixing-layer region around the top of short submerged vegetation.An upward and downward movement of flow occurred at the positions located just behind the tall and short vegetation,respectively.Overall,higher streamwise velocities were observed in the upper vegetation layer due to high porosity,with Pr=98%(sparse vegetation,where Pr is the porosity),as compared to those in the lower vegetation layer,which had comparatively low porosity,with Pr=91%(dense vegetation).A rising trend of velocities was found as the flow passed through the vegetation region,followed by a clear sawtooth distribution,as compared to the regions just upstream and downstream of vegetation where the flow was almost uniform.In VDLV flows,a rising trend in the flow resistance was observed with the increase in the initial Froude number,i.e.,Fr?0.67,0.70,and 0.73.However,the flow resistance in the case of SLV was relatively very low.The numerical results also show the flow structures within the vicinity of short and tall vegetation,which are difficult to attain through experimental measurements.展开更多
To further investigate the one-dimensional(1D)rheological consolidation mechanism of double-layered soil,the fractional derivative Merchant model(FDMM)and the non-Darcian flow model with the non-Newtonian index are re...To further investigate the one-dimensional(1D)rheological consolidation mechanism of double-layered soil,the fractional derivative Merchant model(FDMM)and the non-Darcian flow model with the non-Newtonian index are respectively introduced to describe the deformation of viscoelastic soil and the flow of pore water in the process of consolidation.Accordingly,an 1D rheological consolidation equation of double-layered soil is obtained,and its numerical analysis is performed by the implicit finite difference method.In order to verify its validity,the numerical solutions by the present method for some simplified cases are compared with the results in the related literature.Then,the influence of the revelent parameters on the rheological consolidation of double-layered soil are investigated.Numerical results indicate that the parameters of non-Darcian flow and FDMM of the first soil layer greatly influence the consolidation rate of double-layered soil.As the decrease of relative compressibility or the increase of relative permeability between the lower soil and the upper soil,the dissipation rate of excess pore water pressure and the settlement rate of the ground will be accelerated.Increasing the relative thickness of soil layer with high permeability or low compressibility will also accelerate the consolidation rate of double-layered soil.展开更多
As an important scheme of future global mobile satellite communication systems to provide multimedia service, a Double-Layer Satellite Network （DLSN） with MEO satellites and LEO satellites is proposed. The Inter-Orb...As an important scheme of future global mobile satellite communication systems to provide multimedia service, a Double-Layer Satellite Network （DLSN） with MEO satellites and LEO satellites is proposed. The Inter-Orbit-Links （IOLs） between layers is an essential factor, which affects the performances of the DLSN systems. Considering certain constellation parameters, the geometric characteristics of IOLs are described and the connectivity of MEO satellites and LEO satellites in the DLSN is analyzed. By computer simulation, the results show that IOLs should be selectively established according to certain parameters rather than the simple in-sight principle.展开更多
The time-sequenced damage behavior of the reactive projectile impacting double-layer plates is discussed.The analytical model considering the combined effect of kinetic and chemical energy is developed to reveal the d...The time-sequenced damage behavior of the reactive projectile impacting double-layer plates is discussed.The analytical model considering the combined effect of kinetic and chemical energy is developed to reveal the damage mechanism.The influences of impact velocity and reactive projectile chemical characteristics on the damage effect are decoupled analyzed based on this model.These analyses indicate that the high energy releasing efficiency and fast reaction propagation velocity of the reactive projectile are conducive to enhancing the damage effect.The experiments with various reactive projectiles impact velocity increasing from 702 to 1385 m/s were conducted to verify this model.The experimental results presented that,the damage hole radius of the rear-plate increases with the increase of impact velocity.At the impact velocity of 1350 m/s,the radius of damage hole formed by PTFE/Al/Bi_(2)O_(3),PTFE/Al/MoO_(3),PTFE/Al/Fe_(2)O_(3)projectile on the rear-plate become smaller in sequence.These results are consistent with the analytical model prediction,demonstrating that this model can predict the damage effect quantitatively.This work is of constructive significance to the application of reactive projectiles.展开更多
