To generate a neutron beam exhibiting a Maxwellian energy distribution with narrow emission angles for measuring the neutron capture reaction rates of the s-process nuclides,a monoenergetic 3.4 MeV proton beam produce...To generate a neutron beam exhibiting a Maxwellian energy distribution with narrow emission angles for measuring the neutron capture reaction rates of the s-process nuclides,a monoenergetic 3.4 MeV proton beam produced by the tandem-accelerator in the China Institute of Atomic Energy was utilized.The proton beam was first transmitted through a 60.5μm aluminum foil and then impinged on a natural LiF target to produce neutron beam via^(7)Li(p,n)7Be reaction.The quasi-Gaussian energy distribution of protons in the LiF target resulted in neutron energy spectra that agreed with a Maxwellian energy distribution at kT=(22±2)keV,which was achieved by integrating neutrons detected within an emission angle of 65.0°±2.6°using a ^(6)Li glass detector positioned at 65°relative to the proton beam direction.The narrow angular spread of the Maxwelliandistributed neutron beam enables direct measurement of neutron capture cross-sections for most s-process nuclides,overcoming previous experimental limitations associated with broad angular distributions.展开更多
Dear Editor,This letter addresses the challenge of achieving robust global coordination in multi-agent systems(MASs)subject to heterogeneous actuator saturation and additive input disturbances.We develop a novel distr...Dear Editor,This letter addresses the challenge of achieving robust global coordination in multi-agent systems(MASs)subject to heterogeneous actuator saturation and additive input disturbances.We develop a novel distributed control framework that strategically integrates a redesigned saturation function to handle the nonlinear actuator constraint and a high-gain feedback mechanism for effective disturbance rejection.展开更多
Thermal storage electric heating(TSEH),as a prevalent variable load resource,offers significant potential for enhancing system flexibility when aggregated into a cluster.To address the uncertainties of renewable energ...Thermal storage electric heating(TSEH),as a prevalent variable load resource,offers significant potential for enhancing system flexibility when aggregated into a cluster.To address the uncertainties of renewable energy and load forecasting in active distribution networks(ADN),this paper proposes a multi-timescale coordinated optimal dispatch strategy that incorporates TSEH clusters.It utilizes the thermal storage characteristics and short-term regulation capabilities of TSEH,along with the rapid and gradual response characteristics of resources in active distribution grids,to develop a coordinated optimization dispatch mechanism for day-ahead,intraday,and real-time stages.It provides a coordinated optimized dispatch technique across several timescales for active distribution grids,taking into account the integration of TSEH clusters.The proposed method is validated on a modified IEEE 33-node system.Simulation results demonstrate that the participation of TSEH in collaborative optimization significantly reduces the total system operating cost by 8.71%compared to the scenario without TSEH.This cost reduction is attributed to a 10.84%decrease in interaction costs with the main grid and a 47.41%reduction in network loss costs,validating effective peak shaving and valley filling.The multi-timescale framework further enhances economic efficiency,with overall operating costs progressively decreasing by 3.91%(intraday)and 4.59%(real-time),and interaction costs further reduced by 5.34%and 9.25%,respectively.Moreover,the approach enhances system stability by effectively suppressing node voltage fluctuations and ensuring all voltages remain within safe operating limits during real-time operation.Therefore,the proposed approach achieves rational coordination of diverse resources,significantly improving the economic efficiency and stability of ADNs.展开更多
With the rapid development of generative artificial intelligence(GenAI),the task of story visualization,which transforms natural language narratives into coherent and consistent image sequences,has attracted growing r...With the rapid development of generative artificial intelligence(GenAI),the task of story visualization,which transforms natural language narratives into coherent and consistent image sequences,has attracted growing research attention.However,existing methods still face limitations in balancing multi-frame character consistency and generation efficiency,which restricts their feasibility for large-scale practical applications.To address this issue,this study proposes a modular cloud-based distributed system built on Stable Diffusion.By separating the character generation and story generation processes,and integratingmulti-feature control techniques,a cachingmechanism,and an asynchronous task queue architecture,the system enhances generation efficiency and scalability.The experimental design includes both automated and human evaluations of character consistency,performance testing,and multinode simulation.The results show that the proposed system outperforms the baseline model StoryGen in both CLIP-I and human evaluation metrics.In terms of performance,under the experimental environment of this study,dual-node deployment reduces average waiting time by approximately 19%,while the four-node simulation further reduces it by up to 65%.Overall,this study demonstrates the advantages of cloud-distributed GenAI in maintaining character consistency and reducing generation latency,highlighting its potential value inmulti-user collaborative story visualization applications.展开更多
Objectives This study aimed to explore the lagged and cumulative effects of risk factors on disability in older adults using distributed lag non-linear models(DLNMs).Methods We utilized data from the China Health and ...Objectives This study aimed to explore the lagged and cumulative effects of risk factors on disability in older adults using distributed lag non-linear models(DLNMs).Methods We utilized data from the China Health and Retirement Longitudinal Study(CHARLS).After feature selection via Elastic Net Regularization,we applied DLNMs to evaluate the lagged effects of risk factors.Disability was defined as the presence of any difficulties in basic activities of daily living(BADL).The cumulative relative risk(CRR)was calculated by summing the lag-specific risk estimates,representing the cumulative disability risk over the specified lag period.Effect modifications and sensitivity analyses were also performed.Results This study included a total of 2,318 participants.Early-phase lag factors,such as the difficulty in stooping(CRR=3.58;95%CI:2.31-5.55;P<0.001)and walking(CRR=2.77;95%CI:1.39-5.55;P<0.001),exerted the strongest effects immediately upon occurrence.Mid-phase lag factors,such as arthritis(CRR=1.51;95%CI:1.10-2.06;P=0.001),showed a resurgence in disability risk within 2-3 years.Late-phase lag factors,including depressive symptoms(CRR=2.38;95%CI:1.30-4.35;P<0.001)and elevated systolic blood pressure(CRR=1.64;95%CI:1.06-2.79;P=0.02),exhibited significant long-term cumulative risks.Conversely,grip strength(CRR=0.80;95%CI:0.54-0.95;P=0.02)and social participation(CRR=0.89;95%CI:0.73-0.99;P=0.04)were significant protective factors.Conclusions The findings underscore the importance of tailored interventions that account for various lag characteristics of different factors to effectively mitigate disability risk.Future studies should explore the underlying biological and sociological mechanisms of these lagged effects,identify intervention strategies that target risk factors with different lagged patterns,and evaluate their effectiveness.展开更多
