To determine the effect of dissolution on pore network development in carbonate rocks, dissolution experiments, X-Ray microtomography, and thin section analysis were conducted on argillaceous limestone and grain limes...To determine the effect of dissolution on pore network development in carbonate rocks, dissolution experiments, X-Ray microtomography, and thin section analysis were conducted on argillaceous limestone and grain limestone samples at different temperatures and constant pH, HCl concentration. The relationship between Ca^(2+) concentration and time was revealed through the experiments; pore size distribution before and after dissolution indicate that there is no correlation between the temperature and pore size variation, but pore size variation in grain limestone is more significant, indicating that the variation is mainly controlled by the heterogeneity of the rock itself(initial porosity and permeability) and the abundance of unstable minerals(related to crystal shape, size and mineral type). At different temperatures, the two kinds of carbonate rocks had very small variation in pore throat radius from 0.003 mm to 0.040 mm, which is 1.3 to 3.5 times more, 1.7 on average of the original pore throat radius. Their pore throat length varied from 0.05 mm to 0.35 mm. The minor changes in the pore throat radius, length and connectivity brought big changes to permeability of up to 1 000×10^(-3) μm^2.展开更多
Due to seasonal climate alterations,the microstructure and permeability of granite residual soil are easily affected by multiple dry-wet cycles.The X-ray micro computed tomography(micro-CT)acted as a nondestructive to...Due to seasonal climate alterations,the microstructure and permeability of granite residual soil are easily affected by multiple dry-wet cycles.The X-ray micro computed tomography(micro-CT)acted as a nondestructive tool for characterizing the microstructure of soil samples exposed to a range of damage levels induced by dry-wet cycles.Subsequently,the variations of pore distribution and permeability due to drywet cycling effects were revealed based on three-dimensional(3D)pore distribution analysis and seepage simulations.According to the results,granite residual soils could be separated into four different components,namely,pores,clay,quartz,and hematite,from micro-CT images.The reconstructed 3D pore models dynamically demonstrated the expanding and connecting patterns of pore structures during drywet cycles.The values of porosity and connectivity are positively correlated with the number of dry-wet cycles,which were expressed by exponential and linear functions,respectively.The pore volume probability distribution curves of granite residual soil coincide with the χ^(2)distribution curve,which verifies the effectiveness of the assumption of χ^(2)distribution probability.The pore volume distribution curves suggest that the pores in soils were divided into four types based on their volumes,i.e.micropores,mesopores,macropores,and cracks.From a quantitative and visual perspective,considerable small pores are gradually transformed into cracks with a large volume and a high connectivity.Under the action of dry-wet cycles,the number of seepage flow streamlines which contribute to water permeation in seepage simulation increases distinctly,as well as the permeability and hydraulic conductivity.The calculated hydraulic conductivity is comparable with measured ones with an acceptable error margin in general,verifying the accuracy of seepage simulations based on micro-CT results.展开更多
Utilizing lightweight Al alloys in various industrial applications requires achieving precise pressure tightness and leak requirements.Vacuum pressure impregnation(VPI)with thermosetting polymers is commonly used to a...Utilizing lightweight Al alloys in various industrial applications requires achieving precise pressure tightness and leak requirements.Vacuum pressure impregnation(VPI)with thermosetting polymers is commonly used to address leakage defects in die-cast Al alloys.In this study,the efficacy of the VPI technique in sealing alloy parts was investigated using a combination of nondestructive micro X-ray computed tomography(micro XCT)and a standard leak test.The results demonstrate that the commonly used water leak test is insufficient for determining the sealing performance.Instead,micro XCT shows distinct advantages by enabling more comprehensive analysis.It reveals the presence of a low atomic number impregnates sealant within casting defects,which has low grey contrast and allows for visualizing primary leakage paths in 3D.The effective atomic number of impregnated resin is 6.75 and that of Al alloy is 13.69 by dual-energy X-ray CT.This research findings will contribute to enhancing the standard VPI process parameters and the properties of impregnating sealants to improve quality assurance for impregnation in industrial metals.展开更多
