Silicon is believed to be a critical anode material for approaching the roadmap of lithium-ion batteries due to its high specific capacity. But this aim has been hindered by the quick capacity fading of its electrodes...Silicon is believed to be a critical anode material for approaching the roadmap of lithium-ion batteries due to its high specific capacity. But this aim has been hindered by the quick capacity fading of its electrodes during repeated charge–discharge cycles. In this work, a “soft-hard”double-layer coating has been proposed and carried out on ball-milled silicon particles. It is composed of inside conductive pathway and outside elastic coating, which is achieved by decomposing a conductive graphite layer on the silicon surface and further coating it with a polymer layer.The incorporation of the second elastic coating on the inside carbon coating enables silicon particles strongly interacted with binders, thereby making the electrodes displaying an obviously improved cycling stability. As-obtained double-coated silicon anodes deliver a reversible capacity of 2280 m Ah g^(-1)at the voltage of 0.05–2 V, and maintains over 1763 mAh g^(-1)after 50 cycles. The double-layer coating does not crack after the repeated cycling, critical for the robust performance of the electrodes. In addition, as-obtained silicon particles are mixed with commercial graphite to make actual anodes for lithium-ion batteries. A capacity of 714 mAh g^(-1)has been achieved based on the total mass of the electrodes containing 10 wt.% double-coated silicon particles. Compared with traditional carbon coating or polymeric coating, the double-coating electrodes display a much better performance. Therefore, the double-coating strategy can give inspiration for better design and synthesis of silicon anodes, as well as other battery materials.展开更多
In this paper, the droplet transfer behavior of the stainless steel coated electrode with double layer coating is researched by means of those experimental methods, such as high speed camera, collecting droplet in wa...In this paper, the droplet transfer behavior of the stainless steel coated electrode with double layer coating is researched by means of those experimental methods, such as high speed camera, collecting droplet in water, surfacing on the steel plate et al. The results show that the droplet transfer indexes of coated electrode are mainly controlled by the size of droplet, which affects the transfer behavior of droplet. The distribution characteristic of the droplet size of the electrode affects the numerical relationship among droplet transfer indexes. The metallurgical process of the coated electrode with double layer coating is carried out continuously in different zones. The main reason for the coated electrode with double layer coating gaining excellent usability quality is that the droplets realize the 'quasi flux wall guided transfer pattern'.展开更多
In this study, CrN/Cr2O3 double-layered coatings with various thickness ratios of CrN vs Cr2O3 layer were prepared by arc ion plating technology. The influences of the thickness ratio of CrN vs Cr2O3 layer on the micr...In this study, CrN/Cr2O3 double-layered coatings with various thickness ratios of CrN vs Cr2O3 layer were prepared by arc ion plating technology. The influences of the thickness ratio of CrN vs Cr2O3 layer on the microstructural characteristics as well as the mechanical and tribological properties of the CrN/Cr2O3 doublelayered coatings were investigated. The corresponding mechanisms were also discussed. The results indicated that the insertion of CrN layer between the Cr2O3 layer and substrate can effectively decrease the internal stress level of the coating. With increasing the thickness ratio of CrN vs Cr2O3 layer, the surface roughness of double-layered coatings decreased gradually, which had a certain influence on the friction coefficient. In addition, the microhardness also declined gradually, the adhesive strength almost increased linearly, whereas the wear rate declined firstly and then increased slightly. As the thickness ratio was 2：1, the double-layered coating exhibited the best wear resistance.展开更多
Given the alarmingly increasing rates of glaucoma worldwide and the lack of satisfactory treatments,there is a dire need to explore more feasible treatment options.Magnesium(Mg)is an essential element in maintaining t...Given the alarmingly increasing rates of glaucoma worldwide and the lack of satisfactory treatments,there is a dire need to explore more feasible treatment options.Magnesium(Mg)is an essential element in maintaining the functional and structural integrity of vital ocular tissues,but Mg and its alloys are rarely mentioned in ophthalmic applications.Our previous research found that hydroxyapatite-coated Mg(Mg@HA)shows the best biocompatibility and bioactivity,and exhibits the effect of inhibiting fibrosis after filtration surgery in the rabbit model,which is expected to be a promising material for glaucoma drainage device.In this study,we further demonstrated the anti-fibrosis effect of Mg@HA from the molecular signal level and the efficacy of implantation in the rabbit filtration surgery model.In vitro experiments showed the surface modification of Mg affects the adhesion behavior and the reorganization of cytoskeleton of Human Western blot analysis and immunofluorescence found that Mg@HA regulates the adhesion and motility of human Tenon’s capsule fibroblasts mainly by down-regulating the phosphorylation of Smad2 and Smad3 in the canonical transforming growth factor-beta(TGF-β)signaling pathway.By observing and recording the condition of filtering blebs and intraocular pressure after surgery,the effectiveness of Mg@HA applied in the rabbit filtration surgery model was further evaluated.In conclusion,the application of hydroxyapatite-coated Mg in the eye has good biocompatibility and has the potential to resist postoperative glaucoma filtration fibrosis,which may be mediated by the regulation of the TGFβ/Smad signaling pathway.展开更多
Passive daytime radiative cooling is achieved by radiating heat into outer space through electromagnetic waves without energy consumption. A scalable double-layer coating with a mixture of TiO_(2), SiO_(2), and Si_(3)...Passive daytime radiative cooling is achieved by radiating heat into outer space through electromagnetic waves without energy consumption. A scalable double-layer coating with a mixture of TiO_(2), SiO_(2), and Si_(3)N_(4)micron particles for radiative cooling is proposed in this study. The finite-difference time-domain algorithm is used to analyze the influence of particle size and coating thickness on radiative cooling performance. The results of the simulation show that the particle size of 3 μm can give the best cooling performance, and the coating thickness should be above 25 μm for SiO_(2)coating. Meanwhile, the mixture of SiO_(2)and Si_(3)N_(4)significantly improves the overall emissivity. Through sample preparation and characterization,the mixture coating with a 1:1 ratio addition on an Al substrate exhibits high reflectivity with a value of 87.6% in the solar spectrum, and an average emissivity of 92% in the infrared region(2.5 μm–15 μm), which can be attributed to the synergy among the optical properties of the material. Both coatings can theoretically be cooled by about 8℃ during the day and about 21℃ at nighttime with hc = 4 W·m^(-2)·K^(-1). Furthermore, even considering the significant conduction and convection exchanges, the cooling effect persists. Outdoor experimental results show that the temperature of the double-layer radiative cooling coating is always lower than the ambient temperature under direct sunlight during the day, and can be cooled by about 5℃ on average, while lower than the temperature of the aluminum film by almost 12℃.展开更多
