To investigate the effect of the electropulsing on dislocation mobility,specimens cut from the cold-rolled titanium sheet were treated by high density electropulsing with the maximum current density of 7.22,7.64,7.96 ...To investigate the effect of the electropulsing on dislocation mobility,specimens cut from the cold-rolled titanium sheet were treated by high density electropulsing with the maximum current density of 7.22,7.64,7.96 kA/mm 2 ,pulse period 110μs.The internal friction and elastic modulus were measured by a dynamic mechanical analyzer（DMA）.When strain amplitude lowers a certain critical one,the damping of the electropulsed titanium sheet is lower than that of the cold-rolled one.When the strain amplitude exceeds the critical one,the damping of the electropulsed titanium sheet is extraordinarily higher than that of the cold-rolled or conventional annealed one.Furthermore,it is found that the damping peak of the electropulsed titanium sheet shifts to lower temperature compared with the conventional annealed one.It is demonstrated that the electropulsing treatment can decrease dislocation tangles and enhance dislocation mobility.展开更多
Dislocation strengthening,as one of the methods to simultaneously enhance the room temperature strength and ductility of alloys,does not achieve the desired strengthening and plasticity effect during elevated-temperat...Dislocation strengthening,as one of the methods to simultaneously enhance the room temperature strength and ductility of alloys,does not achieve the desired strengthening and plasticity effect during elevated-temperature deformation.Here,we report a novel strategy to boost the dislocation multiplication and accumulation during deformation at elevated temperatures through dynamic strain aging(DSA).With the introduction of the rare-earth element Ho in Mg-Y-Zn alloy,Ho atoms diffuse toward dislocations during deformation at elevated temperatures,provoking the DSA effect,which increases the dislocation density significantly via the interactions of mobile dislocations and Ho atoms.The resulting alloy achieves a great enhancement of dislocation hardening and obtains the dual benefits of high strength and good ductility simultaneously at high homologous temperatures.The present work provides an effective strategy to enhancing the strength and ductility for elevated-temperature materials.展开更多
Impact deformation behaviors of CT20 alloy with lamellar microstructure(LM),equiaxed microstructure(EM)and bimodal microstructure(BM)at room temperature were systematically investigated in this study.The experimental ...Impact deformation behaviors of CT20 alloy with lamellar microstructure(LM),equiaxed microstructure(EM)and bimodal microstructure(BM)at room temperature were systematically investigated in this study.The experimental results indicated the excellent mechanical properties of CT20 alloy with BM un-der dynamic load.The impact toughness of BM specimen(∼118 J/cm^(2))is∼17.5%higher than that of LM specimen and∼33.8%higher than that of EM specimen.The impact energy of EM specimen is the lowest due to the relatively simple equiaxed microstructure.LM specimen can absorb the highest crack initia-tion energy due to the best twinning ability.The highest impact toughness of BM specimen is induced by multi-factor coupling during impact deformation.Finer initial equivalent grain size,smaller lamellar thickness,lamellar induces twinning,finer twins,crack propagation path,and interaction between twins andβlamellar are all factors affecting impact toughness.展开更多
Ti-6Al,Ti-6Al-2Mo and Ti-6Al-3Nb alloys were prepared to investigate the toughening effects ofβstabilizers Mo and Nb on impact toughness and crack resistance of titanium alloys.Instrumented Charpy impact tests showed...Ti-6Al,Ti-6Al-2Mo and Ti-6Al-3Nb alloys were prepared to investigate the toughening effects ofβstabilizers Mo and Nb on impact toughness and crack resistance of titanium alloys.Instrumented Charpy impact tests showed that the total impact absorbed energy of Ti-6Al-2Mo and Ti-6Al-3Nb(∼64 J)were two times higher than that of Ti-6Al(∼30 J),indicating the higher impact toughness of Ti-6Al-2Mo and Ti-6Al-3Nb alloys.Analysis of load-displacement curves revealed the similar crack initiation energy of Ti-6Al,Ti-6Al-2Mo and Ti-6Al-3Nb(15.4 J,16.1 J and 15.0 J,respectively).However,the higher crack propagation energy of Ti-6Al-2Mo and Ti-6Al-3Nb(46.7 J and 48.3 J,respectively)were about three times higher than that of Ti-6Al(14.4 J),indicating the stronger resistance to crack propagation in Ti-6Al-2Mo and Ti-6Al-3Nb.Post-mortem analysis of impact samples demonstrated that the increased dislocation density and deformation twinning were mainly responsible for the stronger resistance to crack propagation in Ti-6Al-2Mo and Ti-6Al-3Nb.Due to the invisibility of dislocation activation and deformation twinning during the Charpy impact process,a mathematical model has been proposed to evaluate the effects of Al,Mo and Nb elements on dislocation mobility based