In many astrophysical black hole systems, episodic jets of plasma blobs have been observed, which are much faster and more powerful than continuous jets. A magnetohydrodynamical model was proposed by Yuan et al. to st...In many astrophysical black hole systems, episodic jets of plasma blobs have been observed, which are much faster and more powerful than continuous jets. A magnetohydrodynamical model was proposed by Yuan et al. to study the formation of episodic jets in Sgr A＊. By taking Sgr A＊ and a stellar mass black hole as examples, we modify the model of Yuan et al. by including the effects of relativity, and further study the relativistic motion and expansion of episodic jets of plasma blobs. Then we study the collision between two consecutive ejections in the modified model, and calculate the magnetic energy released in the collision. Our results show two consecutive blobs can collide with each other, and the released magnetic energy is more than 1050 erg, which supports the idea that a gamma-ray burst is powered by the collision of episodic jets, as suggested by Yuan ＆ Zhang.展开更多
The big-tapered profiled ring disk is a key component of engines for rockets and missiles.A new forming technology,as called spinning-rolling process,has been proposed previously for the high performance,high efficien...The big-tapered profiled ring disk is a key component of engines for rockets and missiles.A new forming technology,as called spinning-rolling process,has been proposed previously for the high performance,high efficiency and low-cost manufacturing of the component.Blank design is the key part of plastic forming process design.For spinning-rolling process,the shape and size of the blank play a crucial role in process stability,deformation behavior and dimensional accuracy.So this work proposes a blank design method to determine the geometry structure and sizes of the blank.The mathematical model for calculating the blank size has been deduced based on volume conservation and neutral layer length invariance principle.The FE simulation and corresponding trial production of an actual big-tapered profiled ring disk show that the proposed blank design method is applicative.In order to obtain a preferred blank,the influence rules of blank size determined by different deformation degrees(rolling ratio k)on the spinning-rolling process are revealed by comprehensive FE simulations.Overall considering the process stability,circularity of the deformed ring disk and forming forces,a reasonable range of deformation degree(rolling ratio k)is recommended for the blank design of the new spinning-rolling process.展开更多
This study investigates the heat transfer and flow dynamics of a ternary hybrid nanofluid comprising alumina,copper,and silica/titania nanoparticles dispersed in water.The analysis considers the effects of suction,mag...This study investigates the heat transfer and flow dynamics of a ternary hybrid nanofluid comprising alumina,copper,and silica/titania nanoparticles dispersed in water.The analysis considers the effects of suction,magnetic field,and Joule heating over a permeable shrinking disk.Amathematicalmodel is developed and converted to a systemof differential equations using similarity transformation which then,solved numerically using the bvp4c solver in Matlab software.The study introduces a novel comparative analysis of alumina-copper-silica and alumina-coppertitania nanofluids,revealing distinct thermal conductivity behaviors and identifying critical suction values necessary for flow stabilization.Dual solutions are found within a specific range of parameters such that the minimum required suction values for flow stability,with S_(c)=1.2457 for alumina-copper-silica/water and S_(c)=1.2351 for alumina-coppertitania/water.The results indicate that increasing suction by 1%enhances the skin friction coefficient by up to 4.17%and improves heat transfer efficiency by approximately 1%,highlighting its crucial role in stabilizing the opposing flow induced by the shrinking disk.Additionally,the inclusion of 1%silica nanoparticles reduces both skin friction and heat transfer rate by approximately 0.28%and 0.85%,respectively,while 1%titania concentration increases skin friction by 3.02%but results in a slight heat transfer loss of up to 0.61%.These findings confirm the superior thermal performance of alumina-copper-titania/water,making it a promising candidate for enhanced cooling systems,energy-efficient heat exchangers,and industrial thermal management applications.展开更多
This study explores the dynamics of charged Hayward black holes,focusing on the effects of electric charge and the length factor on accretion disk characteristics.Our results show that increasing both parameters reduc...This study explores the dynamics of charged Hayward black holes,focusing on the effects of electric charge and the length factor on accretion disk characteristics.Our results show that increasing both parameters reduces the size of the event horizon and innermost stable circular orbits(ISCO)radius,with the electric charge exerting a more pronounced influence.Additionally,the length factor and electric charge can effectively replicate the spin of a Kerr black hole.Both parameters also affect the electromagnetic radiation emitted from the accretion disk,increasing the flux,temperature,and radiative efficiency.The peak radiation occurs in the soft x-ray band,with higher values of electric charge and length factor enhancing disk luminosity and shifting the peak to higher frequencies.These findings can offer valuable insights into the accretion processes around black holes and their observable signatures,particularly in x-ray astronomy.展开更多
