The electric double layer(EDL)at the electrochemical interface is crucial for ion transport,charge transfer,and surface reactions in aqueous rechargeable zinc batteries(ARZBs).However,Zn anodes routinely encounter per...The electric double layer(EDL)at the electrochemical interface is crucial for ion transport,charge transfer,and surface reactions in aqueous rechargeable zinc batteries(ARZBs).However,Zn anodes routinely encounter persistent dendrite growth and parasitic reactions,driven by the inhomogeneous charge distribution and water-dominated environment within the EDL.Compounding this,classical EDL theory,rooted in meanfield approximations,further fails to resolve molecular-scale interfacial dynamics under battery-operating conditions,limiting mechanistic insights.Herein,we established a multiscale theoretical calculation framework from single molecular characteristics to interfacial ion distribution,revealing the EDL’s structure and interactions between different ions and molecules,which helps us understand the parasitic processes in depth.Simulations demonstrate that water dipole and sulfate ion adsorption at the inner Helmholtz plane drives severe hydrogen evolution and by-product formation.Guided by these insights,we engineered a“water-poor and anion-expelled”EDL using 4,1’,6’-trichlorogalactosucrose(TGS)as an electrolyte additive.As a result,Zn||Zn symmetric cells with TGS exhibited stable cycling for over 4700 h under a current density of 1 mA cm^(−2),while NaV_(3)O_(8)·1.5H_(2)O-based full cells kept 90.4%of the initial specific capacity after 800 cycles at 5 A g^(−1).This work highlights the power of multiscale theoretical frameworks to unravel EDL complexities and guide high-performance ARZB design through integrated theory-experiment approaches.展开更多
To investigate the wind⁃induced vibration re⁃sponse characteristics of multispan double⁃layer cable photo⁃voltaic(PV)support structures,wind tunnel tests using an aeroelastic model were carried out to obtain the wind⁃...To investigate the wind⁃induced vibration re⁃sponse characteristics of multispan double⁃layer cable photo⁃voltaic(PV)support structures,wind tunnel tests using an aeroelastic model were carried out to obtain the wind⁃induced vibration response data of a three⁃span four⁃row double⁃layer cable PV support system.The wind⁃induced vibration characteristics with different PV module tilt angles,wind speeds,and wind direction angles were analyzed.The results showed that the double⁃layer cable large⁃span flexible PV support can effectively control the wind⁃induced vibration response and prevent the occur⁃rence of flutter under strong wind conditions.The maxi⁃mum value of the wind⁃induced vibration displacement of the flexible PV support system occurs in the windward first row.The upstream module has a significant shading effect on the downstream module,with a maximum effect of 23%.The most unfavorable wind direction angles of the structure are 0°and 180°.The change of the wind direction angle in the range of 0°to 30°has little effect on the wind vi⁃bration response.The change in the tilt angle of the PV modules has a greater impact on the wind vibration in the downwind direction and a smaller impact in the upwind di⁃rection.Special attention should be paid to the structural wind⁃resistant design of such systems in the upwind side span.展开更多
Cu_(2)ZnSn(S,Se)_(4)(CZTSSe)is considered to be the most potential light-absorbing material to replace CuInGaSe_(2)(CIGS),but the actual photoelectric conversion efficiency of such cells is much lower than that of CIG...Cu_(2)ZnSn(S,Se)_(4)(CZTSSe)is considered to be the most potential light-absorbing material to replace CuInGaSe_(2)(CIGS),but the actual photoelectric conversion efficiency of such cells is much lower than that of CIGS.One of the reasons is the high recombination rate of carriers at the interface.In this paper,in order to reduce the carrier recombination,a new solar cell structure with double absorber layers of Al-doped ZnO(AZO)/intrinsic(i)-ZnO/CdS/CZTS_(x1)Se_(1−x1)(CZTSSe_(1))/CZTS_(x2)Se_(1−x2)(CZTSSe_(2))/Mo was proposed,and the optimal conduction band offsets(CBOs)of CdS/CZTSSe_(1) interface and CZTSSe_(1)/CZTSSe_(2) interface were determined by changing the S ratio in CZTSSe_(1) and CZTSSe_(2),and the effect of thickness of CZTSSe_(1) on the performance of the cell was studied.The efficiencies of the optimized single and double absorber layers reached 17.97%and 23.4%,respectively.Compared with the single absorber layer structure,the proposed structure with double absorber layers has better cell performance.展开更多
The practical application of emerging rechargeable aqueous zinc(Zn)batteries is challenged by the poor reversibility and cycling stability of Zn anodes,primarily due to parasitic side reactions.While numerous strategi...The practical application of emerging rechargeable aqueous zinc(Zn)batteries is challenged by the poor reversibility and cycling stability of Zn anodes,primarily due to parasitic side reactions.While numerous strategies have been proposed,balancing the suppression of side reactions with the maintenance of fast Zn plating/stripping kinetics remains a significant challenge.In this study,sucrose,a sterically-hindered organic molecule with abundant hydroxyl groups,is employed to suppress the side reactions and maintain the moderate kinetics of Zn plating/stripping by modulating the hydrogen bond network without altering the Zn^(2+)solvation structure.Its steric hindrance effect further impedes the lateral diffusion of Zn atoms on the electrode surface within the electric double layer,effectively mitigating dendrite growth and stabilizing the electrodeposition process.Consequently,the formulated Suc/ZnSO_(4)electrolyte achieves a remarkably Coulombic efficiency of 99.90% over 2600 cycles at 3 mA cm^(-2)for 1 mAh cm^(-2)in Zn‖Cu cells.The enhanced Zn anode reversibility leads to excellent cycling stability in Zn‖LiFePO_(4)cells and Zn‖β-MnO_(2)cells.This study underscores the potential of sterically-hindered organic molecule strategies to enhance Zn anode stability while maintaining favorable Zn deposition/stripping dynamics in aqueous Zn batteries.展开更多
The poor oxidation stability of ether-based solvents has long been a major challenge limiting their practical application.To enhance the oxidative stability of ether-based electrolytes,the physicochemical properties o...The poor oxidation stability of ether-based solvents has long been a major challenge limiting their practical application.To enhance the oxidative stability of ether-based electrolytes,the physicochemical properties of various glycol dimethyl ethers are screened,and diglyme(G2)is selected as the sole solvent for the electrolyte.Lithium bis(fluorosulfonyl)imide(LiFSI),a highly dissociative salt,is used as the primary salt;while lithium nitrate(LiNO_(3))and lithium difluorophosphate(LiDFP),which have small ionic sizes and strong binding energies,are added as secondary salts.The resulting electrolyte can modulate the electric double layer structure by NO_(3)^(-) and DFP^(-) on the cathode side,leading to an increased Liþconcentration that is originally repelled by the cathode.Additionally,the oxidation stability of the electrolyte is improved and the formed electrode-electrolyte interphase is more uniform and stable,thereby enhancing the electrochemical performance of the cells.As a result,cells assembled with a total of 1 M ternary lithium salts in G2 solvent can operate at high voltage of 4.4 V.The LijjNCM811 cells maintain 80.2%capacity retention after 270 cycles at room temperature,with an average Coulombic efficiency of 99.5%,and exhibit 88.4%capacity retention after 200 cycles at -30℃.展开更多
