The Longmenshan(LMS)fault zone is located at the junction of the eastern Tibetan Plateau and the Sichuan Basin and is of great significance for studying regional tectonics and earthquake hazards.Although regional velo...The Longmenshan(LMS)fault zone is located at the junction of the eastern Tibetan Plateau and the Sichuan Basin and is of great significance for studying regional tectonics and earthquake hazards.Although regional velocity models are available for the LMS fault zone,high-resolution velocity models are lacking.Therefore,a dense array of 240 short-period seismometers was deployed around the central segment of the LMS fault zone for approximately 30 days to monitor earthquakes and characterize fine structures of the fault zone.Considering the large quantity of observed seismic data,the data processing workflow consisted of deep learning-based automatic earthquake detection,phase arrival picking,and association.Compared with the earthquake catalog released by the China Earthquake Administration,many more earthquakes were detected by the dense array.Double-difference seismic tomography was adopted to determine V_(p),V_(s),and V_(p)/V_(s)models as well as earthquake locations.The checkerboard test showed that the velocity models have spatial resolutions of approximately 5 km in the horizontal directions and 2 km at depth.To the west of the Yingxiu–Beichuan Fault(YBF),the Precambrian Pengguan complex,where most of earthquakes occurred,is characterized by high velocity and low V_(p)/V_(s)values.In comparison,to the east of the YBF,the Upper Paleozoic to Jurassic sediments,where few earthquakes occurred,show low velocity and high V_(p)/V_(s)values.Our results suggest that the earthquake activity in the LMS fault zone is controlled by the strength of the rock compositions.When the high-resolution velocity models were combined with the relocated earthquakes,we were also able to delineate the fault geometry for different faults in the LMS fault zone.展开更多
Crosswell seismic tomography can be used to study the lateral variation of reservoirs, reservoir properties and the dynamic movement of fluids. In view of the instability of crosswell seismic tomography, the gradient ...Crosswell seismic tomography can be used to study the lateral variation of reservoirs, reservoir properties and the dynamic movement of fluids. In view of the instability of crosswell seismic tomography, the gradient method was improved by introducing regularization, and a gradient regularization method is presented in this paper. This method was verified by processing numerical simulation data and physical model data.展开更多
Mining operation, especially underground coal mining, always has the remarkable risks of ground control. Passive seismic velocity tomography based on simultaneous iterative reconstructive technique （SIRT） inversion ...Mining operation, especially underground coal mining, always has the remarkable risks of ground control. Passive seismic velocity tomography based on simultaneous iterative reconstructive technique （SIRT） inversion is used to deduce the stress redistribution around the longwall mining panel. The mining-induced microseismic events were recorded by mounting an array of receivers on the surface, above the active panel. After processing and filtering the seismic data, the three-dimensional tomography images of the p-wave velocity variations by SIRT passive seismic velocity tomography were provided. To display the velocity changes on coal seam level and subsequently to infer the stress redistribution, these three-dimensional tomograms into the coal seam level were sliced. In addition, the boundary element method （BEM） was used to simulate the stress redistribution. The results show that the inferred stresses from the passive seismic tomograms are conformed to numerical models and theoretical concept of the stress redistribution around the longwall panel. In velocity tomograms, the main zones of the stress redistribution arotmd the panel, including front and side abutment pressures, and gob stress are obvious and also the movement of stress zones along the face advancement is evident. Moreover, the effect of the advance rate of the face on the stress redistribution is demonstrated in tomography images. The research result proves that the SIRT passive seismic velocity tomography has an ultimate potential for monitoring the changes of stress redistribution around the longwall mining panel continuously and subsequently to improve safety of mining operations.展开更多
Accurate prediction of coal and gas outburst(CGO)hazards is paramount in gas disaster prevention and control.This paper endeavors to overcome the constraints posed by traditional prediction indexes when dealing with C...Accurate prediction of coal and gas outburst(CGO)hazards is paramount in gas disaster prevention and control.This paper endeavors to overcome the constraints posed by traditional prediction indexes when dealing with CGO incidents under low gas pressure conditions.In pursuit of this objective,we have studied and established a mechanical model of the working face under abnormal stress and the excitation energy conditions of CGO,and proposed a method for predicting the risk of CGO under abnormal stress.On site application verification shows that when a strong outburst hazard level prediction is issued,there is a high possibility of outburst disasters occurring.In one of the three locations where we predicted strong outburst hazards,a small outburst occurred,and the accuracy of the prediction was higher than the traditional drilling cuttings index S and drilling cuttings gas desorption index q.Finally,we discuss the mechanism of CGO under the action of stress anomalies.Based on the analysis of stress distribution changes and energy accumulation characteristics of coal under abnormal stress,this article believes that the increase in outburst risk caused by high stress abnormal gradient is mainly due to two reasons:(1)The high stress abnormal gradient leads to an increase in the plastic zone of the coal seam.After the working face advances,it indirectly leads to an increase in the gas expansion energy that can be released from the coal seam before reaching a new stress equilibrium.