Due to the high capacity and moderate volume expansion of silicon protoxide SiO_(x)(160%)compared with that of Si(300%),reducing silicon dioxide SiO_(2)into SiO_(x)while maintaining its special nano-morphology makes i...Due to the high capacity and moderate volume expansion of silicon protoxide SiO_(x)(160%)compared with that of Si(300%),reducing silicon dioxide SiO_(2)into SiO_(x)while maintaining its special nano-morphology makes it attractive as an anode of Li-ion batteries.Herein,through a one-pot facile high-temperature annealing route,using SBA15 as the silicon source,and embedding tin dioxide SnO_(2)particles into carbon coated SiO_(x),the mesoporous SiO_(x)-SnO_(2)@C rod composite was prepared and tested as the anode material.The results revealed that the SnO_(2)particles were distributed uniformly in the wall,which could further improve their volume energy densities.The coated carbon plays a role in maintaining structural integrality during lithiation,and the rich mesopores structure can release the expanded volume and enhance Li-ion transfer.At 0.1 A·g^(-1),the gravimetric and volumetric capacities of the composite were as high as 1271 mAh·g^(-1)and 1573 mAh·cm^(-3),respectively.After 200 cycles,the 95%capacity could be retained compared with that upon the 2nd cycle at 0.5 A·g^(-1).And the rod morphology was well kept,except that the diameter of the rod was 3 times larger than its original size after the cell was discharged into 0.01 V.展开更多
Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigati...Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigating M_(2)N_(2)(M=Nb,Ta)with DLHC structure using first-principles calculations.Our results show that M_(2)N_(2)are stable and metallic,exhibiting superconducting behavior.Specifically,Nb_(2)N_(2)and Ta_(2)N_(2)display superconducting transition temperatures of 6.8 K and 8.8 K,respectively.Their electron-phonon coupling is predominantly driven by the coupling between metal d-orbitals and low-frequency metal-dominated vibration modes.Interestingly,two compounds also exhibit non-trivial band topology.Thus,M_(2)N_(2)are promising platforms for studying the interplay between topology and superconductivity and fill the gap in superconductivity research for DLHC materials.展开更多
Purpose–This research aims to investigate how the adhesion performance of GFRP composite components,commonly used in railway vehicles,is affected when bonded to cataphoresis coated steel substrate surfaces.Design/met...Purpose–This research aims to investigate how the adhesion performance of GFRP composite components,commonly used in railway vehicles,is affected when bonded to cataphoresis coated steel substrate surfaces.Design/methodology/approach–In this context,the aim was to determine the optimal adhesion parameters for bonding GFRP samples with natural and primed surfaces to steel samples with cataphoresis coatings.Then,single-lap joint samples with different bond thicknesses of 1 mm,2 mm and 3 mm were prepared.Finally,tensile tests were performed on the samples.Findings–The results showed that GFRP specimens with natural surfaces,characterised by the highest surface roughness,exhibited the lowest bond strength.But,the highest bonding performance was achieved in specimens where primed GFRP was bonded to cataphoresis coated steel,especially with a bond thickness of 1 mm,and achieving a yield strength of 20 MPa.This situation explains the characteristic difference between surface roughness and chemical coating,which are two essential pre-treatments in adhesive bonding.While surface roughness provides mechanical interlocking,excessive roughness can hinder the adhesive’s wetting ability,causing it to remain suspended on the surface as described in the Cassie–Baxter theorem.In contrast,it has been observed that,despite low surface roughness,chemical coatings enhance the bonding between primer paint and adhesive molecules,and–as stated in the Wenzel theorem–improve the surface wettability.Originality/value–As a preliminary preparation in the adhesive method,primer paint is applied to steel surfaces and GFRP material surfaces in classical industrial applications.In this research,the application of the catapheresis process to the steel substrate instead of primer paint and the bonding of primer-painted GFRP materials to this surface make a unique contribution to the research.展开更多
This paper presents a biosensor utilizing a whispering gallery mode(WGM)resonator characterized by azimuthal symmetry and crescent-shaped coatings of silver.The study investigates the impact of the coupling gap on the...This paper presents a biosensor utilizing a whispering gallery mode(WGM)resonator characterized by azimuthal symmetry and crescent-shaped coatings of silver.The study investigates the impact of the coupling gap on the extinction ratio and Q-factor of the setup.The resonator is coated with silver in crescent shapes,ranging from 40 nm to 65 nm in thickness.Coupling is achieved with a silica waveguide,simulating the tapered fiber coupling method.Notably,the resonator exhibits a maximum sensitivity of 220 nm/RIU when coated with 55-nm-thick silver in conjunction with a 4-nm-thick layer of thiol-tethered deoxyribonucleic acid(DNA).This biosensor holds promise for biomolecule detection applications.展开更多
The possible application of magnesium(Mg)in glaucoma surgical treatment has been investigated in our previous work.In this paper,the degradation behavior and biocompatibility of Mg coated with hydroxyapatite(HA)and di...The possible application of magnesium(Mg)in glaucoma surgical treatment has been investigated in our previous work.In this paper,the degradation behavior and biocompatibility of Mg coated with hydroxyapatite(HA)and dicalcium phosphate dihydrate(DCPD)in eye environment were evaluated,and uncoated Mg was used for comparison.It was found that uniform corrosion occurred macroscopically to the coated Mg samples in sodium lactate ringer’s injection(SLRI)as well as in the rabbit eyes.In micro-scale,the corrosion was characterized by local cracking and pitting primarily.Mg and calcium(Ca)were incorporated into the surface corrosion products and a multi-layer structure was formed.Compared to other samples,HA-coated Mg slowed down dramatically the alkalinity of the solution and the ion release of the sample,and exhibited the lowest corrosion rate in SLRI,which was about 0.22 mm/a.In terms of biocompatibility,fibroblasts demonstrated high viability in the HA-coated and DCPD-coated Mg groups(p<0.05)in vitro.In vivo,HA-coated Mg was found to show lower inflammatory response