on the Yu Rui-huang electron theory.Addition of Mo and Nb elements significantly improved the dislocation mobility in Ti-6Al-2Mo and Ti-6Al-3Nb compared to that in Ti-6Al alloy.Therefore,more dislocations were activated in Ti-6Al-2Mo and Ti-6Al-3Nb which supplied the larger plastic deformation under impact loading.A dislocation-based model also has been proposed to interpret the nucleation and propagation of deformation twinning under the impact loading.Dislocation pileup atα/βinterfaces provided potential sites for nucleation of deformation twinning in Ti-6Al-2Mo and Ti-6Al-3Nb.Furthermore,deformation twinning facilitated the dislocation motion inαgrains with hard orientations.The increased dislocation mobility and deformation twinning were responsible for the stronger crack resistance as well as the higher impact toughness of Ti-6Al-2Mo and Ti-6Al-3Nb alloys.展开更多
A new medium-Mn steel was designed to achieve unprecedented tensile properties,with a yield strength beyond 1.1 GPa and a uniform elongation over 50%.The tensile behavior shows a heterogeneous deforma-tion feature,whi...A new medium-Mn steel was designed to achieve unprecedented tensile properties,with a yield strength beyond 1.1 GPa and a uniform elongation over 50%.The tensile behavior shows a heterogeneous deforma-tion feature,which displays a yield drop followed by a large Lüders band strain and several Portevin-Le Châtelier bands.Multiple strain hardening mechanisms for excellent tensile properties were revealed.Firstly,non-uniform martensite transformation occurs only within a localized deformation band,and ini-tiation and propagation of every localized deformation band need only a small amount of martensite transformation,which can provide a persistent and complete transformation-induced-plasticity effect dur-ing a large strain range.Secondly,geometrically necessary dislocations induced from macroscopic strain gradient at the front of localized deformation band and microscopic strain gradient among various phases provide strong heter-deformation-induced hardening.Lastly,martensite formed by displacive shear trans-formation can inherently generate a high density of mobile screw dislocations,and interstitial C atoms segregated at phase boundaries and enriched in austenite play a vital role in the dislocation multipli-cation due to the dynamic strain aging effect,and these two effects provide a high density of mobile dislocations for strong strain hardening.展开更多
The dependence of dislocation mobility on stress is the fundamental ingredient for the deformation in crystalline materials. Strength and ductility, the two most important properties characterizing mechanical behavior...The dependence of dislocation mobility on stress is the fundamental ingredient for the deformation in crystalline materials. Strength and ductility, the two most important properties characterizing mechanical behavior of crystalline metals, are in general governed by dislocation motion. Recording the position of a moving dislocation in a short time window is still challenging, and direct observations which enable us to deduce the speed-stress relationship of dislocations are still missing. Using large-scale molecular dynamics simulations, we obtain the motion of an obstacle-free twinning partial dislocation in face centred cubic crystals with spatial resolution at the angstrom scale and picosecond temporal information. The dislocation exhibits two limiting speeds: the first is subsonic and occurs when the resolved shear stress is on the order of hundreds of megapascal. While the stress is raised to gigapascal level, an abrupt jump of dislocation velocity occurs, from subsonic to supersonic regime. The two speed limits are governed respectively by the local transverse and longitudinal phonons associated with the stressed dislocation, as the two types of phonons facilitate dislocation gliding at different stress levels.展开更多
基金Project(50875061)supported by the National Natural Science Foundation of ChinaProject(20092302110016)supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China
文摘To investigate the effect of the electropulsing on dislocation mobility,specimens cut from the cold-rolled titanium sheet were treated by high density electropulsing with the maximum current density of 7.22,7.64,7.96 kA/mm 2 ,pulse period 110μs.The internal friction and elastic modulus were measured by a dynamic mechanical analyzer（DMA）.When strain amplitude lowers a certain critical one,the damping of the electropulsed titanium sheet is lower than that of the cold-rolled one.When the strain amplitude exceeds the critical one,the damping of the electropulsed titanium sheet is extraordinarily higher than that of the cold-rolled or conventional annealed one.Furthermore,it is found that the damping peak of the electropulsed titanium sheet shifts to lower temperature compared with the conventional annealed one.It is demonstrated that the electropulsing treatment can decrease dislocation tangles and enhance dislocation mobility.
