Compared with the moving concentrated load model,it is more realistic and proper to use the moving distributed mass and load model to simulate the dynamics of a train moving along a railway track.In the problem of a m...Compared with the moving concentrated load model,it is more realistic and proper to use the moving distributed mass and load model to simulate the dynamics of a train moving along a railway track.In the problem of a moving concentrated load,there is only one critical velocity,which divides the load moving velocity into two categories:subcritical and supercritical.The locus of a concentrated load demarcates the space into two parts:the waves in these two domains are called the front and rear waves,respectively.In comparison,in the problem of moving distributed mass and load,there are two critical velocities,which results in three categories of the distributed mass moving velocity.Due to the presence of the distributed mass and load,the space is divided into three domains,in which three different waves exist.Much richer and different variation patterns of wave shapes arise in the problem of the moving distributed mass and load.The mechanisms responsible for these variation patterns are systematically studied.A semi-analytical solution to the steady-state is also obtained,which recovers that of the classical problem of a moving concentrated load when the length of the distributed mass and load approaches zero.展开更多
Configurational information entropy(CIE)analysis has been shown to be applicable for determining the neutron skin thickness(δnp)of neutron-rich nuclei from fragment production in projectile fragmentation reactions.Th...Configurational information entropy(CIE)analysis has been shown to be applicable for determining the neutron skin thickness(δnp)of neutron-rich nuclei from fragment production in projectile fragmentation reactions.The BNN+FRACS machine learning model was adopted to predict the fragment mass cross-sections(σ_(A))of the projectile fragmentation reactions induced by calcium isotopes from ^(36)Ca to ^(56)Ca on a ^(9)Be target at 140MeV/u.The fast Fourier transform was adopted to decompose the possible information compositions inσA distributions and determine the quantity of CIE(S_(A)[f]).It was found that the range of fragments significantly influences the quantity of S_(A)[f],which results in different trends of S_(A)[f]~δnp correlation.The linear S_(A)[f]~δnp correlation in a previous study[Nucl.Sci.Tech.33,6(2022)]could be reproduced using fragments with relatively large mass fragments,which verifies that S_(A)[f]determined from fragmentσAis sensitive to the neutron skin thickness of neutron-rich isotopes.展开更多
In this article,a comprehensive study of the fission process of Th,U,Pu,and Cm isotopes using a Yukawa-folded meanfield plus standard pairing model is presented.The study focused on analyzing the effects of the pairin...In this article,a comprehensive study of the fission process of Th,U,Pu,and Cm isotopes using a Yukawa-folded meanfield plus standard pairing model is presented.The study focused on analyzing the effects of the pairing interaction on the fragment mass distribution and its dependence on nuclear elongation.The significant role of pairing interactions in the fragment mass distributions of^(230)Th,^(234)U,^(240)Pu,and^(246)Cm was demonstrated.Numerical analysis revealed that increasing the pairing interaction strength decreased the asymmetric fragment mass distribution and increased the symmetric distribution.Furthermore,the odd-even mass differences at symmetric and asymmetric fission points were examined,highlighting their sensitivity to changes in the pairing interaction strength.Systematic analysis of the Th,U,Pu,and Cm isotope fragment mass distributions demonstrated the effectiveness of the model in reproducing the experimental data.In addition,the effects of the zero-point energy and half-width parameter on the fragment mass distribution for^(240)Pu were explored.Thus,this study provides valuable insights into the fission process by emphasizing the importance of pairing interactions and their relationship with nuclear elongation.展开更多
In order to study the effects of different extraction methods on the molar mass distribution and chain conformation of Fortunella margarita （Lour.） Swingle polysaccharides （FP）, we used extraction by hot water （...In order to study the effects of different extraction methods on the molar mass distribution and chain conformation of Fortunella margarita （Lour.） Swingle polysaccharides （FP）, we used extraction by hot water （WFP）, ultrasonic-assisted treatment （UFP）, microwave-assisted treatment （MFP） and ultrasonic/microwave-assisted treatment （UMFP）, and then Fourier transform infrared （FT-IR） spectroscopy as well as 1H and 13C nuclear magnetic resonance （NMR） spectroscopy to characterize the structural properties of FP extracted. The molar weight （Mw）, polydispersity index （Mw/Mn）, root-mean-square （RMS） turning radius （Rg）, molar mass distribution and chain conformation of FP were studied systematically using size-exclusion chromatography （SEC）, multi-angle laser light-scattering （MALLS） and refractive index （RI）. WFP, UFP, MFP and UMFP are all typical carbohydrates according to 1H NMR, laC NMR and FT-IR measurements. The type of glycosidic linkage is mainly a fl-glycosidic bond with a small amount of a-glycosidic bond. The results obtained by the SEC-MALLS-RI system showed the molar masses of WFP and UMFP were distributed mainly in the range of 5.0x10^6-1.0x10^7 g-mo1-1 and they accounted for 57.80% and 56.84% of total FP, respectively. The molar masses of UFP and MFP were distributed mainly in the 1.0x10^6-5.0x10^6 g.mol-1 range, which accounted for 38.24% and 52.39% of FP, respectively. WFP and UMFP in water were uniform spherical polymers; UFP and MFP were typical highly branched polymers and the degree of branching for MFP was higher compared to UFP. These results indicated the ultrasonic- and microwave-assisted extraction methods caused a significant decrease of the molar mass of FP but the ultrasonic/microwave synergistic extraction method had no effect.展开更多
The molar mass distribution of SSO in the first generation derived from the hydrolytic condensation oftwo trialkoxysilanes, [ 3- ( Methacryloxy ) propyl ] trimethoxysilane ( MPMS ) and vinyltrimethoxysilane ( VMS ) ,a...The molar mass distribution of SSO in the first generation derived from the hydrolytic condensation oftwo trialkoxysilanes, [ 3- ( Methacryloxy ) propyl ] trimethoxysilane ( MPMS ) and vinyltrimethoxysilane ( VMS ) ,are determined by UV-MALDI-TOF MS. The comparisons of theoretical masses with experimental masses arecalculated using the proposed compounds, which are assigned to formulas Tn (OH)m, Tn (OMe)y orTn(OH)x(OMe)y[T=RSiO1.5 (x+y)/2n, R=--(CH2)3OOCCH(CH3)CH2 and--CHCH2]. Both theproposed cage and ladder structures of SSO derived from similar sol-gel process of monomers are illustrated. Thecauses for the difference in structures between SSO M and SSO V is discussed as well.展开更多
