The damage process of fractured rock mass showed that the fracture in rocks induced roof collapse in Yangchangwan Coal Mine, China. The rock mass was particularly weak and fractured. There occurred 6 large-scale dynam...The damage process of fractured rock mass showed that the fracture in rocks induced roof collapse in Yangchangwan Coal Mine, China. The rock mass was particularly weak and fractured. There occurred 6 large-scale dynamical roof falls in the excavation disturbed zone （EDZ） with the collapsing volume of 216 m^3. First, the field detailed geological environment, regional seismic dynamics, and dynamic instability of roadways were generally investigated. Second, the field multiple-index monitoring measurements for detecting the deep delamination of the roof, convergence deformation, bolt-cable load, acoustic emission （AE） characteristic parameters, total AE events, AE energy-releasing rate, rock mass fracture, and damage were arranged. Finally, according to the time-space-strength relations, a quantitative assessment of the influence of rock-mass damage on the dynamic roof instability was accomplished.展开更多
Due to the use of outdated mining technology or room and pillar mining process in small coal mines, the coal recovery ratio is only 10–25%. In many regions of China, the damage area caused by the small coal mines amo...Due to the use of outdated mining technology or room and pillar mining process in small coal mines, the coal recovery ratio is only 10–25%. In many regions of China, the damage area caused by the small coal mines amounted to nearly one hundred square kilometers. Therefore, special mining techniques must be taken to reclaim the wasted resource in disturbed coal areas. This paper focuses on the different mining methods by analyzing the longwall panel layout and abandoned gateroad(AG) distribution in the abandoned area of Cuijiazhai coal mine in northwestern China. On the basis of three-dimensional geological model, FLAC3 D numerical simulation was employed. The abutment pressure distribution was simulated when the panel face passed through the disturbed areas. The proper angle of the inclined face was analyzed when the panel face passed through the abandoned gateroads. The results show that the head end of the face should be 13–20 m ahead of the tail end. The pillars on both sides of abandoned gateroads had not been damaged at the same time, and no large-area stress concentration occured above the main roof.Therefore, the coal reserves of disturbed areas can be successfully recovered by using underground longwall mining.展开更多
Granular mixtures made of high-density pellets of bentonite are being evaluated as an alternative buffer material for waste isolation. Ease of handling is an often-mentioned advantage. The paper describes the experime...Granular mixtures made of high-density pellets of bentonite are being evaluated as an alternative buffer material for waste isolation. Ease of handling is an often-mentioned advantage. The paper describes the experimental program performed to characterize the hydro-mechanical （HM） behaviour of compacted pellet mixtures. Grain size distribution was adjusted to a maximum pellet size compatible with the specimen＇s dimensions. Dry densities of statically compacted specimens varied in most of the cases in the range from 1.3 to 1.5 Mg/m^3. Pellets had a very high dry density, close to 2 Mg/m^3. The outstanding characteristic of these mixtures is their discontinuous porosity. Pore sizes of the compacted pellets varied around 10 nm. However, the inter-pellet size of the pores was four to five orders of magnitude higher. This double porosity and the highly expansive nature of the pellets controlled all the hydraulic and mechanical properties of the mixture. Performed tests include infiltration tests using different water injection rates and mechanisms of water transfer （in liquid and vapour phases）, suction-controlled oedometer tests and swelling pressure tests. The interpretation of some performed tests required back analysis procedures using a hydro-mechanical （HM） computer code. Material response was studied within the framework of the elastoplastic constitutive model proposed by Alonso et al. （1990） （Barcelona basic model, BBM）. Parameters for the model were identified and also a set of hydraulic laws are necessary to perform coupled HM analysis. A large scale in-situ test （the ＂EB＂ test in Mont Terri, Switzerland） was described and analyzed. Rock barrier parameters were adjusted on the basis of available tests. The test excavation, barrier emplacement and forced hydration were simulated by means of the CODEBRIGHT program. The comparison between measurements and computed results include data on relative humidity in the rock and the buffer, swelling pressures and displacements.展开更多
In virtue of effect of N-S intensive ground stress and mining disturbance to +579E2EB_(1+2) mining site at Weihuliang Mine,the dip angle and section height is 65° and 52 m,respectively,the collapses happed freque...In virtue of effect of N-S intensive ground stress and mining disturbance to +579E2EB_(1+2) mining site at Weihuliang Mine,the dip angle and section height is 65° and 52 m,respectively,the collapses happed frequently during mining.Firstly,mining condi- tions,spatial structure and parameters were investigated.Then physical simulation and dynamic numerical tracing and elaborate simulation relating roof and top-coal were ap- plied based on 2D-Block Program and quantitative regularity of stress at variable depths had been estimated.Furthermore,it was manifested that effective measures,i.e.,fast mining,control symmetrical top-coal-caving at dip and strike directions,optimizing ventila- tion system,active-stereo preventing gas were performed successfully in mining practice. Ultimately,the derived dynamic hazard were prevented so as to safety mining.展开更多