This paper discusses the model of the boundary layer(BL)flow and the heat transfer characteristics of hybrid nanofluid(HNF)over shrinking/stretching disks.In addition,the thermal radiation and the impact of velocity a...This paper discusses the model of the boundary layer(BL)flow and the heat transfer characteristics of hybrid nanofluid(HNF)over shrinking/stretching disks.In addition,the thermal radiation and the impact of velocity and thermal slip boundary conditions are also examined.The considered hybrid nano-fluid contains silver(Ag)and iron oxide(Fe_(3)O_(4))nanoparticles dispersed in the water to prepare the Ag-Fe_(3)O_(4)/water-based hybrid nanofluid.The requisite posited partial differential equations model is converted to ordinary differential equations using similarity transformations.For a numerical solution,the shooting method in Maple is employed.Moreover,the duality in solutions is achieved for both cases of the disk(stretching(λ>0)and shrinking(λ<0)).At the same time,a unique solution is observed for λ=0.No solution is found for them at λ<λ_(c),whereas the solutions are split at the λ=λ_(c).Besides,the value of the λ_(c) is dependent on the φ_(hnf).Meanwhile,the values of f″(0)and -θ′(0)intensified with increasing φ_(hnf).Stability analysis has been applied using bvp4c in MATLAB software due to a dual solution.Furthermore,analysis shows that the first solution is stable and feasible physically.For the slip parameters,an increase in the velocity slip parameter increases the velocity and shear stress profiles while increasing the temperature profile in the first solutions.While the rise in thermal slip parameter reduces the temperature profile nanoparticle volume fractions increase it.展开更多
Most massive stars reside in binary or multi-object systems.Short gamma-ray bursts(sGRBs),the product of the merger of double compact objects,may originate from massive common-envelope binaries.In contrast,the progeni...Most massive stars reside in binary or multi-object systems.Short gamma-ray bursts(sGRBs),the product of the merger of double compact objects,may originate from massive common-envelope binaries.In contrast,the progenitors of long GRBs(lGRBs)are typically considered isolated massive stars.However,no effective method has yet been established to identify potential companions from current observations.Recent studies have demonstrated that quasi-periodic oscillation signatures can serve as a promising tool to probe the properties of GRB central engines.In this study,by drawing an analogy to periodicity in X-ray binaries,we explore the precession periods of companion-induced disk precession for lGRBs born in the ultra-compact binary scenario.Our results suggest that the periodicity observed in lGRB afterglows,measured in units of 1000 s or more,may indicate that lGRBs originate within binary systems.GRB 050904 could represent a rare case where the burst occurred in a binary system,leaving behind a black hole–black hole binary at redshift z=6.29.展开更多
Sequential prefetching schemes are widely employed in storage servers to mask disk latency and improve system throughput. However, existing schemes cannot benefit parallel disk systems as expected due to the fact that...Sequential prefetching schemes are widely employed in storage servers to mask disk latency and improve system throughput. However, existing schemes cannot benefit parallel disk systems as expected due to the fact that they ignore the distinct internal characteristics of the parallel disk system, in particular, data striping. Moreover, their aggressive prefetching pattern suffers from premature evictions and prolonged request latencies. In this paper, we propose a strip-oriented asynchronous prefetching (SoAP) technique, which is dedicated to the parallel disk system. It settles the above-mentioned problems by providing multiple novel features, e.g., enhanced prediction accuracy, adaptive prefetching strength, physical data layout awareness, and timely prefetching. To validate SoAP, we implement a prototype by modifying the software redundant arrays of inexpensive disks (RAID) under Linux. Experimental results demonstrate that SoAP can consistently offer improved average response time and throughput to the parallel disk system under non-random workloads compared with STEP, SP, ASP, and Linux-like SEQPs.展开更多
Considering the elastic supports,the finite element model of rotor-bladed disk-casing system is established using commercial software ANSYS/LS-DYNA.Assuming that broken blade is released from the disk,the complicate r...Considering the elastic supports,the finite element model of rotor-bladed disk-casing system is established using commercial software ANSYS/LS-DYNA.Assuming that broken blade is released from the disk,the complicate rubbing responses of unbalanced rotor-bladed disk-casing system are studied under different operational speeds.In addition,influences of both plastic deformation of blade and casing failure are analyzed.The results show that there exist some multiple even fractional frequencies in the transient and steady vibration responses of unbalanced rotor.Besides,one nodal diameter vibration of bladed disk coupling with the lateral vibration of the shaft as well as the first order bending vibration of blade can be excited under low operational speed,while the first order bending vibration of blade coupling with the lateral vibration of disk-shaft is easily excited under high operational speed.During rubbing process,three distinct contact states can be observed:broken blade-casing contact,broken blade-blade component-casing contact and broken blade-casing contact/blade component-casing contact/blade selfcontact.It is worth noting that the third contact state is related to the operational speed.With the increase of operational speed,self-contact in the blade may occur.展开更多