Tajikistan represents a core region of the biodiversity hotspot in Central Asian mountains and has exceptional vascular plant diversity.However,the species diversity of the country faces urgent conservation challenges...Tajikistan represents a core region of the biodiversity hotspot in Central Asian mountains and has exceptional vascular plant diversity.However,the species diversity of the country faces urgent conservation challenges.There has been a lack of a comprehensive and multidimensional assessment to inform strategic conservation planning.Therefore,this study integrated 4 key biodiversity indices including species richness(SR),phylogenetic diversity(PD),threatened species richness(TSR),and endemic species richness(ESR)to map species diversity distribution patterns,identify conservation gaps,and elucidate their effects of climatic factors.This study revealed that species diversity shows a clear trend of decreasing from the western region to the eastern region of Tajikistan.The central–western mountains(specifically the Gissar-Darvasian and Zeravshanian regions)emerge as irreplaceable biodiversity hotspots.However,we found a severe spatial mismatch between these priority areas and the existing protected areas(PAs).Protection coverage for all hotspots was alarmingly low,ranging from 31.00%to 38.00%.Consequently,a critical 64.80%of integrated priority areas fall outside of the current PAs,representing a major conservation gap.This study identified precipitation seasonality and isothermality as the principal drivers,collectively explaining over 50.00%of the diversity variation and suggesting high vulnerability to hydrological shifts.Furthermore,we detected significant geographic sampling bias in the public biodiversity databases,with the most critical hotspot being systematically under-sampled.This study provides a robust scientific basis for conservation action,highlighting the urgent need to strategically expand PAs in the under-protected southwestern region and to mitigate critical sampling gaps through targeted data digitization and field surveys.These measures are indispensable for securing Tajikistan’s unique biodiversity and achieving the Kunming-Montreal Global Biodiversity Framework Target 3(“30×30 Protection”).展开更多
Nitrogen(N)and phosphorus(P)are essential nutrients and can significantly impact primary productivity of the ecosystem causing water environmental problems.However,their cycling mechanisms are not well understood in a...Nitrogen(N)and phosphorus(P)are essential nutrients and can significantly impact primary productivity of the ecosystem causing water environmental problems.However,their cycling mechanisms are not well understood in alpine mountains with climate change.Hence,94 samples of river water were collected from 2018 to 2020 in the headwaters of the Shule River Basin to assess the nutrients spatiotemporal distribution and combined ap-proach of water quality index to assess water quality and potential sources.The findings depict that high nutrient concentrations were found to coincide with snowmelt and glacial meltwater and rainfall recharge periods,while total flux peaked from June to September due to increased runoff.Notably,total nitrogen(TN)concentrations were significantly higher near the town,primarily attributed to the replenishment of nitrate(NO_(3)^(‒)-N)from live-stock manure.The high total P(TP)was near the glacier,which was attributed to the transportation of glacial sediments into the river,and pH was another critical factor.N was the primary nutrient limiting factor for the growth of phytoplankton in river water.Although the migration and transport of nutrients have altered with climate change,river water quality is good in alpine mountains based on an overall evaluation.These findings contribute to enriching nutrient datasets and highlight the importance of water resource management and water quality assessment in sensitive and fragile alpine mountains.展开更多
Continual learning fault diagnosis(CLFD)has gained growing interest in mechanical systems for its ability to accumulate and transfer knowledge in dynamic fault diagnosis scenarios.However,existing CLFD methods typical...Continual learning fault diagnosis(CLFD)has gained growing interest in mechanical systems for its ability to accumulate and transfer knowledge in dynamic fault diagnosis scenarios.However,existing CLFD methods typically assume balanced task distributions,neglecting the long-tailed nature of real-world fault occurrences,where certain faults dominate while others are rare.Due to the long-tailed distribution among different me-chanical conditions,excessive attention has been focused on the dominant type,leading to performance de-gradation in rarer types.In this paper,decoupling incremental classifier and representation learning(DICRL)is proposed to address the dual challenges of catastrophic forgetting introduced by incremental tasks and the bias in long-tailed CLFD(LT-CLFD).The core innovation lies in the structural decoupling of incremental classifier learning and representation learning.An instance-balanced sampling strategy is employed to learn more dis-criminative deep representations from the exemplars selected by the herding algorithm and new data.Then,the previous classifiers are frozen to prevent damage to representation learning during backward propagation.Cosine normalization classifier with learnable weight scaling is trained using a class-balanced sampling strategy to enhance classification accuracy.Experimental results demonstrate that DICRL outperforms existing continual learning methods across multiple benchmarks,demonstrating superior performance and robustness in both LT-CLFD and conventional CLFD.DICRL effectively tackles both catastrophic forgetting and long-tailed distribution in CLFD,enabling more reliable fault diagnosis in industrial applications.展开更多
Climate change disrupts the distribution of species and restructures their richness patterns.The genus of Asian bamboo,Phyllostachys,possesses significant ecological and economic values,and represents the most species...Climate change disrupts the distribution of species and restructures their richness patterns.The genus of Asian bamboo,Phyllostachys,possesses significant ecological and economic values,and represents the most speciesrich genus in the Bambusoideae subfamily.Based on the distribution data of 46 species and 20 environmental variables,we used the MaxEnt model combined with ArcGIS calculations to simulate current and future potential richness distributions under three distinct CO_(2) emission scenarios.The results showed that the MaxEnt model had a good predictive ability,with a mean area under the working characteristic curve(AUC value)of 0.91 for all species.The main environmental variables that impacted the future distribution of most Phyllostachys species were elevation,variations of seasonal precipitation,and mean diurnal range.Phyllostachys species are currently concentrated in southeastern China.Under future climate projections,18 species exhibited significant habitat contraction across three or more future climate scenarios,but suitable habitats for other species will expand.This enhancement is most pronounced under the extreme climate scenario(2090s-SSP585),primarily driven by high species gains contributing to elevated turnover values across scenarios.The center of maximum richness will progressively shift southwestward over time.Predictive modeling of Phyllostachys richness distribution dynamics under climate change enhances our understanding of its biogeography and informs strategic introduction programs to bamboo management and augments China’s carbon sequestration capacity.展开更多
To address the high costs and operational instability of distribution networks caused by the large-scale integration of distributed energy resources(DERs)(such as photovoltaic(PV)systems,wind turbines(WT),and energy s...To address the high costs and operational instability of distribution networks caused by the large-scale integration of distributed energy resources(DERs)(such as photovoltaic(PV)systems,wind turbines(WT),and energy storage(ES)devices),and the increased grid load fluctuations and safety risks due to uncoordinated electric vehicles(EVs)charging,this paper proposes a novel dual-scale hierarchical collaborative optimization strategy.This strategy decouples system-level economic dispatch from distributed EV agent control,effectively solving the resource coordination conflicts arising from the high computational complexity,poor scalability of existing centralized optimization,or the reliance on local information decision-making in fully decentralized frameworks.At the lower level,an EV charging and discharging model with a hybrid discrete-continuous action space is established,and optimized using an improved Parameterized Deep Q-Network(PDQN)algorithm,which directly handles mode selection and power regulation while embedding physical constraints to ensure safety.At the upper level,microgrid(MG)operators adopt a dynamic pricing strategy optimized through Deep Reinforcement Learning(DRL)to maximize economic benefits and achieve peak-valley shaving.Simulation results show that the proposed strategy outperforms traditional methods,reducing the total operating cost of the MG by 21.6%,decreasing the peak-to-valley load difference by 33.7%,reducing the number of voltage limit violations by 88.9%,and lowering the average electricity cost for EV users by 15.2%.This method brings a win-win result for operators and users,providing a reliable and efficient scheduling solution for distribution networks with high renewable energy penetration rates.展开更多