Recent advances in two-dimensional layered systems have greatly enriched electronic transport studies, particularly in inter-layer Coulomb drag research. Here, systematic transport measurements were conducted in graph...Recent advances in two-dimensional layered systems have greatly enriched electronic transport studies, particularly in inter-layer Coulomb drag research. Here, systematic transport measurements were conducted in graphene-based electronic double-layer structures, revealing giant yet reproducible drag fluctuations at cryogenic temperatures. These fluctuations' characteristics, including amplitude and peak/valley spacing, are mainly determined by the drag layer's carrier dynamics rather than the drive layer's, resulting in violation of the Onsager reciprocity relation. Notably, the drag fluctuations remain observable up to 35 K, far exceeding universal conductance fluctuations within individual layers. This suggests enhanced phase coherence in inter-layer drag compared to single-layer transport, as further confirmed by quantitative analysis of auto-correlation fields of fluctuations under magnetic fields. Our findings provide new insights into quantum interference effects and their interplay with Coulomb interactions in solids. The observations of significant drag fluctuations could potentially help address chaotic signals between nearby components in nanoscale devices.展开更多
Rationally design the morphology and structure of electroactive nanomaterials is an effective approach to enhance the performance of aqueous batteries.Herein,we co-engineered the hollow architecture and interlayer spa...Rationally design the morphology and structure of electroactive nanomaterials is an effective approach to enhance the performance of aqueous batteries.Herein,we co-engineered the hollow architecture and interlayer spacing of layered double hydroxides(LDH)to achieve high electrochemical activity.The hierarchical hollow LDH was prepared from bimetallic zeolitic imidazolate frameworks(ZIF)by a facile cation exchange strategy.Zn and Cu elements were selected as the second metals incorporated in Co-ZIF.The characteristics of the corresponding derivatives were studied.Besides,the transformation mechanism of CoZn-ZIF into nanosheet-assembled hollow Co Zn Ni LDH(denoted as CoZnNi-OH)was systematically investigated.Importantly,the interlayer spacing of CoZnNi-OH expands due to Zn^(2+)incorporation.The prepared CoZnNi-OH offers large surface area,exposed active sites,and rapid mass transfer/diffusion rate,which lead to a significant enhancement in the specific capacitance,rate performance,and cycle stability of CoZnNi-OH electrode.In addition,the aqueous alkaline CoZnNi-OH//Zn showed a maximum energy density/power density of 0.924 m Wh/cm^(2),8.479 m W/cm^(2).This work not only raises an insightful strategy for regulating the morphology and interlayer spacing of LDH,but also provides a reference of designing hollow nickel-based nanomaterials for aqueous batteries.展开更多
Aqueous hybrid-ion batteries(AHBs)are a promising class of energy storage devices characterized by low cost,high safety,and high energy density.However,aqueous Cu-Al hybrid-ion batteries face challenges such as sluggi...Aqueous hybrid-ion batteries(AHBs)are a promising class of energy storage devices characterized by low cost,high safety,and high energy density.However,aqueous Cu-Al hybrid-ion batteries face challenges such as sluggish reaction kinetics and severe structural collapse of cathode materials,which limit their practical application.Here,a high-performance aqueous Cu-Al hybrid-ion battery is developed using aluminum pre-inserted Cu_(9)S_(5)(Al-Cu_(9)S_(5))as the cathode material,derived from CuAl-layered double hydroxide(CuAl-LDH).The Al^(3+)pre-intercalation strategy narrows the band gap,enhancing electron transport and improving electrochemical kinetics.The battery exhibits excellent rate performance(463 and 408 mA h g^(-1)at current densities of 500 and 1000 mA g^(-1),respectively)and good cycle stability(with a capacity retention ratio of 81% after 300 cycles at a current density of 1000 mA g^(-1)).Its performance surpasses that of most reported Al-ion batteries.Ex situ characterization and density functional theory(DFT)calculations reveal that the pre-intercalated Al^(3+)in Al-Cu9S5participates in the reversible embedding/removal of Al ions during charge/discharge processes.These findings provide valuable insights for designing pre-intercalated cathodes in aqueous Cu-Al hybrid-ion batteries with stable cycle life.展开更多
Layered double hydroxides(LDHs)are potential cathode materials for aqueous magnesium-ion batteries(AMIBs).However,the low capacity and sluggish kinetics significantly limit their electrochemical performance in AMIBs.H...Layered double hydroxides(LDHs)are potential cathode materials for aqueous magnesium-ion batteries(AMIBs).However,the low capacity and sluggish kinetics significantly limit their electrochemical performance in AMIBs.Herein,we find that oxygen vacancies can significantly boost the capacity,electrochemical kinetics,and structure stability of LDHs.The corresponding structure-performance relationship and energy storage mechanism are elaborated through exhaustive in/ex-situ experimental characterizations and density functional theory(DFT)calculations.Specially,in-situ Raman and DFT calculations reveal that oxygen vacancies elevate orbital energy of O 2p and electron density of O atoms,thereby enhancing the orbital hybridization of O 2p with Ni/Co 3d.This facilitates electron transfer between O and adjacent Ni/Co atoms and improves the covalency of Ni–O and Co–O bonds,which activates Ni/Co atoms to release more capacity and stabilizes the Ov-NiCo-LDH structure.Moreover,the distribution of relaxation times(DRT)and molecular dynamics(MD)simulations disclose that the enhanced d-p orbital hybridization optimizes the electronic structure of Ov-NiCo-LDH,which distinctly reduces the diffusion energy barriers of Mg^(2+)and improves the charge transfer kinetics of Ov-NiCo-LDH.Consequently,the assembled Ov-NiCo-LDH//active carbon(AC)and Ov-NiCo-LDH//perylenediimide(PTCDI)AMIBs can both deliver high specific discharge capacity(182.7 and 59.4 mAh g^(−1)at 0.5 A g^(−1),respectively)and long-term cycling stability(85.4%and 89.0%of capacity retentions after 2500 and 2400 cycles at 1.0 A g^(−1),respectively).In addition,the practical prospects for Ov-NiCo-LDH-based AMIBs have been demonstrated in different application scenarios.This work not only provides an effective strategy for obtaining high-performance cathodes of AMIBs,but also fundamentally elucidates the inherent mechanisms.展开更多