Increasing performance parameters of hard disk drive (HDD) such as higher capacity and faster data access speed with decreasing physical size make HDD more susceptible to thermal effects. Contact temperature measureme...Increasing performance parameters of hard disk drive (HDD) such as higher capacity and faster data access speed with decreasing physical size make HDD more susceptible to thermal effects. Contact temperature measurement using thermocouple is not suitable for the rotating platter of HDD. Heat analysis using simulation software requires accurate initial parameter setting such as thermal (initial & boundary) conditions of certain regions. Temperature measurement using infrared (IR) system avoids these limitations;it is non-contact, responsive and does not require initial parameter setting. Thermal pattern distribution can be studied from the thermal images. However, emissivity of the target has to be known and calibration of the system is essential for accurate temperature reading. This paper showed that temperature within the HDD increases with ambient temperature and time, but the thermal distribution pattern in the HDD was not affected by different ambient temperatures. Three wall boundary conditions were conducted to study the thermal distribution pattern in the HDD. A solution was then proposed based on the results obtained from the experiments to improve the heat transfer rate and steady state temperature, and reduce the detrimental effects from high thermal generation in future prototypes. Another important finding was that the averaged temperature of the head cap was generally higher compared to that of the disk, as the spindle motor is the primary heat source within the HDD. Heat source analysis of HDD with IR system allows designers to have better visibility of the temperature generated in different components of the HDD. Proper cooling may enhance disk life as well as ensure the stability and integrity of the system.展开更多
The present paper discusses a design method for the head position in a Hard Disk Drive （HDD） control system. In the HDD control system, the sampling interval of the head position is constrained because of the hardwa...The present paper discusses a design method for the head position in a Hard Disk Drive （HDD） control system. In the HDD control system, the sampling interval of the head position is constrained because of the hardware specifications, but the hold interval of the control input is not constrained. In the present study, a multirate control system is designed, in which the sampling and the hold intervals are not equal. A multirate control law, which stabilizes a closed-loop system, is extended using newly introduced parameters such that the sample response of the plant output is maintained. Furthermore, intersample ripples in the steady state are eliminated using the new design parameters, which can be selected independently of the sample response. As a result, the intersample response can be improved independently of the sample response. The proposed method is applied to a benchmark problem of an HDD system, and its effectiveness is demonstrated.展开更多
Infrared(IR)spectral energy distribution(SED)is the major tracer of protoplanetary disks.It was recently proposed to use the near-to-mid IR(or K-24)SED slopeαdefined between 2 and 24μm as a potential quantitative tr...Infrared(IR)spectral energy distribution(SED)is the major tracer of protoplanetary disks.It was recently proposed to use the near-to-mid IR(or K-24)SED slopeαdefined between 2 and 24μm as a potential quantitative tracer of disk age.We critically examine the viability of this idea and confront it with additional statistics of IR luminosities and SED shapes.We point out that,because the statistical properties of most of the complicated physical factors involved in disk evolution are still poorly understood in a quantitative sense,the only viable way is to assume them to be random so that an idealized“average disk”can be defined,which allows theαhistogram to trace its age.We confirm that the statistics of the zeroth order(luminosity),first order(slopeα),and second order characteristics(concavity)of the observed K-24 SEDs indeed carry useful information upon the evolutionary processes of the“average disk”.We also stress that intrinsic diversities in K-24 SED shapes and luminosities are always large at the level of individual stars so that the application of the evolutionary path of the“average disk”to individual stars must be done with care.The data of most curves in plots are provided on GitHub(Disk-age package https://github.com/starage/disk-age/).展开更多
The separation of rare earths is difficult due to their similar properties and the complex characteristics of associated vein o res.Complexation-ultrafiltration(CUF)and shear induced o rderly dissociation coupling wit...The separation of rare earths is difficult due to their similar properties and the complex characteristics of associated vein o res.Complexation-ultrafiltration(CUF)and shear induced o rderly dissociation coupling with ultrafiltration(SIODUF)were used to separate metal ions(M,M=La(Ⅲ),Ce(Ⅳ)and Ca(Ⅱ))from simulated bastnaesite leaching solution using acidic phosphonic chitosan(aPCS)and rotating disk membrane.Effect of simultaneous removal of metallic ions was investigated by CUF,and suitable conditions were obtained for C/M 10.0(mass ratio of complexant to metal ions)and pH 5.0.The shear stabilities of aPCS-M complexes were explored at different pH values and the results show that the complexes can dissociate at a certain rotational speed,the critical one.The critical s hear rates of aPCS-La,aPCS-Ce and aPCS-Ca complexes at pH 5.0 were calculated as 1.42×10^(5).1.69×10^(5) and 9.75×10^(4) s^(-1),respectively.The order of complexes shear stability is aPCS-Ca aPCS-La<aPCS-Ce.The high selective separation of M and regeneration of aPCS were achieved by SIODUF in the light of the difference of aPCSM complexes shear stabilities.The separation coefficientsβLa/Ce andβCa/La reach 31.2 and 53.9,respectively.展开更多