This paper proposes a type of double-layer charge liner fabricated using chemical vapor deposition(CVD)that has tungsten as its inner liner.The feasibility of this design was evaluated through penetration tests.Double...This paper proposes a type of double-layer charge liner fabricated using chemical vapor deposition(CVD)that has tungsten as its inner liner.The feasibility of this design was evaluated through penetration tests.Double-layer charge liners were fabricated by using CVD to deposit tungsten layers on the inner surfaces of pure T2 copper liners.The microstructures of the tungsten layers were analyzed using a scanning electron microscope(SEM).The feasibility analysis was carried out by pulsed X-rays,slug-retrieval test and static penetration tests.The shaped charge jet forming and penetration law of inner tungsten-coated double-layer liner were studied by numerical simulation method.The results showed that the double-layer liners could form well-shaped jets.The errors between the X-ray test results and the numerical results were within 11.07%.A slug-retrieval test was found that the retrieved slug was similar to a numerically simulated slug.Compared with the traditional pure copper shaped charge jet,the penetration depth of the double-layer shaped charge liner increased by 11.4% and>10.8% respectively.In summary,the test results are good,and the numerical simulation is in good agreement with the test,which verified the feasibility of using the CVD method to fabricate double-layer charge liners with a high-density and high-strength refractory metal as the inner liner.展开更多
A simple, precise and accurate method was developed and validated for the determination of allicin release from alliin/alliinase double-layer tablets. According to Appendix XC Ⅱ of Chinese Pharmacopoeia 2010 edition ...A simple, precise and accurate method was developed and validated for the determination of allicin release from alliin/alliinase double-layer tablets. According to Appendix XC Ⅱ of Chinese Pharmacopoeia 2010 edition Volume II, a small glass-method was adopted at the rotational speed of 100 r/min using 100 mL phosphate buffer （pH 6.8） as release medium. The release amount was determined by HPLC with a C18 column （250 mm × 4.6 mm, 5 μm） using the mobile phase consisting of methanol -0.4% carboxylic acid （65：35） at a flow rate of 1 mL/min and UV detection at 242 nm. The current method demonstrates good linearity over the range 4.052- 405.2 μg/mL （r2=0.9999） with an average recovery of 105.5%（RSD= 1.25%）. The accumulative release of alliin/alliinase double-layer tablets had good homogeneity for withinand betweenbatches. The method established is simple, accurate and repeatable for the determination of allicin release from alliin/alliinase double-layer tablets.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12074213 and 11574108)the National Key R&D Program of China(Grant No.2022YFA1403103)+2 种基金the Major Basic Program of Natural Science Foundation of Shandong Province(Grant No.ZR2021ZD01)the Natural Science Foundation of Shandong Province(Grant No.ZR2023MA082)the Project of Introduction and Cultivation for Young Innovative Talents in Colleges and Universities of Shandong Province。
文摘Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigating M_(2)N_(2)(M=Nb,Ta)with DLHC structure using first-principles calculations.Our results show that M_(2)N_(2)are stable and metallic,exhibiting superconducting behavior.Specifically,Nb_(2)N_(2)and Ta_(2)N_(2)display superconducting transition temperatures of 6.8 K and 8.8 K,respectively.Their electron-phonon coupling is predominantly driven by the coupling between metal d-orbitals and low-frequency metal-dominated vibration modes.Interestingly,two compounds also exhibit non-trivial band topology.Thus,M_(2)N_(2)are promising platforms for studying the interplay between topology and superconductivity and fill the gap in superconductivity research for DLHC materials.
文摘In order to solve the problem that sweat flows back into the internal layer from the external layer in double-layer knits, a fabric structure model is set up and the conditions that keep the sweat from flowing back into the internal layer from the external layer are presented. It can be used to improve the design of the double-layer knits theoretically.