Micro porosity in aluminum alloys may contribute to fatigue life degradation, which can largely limit the application of alloys. Therefore, the fatigue life of a commercial 7050-T7451 thick plate and an experimental p...Micro porosity in aluminum alloys may contribute to fatigue life degradation, which can largely limit the application of alloys. Therefore, the fatigue life of a commercial 7050-T7451 thick plate and an experimental plate with different porosities was compared in this study. The X-ray computed tomography(XCT) was utilized to characterize the size, number density and spatial distribution of porosity inside various samples, and the fracture surface of fatigued specimens was compared by using scanning electron microscope(SEM). The results showed that the fatigue cracks prefer to initiate from constituent particles in the commercial alloy. Whereas the micro porosity is the predominant site for crack nucleation and subsequent failure in the experimental one. The presence of micro porosity in experimental7050-T7451 thick plate may reduce the fatigue life by an order of magnitude or more compared with the defect-free alloy. The pores close to sample surface are the main fatigue crack initiation site, among which larger and deeper pore leads to a shorter fatigue life. The crack initiation is also affected by the pore geometry and direction. Besides, the overall porosity inside the bulk can affect the crack propagation during fatigue tests.展开更多
The visualization and data mining of tumor multidimensional information may play a major role in the analysis of the growth,metastasis,and microenvironmental changes of tumors while challenging traditional imaging and...The visualization and data mining of tumor multidimensional information may play a major role in the analysis of the growth,metastasis,and microenvironmental changes of tumors while challenging traditional imaging and data processing techniques.In this study,a general trans-scale and multi-modality measurement method was developed for the quantitative diagnosis of hepatocellular carcinoma(HCC)using a combination of propagation-based phase-contrast computed tomography(PPCT),scanning transmission soft X-ray microscopy(STXM),and Fourier transform infrared micro-spectroscopy(FTIR).Our experimental results reveal the trans-scale micro-morpho-logical HCC pathology and facilitate quantitative data analysis and comprehensive assessment.These results include some visualization features of PPCT-based tissue microenvironments,STXM-based cellular fine structures,and FTIR-based bio-macromolecular spectral characteris-tics during HCC tumor differentiation and proliferation.The proposed method provides multidimensional feature data support for constructing a high-accuracy machine learning algorithm based on a gray-level histogram,gray-gradient co-occurrence matrix,gray-level co-occurrence matrix,and back-propagation neural network model.Multi-dimensional information analysis and diagnosis revealed the morphological pathways of HCC pathological evolution and we explored the relationships between HCC-related feature changes in inflammatory microenviron-ments,cellular metabolism,and the stretching vibration peaks of biomolecules of lipids,proteins,and nucleic acids.Therefore,the proposed methodology has strong potential for the visualization of complex tumors and assessing the risks of tumor differentiation and metastasis.展开更多
Changes in structure of oral solid dosage forms(OSDF)elementally determine the drug release and its therapeutic effects.In this research,synchrotron radiation X-ray micro-computed tomography was utilized to visualize ...Changes in structure of oral solid dosage forms(OSDF)elementally determine the drug release and its therapeutic effects.In this research,synchrotron radiation X-ray micro-computed tomography was utilized to visualize the 3 D structure of enteric coated pellets recovered from the gastrointestinal tract of rats.The structures of pellets in solid state and in vitro compendium media were measured.Pellets in vivo underwent morphological and structural changes which differed significantly from those in