In this study,we examine the effects of various shapes of nanoparticles in a steady flow of hybrid nanofluids between two stretchable rotating disks.The steady flow of hybrid nanofluids with transformer oil as the bas...In this study,we examine the effects of various shapes of nanoparticles in a steady flow of hybrid nanofluids between two stretchable rotating disks.The steady flow of hybrid nanofluids with transformer oil as the base fluid and Fe_(3)O_(4)+TiO_(2)as the hybrid nanofluid is considered.Several shapes of Fe_(3)O_(4)+TiO_(2)hybrid nanofluids,including sphere,brick,blade,cylinder,and platelet,are studied.Every shape exists in the same volume of a nanoparticle.The leading equations(partial differential equations(PDEs))are transformed to the nonlinear ordinary differential equations(ODEs)with the help of similarity transformations.The system of equations takes the form of ODEs depending on the boundary conditions,whose solutions are computed numerically by the bvp4c MATLAB solver.The outputs are compared with the previous findings,and an intriguing pattern is discovered,such that the tangential velocity is increased for the rotation parameter,while it is decreased by the stretching values because of the lower disk.For the reaction rate parameter,the concentration boundary layer becomes shorter,and the activation energy component increases the rate at which mass transfers come to the higher disk but have the opposite effect on the bottom disk.The ranges of various parameters taken into account are Pr=6.2,Re=2,M=1.0,φ_(1)=φ_(2)=0.03,K=0.5,S=-0.1,Br=0.3,Sc=2.0,α_(1)=0.2,γ=0.1,E_(n)=2.0,and q=1.0,and the rotation factor K is within the range of 0 to 1.展开更多
The disk around MWC 480 has shown multiple substructures in both dust and gas observations,possibly suggesting ongoing planet formation in situ.In this paper,we explore the gas kinematics of the MWC 480 disk by analyz...The disk around MWC 480 has shown multiple substructures in both dust and gas observations,possibly suggesting ongoing planet formation in situ.In this paper,we explore the gas kinematics of the MWC 480 disk by analyzing the archival Atacama Large Millimeter/submillimeter Array observations of^(12)CO(J=2-1),^(13)CO(J=2-1),and C^(18)O(J=2-1).By modeling the line-of-sight velocities,inferred from the Doppler shifts of the emission lines,we are able to decompose the three-dimensional(3D)velocity field of the disk into rotational,radial,and vertical components.Further analysis reveals the presence of large-scale gas flows in the(r,z)plane.Notably,we identify potential meridional flows across various heights as traced by all three CO isotopologues in the 80–120 au region,possibly associated with ongoing planet formation activities in this region.Moreover,we find upward flows near 200 au for all three CO isotopologues,which may point to the presence of disk winds.展开更多
Rotating disk subjected to stationary slider loading system is a very common mechanical structure. This paper investigates the multibody dynamics of a rotating flexible annular thin disk subjected to double slider loa...Rotating disk subjected to stationary slider loading system is a very common mechanical structure. This paper investigates the multibody dynamics of a rotating flexible annular thin disk subjected to double slider loading systems. Along the rotating disk radial and circumferential directions, two stationary slider loading systems are distributed. System dynamic model is solved by Galerkin＇s method, and then natural frequency, dynamic stability and mode shape are determined with a quadratic eigenvalue problem. Effects of the distributing positions and interaction mechanism of the double slider loading systems on natural frequency, dynamic stability and mode shape are discussed and investigated.展开更多
Spinning disk reactor(SDR)has emerged as a novel process intensification photocatalytic reactor,and it has higher mass transfer efficiency and photon utilization for the degradation of toxic organic pollutants by adva...Spinning disk reactor(SDR)has emerged as a novel process intensification photocatalytic reactor,and it has higher mass transfer efficiency and photon utilization for the degradation of toxic organic pollutants by advanced oxidation processes(AOPs).In this study,ZnO—TiO_(2)nanocomposites were prepared by solgel method,and coated on the disk of SDR by impregnation-pull-drying-calcination method.The performance of catalyst was characterized by X-ray diffraction,scanning electron microscope,X-ray photoelectron spectroscopy,photoluminescence and ultraviolet—visible diffuse reflectance spectroscopy.Photocatalytic ozonation in SDR was used to remove phenol,and various factors on degradation effect were studied in detail.The results showed that the rate of degradation and mineralization reached 100%and 83.4%under UV light irradiation after 50 min,compared with photocatalysis and ozonation,the removal rate increased by 69.3%and 34.7%,and mineralization rate increased by 56.7%and 62.9%,which indicated that the coupling of photocatalysis and ozonation had a synergistic effect.The radical capture experiments demonstrated that the active species such as photogenerated holes(h^(+)),hydroxyl radicals(·OH),superoxide radical(·O_(2)-)were responsible for phenol degradation,and·OH played a leading role in the degradation process,while h+and·O_(2)^(-)played a non-leading role.展开更多
In this hard disk record system,the IDE hard disk is controlled by FPGA(Field Programmable Gate Array),and the image is recorded to file format directly.In the same time,the recorded image is real-time and lossless.Al...In this hard disk record system,the IDE hard disk is controlled by FPGA(Field Programmable Gate Array),and the image is recorded to file format directly.In the same time,the recorded image is real-time and lossless.All of this is convenient for subsequent processing.展开更多
基金Supported by the National Natural Science Foundation of China
文摘In many astrophysical black hole systems, episodic jets of plasma blobs have been observed, which are much faster and more powerful than continuous jets. A magnetohydrodynamical model was proposed by Yuan et al. to study the formation of episodic jets in Sgr A＊. By taking Sgr A＊ and a stellar mass black hole as examples, we modify the model of Yuan et al. by including the effects of relativity, and further study the relativistic motion and expansion of episodic jets of plasma blobs. Then we study the collision between two consecutive ejections in the modified model, and calculate the magnetic energy released in the collision. Our results show two consecutive blobs can collide with each other, and the released magnetic energy is more than 1050 erg, which supports the idea that a gamma-ray burst is powered by the collision of episodic jets, as suggested by Yuan ＆ Zhang.