On the basis of perennial monthly mean temperature and salinity data, the classification of monthly water masses at the surface and the bottom in the Bohai Sea, the Huanghai Sea and the East China Sea, has been made b...On the basis of perennial monthly mean temperature and salinity data, the classification of monthly water masses at the surface and the bottom in the Bohai Sea, the Huanghai Sea and the East China Sea, has been made by using the method of fuzzy cluster from the modified characteristic of water masses in the shallow water area. In this paper, the basic features, growth and decline patterns of water masses in relation to fishing grounds in the whole shelves of the Bohai Sea, the Huanghai Sea and the East China Sea are discussed with emphasis.展开更多
This paper utilizes the mathematical concept of approximation within an ellipsoid from a single viewpoint to present the spatial mass distribution function of the Earth's interior and its internal potential.The pr...This paper utilizes the mathematical concept of approximation within an ellipsoid from a single viewpoint to present the spatial mass distribution function of the Earth's interior and its internal potential.The primary focus lies in constructing the volume distribution of masses in the planet's interior, with the expansion coefficients being linear combinations of the Stokes constants. Several possible approaches are suggested for determining accurately these coefficients employing three-dimensional(biorthogonal)polynomials. By expressing the mass distribution function of the Earth's interior and its internal potential as a series, an algorithm is introduced for the calculation of gravitational energy. It allows us to estimate fluctuations in gravitational energy. The implementation of this algorithm offers the means of establishing the extent to which the Earth deviates from a state of hydrostatic equilibrium as a celestial body.Due to the aforementioned method, calculations have been conducted to validate its effectiveness and reliability. This example is given as an illustration of a given method for studying the internal structure of planets.展开更多
We solve the Schrodinger equation with a position-dependent mass（PDM） charged particle interacted via the superposition of the Morse-plus-Coulomb potentials and is under the influence of external magnetic and Aharo...We solve the Schrodinger equation with a position-dependent mass（PDM） charged particle interacted via the superposition of the Morse-plus-Coulomb potentials and is under the influence of external magnetic and Aharonov–Bohm（AB） flux fields. The nonrelativistic bound state energies together with their wave functions are calculated for two spatially-dependent mass distribution functions. We also study the thermal quantities of such a system. Further, the canonical formalism is used to compute various thermodynamic variables for second choosing mass by using the Gibbs formalism. We give plots for energy states as a function of various physical parameters. The behavior of the internal energy, specific heat, and entropy as functions of temperature and mass density parameter in the inverse-square mass case for different values of magnetic field are shown.展开更多
Clinical assessment of fluid volume status in children during malaria can be taxing and often inaccurate. During malaria, changes in fluid volume are rather multifarious and estimating this parameter, especially in si...Clinical assessment of fluid volume status in children during malaria can be taxing and often inaccurate. During malaria, changes in fluid volume are rather multifarious and estimating this parameter, especially in sick children is very challenging for clinicians who frequently rely on indices such as long capillary refill times, tachycardia, central venous pressure and decreased urine volume as guides. Here, we present the UHAS-MIDA, an open-source software tool that calculates the red blood cell (RBC) concentration and blood volume during malaria in children determined using a stable isotope of chromium (<sup>53</sup>Cr as the label) by gas chromatography-mass spectrometry in selective ion monitoring (GC/MS-SIM) analysis. A key component involves the determination of the compositions of the most abundant naturally occurring isotopes of Cr (<sup>50</sup>Cr, <sup>52</sup>Cr, <sup>53</sup>Cr), and converting the proportions into a 3 × 3 matrix. To estimate unknown proportions of chromium isotopic mixtures from the measured abundances of three ions, an inverse matrix was calculated. The inverse together with several inputs is then used to calculate the corrected MS ion abundances. Thus, we constructed the software tool UHAS- MIDA using HTML, CSS/Bootstrap, JavaScript, and PHP scripting languages. The tool enables the user to efficiently determine RBC concentration and fluid volume. The source code, binary packages and associated materials for UHAS-MIDA are freely available at https://github.com/bentil078/Abaye-et-al_UHASmida展开更多
Surface distribution and seasonal variation of alkalinity and specific alkalinity in Kuroshio area of the East ChinaSea and their application to the water mass tracing are discussed in this paper. Results show a disti...Surface distribution and seasonal variation of alkalinity and specific alkalinity in Kuroshio area of the East ChinaSea and their application to the water mass tracing are discussed in this paper. Results show a distinct seasonal variation of the alkalinity, which is concerned with the process of vertical mixing. Different specific alkalinity in various water masses has been found. On the basis of the difference of the specific alkalinity and the distribution of alkalinity, two water fronts in summer season, located at 27°-30°N and 124°-1 27°E, (Ⅰ), and at the northern waters about one latitude from the Taiwan Island, (Ⅱ); one in winter season at about one longitude from coast of mainland of China and 26°-30°N were found. In summer season, about 1-2 longitudes eastward shift of front (Ⅰ) is found by comparison of data in May and August. And the high alkalinity of the northern East China Sea in summer season may be caused by the Huanghe River runoff flowing southward along with the Huanghai Sea Coastal Current.展开更多