and fibrosis than the other groups did,as indicated by hematoxylin-eosin and immunofluorescence staining.During the degrading process of HA-coated Mg in the rabbits’eyes,no inflammation was found in the anterior chamber,lens,and vitreous body.HA-coated Mg was fully biodegraded fifteen weeks post-operation,and the scleral drainage channel(SDC)was formed without obvious scarring.It is concluded that HA-coated Mg implantation is a promising adjunctive procedure to improve the success rate of trabeculectomy.Statement of significance:Magnesium(Mg)has shown to be a potential biomaterial for ophthalmic implants in our previous work.However,inflammatory response resulted from the low corrosion resistance of Mg is a major concern.It is shown here that Mg coated with different calcium phosphates can improve these properties in varying degrees and keep the scleral drainage channel unobstructed and unscarred.Based on our in vitro and in vivo studies,HA-coated Mg exhibited a better degradation behavior and excellent biocompatibility.The scleral drainage channel still exists and aqueous humor flows out smoothly after the full degradation of the implant.It is concluded that HA-coated Mg is a promising biomaterial to increase the therapeutic efficiency of trabeculectomy for glaucoma.展开更多
Black nickel coatings have emerged as a research hotspot in materials science due to their excellent performance and broad application prospects.In this study,nickel-based black coatings were fabricated on low-carbon ...Black nickel coatings have emerged as a research hotspot in materials science due to their excellent performance and broad application prospects.In this study,nickel-based black coatings were fabricated on low-carbon steel substrates via photo-assisted electrodeposition.A systematic investigation was conducted on the effects of cerium ion concentration and nano-ceria(CeO_(2))particle content in the electrolyte on the coating properties,along with an analysis of the temporal evolution of coating’s corrosion resistance.When the cerium ion concentration in the electrolyte was 0.05 mol/L,the coating exhibited a uniform black appearance with a light absorption rate of 95%,an emissivity of 0.87,maximum impedance,and the lowest corrosion tendency,demonstrating optimal comprehensive performance.The coating prepared with a nano-ceria concentration of 6 g/L in the electrolyte exhibited an emissivity of 0.9,achieved a 5B adhesion grade(ASTM D3359-09),and demonstrated a one-order-of-magnitude reduction in corrosion current density compared to coatings fabricated without nano-ceria in the electrolyte.With prolonged storage time,the coating's impedance slightly increased,leading to improved corrosion resistance.展开更多
The as-deposited coating-substrate microstructure has been identified to substantially influence the high-cycle fatigue(HCF)behavior of Ni-based single-crystal(SX)superalloys at 900℃,but the impact of degraded micros...The as-deposited coating-substrate microstructure has been identified to substantially influence the high-cycle fatigue(HCF)behavior of Ni-based single-crystal(SX)superalloys at 900℃,but the impact of degraded microstructure on the HCF behavior remains unclear.In this work,a PtAl-coated third-generation SX superalloy with sheet specimen was thermal-exposed at 1100℃ with different durations and then subjected to HCF tests at 900℃.The influence of microstructural degradation on the HCF life and crack initiation were clarified by analyzing the development of microcracks and coating-substrate microstructure.Notably,the HCF life of the thermal-exposed coated alloy increased abnormally,which was attributed to the transformation of the fatigue crack initiation site from surface mi-crocracks to internal micropores compared to the as-deposited coated alloy.Although the nucleation and growth of surface microcracks occurred along the grain boundaries in the coating and the interdiffusion zone(IDZ)for both the as-deposited and the thermal-exposed coated alloys,remarkable differences of the microcrack growth into the substrate adjacent to the IDZ were observed,changing the crack initiation site.Specifically,the surface microcracks grew into the substrate through the cracking of the non-protective oxide layers in the as-deposited coated alloy.In comparison,the hinderance of the surface microcracks growth was found in the thermal-exposed coated al-loy,due to the formation of a protective Al_(2)O_(3) layer within the microcrack and theγ′rafting in the substrate close to the IDZ.This study will aid in improving the HCF life prediction model for the coated SX superalloys.展开更多
In this paper,polyamide(PA)woven fabric was used as the base fabric,and polyurethane(PU)solution containing silica nanoparticles(PU@SiO_(2)NPs)was used as the coating solution to prepare composite tent fabric(PA/PU@Si...In this paper,polyamide(PA)woven fabric was used as the base fabric,and polyurethane(PU)solution containing silica nanoparticles(PU@SiO_(2)NPs)was used as the coating solution to prepare composite tent fabric(PA/PU@SiO_(2)).The morphology,structure,and durability of the tent fabric under ultraviolet(UV)radiation,waterstained,or thermal conditions were investigated.The results show that compared with PA/PU fabric without SiO_(2)NPs,when the mass fraction of SiO_(2)NPs in PU coating is 5%,the air permeability of PA/PU@SiO_(2)fabric decreases from about 7.5 to 6.0 nm/s,while the reflectivity to UVvisible light is significantly improved.The surface wettability decreases,as indicated by the average water contact angle(WCA)on PA/PU@SiO_(2)remaining stable at 47°after 9 min.After thermal treatment,the PA/PU@SiO_(2)fabric shows superior mechanical stability.The degradation rate of the tensile strength is only 6.3%,approximately half that of the PA/PU fabric.Meanwhile,the elongation at break increases to 98.9%,compared to 61.8%for the PA/PU fabric.展开更多
In the anticorrosive coating line of a welded tube plant, the current status and existing problems of the medium-frequency induction heating equipment were discussed.Partial renovations of the power control cabinet ha...In the anticorrosive coating line of a welded tube plant, the current status and existing problems of the medium-frequency induction heating equipment were discussed.Partial renovations of the power control cabinet have been conducted.Parameters such as the DC current, DC voltage, intermediate frequency power, heating temperature, and the positioning signal at the pipe end were collected.A data acquisition and processing system, which can process data according to user needs and provide convenient data processing functions, has been developed using LabVIEW software.This system has been successfully applied in the coating line for the automatic control of high-power induction heating equipment, production management, and digital steel tube and/or digital delivery.展开更多