基金the National Natural Science Foundation of China(No.52275378)the National Key Laboratory for Precision Hot Processing of Metals(6142909200208)。
文摘The big-tapered profiled ring disk is a key component of engines for rockets and missiles.A new forming technology,as called spinning-rolling process,has been proposed previously for the high performance,high efficiency and low-cost manufacturing of the component.Blank design is the key part of plastic forming process design.For spinning-rolling process,the shape and size of the blank play a crucial role in process stability,deformation behavior and dimensional accuracy.So this work proposes a blank design method to determine the geometry structure and sizes of the blank.The mathematical model for calculating the blank size has been deduced based on volume conservation and neutral layer length invariance principle.The FE simulation and corresponding trial production of an actual big-tapered profiled ring disk show that the proposed blank design method is applicative.In order to obtain a preferred blank,the influence rules of blank size determined by different deformation degrees(rolling ratio k)on the spinning-rolling process are revealed by comprehensive FE simulations.Overall considering the process stability,circularity of the deformed ring disk and forming forces,a reasonable range of deformation degree(rolling ratio k)is recommended for the blank design of the new spinning-rolling process.
基金funded by Universiti Teknikal Malaysia Melaka,through Fakulti Teknologi dan Kejuruteraan Mekanikal(FTKM)’s publication fund-K23003.
文摘This study investigates the heat transfer and flow dynamics of a ternary hybrid nanofluid comprising alumina,copper,and silica/titania nanoparticles dispersed in water.The analysis considers the effects of suction,magnetic field,and Joule heating over a permeable shrinking disk.Amathematicalmodel is developed and converted to a systemof differential equations using similarity transformation which then,solved numerically using the bvp4c solver in Matlab software.The study introduces a novel comparative analysis of alumina-copper-silica and alumina-coppertitania nanofluids,revealing distinct thermal conductivity behaviors and identifying critical suction values necessary for flow stabilization.Dual solutions are found within a specific range of parameters such that the minimum required suction values for flow stability,with S_(c)=1.2457 for alumina-copper-silica/water and S_(c)=1.2351 for alumina-coppertitania/water.The results indicate that increasing suction by 1%enhances the skin friction coefficient by up to 4.17%and improves heat transfer efficiency by approximately 1%,highlighting its crucial role in stabilizing the opposing flow induced by the shrinking disk.Additionally,the inclusion of 1%silica nanoparticles reduces both skin friction and heat transfer rate by approximately 0.28%and 0.85%,respectively,while 1%titania concentration increases skin friction by 3.02%but results in a slight heat transfer loss of up to 0.61%.These findings confirm the superior thermal performance of alumina-copper-titania/water,making it a promising candidate for enhanced cooling systems,energy-efficient heat exchangers,and industrial thermal management applications.
文摘This study explores the dynamics of charged Hayward black holes,focusing on the effects of electric charge and the length factor on accretion disk characteristics.Our results show that increasing both parameters reduces the size of the event horizon and innermost stable circular orbits(ISCO)radius,with the electric charge exerting a more pronounced influence.Additionally,the length factor and electric charge can effectively replicate the spin of a Kerr black hole.Both parameters also affect the electromagnetic radiation emitted from the accretion disk,increasing the flux,temperature,and radiative efficiency.The peak radiation occurs in the soft x-ray band,with higher values of electric charge and length factor enhancing disk luminosity and shifting the peak to higher frequencies.These findings can offer valuable insights into the accretion processes around black holes and their observable signatures,particularly in x-ray astronomy.
基金the Researchers Supporting Project number(RSPD2025R997),King Saud University,Riyadh,Saudi Arabia.