Nonlinear static procedures are widely adopted in structural engineering practice for seismic performance assessment due to their simplicity and computational efficiency.However,their reliability depends heavily on ho...Nonlinear static procedures are widely adopted in structural engineering practice for seismic performance assessment due to their simplicity and computational efficiency.However,their reliability depends heavily on how the nonlinear behaviour of structural components is represented.The recent earthquakes in Albania(2019)and Türkiye(2023)have underscored the need for accurate assessment techniques,particularly for older reinforced concrete buildings with poor detailing.This study quantifies the discrepancies between default and user-defined component modelling in pushover analysis of pre-modern reinforced concrete structures,analysing two representative low-and mid-rise reinforced concrete frame buildings.The lumped plasticity approach incorporates moment-rotation relationships derived from actual member properties and reinforcement configurations,while the distributed plasticity approach uses software-generated default properties based on modern codes.Results show that the distributed plasticity models systematically overestimate both the strength and the deformation capacity by up to 35%compared to lumped plasticity models,especially in buildings with poor detailing and low concrete strength.These findings demonstrate that default software procedures,widely used in practice but not validated for pre-modern structures,produce dangerously unconservative seismic performance estimates.The study provides quantitative evidence of the critical need for tailored modelling strategies that reflect the actual conditions of the existing building stock.展开更多
An MW6.0 earthquake struck Jishishan County in Linxia Prefecture,Gansu Province,on December 18,2023.In this research,Sentinel-1A satellite radar observations were used to obtain the field of coseismic deformation of t...An MW6.0 earthquake struck Jishishan County in Linxia Prefecture,Gansu Province,on December 18,2023.In this research,Sentinel-1A satellite radar observations were used to obtain the field of coseismic deformation of the Jishishan earthquake in 2023,and the geometric and fine slip distribution of the seismogenic fault were inverted using this as a constraint.The results show that the earthquake is characterized by thrust movement.The coseismic slip distribution results show that the maximum slip of this earthquake is 0.3 m.The Coulomb stress distribution shows that the whole section of the southern edge of Lajishan fault,the NWW trending segment of the northern edge of Lajishan fault and its NNW trending segment to the south of the epicenter,the northern edge of the West Qinling fault and the segment to the east of the epicenter of the Daotanghe Linxia fault are under stress loading,which indicates an increase in the potential risk of earthquakes.This research discussed the seismogenic characteristics of earthquakes and the tendency of faults.We speculate that the Jishishan earthquake is the result of the joint action of regional faults and tectonic stress.Based on the observation of seismic data,geodesy,and other geological and geophysical data,we believe that the earthquake was caused by the activation of weak areas under the crust by the local stress from the driving mechanism of the northeast expansion of Qinghai-Xizang Plateau.The seismogenic fault of this earthquake is more likely to be northeast dipping under the comprehensive consideration of various factors,which occurred on the concealed fault belonging to the eastern edge of the Jishishan fault zone.展开更多
This paper investigates the distributed continuoustime aggregative optimization problem for second-order multiagent systems,where the local cost function is not only related to its own decision variables,but also to t...This paper investigates the distributed continuoustime aggregative optimization problem for second-order multiagent systems,where the local cost function is not only related to its own decision variables,but also to the aggregation of the decision variables of all the agents.By using the gradient descent method,the distributed average tracking(DAT)technique and the time-base generator(TBG)technique,a distributed continuous-time aggregative optimization algorithm is proposed.Subsequently,the optimality of the system's equilibrium point is analyzed,and the convergence of the closed-loop system is proved using the Lyapunov stability theory.Finally,the effectiveness of the proposed algorithm is validated through case studies on multirobot systems and power generation systems.展开更多
The focus of this paper is on distributed average tracking(DAT)in the context of external disturbances,utilizing an event-triggered control mechanism.First,an event-triggered anti-disturbance DAT(ETAD-DAT)algorithm is...The focus of this paper is on distributed average tracking(DAT)in the context of external disturbances,utilizing an event-triggered control mechanism.First,an event-triggered anti-disturbance DAT(ETAD-DAT)algorithm is proposed to reduce communication load in networked control systems by redesigning existing anti-disturbance DAT algorithms and disturbance observers.Furthermore,a fully distributed event-triggering condition is employed to schedule event times for each agent.Simulation results demonstrate that the proposed ETAD-DAT algorithm is able to achieve accurate average tracking of multiple time-varying reference signals despite the presence of external disturbances,while the communication efficiency can be improved obviously.展开更多
The hybrid series-parallel microgrid attracts more attention by combining the advantages of both the series-stacked voltage and parallel-expanded capacity.Low-voltage distributed generations(DGs)are connected in serie...The hybrid series-parallel microgrid attracts more attention by combining the advantages of both the series-stacked voltage and parallel-expanded capacity.Low-voltage distributed generations(DGs)are connected in series to form the intra-string,and then multiple strings are interconnected in parallel.For the existing control strategies,both intra-string and inter-string depend on the centralized or distributed control with high communication reliance.It has limited scalability and redundancy under abnormal conditions.Alternatively,in this study,an intra-string distributed and inter-string decentralized control framework is proposed.Within the string,a few DGs close to the AC bus are the leaders to get the string power information and the rest DGs are the followers to acquire the synchronization information through the droop-based distributed consistency.Specifically,the output of the entire string has the active power−angular frequency(ω-P)droop characteristic,and the decentralized control among strings can be autonomously guaranteed.Moreover,the secondary control is designed to realize multi-mode objectives,including on/off-grid mode switching,grid-connected power interactive management,and off-grid voltage quality regulation.As a result,the proposed method has the ability of plug-and-play capabilities,single-point failure redundancy,and seamless mode-switching.Experimental results are provided to verify the effectiveness of the proposed practical solution.展开更多
Giant kelp Macrocystis pyrifera,an important foundation species with great ecological and economic value,is threatened by climate change.To better understand the impact of climate warming on M.pyrifera,we investigated...Giant kelp Macrocystis pyrifera,an important foundation species with great ecological and economic value,is threatened by climate change.To better understand the impact of climate warming on M.pyrifera,we investigated its global distribution dynamics by an optimized species distribution model(SDM).Results showed that wave height,sea surface temperature,benthic temperature,and benthic phosphate concentration were key factors shaping the distribution of M.pyrifera.In addition to currently known distribution regions,the model revealed potential suitable habitats globally.Under future climate scenarios,the habitat suitability of M.pyrifera would decrease at low latitudes and increase at high latitudes,resulting in a poleward shift of suitable habitats.In the regions currently occupied by M.pyrifera,the high suitable habitats were predicted to shrink,which implies that the existing M.pyrifera would be adversely impacted.These results serve as references for the conservation and utilization of M.pyrifera resource.展开更多
