The locations of about 400 earthquakes in Yangjiang, Guangdong Province are determined using the double, difference earthquake location algorithm （DDA）. The seismicity pattern becomes concentrated from discrete grid...The locations of about 400 earthquakes in Yangjiang, Guangdong Province are determined using the double, difference earthquake location algorithm （DDA）. The seismicity pattern becomes concentrated from discrete grids. The rupture characteristics of the Yangjiang earthquake sequence show a conjugated distribution in NW and NE directions. The major distribution trends NE and dips NE with an angle of 30^o and a length of 30km,and the minor distribution trends NW and dips SE with an angle of 30^o and a length of 20km. The focal depth is 5km - 15km. The distribution of the Enping earthquake sequence,which is not far from Yangjiang,is NW-trending. The relationship between hypocenter distribution and geological structure is discussed.展开更多
According to earthquake catalog records of Fujian Seismic Network, the Tnow method and the fourstation continuous location method put forward by Jin Xing are inspected by using P-wave arrival information of the first ...According to earthquake catalog records of Fujian Seismic Network, the Tnow method and the fourstation continuous location method put forward by Jin Xing are inspected by using P-wave arrival information of the first four stations in each earthquake. It shows that the fourstation continuous location method can locate more seismic events than the Tnow method. By analyzing the results, it is concluded that the reason for this is that the Tnow method makes use of information from stations without being triggered, while some stations failed to be reflected in earthquake catalog because of discontinuous records or unclear records of seismic phases. For seismic events whose location results can be given, there is no obvious difference in location results of the two methods and positioning deviation of most seismic events is also not significant. For earthquakes outside the network, the positioning deviation may amplify as the epicentral distance enlarges, which may relate to the situation that the seismic stations are centered on one side of epicenter and the opening angle between seismic stations used for location and epicenter is small.展开更多
In this paper,according to the Fujian Seismic Network earthquake catalog records,the T now method and the Four Stations Continuous Location method( hereinafter called FSCL)put forward by Jin Xing are inspected by usin...In this paper,according to the Fujian Seismic Network earthquake catalog records,the T now method and the Four Stations Continuous Location method( hereinafter called FSCL)put forward by Jin Xing are inspected by using P-wave arrival information of the first four stations of each seismic event. Results show that for earthquakes within the network,both methods can obtain similar location results and location deviations are small for the majority of the events. For earthquakes outside the network,the location deviation may be amplified as the epicentral distance increases,owing to the seismic station distribution which spread toward the side of the epicenter and the small opening angle between seismic stations used for locating and epicenter. For the FSCL method,the impacts of the wave velocity on the location results may be significant for earthquakes outside the network.Thus,selecting a velocity model which is similar to the actual structure of the wave velocity will contribute to improving location results of earthquakes. The FSCL method can locate more seismic events than the T now method. It concludes that the T now method makes use of mistake information from some non-triggering stations in earthquake catalog,and some P-wave arrivals are not included in the earthquake catalog due to discontinuous records or unclear records of the seismic phase,which induces incorrect location.展开更多
The intersection method is one of the basic approaches for locating earthquakes and is not only robust but also efficient. However, its location accuracy is not high, especially for focal depth because the velocity mo...The intersection method is one of the basic approaches for locating earthquakes and is not only robust but also efficient. However, its location accuracy is not high, especially for focal depth because the velocity model used for the conventional intersection method is based on homogeneous or laterally homogeneous media, which is too simple. In order to improve the accuracy, we have modified the existing intersection method. In the modified approach, the earthquake loci are not assumed to be circular or hyperbolic and calculation accuracy is improved using a minimum traveltime tree algorithm for tracing rays. The numerical model shows that the modified method can locate earthquakes in complex velocity models.展开更多
From August 21, 2000 to October 20, 2000,a fluid injection-induced seismicity experiment has been carried out in the KTB (German Continental Deep Drilling Program). The KTB seismic network recorded more than 2 700 eve...From August 21, 2000 to October 20, 2000,a fluid injection-induced seismicity experiment has been carried out in the KTB (German Continental Deep Drilling Program). The KTB seismic network recorded more than 2 700 events. Among them 237 events were of high signal-to-noise ratio, and were processed and accurately located. When the events were located, non KTB events were weeded out by Wadatis method. The standard deviation, mean and median were obtained by Jackknife's technique, and finally the events were accurately located by Gei-gers method so that the mean error is about 0.1 km. No earthquakes with focal depth greater than 9.3 km, which is nearly at the bottom of the hole, were detected. One of the explanation is that at such depths the stress levels may not close to the rocks frictional strength so that failure could not be induced by the relatively small perturbation in pore pressure. Or at these depths there may be no permeable, well-oriented faults. This depth may be in close proximity to the bottom of the hole to the brittle-ductile transition, even in this relatively stable interior of the in-teraplate. This phenomenon is explained by the experimental results and geothermal data from the superdeep bore-hole.展开更多
We have selected 171 near-field records from 391 aftershock records of the Lulong, Hebei Province, earthquake in October 1982 and relocated the hypocenter of 45 aftershocks using the program Hypoinverse. The distribut...We have selected 171 near-field records from 391 aftershock records of the Lulong, Hebei Province, earthquake in October 1982 and relocated the hypocenter of 45 aftershocks using the program Hypoinverse. The distribution of aftershocks reveals a set of earthquake faults: a WNW stretching fault truncates two NNE stretching faults. The two branches of faults show the conjugate structure which is often seen in brittle fracture. The NNE stretching faults are connected together. The Luanhe river valley near Lulong developed to a rudiment rift basin surrounded by a series of faults. The fault of Lulong earthquake is a strike-slip fault with tension component. This fault type matches with the activity of Zhangjiakou-Bohai seismic belt (Zhang-Bo belt) and also shows the action of Zhang-Bo belt as a boundary of two secondary active blocks that truncates the NNE fault.展开更多