基金Chinese Academy of Science,XDB 41000000,Chunhui Li。
文摘CB chondrite is a class of meteorite rich in metal composition,and its characteristics are obviously different from other chondrite groups.These meteorites are distinguished by their content of up to 60% to 70%FeNi metals and sulfides,in addition to their extreme lack of volatile and moderately volatile elements,less refractory inclusions,and almost no fine-grained matrix.Sierra Gorda 013(SG013)is a metal-rich chondritic meteorite of the CBa type.It has two different lithologies within SG 013:Lithology 1and Lithology 2.Lithology 1 is an anomalous CBa chondrite containing chromite-pyroxene complex assemblage,whereas Lithology 2 is featured by recrystallization with small chondrules and contains much less iron nickel metal than Lithology 1.Although the two lithologies have essentially the same oxygen isotope composition,their structures are different from each other,suggesting that they probably underwent distinct formation and evolution processes from common precursors.In this study,the mineralogy of SG013 chondrites is studied by means of petrographic observation,semi-quantitative analysis of chemical composition,fabric identification of minerals and integrated mineral phase analysis,while studying the mineralogy of SG 013,and the fabric characteristics of SG 013 are studied in detail.Different from previous studies,here we find that Lithology 1 of SG 013 contains non-porphyritic chondrules and metallic silicate globules,while Lithology 2 not only contains nonporphyritic chondrules and metallic-silicate globules,but also porphyritic chondrules.In this thesis,Electron backscatter diffraction(EBSD)analysis of magnesium olivine in metal-silicate globules and porphyritic chondrules in L2 of SG 013 shows that some magnesium olivine form under conditions of lower temperature and faster strain rate during uniaxial compression,where deformation of the olivine is dominated by dislocation glide.However,at higher temperatures and slower strain rates,the fabric of B-axis([100])is concentrated,indicating that the porphyritic chondrules may be dominated by the compaction of olivine particles,leading to dynamic recrystallization in the peripheral region or outer layer of the magnesium olivine crystal.New grains formed by dynamic recrystallization occur at the edges of residual grains and,their orientation is controlled by stress.It is found that the formation position of magnesium olivine in different chondrules of SG 013 from the inside out,with the gradual reduction of stress and the gradual increase of temperature,these local physicochemical changes reveal the complex thermal history and dynamic processes that chondrules undergo during their formation and evolution.
基金financially supported by the Fujian Provincial Department of Science and Technology,the Collaborative Innovation Platform Project for Key Technologies of Smart Warehousing and Logistics Systems in the Fuzhou-Xiamen-Quanzhou National Independent Innovation Demonstration Zone(No.2025E3024).
文摘Fabric defect detection plays a vital role in ensuring textile quality.However,traditional manual inspection methods are often inefficient and inaccurate.To overcome these limitations,we propose FD-YOLO,an enhanced lightweight detection model based on the YOLOv11n framework.The proposed model introduces the Bi-level Routing Attention(BRAttention)mechanism to enhance defect feature extraction,enabling more detailed feature representation.It proposes Deep Progressive Cross-Scale Fusion Neck(DPCSFNeck)to better capture smallscale defects and incorporates a Multi-Scale Dilated Residual(MSDR)module to strengthen multi-scale feature representation.Furthermore,a Shared Detail-Enhanced Lightweight Head(SDELHead)is employed to reduce the risk of gradient explosion during training.Experimental results demonstrate that FD-YOLO achieves superior detection accuracy and Lightweight performance compared to the baseline YOLOv11n.
基金Supported by National Key R&D Program of China(Grant No.2023YFE0203800)the National Natural Science Foundation of China(Grant No.52105482).