Layered double hydroxides(LDHs)have emerged as a promising class of photocatalysts with remarkable properties for diverse energy and environmental-related applications.This review offers insights into recent advances ...Layered double hydroxides(LDHs)have emerged as a promising class of photocatalysts with remarkable properties for diverse energy and environmental-related applications.This review offers insights into recent advances in LDH-based photocatalysts,focusing on their synthesis methods,structural properties,and photocatalytic performance.The unique structure of LDHs,characterized by positively charged metal hydroxide layers and intercalated anions,presents opportunities for tailoring their properties to enhance photocatalytic performance.The mechanisms for pollutant degradation,water splitting,and CO_(2) reduction are discussed,along with strategies to enhance the efficacy and stability of LDH-based photocatalysts.The photocatalytic mechanisms of LDHs for various reactions,including pollutant degradation,water splitting,and CO_(2) reduction,are discussed.Additionally,strategies for enriching the efficacy and stability of LDH-based photocatalysts are explored.This review underscores the significant potential of LDHs as versatile and efficient photocatalysts for addressing current environmental and energy challenges.展开更多
To achieve palm oil conversion along with a high yield of long‐chain alkane,a series of NiFe layered double oxide catalysts were prepared and employed in the deoxygenation of palm oil.The layered structure of these c...To achieve palm oil conversion along with a high yield of long‐chain alkane,a series of NiFe layered double oxide catalysts were prepared and employed in the deoxygenation of palm oil.The layered structure of these catalysts was confirmed by XRD and SEM analyses,and Ni and Fe species existed primarily in the forms of Ni^(2+)and Fe^(3+),respectively.It was found that Ni/Fe molar ratio influenced the H_(2)reducibility and surface properties of NiFe catalysts.Specifically,Ni_(2)Fe‐LDO and Ni_(3)Fe‐LDO exhibited higher reducibility under H_(2)atmosphere.Moreover,the Ni_(2)Fe‐LDO catalyst contained a higher concentration of surface oxygen species(Osurf).Deoxygenation results demonstrated that the Ni_(2)Fe‐LDO catalyst achieved superior palm oil conversion,higher liquid product yield and enhanced selectivity toward C_(15)–C_(18)hydrocarbons compared to other catalysts.This improved performance was attributed to its higher hydrogen dissociation activity and enhanced adsorption capacity for palm oil molecules.Furthermore,reaction condition studies revealed that palm oil was completely converted,yielding 86.8%liquid product with 81.8%selectivity of C_(15)–C_(18)hydrocarbons at 350℃under 7 MPa H_(2)pressure.This finding provides an insight into the development of efficient catalysts for the deoxygenation of fatty compounds to biofuels.展开更多
Electrically driven water splitting is an efficient method for green hydrogen production;however,its practical application is substantially constrained by the kinetically sluggish anodic oxygen evolution reaction(OER)...Electrically driven water splitting is an efficient method for green hydrogen production;however,its practical application is substantially constrained by the kinetically sluggish anodic oxygen evolution reaction(OER).Ruthenium(Ru)and its oxides are widely recognized as highly active OER catalysts.Although Ru is significantly cheaper than iridium(Ir),further reducing its content remains desirable.Herein,atomically dispersed Ru is doped into iron-nickel layered double hydroxides(Ru-FeNi-LDH)to decrease the Ru usage.We found that the Ru doping limit is roughly 9 wt%,and the Ru doping content significantly alters the OER kinetics-note that the high Ru concentration remarkably damages the Ru-FeNi-LDH structure and leads to agglomeration formation.By optimizing the Ru doping content to 3.3 wt%,the Ru-FeNi-LDH presents a low overpotential of 230 mV to reach a current density of 10 mA cm^(-2) in 1 M KOH,which is far better than the reference FeNi-LDH(280 mV)and RuO_(2)(350 mV).In the overall water splitting test,the current density of 10 mA cm^(-2) can be reached at a low voltage of 1.52 V,with stable operation for 80 h.Interestingly,Ru and Fe form an asymmetric Ru-Fe dipole,which is likely doped together into the LDH because the content of Fe instead of Ni is dependent on Ru content in experimental results.The electron-deficient feature of the Ru-Fe dipole thus facilitates the OER process.This work demonstrates a dual-transition metal synergy,providing a design strategy for OER and related catalysts.展开更多
ZnO/NiO/ZnAl2O4 mixed-metal oxides were successfully synthesized through a hydrotalcite-like precursor route, in which appropriate amounts of metal salts solutions were mixed to obtain a new series of ZnNiAl layered d...ZnO/NiO/ZnAl2O4 mixed-metal oxides were successfully synthesized through a hydrotalcite-like precursor route, in which appropriate amounts of metal salts solutions were mixed to obtain a new series of ZnNiAl layered double hydroxides（LDHs） as precursors, followed by calcination under different temperatures. The as-obtained samples were characterized by SEM, HRTEM, TEM, XRD, BET, TG-DTA, and UV-Vis spectra techniques. The photocatalytic activities of the samples were evaluated by degradation of methyl orange（MO） under the simulated sunlight irradiation. The effects of Zn/Ni/Al mole ratio and calcination temperature on the composition, morphology and photocatalytic activity of the samples were investigated in detail. The results indicated that compared with ZnNiAl-LDHs, the mixed-metal oxide showed superior photocatalytic performance for the degradation of MO. A maximum of 97.3% photocatalytic decoloration rate within 60 min was achieved from the LDH with the Zn/Ni/Al mole ratio of 2：1：1 and the calcination temperature of 500 ℃, which much exceeded that of Degussa P25 under the same conditions. The possible mechanism of photocatalytic degradation over ZnO/NiO/ZnAl2O4 was discussed.展开更多
Layered double Mg-Fe-CO3 hydroxide （Mg-Fe-LDH） with a mole ratio of Mg to Fe of 3 was synthesized by coprecipitation method and calcined product Mg-Fe-CLDH was obtained by heating Mg-Fe-LDH at 500 ℃ for 6 h. The as...Layered double Mg-Fe-CO3 hydroxide （Mg-Fe-LDH） with a mole ratio of Mg to Fe of 3 was synthesized by coprecipitation method and calcined product Mg-Fe-CLDH was obtained by heating Mg-Fe-LDH at 500 ℃ for 6 h. The as prepared Mg-Fe-LDH and calcined Mg-Fe-CLDH were used for removal of glutamic acid （Glu） from aqueous solution, respectively. Batch studies were carried out to address various experimental parameters such as contact time, pH, initial glutamic acid （Glu） concentration, co-existing anions and temperature. Glu was removed effectively （99.9%） under the optimized experimental conditions with Mg-Fe-CLDH. The adsorption kinetics follows the Ho’s pseudo second-order model. Isotherms for adsorption with Mg-Fe-CLDH at different solution temperatures were well described using the Langmuir model with a good correlation coefficient. The intraparticle diffusion model fitted the data well, which suggests that the intraparticle diffusion is not only the rate-limiting step.展开更多