Nonlinear variations in the coordinate time series of global navigation satellite system(GNSS) reference stations are strongly correlated with surface displacements caused by environmental loading effects,including at...Nonlinear variations in the coordinate time series of global navigation satellite system(GNSS) reference stations are strongly correlated with surface displacements caused by environmental loading effects,including atmospheric, hydrological, and nontidal ocean loading. Continuous improvements in the accuracy of surface mass loading products, performance of Earth models, and precise data-processing technologies have significantly advanced research on the effects of environmental loading on nonlinear variations in GNSS coordinate time series. However, owing to theoretical limitations, the lack of high spatiotemporal resolution surface mass observations, and the coupling of GNSS technology-related systematic errors, environmental loading and nonlinear GNSS reference station displacements remain inconsistent. The applicability and capability of these loading products across different regions also require further evaluation. This paper outlines methods for modeling environmental loading, surface mass loading products, and service organizations. In addition, it summarizes recent advances in applying environmental loading to address nonlinear variations in global and regional GNSS coordinate time series. Moreover, the scientific questions of existing studies are summarized, and insights into future research directions are provided. The complex nonlinear motion of reference stations is a major factor limiting the accuracy of the current terrestrial reference frame. Further refining the environmental load modeling method, establishing a surface mass distribution model with high spatiotemporal resolution and reliability, exploring other environmental load factors such as ice sheet and artificial mass-change effects, and developing an optimal data-processing model and strategy for reprocessing global reference station data consistently could contribute to the development of a millimeter-level nonlinear motion model for GNSS reference stations with actual physical significance and provide theoretical support for establishing a terrestrial reference frame with 1 mm accuracy by 2050.展开更多
Under the background of the strategic goal of"double carbon,"the carbon reduction and consumption reduction of the iron and steel industry,especially in the ironmaking process,need to be further improved.The...Under the background of the strategic goal of"double carbon,"the carbon reduction and consumption reduction of the iron and steel industry,especially in the ironmaking process,need to be further improved.The raceway of tuyere provides the chemical environment,fuel and power source for blast furnace smelting.The research on the characteristics of its action mode and mechanism is of great significance to clarify the way of reducing carbon and consumption of blast furnace.In general,the formation mechanism,energy distribution,research progress,extended resource injection and directional regulation are studied and expounded.The research results of various scholars on the characteristics of the raceway show that the raceway is a complex process including multiphase turbulent flow,heat,momentum,mass and homogeneous and heterogeneous chemical reactions.With the development of multi-source fuel injection technology,the complexity of problem research is more obvious.Therefore,the collection of multi-factor,multi-directional and multi-process characteristic information in the raceway can provide guarantee for the stability,smooth operation,high yield,carbon reduction and consumption reduction of blast furnace and provide new ideas for the green and low-carbon development of iron and steel industry.展开更多
In this study,the fission properties of^(180)Hg were investigated based on Skyrme density functional theory.The impact of the high-order hexadecapole moment(q_(40))was observed at large deformations.With the q_(40)con...In this study,the fission properties of^(180)Hg were investigated based on Skyrme density functional theory.The impact of the high-order hexadecapole moment(q_(40))was observed at large deformations.With the q_(40)constraint,smooth and continuous potential energy surfaces could be obtained.In particular,the hexadecapole moment constraint is essential for obtaining appropriate scission configurations.The static fission path based on the PES supports the asymmetric fission of^(180)Hg.The asymmetric distribution of the fission yields of^(180)Hg was reproduced by the time-dependent generator coordinate method and agreed well with the experimental data.展开更多
The reactions of exo-cellulase （cellobiohydrolase, CBH） and endo-cellulase （endoglucanase, EG） were investigated by analyzing the insoluble residues of microcrystalline cellulose （MCC） and filter paper cellulose...The reactions of exo-cellulase （cellobiohydrolase, CBH） and endo-cellulase （endoglucanase, EG） were investigated by analyzing the insoluble residues of microcrystalline cellulose （MCC） and filter paper cellulose （FPC） during enzymatic hydrolysis. Molecular parameters including molecular weight and its distribution, degree of polymerization, and radii of gyration were measured by size exclusion chromatography coupled with multi-angle laser light scattering. No significant change in MCC chains was found during the whole reaction period, indicating that CBH digestion follows a layer-by-layer solubilization manner. This reaction mode might be the major reason for slow enzymatic hydrolysis of cellulose. On the other hand, the degree of polymerization of FPC chains decreases rapidly in the initial reaction, indicating that EG digestion follows a random scission manner, which may create new ends for CBH easily. The slopes of the conformation plots for MCC and FPC increase gradually, indicating stronger chain stiffness of cellulose during hvdrolvsis展开更多
A long-term （9 years） gravity change in Chinese mainland is obtained on the basis of observation of the ground-based national gravity network. The result shows several features that may be related to sore, large-sca...A long-term （9 years） gravity change in Chinese mainland is obtained on the basis of observation of the ground-based national gravity network. The result shows several features that may be related to sore, large-scale groundwater pumping in North China, glacier-water flow and storage in Tianshan region, and pre seismic gravity changes of the 2008 MsS. 0 Wenchuan earthquake, which are spatially similar to co-seismi, changes but reversed in sign. These features are also shown in the result of the satellite-based GRACE obser vation, after a height effect is corrected with GPS data.展开更多