This study examined non-uniform loading in goaf cantilever rock masses via testing,modeling,and mechanical analysis to solve instantaneous fracture and section buckling from mining abutment pressure.The study investig...This study examined non-uniform loading in goaf cantilever rock masses via testing,modeling,and mechanical analysis to solve instantaneous fracture and section buckling from mining abutment pressure.The study investigates the non-uniform load gradient effect on fracture characteristics,including load characteristics,fracture location,fracture distribution,and section roughness.A digital model for fracture interface buckling analysis was developed,elucidating the influence of non-uniform load gradients on Fracture Interface Curvature(FIC),Buckling Rate of Change(BRC),and Buckling Domain Field(BDF).The findings reveal that nonlinear tensile stress concentration and abrupt tensile-compressive-shear strain mutations under non-uniform loading are fundamental mechanisms driving fracture path buckling in cantilever rock mass structures.The buckling process of rock mass under non-uniform load can be divided into two stages:low load gradient and high gradient load.In the stage of low gradient load,the buckling behavior is mainly reflected in the compression-shear fracture of the edge.In the stage of high gradient load,a buckling band along the loading direction is gradually formed in the rock mass.These buckling principles establish a theoretical basis for accurately characterizing bearing fractures,fracture interface instability,and vibration sources within overlying cantilever rock masses in goaf.展开更多
Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the ...Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the configuration of photovoltaic(3.8 MW),wind power(2.5 MW),energy storage(2.2 MWh),and SVC(1.2 Mvar)through interaction between upper and lower layers,and modifies lines 2–3,8–9,etc.to improve transmission capacity and voltage stability.The author uses normal distribution and Monte Carlo method to model load uncertainty,and combines Weibull distribution to describe wind speed characteristics.Compared to the traditional three-layer model(TLM),Benders decomposition-based two-layer model(BLBD)has a 58.1%reduction in convergence time(5.36 vs.12.78 h),a 51.1%reduction in iteration times(23 vs.47 times),a 8.07%reduction in total cost(12.436 vs.13.528 million yuan),and a 9.62%reduction in carbon emissions(12,456 vs.13,782 t).After optimization,the peak valley difference decreased from4.1 to 2.9MW,the renewable energy consumption rate reached 93.4%,and the energy storage efficiency was 87.6%.Themodel has been validated in the IEEE 33 node system,demonstrating its superiority in terms of economy,low-carbon,and reliability.展开更多
A multi-stage stress relaxation test was performed on a granodiorite sample to understand the deformation process prior to the macroscopic failure of brittle rocks,as well as the transient response during stress relax...A multi-stage stress relaxation test was performed on a granodiorite sample to understand the deformation process prior to the macroscopic failure of brittle rocks,as well as the transient response during stress relaxation.Distributed optical fiber sensing was used to measure strains across the sample surface by helically wrapping the single-mode fiber around the cylindrical sample.Close agreement was observed between the circumferential strains obtained from the optical fibers and the extensometer.The reconstructed full-field strain contours show strain heterogeneity from the crack closure phase,and the strains in the later deformation phase are dominantly localized within the former high-strain zone.The Gini coefficient was used to quantify the degree of strain localization and shows an initial increase during the crack closure phase,a decrease during the linear elastic phase,and a subsequent increase during the post-yielding phase.This behavior corresponds to a process of initial localization from an imperfect boundary condition,homogenization,and eventual relocalization prior to the macroscopic failure of the sample.The transient strain rate decay during the stress relaxation phase was quantified using the p-value in the“Omori-like"power law function.A higher initial stress at the onset of relaxation results in a lower p-value,indicating a slower strain rate decay.As the sample approaches macroscopic failure,the lowest p-value shifts from the most damaged zone to adjacent areas,suggesting stress redistribution or crack propagation in deformed crystalline rocks under stress relaxation conditions.展开更多
Air conditioning is a major energy-consuming component in buildings,and accurate air conditioning load forecasting is of great significance for maximizing energy utilization efficiency.However,the deep learning models...Air conditioning is a major energy-consuming component in buildings,and accurate air conditioning load forecasting is of great significance for maximizing energy utilization efficiency.However,the deep learning models currently used in the field of air conditioning load forecasting often suffer from issues such as distribution bias in load data and insufficient expression ability of nonlinear features in the model,which affect the accuracy of load forecasting.To address this,this paper proposes a novel load forecasting model.Firstly,the model employs the Dish-TS(DS)module to standardize the input window data through self-learning standardized parameters,thereby addressing the spatial intra-bias problem existing between data.Secondly,DS-Kansformer introduces Kolmogorov-Arnold Networks(KANs)to enhance the expression ability of nonlinear features.Finally,the output window is denormalized through the self-learning parameter of the DS module to restore the original distribution of the predicted data.In this paper,experiments were carried out based on the air-conditioning load dataset collected from a multi-functional comprehensive building,and the experimental results show that after adding the DS module,the Mean Absolute Error(MAE),Root Mean Square Error(RMSE),and R-squared(R^(2))of the model are 20.46%,34.44%,and 92.61%,respectively;after introducing KAN,the MAE,RMSE,and R^(2) are 22.81%,35.72%,and 92.05%,respectively;the model also exhibits high prediction accuracy after integrating the two modules(with RMSE,MAE,and R^(2) being 19.75%,34.05%,and 92.78%,respectively),outperforming common time series prediction models,confirming the reliability and efficiency of the model,which can provide reliable support for intelligent energy management in buildings.展开更多
基金National Natural Science Foundation of China(12125509,11961141003,12275361,U2267205,12175152,12175121)National Key Research and Development Project(2022YFA1602301)Continuous-support Basic Scientific Research Project。
文摘To generate a neutron beam exhibiting a Maxwellian energy distribution with narrow emission angles for measuring the neutron capture reaction rates of the s-process nuclides,a monoenergetic 3.4 MeV proton beam produced by the tandem-accelerator in the China Institute of Atomic Energy was utilized.The proton beam was first transmitted through a 60.5μm aluminum foil and then impinged on a natural LiF target to produce neutron beam via^(7)Li(p,n)7Be reaction.The quasi-Gaussian energy distribution of protons in the LiF target resulted in neutron energy spectra that agreed with a Maxwellian energy distribution at kT=(22±2)keV,which was achieved by integrating neutrons detected within an emission angle of 65.0°±2.6°using a ^(6)Li glass detector positioned at 65°relative to the proton beam direction.The narrow angular spread of the Maxwelliandistributed neutron beam enables direct measurement of neutron capture cross-sections for most s-process nuclides,overcoming previous experimental limitations associated with broad angular distributions.