The mainshock and aftershocks of the Hutubi M_S6.2 earthquake on December 8,2016 were relocated by applying the double difference method, and we relocated 477 earthquakes in the Hutubi region. The earthquake relocatio...The mainshock and aftershocks of the Hutubi M_S6.2 earthquake on December 8,2016 were relocated by applying the double difference method, and we relocated 477 earthquakes in the Hutubi region. The earthquake relocation results show that the aftershocks are distributed in the east-west direction towards the north side of the southern margin of the Junggar Basin fault,and are mainly distributed in the western region of the mainshock. The distance between the mainshock after relocation and the southern margin of the Junggar Basin fault is obviously shortened. Combined with the focal mechanism and the spatial distribution of the mainshock and aftershocks,it is inferred that the southern margin of the Junggar Basin fault is the main seismogenic structure of the Hutubi earthquake.展开更多
Based on relocating the Jiujiang-Ruichang earthquake sequence which occurred on November 26, 2005 in Jiangxi Province with the double-difference （DD） algorithm and master event technique, the paper discusses the foc...Based on relocating the Jiujiang-Ruichang earthquake sequence which occurred on November 26, 2005 in Jiangxi Province with the double-difference （DD） algorithm and master event technique, the paper discusses the focal mechanism of the main shock （MsS.7） and the probable seismo-tectonics. The precise relocation results indicate that the average horizontal error is 0.31kin in a EW direction and 0.40kin in a NS direction, and the average depth error is 0.48kin. The focal depths vary from 8kin to 14kin, with the predominant distribution at 10kin - 12kin. The epicenter of the main shock is relocated to be 29.69^oN, 115.74^oE and the focal depth is about 10.Skin. Combining the predominant distribution of the earthquake sequence, the focal mechanism of the main shock and the tectonic conditions of N-E- and NW-strike faults growth in the seismic region, we infer that the main shock of the earthquake sequence was caused by a NW striking buried fault in the Rnichang basin. The nature of seismic faults needs to be further explored.展开更多
Five mobile digital seismic stations were set up by the Earthquake Administration of Yunnan Province near the epicenter of the main shock after the Ning＇er M6. 4 earthquake on June 3, 2007. In this paper, the aftersh...Five mobile digital seismic stations were set up by the Earthquake Administration of Yunnan Province near the epicenter of the main shock after the Ning＇er M6. 4 earthquake on June 3, 2007. In this paper, the aftershock sequence of the Ning＇er M6. 4 earthquake is relocated by using the double difference earthquake location method. The data is from the 5 mobile digital seismic stations and the permanent Simao seismic station. The results show that the length of the aftershock sequence is 40kin and the width is 30km, concentrated obviously at the lateral displacement area between the Pu＇er fault and the NNE-trending faults, with the majority occurring on the Pu＇er fault around the main shock. The depths of aftershocks are from 2kin to 12km, and the predominant distribution is in the depth of 8 ~ 10km. The mean depth is 7. 9kin. The seismic fault dips to the northwest revealed from the profile parallel to this aftershock sequence, which is identical to the dip of the secondary fault of the NE-trending Menglian-Mojiang fault in the earthquake area. There are more earthquakes concentrated in the northwest segment than in the southeast segment, which is perhaps related to the underground medium and faults. The depth profile of the earthquake sequence shows that the relocated earthquakes are mainly located near the Pu＇er fault and the seismic faults dip to the southwest, consistent with the dip of the west branch of the Pu＇er fault. In all, the fault strike revealed by earthquake relocations matches well with the strike in the focal mechanism solutions. The main shock is in the top of the aftershock sequence and the aftershocks are symmetrically distributed, showing that faulting was complete in both the NE and SW directions.展开更多
The Longmenshan(LMS)fault zone is located at the junction of the eastern Tibetan Plateau and the Sichuan Basin and is of great significance for studying regional tectonics and earthquake hazards.Although regional velo...The Longmenshan(LMS)fault zone is located at the junction of the eastern Tibetan Plateau and the Sichuan Basin and is of great significance for studying regional tectonics and earthquake hazards.Although regional velocity models are available for the LMS fault zone,high-resolution velocity models are lacking.Therefore,a dense array of 240 short-period seismometers was deployed around the central segment of the LMS fault zone for approximately 30 days to monitor earthquakes and characterize fine structures of the fault zone.Considering the large quantity of observed seismic data,the data processing workflow consisted of deep learning-based automatic earthquake detection,phase arrival picking,and association.Compared with the earthquake catalog released by the China Earthquake Administration,many more earthquakes were detected by the dense array.Double-difference seismic tomography was adopted to determine V_(p),V_(s),and V_(p)/V_(s)models as well as earthquake locations.The checkerboard test showed that the velocity models have spatial resolutions of approximately 5 km in the horizontal directions and 2 km at depth.To the west of the Yingxiu–Beichuan Fault(YBF),the Precambrian Pengguan complex,where most of earthquakes occurred,is characterized by high velocity and low V_(p)/V_(s)values.In comparison,to the east of the YBF,the Upper Paleozoic to Jurassic sediments,where few earthquakes occurred,show low velocity and high V_(p)/V_(s)values.Our results suggest that the earthquake activity in the LMS fault zone is controlled by the strength of the rock compositions.When the high-resolution velocity models were combined with the relocated earthquakes,we were also able to delineate the fault geometry for different faults in the LMS fault zone.展开更多
Characteristics of the main shock and aftershocks of the Dingri M_(S)6.8 earthquake in the Xizang Autonomous region were determined by the double-difference location method using phase reports from Jan. 7 to Jan. 16, ...Characteristics of the main shock and aftershocks of the Dingri M_(S)6.8 earthquake in the Xizang Autonomous region were determined by the double-difference location method using phase reports from Jan. 7 to Jan. 16, 2025. We find that the aftershocks were generally distributed in a near NS direction along the Dengmoduo fault, with a long axis of about 70 km. There is an obvious seismic gap to the north side of the main shock, which is consistent with the location of the maximum rupture point as revealed by surface survey of the rupture and inversion analysis of the rupture process. In addition, the aftershock distribution exhibits obvious north-south segmentation characteristics. These observations suggest that the seismic fault of the main shock was likely to have been the Dengmoduo fault, which is NS and slightly inclined to the west.展开更多