vitro compendium media.Thus,optimizations of the dissolution media were performed to mimic the appropriate in vivo conditions by introducing pepsin and glass microspheres in media.The sphericity,pellet volume,pore volume and porosity of the in vivo esomeprazole magnesium pellets in stomach for2 h were recorded 0.47,1.55×10^(8)μm^(3),0.44×10^(8)μm^(3)and 27.6%,respectively.After adding pepsin and glass microspheres,the above parameters in vitro reached to 0.44,1.64×10^(8)μm^(3)0.38×10^(8)μm^(3)and 23.0%,respectively.Omeprazole magnesium pellets behaved similarly.The structural features of pellets between in vitro media and in vivo condition were bridged successfully in terms of 3 D structures to ensure better design,characterization and quality control of advanced OSDF.展开更多
Thermal shocking effect occurs when the coalbed methane(CBM)reservoirs meet liquid nitrogen(LN2)of extremely low temperature.In this study,3D via X-ray microcomputer tomography(μCT)and scanning electron microscope(SE...Thermal shocking effect occurs when the coalbed methane(CBM)reservoirs meet liquid nitrogen(LN2)of extremely low temperature.In this study,3D via X-ray microcomputer tomography(μCT)and scanning electron microscope(SEM)are employed to visualize and quantify morphological evolution characteristics of fractures in coal after LN2 thermal shocking treatments.LN2 thermal shocking leads to a denser fracture network than its original state with coal porosity growth rate increasing up to 183.3%.The surface porosity of theμCT scanned layers inside the coal specimen is influenced by LN2 thermal shocking which rises from 18.76%to 215.11%,illustrating the deformation heterogeneity of coal after LN2 thermal shocking.The cracking effect of LN2 thermal shocking on the surface of low porosity is generally more effective than that of high surface porosity,indicating the applicability of LN2 thermal shocking on low-permeability CBM reservoir stimulation.The characteristics of SEM scanned coal matrix in the coal powder and the coal block after the LN2 thermal shocking presented a large amount of deep and shallow progressive scratch layers,fracture variation diversity(i.e.extension,propagation,connectivity,irregularity)on the surface of the coal block and these were the main reasons leading to the decrease of the uniaxial compressive strength of the coal specimen.展开更多
The Schwarz primitive triply periodic minimal surface(P-type TPMS)lattice structures are widely used.However,these lattice structures have weak load-bearing capacity compared with other cellular structures.In this pap...The Schwarz primitive triply periodic minimal surface(P-type TPMS)lattice structures are widely used.However,these lattice structures have weak load-bearing capacity compared with other cellular structures.In this paper,an adaptive enhancement design method based on the non-uniform stress distribution in structures with uniform thickness is proposed to design the P-type TPMS lattice structures with higher mechanical properties.Two types of structures are designed by adjusting the adaptive thickness distribution in the TPMS.One keeps the same relative density,and the other keeps the same of non-enhanced region thickness.Compared with the uniform lattice structure,the elastic modulus for the structure with the same relative density increases by more than 17%,and the yield strength increases by more than 10.2%.Three kinds of TPMS lattice structures are fabricated by laser powder bed fusion(L-PBF)with 316L stainless steel to verify the proposed enhanced design.The manufacture-induced geometric deviation between the as-design and as-printed models is measured by micro X-ray computed tomography(μ-CT)scans.The quasi-static compression experimental results of P-type TPMS lattice structures show that the reinforced structures have stronger elastic moduli,ultimate strengths,and energy absorption capabilities than the homogeneous P-TPMS lattice structure.展开更多