文摘Off-axis aspherical mirrors are widely used in optical systems and precision measuring instruments,whereas off-axis aspherical mirrors with large sizes and off-axis are used in large optical systems such as astronomical telescopes and radio telescopes.However,if the off-axis amount of an off-axis aspherical mirror exceeds the capability of the machine tool,traditional rotary-turning machining methods are not applicable,and advanced computerized numerical control(CNC)machining methods,such as the slow-tool-servo method,must be im-plemented.This article proposes a non-conventional offset(NCO)fabrication method based on slow-tool-servo single-point diamond turning for machining off-axis aspherical surfaces with large off-axis amounts.This method is theoretically applicable to the machining of off-axis aspherical surfaces with any off-axis amount.NCO fab-rication is a simpler and more efficient path-planning solution for machining individual off-axis parabolic sur-faces.In addition,corresponding solutions for other types of aspherical surfaces are proposed using the NCO method.The turning depths of workpieces with different off-axis amounts at the same machining position are analyzed and compared.A specific measurement scheme for the NCO method is presented,and the experimental results indicate that the PV and RMS form errors are 0.658μm and 60 nm,respectively.This work demonstrates that the NCO method can effectively deal with the machining challenges of off-axis aspherical structures with large off-axis amounts.
基金supported financially by the National Natural Science Foundation of China (Grants W2433104 to V.A.P. and42225402 to J.L.)the China Postdoctoral Science Foundation(Grant 2024M753205 to V.A.P.)+4 种基金the Institute of Geology and Geophysics of the Chinese Academy of Sciences (International Fellowship for Postdoctoral Researchers, Grant 2025PD02 to V.A.P.)an association between ECOS-NORD (France)Colciencias/Icetex (Colombia)(Grant C12U01 to M.I.M.)a junior fellowship scheme of Colciencias (Colombia)(Grant 706-2015 to V.A.P.)supported the undergraduate final project of A.T
文摘The accretion of the Panama-ChocóBlock to the South American Plate partially drove the geological setting of the northern Andes.This event occurred in different collisional stages that are recorded in Oligocene-middle Miocene deformed rocks of the inter-Andean valley between the Western and Central Cordilleras of Colombia.However,uncertainty remains about the age of the latest accretionary phases of the Panama-ChocóBlock.Poorly studied late Miocene volcanic rocks within the northern inter-Andean valley may provide key information to constrain the temporality of that final collision.Here,we study the deformational features of the~12-6 Ma extrusive rocks of the Combia Volcanic Province located in the northwestern Andes(Colombia).We present anisotropy of magnetic susceptibility(AMS)data for pyroclastic and volcanic rocks within the AmagáBasin,an inter-Andean depression with Oligocene-middle Miocene sedimentary rocks that recorded NW-SE compression and NE-SW simple shear caused by the Panama-ChocóBlock collision.We identified that the magnetic fabrics of the extrusive rocks of the Combia Volcanic Province reveal flow directions that indicate the occurrence of ancient volcanoes in the central axis of the AmagáBasin.Some of these fabrics do not contain any deformational features,whereas others record the same structural regime as the Oligocene-middle Miocene sedimentary rocks.We infer that variations in the intensity of the deformation promoted late Miocene local fault reactivations that,in contrast to the Oligocene-middle Miocene deformational events,did not affect the entire AmagáBasin.Age differences among the studied sections can also explain the different deformational patterns identified in the basin.Both interpretations suggest that the most significant collisional events of the Panama-ChocóBlock occurred in the Oligocene-middle Miocene,whereas the formation of the Combia Volcanic Province may have either followed or coincided with the latest stages of the accretion.
基金The Special Project of the Ministry of Construction ofChina (No.20060909).