An in-depth understanding of the fracture behavior and mechanism of metallic shells under internal explosive loading can help develop material designs for warheads and regulate the quantity and mass distribution of th...An in-depth understanding of the fracture behavior and mechanism of metallic shells under internal explosive loading can help develop material designs for warheads and regulate the quantity and mass distribution of the fragments formed.This study investigated the fragmentation performance of a new high-carbon silicon-manganese(HCSiMn)steel cylindrical shell through fragment recovery experiments.Compared with the conventional 45Cr steel shell,the number of small mass fragments produced by the HCSi Mn steel shell was significantly increased with a scale parameter of 0.57 g fitted by the Weibull distribution model.The fragmentation process of the HCSi Mn shell exhibited more brittle tensile fracture characteristics,with the microcrack damage zone on the outer surface being the direct cause of its high fragmentation.On the one hand,the doping of alloy elements resulted in grain refinement by forming metallographic structure of tempered sorbite,so that microscopic intergranular fracture reduces the characteristic mass of the fragments;on the other hand,the distribution of alloy carbides can exert a"pinning"effect on the substrate grains,causing more initial cracks to form and propagate along the brittle carbides,further improving the shell fragmentation.Although the killing power radius for light armored vehicles was slightly reduced by about 6%,the dense killing radius of HCSiMn steel projectile against personnel can be significantly increased by about 26%based on theoretical assessment.These results provided an experimental basis for high fragmentation warhead design,and to some extent,revealed the correlation mechanism between metallographic structure and shell fragmentation.展开更多
In recent years,in order to improve the destructive effectiveness of munitions,the use of new types of destructive elements is an important way to improve destructive effectiveness.As a new type of reactive material,r...In recent years,in order to improve the destructive effectiveness of munitions,the use of new types of destructive elements is an important way to improve destructive effectiveness.As a new type of reactive material,reactive alloy contains a large portion of reactive metal elements(Al,Mg,Ti,Zr,etc.),which breaks up under high-velocity impact conditions,generating a large number of high-temperature combustible fragments,which undergo a violent combustion reaction with air.Compared with traditional metal polymers(Al-PTFE)and other reactive composites,it has higher density and strength,excellent mechanical properties and broader application prospects.Currently,researchers have mainly investigated the impact energy release mechanism of reactive alloys through impact tests,and found that there are several important stages in the process of the material from fragmentation to reaction,i.e.,impact fragmentation of the material,rapid heating and combustion reaction.This paper focuses on three problems that need to be solved in the impact-induced energy release process of reactive alloys,namely:the fragmentation mechanism and size distribution law of the fragments produced by the impact of the material on the target,the relationship between the transient temperatures and the size of the fragments,and the reaction temperatures and size thresholds of the fragments to undergo the chemical reaction.The current status of the research of the above problems is reviewed,some potential directions to reveal the impact induced reaction mechanism of reactive alloy is discussed.展开更多
We measure properties of dark matter in four well motivated scenarios: fermions with ultra-relativistic thermal equilibrium (URTE), bosons with URTE, fermions with non-relativistic thermal equilibrium (NRTE), and boso...We measure properties of dark matter in four well motivated scenarios: fermions with ultra-relativistic thermal equilibrium (URTE), bosons with URTE, fermions with non-relativistic thermal equilibrium (NRTE), and bosons with NRTE. We attempt to discriminate between these four scenarios with studies of spiral galaxy rotation curves, and galaxy stellar mass distributions. The measurements show evidence for boson dark matter with a significance of 3.5σ, and obtain no significant discrimination between URTE and NRTE.展开更多
By simplifying the characters in the air reverse circulation bit interior fluid field, the authors used air dynamics and fluid mechanics to calculate the air distribution in the bit and obtained an equation of flow di...By simplifying the characters in the air reverse circulation bit interior fluid field, the authors used air dynamics and fluid mechanics to calculate the air distribution in the bit and obtained an equation of flow distribution with a unique resolution. This study will provide help for making certain the bit parameters of the bit structure effectively and study the air reverse circulation bit interior fluid field character deeply.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.11772335)the Strategic Priority Research Program(B)of the Chinese Academy of Sciences(Grant No.XDB22020201)the National Key Research and Development Program of China(Grant Nos.2016YFB1200602-09,and 2016YFB1200602-10)。
文摘Compared with the moving concentrated load model,it is more realistic and proper to use the moving distributed mass and load model to simulate the dynamics of a train moving along a railway track.In the problem of a moving concentrated load,there is only one critical velocity,which divides the load moving velocity into two categories:subcritical and supercritical.The locus of a concentrated load demarcates the space into two parts:the waves in these two domains are called the front and rear waves,respectively.In comparison,in the problem of moving distributed mass and load,there are two critical velocities,which results in three categories of the distributed mass moving velocity.Due to the presence of the distributed mass and load,the space is divided into three domains,in which three different waves exist.Much richer and different variation patterns of wave shapes arise in the problem of the moving distributed mass and load.The mechanisms responsible for these variation patterns are systematically studied.A semi-analytical solution to the steady-state is also obtained,which recovers that of the classical problem of a moving concentrated load when the length of the distributed mass and load approaches zero.