The utilization of biodegradable magnesium(Mg)-based implants for restoration of bone function following trauma represents a transformative approach in orthopaedic application.One such alloy,magnesium-10 weight percen...The utilization of biodegradable magnesium(Mg)-based implants for restoration of bone function following trauma represents a transformative approach in orthopaedic application.One such alloy,magnesium-10 weight percent gadolinium(Mg-10Gd),has been specifically developed to address the rapid degradation of Mg while enhancing its mechanical properties to promote bone healing.Previous studies have demonstrated that Mg-10Gd exhibits favorable osseointegration;however,it exhibits distinct ultrastructural adaptation in comparison to conventional implants like titanium(Ti).A crucial aspect that remains unexplored is the impact of Mg-10Gd degradation on the bone microarchitecture.To address this,we employed hierarchical three-dimensional imaging using synchrotron radiation in conjunction with image-based finite element modelling.By using the methods outlined,the vascular porosity,lacunar porosity and the lacunar-canaliculi network(LCN)morphology of bone around Mg-10Gd in comparison to Ti in a rat model from 4 weeks to 20 weeks post-implantation was investigated.Our investigation revealed that within our observation period,the degradation of Mg-10Gd implants was associated with significantly lower(p<0.05)lacunar density in the surrounding bone,compared to Ti.Remarkably,the LCN morphology and the fluid flow analysis did not significantly differ for both implant types.In summary,a more pronounced lower lacunae distribution rather than their morphological changes was detected in the surrounding bone upon the degradation of Mg-10Gd implants.This implies potential disparities in bone remodelling rates when compared to Ti implants.Our findings shed light on the intricate relationship between Mg-10Gd degradation and bone microarchitecture,contributing to a deeper understanding of the implications for successful osseointegration.展开更多
The possibility of the use of recycled aggregates from the construction industry in green concrete production is of increasing importance to reduce the negative environmental impact associated with construction and de...The possibility of the use of recycled aggregates from the construction industry in green concrete production is of increasing importance to reduce the negative environmental impact associated with construction and demolition wastes.The objective of this study is to investigate the effect of recycled concrete aggregate(RCA)quality on the properties of hardened concrete properties such as compressive strength,splitting tensile strength,density,water absorption capacity and porosity accessible to water.The RCA used in this study was obtained from the crushing of waste concrete with two different compressive strengths(LRCA obtained from the crushing of waste concrete having compressive strengths below 30 MPa and HRCA obtained from the crushing of waste concrete having compressive strengths above 30 MPa).The natural coarse limestone aggregate was 100%replaced with coarse LRCA and HRCA.As a result of the study,the use of 100%HRCA and%100 LRCA instead of limestone coarse aggregate in the concrete adversely affected its mechanical and physical properties.In addition,HRCA showed better performance in terms of compressive strength,tensile strength,water absorption and porosity compared to the use of LRCA.Furthermore,the percentage of adhered mortar on the surface of LRCA and HRCA was analyzed using a computerized micro tomography device,and it was found that the percentages of attached mortar and aggregates are 61%and 35.5%for LRCA,whilst the attached mortar and aggregate contents for HRCA are 45.9%and 53.7%,respectively.展开更多
基金sponsored by PETRONAS and YUTP (Yayasan Universiti Teknologi PETRONAS)
文摘To determine the effect of dissolution on pore network development in carbonate rocks, dissolution experiments, X-Ray microtomography, and thin section analysis were conducted on argillaceous limestone and grain limestone samples at different temperatures and constant pH, HCl concentration. The relationship between Ca^(2+) concentration and time was revealed through the experiments; pore size distribution before and after dissolution indicate that there is no correlation between the temperature and pore size variation, but pore size variation in grain limestone is more significant, indicating that the variation is mainly controlled by the heterogeneity of the rock itself(initial porosity and permeability) and the abundance of unstable minerals(related to crystal shape, size and mineral type). At different temperatures, the two kinds of carbonate rocks had very small variation in pore throat radius from 0.003 mm to 0.040 mm, which is 1.3 to 3.5 times more, 1.7 on average of the original pore throat radius. Their pore throat length varied from 0.05 mm to 0.35 mm. The minor changes in the pore throat radius, length and connectivity brought big changes to permeability of up to 1 000×10^(-3) μm^2.