文摘In order to establish the relationship between the measured dynamic response and the health status of long-span bridges, a double-layer model updating method for steel-concrete composite beam cable-stayed bridges is proposed. Measured frequencies are selected as the first-layer reference data, and the mass of the bridge deck, the grid density, the modulus of concrete and the ballast on the side span are modified by using a manual tuning technique. Measured global positioning system （GPS） data is selected as the second-layer reference data, and the degradation of the integral structure stiffness EI of the whole bridge is taken into account for the second-layer model updating by using the finite element iteration algorithm. The Nanpu Bridge in Shanghai is taken as a case to verify the applicability of the proposed model updating method. After the first-layer model updating, the standard deviation of modal frequencies is smaller than 7%. After the second-layer model updating, the error of the deflection of the mid-span is smaller than 10%. The integral structure stiffness of the whole bridge decreases about 20%. The research results show a good agreement between the calculated response and the measured response.
文摘In order to increase the fatigue life (FL) of road wheels (RW), a kind of double layer rubber flange (DLRF) is put forward. It consists of two layers of rubber, where metal wires are laid in the inner layer and the outer layer has no inlaid metal wires. Stress, strain and temperature field of DLRF were calculated with ANSYS finite element analysis (FEA) software, FL of DLRF RW was also computed with fracture mechanics fatigue theory. The results of computation indicate that the heat generated in RW's rubber flange (RF) can be reduced by the use of DLRF, and the FL of RW can be increased without affecting the mechanical intensity of RW.
文摘The aim of the study was to develop actarit double-layered osmotic pump tablets to overcome the weak points of actarit common tablets, such as short half-life and large plasma concentration fluctuations. Single factor experiment and orthogonal test were applied to optimize the formulation;the pharmacokinetic study was performed in beagle dogs adopting actarit common tablets as reference tablets. The optimal formulation was as follows: drug layer: 150 mg actarit, 240 mg PEO-N80, 50 mg NaCl;push layer: 140 mg PEO-WSR303, 20 mg NaCl;coating solution: 30 g cellulose acetate and 6 g PEG 4000 in 1000 ml 94% acetone solution, 60 mg coating weight gain. The pharmacokinetic study showed that T max was prolonged by the contrast of commercial common tablets with constant drug release rate, but the bioavailability was equivalent. And a good in vivo –in vitro correlation of the actarit osmotic pump tablets was also established. The designed actarit osmotic pump tablets can be applied for rheumatoid arthritis, proposing a promising replacement for the marked common products.
文摘AIM To investigate the efficacy of double-layered covered stent in the treatment of malignant oesophageal obstructions.METHODS A systematic review and meta-analysis was performed following the PRISMA process. Pub Med(Medline),EMBASE(Excerpta Medical Database),AMED(Allied and Complementary medicine Database),Scopus and online content,were searched for studies reporting on the Ni Ti-S polyurethane-covered double oesophageal stent for the treatment of malignant dysphagia. Weighted pooled outcomes were synthesized with a random effects model to account for clinical heterogeneity. All studies reporting the outcome of palliative management of dysphagia due to histologically confirmed malignant oesophageal obstruction using double-layered covered nitinol stent were included. The level of statistical significance was set at α = 0.05.RESULTS Six clinical studies comprising 250 patients in total were identified. Pooled technical success of stent insertion was 97.2%(95%CI: 94.8%-98.9%; I2 = 5.8%). Pooled complication rate was 27.6%(95%CI: 20.7%-35.2%; I2 = 41.9%). Weighted improvement of dysphagia on a scale of 0-5 scoring system was-2.00 [95%CI:-2.29%-(-1.72%); I2 = 87%]. Distal stent migration was documented in 10 out of the 250 cases examined.Pooled stent migration rate was 4.7%(95%CI: 2.5%-7.7%; I2 = 0%). Finally,tumour overgrowth was reported in 34 out of the 250 cases with pooled rate of tumour overgrowth of 11.2%(95%CI: 3.7%-22.1%; I2 = 82.2%). No funnel plot asymmetry to suggest publication bias(bias = 0.39,P = 0.78). In the sensitivity analysis all results were largely similar between the fixed and random effects models.CONCLUSION The double-layered nitinol stent provides immediate relief of malignant dysphagia with low rates of stent migration and tumour