基金supported in part by the National Natural Science Foundation of China(62522313,62473207,U25A20301)the Fundamental Research Funds for the Central Universities(2024SMECP03)。
文摘Dear Editor,This letter addresses the challenge of achieving robust global coordination in multi-agent systems(MASs)subject to heterogeneous actuator saturation and additive input disturbances.We develop a novel distributed control framework that strategically integrates a redesigned saturation function to handle the nonlinear actuator constraint and a high-gain feedback mechanism for effective disturbance rejection.
基金supported by Integrated Distribution Network Planning and Operational Enhancement Using Flexibility Domains Under Deep Human-Vehicle-Charger-Road-Grid Coupling(U22B20105).
文摘Thermal storage electric heating(TSEH),as a prevalent variable load resource,offers significant potential for enhancing system flexibility when aggregated into a cluster.To address the uncertainties of renewable energy and load forecasting in active distribution networks(ADN),this paper proposes a multi-timescale coordinated optimal dispatch strategy that incorporates TSEH clusters.It utilizes the thermal storage characteristics and short-term regulation capabilities of TSEH,along with the rapid and gradual response characteristics of resources in active distribution grids,to develop a coordinated optimization dispatch mechanism for day-ahead,intraday,and real-time stages.It provides a coordinated optimized dispatch technique across several timescales for active distribution grids,taking into account the integration of TSEH clusters.The proposed method is validated on a modified IEEE 33-node system.Simulation results demonstrate that the participation of TSEH in collaborative optimization significantly reduces the total system operating cost by 8.71%compared to the scenario without TSEH.This cost reduction is attributed to a 10.84%decrease in interaction costs with the main grid and a 47.41%reduction in network loss costs,validating effective peak shaving and valley filling.The multi-timescale framework further enhances economic efficiency,with overall operating costs progressively decreasing by 3.91%(intraday)and 4.59%(real-time),and interaction costs further reduced by 5.34%and 9.25%,respectively.Moreover,the approach enhances system stability by effectively suppressing node voltage fluctuations and ensuring all voltages remain within safe operating limits during real-time operation.Therefore,the proposed approach achieves rational coordination of diverse resources,significantly improving the economic efficiency and stability of ADNs.
文摘With the rapid development of generative artificial intelligence(GenAI),the task of story visualization,which transforms natural language narratives into coherent and consistent image sequences,has attracted growing research attention.However,existing methods still face limitations in balancing multi-frame character consistency and generation efficiency,which restricts their feasibility for large-scale practical applications.To address this issue,this study proposes a modular cloud-based distributed system built on Stable Diffusion.By separating the character generation and story generation processes,and integratingmulti-feature control techniques,a cachingmechanism,and an asynchronous task queue architecture,the system enhances generation efficiency and scalability.The experimental design includes both automated and human evaluations of character consistency,performance testing,and multinode simulation.The results show that the proposed system outperforms the baseline model StoryGen in both CLIP-I and human evaluation metrics.In terms of performance,under the experimental environment of this study,dual-node deployment reduces average waiting time by approximately 19%,while the four-node simulation further reduces it by up to 65%.Overall,this study demonstrates the advantages of cloud-distributed GenAI in maintaining character consistency and reducing generation latency,highlighting its potential value inmulti-user collaborative story visualization applications.
基金supported by ScientificResearch Fund of National Health Commission of the People’s Republic of China-Major Science and Technology Program for Medicine and Health in Zhejiang Province(WKJ-ZJ-2406).
文摘Objectives This study aimed to explore the lagged and cumulative effects of risk factors on disability in older adults using distributed lag non-linear models(DLNMs).Methods We utilized data from the China Health and Retirement Longitudinal Study(CHARLS).After feature selection via Elastic Net Regularization,we applied DLNMs to evaluate the lagged effects of risk factors.Disability was defined as the presence of any difficulties in basic activities of daily living(BADL).The cumulative relative risk(CRR)was calculated by summing the lag-specific risk estimates,representing the cumulative disability risk over the specified lag period.Effect modifications and sensitivity analyses were also performed.Results This study included a total of 2,318 participants.Early-phase lag factors,such as the difficulty in stooping(CRR=3.58;95%CI:2.31-5.55;P<0.001)and walking(CRR=2.77;95%CI:1.39-5.55;P<0.001),exerted the strongest effects immediately upon occurrence.Mid-phase lag factors,such as arthritis(CRR=1.51;95%CI:1.10-2.06;P=0.001),showed a resurgence in disability risk within 2-3 years.Late-phase lag factors,including depressive symptoms(CRR=2.38;95%CI:1.30-4.35;P<0.001)and elevated systolic blood pressure(CRR=1.64;95%CI:1.06-2.79;P=0.02),exhibited significant long-term cumulative risks.Conversely,grip strength(CRR=0.80;95%CI:0.54-0.95;P=0.02)and social participation(CRR=0.89;95%CI:0.73-0.99;P=0.04)were significant protective factors.Conclusions The findings underscore the importance of tailored interventions that account for various lag characteristics of different factors to effectively mitigate disability risk.Future studies should explore the underlying biological and sociological mechanisms of these lagged effects,identify intervention strategies that target risk factors with different lagged patterns,and evaluate their effectiveness.
基金the Chinese Academy of Sciences Research Center for Ecology and Environment of Central Asia(RCEECA),the construction and joint research for the China-Tajikistan“Belt and Road”Joint Laboratory on Biodiversity Conservation and Sustainable Use(2024YFE0214200)the Shanghai Cooperation Organization Partnership and International Technology Cooperation Plan of Science and Technology Projects(2023E01018,2025E01056)the Chinese Academy of Sciences President’s International Fellowship Initiative(PIFI)(2024VBC0006).
文摘Tajikistan represents a core region of the biodiversity hotspot in Central Asian mountains and has exceptional vascular plant diversity.However,the species diversity of the country faces urgent conservation challenges.There has been a lack of a comprehensive and multidimensional assessment to inform strategic conservation planning.Therefore,this study integrated 4 key biodiversity indices including species richness(SR),phylogenetic diversity(PD),threatened species richness(TSR),and endemic species richness(ESR)to map species diversity distribution patterns,identify conservation gaps,and elucidate their effects of climatic factors.This study revealed that species diversity shows a clear trend of decreasing from the western region to the eastern region of Tajikistan.The central–western mountains(specifically the Gissar-Darvasian and Zeravshanian regions)emerge as irreplaceable biodiversity hotspots.However,we found a severe spatial mismatch between these priority areas and the existing protected areas(PAs).Protection coverage for all hotspots was alarmingly low,ranging from 31.00%to 38.00%.Consequently,a critical 64.80%of integrated priority areas fall outside of the current PAs,representing a major conservation gap.This study identified precipitation seasonality and isothermality as the principal drivers,collectively explaining over 50.00%of the diversity variation and suggesting high vulnerability to hydrological shifts.Furthermore,we detected significant geographic sampling bias in the public biodiversity databases,with the most critical hotspot being systematically under-sampled.This study provides a robust scientific basis for conservation action,highlighting the urgent need to strategically expand PAs in the under-protected southwestern region and to mitigate critical sampling gaps through targeted data digitization and field surveys.These measures are indispensable for securing Tajikistan’s unique biodiversity and achieving the Kunming-Montreal Global Biodiversity Framework Target 3(“30×30 Protection”).