基金supported by the National Natural Science Foundation of China (Grant Nos. 12102312 and 41372314)State Key Laboratory of Geohazard Prevention and Geoenvironment Protection Open Foundation, Chengdu University of Technology, China (Grant No. SKLGP2021K011)
文摘Due to seasonal climate alterations,the microstructure and permeability of granite residual soil are easily affected by multiple dry-wet cycles.The X-ray micro computed tomography(micro-CT)acted as a nondestructive tool for characterizing the microstructure of soil samples exposed to a range of damage levels induced by dry-wet cycles.Subsequently,the variations of pore distribution and permeability due to drywet cycling effects were revealed based on three-dimensional(3D)pore distribution analysis and seepage simulations.According to the results,granite residual soils could be separated into four different components,namely,pores,clay,quartz,and hematite,from micro-CT images.The reconstructed 3D pore models dynamically demonstrated the expanding and connecting patterns of pore structures during drywet cycles.The values of porosity and connectivity are positively correlated with the number of dry-wet cycles,which were expressed by exponential and linear functions,respectively.The pore volume probability distribution curves of granite residual soil coincide with the χ^(2)distribution curve,which verifies the effectiveness of the assumption of χ^(2)distribution probability.The pore volume distribution curves suggest that the pores in soils were divided into four types based on their volumes,i.e.micropores,mesopores,macropores,and cracks.From a quantitative and visual perspective,considerable small pores are gradually transformed into cracks with a large volume and a high connectivity.Under the action of dry-wet cycles,the number of seepage flow streamlines which contribute to water permeation in seepage simulation increases distinctly,as well as the permeability and hydraulic conductivity.The calculated hydraulic conductivity is comparable with measured ones with an acceptable error margin in general,verifying the accuracy of seepage simulations based on micro-CT results.
文摘Utilizing lightweight Al alloys in various industrial applications requires achieving precise pressure tightness and leak requirements.Vacuum pressure impregnation(VPI)with thermosetting polymers is commonly used to address leakage defects in die-cast Al alloys.In this study,the efficacy of the VPI technique in sealing alloy parts was investigated using a combination of nondestructive micro X-ray computed tomography(micro XCT)and a standard leak test.The results demonstrate that the commonly used water leak test is insufficient for determining the sealing performance.Instead,micro XCT shows distinct advantages by enabling more comprehensive analysis.It reveals the presence of a low atomic number impregnates sealant within casting defects,which has low grey contrast and allows for visualizing primary leakage paths in 3D.The effective atomic number of impregnated resin is 6.75 and that of Al alloy is 13.69 by dual-energy X-ray CT.This research findings will contribute to enhancing the standard VPI process parameters and the properties of impregnating sealants to improve quality assurance for impregnation in industrial metals.
基金Project(2019KJ2X08-4) supported by Chinalco Technology Development Project Fund,China。
文摘Micro porosity in aluminum alloys may contribute to fatigue life degradation, which can largely limit the application of alloys. Therefore, the fatigue life of a commercial 7050-T7451 thick plate and an experimental plate with different porosities was compared in this study. The X-ray computed tomography(XCT) was utilized to characterize the size, number density and spatial distribution of porosity inside various samples, and the fracture surface of fatigued specimens was compared by using scanning electron microscope(SEM). The results showed that the fatigue cracks prefer to initiate from constituent particles in the commercial alloy. Whereas the micro porosity is the predominant site for crack nucleation and subsequent failure in the experimental one. The presence of micro porosity in experimental7050-T7451 thick plate may reduce the fatigue life by an order of magnitude or more compared with the defect-free alloy. The pores close to sample surface are the main fatigue crack initiation site, among which larger and deeper pore leads to a shorter fatigue life. The crack initiation is also affected by the pore geometry and direction. Besides, the overall porosity inside the bulk can affect the crack propagation during fatigue tests.
基金supported by the Natural Science Foundation of Shandong Province,China(No.ZR2020MA088)Natural Science Foundation of Xinjiang Uygur Autonomous Region,China(No.2019D01C188)+1 种基金National Key Research and Development Program of China(No.2018YFC1200204)National Natural Science Foundation of China(No.12175127).