The double-difference earthquake relocation algorithm (DD algorithm) has been applied to the accurate relocation of 10057 earthquakes in the central-western China (21°-36°N, 98°-112E°) during the p...The double-difference earthquake relocation algorithm (DD algorithm) has been applied to the accurate relocation of 10057 earthquakes in the central-western China (21°-36°N, 98°-112E°) during the period of 1992-1999. In total, 79706 readings for P waves and 72169 readings for S waves were used in the relocation, and the source parameters of 6496 events were obtained. The relocation results revealed a more complete picture of the hypocentral distribution in the central-western China. In several seismic belts the relocated epicenters present a more defined lineation feature, reflecting the close correlation between the seismicity and the active tectonic structures. The relocated focal depths confirmed that most earthquakes (91 percent of the 6496 relocated events) in the central-western China were located at shallower depths not deeper than 20 km. The distribution of focal depths indicates that the seismogenic layer in the central-western China is located in the upper-mid crust with its thickness no deeper than 20 km.展开更多
The great Tancheng earthquake of M81/2 occurred in 1668 was the largest seismic event ever recorded in history in eastern China. This study determines the fault geometry of this earthquake by inverting seismological ...The great Tancheng earthquake of M81/2 occurred in 1668 was the largest seismic event ever recorded in history in eastern China. This study determines the fault geometry of this earthquake by inverting seismological data of present-day moderate-small earthquakes in the focal area. We relocated those earthquakes with the double-difference method and found focal mechanism solutions using gird test method. The inversion results are as follows： the strike is 21.6°, the dip angle is 89.5°, the slip angle is 170°, the fault length is about 160 km, the lower-boundary depth is about 32 km and the buried depth of upper boundary is about 4 km. This shows that the seismic fault is a NNE-trending upright right-lateral strike-slip fault and has cut through the crust. Moreover, the surface seismic fault, intensity distribution of the earthquake, earthquake-depth distribution and seismic-wave velocity profile in the focal area all verified our study result.展开更多
On August 6,2023,a magnitude MW5.5 earthquake struck Pingyuan County,Dezhou City,Shandong Province,China.This event was significant as no large earthquakes had been recorded in the region for over a century,and no act...On August 6,2023,a magnitude MW5.5 earthquake struck Pingyuan County,Dezhou City,Shandong Province,China.This event was significant as no large earthquakes had been recorded in the region for over a century,and no active fault had been previously identified.This study collects 1309 P-wave arrival times and 866 S-wave arrival times from 74 seismic stations less than 200 km to the epicenter to constrain the spatial distribution of the mainshock and its 125 early aftershocks by the double difference earthquake relocation method,and selects 864 P-waveforms from 288 stations located within 800 km of the epicenter to constrain the focal mechanism solution of the mainshock through centroid moment tensor inversion.The relocation and the inversion indicate,the Pingyuan MW5.5 earthquake was caused by a rupture on a buried fault,likely an extensive segment of the Gaotang fault.This buried fault exhibited a dip of approximately 75°to the northwest,with a strike of 222°,similar to the Gaotang fault.The rupture initiated at the depth of 18.6 km and propagated upward and northeastward.However,the ground surface was not broken.The total duration of the rupture was~6.0 s,releasing the scalar moment of 2.5895×1017 N·m,equivalent to MW5.54.The moment rate reached the maximum only 1.4 seconds after the rupture initiation,and the 90%scalar moment was released in the first 4.6 s.In the first 1.4 seconds of the rupture process,the rupture velocity was estimated to be 2.6 km/s,slower than the local S-wave velocity.As the rupture neared its end,the rupture velocity decreased significantly.This study provides valuable insights into the seismic characteristics of the Pingyuan MW5.5 earthquake,shedding light on the previously unidentified buried fault responsible for the seismic activity in the region.Understanding the behavior of such faults is crucial for assessing seismic hazards and enhancing earthquake preparedness in the future.展开更多
Based on the seismic phase reports of the Yangbi area from January 1 to June 25,2021,and the waveform data of M≥4 earthquakes,we obtained the relocation results and focal mechanism solutions of the M_(S)6.4 Yangbi ea...Based on the seismic phase reports of the Yangbi area from January 1 to June 25,2021,and the waveform data of M≥4 earthquakes,we obtained the relocation results and focal mechanism solutions of the M_(S)6.4 Yangbi earthquake sequence using the HypoDD and CAP methods.Based on our results,our main conclusions are as follows:(1)the M_(S)6.4 Yangbi earthquake sequence is a typical foreshock-mainshock-aftershock sequence.The fore-shocks of the first two stages have the obvious fronts of migration and their migration rate increased gradually.There was no apparent front of migration during the third stage,and the occurrence of the mainshock was related to stress triggering from a M5.3 foreshock.We tentatively speculate that the rupture pattern of the Yangbi earthquake sequence conforms to the cascading-rupture model;and(2)the main fault of the M_(S)6.4 Yangbi earthquake sequence is a NW-trending right-lateral strike-slip fault.As time progressed,a minor conjugate aftershock belt formed at the northwest end of this fault,and a dendritic branching structure emerged in the southern fault segment,showing a complex seismogenic fault structure.We suggested that the fault of the Yangbi earthquake sequence may be a young sub-fault of the Weixi-Weishan fault.展开更多