基金Projects(50878191,51109092)supported by the National Natural Science Foundation of China
文摘Based on non-Darcian flow law described by exponent and threshold gradient within a double-layered soil, the classic theory of one-dimensional consolidation of double-layered soil was modified to consider the change of vertical total stress with depth and time together. Because of the complexity of governing equations, the numerical solutions were obtained in detail by finite difference method. Then, the numerical solutions were compared with the analytical solutions in condition that non-Darcian flow law was degenerated to Dary's law, and the comparison results show that numerical solutions are reliable. Finally, consolidation behavior of double-layered soil with different parameters was analyzed, and the results show that the consolidation rate of double-layered soil decreases with increasing the value of exponent and threshold of non-Darcian flow, and the exponent and threshold gradient of the first soil layer greatly influence the consolidation rate of double-layered soil. The larger the ratio of the equivalent water head of external load to the total thickness of double-layered soil, the larger the rate of the consolidation, and the similitude relationship in classical consolidation theory of double-layered soil is not satisfied. The other consolidation behavior of double-layered soil with non-Darcian flow is the same as that with Darcy's law.
文摘The velocity structures of flow through vertically double-layered vegetation(VDLV)as well as single-layered rigid vegetation(SLV)were investigated computationally with a three-dimensional(3D)Reynolds stress turbulence model,using the computational fluid dynamics(CFD)code FLUENT.The detailed velocity distribution was explored with a varying initial Froude number(Fr),with consideration of the steady subcritical flow conditions of an inland tsunami.In VDLV flows,the numerical model successfully captured the inflection point in the profiles of mean streamwise velocities in the mixing-layer region around the top of short submerged vegetation.An upward and downward movement of flow occurred at the positions located just behind the tall and short vegetation,respectively.Overall,higher streamwise velocities were observed in the upper vegetation layer due to high porosity,with Pr=98%(sparse vegetation,where Pr is the porosity),as compared to those in the lower vegetation layer,which had comparatively low porosity,with Pr=91%(dense vegetation).A rising trend of velocities was found as the flow passed through the vegetation region,followed by a clear sawtooth distribution,as compared to the regions just upstream and downstream of vegetation where the flow was almost uniform.In VDLV flows,a rising trend in the flow resistance was observed with the increase in the initial Froude number,i.e.,Fr?0.67,0.70,and 0.73.However,the flow resistance in the case of SLV was relatively very low.The numerical results also show the flow structures within the vicinity of short and tall vegetation,which are difficult to attain through experimental measurements.
基金Project(51578511)supported by the National Natural Science Foundation of China。
文摘To further investigate the one-dimensional(1D)rheological consolidation mechanism of double-layered soil,the fractional derivative Merchant model(FDMM)and the non-Darcian flow model with the non-Newtonian index are respectively introduced to describe the deformation of viscoelastic soil and the flow of pore water in the process of consolidation.Accordingly,an 1D rheological consolidation equation of double-layered soil is obtained,and its numerical analysis is performed by the implicit finite difference method.In order to verify its validity,the numerical solutions by the present method for some simplified cases are compared with the results in the related literature.Then,the influence of the revelent parameters on the rheological consolidation of double-layered soil are investigated.Numerical results indicate that the parameters of non-Darcian flow and FDMM of the first soil layer greatly influence the consolidation rate of double-layered soil.As the decrease of relative compressibility or the increase of relative permeability between the lower soil and the upper soil,the dissipation rate of excess pore water pressure and the settlement rate of the ground will be accelerated.Increasing the relative thickness of soil layer with high permeability or low compressibility will also accelerate the consolidation rate of double-layered soil.