文摘The visualization and data mining of tumor multidimensional information may play a major role in the analysis of the growth,metastasis,and microenvironmental changes of tumors while challenging traditional imaging and data processing techniques.In this study,a general trans-scale and multi-modality measurement method was developed for the quantitative diagnosis of hepatocellular carcinoma(HCC)using a combination of propagation-based phase-contrast computed tomography(PPCT),scanning transmission soft X-ray microscopy(STXM),and Fourier transform infrared micro-spectroscopy(FTIR).Our experimental results reveal the trans-scale micro-morpho-logical HCC pathology and facilitate quantitative data analysis and comprehensive assessment.These results include some visualization features of PPCT-based tissue microenvironments,STXM-based cellular fine structures,and FTIR-based bio-macromolecular spectral characteris-tics during HCC tumor differentiation and proliferation.The proposed method provides multidimensional feature data support for constructing a high-accuracy machine learning algorithm based on a gray-level histogram,gray-gradient co-occurrence matrix,gray-level co-occurrence matrix,and back-propagation neural network model.Multi-dimensional information analysis and diagnosis revealed the morphological pathways of HCC pathological evolution and we explored the relationships between HCC-related feature changes in inflammatory microenviron-ments,cellular metabolism,and the stretching vibration peaks of biomolecules of lipids,proteins,and nucleic acids.Therefore,the proposed methodology has strong potential for the visualization of complex tumors and assessing the risks of tumor differentiation and metastasis.
基金financial support from National Key R&D Program of China(2020YFE0201700)Major New Drugs Innovation and Development(2017ZX09101001-005,China)+1 种基金the National Natural Science Foundation of China(81803441,81803446 and 81773645)Youth Innovation Promotion Association CAS(2018323,China)。
文摘Changes in structure of oral solid dosage forms(OSDF)elementally determine the drug release and its therapeutic effects.In this research,synchrotron radiation X-ray micro-computed tomography was utilized to visualize the 3 D structure of enteric coated pellets recovered from the gastrointestinal tract of rats.The structures of pellets in solid state and in vitro compendium media were measured.Pellets in vivo underwent morphological and structural changes which differed significantly from those in vitro compendium media.Thus,optimizations of the dissolution media were performed to mimic the appropriate in vivo conditions by introducing pepsin and glass microspheres in media.The sphericity,pellet volume,pore volume and porosity of the in vivo esomeprazole magnesium pellets in stomach for2 h were recorded 0.47,1.55×10^(8)μm^(3),0.44×10^(8)μm^(3)and 27.6%,respectively.After adding pepsin and glass microspheres,the above parameters in vitro reached to 0.44,1.64×10^(8)μm^(3)0.38×10^(8)μm^(3)and 23.0%,respectively.Omeprazole magnesium pellets behaved similarly.The structural features of pellets between in vitro media and in vivo condition were bridged successfully in terms of 3 D structures to ensure better design,characterization and quality control of advanced OSDF.
基金Project(2017XKQY012)supported by the Fundamental Research Funds for the Central Universities,China。
文摘Thermal shocking effect occurs when the coalbed methane(CBM)reservoirs meet liquid nitrogen(LN2)of extremely low temperature.In this study,3D via X-ray microcomputer tomography(μCT)and scanning electron microscope(SEM)are employed to visualize and quantify morphological evolution characteristics of fractures in coal after LN2 thermal shocking treatments.LN2 thermal shocking leads to a denser fracture network than its original state with coal porosity growth rate increasing up to 183.3%.The surface porosity of theμCT scanned layers inside the coal specimen is influenced by LN2 thermal shocking which rises from 18.76%to 215.11%,illustrating the deformation heterogeneity of coal after LN2 thermal shocking.The cracking effect of LN2 thermal shocking on the surface of low porosity is generally more effective than that of high surface porosity,indicating the applicability of LN2 thermal shocking on low-permeability CBM reservoir stimulation.The characteristics of SEM scanned coal matrix in the coal powder and the coal block after the LN2 thermal shocking presented a large amount of deep and shallow progressive scratch layers,fracture variation diversity(i.e.extension,propagation,connectivity,irregularity)on the surface of the coal block and these were the main reasons leading to the decrease of the uniaxial compressive strength of the coal specimen.