The high-resolution hypocenter locations of the mainshocks on July 21 （M6.2） and October 16, 2003 （M6.1） and their aftershock sequences are determined in Dayao, Yunnan by using a double-difference earthquake locat...The high-resolution hypocenter locations of the mainshocks on July 21 （M6.2） and October 16, 2003 （M6.1） and their aftershock sequences are determined in Dayao, Yunnan by using a double-difference earthquake location algorithm. The results show that the epicenters of the two mainshocks are very close to each other and the distribution of the aftershock sequence appears to be very linear. The distribution of the earthquake sequence is very consistent with the focal mechanism, and both mainshocks are of nearly vertical right-lateral fault. Unlike most other double earthquakes in the Yunmm area, the aftershock distribution of the M6.2 and M6.1 Dayao earthquakes does not appear to be a conjugated distribution but to be in a line, and there are some stacks in the two earthquake sequences. It can be inferred that they are all controlled by the same fault. The distribution of aftershocks is asymmetrical with respect to the mainshock location and appears to be unilateral. The aftershocks of the M6.2 mainshock centralize in the northwest of M6.2 earthquake and the aftershocks of the M6.1 earthquake are in the southeast of the mainshock, moreover, the M6.1 earthquake appears to be another rupture on the southeastern extensiou of the same fault as the M6.2 earthquake. The results of Coulomb failure static stress changes △σf show that the earthquake on July 21 （M6.2） apparently triggered the earthquake on October 16 （M6.1）, the two mainshocks have stress triggering to their off-fault aftershocks to different extents, and the M6.5 earthquake that occurred in Yao＇an in 2000 also triggered the occurrence of the two Dayao earthquakes.展开更多
Using the double-difference earthquake location algorithm,the deterministic method (PTD method) and the CAP seismic moment tensor inversion method,the paper selects the primary waveform data of 78 earthquakes recorded...Using the double-difference earthquake location algorithm,the deterministic method (PTD method) and the CAP seismic moment tensor inversion method,the paper selects the primary waveform data of 78 earthquakes recorded by the "China Earthquake Science Array Probe Project in the Northern Part of North South Seismic Belt ",the "China Earthquake Scientific Exploration Array Data Center"of Institute of Geophysics,China Earthquake Administration,and the Inner Mongolia Digital Seismic Network to calculate the focal depths of the mainshock and the seismic sequence of the M_S5.8 Alxa Left Banner earthquake in Inner Mongolia. The results show that the focal depth of the main shock is 20. 6 km,determined by the double-difference earthquake location method,18. 1 km by the PTD method,and 19. 2 km by the CAP method. The focal depth of the earthquake sequence calculated by the double-difference location method is larger. The deterministic method (PTD method) and double-difference location method are the methods that fit the tectonic characteristics of the seismic source area,and the CAP method is suitable for larger earthquakes.展开更多
The precise determination of earthquake location is the fundamental basis in seismological community,and is crucial for analyzing seismic activity and performing seismic tomography.First arrivals are generally used to...The precise determination of earthquake location is the fundamental basis in seismological community,and is crucial for analyzing seismic activity and performing seismic tomography.First arrivals are generally used to practically determine earthquake locations.However,first-arrival traveltimes are not sensitive to focal depths.Moreover,they cannot accurately constrain focal depths.To improve the accuracy,researchers have analyzed the depth phases of earthquake locations.The traveltimes of depth phases are sensitive to focal depths,and the joint inversion of depth phases and direct phases can be implemented to potentially obtain accurate earthquake locations.Generally,researchers can determine earthquake locations in layered models.Because layered models can only represent the first-order feature of subsurface structures,the advantages of joint inversion are not fully explored if layered models are used.To resolve the issue of current joint inversions,we use the traveltimes of three seismic phases to determine earthquake locations in heterogeneous models.The three seismic phases used in this study are the first P-,sPg-and PmP-waves.We calculate the traveltimes of the three seismic phases by solving an eikonal equation with an upwind difference scheme and use the traveltimes to determine earthquake locations.To verify the accuracy of the earthquake location method by the inversion of three seismic phases,we take the 2021 M_(S)6.4 Yangbi,Yunnan earthquake as an example and locate this earthquake using synthetic and real seismic data.Numerical tests demonstrate that the eikonal equation-based earthquake location method,which involves the inversion of multiple phase arrivals,can effectively improve earthquake location accuracy.展开更多
The 2021 Qinghai Maduo M_(S)7.4 earthquake was one of the strongest earthquakes that occurred in the Bayan Har block of the Tibetan Plateau during the past 30 years,which spatially filled in the gap of strong earthqua...The 2021 Qinghai Maduo M_(S)7.4 earthquake was one of the strongest earthquakes that occurred in the Bayan Har block of the Tibetan Plateau during the past 30 years,which spatially filled in the gap of strong earthquake in the eastern section of the northern block boundary.In this study,the aftershock sequence within 8 days after the mainshock was relocated by double difference algorithm.The results show that the total length of the aftershock zone is approximately 170 km;the mainshock epicenter is located in the center of the aftershock zone,indicating a bilateral rupture.The aftershocks are mainly distributed along NWW direction with an overall strike of 285°.The focal depth profiles indicate that the seismogenic fault is nearly vertical and dips to southwest or northeast in different sections,indicating a complex geometry.There is an aftershock gap located to the southeast of the mainshock epicenter with a scale of approximately 20 km.At the eastern end of the aftershock zone,horsetaillike branch faults show the terminal effect of a large strike-slip fault.There is a NW-trending aftershock zone on the north side of the western section,which may be a branch fault triggered by the mainshock.The location of the aftershock sequence is close to the eastern section of the Kunlun Mountain Pass-Jiangcuo(KMPJ)fault.The sequence overlaps well with surface trace of the KMPJ fault.We speculate that the KMPJ fault is the main seismogenic fault of the M_(S)7.4 Maduo earthquake.展开更多
基金The research was sponsored by the Key Science and Technology R&D Program of Guangdong Province(Grant No. 2005B32601003)
文摘The locations of about 400 earthquakes in Yangjiang, Guangdong Province are determined using the double, difference earthquake location algorithm （DDA）. The seismicity pattern becomes concentrated from discrete grids. The rupture characteristics of the Yangjiang earthquake sequence show a conjugated distribution in NW and NE directions. The major distribution trends NE and dips NE with an angle of 30^o and a length of 30km,and the minor distribution trends NW and dips SE with an angle of 30^o and a length of 20km. The focal depth is 5km - 15km. The distribution of the Enping earthquake sequence,which is not far from Yangjiang,is NW-trending. The relationship between hypocenter distribution and geological structure is discussed.