In this paper, the coupled thermo-mechanical （TM） processes in the AEspoe Pillar Stability Experiment （APSE） carried out by the Swedish Nuclear Fuel and Waste Management Company （SKB） were simulated using both c...In this paper, the coupled thermo-mechanical （TM） processes in the AEspoe Pillar Stability Experiment （APSE） carried out by the Swedish Nuclear Fuel and Waste Management Company （SKB） were simulated using both continuum and discontinuum based numerical methods. Two-dimensional （2D） and three- dimensional （3D） finite element method （FEM） and 2D distinct element method （DEM） with particles were used. The main objective for the large scale in situ experiment is to investigate the yielding strength of crystalline rock and the formation of the excavation disturbed/damaged zone （EDZ） during excavation of two boreholes, pressurizing of one of the boreholes and heating. For the DEM simulations, the heat flow algorithm was newly introduced into the original code. The calculated stress, displacement and temperature distributions were compared with the ones obtained from in situ measurements and FEM simulations. A parametric study for initial microcracks was also performed to reproduce the spalling phenomena observed in the APSE.展开更多
This paper presents a calculation method that evaluates the extent of disturbance based on structural safety limits.Additionally,it summarizes the assessment methods for construction disturbance zones in shield tunnel...This paper presents a calculation method that evaluates the extent of disturbance based on structural safety limits.Additionally,it summarizes the assessment methods for construction disturbance zones in shield tunneling near pile foundations,urban ground structures,and underground structures.Furthermore,taking the construction of the Chengdu Jinxiu Tunnel under bridges and urban pipelines as the engineering background,a study on the disturbance zoning of adjacent structures was conducted.The most intense disturbance occurs within one week of the tunnel underpass process,and it has a significant impact within a range of two times the tunnel diameter along the tunnel axis.The bridge pile and bridge deck experience less disturbance from tunnel approaching construction,with a maximum disturbance zone characterized as medium disturbance.On the other hand,underground pipelines are subjected to more significant disturbances from tunnel construction,with a maximum disturbance zone classified as strong disturbance.The implementation of“bridge pile sleeve valve pipe grouting&underground pipeline ground grouting&tunnel advance grouting”in the field effectively limits the vertical settlement of bridges and pipelines,resulting in a decrease of approximately 0.1 in disturbance level for the structures.The disturbance zoning method can assess tunnel disturbance with structures,identify high-risk interference locations,and facilitate targeted design reinforcement solutions.展开更多
基金supported by the National Natural Science Foundation of China (No.10402033 and No.10772144)
文摘The damage process of fractured rock mass showed that the fracture in rocks induced roof collapse in Yangchangwan Coal Mine, China. The rock mass was particularly weak and fractured. There occurred 6 large-scale dynamical roof falls in the excavation disturbed zone （EDZ） with the collapsing volume of 216 m^3. First, the field detailed geological environment, regional seismic dynamics, and dynamic instability of roadways were generally investigated. Second, the field multiple-index monitoring measurements for detecting the deep delamination of the roof, convergence deformation, bolt-cable load, acoustic emission （AE） characteristic parameters, total AE events, AE energy-releasing rate, rock mass fracture, and damage were arranged. Finally, according to the time-space-strength relations, a quantitative assessment of the influence of rock-mass damage on the dynamic roof instability was accomplished.
基金supported by the National Natural Science Foundation of China(Nos.51404275 and U1361209)the Fundamental Research Funds for the Central Universities of China(2013QZ03)
文摘Due to the use of outdated mining technology or room and pillar mining process in small coal mines, the coal recovery ratio is only 10–25%. In many regions of China, the damage area caused by the small coal mines amounted to nearly one hundred square kilometers. Therefore, special mining techniques must be taken to reclaim the wasted resource in disturbed coal areas. This paper focuses on the different mining methods by analyzing the longwall panel layout and abandoned gateroad(AG) distribution in the abandoned area of Cuijiazhai coal mine in northwestern China. On the basis of three-dimensional geological model, FLAC3 D numerical simulation was employed. The abutment pressure distribution was simulated when the panel face passed through the disturbed areas. The proper angle of the inclined face was analyzed when the panel face passed through the abandoned gateroads. The results show that the head end of the face should be 13–20 m ahead of the tail end. The pillars on both sides of abandoned gateroads had not been damaged at the same time, and no large-area stress concentration occured above the main roof.Therefore, the coal reserves of disturbed areas can be successfully recovered by using underground longwall mining.