基金the National Natural Science Foundation of China(No.11975091)the Program for Innovative Research Team(in Science and Technology)in the University of Henan Province,China(No.21IRTSTHN011).
文摘Configurational information entropy(CIE)analysis has been shown to be applicable for determining the neutron skin thickness(δnp)of neutron-rich nuclei from fragment production in projectile fragmentation reactions.The BNN+FRACS machine learning model was adopted to predict the fragment mass cross-sections(σ_(A))of the projectile fragmentation reactions induced by calcium isotopes from ^(36)Ca to ^(56)Ca on a ^(9)Be target at 140MeV/u.The fast Fourier transform was adopted to decompose the possible information compositions inσA distributions and determine the quantity of CIE(S_(A)[f]).It was found that the range of fragments significantly influences the quantity of S_(A)[f],which results in different trends of S_(A)[f]~δnp correlation.The linear S_(A)[f]~δnp correlation in a previous study[Nucl.Sci.Tech.33,6(2022)]could be reproduced using fragments with relatively large mass fragments,which verifies that S_(A)[f]determined from fragmentσAis sensitive to the neutron skin thickness of neutron-rich isotopes.
基金This work was supported by the National Natural Science Foundation of China(Nos.12275115 and 12175097)the Educational Department of Liaoning Province(No.LJKMZ20221410).
文摘In this article,a comprehensive study of the fission process of Th,U,Pu,and Cm isotopes using a Yukawa-folded meanfield plus standard pairing model is presented.The study focused on analyzing the effects of the pairing interaction on the fragment mass distribution and its dependence on nuclear elongation.The significant role of pairing interactions in the fragment mass distributions of^(230)Th,^(234)U,^(240)Pu,and^(246)Cm was demonstrated.Numerical analysis revealed that increasing the pairing interaction strength decreased the asymmetric fragment mass distribution and increased the symmetric distribution.Furthermore,the odd-even mass differences at symmetric and asymmetric fission points were examined,highlighting their sensitivity to changes in the pairing interaction strength.Systematic analysis of the Th,U,Pu,and Cm isotope fragment mass distributions demonstrated the effectiveness of the model in reproducing the experimental data.In addition,the effects of the zero-point energy and half-width parameter on the fragment mass distribution for^(240)Pu were explored.Thus,this study provides valuable insights into the fission process by emphasizing the importance of pairing interactions and their relationship with nuclear elongation.
基金Supported by Science and Technology Plan Major Project of Fujian Province(2013Y0003)Agricultural Products(fruits and vegetables) Processing Engineering Technology Research Center Funding Projects of Fujian Province(2009N2002)+1 种基金Scientific and Technological Innovation Team Support Plan of Institution of Higher Learning in Fujian Province([2012]03)Scientific and Technological Innovation Team Support Plan of Fujian Agriculture and Forestry University(cxtd12009)
文摘In order to study the effects of different extraction methods on the molar mass distribution and chain conformation of Fortunella margarita （Lour.） Swingle polysaccharides （FP）, we used extraction by hot water （WFP）, ultrasonic-assisted treatment （UFP）, microwave-assisted treatment （MFP） and ultrasonic/microwave-assisted treatment （UMFP）, and then Fourier transform infrared （FT-IR） spectroscopy as well as 1H and 13C nuclear magnetic resonance （NMR） spectroscopy to characterize the structural properties of FP extracted. The molar weight （Mw）, polydispersity index （Mw/Mn）, root-mean-square （RMS） turning radius （Rg）, molar mass distribution and chain conformation of FP were studied systematically using size-exclusion chromatography （SEC）, multi-angle laser light-scattering （MALLS） and refractive index （RI）. WFP, UFP, MFP and UMFP are all typical carbohydrates according to 1H NMR, laC NMR and FT-IR measurements. The type of glycosidic linkage is mainly a fl-glycosidic bond with a small amount of a-glycosidic bond. The results obtained by the SEC-MALLS-RI system showed the molar masses of WFP and UMFP were distributed mainly in the range of 5.0x10^6-1.0x10^7 g-mo1-1 and they accounted for 57.80% and 56.84% of total FP, respectively. The molar masses of UFP and MFP were distributed mainly in the 1.0x10^6-5.0x10^6 g.mol-1 range, which accounted for 38.24% and 52.39% of FP, respectively. WFP and UMFP in water were uniform spherical polymers; UFP and MFP were typical highly branched polymers and the degree of branching for MFP was higher compared to UFP. These results indicated the ultrasonic- and microwave-assisted extraction methods caused a significant decrease of the molar mass of FP but the ultrasonic/microwave synergistic extraction method had no effect.