Mg/Al-CO3 layered double hydroxide （LDH2） with Mg（II）：Al（III） molar ratio of 2：1 was synthesized by co-precipitation method and its calcined product Mg2Al-CLDH（CLDH2） was prepared by heating Mg2Al-LDH at 773...Mg/Al-CO3 layered double hydroxide （LDH2） with Mg（II）：Al（III） molar ratio of 2：1 was synthesized by co-precipitation method and its calcined product Mg2Al-CLDH（CLDH2） was prepared by heating Mg2Al-LDH at 773 K for 6 h. Removal of vanadate anion （ 3-4VO ） from aqueous solution on CLDH2 was studied. Batch studies were carried out to address various experimental parameters such as Mg/Al molar ratio, adsorbent dosage, initial concentration of solution, contact time and temperature. Vanadate was removed effectively at the optimized experimental conditions. The adsorption kinetics data fitted the pseudo-first-order model. Isotherms for adsorption vanadate by CLDH2 at different solution temperatures were well described using the Langmuir and Freundlich equations, and the isotherm parameters were calculated using linear regression analysis. The adsorption data fitted the langmuir model with good values of the correlation coefficient （R2〉0.999）. The negative value ofΔGΘand the positive value ofΔHΘindicate that the adsorption processes are spontaneous endothermic in nature. The mechanism of adsorption suggests that the surface adsorption is the main process.展开更多
Colored layered double hydroxides （LDHs） can be synthesized by introducing colored cations such as Fe^3＋ and Cr^3 ＋, which call be used as thermal stabilizers for polyvinyl chloride （PVC）. The yellowish Mg/Fe an...Colored layered double hydroxides （LDHs） can be synthesized by introducing colored cations such as Fe^3＋ and Cr^3 ＋, which call be used as thermal stabilizers for polyvinyl chloride （PVC）. The yellowish Mg/Fe and bluish Mg/Cr LDHs are prepared by the co-precipitation method. The results show that the MgsCr_ CO3 and Mg3Fe_ CO3 colored layered double hydroxides can stabilize PVC for more than 30 min under the thermal aging temperature of 180 ℃. The preparation can use cheap Mg（OH） 2 instead of MgCl2, which produces a much smaller amount of the by-product NH4Cl. It is known that NH4Cl is a cheap fertilizer that is difficult to sell; therefore, the preparation is much greener and more economic than the one using magnesium salt.展开更多
Layered double hydroxides（LDHs） as a class of anionic clays have extensive applications due to their unique structures. Nowadays, the emphasis is laid on the development of LDH coatings for corrosion resistance and ...Layered double hydroxides（LDHs） as a class of anionic clays have extensive applications due to their unique structures. Nowadays, the emphasis is laid on the development of LDH coatings for corrosion resistance and medical applications. Thus, this review highlights synthetic methods of LDH coatings and LDH-based composite coatings on magnesium alloys. Special attention is focused on self-healing,biocompatible and self-cleaning LDH-based composite coatings on magnesium alloys.展开更多
Layered double hydroxide(LDH) has been widely developed in the field of corrosion and protection in recent years based on its unique characteristics including anion capacity, anion exchange ability, structure memory e...Layered double hydroxide(LDH) has been widely developed in the field of corrosion and protection in recent years based on its unique characteristics including anion capacity, anion exchange ability, structure memory effect, and barrier resistance. This paper comprehensively reviews recent work on the preparations, properties of LDH in the forms of powder and film and their applications in different environments in corrosion and protection. Some novel perspectives are also proposed at the end of the review for future research in corrosion and protection field.展开更多
To further enhance the corrosion resistance of the porous micro-arc oxidation(MAO) ceramic layers on AZ31 magnesium alloy, superhydrophobic Mg-Al layered double hydroxide(LDH) coating was fabricated on MAO-coated AZ31...To further enhance the corrosion resistance of the porous micro-arc oxidation(MAO) ceramic layers on AZ31 magnesium alloy, superhydrophobic Mg-Al layered double hydroxide(LDH) coating was fabricated on MAO-coated AZ31 alloy by using in-situ growth method followed by surface modification with stearic acid. The characteristics of different coatings were investigated by XRD, SEM and EDS. The effect of the hydrothermal treatment time on the formation of the LDH coatings was studied. The results demonstrated that the micro-pores and cracks of MAO coating were gradually sealed via in-situ growing LDH with prolonging hydrothermal treating time. Electrochemical measurement displayed that the lowest corrosion current density, the most positive corrosion potential and the highest impedance modulus were observed for superhydrophobic LDH/MAO coating compared with those of MAO coating and LDH/MAO coating. Immersion experiment proved that the superhydrophobic LDH/MAO coating with the active anti-corrosion capability significantly enhanced the long-term corrosion protection for MAO coated alloy.展开更多
The mesoporous Cu/Mg/Fe layered double hydroxide（Cu/Mg/Fe-LDH） with carbonate intercalation was synthesized and used for the removal of arsenate from aqueous solutions.The Cu/Mg/Fe-LDH was characterized by Fourier t...The mesoporous Cu/Mg/Fe layered double hydroxide（Cu/Mg/Fe-LDH） with carbonate intercalation was synthesized and used for the removal of arsenate from aqueous solutions.The Cu/Mg/Fe-LDH was characterized by Fourier transform infrared spectrometry,X-ray diffraction crystallography,scanning electron microscopy,X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller.Effects of various physico-chemical parameters such as pH,adsorbent dosage,contact time and initial arsenate concentration on the adsorption of arsenate onto Cu/Mg/Fe-LDH were investigated.Results showed that it was efficient for the removal of arsenate,and the removal efficiency of arsenate increased with the increment of the adsorbent dosage,while the arsenate adsorption capacity decreased with increase of initial pH from 3 to 11.The adsorption isotherms can be well described by the Langmuir model with R 2 〉 0.99.Its adsorption kinetics followed the pseudo second-order kinetic model.Coexisting ions such as HPO42-,CO32-,SO42and NO3could compete with arsenate for adsorption sites on the Cu/Mg/Fe-LDH.The adsorption of arsenate on the adsorbent can be mainly attributed to the ion exchange process.It was found that the synthesized Cu/Mg/Fe-LDH can reduce the arsenate concentration down to a final level of 〈 10 μg/L under the experimental conditions,and makes it a potential material for the decontamination of arsenate polluted water.展开更多