文摘This paper discusses the model of the boundary layer(BL)flow and the heat transfer characteristics of hybrid nanofluid(HNF)over shrinking/stretching disks.In addition,the thermal radiation and the impact of velocity and thermal slip boundary conditions are also examined.The considered hybrid nano-fluid contains silver(Ag)and iron oxide(Fe_(3)O_(4))nanoparticles dispersed in the water to prepare the Ag-Fe_(3)O_(4)/water-based hybrid nanofluid.The requisite posited partial differential equations model is converted to ordinary differential equations using similarity transformations.For a numerical solution,the shooting method in Maple is employed.Moreover,the duality in solutions is achieved for both cases of the disk(stretching(λ>0)and shrinking(λ<0)).At the same time,a unique solution is observed for λ=0.No solution is found for them at λ<λ_(c),whereas the solutions are split at the λ=λ_(c).Besides,the value of the λ_(c) is dependent on the φ_(hnf).Meanwhile,the values of f″(0)and -θ′(0)intensified with increasing φ_(hnf).Stability analysis has been applied using bvp4c in MATLAB software due to a dual solution.Furthermore,analysis shows that the first solution is stable and feasible physically.For the slip parameters,an increase in the velocity slip parameter increases the velocity and shear stress profiles while increasing the temperature profile in the first solutions.While the rise in thermal slip parameter reduces the temperature profile nanoparticle volume fractions increase it.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(grant No.XDB0550400)the National Key Research and Development Program of China(Nos.2024YFA1611704 and 2021YFA0718500)the National Natural Science Foundation of China(NSFC,Nos.12473049,12041301,12121003,and 12225305).
文摘Most massive stars reside in binary or multi-object systems.Short gamma-ray bursts(sGRBs),the product of the merger of double compact objects,may originate from massive common-envelope binaries.In contrast,the progenitors of long GRBs(lGRBs)are typically considered isolated massive stars.However,no effective method has yet been established to identify potential companions from current observations.Recent studies have demonstrated that quasi-periodic oscillation signatures can serve as a promising tool to probe the properties of GRB central engines.In this study,by drawing an analogy to periodicity in X-ray binaries,we explore the precession periods of companion-induced disk precession for lGRBs born in the ultra-compact binary scenario.Our results suggest that the periodicity observed in lGRB afterglows,measured in units of 1000 s or more,may indicate that lGRBs originate within binary systems.GRB 050904 could represent a rare case where the burst occurred in a binary system,leaving behind a black hole–black hole binary at redshift z=6.29.
基金supported by the National Basic Research Program(973) of China (No. 2011CB302303)the National Natural Science Foundation of China (No. 60933002)the Fundamental Research Funds for the Central Universities,China (Nos.2012QN100 and 2011TUS-136)
文摘Sequential prefetching schemes are widely employed in storage servers to mask disk latency and improve system throughput. However, existing schemes cannot benefit parallel disk systems as expected due to the fact that they ignore the distinct internal characteristics of the parallel disk system, in particular, data striping. Moreover, their aggressive prefetching pattern suffers from premature evictions and prolonged request latencies. In this paper, we propose a strip-oriented asynchronous prefetching (SoAP) technique, which is dedicated to the parallel disk system. It settles the above-mentioned problems by providing multiple novel features, e.g., enhanced prediction accuracy, adaptive prefetching strength, physical data layout awareness, and timely prefetching. To validate SoAP, we implement a prototype by modifying the software redundant arrays of inexpensive disks (RAID) under Linux. Experimental results demonstrate that SoAP can consistently offer improved average response time and throughput to the parallel disk system under non-random workloads compared with STEP, SP, ASP, and Linux-like SEQPs.
基金supported by the National Natural Science Foundation of China(No.11772089)the Fundamental Research Funds for the Central Universities (Nos. N160312001and N160313004)the Research Project of State Key Laboratory of Mechanical System and Vibration(No.MSV201707)
文摘Considering the elastic supports,the finite element model of rotor-bladed disk-casing system is established using commercial software ANSYS/LS-DYNA.Assuming that broken blade is released from the disk,the complicate rubbing responses of unbalanced rotor-bladed disk-casing system are studied under different operational speeds.In addition,influences of both plastic deformation of blade and casing failure are analyzed.The results show that there exist some multiple even fractional frequencies in the transient and steady vibration responses of unbalanced rotor.Besides,one nodal diameter vibration of bladed disk coupling with the lateral vibration of the shaft as well as the first order bending vibration of blade can be excited under low operational speed,while the first order bending vibration of blade coupling with the lateral vibration of disk-shaft is easily excited under high operational speed.During rubbing process,three distinct contact states can be observed:broken blade-casing contact,broken blade-blade component-casing contact and broken blade-casing contact/blade component-casing contact/blade selfcontact.It is worth noting that the third contact state is related to the operational speed.With the increase of operational speed,self-contact in the blade may occur.