基金National Natural Science Foundation of China(60532030)
文摘As an important scheme of future global mobile satellite communication systems to provide multimedia service, a Double-Layer Satellite Network （DLSN） with MEO satellites and LEO satellites is proposed. The Inter-Orbit-Links （IOLs） between layers is an essential factor, which affects the performances of the DLSN systems. Considering certain constellation parameters, the geometric characteristics of IOLs are described and the connectivity of MEO satellites and LEO satellites in the DLSN is analyzed. By computer simulation, the results show that IOLs should be selectively established according to certain parameters rather than the simple in-sight principle.
基金supported by the State Key Program of National Natural Science Foundation of China(Grant No.12132003)State Key Laboratory of Explosion Science and Technology(Grant No.QNKT20-07)。
文摘The time-sequenced damage behavior of the reactive projectile impacting double-layer plates is discussed.The analytical model considering the combined effect of kinetic and chemical energy is developed to reveal the damage mechanism.The influences of impact velocity and reactive projectile chemical characteristics on the damage effect are decoupled analyzed based on this model.These analyses indicate that the high energy releasing efficiency and fast reaction propagation velocity of the reactive projectile are conducive to enhancing the damage effect.The experiments with various reactive projectiles impact velocity increasing from 702 to 1385 m/s were conducted to verify this model.The experimental results presented that,the damage hole radius of the rear-plate increases with the increase of impact velocity.At the impact velocity of 1350 m/s,the radius of damage hole formed by PTFE/Al/Bi_(2)O_(3),PTFE/Al/MoO_(3),PTFE/Al/Fe_(2)O_(3)projectile on the rear-plate become smaller in sequence.These results are consistent with the analytical model prediction,demonstrating that this model can predict the damage effect quantitatively.This work is of constructive significance to the application of reactive projectiles.
基金funded by the China Postdoctoral Science Foundation(Grant No.2022M721614)the opening project of State Key Laboratory of Explosion Science and Technology,Beijing Institute of Technology(Grant No.KFJJ23-07M)。
文摘This paper proposes a type of double-layer charge liner fabricated using chemical vapor deposition(CVD)that has tungsten as its inner liner.The feasibility of this design was evaluated through penetration tests.Double-layer charge liners were fabricated by using CVD to deposit tungsten layers on the inner surfaces of pure T2 copper liners.The microstructures of the tungsten layers were analyzed using a scanning electron microscope(SEM).The feasibility analysis was carried out by pulsed X-rays,slug-retrieval test and static penetration tests.The shaped charge jet forming and penetration law of inner tungsten-coated double-layer liner were studied by numerical simulation method.The results showed that the double-layer liners could form well-shaped jets.The errors between the X-ray test results and the numerical results were within 11.07%.A slug-retrieval test was found that the retrieved slug was similar to a numerically simulated slug.Compared with the traditional pure copper shaped charge jet,the penetration depth of the double-layer shaped charge liner increased by 11.4% and>10.8% respectively.In summary,the test results are good,and the numerical simulation is in good agreement with the test,which verified the feasibility of using the CVD method to fabricate double-layer charge liners with a high-density and high-strength refractory metal as the inner liner.
文摘A simple, precise and accurate method was developed and validated for the determination of allicin release from alliin/alliinase double-layer tablets. According to Appendix XC Ⅱ of Chinese Pharmacopoeia 2010 edition Volume II, a small glass-method was adopted at the rotational speed of 100 r/min using 100 mL phosphate buffer （pH 6.8） as release medium. The release amount was determined by HPLC with a C18 column （250 mm × 4.6 mm, 5 μm） using the mobile phase consisting of methanol -0.4% carboxylic acid （65：35） at a flow rate of 1 mL/min and UV detection at 242 nm. The current method demonstrates good linearity over the range 4.052- 405.2 μg/mL （r2=0.9999） with an average recovery of 105.5%（RSD= 1.25%）. The accumulative release of alliin/alliinase double-layer tablets had good homogeneity for withinand betweenbatches. The method established is simple, accurate and repeatable for the determination of allicin release from alliin/alliinase double-layer tablets.