基金supported by the National Natural Science Foundation of China(52471240)the Natural Science Foundation of Zhejiang Province(LZ23B030003)+2 种基金the Fundamental Research Funds for the Central Universities(226-2024-00075)support from the Engineering and Physical Sciences Research Council(EPSRC,UK)RiR grant-RIR18221018-1EU COST CA23155。
文摘The electric double layer(EDL)at the electrochemical interface is crucial for ion transport,charge transfer,and surface reactions in aqueous rechargeable zinc batteries(ARZBs).However,Zn anodes routinely encounter persistent dendrite growth and parasitic reactions,driven by the inhomogeneous charge distribution and water-dominated environment within the EDL.Compounding this,classical EDL theory,rooted in meanfield approximations,further fails to resolve molecular-scale interfacial dynamics under battery-operating conditions,limiting mechanistic insights.Herein,we established a multiscale theoretical calculation framework from single molecular characteristics to interfacial ion distribution,revealing the EDL’s structure and interactions between different ions and molecules,which helps us understand the parasitic processes in depth.Simulations demonstrate that water dipole and sulfate ion adsorption at the inner Helmholtz plane drives severe hydrogen evolution and by-product formation.Guided by these insights,we engineered a“water-poor and anion-expelled”EDL using 4,1’,6’-trichlorogalactosucrose(TGS)as an electrolyte additive.As a result,Zn||Zn symmetric cells with TGS exhibited stable cycling for over 4700 h under a current density of 1 mA cm^(−2),while NaV_(3)O_(8)·1.5H_(2)O-based full cells kept 90.4%of the initial specific capacity after 800 cycles at 5 A g^(−1).This work highlights the power of multiscale theoretical frameworks to unravel EDL complexities and guide high-performance ARZB design through integrated theory-experiment approaches.
基金The National Natural Science Foundation of China(No.52338011).
文摘To investigate the wind⁃induced vibration re⁃sponse characteristics of multispan double⁃layer cable photo⁃voltaic(PV)support structures,wind tunnel tests using an aeroelastic model were carried out to obtain the wind⁃induced vibration response data of a three⁃span four⁃row double⁃layer cable PV support system.The wind⁃induced vibration characteristics with different PV module tilt angles,wind speeds,and wind direction angles were analyzed.The results showed that the double⁃layer cable large⁃span flexible PV support can effectively control the wind⁃induced vibration response and prevent the occur⁃rence of flutter under strong wind conditions.The maxi⁃mum value of the wind⁃induced vibration displacement of the flexible PV support system occurs in the windward first row.The upstream module has a significant shading effect on the downstream module,with a maximum effect of 23%.The most unfavorable wind direction angles of the structure are 0°and 180°.The change of the wind direction angle in the range of 0°to 30°has little effect on the wind vi⁃bration response.The change in the tilt angle of the PV modules has a greater impact on the wind vibration in the downwind direction and a smaller impact in the upwind di⁃rection.Special attention should be paid to the structural wind⁃resistant design of such systems in the upwind side span.
基金supported by the Science and Technology Innovation Development Program(No.70304901).
文摘Cu_(2)ZnSn(S,Se)_(4)(CZTSSe)is considered to be the most potential light-absorbing material to replace CuInGaSe_(2)(CIGS),but the actual photoelectric conversion efficiency of such cells is much lower than that of CIGS.One of the reasons is the high recombination rate of carriers at the interface.In this paper,in order to reduce the carrier recombination,a new solar cell structure with double absorber layers of Al-doped ZnO(AZO)/intrinsic(i)-ZnO/CdS/CZTS_(x1)Se_(1−x1)(CZTSSe_(1))/CZTS_(x2)Se_(1−x2)(CZTSSe_(2))/Mo was proposed,and the optimal conduction band offsets(CBOs)of CdS/CZTSSe_(1) interface and CZTSSe_(1)/CZTSSe_(2) interface were determined by changing the S ratio in CZTSSe_(1) and CZTSSe_(2),and the effect of thickness of CZTSSe_(1) on the performance of the cell was studied.The efficiencies of the optimized single and double absorber layers reached 17.97%and 23.4%,respectively.Compared with the single absorber layer structure,the proposed structure with double absorber layers has better cell performance.
基金funded by the National Key Research and Development Program of China(2022YFB2404500)the Shenzhen Outstanding Talents Training Fund(01090100002)the National Natural Science Foundation of China(52201280)。
文摘The practical application of emerging rechargeable aqueous zinc(Zn)batteries is challenged by the poor reversibility and cycling stability of Zn anodes,primarily due to parasitic side reactions.While numerous strategies have been proposed,balancing the suppression of side reactions with the maintenance of fast Zn plating/stripping kinetics remains a significant challenge.In this study,sucrose,a sterically-hindered organic molecule with abundant hydroxyl groups,is employed to suppress the side reactions and maintain the moderate kinetics of Zn plating/stripping by modulating the hydrogen bond network without altering the Zn^(2+)solvation structure.Its steric hindrance effect further impedes the lateral diffusion of Zn atoms on the electrode surface within the electric double layer,effectively mitigating dendrite growth and stabilizing the electrodeposition process.Consequently,the formulated Suc/ZnSO_(4)electrolyte achieves a remarkably Coulombic efficiency of 99.90% over 2600 cycles at 3 mA cm^(-2)for 1 mAh cm^(-2)in Zn‖Cu cells.The enhanced Zn anode reversibility leads to excellent cycling stability in Zn‖LiFePO_(4)cells and Zn‖β-MnO_(2)cells.This study underscores the potential of sterically-hindered organic molecule strategies to enhance Zn anode stability while maintaining favorable Zn deposition/stripping dynamics in aqueous Zn batteries.
文摘The poor oxidation stability of ether-based solvents has long been a major challenge limiting their practical application.To enhance the oxidative stability of ether-based electrolytes,the physicochemical properties of various glycol dimethyl ethers are screened,and diglyme(G2)is selected as the sole solvent for the electrolyte.Lithium bis(fluorosulfonyl)imide(LiFSI),a highly dissociative salt,is used as the primary salt;while lithium nitrate(LiNO_(3))and lithium difluorophosphate(LiDFP),which have small ionic sizes and strong binding energies,are added as secondary salts.The resulting electrolyte can modulate the electric double layer structure by NO_(3)^(-) and DFP^(-) on the cathode side,leading to an increased Liþconcentration that is originally repelled by the cathode.Additionally,the oxidation stability of the electrolyte is improved and the formed electrode-electrolyte interphase is more uniform and stable,thereby enhancing the electrochemical performance of the cells.As a result,cells assembled with a total of 1 M ternary lithium salts in G2 solvent can operate at high voltage of 4.4 V.The LijjNCM811 cells maintain 80.2%capacity retention after 270 cycles at room temperature,with an average Coulombic efficiency of 99.5%,and exhibit 88.4%capacity retention after 200 cycles at -30℃.