基金Sponsored by the Foundation of Department of Science and Technology of Heilongjiang Province
文摘The molar mass distribution of SSO in the first generation derived from the hydrolytic condensation oftwo trialkoxysilanes, [ 3- ( Methacryloxy ) propyl ] trimethoxysilane ( MPMS ) and vinyltrimethoxysilane ( VMS ) ,are determined by UV-MALDI-TOF MS. The comparisons of theoretical masses with experimental masses arecalculated using the proposed compounds, which are assigned to formulas Tn (OH)m, Tn (OMe)y orTn(OH)x(OMe)y[T=RSiO1.5 (x+y)/2n, R=--(CH2)3OOCCH(CH3)CH2 and--CHCH2]. Both theproposed cage and ladder structures of SSO derived from similar sol-gel process of monomers are illustrated. Thecauses for the difference in structures between SSO M and SSO V is discussed as well.
基金This subject is aided financially by Chinese National Natural Science Foundation.
文摘On the basis of perennial monthly mean temperature and salinity data, the classification of monthly water masses at the surface and the bottom in the Bohai Sea, the Huanghai Sea and the East China Sea, has been made by using the method of fuzzy cluster from the modified characteristic of water masses in the shallow water area. In this paper, the basic features, growth and decline patterns of water masses in relation to fishing grounds in the whole shelves of the Bohai Sea, the Huanghai Sea and the East China Sea are discussed with emphasis.
文摘This paper utilizes the mathematical concept of approximation within an ellipsoid from a single viewpoint to present the spatial mass distribution function of the Earth's interior and its internal potential.The primary focus lies in constructing the volume distribution of masses in the planet's interior, with the expansion coefficients being linear combinations of the Stokes constants. Several possible approaches are suggested for determining accurately these coefficients employing three-dimensional(biorthogonal)polynomials. By expressing the mass distribution function of the Earth's interior and its internal potential as a series, an algorithm is introduced for the calculation of gravitational energy. It allows us to estimate fluctuations in gravitational energy. The implementation of this algorithm offers the means of establishing the extent to which the Earth deviates from a state of hydrostatic equilibrium as a celestial body.Due to the aforementioned method, calculations have been conducted to validate its effectiveness and reliability. This example is given as an illustration of a given method for studying the internal structure of planets.
文摘We solve the Schrodinger equation with a position-dependent mass（PDM） charged particle interacted via the superposition of the Morse-plus-Coulomb potentials and is under the influence of external magnetic and Aharonov–Bohm（AB） flux fields. The nonrelativistic bound state energies together with their wave functions are calculated for two spatially-dependent mass distribution functions. We also study the thermal quantities of such a system. Further, the canonical formalism is used to compute various thermodynamic variables for second choosing mass by using the Gibbs formalism. We give plots for energy states as a function of various physical parameters. The behavior of the internal energy, specific heat, and entropy as functions of temperature and mass density parameter in the inverse-square mass case for different values of magnetic field are shown.
文摘Clinical assessment of fluid volume status in children during malaria can be taxing and often inaccurate. During malaria, changes in fluid volume are rather multifarious and estimating this parameter, especially in sick children is very challenging for clinicians who frequently rely on indices such as long capillary refill times, tachycardia, central venous pressure and decreased urine volume as guides. Here, we present the UHAS-MIDA, an open-source software tool that calculates the red blood cell (RBC) concentration and blood volume during malaria in children determined using a stable isotope of chromium (<sup>53</sup>Cr as the label) by gas chromatography-mass spectrometry in selective ion monitoring (GC/MS-SIM) analysis. A key component involves the determination of the compositions of the most abundant naturally occurring isotopes of Cr (<sup>50</sup>Cr, <sup>52</sup>Cr, <sup>53</sup>Cr), and converting the proportions into a 3 × 3 matrix. To estimate unknown proportions of chromium isotopic mixtures from the measured abundances of three ions, an inverse matrix was calculated. The inverse together with several inputs is then used to calculate the corrected MS ion abundances. Thus, we constructed the software tool UHAS- MIDA using HTML, CSS/Bootstrap, JavaScript, and PHP scripting languages. The tool enables the user to efficiently determine RBC concentration and fluid volume. The source code, binary packages and associated materials for UHAS-MIDA are freely available at https://github.com/bentil078/Abaye-et-al_UHASmida
文摘Surface distribution and seasonal variation of alkalinity and specific alkalinity in Kuroshio area of the East ChinaSea and their application to the water mass tracing are discussed in this paper. Results show a distinct seasonal variation of the alkalinity, which is concerned with the process of vertical mixing. Different specific alkalinity in various water masses has been found. On the basis of the difference of the specific alkalinity and the distribution of alkalinity, two water fronts in summer season, located at 27°-30°N and 124°-1 27°E, (Ⅰ), and at the northern waters about one latitude from the Taiwan Island, (Ⅱ); one in winter season at about one longitude from coast of mainland of China and 26°-30°N were found. In summer season, about 1-2 longitudes eastward shift of front (Ⅰ) is found by comparison of data in May and August. And the high alkalinity of the northern East China Sea in summer season may be caused by the Huanghe River runoff flowing southward along with the Huanghai Sea Coastal Current.