(2)Abnormal stress leads to increased peak stress of coal body in front of working face.When coal body in elastic area transforms to plastic area,its failure speed is accelerated,which induces accelerated gas desorption and aggravates the risk of outburst.展开更多
The complex Red River fault zone(RRFZ),which is situated in the southwestern region of China and separates the Indochina plate and South China blocks,has diverse seismic activities in different segments.To reveal the ...The complex Red River fault zone(RRFZ),which is situated in the southwestern region of China and separates the Indochina plate and South China blocks,has diverse seismic activities in different segments.To reveal the detailed geometric characteristics of the RRFZ at different sections and to better understand the seismogenic environment,in 2022 and 2023 we deployed 7 seismic dense linear arrays,consisting of 574 nodal stations,across the RRFZ in the northern and southern segments near the towns Midu,Gasa,Zhega,Dazhai,Xinzhai,and Taoyuan.The linear arrays,which extend from 2.4 to 12.5 km in length with station intervals ranging between 40 and140 m,recorded seismic ambient noise for approximately one month.Using the extended range phase shift method,we extract the phase velocity dispersion curves of the Rayleigh waves between 0.9 and 10 Hz,which are then used to invert for the high resolution shearwave velocity structures across the RRFZ beneath the linear arrays.The key findings are:(1)the 7 imaged sections of the RRFZ exhibit quite similar structures,with higher velocities on the SW side and lower velocities on the NE side;the velocity variation is consistent with the surface geological structures along the RRFZ;(2)the shear-wave velocities on the SW side of the RRFZ at the northern Midu section and southern Gasa-Dazhai sections are generally higher than their counterparts in the southern Xinzhai-Taoyuan sections,which reflects lithological variations from the marble-dominated Paleoproterozoic Along basement to the gneiss dominated Paleoproterozoic Qingshuihe basement;(3)from the northern Midu section to the southern region where the RRFZ intersects with the Xiaojiang Fault,the major faults of the RRFZ exhibit a consistent high-angle,NE-dipping structure;(4)the low shear-wave velocities immediately to the NE of the velocity boundary may indicate a faulted zone due to long-term shearing,where excessive amplifications of ground motions could occur.This study provides new insights into the characteristics of the shallow structures of the RRFZ.展开更多
Local and global optimization methods are widely used in geophysical inversion but each has its own advantages and disadvantages. The combination of the two methods will make it possible to overcome their weaknesses. ...Local and global optimization methods are widely used in geophysical inversion but each has its own advantages and disadvantages. The combination of the two methods will make it possible to overcome their weaknesses. Based on the simulated annealing genetic algorithm （SAGA） and the simplex algorithm, an efficient and robust 2-D nonlinear method for seismic travel-time inversion is presented in this paper. First we do a global search over a large range by SAGA and then do a rapid local search using the simplex method. A multi-scale tomography method is adopted in order to reduce non-uniqueness. The velocity field is divided into different spatial scales and velocities at the grid nodes are taken as unknown parameters. The model is parameterized by a bi-cubic spline function. The finite-difference method is used to solve the forward problem while the hybrid method combining multi-scale SAGA and simplex algorithms is applied to the inverse problem. The algorithm has been applied to a numerical test and a travel-time perturbation test using an anomalous low-velocity body. For a practical example, it is used in the study of upper crustal velocity structure of the A＇nyemaqen suture zone at the north-east edge of the Qinghai-Tibet Plateau. The model test and practical application both prove that the method is effective and robust.展开更多
基金supported by the Scientific Research Foundation for High-level Talents of Anhui University of Science and Technology under Grant 2024yjrc64the National Key R&D Program of China under Grant 2018YFC1504102。