基金supported by the National Natural Science Foundation of China (Grant Nos.12474051 and 92165201)the Chinese Academy of Sciences Project for Young Scientists in Basic Research (Grant No.YSBR-046)+1 种基金the National Key Research and Development Program of China (Grant No.2023YFA1406300)the Anhui Provincial Natural Science Foundation (Grant Nos.2308085J11 and2308085QA14)。
文摘Recent advances in two-dimensional layered systems have greatly enriched electronic transport studies, particularly in inter-layer Coulomb drag research. Here, systematic transport measurements were conducted in graphene-based electronic double-layer structures, revealing giant yet reproducible drag fluctuations at cryogenic temperatures. These fluctuations' characteristics, including amplitude and peak/valley spacing, are mainly determined by the drag layer's carrier dynamics rather than the drive layer's, resulting in violation of the Onsager reciprocity relation. Notably, the drag fluctuations remain observable up to 35 K, far exceeding universal conductance fluctuations within individual layers. This suggests enhanced phase coherence in inter-layer drag compared to single-layer transport, as further confirmed by quantitative analysis of auto-correlation fields of fluctuations under magnetic fields. Our findings provide new insights into quantum interference effects and their interplay with Coulomb interactions in solids. The observations of significant drag fluctuations could potentially help address chaotic signals between nearby components in nanoscale devices.
基金supported by the National Natural Science Foundation of China(Nos.52371240,U1904215)Natural Science Foundation of Jiangsu Province(No.BK20200044)Changjiang scholars’program of the Ministry of Education(No.Q2018270)。
文摘Rationally design the morphology and structure of electroactive nanomaterials is an effective approach to enhance the performance of aqueous batteries.Herein,we co-engineered the hollow architecture and interlayer spacing of layered double hydroxides(LDH)to achieve high electrochemical activity.The hierarchical hollow LDH was prepared from bimetallic zeolitic imidazolate frameworks(ZIF)by a facile cation exchange strategy.Zn and Cu elements were selected as the second metals incorporated in Co-ZIF.The characteristics of the corresponding derivatives were studied.Besides,the transformation mechanism of CoZn-ZIF into nanosheet-assembled hollow Co Zn Ni LDH(denoted as CoZnNi-OH)was systematically investigated.Importantly,the interlayer spacing of CoZnNi-OH expands due to Zn^(2+)incorporation.The prepared CoZnNi-OH offers large surface area,exposed active sites,and rapid mass transfer/diffusion rate,which lead to a significant enhancement in the specific capacitance,rate performance,and cycle stability of CoZnNi-OH electrode.In addition,the aqueous alkaline CoZnNi-OH//Zn showed a maximum energy density/power density of 0.924 m Wh/cm^(2),8.479 m W/cm^(2).This work not only raises an insightful strategy for regulating the morphology and interlayer spacing of LDH,but also provides a reference of designing hollow nickel-based nanomaterials for aqueous batteries.
基金supported by the National Natural Science Foundation of China(Nos.22278020 and 2177060378)the Fundamental Research Funds for the Central Universities(Nos.12060093063 and XK1803-05)the Program for Changjiang Scholars and Innovative Research Teams in University(No.IRT1205)。
文摘Aqueous hybrid-ion batteries(AHBs)are a promising class of energy storage devices characterized by low cost,high safety,and high energy density.However,aqueous Cu-Al hybrid-ion batteries face challenges such as sluggish reaction kinetics and severe structural collapse of cathode materials,which limit their practical application.Here,a high-performance aqueous Cu-Al hybrid-ion battery is developed using aluminum pre-inserted Cu_(9)S_(5)(Al-Cu_(9)S_(5))as the cathode material,derived from CuAl-layered double hydroxide(CuAl-LDH).The Al^(3+)pre-intercalation strategy narrows the band gap,enhancing electron transport and improving electrochemical kinetics.The battery exhibits excellent rate performance(463 and 408 mA h g^(-1)at current densities of 500 and 1000 mA g^(-1),respectively)and good cycle stability(with a capacity retention ratio of 81% after 300 cycles at a current density of 1000 mA g^(-1)).Its performance surpasses that of most reported Al-ion batteries.Ex situ characterization and density functional theory(DFT)calculations reveal that the pre-intercalated Al^(3+)in Al-Cu9S5participates in the reversible embedding/removal of Al ions during charge/discharge processes.These findings provide valuable insights for designing pre-intercalated cathodes in aqueous Cu-Al hybrid-ion batteries with stable cycle life.
基金financial support of the National Natural Science Foundation of China (22379063)
文摘Layered double hydroxides(LDHs)are potential cathode materials for aqueous magnesium-ion batteries(AMIBs).However,the low capacity and sluggish kinetics significantly limit their electrochemical performance in AMIBs.Herein,we find that oxygen vacancies can significantly boost the capacity,electrochemical kinetics,and structure stability of LDHs.The corresponding structure-performance relationship and energy storage mechanism are elaborated through exhaustive in/ex-situ experimental characterizations and density functional theory(DFT)calculations.Specially,in-situ Raman and DFT calculations reveal that oxygen vacancies elevate orbital energy of O 2p and electron density of O atoms,thereby enhancing the orbital hybridization of O 2p with Ni/Co 3d.This facilitates electron transfer between O and adjacent Ni/Co atoms and improves the covalency of Ni–O and Co–O bonds,which activates Ni/Co atoms to release more capacity and stabilizes the Ov-NiCo-LDH structure.Moreover,the distribution of relaxation times(DRT)and molecular dynamics(MD)simulations disclose that the enhanced d-p orbital hybridization optimizes the electronic structure of Ov-NiCo-LDH,which distinctly reduces the diffusion energy barriers of Mg^(2+)and improves the charge transfer kinetics of Ov-NiCo-LDH.Consequently,the assembled Ov-NiCo-LDH//active carbon(AC)and Ov-NiCo-LDH//perylenediimide(PTCDI)AMIBs can both deliver high specific discharge capacity(182.7 and 59.4 mAh g^(−1)at 0.5 A g^(−1),respectively)and long-term cycling stability(85.4%and 89.0%of capacity retentions after 2500 and 2400 cycles at 1.0 A g^(−1),respectively).In addition,the practical prospects for Ov-NiCo-LDH-based AMIBs have been demonstrated in different application scenarios.This work not only provides an effective strategy for obtaining high-performance cathodes of AMIBs,but also fundamentally elucidates the inherent mechanisms.