基金supported by the National Natural Science Foundation of China(Nos.12002031,12122202U22B2083)+1 种基金the China Postdoctoral Science Foundation(Nos.BX2021038 and 2021M700428)the National Key Research and Development of China(No.2022YFB4601901)。
文摘The Schwarz primitive triply periodic minimal surface(P-type TPMS)lattice structures are widely used.However,these lattice structures have weak load-bearing capacity compared with other cellular structures.In this paper,an adaptive enhancement design method based on the non-uniform stress distribution in structures with uniform thickness is proposed to design the P-type TPMS lattice structures with higher mechanical properties.Two types of structures are designed by adjusting the adaptive thickness distribution in the TPMS.One keeps the same relative density,and the other keeps the same of non-enhanced region thickness.Compared with the uniform lattice structure,the elastic modulus for the structure with the same relative density increases by more than 17%,and the yield strength increases by more than 10.2%.Three kinds of TPMS lattice structures are fabricated by laser powder bed fusion(L-PBF)with 316L stainless steel to verify the proposed enhanced design.The manufacture-induced geometric deviation between the as-design and as-printed models is measured by micro X-ray computed tomography(μ-CT)scans.The quasi-static compression experimental results of P-type TPMS lattice structures show that the reinforced structures have stronger elastic moduli,ultimate strengths,and energy absorption capabilities than the homogeneous P-TPMS lattice structure.
文摘The utilization of biodegradable magnesium(Mg)-based implants for restoration of bone function following trauma represents a transformative approach in orthopaedic application.One such alloy,magnesium-10 weight percent gadolinium(Mg-10Gd),has been specifically developed to address the rapid degradation of Mg while enhancing its mechanical properties to promote bone healing.Previous studies have demonstrated that Mg-10Gd exhibits favorable osseointegration;however,it exhibits distinct ultrastructural adaptation in comparison to conventional implants like titanium(Ti).A crucial aspect that remains unexplored is the impact of Mg-10Gd degradation on the bone microarchitecture.To address this,we employed hierarchical three-dimensional imaging using synchrotron radiation in conjunction with image-based finite element modelling.By using the methods outlined,the vascular porosity,lacunar porosity and the lacunar-canaliculi network(LCN)morphology of bone around Mg-10Gd in comparison to Ti in a rat model from 4 weeks to 20 weeks post-implantation was investigated.Our investigation revealed that within our observation period,the degradation of Mg-10Gd implants was associated with significantly lower(p<0.05)lacunar density in the surrounding bone,compared to Ti.Remarkably,the LCN morphology and the fluid flow analysis did not significantly differ for both implant types.In summary,a more pronounced lower lacunae distribution rather than their morphological changes was detected in the surrounding bone upon the degradation of Mg-10Gd implants.This implies potential disparities in bone remodelling rates when compared to Ti implants.Our findings shed light on the intricate relationship between Mg-10Gd degradation and bone microarchitecture,contributing to a deeper understanding of the implications for successful osseointegration.
文摘The possibility of the use of recycled aggregates from the construction industry in green concrete production is of increasing importance to reduce the negative environmental impact associated with construction and demolition wastes.The objective of this study is to investigate the effect of recycled concrete aggregate(RCA)quality on the properties of hardened concrete properties such as compressive strength,splitting tensile strength,density,water absorption capacity and porosity accessible to water.The RCA used in this study was obtained from the crushing of waste concrete with two different compressive strengths(LRCA obtained from the crushing of waste concrete having compressive strengths below 30 MPa and HRCA obtained from the crushing of waste concrete having compressive strengths above 30 MPa).The natural coarse limestone aggregate was 100%replaced with coarse LRCA and HRCA.As a result of the study,the use of 100%HRCA and%100 LRCA instead of limestone coarse aggregate in the concrete adversely affected its mechanical and physical properties.In addition,HRCA showed better performance in terms of compressive strength,tensile strength,water absorption and porosity compared to the use of LRCA.Furthermore,the percentage of adhered mortar on the surface of LRCA and HRCA was analyzed using a computerized micro tomography device,and it was found that the percentages of attached mortar and aggregates are 61%and 35.5%for LRCA,whilst the attached mortar and aggregate contents for HRCA are 45.9%and 53.7%,respectively.