文摘The Longmenshan(LMS)fault zone is located at the junction of the eastern Tibetan Plateau and the Sichuan Basin and is of great significance for studying regional tectonics and earthquake hazards.Although regional velocity models are available for the LMS fault zone,high-resolution velocity models are lacking.Therefore,a dense array of 240 short-period seismometers was deployed around the central segment of the LMS fault zone for approximately 30 days to monitor earthquakes and characterize fine structures of the fault zone.Considering the large quantity of observed seismic data,the data processing workflow consisted of deep learning-based automatic earthquake detection,phase arrival picking,and association.Compared with the earthquake catalog released by the China Earthquake Administration,many more earthquakes were detected by the dense array.Double-difference seismic tomography was adopted to determine V_(p),V_(s),and V_(p)/V_(s)models as well as earthquake locations.The checkerboard test showed that the velocity models have spatial resolutions of approximately 5 km in the horizontal directions and 2 km at depth.To the west of the Yingxiu–Beichuan Fault(YBF),the Precambrian Pengguan complex,where most of earthquakes occurred,is characterized by high velocity and low V_(p)/V_(s)values.In comparison,to the east of the YBF,the Upper Paleozoic to Jurassic sediments,where few earthquakes occurred,show low velocity and high V_(p)/V_(s)values.Our results suggest that the earthquake activity in the LMS fault zone is controlled by the strength of the rock compositions.When the high-resolution velocity models were combined with the relocated earthquakes,we were also able to delineate the fault geometry for different faults in the LMS fault zone.
文摘Crosswell seismic tomography can be used to study the lateral variation of reservoirs, reservoir properties and the dynamic movement of fluids. In view of the instability of crosswell seismic tomography, the gradient method was improved by introducing regularization, and a gradient regularization method is presented in this paper. This method was verified by processing numerical simulation data and physical model data.
文摘Mining operation, especially underground coal mining, always has the remarkable risks of ground control. Passive seismic velocity tomography based on simultaneous iterative reconstructive technique （SIRT） inversion is used to deduce the stress redistribution around the longwall mining panel. The mining-induced microseismic events were recorded by mounting an array of receivers on the surface, above the active panel. After processing and filtering the seismic data, the three-dimensional tomography images of the p-wave velocity variations by SIRT passive seismic velocity tomography were provided. To display the velocity changes on coal seam level and subsequently to infer the stress redistribution, these three-dimensional tomograms into the coal seam level were sliced. In addition, the boundary element method （BEM） was used to simulate the stress redistribution. The results show that the inferred stresses from the passive seismic tomograms are conformed to numerical models and theoretical concept of the stress redistribution around the longwall panel. In velocity tomograms, the main zones of the stress redistribution arotmd the panel, including front and side abutment pressures, and gob stress are obvious and also the movement of stress zones along the face advancement is evident. Moreover, the effect of the advance rate of the face on the stress redistribution is demonstrated in tomography images. The research result proves that the SIRT passive seismic velocity tomography has an ultimate potential for monitoring the changes of stress redistribution around the longwall mining panel continuously and subsequently to improve safety of mining operations.
基金supported by the National Natural Science Foundation of China(52174162)the Fundamental Research Funds for the Central Universities(FRF-TP-20-002A3).
文摘Accurate prediction of coal and gas outburst(CGO)hazards is paramount in gas disaster prevention and control.This paper endeavors to overcome the constraints posed by traditional prediction indexes when dealing with CGO incidents under low gas pressure conditions.In pursuit of this objective,we have studied and established a mechanical model of the working face under abnormal stress and the excitation energy conditions of CGO,and proposed a method for predicting the risk of CGO under abnormal stress.On site application verification shows that when a strong outburst hazard level prediction is issued,there is a high possibility of outburst disasters occurring.In one of the three locations where we predicted strong outburst hazards,a small outburst occurred,and the accuracy of the prediction was higher than the traditional drilling cuttings index S and drilling cuttings gas desorption index q.Finally,we discuss the mechanism of CGO under the action of stress anomalies.Based on the analysis of stress distribution changes and energy accumulation characteristics of coal under abnormal stress,this article believes that the increase in outburst risk caused by high stress abnormal gradient is mainly due to two reasons:(1)The high stress abnormal gradient leads to an increase in the plastic zone of the coal seam.After the working face advances,it indirectly leads to an increase in the gas expansion energy that can be released from the coal seam before reaching a new stress equilibrium.(2)Abnormal stress leads to increased peak stress of coal body in front of working face.When coal body in elastic area transforms to plastic area,its failure speed is accelerated,which induces accelerated gas desorption and aggravates the risk of outburst.