基金supported by Karpagam Academy of Higher Education,India(No.KAHE/R-Acad/A1/Seed Money/024/2981)。
文摘Layered double hydroxides(LDHs)have emerged as a promising class of photocatalysts with remarkable properties for diverse energy and environmental-related applications.This review offers insights into recent advances in LDH-based photocatalysts,focusing on their synthesis methods,structural properties,and photocatalytic performance.The unique structure of LDHs,characterized by positively charged metal hydroxide layers and intercalated anions,presents opportunities for tailoring their properties to enhance photocatalytic performance.The mechanisms for pollutant degradation,water splitting,and CO_(2) reduction are discussed,along with strategies to enhance the efficacy and stability of LDH-based photocatalysts.The photocatalytic mechanisms of LDHs for various reactions,including pollutant degradation,water splitting,and CO_(2) reduction,are discussed.Additionally,strategies for enriching the efficacy and stability of LDH-based photocatalysts are explored.This review underscores the significant potential of LDHs as versatile and efficient photocatalysts for addressing current environmental and energy challenges.
基金National Natural Science Foundation of China(22278084)State Key Laboratory of Heavy Oil Processing(SKLHOP202402003)for financing this research.
文摘To achieve palm oil conversion along with a high yield of long‐chain alkane,a series of NiFe layered double oxide catalysts were prepared and employed in the deoxygenation of palm oil.The layered structure of these catalysts was confirmed by XRD and SEM analyses,and Ni and Fe species existed primarily in the forms of Ni^(2+)and Fe^(3+),respectively.It was found that Ni/Fe molar ratio influenced the H_(2)reducibility and surface properties of NiFe catalysts.Specifically,Ni_(2)Fe‐LDO and Ni_(3)Fe‐LDO exhibited higher reducibility under H_(2)atmosphere.Moreover,the Ni_(2)Fe‐LDO catalyst contained a higher concentration of surface oxygen species(Osurf).Deoxygenation results demonstrated that the Ni_(2)Fe‐LDO catalyst achieved superior palm oil conversion,higher liquid product yield and enhanced selectivity toward C_(15)–C_(18)hydrocarbons compared to other catalysts.This improved performance was attributed to its higher hydrogen dissociation activity and enhanced adsorption capacity for palm oil molecules.Furthermore,reaction condition studies revealed that palm oil was completely converted,yielding 86.8%liquid product with 81.8%selectivity of C_(15)–C_(18)hydrocarbons at 350℃under 7 MPa H_(2)pressure.This finding provides an insight into the development of efficient catalysts for the deoxygenation of fatty compounds to biofuels.
基金supported by Guangdong Basic and Applied Basic Research Foundation(2022B1515120079)Tertiary Education Scientific research project of Guangzhou Municipal Education Bureau(2024312194)+1 种基金the Science and Technology Projects in Guangzhou(2024A03J0308)the Outstanding Youth Project of Natural Science Foundation of Guangdong Province(2022B1515020020).
文摘Electrically driven water splitting is an efficient method for green hydrogen production;however,its practical application is substantially constrained by the kinetically sluggish anodic oxygen evolution reaction(OER).Ruthenium(Ru)and its oxides are widely recognized as highly active OER catalysts.Although Ru is significantly cheaper than iridium(Ir),further reducing its content remains desirable.Herein,atomically dispersed Ru is doped into iron-nickel layered double hydroxides(Ru-FeNi-LDH)to decrease the Ru usage.We found that the Ru doping limit is roughly 9 wt%,and the Ru doping content significantly alters the OER kinetics-note that the high Ru concentration remarkably damages the Ru-FeNi-LDH structure and leads to agglomeration formation.By optimizing the Ru doping content to 3.3 wt%,the Ru-FeNi-LDH presents a low overpotential of 230 mV to reach a current density of 10 mA cm^(-2) in 1 M KOH,which is far better than the reference FeNi-LDH(280 mV)and RuO_(2)(350 mV).In the overall water splitting test,the current density of 10 mA cm^(-2) can be reached at a low voltage of 1.52 V,with stable operation for 80 h.Interestingly,Ru and Fe form an asymmetric Ru-Fe dipole,which is likely doped together into the LDH because the content of Fe instead of Ni is dependent on Ru content in experimental results.The electron-deficient feature of the Ru-Fe dipole thus facilitates the OER process.This work demonstrates a dual-transition metal synergy,providing a design strategy for OER and related catalysts.
基金Project(21306041)supported by the National Natural Science Young Foundation of ChinaProject(21271071)supported by the National Natural Science Foundation of ChinaProject(15A076)supported by the Scientific Research Foundation of Hunan Provincial Education Department of China
文摘ZnO/NiO/ZnAl2O4 mixed-metal oxides were successfully synthesized through a hydrotalcite-like precursor route, in which appropriate amounts of metal salts solutions were mixed to obtain a new series of ZnNiAl layered double hydroxides（LDHs） as precursors, followed by calcination under different temperatures. The as-obtained samples were characterized by SEM, HRTEM, TEM, XRD, BET, TG-DTA, and UV-Vis spectra techniques. The photocatalytic activities of the samples were evaluated by degradation of methyl orange（MO） under the simulated sunlight irradiation. The effects of Zn/Ni/Al mole ratio and calcination temperature on the composition, morphology and photocatalytic activity of the samples were investigated in detail. The results indicated that compared with ZnNiAl-LDHs, the mixed-metal oxide showed superior photocatalytic performance for the degradation of MO. A maximum of 97.3% photocatalytic decoloration rate within 60 min was achieved from the LDH with the Zn/Ni/Al mole ratio of 2：1：1 and the calcination temperature of 500 ℃, which much exceeded that of Degussa P25 under the same conditions. The possible mechanism of photocatalytic degradation over ZnO/NiO/ZnAl2O4 was discussed.
基金Project(21176263)supported by the National Natural Science Foundation of China
文摘Layered double Mg-Fe-CO3 hydroxide （Mg-Fe-LDH） with a mole ratio of Mg to Fe of 3 was synthesized by coprecipitation method and calcined product Mg-Fe-CLDH was obtained by heating Mg-Fe-LDH at 500 ℃ for 6 h. The as prepared Mg-Fe-LDH and calcined Mg-Fe-CLDH were used for removal of glutamic acid （Glu） from aqueous solution, respectively. Batch studies were carried out to address various experimental parameters such as contact time, pH, initial glutamic acid （Glu） concentration, co-existing anions and temperature. Glu was removed effectively （99.9%） under the optimized experimental conditions with Mg-Fe-CLDH. The adsorption kinetics follows the Ho’s pseudo second-order model. Isotherms for adsorption with Mg-Fe-CLDH at different solution temperatures were well described using the Langmuir model with a good correlation coefficient. The intraparticle diffusion model fitted the data well, which suggests that the intraparticle diffusion is not only the rate-limiting step.