基金supported by the Second Tibetan Plateau Scientific Expedition and Research Program(STEP)(No.2019QZKK0208)the National Natural Science Foundation of China(Nos.42171148 and 42330512)the Key R&D Project from the Science and Technology Department of Tibet(No.XZ202501ZY0030).
文摘Nitrogen(N)and phosphorus(P)are essential nutrients and can significantly impact primary productivity of the ecosystem causing water environmental problems.However,their cycling mechanisms are not well understood in alpine mountains with climate change.Hence,94 samples of river water were collected from 2018 to 2020 in the headwaters of the Shule River Basin to assess the nutrients spatiotemporal distribution and combined ap-proach of water quality index to assess water quality and potential sources.The findings depict that high nutrient concentrations were found to coincide with snowmelt and glacial meltwater and rainfall recharge periods,while total flux peaked from June to September due to increased runoff.Notably,total nitrogen(TN)concentrations were significantly higher near the town,primarily attributed to the replenishment of nitrate(NO_(3)^(‒)-N)from live-stock manure.The high total P(TP)was near the glacier,which was attributed to the transportation of glacial sediments into the river,and pH was another critical factor.N was the primary nutrient limiting factor for the growth of phytoplankton in river water.Although the migration and transport of nutrients have altered with climate change,river water quality is good in alpine mountains based on an overall evaluation.These findings contribute to enriching nutrient datasets and highlight the importance of water resource management and water quality assessment in sensitive and fragile alpine mountains.
基金Supported by National Natural Science Foundation of China(Grant No.52272440)Suzhou Science Foundation(Grant Nos.SYG202323,ZXL2022027).
文摘Continual learning fault diagnosis(CLFD)has gained growing interest in mechanical systems for its ability to accumulate and transfer knowledge in dynamic fault diagnosis scenarios.However,existing CLFD methods typically assume balanced task distributions,neglecting the long-tailed nature of real-world fault occurrences,where certain faults dominate while others are rare.Due to the long-tailed distribution among different me-chanical conditions,excessive attention has been focused on the dominant type,leading to performance de-gradation in rarer types.In this paper,decoupling incremental classifier and representation learning(DICRL)is proposed to address the dual challenges of catastrophic forgetting introduced by incremental tasks and the bias in long-tailed CLFD(LT-CLFD).The core innovation lies in the structural decoupling of incremental classifier learning and representation learning.An instance-balanced sampling strategy is employed to learn more dis-criminative deep representations from the exemplars selected by the herding algorithm and new data.Then,the previous classifiers are frozen to prevent damage to representation learning during backward propagation.Cosine normalization classifier with learnable weight scaling is trained using a class-balanced sampling strategy to enhance classification accuracy.Experimental results demonstrate that DICRL outperforms existing continual learning methods across multiple benchmarks,demonstrating superior performance and robustness in both LT-CLFD and conventional CLFD.DICRL effectively tackles both catastrophic forgetting and long-tailed distribution in CLFD,enabling more reliable fault diagnosis in industrial applications.
基金supported by the National Science Foundation of China(32201643)the Key Research Projects of Yibin,research and integrated demonstration and key technologies for smart bamboo industry(YBZD2024-1).
文摘Climate change disrupts the distribution of species and restructures their richness patterns.The genus of Asian bamboo,Phyllostachys,possesses significant ecological and economic values,and represents the most speciesrich genus in the Bambusoideae subfamily.Based on the distribution data of 46 species and 20 environmental variables,we used the MaxEnt model combined with ArcGIS calculations to simulate current and future potential richness distributions under three distinct CO_(2) emission scenarios.The results showed that the MaxEnt model had a good predictive ability,with a mean area under the working characteristic curve(AUC value)of 0.91 for all species.The main environmental variables that impacted the future distribution of most Phyllostachys species were elevation,variations of seasonal precipitation,and mean diurnal range.Phyllostachys species are currently concentrated in southeastern China.Under future climate projections,18 species exhibited significant habitat contraction across three or more future climate scenarios,but suitable habitats for other species will expand.This enhancement is most pronounced under the extreme climate scenario(2090s-SSP585),primarily driven by high species gains contributing to elevated turnover values across scenarios.The center of maximum richness will progressively shift southwestward over time.Predictive modeling of Phyllostachys richness distribution dynamics under climate change enhances our understanding of its biogeography and informs strategic introduction programs to bamboo management and augments China’s carbon sequestration capacity.
基金supported in part by the Research on Key Technologies for the Development of an Active Balancing Cooperative Control Systemfor Distribution Networks and the National Natural Science Foundation of China under Grant 521532240029,Grant 62303006.
文摘To address the high costs and operational instability of distribution networks caused by the large-scale integration of distributed energy resources(DERs)(such as photovoltaic(PV)systems,wind turbines(WT),and energy storage(ES)devices),and the increased grid load fluctuations and safety risks due to uncoordinated electric vehicles(EVs)charging,this paper proposes a novel dual-scale hierarchical collaborative optimization strategy.This strategy decouples system-level economic dispatch from distributed EV agent control,effectively solving the resource coordination conflicts arising from the high computational complexity,poor scalability of existing centralized optimization,or the reliance on local information decision-making in fully decentralized frameworks.At the lower level,an EV charging and discharging model with a hybrid discrete-continuous action space is established,and optimized using an improved Parameterized Deep Q-Network(PDQN)algorithm,which directly handles mode selection and power regulation while embedding physical constraints to ensure safety.At the upper level,microgrid(MG)operators adopt a dynamic pricing strategy optimized through Deep Reinforcement Learning(DRL)to maximize economic benefits and achieve peak-valley shaving.Simulation results show that the proposed strategy outperforms traditional methods,reducing the total operating cost of the MG by 21.6%,decreasing the peak-to-valley load difference by 33.7%,reducing the number of voltage limit violations by 88.9%,and lowering the average electricity cost for EV users by 15.2%.This method brings a win-win result for operators and users,providing a reliable and efficient scheduling solution for distribution networks with high renewable energy penetration rates.