基金funded by the National Key Research and Development Project of China(Grant No.2021YFC3000600)the China Earthquake Science Experiment Field-Cross-fault Observation Array-Red River Fault Scientific Drilling Project Geophysical Prospecting Site Selection Project+2 种基金Anhui Province Science and Technology Breakthrough Plan Project(Key Project,202423l10050030)the Earthquake Science and Technology Spark Program of the China Earthquake Administration(XH23020YA)the Anhui Mengcheng National Geophysical Observatory Joint Open Fund(MENGO-202307)。
文摘The complex Red River fault zone(RRFZ),which is situated in the southwestern region of China and separates the Indochina plate and South China blocks,has diverse seismic activities in different segments.To reveal the detailed geometric characteristics of the RRFZ at different sections and to better understand the seismogenic environment,in 2022 and 2023 we deployed 7 seismic dense linear arrays,consisting of 574 nodal stations,across the RRFZ in the northern and southern segments near the towns Midu,Gasa,Zhega,Dazhai,Xinzhai,and Taoyuan.The linear arrays,which extend from 2.4 to 12.5 km in length with station intervals ranging between 40 and140 m,recorded seismic ambient noise for approximately one month.Using the extended range phase shift method,we extract the phase velocity dispersion curves of the Rayleigh waves between 0.9 and 10 Hz,which are then used to invert for the high resolution shearwave velocity structures across the RRFZ beneath the linear arrays.The key findings are:(1)the 7 imaged sections of the RRFZ exhibit quite similar structures,with higher velocities on the SW side and lower velocities on the NE side;the velocity variation is consistent with the surface geological structures along the RRFZ;(2)the shear-wave velocities on the SW side of the RRFZ at the northern Midu section and southern Gasa-Dazhai sections are generally higher than their counterparts in the southern Xinzhai-Taoyuan sections,which reflects lithological variations from the marble-dominated Paleoproterozoic Along basement to the gneiss dominated Paleoproterozoic Qingshuihe basement;(3)from the northern Midu section to the southern region where the RRFZ intersects with the Xiaojiang Fault,the major faults of the RRFZ exhibit a consistent high-angle,NE-dipping structure;(4)the low shear-wave velocities immediately to the NE of the velocity boundary may indicate a faulted zone due to long-term shearing,where excessive amplifications of ground motions could occur.This study provides new insights into the characteristics of the shallow structures of the RRFZ.
基金supported by the National Natural Science Foundation of China (Grant Nos.40334040 and 40974033)the Promoting Foundation for Advanced Persons of Talent of NCWU
文摘Local and global optimization methods are widely used in geophysical inversion but each has its own advantages and disadvantages. The combination of the two methods will make it possible to overcome their weaknesses. Based on the simulated annealing genetic algorithm （SAGA） and the simplex algorithm, an efficient and robust 2-D nonlinear method for seismic travel-time inversion is presented in this paper. First we do a global search over a large range by SAGA and then do a rapid local search using the simplex method. A multi-scale tomography method is adopted in order to reduce non-uniqueness. The velocity field is divided into different spatial scales and velocities at the grid nodes are taken as unknown parameters. The model is parameterized by a bi-cubic spline function. The finite-difference method is used to solve the forward problem while the hybrid method combining multi-scale SAGA and simplex algorithms is applied to the inverse problem. The algorithm has been applied to a numerical test and a travel-time perturbation test using an anomalous low-velocity body. For a practical example, it is used in the study of upper crustal velocity structure of the A＇nyemaqen suture zone at the north-east edge of the Qinghai-Tibet Plateau. The model test and practical application both prove that the method is effective and robust.