Double-wall effusion cooling coupled with thermal barrier coating(TBC)is an important way of thermal protection for gas turbine vanes and blades of next-generation aero-engine,and formation of discrete crater holes by...Double-wall effusion cooling coupled with thermal barrier coating(TBC)is an important way of thermal protection for gas turbine vanes and blades of next-generation aero-engine,and formation of discrete crater holes by TBC spraying is an approved design.To protect both metal and TBC synchronously,a recommended geometry of crater is obtained through a fully automatic multi-objective optimization combined with conjugate heat transfer simulation in this work.The length and width of crater(i.e.,L/D and W/D)were applied as design variables,and the area-averaged overall effectiveness of the metal and TBC surfaces(i.e.,Φ_(av) and τ_(av))were selected as objective functions.The optimization procedure consists of automated geometry and mesh generation,conjugate heat transfer simulation validated by experimental data and Kriging surrogated model.The results showed that the Φ_(av) and τ_(av) are successfully increased respectively by 9.1%and 6.0%through optimization.Appropriate enlargement of the width and length of the crater can significantly improve the film coverage effect,since that the beneficial anti-CRVP is enhanced and the harmful CRVP is weakened.展开更多
Addressing the limitations of current commercial GBR membranes has driven a continued commitment to optimize materials,which integrate mechanical stability,biodegradability,antibacterial,and osteogenic functionality.Z...Addressing the limitations of current commercial GBR membranes has driven a continued commitment to optimize materials,which integrate mechanical stability,biodegradability,antibacterial,and osteogenic functionality.Zinc(Zn)is recently considered to be a promising candidate material for GBR membranes,while the in vivo osteogenic performance and antibacterial activity of pure Zn are inadequate.In this study,we developed MXene-coated Zn using an in situ self-reducing/assembling strategy to optimize the degradation,and endow antibacterial activity and osteogenesis with Zn substrates.MXene coatings exhibited excellent and stable photothermal response in the second near-infrared(NIR-II)region,enabling efficient scavenging of free radicals under NIR irradiation.The uniform and dense structure of the coating effectively blocked corrosive mediators,which significantly reduced the degradation rate of Zn substrates.This also moderated Zn ion(Zn^(2+))release,improving cytocompatibility and promoting the migration of HGF-1 cells,osteogenic differentiation of MC3T3-E1 cells,and the secretion of anti-inflammatory factors.Moreover,the synergistic antibacterial effect of the MXene coating,involving photothermal activity and Zn^(2+),demonstrated over 99%antibacterial efficacy against both Escherichia coli(E.coli)and Staphylococcus aureus(S.aureus).Remarkably,in a rat subcutaneous infection model,the MXene-coated Zn eradicated nearly all bacteria at biosafe temperatures(<50℃).The coating also promoted in vivo expression of anti-inflammatory factor IL-10,creating a favorable immune microenvironment.The MXene-coated Zn membrane offers a promising strategy for simultaneously controlling Zn degradation,enhancing antibacterial activity,and promoting bone regeneration.Additionally,it shows great potential in regulating immune responses and facilitating soft tissue healing,paving the way for Zn-based materials to be applied as barrier membranes in future clinical applications.展开更多
SnO_(2)is regarded as a promising lithium storage material due to the advantage of sequential conversion-alloying reaction mechanism.Unfortunately,large volume expansion and undesirable reaction reversibility are iden...SnO_(2)is regarded as a promising lithium storage material due to the advantage of sequential conversion-alloying reaction mechanism.Unfortunately,large volume expansion and undesirable reaction reversibility are identified as two fatal drawbacks.Herein,SnO_(2)nanoparticles encapsulated in graphene oxide-coated porous biochar skeleton(SnO_(2)/PB@GO)are skillfully constructed via an efficient one-step hydrothermal process to be employed as composite anode materials,in which the PB skeleton extracted from waste tea-seed shells possesses enough space to buffer drastic volume variation and the GO coating acts as robust physical matrix to prevent structural degradation.Moreover,double-carbon components successfully anchor SnO_(2)nanoparticles to promote contact and reaction between Sn and Li_(2)O to guarantee high reaction reversibility and structural integration of SnO_(2)/PB@GO electrode.As expected,SnO_(2)/PB@GO-based cell achieves high reversible specific capacity of 783.5 mAh·g^(-1)after 100 cycles at0.1 A.g^(-1)and delivers desirable cycling stability with capacity retention ratio of 81.62%after 300 cycles at1.0 A.g^(-1).Therefore,this work may provide new perspectives on the modification of conversion or alloying typeanodes for lithium-ion batteries and present a feasible strategy to take full advantage of the waste biomass.展开更多
Rechargeable aqueous Zn-ion batteries(ZIBs)have emerged as a promising new energy storage technology,characterized by their low cost,high safety,environmental friendliness,and the abundant availability of Zn resources...Rechargeable aqueous Zn-ion batteries(ZIBs)have emerged as a promising new energy storage technology,characterized by their low cost,high safety,environmental friendliness,and the abundant availability of Zn resources.However,several challenges remain with their use,such as zinc dendrite formation,corrosion,passivation,and hydrogen evolution reaction(HER)on the zinc anodesurface,leading to a short overall battery life.In this paper,a zinc anode-coating method with silica-fly ash composite(FAS)has been developed.This modified Zn anode(5FAS@Zn)demonstrates remarkable improvements in the performance and stability of ZIBs by effectively decreasing zinc nucleation overpotential and minimizing charge transfer resistance while facilitating stable Zn plating and stripping as well as achieving even zinc deposition.The remarkable cycling lifespan of the 5FAS@Znll5FAS@Zn symmetrical cell is 1800 h at 0.5 mA cm^(-2)and 1500 h at1 mA cm^(-2).The 5FAS@ZnllCu half-cell outperforms pure Zn batteries with a high and consistent Coulombic efficiency(CE)of 99.8%over 800 cycles at 1 mA cm^(-2).Furthermore,the full cell of 5FAS@ZnllV_(2)O_(5)exhibits notable improvements in cycling performance.This research provides a scalable and sustainable method to extend the life of zinc anodes and has significant implications for the large-scale deployment of zinc-ion batteries.展开更多
To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretre...To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.展开更多
Iread with great interest the recent article by Shin,et al.[1]the authors present an important exploration into the use of drug-coated balloon(DCB)in patients aged≥75 years,a demographic increasingly encountered in m...Iread with great interest the recent article by Shin,et al.[1]the authors present an important exploration into the use of drug-coated balloon(DCB)in patients aged≥75 years,a demographic increasingly encountered in modern cardiovascular practice.The authors conducted a retrospective analysis involving 2050 elderly patients(aged≥75 years)undergoing successful percutaneous coronary intervention(PCI).展开更多
基金supported by the National Natural Science Foundation of China (No. 22008256)。