基金supported by the Basic Science Center Project of the National Natural Science Foundation of China(42388102)the National Natural Science Foundation of China(42174030)+2 种基金the Special Fund of Hubei Luojia Laboratory(220100020)the Major Science and Technology Program for Hubei Province(2022AAA002)the Fundamental Research Funds for the Central Universities of China(2042022dx0001 and 2042023kfyq01)。
文摘Nonlinear variations in the coordinate time series of global navigation satellite system(GNSS) reference stations are strongly correlated with surface displacements caused by environmental loading effects,including atmospheric, hydrological, and nontidal ocean loading. Continuous improvements in the accuracy of surface mass loading products, performance of Earth models, and precise data-processing technologies have significantly advanced research on the effects of environmental loading on nonlinear variations in GNSS coordinate time series. However, owing to theoretical limitations, the lack of high spatiotemporal resolution surface mass observations, and the coupling of GNSS technology-related systematic errors, environmental loading and nonlinear GNSS reference station displacements remain inconsistent. The applicability and capability of these loading products across different regions also require further evaluation. This paper outlines methods for modeling environmental loading, surface mass loading products, and service organizations. In addition, it summarizes recent advances in applying environmental loading to address nonlinear variations in global and regional GNSS coordinate time series. Moreover, the scientific questions of existing studies are summarized, and insights into future research directions are provided. The complex nonlinear motion of reference stations is a major factor limiting the accuracy of the current terrestrial reference frame. Further refining the environmental load modeling method, establishing a surface mass distribution model with high spatiotemporal resolution and reliability, exploring other environmental load factors such as ice sheet and artificial mass-change effects, and developing an optimal data-processing model and strategy for reprocessing global reference station data consistently could contribute to the development of a millimeter-level nonlinear motion model for GNSS reference stations with actual physical significance and provide theoretical support for establishing a terrestrial reference frame with 1 mm accuracy by 2050.
基金financially supported by the Major Science and Technology-Special Plan“Unveiling and Leading”Project of Shanxi Province(No.202201050201011)National Natural Science Foundation of China(No.52274316)+4 种基金China Baowu Low-Carbon Metallurgy Innovation Foundation(No.BWLCF202116)National Key R&D Program of China(No.2022YFE0208100)Major Science and Technology Project of Xinjiang(No.2022A01003)Major Science and Technology Projects of Anhui Province(No.202210700037)Special Funding for Science and Technology of China Minmetals Corporation(No.2021ZXD01).
文摘Under the background of the strategic goal of"double carbon,"the carbon reduction and consumption reduction of the iron and steel industry,especially in the ironmaking process,need to be further improved.The raceway of tuyere provides the chemical environment,fuel and power source for blast furnace smelting.The research on the characteristics of its action mode and mechanism is of great significance to clarify the way of reducing carbon and consumption of blast furnace.In general,the formation mechanism,energy distribution,research progress,extended resource injection and directional regulation are studied and expounded.The research results of various scholars on the characteristics of the raceway show that the raceway is a complex process including multiphase turbulent flow,heat,momentum,mass and homogeneous and heterogeneous chemical reactions.With the development of multi-source fuel injection technology,the complexity of problem research is more obvious.Therefore,the collection of multi-factor,multi-directional and multi-process characteristic information in the raceway can provide guarantee for the stability,smooth operation,high yield,carbon reduction and consumption reduction of blast furnace and provide new ideas for the green and low-carbon development of iron and steel industry.
基金supported by the National Key R and D Program of China(No.2022YFA1602000)National Natural Science Foundation of China(Nos.12275081 and U1732138)Continuous-support Basic Scientific Research Project.
文摘In this study,the fission properties of^(180)Hg were investigated based on Skyrme density functional theory.The impact of the high-order hexadecapole moment(q_(40))was observed at large deformations.With the q_(40)constraint,smooth and continuous potential energy surfaces could be obtained.In particular,the hexadecapole moment constraint is essential for obtaining appropriate scission configurations.The static fission path based on the PES supports the asymmetric fission of^(180)Hg.The asymmetric distribution of the fission yields of^(180)Hg was reproduced by the time-dependent generator coordinate method and agreed well with the experimental data.