基金supported by the National Key Research and Development Project(2023YFA1609100)the NSFC Funding(U2141207,52171111,52001083)+6 种基金Natural Science Foundation of Heilongjiang(YQ2023E026)China Postdoctoral Science foundation(2024M754149)Postdoctoral Fellowship Program of CPSF(GZC20242192)support from the National Science Foundation(DMR-1611180 and 1809640)with the program directors,DrsHKU Seed Fund for Collaborative Research(#2207101618)support by Croucher Senior Research Fellowship and City U Project(Project No.9229019)Shenzhen Science and Technology Program(Project No.JCYJ20220818101203007)。
文摘Dislocation strengthening,as one of the methods to simultaneously enhance the room temperature strength and ductility of alloys,does not achieve the desired strengthening and plasticity effect during elevated-temperature deformation.Here,we report a novel strategy to boost the dislocation multiplication and accumulation during deformation at elevated temperatures through dynamic strain aging(DSA).With the introduction of the rare-earth element Ho in Mg-Y-Zn alloy,Ho atoms diffuse toward dislocations during deformation at elevated temperatures,provoking the DSA effect,which increases the dislocation density significantly via the interactions of mobile dislocations and Ho atoms.The resulting alloy achieves a great enhancement of dislocation hardening and obtains the dual benefits of high strength and good ductility simultaneously at high homologous temperatures.The present work provides an effective strategy to enhancing the strength and ductility for elevated-temperature materials.
基金financially supported by the National Key Re-search and Development Program of China(No.2022YFB3705605)the Science and Technology Major Project of Shaanxi Province of China(No.2020zdzx04-01-02)+1 种基金the National Natural Science Foun-dation of China(No.52101122)the National Key Laboratory Foundation of Science and Technology on Materials under Shock and Impact(No.6142902220202).
文摘Impact deformation behaviors of CT20 alloy with lamellar microstructure(LM),equiaxed microstructure(EM)and bimodal microstructure(BM)at room temperature were systematically investigated in this study.The experimental results indicated the excellent mechanical properties of CT20 alloy with BM un-der dynamic load.The impact toughness of BM specimen(∼118 J/cm^(2))is∼17.5%higher than that of LM specimen and∼33.8%higher than that of EM specimen.The impact energy of EM specimen is the lowest due to the relatively simple equiaxed microstructure.LM specimen can absorb the highest crack initia-tion energy due to the best twinning ability.The highest impact toughness of BM specimen is induced by multi-factor coupling during impact deformation.Finer initial equivalent grain size,smaller lamellar thickness,lamellar induces twinning,finer twins,crack propagation path,and interaction between twins andβlamellar are all factors affecting impact toughness.