文摘Silicon is believed to be a critical anode material for approaching the roadmap of lithium-ion batteries due to its high specific capacity. But this aim has been hindered by the quick capacity fading of its electrodes during repeated charge–discharge cycles. In this work, a “soft-hard”double-layer coating has been proposed and carried out on ball-milled silicon particles. It is composed of inside conductive pathway and outside elastic coating, which is achieved by decomposing a conductive graphite layer on the silicon surface and further coating it with a polymer layer.The incorporation of the second elastic coating on the inside carbon coating enables silicon particles strongly interacted with binders, thereby making the electrodes displaying an obviously improved cycling stability. As-obtained double-coated silicon anodes deliver a reversible capacity of 2280 m Ah g^(-1)at the voltage of 0.05–2 V, and maintains over 1763 mAh g^(-1)after 50 cycles. The double-layer coating does not crack after the repeated cycling, critical for the robust performance of the electrodes. In addition, as-obtained silicon particles are mixed with commercial graphite to make actual anodes for lithium-ion batteries. A capacity of 714 mAh g^(-1)has been achieved based on the total mass of the electrodes containing 10 wt.% double-coated silicon particles. Compared with traditional carbon coating or polymeric coating, the double-coating electrodes display a much better performance. Therefore, the double-coating strategy can give inspiration for better design and synthesis of silicon anodes, as well as other battery materials.
文摘In this paper, the droplet transfer behavior of the stainless steel coated electrode with double layer coating is researched by means of those experimental methods, such as high speed camera, collecting droplet in water, surfacing on the steel plate et al. The results show that the droplet transfer indexes of coated electrode are mainly controlled by the size of droplet, which affects the transfer behavior of droplet. The distribution characteristic of the droplet size of the electrode affects the numerical relationship among droplet transfer indexes. The metallurgical process of the coated electrode with double layer coating is carried out continuously in different zones. The main reason for the coated electrode with double layer coating gaining excellent usability quality is that the droplets realize the 'quasi flux wall guided transfer pattern'.
基金the National Key Basic Research Program of China("973 Program",No.2012CB625100)the National Natural Science Foundation of China(No.51001106&No.51301181)the Doctoral Starting up Foundation of Liaoning Province Science and Technology Agency,China(No.20131118)
文摘In this study, CrN/Cr2O3 double-layered coatings with various thickness ratios of CrN vs Cr2O3 layer were prepared by arc ion plating technology. The influences of the thickness ratio of CrN vs Cr2O3 layer on the microstructural characteristics as well as the mechanical and tribological properties of the CrN/Cr2O3 doublelayered coatings were investigated. The corresponding mechanisms were also discussed. The results indicated that the insertion of CrN layer between the Cr2O3 layer and substrate can effectively decrease the internal stress level of the coating. With increasing the thickness ratio of CrN vs Cr2O3 layer, the surface roughness of double-layered coatings decreased gradually, which had a certain influence on the friction coefficient. In addition, the microhardness also declined gradually, the adhesive strength almost increased linearly, whereas the wear rate declined firstly and then increased slightly. As the thickness ratio was 2：1, the double-layered coating exhibited the best wear resistance.
基金supported by the National Natural Science Foundation of China(Grant No.81670860 and 81700836)Natural Science Foundation of Chongqing(Grant No.cstc2018jcyjAX0034 and cstc2018jcyjAX0016).
文摘Given the alarmingly increasing rates of glaucoma worldwide and the lack of satisfactory treatments,there is a dire need to explore more feasible treatment options.Magnesium(Mg)is an essential element in maintaining the functional and structural integrity of vital ocular tissues,but Mg and its alloys are rarely mentioned in ophthalmic applications.Our previous research found that hydroxyapatite-coated Mg(Mg@HA)shows the best biocompatibility and bioactivity,and exhibits the effect of inhibiting fibrosis after filtration surgery in the rabbit model,which is expected to be a promising material for glaucoma drainage device.In this study,we further demonstrated the anti-fibrosis effect of Mg@HA from the molecular signal level and the efficacy of implantation in the rabbit filtration surgery model.In vitro experiments showed the surface modification of Mg affects the adhesion behavior and the reorganization of cytoskeleton of Human Western blot analysis and immunofluorescence found that Mg@HA regulates the adhesion and motility of human Tenon’s capsule fibroblasts mainly by down-regulating the phosphorylation of Smad2 and Smad3 in the canonical transforming growth factor-beta(TGF-β)signaling pathway.By observing and recording the condition of filtering blebs and intraocular pressure after surgery,the effectiveness of Mg@HA applied in the rabbit filtration surgery model was further evaluated.In conclusion,the application of hydroxyapatite-coated Mg in the eye has good biocompatibility and has the potential to resist postoperative glaucoma filtration fibrosis,which may be mediated by the regulation of the TGFβ/Smad signaling pathway.
文摘Passive daytime radiative cooling is achieved by radiating heat into outer space through electromagnetic waves without energy consumption. A scalable double-layer coating with a mixture of TiO_(2), SiO_(2), and Si_(3)N_(4)micron particles for radiative cooling is proposed in this study. The finite-difference time-domain algorithm is used to analyze the influence of particle size and coating thickness on radiative cooling performance. The results of the simulation show that the particle size of 3 μm can give the best cooling performance, and the coating thickness should be above 25 μm for SiO_(2)coating. Meanwhile, the mixture of SiO_(2)and Si_(3)N_(4)significantly improves the overall emissivity. Through sample preparation and characterization,the mixture coating with a 1:1 ratio addition on an Al substrate exhibits high reflectivity with a value of 87.6% in the solar spectrum, and an average emissivity of 92% in the infrared region(2.5 μm–15 μm), which can be attributed to the synergy among the optical properties of the material. Both coatings can theoretically be cooled by about 8℃ during the day and about 21℃ at nighttime with hc = 4 W·m^(-2)·K^(-1). Furthermore, even considering the significant conduction and convection exchanges, the cooling effect persists. Outdoor experimental results show that the temperature of the double-layer radiative cooling coating is always lower than the ambient temperature under direct sunlight during the day, and can be cooled by about 5℃ on average, while lower than the temperature of the aluminum film by almost 12℃.