文摘According to earthquake catalog records of Fujian Seismic Network, the Tnow method and the fourstation continuous location method put forward by Jin Xing are inspected by using P-wave arrival information of the first four stations in each earthquake. It shows that the fourstation continuous location method can locate more seismic events than the Tnow method. By analyzing the results, it is concluded that the reason for this is that the Tnow method makes use of information from stations without being triggered, while some stations failed to be reflected in earthquake catalog because of discontinuous records or unclear records of seismic phases. For seismic events whose location results can be given, there is no obvious difference in location results of the two methods and positioning deviation of most seismic events is also not significant. For earthquakes outside the network, the positioning deviation may amplify as the epicentral distance enlarges, which may relate to the situation that the seismic stations are centered on one side of epicenter and the opening angle between seismic stations used for location and epicenter is small.
基金funded by the National Key Technology R&D Program of China(2009BAK55B02)
文摘In this paper,according to the Fujian Seismic Network earthquake catalog records,the T now method and the Four Stations Continuous Location method( hereinafter called FSCL)put forward by Jin Xing are inspected by using P-wave arrival information of the first four stations of each seismic event. Results show that for earthquakes within the network,both methods can obtain similar location results and location deviations are small for the majority of the events. For earthquakes outside the network,the location deviation may be amplified as the epicentral distance increases,owing to the seismic station distribution which spread toward the side of the epicenter and the small opening angle between seismic stations used for locating and epicenter. For the FSCL method,the impacts of the wave velocity on the location results may be significant for earthquakes outside the network.Thus,selecting a velocity model which is similar to the actual structure of the wave velocity will contribute to improving location results of earthquakes. The FSCL method can locate more seismic events than the T now method. It concludes that the T now method makes use of mistake information from some non-triggering stations in earthquake catalog,and some P-wave arrivals are not included in the earthquake catalog due to discontinuous records or unclear records of the seismic phase,which induces incorrect location.
基金This work is supported by the National Natural Science Foundation of China(40674044)the Special Foundation for Basic Professional Scientific Research (DQJB06A02)
文摘The intersection method is one of the basic approaches for locating earthquakes and is not only robust but also efficient. However, its location accuracy is not high, especially for focal depth because the velocity model used for the conventional intersection method is based on homogeneous or laterally homogeneous media, which is too simple. In order to improve the accuracy, we have modified the existing intersection method. In the modified approach, the earthquake loci are not assumed to be circular or hyperbolic and calculation accuracy is improved using a minimum traveltime tree algorithm for tracing rays. The numerical model shows that the modified method can locate earthquakes in complex velocity models.
文摘From August 21, 2000 to October 20, 2000,a fluid injection-induced seismicity experiment has been carried out in the KTB (German Continental Deep Drilling Program). The KTB seismic network recorded more than 2 700 events. Among them 237 events were of high signal-to-noise ratio, and were processed and accurately located. When the events were located, non KTB events were weeded out by Wadatis method. The standard deviation, mean and median were obtained by Jackknife's technique, and finally the events were accurately located by Gei-gers method so that the mean error is about 0.1 km. No earthquakes with focal depth greater than 9.3 km, which is nearly at the bottom of the hole, were detected. One of the explanation is that at such depths the stress levels may not close to the rocks frictional strength so that failure could not be induced by the relatively small perturbation in pore pressure. Or at these depths there may be no permeable, well-oriented faults. This depth may be in close proximity to the bottom of the hole to the brittle-ductile transition, even in this relatively stable interior of the in-teraplate. This phenomenon is explained by the experimental results and geothermal data from the superdeep bore-hole.
基金National Natural Science Foundation of China (40234038).
文摘We have selected 171 near-field records from 391 aftershock records of the Lulong, Hebei Province, earthquake in October 1982 and relocated the hypocenter of 45 aftershocks using the program Hypoinverse. The distribution of aftershocks reveals a set of earthquake faults: a WNW stretching fault truncates two NNE stretching faults. The two branches of faults show the conjugate structure which is often seen in brittle fracture. The NNE stretching faults are connected together. The Luanhe river valley near Lulong developed to a rudiment rift basin surrounded by a series of faults. The fault of Lulong earthquake is a strike-slip fault with tension component. This fault type matches with the activity of Zhangjiakou-Bohai seismic belt (Zhang-Bo belt) and also shows the action of Zhang-Bo belt as a boundary of two secondary active blocks that truncates the NNE fault.