基金The authors acknowledge the financial supports of National Key Research and Development Program of China(2016YFB0301201)。
文摘Ti-6Al,Ti-6Al-2Mo and Ti-6Al-3Nb alloys were prepared to investigate the toughening effects ofβstabilizers Mo and Nb on impact toughness and crack resistance of titanium alloys.Instrumented Charpy impact tests showed that the total impact absorbed energy of Ti-6Al-2Mo and Ti-6Al-3Nb(∼64 J)were two times higher than that of Ti-6Al(∼30 J),indicating the higher impact toughness of Ti-6Al-2Mo and Ti-6Al-3Nb alloys.Analysis of load-displacement curves revealed the similar crack initiation energy of Ti-6Al,Ti-6Al-2Mo and Ti-6Al-3Nb(15.4 J,16.1 J and 15.0 J,respectively).However,the higher crack propagation energy of Ti-6Al-2Mo and Ti-6Al-3Nb(46.7 J and 48.3 J,respectively)were about three times higher than that of Ti-6Al(14.4 J),indicating the stronger resistance to crack propagation in Ti-6Al-2Mo and Ti-6Al-3Nb.Post-mortem analysis of impact samples demonstrated that the increased dislocation density and deformation twinning were mainly responsible for the stronger resistance to crack propagation in Ti-6Al-2Mo and Ti-6Al-3Nb.Due to the invisibility of dislocation activation and deformation twinning during the Charpy impact process,a mathematical model has been proposed to evaluate the effects of Al,Mo and Nb elements on dislocation mobility based on the Yu Rui-huang electron theory.Addition of Mo and Nb elements significantly improved the dislocation mobility in Ti-6Al-2Mo and Ti-6Al-3Nb compared to that in Ti-6Al alloy.Therefore,more dislocations were activated in Ti-6Al-2Mo and Ti-6Al-3Nb which supplied the larger plastic deformation under impact loading.A dislocation-based model also has been proposed to interpret the nucleation and propagation of deformation twinning under the impact loading.Dislocation pileup atα/βinterfaces provided potential sites for nucleation of deformation twinning in Ti-6Al-2Mo and Ti-6Al-3Nb.Furthermore,deformation twinning facilitated the dislocation motion inαgrains with hard orientations.The increased dislocation mobility and deformation twinning were responsible for the stronger crack resistance as well as the higher impact toughness of Ti-6Al-2Mo and Ti-6Al-3Nb alloys.
基金supported by the National Key R&D Pro-gram of China(No.2017YFA0204402)the NSFC Basic Science Cen-ter Program for“Multiscale Problems in Nonlinear Mechanics”(No.11988102)the National Natural Science Foundation of China(Nos.11790293 and 52192591).
文摘A new medium-Mn steel was designed to achieve unprecedented tensile properties,with a yield strength beyond 1.1 GPa and a uniform elongation over 50%.The tensile behavior shows a heterogeneous deforma-tion feature,which displays a yield drop followed by a large Lüders band strain and several Portevin-Le Châtelier bands.Multiple strain hardening mechanisms for excellent tensile properties were revealed.Firstly,non-uniform martensite transformation occurs only within a localized deformation band,and ini-tiation and propagation of every localized deformation band need only a small amount of martensite transformation,which can provide a persistent and complete transformation-induced-plasticity effect dur-ing a large strain range.Secondly,geometrically necessary dislocations induced from macroscopic strain gradient at the front of localized deformation band and microscopic strain gradient among various phases provide strong heter-deformation-induced hardening.Lastly,martensite formed by displacive shear trans-formation can inherently generate a high density of mobile screw dislocations,and interstitial C atoms segregated at phase boundaries and enriched in austenite play a vital role in the dislocation multipli-cation due to the dynamic strain aging effect,and these two effects provide a high density of mobile dislocations for strong strain hardening.
基金supported by the National Natural Science Foundation of China(Grant No.11425211)
文摘The dependence of dislocation mobility on stress is the fundamental ingredient for the deformation in crystalline materials. Strength and ductility, the two most important properties characterizing mechanical behavior of crystalline metals, are in general governed by dislocation motion. Recording the position of a moving dislocation in a short time window is still challenging, and direct observations which enable us to deduce the speed-stress relationship of dislocations are still missing. Using large-scale molecular dynamics simulations, we obtain the motion of an obstacle-free twinning partial dislocation in face centred cubic crystals with spatial resolution at the angstrom scale and picosecond temporal information. The dislocation exhibits two limiting speeds: the first is subsonic and occurs when the resolved shear stress is on the order of hundreds of megapascal. While the stress is raised to gigapascal level, an abrupt jump of dislocation velocity occurs, from subsonic to supersonic regime. The two speed limits are governed respectively by the local transverse and longitudinal phonons associated with the stressed dislocation, as the two types of phonons facilitate dislocation gliding at different stress levels.