文摘Due to the high capacity and moderate volume expansion of silicon protoxide SiO_(x)(160%)compared with that of Si(300%),reducing silicon dioxide SiO_(2)into SiO_(x)while maintaining its special nano-morphology makes it attractive as an anode of Li-ion batteries.Herein,through a one-pot facile high-temperature annealing route,using SBA15 as the silicon source,and embedding tin dioxide SnO_(2)particles into carbon coated SiO_(x),the mesoporous SiO_(x)-SnO_(2)@C rod composite was prepared and tested as the anode material.The results revealed that the SnO_(2)particles were distributed uniformly in the wall,which could further improve their volume energy densities.The coated carbon plays a role in maintaining structural integrality during lithiation,and the rich mesopores structure can release the expanded volume and enhance Li-ion transfer.At 0.1 A·g^(-1),the gravimetric and volumetric capacities of the composite were as high as 1271 mAh·g^(-1)and 1573 mAh·cm^(-3),respectively.After 200 cycles,the 95%capacity could be retained compared with that upon the 2nd cycle at 0.5 A·g^(-1).And the rod morphology was well kept,except that the diameter of the rod was 3 times larger than its original size after the cell was discharged into 0.01 V.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12074213 and 11574108)the National Key R&D Program of China(Grant No.2022YFA1403103)+2 种基金the Major Basic Program of Natural Science Foundation of Shandong Province(Grant No.ZR2021ZD01)the Natural Science Foundation of Shandong Province(Grant No.ZR2023MA082)the Project of Introduction and Cultivation for Young Innovative Talents in Colleges and Universities of Shandong Province。
文摘Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigating M_(2)N_(2)(M=Nb,Ta)with DLHC structure using first-principles calculations.Our results show that M_(2)N_(2)are stable and metallic,exhibiting superconducting behavior.Specifically,Nb_(2)N_(2)and Ta_(2)N_(2)display superconducting transition temperatures of 6.8 K and 8.8 K,respectively.Their electron-phonon coupling is predominantly driven by the coupling between metal d-orbitals and low-frequency metal-dominated vibration modes.Interestingly,two compounds also exhibit non-trivial band topology.Thus,M_(2)N_(2)are promising platforms for studying the interplay between topology and superconductivity and fill the gap in superconductivity research for DLHC materials.
文摘Purpose–This research aims to investigate how the adhesion performance of GFRP composite components,commonly used in railway vehicles,is affected when bonded to cataphoresis coated steel substrate surfaces.Design/methodology/approach–In this context,the aim was to determine the optimal adhesion parameters for bonding GFRP samples with natural and primed surfaces to steel samples with cataphoresis coatings.Then,single-lap joint samples with different bond thicknesses of 1 mm,2 mm and 3 mm were prepared.Finally,tensile tests were performed on the samples.Findings–The results showed that GFRP specimens with natural surfaces,characterised by the highest surface roughness,exhibited the lowest bond strength.But,the highest bonding performance was achieved in specimens where primed GFRP was bonded to cataphoresis coated steel,especially with a bond thickness of 1 mm,and achieving a yield strength of 20 MPa.This situation explains the characteristic difference between surface roughness and chemical coating,which are two essential pre-treatments in adhesive bonding.While surface roughness provides mechanical interlocking,excessive roughness can hinder the adhesive’s wetting ability,causing it to remain suspended on the surface as described in the Cassie–Baxter theorem.In contrast,it has been observed that,despite low surface roughness,chemical coatings enhance the bonding between primer paint and adhesive molecules,and–as stated in the Wenzel theorem–improve the surface wettability.Originality/value–As a preliminary preparation in the adhesive method,primer paint is applied to steel surfaces and GFRP material surfaces in classical industrial applications.In this research,the application of the catapheresis process to the steel substrate instead of primer paint and the bonding of primer-painted GFRP materials to this surface make a unique contribution to the research.
基金supported by the Airlangga University through Mandate Research Grant(Nos.216/UN3.15/PT/2022 and 217/UN3.15/PT/2022)。
文摘This paper presents a biosensor utilizing a whispering gallery mode(WGM)resonator characterized by azimuthal symmetry and crescent-shaped coatings of silver.The study investigates the impact of the coupling gap on the extinction ratio and Q-factor of the setup.The resonator is coated with silver in crescent shapes,ranging from 40 nm to 65 nm in thickness.Coupling is achieved with a silica waveguide,simulating the tapered fiber coupling method.Notably,the resonator exhibits a maximum sensitivity of 220 nm/RIU when coated with 55-nm-thick silver in conjunction with a 4-nm-thick layer of thiol-tethered deoxyribonucleic acid(DNA).This biosensor holds promise for biomolecule detection applications.
基金supported by the Natural Science Foundation of Chongqing(Grant No.csts2018jcyjAX0016)Funded by the Senior Medical Talents Program of Chongqing for Young and Middle-aged.