基金supported by the Science for Earthquake Resilience,China Earthquake Administration(XH17043Y)the Basic Scientific Research Expenses of Institute of Geophysics,China Earthquake Administration(DQJB16A04)+1 种基金the Special Tasks of Youth Backbone Training of Seismic Network,China Earthquake Administration(20170627)the Earthquake Science Foundation of Xinjiang(201711)
文摘The mainshock and aftershocks of the Hutubi M_S6.2 earthquake on December 8,2016 were relocated by applying the double difference method, and we relocated 477 earthquakes in the Hutubi region. The earthquake relocation results show that the aftershocks are distributed in the east-west direction towards the north side of the southern margin of the Junggar Basin fault,and are mainly distributed in the western region of the mainshock. The distance between the mainshock after relocation and the southern margin of the Junggar Basin fault is obviously shortened. Combined with the focal mechanism and the spatial distribution of the mainshock and aftershocks,it is inferred that the southern margin of the Junggar Basin fault is the main seismogenic structure of the Hutubi earthquake.
基金This research was supported by the Joint Earthquake Science Foundation (A07124)the project of"Application of Digital Seismic Data to Short-impending Tracing"of China Earthquake Administration (120602-06-114)
文摘Based on relocating the Jiujiang-Ruichang earthquake sequence which occurred on November 26, 2005 in Jiangxi Province with the double-difference （DD） algorithm and master event technique, the paper discusses the focal mechanism of the main shock （MsS.7） and the probable seismo-tectonics. The precise relocation results indicate that the average horizontal error is 0.31kin in a EW direction and 0.40kin in a NS direction, and the average depth error is 0.48kin. The focal depths vary from 8kin to 14kin, with the predominant distribution at 10kin - 12kin. The epicenter of the main shock is relocated to be 29.69^oN, 115.74^oE and the focal depth is about 10.Skin. Combining the predominant distribution of the earthquake sequence, the focal mechanism of the main shock and the tectonic conditions of N-E- and NW-strike faults growth in the seismic region, we infer that the main shock of the earthquake sequence was caused by a NW striking buried fault in the Rnichang basin. The nature of seismic faults needs to be further explored.
基金sponsored by the Joint Earthquake Science Foundation,China (200804)
文摘Five mobile digital seismic stations were set up by the Earthquake Administration of Yunnan Province near the epicenter of the main shock after the Ning＇er M6. 4 earthquake on June 3, 2007. In this paper, the aftershock sequence of the Ning＇er M6. 4 earthquake is relocated by using the double difference earthquake location method. The data is from the 5 mobile digital seismic stations and the permanent Simao seismic station. The results show that the length of the aftershock sequence is 40kin and the width is 30km, concentrated obviously at the lateral displacement area between the Pu＇er fault and the NNE-trending faults, with the majority occurring on the Pu＇er fault around the main shock. The depths of aftershocks are from 2kin to 12km, and the predominant distribution is in the depth of 8 ~ 10km. The mean depth is 7. 9kin. The seismic fault dips to the northwest revealed from the profile parallel to this aftershock sequence, which is identical to the dip of the secondary fault of the NE-trending Menglian-Mojiang fault in the earthquake area. There are more earthquakes concentrated in the northwest segment than in the southeast segment, which is perhaps related to the underground medium and faults. The depth profile of the earthquake sequence shows that the relocated earthquakes are mainly located near the Pu＇er fault and the seismic faults dip to the southwest, consistent with the dip of the west branch of the Pu＇er fault. In all, the fault strike revealed by earthquake relocations matches well with the strike in the focal mechanism solutions. The main shock is in the top of the aftershock sequence and the aftershocks are symmetrically distributed, showing that faulting was complete in both the NE and SW directions.
基金supported by the Scientific Research Foundation for High-level Talents of Anhui University of Science and Technology under Grant 2024yjrc64the National Key R&D Program of China under Grant 2018YFC1504102。
文摘The Longmenshan(LMS)fault zone is located at the junction of the eastern Tibetan Plateau and the Sichuan Basin and is of great significance for studying regional tectonics and earthquake hazards.Although regional velocity models are available for the LMS fault zone,high-resolution velocity models are lacking.Therefore,a dense array of 240 short-period seismometers was deployed around the central segment of the LMS fault zone for approximately 30 days to monitor earthquakes and characterize fine structures of the fault zone.Considering the large quantity of observed seismic data,the data processing workflow consisted of deep learning-based automatic earthquake detection,phase arrival picking,and association.Compared with the earthquake catalog released by the China Earthquake Administration,many more earthquakes were detected by the dense array.Double-difference seismic tomography was adopted to determine V_(p),V_(s),and V_(p)/V_(s)models as well as earthquake locations.The checkerboard test showed that the velocity models have spatial resolutions of approximately 5 km in the horizontal directions and 2 km at depth.To the west of the Yingxiu–Beichuan Fault(YBF),the Precambrian Pengguan complex,where most of earthquakes occurred,is characterized by high velocity and low V_(p)/V_(s)values.In comparison,to the east of the YBF,the Upper Paleozoic to Jurassic sediments,where few earthquakes occurred,show low velocity and high V_(p)/V_(s)values.Our results suggest that the earthquake activity in the LMS fault zone is controlled by the strength of the rock compositions.When the high-resolution velocity models were combined with the relocated earthquakes,we were also able to delineate the fault geometry for different faults in the LMS fault zone.
基金sponsored by National Key R&D Program of China (No. 2023YFC3012005-3, No.2018YFE0109700)Earthquake Joint Funds of NSFC (No. U2039205)Task of earthquake monitoring, forecasting and early warning, China Earthquake Adminstration (CEA-ZQGZ-202501059)。
文摘Characteristics of the main shock and aftershocks of the Dingri M_(S)6.8 earthquake in the Xizang Autonomous region were determined by the double-difference location method using phase reports from Jan. 7 to Jan. 16, 2025. We find that the aftershocks were generally distributed in a near NS direction along the Dengmoduo fault, with a long axis of about 70 km. There is an obvious seismic gap to the north side of the main shock, which is consistent with the location of the maximum rupture point as revealed by surface survey of the rupture and inversion analysis of the rupture process. In addition, the aftershock distribution exhibits obvious north-south segmentation characteristics. These observations suggest that the seismic fault of the main shock was likely to have been the Dengmoduo fault, which is NS and slightly inclined to the west.