文摘Nonlinear static procedures are widely adopted in structural engineering practice for seismic performance assessment due to their simplicity and computational efficiency.However,their reliability depends heavily on how the nonlinear behaviour of structural components is represented.The recent earthquakes in Albania(2019)and Türkiye(2023)have underscored the need for accurate assessment techniques,particularly for older reinforced concrete buildings with poor detailing.This study quantifies the discrepancies between default and user-defined component modelling in pushover analysis of pre-modern reinforced concrete structures,analysing two representative low-and mid-rise reinforced concrete frame buildings.The lumped plasticity approach incorporates moment-rotation relationships derived from actual member properties and reinforcement configurations,while the distributed plasticity approach uses software-generated default properties based on modern codes.Results show that the distributed plasticity models systematically overestimate both the strength and the deformation capacity by up to 35%compared to lumped plasticity models,especially in buildings with poor detailing and low concrete strength.These findings demonstrate that default software procedures,widely used in practice but not validated for pre-modern structures,produce dangerously unconservative seismic performance estimates.The study provides quantitative evidence of the critical need for tailored modelling strategies that reflect the actual conditions of the existing building stock.
基金National Natural Science Foundation of China(Grant Nos.41930101 and 42101096)the China Postdoctoral Science Foundation(No.2019M660091XB)+8 种基金the Key Research and Development Project of Ecological Civilization Construction in Gansu Province(No.24YFFA054)the Natural Science Foundation of Gansu Province(Grant Nos.23JRRA857,23JRRG0015,and 21JR7RA317)the Gansu Province Higher Education Institutions Young Doctor(2024QB-046)the Open Fund of Wuhan,Gravitational Field and Solid Tides,National Field Observation and Research Station(WHYWZ202403)the National Cryosphere Desert Data Center(No.E01Z790201/2021kf07)the Lanzhou Talent Innovation and Entrepreneurship(No.2022-RC-73)the Experimental Teaching Reform Project of Lanzhou Jiaotong University(2024002)the Undergraduate Teaching Reform Project of Lanzhou Jiaotong University(JGY202416)"Young Scientific and Technological Talents Supporting Project"Project of Gansu Province(Li Wei)。
文摘An MW6.0 earthquake struck Jishishan County in Linxia Prefecture,Gansu Province,on December 18,2023.In this research,Sentinel-1A satellite radar observations were used to obtain the field of coseismic deformation of the Jishishan earthquake in 2023,and the geometric and fine slip distribution of the seismogenic fault were inverted using this as a constraint.The results show that the earthquake is characterized by thrust movement.The coseismic slip distribution results show that the maximum slip of this earthquake is 0.3 m.The Coulomb stress distribution shows that the whole section of the southern edge of Lajishan fault,the NWW trending segment of the northern edge of Lajishan fault and its NNW trending segment to the south of the epicenter,the northern edge of the West Qinling fault and the segment to the east of the epicenter of the Daotanghe Linxia fault are under stress loading,which indicates an increase in the potential risk of earthquakes.This research discussed the seismogenic characteristics of earthquakes and the tendency of faults.We speculate that the Jishishan earthquake is the result of the joint action of regional faults and tectonic stress.Based on the observation of seismic data,geodesy,and other geological and geophysical data,we believe that the earthquake was caused by the activation of weak areas under the crust by the local stress from the driving mechanism of the northeast expansion of Qinghai-Xizang Plateau.The seismogenic fault of this earthquake is more likely to be northeast dipping under the comprehensive consideration of various factors,which occurred on the concealed fault belonging to the eastern edge of the Jishishan fault zone.
基金supported by the National Key Research and Development Program of China(2025YFE0213100)the National Natural Science Foundation of China(62422315,62573348)+1 种基金the Natural Science Basic Research Program of Shaanxi(2025JC-YBMS-667)the“Shuang Yi Liu”Construction Foundation(25GH02010366)。
文摘This paper investigates the distributed continuoustime aggregative optimization problem for second-order multiagent systems,where the local cost function is not only related to its own decision variables,but also to the aggregation of the decision variables of all the agents.By using the gradient descent method,the distributed average tracking(DAT)technique and the time-base generator(TBG)technique,a distributed continuous-time aggregative optimization algorithm is proposed.Subsequently,the optimality of the system's equilibrium point is analyzed,and the convergence of the closed-loop system is proved using the Lyapunov stability theory.Finally,the effectiveness of the proposed algorithm is validated through case studies on multirobot systems and power generation systems.
基金part supported by the National Natural Science Foundation(62203034,62273126,62203035)the Ling-Yan Research and Development Project of Zhejiang Province of China(2023C03185)。
文摘The focus of this paper is on distributed average tracking(DAT)in the context of external disturbances,utilizing an event-triggered control mechanism.First,an event-triggered anti-disturbance DAT(ETAD-DAT)algorithm is proposed to reduce communication load in networked control systems by redesigning existing anti-disturbance DAT algorithms and disturbance observers.Furthermore,a fully distributed event-triggering condition is employed to schedule event times for each agent.Simulation results demonstrate that the proposed ETAD-DAT algorithm is able to achieve accurate average tracking of multiple time-varying reference signals despite the presence of external disturbances,while the communication efficiency can be improved obviously.
基金supported by the Smart Grid-National Science and Technology Major Project(2025ZD0804500)the National Natural Science Foundation of China under Grant 52307232the Hunan Provincial Natural Science Foundation of China under Grant 2024JJ4055.
文摘The hybrid series-parallel microgrid attracts more attention by combining the advantages of both the series-stacked voltage and parallel-expanded capacity.Low-voltage distributed generations(DGs)are connected in series to form the intra-string,and then multiple strings are interconnected in parallel.For the existing control strategies,both intra-string and inter-string depend on the centralized or distributed control with high communication reliance.It has limited scalability and redundancy under abnormal conditions.Alternatively,in this study,an intra-string distributed and inter-string decentralized control framework is proposed.Within the string,a few DGs close to the AC bus are the leaders to get the string power information and the rest DGs are the followers to acquire the synchronization information through the droop-based distributed consistency.Specifically,the output of the entire string has the active power−angular frequency(ω-P)droop characteristic,and the decentralized control among strings can be autonomously guaranteed.Moreover,the secondary control is designed to realize multi-mode objectives,including on/off-grid mode switching,grid-connected power interactive management,and off-grid voltage quality regulation.As a result,the proposed method has the ability of plug-and-play capabilities,single-point failure redundancy,and seamless mode-switching.Experimental results are provided to verify the effectiveness of the proposed practical solution.