基金Projects(21176263,21175155)supported by the National Natural Science Foundation of China
文摘Mg/Al-CO3 layered double hydroxide （LDH2） with Mg（II）：Al（III） molar ratio of 2：1 was synthesized by co-precipitation method and its calcined product Mg2Al-CLDH（CLDH2） was prepared by heating Mg2Al-LDH at 773 K for 6 h. Removal of vanadate anion （ 3-4VO ） from aqueous solution on CLDH2 was studied. Batch studies were carried out to address various experimental parameters such as Mg/Al molar ratio, adsorbent dosage, initial concentration of solution, contact time and temperature. Vanadate was removed effectively at the optimized experimental conditions. The adsorption kinetics data fitted the pseudo-first-order model. Isotherms for adsorption vanadate by CLDH2 at different solution temperatures were well described using the Langmuir and Freundlich equations, and the isotherm parameters were calculated using linear regression analysis. The adsorption data fitted the langmuir model with good values of the correlation coefficient （R2〉0.999）. The negative value ofΔGΘand the positive value ofΔHΘindicate that the adsorption processes are spontaneous endothermic in nature. The mechanism of adsorption suggests that the surface adsorption is the main process.
基金The Fundamental Research Funds for the Central Universities,the Scientific Innovation Research of College Graduates in Jiangsu Province(No.CXLX12-0105)the Analysis and Test Fund of Southeast University(No.201226)
文摘Colored layered double hydroxides （LDHs） can be synthesized by introducing colored cations such as Fe^3＋ and Cr^3 ＋, which call be used as thermal stabilizers for polyvinyl chloride （PVC）. The yellowish Mg/Fe and bluish Mg/Cr LDHs are prepared by the co-precipitation method. The results show that the MgsCr_ CO3 and Mg3Fe_ CO3 colored layered double hydroxides can stabilize PVC for more than 30 min under the thermal aging temperature of 180 ℃. The preparation can use cheap Mg（OH） 2 instead of MgCl2, which produces a much smaller amount of the by-product NH4Cl. It is known that NH4Cl is a cheap fertilizer that is difficult to sell; therefore, the preparation is much greener and more economic than the one using magnesium salt.
基金supported by the National Natural Science Foundation of China (Grant Nos. 51601108, 51571134)the Natural Science Foundation of Shandong Province (Grant No. 2016ZRB01A62)the SDUST Research Fund (No. 2014TDJH104) and the Ministry-province jointly-constructed cultivation base for state key laboratory of Processing for non-ferrous metal and featured materials, "Guangxi Zhuang Autonomous Region"
文摘Layered double hydroxides（LDHs） as a class of anionic clays have extensive applications due to their unique structures. Nowadays, the emphasis is laid on the development of LDH coatings for corrosion resistance and medical applications. Thus, this review highlights synthetic methods of LDH coatings and LDH-based composite coatings on magnesium alloys. Special attention is focused on self-healing,biocompatible and self-cleaning LDH-based composite coatings on magnesium alloys.
基金financially supported by the State Key Project of Research and Development (No. 2016YFC1100300)the National Natural Science Foundation of China (No. 21203158, 21773199, and 21621091)。
文摘Layered double hydroxide(LDH) has been widely developed in the field of corrosion and protection in recent years based on its unique characteristics including anion capacity, anion exchange ability, structure memory effect, and barrier resistance. This paper comprehensively reviews recent work on the preparations, properties of LDH in the forms of powder and film and their applications in different environments in corrosion and protection. Some novel perspectives are also proposed at the end of the review for future research in corrosion and protection field.
基金Project(17JS083) supported by the Key Laboratory Program of Shaanxi Education Department,ChinaProject(2016JZ018) supported by the Key Program of Natural Science Research of Shaanxi Province,ChinaProject(51701162) supported by the National Natural Science Foundation of China
文摘To further enhance the corrosion resistance of the porous micro-arc oxidation(MAO) ceramic layers on AZ31 magnesium alloy, superhydrophobic Mg-Al layered double hydroxide(LDH) coating was fabricated on MAO-coated AZ31 alloy by using in-situ growth method followed by surface modification with stearic acid. The characteristics of different coatings were investigated by XRD, SEM and EDS. The effect of the hydrothermal treatment time on the formation of the LDH coatings was studied. The results demonstrated that the micro-pores and cracks of MAO coating were gradually sealed via in-situ growing LDH with prolonging hydrothermal treating time. Electrochemical measurement displayed that the lowest corrosion current density, the most positive corrosion potential and the highest impedance modulus were observed for superhydrophobic LDH/MAO coating compared with those of MAO coating and LDH/MAO coating. Immersion experiment proved that the superhydrophobic LDH/MAO coating with the active anti-corrosion capability significantly enhanced the long-term corrosion protection for MAO coated alloy.
基金supported by the National Natural Science Foundation of China (No. 41072173)the National High Technology Research and Development Program(863) of China (No. 2009AA062905)
文摘The mesoporous Cu/Mg/Fe layered double hydroxide（Cu/Mg/Fe-LDH） with carbonate intercalation was synthesized and used for the removal of arsenate from aqueous solutions.The Cu/Mg/Fe-LDH was characterized by Fourier transform infrared spectrometry,X-ray diffraction crystallography,scanning electron microscopy,X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller.Effects of various physico-chemical parameters such as pH,adsorbent dosage,contact time and initial arsenate concentration on the adsorption of arsenate onto Cu/Mg/Fe-LDH were investigated.Results showed that it was efficient for the removal of arsenate,and the removal efficiency of arsenate increased with the increment of the adsorbent dosage,while the arsenate adsorption capacity decreased with increase of initial pH from 3 to 11.The adsorption isotherms can be well described by the Langmuir model with R 2 〉 0.99.Its adsorption kinetics followed the pseudo second-order kinetic model.Coexisting ions such as HPO42-,CO32-,SO42and NO3could compete with arsenate for adsorption sites on the Cu/Mg/Fe-LDH.The adsorption of arsenate on the adsorbent can be mainly attributed to the ion exchange process.It was found that the synthesized Cu/Mg/Fe-LDH can reduce the arsenate concentration down to a final level of 〈 10 μg/L under the experimental conditions,and makes it a potential material for the decontamination of arsenate polluted water.