文摘The double-difference earthquake relocation algorithm (DD algorithm) has been applied to the accurate relocation of 10057 earthquakes in the central-western China (21°-36°N, 98°-112E°) during the period of 1992-1999. In total, 79706 readings for P waves and 72169 readings for S waves were used in the relocation, and the source parameters of 6496 events were obtained. The relocation results revealed a more complete picture of the hypocentral distribution in the central-western China. In several seismic belts the relocated epicenters present a more defined lineation feature, reflecting the close correlation between the seismicity and the active tectonic structures. The relocated focal depths confirmed that most earthquakes (91 percent of the 6496 relocated events) in the central-western China were located at shallower depths not deeper than 20 km. The distribution of focal depths indicates that the seismogenic layer in the central-western China is located in the upper-mid crust with its thickness no deeper than 20 km.
基金supported by the National Natural Science Foundation of China(No.90814002)the Natural Science Foundation of Shandong Province(No.Y2005E02)
文摘The great Tancheng earthquake of M81/2 occurred in 1668 was the largest seismic event ever recorded in history in eastern China. This study determines the fault geometry of this earthquake by inverting seismological data of present-day moderate-small earthquakes in the focal area. We relocated those earthquakes with the double-difference method and found focal mechanism solutions using gird test method. The inversion results are as follows： the strike is 21.6°, the dip angle is 89.5°, the slip angle is 170°, the fault length is about 160 km, the lower-boundary depth is about 32 km and the buried depth of upper boundary is about 4 km. This shows that the seismic fault is a NNE-trending upright right-lateral strike-slip fault and has cut through the crust. Moreover, the surface seismic fault, intensity distribution of the earthquake, earthquake-depth distribution and seismic-wave velocity profile in the focal area all verified our study result.
基金support from the National Natural Science Foundation of China(Nos.42104043,42374081,and U2039208)the Fundamental Research Funds for the Institute of Geophysics,China Earthquake Administration(No.DQJB22R35).
文摘On August 6,2023,a magnitude MW5.5 earthquake struck Pingyuan County,Dezhou City,Shandong Province,China.This event was significant as no large earthquakes had been recorded in the region for over a century,and no active fault had been previously identified.This study collects 1309 P-wave arrival times and 866 S-wave arrival times from 74 seismic stations less than 200 km to the epicenter to constrain the spatial distribution of the mainshock and its 125 early aftershocks by the double difference earthquake relocation method,and selects 864 P-waveforms from 288 stations located within 800 km of the epicenter to constrain the focal mechanism solution of the mainshock through centroid moment tensor inversion.The relocation and the inversion indicate,the Pingyuan MW5.5 earthquake was caused by a rupture on a buried fault,likely an extensive segment of the Gaotang fault.This buried fault exhibited a dip of approximately 75°to the northwest,with a strike of 222°,similar to the Gaotang fault.The rupture initiated at the depth of 18.6 km and propagated upward and northeastward.However,the ground surface was not broken.The total duration of the rupture was~6.0 s,releasing the scalar moment of 2.5895×1017 N·m,equivalent to MW5.54.The moment rate reached the maximum only 1.4 seconds after the rupture initiation,and the 90%scalar moment was released in the first 4.6 s.In the first 1.4 seconds of the rupture process,the rupture velocity was estimated to be 2.6 km/s,slower than the local S-wave velocity.As the rupture neared its end,the rupture velocity decreased significantly.This study provides valuable insights into the seismic characteristics of the Pingyuan MW5.5 earthquake,shedding light on the previously unidentified buried fault responsible for the seismic activity in the region.Understanding the behavior of such faults is crucial for assessing seismic hazards and enhancing earthquake preparedness in the future.
文摘Based on the seismic phase reports of the Yangbi area from January 1 to June 25,2021,and the waveform data of M≥4 earthquakes,we obtained the relocation results and focal mechanism solutions of the M_(S)6.4 Yangbi earthquake sequence using the HypoDD and CAP methods.Based on our results,our main conclusions are as follows:(1)the M_(S)6.4 Yangbi earthquake sequence is a typical foreshock-mainshock-aftershock sequence.The fore-shocks of the first two stages have the obvious fronts of migration and their migration rate increased gradually.There was no apparent front of migration during the third stage,and the occurrence of the mainshock was related to stress triggering from a M5.3 foreshock.We tentatively speculate that the rupture pattern of the Yangbi earthquake sequence conforms to the cascading-rupture model;and(2)the main fault of the M_(S)6.4 Yangbi earthquake sequence is a NW-trending right-lateral strike-slip fault.As time progressed,a minor conjugate aftershock belt formed at the northwest end of this fault,and a dendritic branching structure emerged in the southern fault segment,showing a complex seismogenic fault structure.We suggested that the fault of the Yangbi earthquake sequence may be a young sub-fault of the Weixi-Weishan fault.
基金This project was sponsored by the National Programon KeyBasic Research Projects (2004CB418406) ,the Programfor the Tenth"Five-Year Plan"of China (2004BA601B01-04-03) andthe Joint Earthquake Science Foundation of China (606042) .