基金Supported by the National Natural Science Foundation of China （20976130 and 20806057）, National Science and Technology Pillar Program of China （2007BAD42B02）, Program for New Century Excellent Talents in University of Ministry of Education of China （No. NCET-08-0386）, and the R＆D program of Tianjin Binhai New Area （2010-BK17C004）..
文摘The reactions of exo-cellulase （cellobiohydrolase, CBH） and endo-cellulase （endoglucanase, EG） were investigated by analyzing the insoluble residues of microcrystalline cellulose （MCC） and filter paper cellulose （FPC） during enzymatic hydrolysis. Molecular parameters including molecular weight and its distribution, degree of polymerization, and radii of gyration were measured by size exclusion chromatography coupled with multi-angle laser light scattering. No significant change in MCC chains was found during the whole reaction period, indicating that CBH digestion follows a layer-by-layer solubilization manner. This reaction mode might be the major reason for slow enzymatic hydrolysis of cellulose. On the other hand, the degree of polymerization of FPC chains decreases rapidly in the initial reaction, indicating that EG digestion follows a random scission manner, which may create new ends for CBH easily. The slopes of the conformation plots for MCC and FPC increase gradually, indicating stronger chain stiffness of cellulose during hvdrolvsis
基金supported by the National Natural Science Foundation of China (41004030)
文摘A long-term （9 years） gravity change in Chinese mainland is obtained on the basis of observation of the ground-based national gravity network. The result shows several features that may be related to sore, large-scale groundwater pumping in North China, glacier-water flow and storage in Tianshan region, and pre seismic gravity changes of the 2008 MsS. 0 Wenchuan earthquake, which are spatially similar to co-seismi, changes but reversed in sign. These features are also shown in the result of the satellite-based GRACE obser vation, after a height effect is corrected with GPS data.
基金funded by the National Natural Science Foundation of China (Grant Nos.12302444 and 12202349)。
文摘An in-depth understanding of the fracture behavior and mechanism of metallic shells under internal explosive loading can help develop material designs for warheads and regulate the quantity and mass distribution of the fragments formed.This study investigated the fragmentation performance of a new high-carbon silicon-manganese(HCSiMn)steel cylindrical shell through fragment recovery experiments.Compared with the conventional 45Cr steel shell,the number of small mass fragments produced by the HCSi Mn steel shell was significantly increased with a scale parameter of 0.57 g fitted by the Weibull distribution model.The fragmentation process of the HCSi Mn shell exhibited more brittle tensile fracture characteristics,with the microcrack damage zone on the outer surface being the direct cause of its high fragmentation.On the one hand,the doping of alloy elements resulted in grain refinement by forming metallographic structure of tempered sorbite,so that microscopic intergranular fracture reduces the characteristic mass of the fragments;on the other hand,the distribution of alloy carbides can exert a"pinning"effect on the substrate grains,causing more initial cracks to form and propagate along the brittle carbides,further improving the shell fragmentation.Although the killing power radius for light armored vehicles was slightly reduced by about 6%,the dense killing radius of HCSiMn steel projectile against personnel can be significantly increased by about 26%based on theoretical assessment.These results provided an experimental basis for high fragmentation warhead design,and to some extent,revealed the correlation mechanism between metallographic structure and shell fragmentation.
文摘In recent years,in order to improve the destructive effectiveness of munitions,the use of new types of destructive elements is an important way to improve destructive effectiveness.As a new type of reactive material,reactive alloy contains a large portion of reactive metal elements(Al,Mg,Ti,Zr,etc.),which breaks up under high-velocity impact conditions,generating a large number of high-temperature combustible fragments,which undergo a violent combustion reaction with air.Compared with traditional metal polymers(Al-PTFE)and other reactive composites,it has higher density and strength,excellent mechanical properties and broader application prospects.Currently,researchers have mainly investigated the impact energy release mechanism of reactive alloys through impact tests,and found that there are several important stages in the process of the material from fragmentation to reaction,i.e.,impact fragmentation of the material,rapid heating and combustion reaction.This paper focuses on three problems that need to be solved in the impact-induced energy release process of reactive alloys,namely:the fragmentation mechanism and size distribution law of the fragments produced by the impact of the material on the target,the relationship between the transient temperatures and the size of the fragments,and the reaction temperatures and size thresholds of the fragments to undergo the chemical reaction.The current status of the research of the above problems is reviewed,some potential directions to reveal the impact induced reaction mechanism of reactive alloy is discussed.
文摘We measure properties of dark matter in four well motivated scenarios: fermions with ultra-relativistic thermal equilibrium (URTE), bosons with URTE, fermions with non-relativistic thermal equilibrium (NRTE), and bosons with NRTE. We attempt to discriminate between these four scenarios with studies of spiral galaxy rotation curves, and galaxy stellar mass distributions. The measurements show evidence for boson dark matter with a significance of 3.5σ, and obtain no significant discrimination between URTE and NRTE.
基金Jilin Province Science and Technology Development Leading Project(No.200405033)
文摘By simplifying the characters in the air reverse circulation bit interior fluid field, the authors used air dynamics and fluid mechanics to calculate the air distribution in the bit and obtained an equation of flow distribution with a unique resolution. This study will provide help for making certain the bit parameters of the bit structure effectively and study the air reverse circulation bit interior fluid field character deeply.