基金Supported by the National Key Research and Development Program of China(No.2023YFD2400800)the Laoshan Laboratory(Nos.LSKJ202203801,LSKJ202203204)+4 种基金the Natural Science Foundation of Shandong Province(Nos.ZR2023MD127,ZR2021MD075)the Central Public-interest Scientific Institution Basal Research Fund CAFS(Nos.2023TD28,20603022023012)the National Natural Science Foundation of China(No.32373107)the China Agriculture Research System(No.CARS-50)the Taishan Scholars Program。
文摘Giant kelp Macrocystis pyrifera,an important foundation species with great ecological and economic value,is threatened by climate change.To better understand the impact of climate warming on M.pyrifera,we investigated its global distribution dynamics by an optimized species distribution model(SDM).Results showed that wave height,sea surface temperature,benthic temperature,and benthic phosphate concentration were key factors shaping the distribution of M.pyrifera.In addition to currently known distribution regions,the model revealed potential suitable habitats globally.Under future climate scenarios,the habitat suitability of M.pyrifera would decrease at low latitudes and increase at high latitudes,resulting in a poleward shift of suitable habitats.In the regions currently occupied by M.pyrifera,the high suitable habitats were predicted to shrink,which implies that the existing M.pyrifera would be adversely impacted.These results serve as references for the conservation and utilization of M.pyrifera resource.
基金support provided by the National Natural Science Foundation of China(No.52274077)the Natural Science Foundation of Henan(No.242300421072)+2 种基金the Youth Elite Teachers Cultivation Program for Higher Education Institutions in Henan Province(No.2024GGJS036)the Funds for Distinguished Young Scholars of Henan Polytechnic University(No.J2023-3)the Young Core Teacher Funding Scheme of Henan Polytechnic University(No.2023XQG-09).
文摘This study examined non-uniform loading in goaf cantilever rock masses via testing,modeling,and mechanical analysis to solve instantaneous fracture and section buckling from mining abutment pressure.The study investigates the non-uniform load gradient effect on fracture characteristics,including load characteristics,fracture location,fracture distribution,and section roughness.A digital model for fracture interface buckling analysis was developed,elucidating the influence of non-uniform load gradients on Fracture Interface Curvature(FIC),Buckling Rate of Change(BRC),and Buckling Domain Field(BDF).The findings reveal that nonlinear tensile stress concentration and abrupt tensile-compressive-shear strain mutations under non-uniform loading are fundamental mechanisms driving fracture path buckling in cantilever rock mass structures.The buckling process of rock mass under non-uniform load can be divided into two stages:low load gradient and high gradient load.In the stage of low gradient load,the buckling behavior is mainly reflected in the compression-shear fracture of the edge.In the stage of high gradient load,a buckling band along the loading direction is gradually formed in the rock mass.These buckling principles establish a theoretical basis for accurately characterizing bearing fractures,fracture interface instability,and vibration sources within overlying cantilever rock masses in goaf.
文摘Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the configuration of photovoltaic(3.8 MW),wind power(2.5 MW),energy storage(2.2 MWh),and SVC(1.2 Mvar)through interaction between upper and lower layers,and modifies lines 2–3,8–9,etc.to improve transmission capacity and voltage stability.The author uses normal distribution and Monte Carlo method to model load uncertainty,and combines Weibull distribution to describe wind speed characteristics.Compared to the traditional three-layer model(TLM),Benders decomposition-based two-layer model(BLBD)has a 58.1%reduction in convergence time(5.36 vs.12.78 h),a 51.1%reduction in iteration times(23 vs.47 times),a 8.07%reduction in total cost(12.436 vs.13.528 million yuan),and a 9.62%reduction in carbon emissions(12,456 vs.13,782 t).After optimization,the peak valley difference decreased from4.1 to 2.9MW,the renewable energy consumption rate reached 93.4%,and the energy storage efficiency was 87.6%.Themodel has been validated in the IEEE 33 node system,demonstrating its superiority in terms of economy,low-carbon,and reliability.
基金support of her postdoctoral research at the GFZ Helmholtz Centre for Geosciences.P.Pan acknowledges the financial support of the National Natural Science Foundation of China(Grant No.52339001)H.Hofmann and Y.Ji acknowledge the financial support of the Helmholtz Association's Initiative and Networking Fund for the Helmholtz Young Investigator Group ARES(contract number VH-NG-1516).
文摘A multi-stage stress relaxation test was performed on a granodiorite sample to understand the deformation process prior to the macroscopic failure of brittle rocks,as well as the transient response during stress relaxation.Distributed optical fiber sensing was used to measure strains across the sample surface by helically wrapping the single-mode fiber around the cylindrical sample.Close agreement was observed between the circumferential strains obtained from the optical fibers and the extensometer.The reconstructed full-field strain contours show strain heterogeneity from the crack closure phase,and the strains in the later deformation phase are dominantly localized within the former high-strain zone.The Gini coefficient was used to quantify the degree of strain localization and shows an initial increase during the crack closure phase,a decrease during the linear elastic phase,and a subsequent increase during the post-yielding phase.This behavior corresponds to a process of initial localization from an imperfect boundary condition,homogenization,and eventual relocalization prior to the macroscopic failure of the sample.The transient strain rate decay during the stress relaxation phase was quantified using the p-value in the“Omori-like"power law function.A higher initial stress at the onset of relaxation results in a lower p-value,indicating a slower strain rate decay.As the sample approaches macroscopic failure,the lowest p-value shifts from the most damaged zone to adjacent areas,suggesting stress redistribution or crack propagation in deformed crystalline rocks under stress relaxation conditions.
基金supported by the National Natural Science Foundation with grant No.12374408。
文摘Air conditioning is a major energy-consuming component in buildings,and accurate air conditioning load forecasting is of great significance for maximizing energy utilization efficiency.However,the deep learning models currently used in the field of air conditioning load forecasting often suffer from issues such as distribution bias in load data and insufficient expression ability of nonlinear features in the model,which affect the accuracy of load forecasting.To address this,this paper proposes a novel load forecasting model.Firstly,the model employs the Dish-TS(DS)module to standardize the input window data through self-learning standardized parameters,thereby addressing the spatial intra-bias problem existing between data.Secondly,DS-Kansformer introduces Kolmogorov-Arnold Networks(KANs)to enhance the expression ability of nonlinear features.Finally,the output window is denormalized through the self-learning parameter of the DS module to restore the original distribution of the predicted data.In this paper,experiments were carried out based on the air-conditioning load dataset collected from a multi-functional comprehensive building,and the experimental results show that after adding the DS module,the Mean Absolute Error(MAE),Root Mean Square Error(RMSE),and R-squared(R^(2))of the model are 20.46%,34.44%,and 92.61%,respectively;after introducing KAN,the MAE,RMSE,and R^(2) are 22.81%,35.72%,and 92.05%,respectively;the model also exhibits high prediction accuracy after integrating the two modules(with RMSE,MAE,and R^(2) being 19.75%,34.05%,and 92.78%,respectively),outperforming common time series prediction models,confirming the reliability and efficiency of the model,which can provide reliable support for intelligent energy management in buildings.