文摘The high-resolution hypocenter locations of the mainshocks on July 21 （M6.2） and October 16, 2003 （M6.1） and their aftershock sequences are determined in Dayao, Yunnan by using a double-difference earthquake location algorithm. The results show that the epicenters of the two mainshocks are very close to each other and the distribution of the aftershock sequence appears to be very linear. The distribution of the earthquake sequence is very consistent with the focal mechanism, and both mainshocks are of nearly vertical right-lateral fault. Unlike most other double earthquakes in the Yunmm area, the aftershock distribution of the M6.2 and M6.1 Dayao earthquakes does not appear to be a conjugated distribution but to be in a line, and there are some stacks in the two earthquake sequences. It can be inferred that they are all controlled by the same fault. The distribution of aftershocks is asymmetrical with respect to the mainshock location and appears to be unilateral. The aftershocks of the M6.2 mainshock centralize in the northwest of M6.2 earthquake and the aftershocks of the M6.1 earthquake are in the southeast of the mainshock, moreover, the M6.1 earthquake appears to be another rupture on the southeastern extensiou of the same fault as the M6.2 earthquake. The results of Coulomb failure static stress changes △σf show that the earthquake on July 21 （M6.2） apparently triggered the earthquake on October 16 （M6.1）, the two mainshocks have stress triggering to their off-fault aftershocks to different extents, and the M6.5 earthquake that occurred in Yao＇an in 2000 also triggered the occurrence of the two Dayao earthquakes.
基金funded by the “Three-in-one Task of Monitoring,Prediction and Research” of China Earthquake Administration(CEA-JC/3JH-1605031)Major Science and Technology Projects in Inner Mongolia Autonomous Region:Research,Development,Popularization and Demonstration of Earthquake Prediction and Early Warning Technology in Key Areas
文摘Using the double-difference earthquake location algorithm,the deterministic method (PTD method) and the CAP seismic moment tensor inversion method,the paper selects the primary waveform data of 78 earthquakes recorded by the "China Earthquake Science Array Probe Project in the Northern Part of North South Seismic Belt ",the "China Earthquake Scientific Exploration Array Data Center"of Institute of Geophysics,China Earthquake Administration,and the Inner Mongolia Digital Seismic Network to calculate the focal depths of the mainshock and the seismic sequence of the M_S5.8 Alxa Left Banner earthquake in Inner Mongolia. The results show that the focal depth of the main shock is 20. 6 km,determined by the double-difference earthquake location method,18. 1 km by the PTD method,and 19. 2 km by the CAP method. The focal depth of the earthquake sequence calculated by the double-difference location method is larger. The deterministic method (PTD method) and double-difference location method are the methods that fit the tectonic characteristics of the seismic source area,and the CAP method is suitable for larger earthquakes.
基金supported by the National Natural Science Foundation of China(Grant Nos.42174111 and42064004)the Beijing Natural Science Foundation(Grant No.8222033)the Ningxia Science and Technology Leading Talent Training Program(Grant No.2022GKLRLX04)。
文摘The precise determination of earthquake location is the fundamental basis in seismological community,and is crucial for analyzing seismic activity and performing seismic tomography.First arrivals are generally used to practically determine earthquake locations.However,first-arrival traveltimes are not sensitive to focal depths.Moreover,they cannot accurately constrain focal depths.To improve the accuracy,researchers have analyzed the depth phases of earthquake locations.The traveltimes of depth phases are sensitive to focal depths,and the joint inversion of depth phases and direct phases can be implemented to potentially obtain accurate earthquake locations.Generally,researchers can determine earthquake locations in layered models.Because layered models can only represent the first-order feature of subsurface structures,the advantages of joint inversion are not fully explored if layered models are used.To resolve the issue of current joint inversions,we use the traveltimes of three seismic phases to determine earthquake locations in heterogeneous models.The three seismic phases used in this study are the first P-,sPg-and PmP-waves.We calculate the traveltimes of the three seismic phases by solving an eikonal equation with an upwind difference scheme and use the traveltimes to determine earthquake locations.To verify the accuracy of the earthquake location method by the inversion of three seismic phases,we take the 2021 M_(S)6.4 Yangbi,Yunnan earthquake as an example and locate this earthquake using synthetic and real seismic data.Numerical tests demonstrate that the eikonal equation-based earthquake location method,which involves the inversion of multiple phase arrivals,can effectively improve earthquake location accuracy.
基金supported by the National Key R&D Program of China(Grant No.2018YFC1504103)the National Natural Science Foundation of China(Grant No.41774067)+1 种基金the Special Fund of the Institute of Geophysics,China Earthquake Administration(Grant No.DQJB20X07)S&T Program of Qinghai Province(Grant No.2020-ZJ-752).
文摘The 2021 Qinghai Maduo M_(S)7.4 earthquake was one of the strongest earthquakes that occurred in the Bayan Har block of the Tibetan Plateau during the past 30 years,which spatially filled in the gap of strong earthquake in the eastern section of the northern block boundary.In this study,the aftershock sequence within 8 days after the mainshock was relocated by double difference algorithm.The results show that the total length of the aftershock zone is approximately 170 km;the mainshock epicenter is located in the center of the aftershock zone,indicating a bilateral rupture.The aftershocks are mainly distributed along NWW direction with an overall strike of 285°.The focal depth profiles indicate that the seismogenic fault is nearly vertical and dips to southwest or northeast in different sections,indicating a complex geometry.There is an aftershock gap located to the southeast of the mainshock epicenter with a scale of approximately 20 km.At the eastern end of the aftershock zone,horsetaillike branch faults show the terminal effect of a large strike-slip fault.There is a NW-trending aftershock zone on the north side of the western section,which may be a branch fault triggered by the mainshock.The location of the aftershock sequence is close to the eastern section of the Kunlun Mountain Pass-Jiangcuo(KMPJ)fault.The sequence overlaps well with surface trace of the KMPJ fault.We speculate that the KMPJ fault is the main seismogenic fault of the M_(S)7.4 Maduo earthquake.