文摘The possible application of magnesium(Mg)in glaucoma surgical treatment has been investigated in our previous work.In this paper,the degradation behavior and biocompatibility of Mg coated with hydroxyapatite(HA)and dicalcium phosphate dihydrate(DCPD)in eye environment were evaluated,and uncoated Mg was used for comparison.It was found that uniform corrosion occurred macroscopically to the coated Mg samples in sodium lactate ringer’s injection(SLRI)as well as in the rabbit eyes.In micro-scale,the corrosion was characterized by local cracking and pitting primarily.Mg and calcium(Ca)were incorporated into the surface corrosion products and a multi-layer structure was formed.Compared to other samples,HA-coated Mg slowed down dramatically the alkalinity of the solution and the ion release of the sample,and exhibited the lowest corrosion rate in SLRI,which was about 0.22 mm/a.In terms of biocompatibility,fibroblasts demonstrated high viability in the HA-coated and DCPD-coated Mg groups(p<0.05)in vitro.In vivo,HA-coated Mg was found to show lower inflammatory response and fibrosis than the other groups did,as indicated by hematoxylin-eosin and immunofluorescence staining.During the degrading process of HA-coated Mg in the rabbits’eyes,no inflammation was found in the anterior chamber,lens,and vitreous body.HA-coated Mg was fully biodegraded fifteen weeks post-operation,and the scleral drainage channel(SDC)was formed without obvious scarring.It is concluded that HA-coated Mg implantation is a promising adjunctive procedure to improve the success rate of trabeculectomy.Statement of significance:Magnesium(Mg)has shown to be a potential biomaterial for ophthalmic implants in our previous work.However,inflammatory response resulted from the low corrosion resistance of Mg is a major concern.It is shown here that Mg coated with different calcium phosphates can improve these properties in varying degrees and keep the scleral drainage channel unobstructed and unscarred.Based on our in vitro and in vivo studies,HA-coated Mg exhibited a better degradation behavior and excellent biocompatibility.The scleral drainage channel still exists and aqueous humor flows out smoothly after the full degradation of the implant.It is concluded that HA-coated Mg is a promising biomaterial to increase the therapeutic efficiency of trabeculectomy for glaucoma.
文摘Black nickel coatings have emerged as a research hotspot in materials science due to their excellent performance and broad application prospects.In this study,nickel-based black coatings were fabricated on low-carbon steel substrates via photo-assisted electrodeposition.A systematic investigation was conducted on the effects of cerium ion concentration and nano-ceria(CeO_(2))particle content in the electrolyte on the coating properties,along with an analysis of the temporal evolution of coating’s corrosion resistance.When the cerium ion concentration in the electrolyte was 0.05 mol/L,the coating exhibited a uniform black appearance with a light absorption rate of 95%,an emissivity of 0.87,maximum impedance,and the lowest corrosion tendency,demonstrating optimal comprehensive performance.The coating prepared with a nano-ceria concentration of 6 g/L in the electrolyte exhibited an emissivity of 0.9,achieved a 5B adhesion grade(ASTM D3359-09),and demonstrated a one-order-of-magnitude reduction in corrosion current density compared to coatings fabricated without nano-ceria in the electrolyte.With prolonged storage time,the coating's impedance slightly increased,leading to improved corrosion resistance.
基金financially supported by National Key Research and Development Program of China(No.2022YFB 3708100)the Science Center for Gas Turbine Project,China(No.P2021-A-IV-002-001)+1 种基金the National Natural Science Foundation of China(Nos.52331005 and 52201100)the State Key Laboratory for Advanced Metals and Materials,China(No.2024-Z02).
文摘The as-deposited coating-substrate microstructure has been identified to substantially influence the high-cycle fatigue(HCF)behavior of Ni-based single-crystal(SX)superalloys at 900℃,but the impact of degraded microstructure on the HCF behavior remains unclear.In this work,a PtAl-coated third-generation SX superalloy with sheet specimen was thermal-exposed at 1100℃ with different durations and then subjected to HCF tests at 900℃.The influence of microstructural degradation on the HCF life and crack initiation were clarified by analyzing the development of microcracks and coating-substrate microstructure.Notably,the HCF life of the thermal-exposed coated alloy increased abnormally,which was attributed to the transformation of the fatigue crack initiation site from surface mi-crocracks to internal micropores compared to the as-deposited coated alloy.Although the nucleation and growth of surface microcracks occurred along the grain boundaries in the coating and the interdiffusion zone(IDZ)for both the as-deposited and the thermal-exposed coated alloys,remarkable differences of the microcrack growth into the substrate adjacent to the IDZ were observed,changing the crack initiation site.Specifically,the surface microcracks grew into the substrate through the cracking of the non-protective oxide layers in the as-deposited coated alloy.In comparison,the hinderance of the surface microcracks growth was found in the thermal-exposed coated al-loy,due to the formation of a protective Al_(2)O_(3) layer within the microcrack and theγ′rafting in the substrate close to the IDZ.This study will aid in improving the HCF life prediction model for the coated SX superalloys.
文摘In this paper,polyamide(PA)woven fabric was used as the base fabric,and polyurethane(PU)solution containing silica nanoparticles(PU@SiO_(2)NPs)was used as the coating solution to prepare composite tent fabric(PA/PU@SiO_(2)).The morphology,structure,and durability of the tent fabric under ultraviolet(UV)radiation,waterstained,or thermal conditions were investigated.The results show that compared with PA/PU fabric without SiO_(2)NPs,when the mass fraction of SiO_(2)NPs in PU coating is 5%,the air permeability of PA/PU@SiO_(2)fabric decreases from about 7.5 to 6.0 nm/s,while the reflectivity to UVvisible light is significantly improved.The surface wettability decreases,as indicated by the average water contact angle(WCA)on PA/PU@SiO_(2)remaining stable at 47°after 9 min.After thermal treatment,the PA/PU@SiO_(2)fabric shows superior mechanical stability.The degradation rate of the tensile strength is only 6.3%,approximately half that of the PA/PU fabric.Meanwhile,the elongation at break increases to 98.9%,compared to 61.8%for the PA/PU fabric.
文摘In the anticorrosive coating line of a welded tube plant, the current status and existing problems of the medium-frequency induction heating equipment were discussed.Partial renovations of the power control cabinet have been conducted.Parameters such as the DC current, DC voltage, intermediate frequency power, heating temperature, and the positioning signal at the pipe end were collected.A data acquisition and processing system, which can process data according to user needs and provide convenient data processing functions, has been developed using LabVIEW software.This system has been successfully applied in the coating line for the automatic control of high-power induction heating equipment, production management, and digital steel tube and/or digital delivery.