文摘Increasing performance parameters of hard disk drive (HDD) such as higher capacity and faster data access speed with decreasing physical size make HDD more susceptible to thermal effects. Contact temperature measurement using thermocouple is not suitable for the rotating platter of HDD. Heat analysis using simulation software requires accurate initial parameter setting such as thermal (initial & boundary) conditions of certain regions. Temperature measurement using infrared (IR) system avoids these limitations;it is non-contact, responsive and does not require initial parameter setting. Thermal pattern distribution can be studied from the thermal images. However, emissivity of the target has to be known and calibration of the system is essential for accurate temperature reading. This paper showed that temperature within the HDD increases with ambient temperature and time, but the thermal distribution pattern in the HDD was not affected by different ambient temperatures. Three wall boundary conditions were conducted to study the thermal distribution pattern in the HDD. A solution was then proposed based on the results obtained from the experiments to improve the heat transfer rate and steady state temperature, and reduce the detrimental effects from high thermal generation in future prototypes. Another important finding was that the averaged temperature of the head cap was generally higher compared to that of the disk, as the spindle motor is the primary heat source within the HDD. Heat source analysis of HDD with IR system allows designers to have better visibility of the temperature generated in different components of the HDD. Proper cooling may enhance disk life as well as ensure the stability and integrity of the system.
文摘The present paper discusses a design method for the head position in a Hard Disk Drive （HDD） control system. In the HDD control system, the sampling interval of the head position is constrained because of the hardware specifications, but the hold interval of the control input is not constrained. In the present study, a multirate control system is designed, in which the sampling and the hold intervals are not equal. A multirate control law, which stabilizes a closed-loop system, is extended using newly introduced parameters such that the sample response of the plant output is maintained. Furthermore, intersample ripples in the steady state are eliminated using the new design parameters, which can be selected independently of the sample response. As a result, the intersample response can be improved independently of the sample response. The proposed method is applied to a benchmark problem of an HDD system, and its effectiveness is demonstrated.
基金supported by the Natural Science Foundation of Yunnan Province(No.202201 BC070003)supported by the ANID FONDECYT Postdoctoral program No.3220029+2 种基金support by ANID,—Millennium Science Initiative Program—NCN19_171sponsored(in part)by the Chinese Academy of Sciences(CAS)the CAS South America Center for Astronomy(CASSACA)in Santiago,Chile.
文摘Infrared(IR)spectral energy distribution(SED)is the major tracer of protoplanetary disks.It was recently proposed to use the near-to-mid IR(or K-24)SED slopeαdefined between 2 and 24μm as a potential quantitative tracer of disk age.We critically examine the viability of this idea and confront it with additional statistics of IR luminosities and SED shapes.We point out that,because the statistical properties of most of the complicated physical factors involved in disk evolution are still poorly understood in a quantitative sense,the only viable way is to assume them to be random so that an idealized“average disk”can be defined,which allows theαhistogram to trace its age.We confirm that the statistics of the zeroth order(luminosity),first order(slopeα),and second order characteristics(concavity)of the observed K-24 SEDs indeed carry useful information upon the evolutionary processes of the“average disk”.We also stress that intrinsic diversities in K-24 SED shapes and luminosities are always large at the level of individual stars so that the application of the evolutionary path of the“average disk”to individual stars must be done with care.The data of most curves in plots are provided on GitHub(Disk-age package https://github.com/starage/disk-age/).
基金Project supported by the National Natural Science Foundation of China(22178392)the Fundamental Research Funds for the Central Universities of Central South University,China(2022ZZTS0493)。
文摘The separation of rare earths is difficult due to their similar properties and the complex characteristics of associated vein o res.Complexation-ultrafiltration(CUF)and shear induced o rderly dissociation coupling with ultrafiltration(SIODUF)were used to separate metal ions(M,M=La(Ⅲ),Ce(Ⅳ)and Ca(Ⅱ))from simulated bastnaesite leaching solution using acidic phosphonic chitosan(aPCS)and rotating disk membrane.Effect of simultaneous removal of metallic ions was investigated by CUF,and suitable conditions were obtained for C/M 10.0(mass ratio of complexant to metal ions)and pH 5.0.The shear stabilities of aPCS-M complexes were explored at different pH values and the results show that the complexes can dissociate at a certain rotational speed,the critical one.The critical s hear rates of aPCS-La,aPCS-Ce and aPCS-Ca complexes at pH 5.0 were calculated as 1.42×10^(5).1.69×10^(5) and 9.75×10^(4) s^(-1),respectively.The order of complexes shear stability is aPCS-Ca aPCS-La<aPCS-Ce.The high selective separation of M and regeneration of aPCS were achieved by SIODUF in the light of the difference of aPCSM complexes shear stabilities.The separation coefficientsβLa/Ce andβCa/La reach 31.2 and 53.9,respectively.