基金supported by ENRESA through the "Engineered barrier emplacement experiment in opalinus clay (EB experiment)" (2000–2003)support provided by the EC under the contract FIKW-CT-2000-00017
文摘Granular mixtures made of high-density pellets of bentonite are being evaluated as an alternative buffer material for waste isolation. Ease of handling is an often-mentioned advantage. The paper describes the experimental program performed to characterize the hydro-mechanical （HM） behaviour of compacted pellet mixtures. Grain size distribution was adjusted to a maximum pellet size compatible with the specimen＇s dimensions. Dry densities of statically compacted specimens varied in most of the cases in the range from 1.3 to 1.5 Mg/m^3. Pellets had a very high dry density, close to 2 Mg/m^3. The outstanding characteristic of these mixtures is their discontinuous porosity. Pore sizes of the compacted pellets varied around 10 nm. However, the inter-pellet size of the pores was four to five orders of magnitude higher. This double porosity and the highly expansive nature of the pellets controlled all the hydraulic and mechanical properties of the mixture. Performed tests include infiltration tests using different water injection rates and mechanisms of water transfer （in liquid and vapour phases）, suction-controlled oedometer tests and swelling pressure tests. The interpretation of some performed tests required back analysis procedures using a hydro-mechanical （HM） computer code. Material response was studied within the framework of the elastoplastic constitutive model proposed by Alonso et al. （1990） （Barcelona basic model, BBM）. Parameters for the model were identified and also a set of hydraulic laws are necessary to perform coupled HM analysis. A large scale in-situ test （the ＂EB＂ test in Mont Terri, Switzerland） was described and analyzed. Rock barrier parameters were adjusted on the basis of available tests. The test excavation, barrier emplacement and forced hydration were simulated by means of the CODEBRIGHT program. The comparison between measurements and computed results include data on relative humidity in the rock and the buffer, swelling pressures and displacements.
基金the National Natural Science Foundation of China(10402033,10772144)
文摘In virtue of effect of N-S intensive ground stress and mining disturbance to +579E2EB_(1+2) mining site at Weihuliang Mine,the dip angle and section height is 65° and 52 m,respectively,the collapses happed frequently during mining.Firstly,mining condi- tions,spatial structure and parameters were investigated.Then physical simulation and dynamic numerical tracing and elaborate simulation relating roof and top-coal were ap- plied based on 2D-Block Program and quantitative regularity of stress at variable depths had been estimated.Furthermore,it was manifested that effective measures,i.e.,fast mining,control symmetrical top-coal-caving at dip and strike directions,optimizing ventila- tion system,active-stereo preventing gas were performed successfully in mining practice. Ultimately,the derived dynamic hazard were prevented so as to safety mining.
基金conducted within the context of the international DECOVALEX Project (DEvelopment of COupled models and their VALidation against EXperiments)financed by Japan Atomic Energy Agency (JAEA) who was also one of the Funding Organizations of the projectChrister Anders-son from Swedish Nuclear Fuel and Waste Management Co.(SKB),Sweden
文摘In this paper, the coupled thermo-mechanical （TM） processes in the AEspoe Pillar Stability Experiment （APSE） carried out by the Swedish Nuclear Fuel and Waste Management Company （SKB） were simulated using both continuum and discontinuum based numerical methods. Two-dimensional （2D） and three- dimensional （3D） finite element method （FEM） and 2D distinct element method （DEM） with particles were used. The main objective for the large scale in situ experiment is to investigate the yielding strength of crystalline rock and the formation of the excavation disturbed/damaged zone （EDZ） during excavation of two boreholes, pressurizing of one of the boreholes and heating. For the DEM simulations, the heat flow algorithm was newly introduced into the original code. The calculated stress, displacement and temperature distributions were compared with the ones obtained from in situ measurements and FEM simulations. A parametric study for initial microcracks was also performed to reproduce the spalling phenomena observed in the APSE.
基金National Key R&D Program of China(No.2021YFB2600900)National Natural Science Foundation of China(Grant No.52078430).
文摘This paper presents a calculation method that evaluates the extent of disturbance based on structural safety limits.Additionally,it summarizes the assessment methods for construction disturbance zones in shield tunneling near pile foundations,urban ground structures,and underground structures.Furthermore,taking the construction of the Chengdu Jinxiu Tunnel under bridges and urban pipelines as the engineering background,a study on the disturbance zoning of adjacent structures was conducted.The most intense disturbance occurs within one week of the tunnel underpass process,and it has a significant impact within a range of two times the tunnel diameter along the tunnel axis.The bridge pile and bridge deck experience less disturbance from tunnel approaching construction,with a maximum disturbance zone characterized as medium disturbance.On the other hand,underground pipelines are subjected to more significant disturbances from tunnel construction,with a maximum disturbance zone classified as strong disturbance.The implementation of“bridge pile sleeve valve pipe grouting&underground pipeline ground grouting&tunnel advance grouting”in the field effectively limits the vertical settlement of bridges and pipelines,resulting in a decrease of approximately 0.1 in disturbance level for the structures.The disturbance zoning method can assess tunnel disturbance with structures,identify high-risk interference locations,and facilitate targeted design reinforcement solutions.