基金Anhui Provincial Natural Science Foundation of China(2108085ME176)the Natural Science Foundation of China(52276043)。
文摘Double-wall effusion cooling coupled with thermal barrier coating(TBC)is an important way of thermal protection for gas turbine vanes and blades of next-generation aero-engine,and formation of discrete crater holes by TBC spraying is an approved design.To protect both metal and TBC synchronously,a recommended geometry of crater is obtained through a fully automatic multi-objective optimization combined with conjugate heat transfer simulation in this work.The length and width of crater(i.e.,L/D and W/D)were applied as design variables,and the area-averaged overall effectiveness of the metal and TBC surfaces(i.e.,Φ_(av) and τ_(av))were selected as objective functions.The optimization procedure consists of automated geometry and mesh generation,conjugate heat transfer simulation validated by experimental data and Kriging surrogated model.The results showed that the Φ_(av) and τ_(av) are successfully increased respectively by 9.1%and 6.0%through optimization.Appropriate enlargement of the width and length of the crater can significantly improve the film coverage effect,since that the beneficial anti-CRVP is enhanced and the harmful CRVP is weakened.
基金supported by the National Natural Science Foundation of China(Nos.52471257,52071008,12332019,and U20A20390).
文摘Addressing the limitations of current commercial GBR membranes has driven a continued commitment to optimize materials,which integrate mechanical stability,biodegradability,antibacterial,and osteogenic functionality.Zinc(Zn)is recently considered to be a promising candidate material for GBR membranes,while the in vivo osteogenic performance and antibacterial activity of pure Zn are inadequate.In this study,we developed MXene-coated Zn using an in situ self-reducing/assembling strategy to optimize the degradation,and endow antibacterial activity and osteogenesis with Zn substrates.MXene coatings exhibited excellent and stable photothermal response in the second near-infrared(NIR-II)region,enabling efficient scavenging of free radicals under NIR irradiation.The uniform and dense structure of the coating effectively blocked corrosive mediators,which significantly reduced the degradation rate of Zn substrates.This also moderated Zn ion(Zn^(2+))release,improving cytocompatibility and promoting the migration of HGF-1 cells,osteogenic differentiation of MC3T3-E1 cells,and the secretion of anti-inflammatory factors.Moreover,the synergistic antibacterial effect of the MXene coating,involving photothermal activity and Zn^(2+),demonstrated over 99%antibacterial efficacy against both Escherichia coli(E.coli)and Staphylococcus aureus(S.aureus).Remarkably,in a rat subcutaneous infection model,the MXene-coated Zn eradicated nearly all bacteria at biosafe temperatures(<50℃).The coating also promoted in vivo expression of anti-inflammatory factor IL-10,creating a favorable immune microenvironment.The MXene-coated Zn membrane offers a promising strategy for simultaneously controlling Zn degradation,enhancing antibacterial activity,and promoting bone regeneration.Additionally,it shows great potential in regulating immune responses and facilitating soft tissue healing,paving the way for Zn-based materials to be applied as barrier membranes in future clinical applications.
基金financially supported by the National Natural Science Foundation of China(Nos.52274292 and 51874046)the Outstanding Youth Foundation of Hubei Province(No.2020CFA090)+1 种基金the Project of Scientific Research of Jingzhou(No.2023EC37)the Young Top-notch Talent Cultivation Program of Hubei Province
文摘SnO_(2)is regarded as a promising lithium storage material due to the advantage of sequential conversion-alloying reaction mechanism.Unfortunately,large volume expansion and undesirable reaction reversibility are identified as two fatal drawbacks.Herein,SnO_(2)nanoparticles encapsulated in graphene oxide-coated porous biochar skeleton(SnO_(2)/PB@GO)are skillfully constructed via an efficient one-step hydrothermal process to be employed as composite anode materials,in which the PB skeleton extracted from waste tea-seed shells possesses enough space to buffer drastic volume variation and the GO coating acts as robust physical matrix to prevent structural degradation.Moreover,double-carbon components successfully anchor SnO_(2)nanoparticles to promote contact and reaction between Sn and Li_(2)O to guarantee high reaction reversibility and structural integration of SnO_(2)/PB@GO electrode.As expected,SnO_(2)/PB@GO-based cell achieves high reversible specific capacity of 783.5 mAh·g^(-1)after 100 cycles at0.1 A.g^(-1)and delivers desirable cycling stability with capacity retention ratio of 81.62%after 300 cycles at1.0 A.g^(-1).Therefore,this work may provide new perspectives on the modification of conversion or alloying typeanodes for lithium-ion batteries and present a feasible strategy to take full advantage of the waste biomass.
基金financially supported by the Thailand Science Research and Innovation Fund Chulalongkorn Universitythe National Research Council of Thailand(No.N11A670659)the National Natural Science Foundation of China(Nos.52125405 and U22A20108)
文摘Rechargeable aqueous Zn-ion batteries(ZIBs)have emerged as a promising new energy storage technology,characterized by their low cost,high safety,environmental friendliness,and the abundant availability of Zn resources.However,several challenges remain with their use,such as zinc dendrite formation,corrosion,passivation,and hydrogen evolution reaction(HER)on the zinc anodesurface,leading to a short overall battery life.In this paper,a zinc anode-coating method with silica-fly ash composite(FAS)has been developed.This modified Zn anode(5FAS@Zn)demonstrates remarkable improvements in the performance and stability of ZIBs by effectively decreasing zinc nucleation overpotential and minimizing charge transfer resistance while facilitating stable Zn plating and stripping as well as achieving even zinc deposition.The remarkable cycling lifespan of the 5FAS@Znll5FAS@Zn symmetrical cell is 1800 h at 0.5 mA cm^(-2)and 1500 h at1 mA cm^(-2).The 5FAS@ZnllCu half-cell outperforms pure Zn batteries with a high and consistent Coulombic efficiency(CE)of 99.8%over 800 cycles at 1 mA cm^(-2).Furthermore,the full cell of 5FAS@ZnllV_(2)O_(5)exhibits notable improvements in cycling performance.This research provides a scalable and sustainable method to extend the life of zinc anodes and has significant implications for the large-scale deployment of zinc-ion batteries.
基金National Natural Science Foundation of China(52071274)Key Research and Development Projects of Shaanxi Province(2023-YBGY-442)Science and Technology Nova Project-Innovative Talent Promotion Program of Shaanxi Province(2020KJXX-062)。
文摘To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.
文摘Iread with great interest the recent article by Shin,et al.[1]the authors present an important exploration into the use of drug-coated balloon(DCB)in patients aged≥75 years,a demographic increasingly encountered in modern cardiovascular practice.The authors conducted a retrospective analysis involving 2050 elderly patients(aged≥75 years)undergoing successful percutaneous coronary intervention(PCI).