文摘In this study,we examine the effects of various shapes of nanoparticles in a steady flow of hybrid nanofluids between two stretchable rotating disks.The steady flow of hybrid nanofluids with transformer oil as the base fluid and Fe_(3)O_(4)+TiO_(2)as the hybrid nanofluid is considered.Several shapes of Fe_(3)O_(4)+TiO_(2)hybrid nanofluids,including sphere,brick,blade,cylinder,and platelet,are studied.Every shape exists in the same volume of a nanoparticle.The leading equations(partial differential equations(PDEs))are transformed to the nonlinear ordinary differential equations(ODEs)with the help of similarity transformations.The system of equations takes the form of ODEs depending on the boundary conditions,whose solutions are computed numerically by the bvp4c MATLAB solver.The outputs are compared with the previous findings,and an intriguing pattern is discovered,such that the tangential velocity is increased for the rotation parameter,while it is decreased by the stretching values because of the lower disk.For the reaction rate parameter,the concentration boundary layer becomes shorter,and the activation energy component increases the rate at which mass transfers come to the higher disk but have the opposite effect on the bottom disk.The ranges of various parameters taken into account are Pr=6.2,Re=2,M=1.0,φ_(1)=φ_(2)=0.03,K=0.5,S=-0.1,Br=0.3,Sc=2.0,α_(1)=0.2,γ=0.1,E_(n)=2.0,and q=1.0,and the rotation factor K is within the range of 0 to 1.
基金supported by the National Key Research and Development Program of China grant No.2021YFC2203001National Natural Science Foundation of China(NSFC,Grant Nos.12322301 and 12275021)+1 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences,grant No.XDB2300000the Interdiscipline Research Funds of Beijing Normal University。
文摘The disk around MWC 480 has shown multiple substructures in both dust and gas observations,possibly suggesting ongoing planet formation in situ.In this paper,we explore the gas kinematics of the MWC 480 disk by analyzing the archival Atacama Large Millimeter/submillimeter Array observations of^(12)CO(J=2-1),^(13)CO(J=2-1),and C^(18)O(J=2-1).By modeling the line-of-sight velocities,inferred from the Doppler shifts of the emission lines,we are able to decompose the three-dimensional(3D)velocity field of the disk into rotational,radial,and vertical components.Further analysis reveals the presence of large-scale gas flows in the(r,z)plane.Notably,we identify potential meridional flows across various heights as traced by all three CO isotopologues in the 80–120 au region,possibly associated with ongoing planet formation activities in this region.Moreover,we find upward flows near 200 au for all three CO isotopologues,which may point to the presence of disk winds.
基金supported by the National Natural Science Foundation of China (51105164)
文摘Rotating disk subjected to stationary slider loading system is a very common mechanical structure. This paper investigates the multibody dynamics of a rotating flexible annular thin disk subjected to double slider loading systems. Along the rotating disk radial and circumferential directions, two stationary slider loading systems are distributed. System dynamic model is solved by Galerkin＇s method, and then natural frequency, dynamic stability and mode shape are determined with a quadratic eigenvalue problem. Effects of the distributing positions and interaction mechanism of the double slider loading systems on natural frequency, dynamic stability and mode shape are discussed and investigated.
基金supported by the National Natural Science Foundation of China(22208328)Fundamental Research Program of Shanxi Province(20210302124618,202203021212134)。
文摘Spinning disk reactor(SDR)has emerged as a novel process intensification photocatalytic reactor,and it has higher mass transfer efficiency and photon utilization for the degradation of toxic organic pollutants by advanced oxidation processes(AOPs).In this study,ZnO—TiO_(2)nanocomposites were prepared by solgel method,and coated on the disk of SDR by impregnation-pull-drying-calcination method.The performance of catalyst was characterized by X-ray diffraction,scanning electron microscope,X-ray photoelectron spectroscopy,photoluminescence and ultraviolet—visible diffuse reflectance spectroscopy.Photocatalytic ozonation in SDR was used to remove phenol,and various factors on degradation effect were studied in detail.The results showed that the rate of degradation and mineralization reached 100%and 83.4%under UV light irradiation after 50 min,compared with photocatalysis and ozonation,the removal rate increased by 69.3%and 34.7%,and mineralization rate increased by 56.7%and 62.9%,which indicated that the coupling of photocatalysis and ozonation had a synergistic effect.The radical capture experiments demonstrated that the active species such as photogenerated holes(h^(+)),hydroxyl radicals(·OH),superoxide radical(·O_(2)-)were responsible for phenol degradation,and·OH played a leading role in the degradation process,while h+and·O_(2)^(-)played a non-leading role.
文摘In this hard disk record system,the IDE hard disk is controlled by FPGA(Field Programmable Gate Array),and the image is recorded to file format directly.In the same time,the recorded image is real-time and lossless.All of this is convenient for subsequent processing.
