The optical frequency comb has been widely used in precision measurement. In this study, a multi-peak fitting approach is first proposed to fit the two-photon transition spectrum which overlaps with the neighboring tr...The optical frequency comb has been widely used in precision measurement. In this study, a multi-peak fitting approach is first proposed to fit the two-photon transition spectrum which overlaps with the neighboring transition in Rb-87. The multi-peak fitting approach is used to eliminate the frequency shift affected by the neighboring transition. With locking the carrier envelope offset frequency at 1/4 repetition frequency, the transition frequency is measured to be 770569132739.9 +/- 5.8 kHz, which agrees well with the previous result recommended by Comite International des Poids et Mesures.展开更多
Ac-Stark shift of atom levels is caused by an ac-electromagnetic field. As an electromagnetic wave, laser light does induce ac-Stark shift. It is proved experimentally that if the light is linearly polarized, the dyna...Ac-Stark shift of atom levels is caused by an ac-electromagnetic field. As an electromagnetic wave, laser light does induce ac-Stark shift. It is proved experimentally that if the light is linearly polarized, the dynamic polarizability changes with polarization direction. The polarization direction of the linearly-polarized laser is tuned by 720°, and the ac-Stark shifts of the 4S1/2,m=±1/2→3D5/2,m=±1/2 clock transitions in ^40Ca^＋ are measured in steps of 10°. The frequency shifts change with laser polarization in a periodical manner and have values opposite to each other.展开更多
Optimizing the microchannel design of the next generation of chips requires an understanding of the in situ property evolution of the chip-based materials under fast cooling.This work overcomes the conventional relian...Optimizing the microchannel design of the next generation of chips requires an understanding of the in situ property evolution of the chip-based materials under fast cooling.This work overcomes the conventional reliance on reheating data of melt-quenched glasses by demonstrating direct observations of glass transition on cooling curves utilizing the most advanced fast differential scanning calorimetry.By leveraging an MEMS chip sensor that allows for rapid heat extraction from microgram-sized samples to a purged gas coolant,the device is able to reach ultra-fast cooling rates of up to 40,000 K·s^(−1).Four thermal regions are identified by examining the cooling behaviors of two metallic glasses.This is because the actual rate of the specimen can differ from the programmed rate,especially at high set rate when the actual rate decreases before the glass transition is completed.We define the operational window for reliable cooling curve analysis,build models with empirical and theoretical analyses to determine the maximum feasible cooling rate,and demonstrate how optimizing sample mass and environment temperature broaden this window.The method avoids deceptive structural relaxation effects verified by fictivetemperature analysis and permits the capture of full glass transition during cooling.展开更多
This paper briefly reviews the recent research on the near rapid directional solidification and microstructure superfining. The morphology transitions and the corresponding mechanical properties are presented. The cri...This paper briefly reviews the recent research on the near rapid directional solidification and microstructure superfining. The morphology transitions and the corresponding mechanical properties are presented. The critical velocities relevant to the morphology transitions are comprehensively given. Meanwhile the solidification characteristics near absolute stability limit are studied.It can be clearly seen that the superfine microstructures possess extremely better properties compared with the conventional microstructures.展开更多
By revisiting the three stage theory for the progress of science proposed by Taketani in 1942, the footmarks of fluidization research are examined. The bubbling and fast fluidization issues were emphasized so that the...By revisiting the three stage theory for the progress of science proposed by Taketani in 1942, the footmarks of fluidization research are examined. The bubbling and fast fluidization issues were emphasized so that the future offluidization research can be discussed among scientists and engineers in a wider perspective. The first cycle of fluidization research was started in the early 1940s by an initial stage of phenomenology. The second stage of structural studies was kicked off in the early 1950s with the introduction of the two phase theory. The third stage of essential studies occurred in the early 1960s in the form of bubble hydrodynamics. The second cycle, which confirmed the aforementioned three stages closed at the turn of the century, established a general understanding of suspension structures including agglomerating fluidization, bubbling, turbulent and fast fluidizations and pneumatic transport; also established powerful measurement and numerical simulation tools.After a general remark on science, technology and society issues the interactions between fluidization technology and science are revisited. Our future directions are discussed including the tasks in the third cycle, particularly in its phenomenology stage where strong motivation and intention are always necessary, in relation also to the green reforming of the present technology. A generalized definition of ＇fluidization＇ is proposed to extend fluidization principle into much wider scientific fields, which would be effective also for wider collaborations.展开更多
基金Supported by the National Natural Science Foundation of China under Grant Nos 91336103,10934010 and 61078026
文摘The optical frequency comb has been widely used in precision measurement. In this study, a multi-peak fitting approach is first proposed to fit the two-photon transition spectrum which overlaps with the neighboring transition in Rb-87. The multi-peak fitting approach is used to eliminate the frequency shift affected by the neighboring transition. With locking the carrier envelope offset frequency at 1/4 repetition frequency, the transition frequency is measured to be 770569132739.9 +/- 5.8 kHz, which agrees well with the previous result recommended by Comite International des Poids et Mesures.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.91336211,11634013,11622434,11474318,and 11504094)the Chinese Academy of Sciences(Grant No.XDB21030000)
文摘Ac-Stark shift of atom levels is caused by an ac-electromagnetic field. As an electromagnetic wave, laser light does induce ac-Stark shift. It is proved experimentally that if the light is linearly polarized, the dynamic polarizability changes with polarization direction. The polarization direction of the linearly-polarized laser is tuned by 720°, and the ac-Stark shifts of the 4S1/2,m=±1/2→3D5/2,m=±1/2 clock transitions in ^40Ca^＋ are measured in steps of 10°. The frequency shifts change with laser polarization in a periodical manner and have values opposite to each other.
基金supported by the National Natural Science Foundation of China (Grant Nos.92580120 and 52471188)。
文摘Optimizing the microchannel design of the next generation of chips requires an understanding of the in situ property evolution of the chip-based materials under fast cooling.This work overcomes the conventional reliance on reheating data of melt-quenched glasses by demonstrating direct observations of glass transition on cooling curves utilizing the most advanced fast differential scanning calorimetry.By leveraging an MEMS chip sensor that allows for rapid heat extraction from microgram-sized samples to a purged gas coolant,the device is able to reach ultra-fast cooling rates of up to 40,000 K·s^(−1).Four thermal regions are identified by examining the cooling behaviors of two metallic glasses.This is because the actual rate of the specimen can differ from the programmed rate,especially at high set rate when the actual rate decreases before the glass transition is completed.We define the operational window for reliable cooling curve analysis,build models with empirical and theoretical analyses to determine the maximum feasible cooling rate,and demonstrate how optimizing sample mass and environment temperature broaden this window.The method avoids deceptive structural relaxation effects verified by fictivetemperature analysis and permits the capture of full glass transition during cooling.
文摘This paper briefly reviews the recent research on the near rapid directional solidification and microstructure superfining. The morphology transitions and the corresponding mechanical properties are presented. The critical velocities relevant to the morphology transitions are comprehensively given. Meanwhile the solidification characteristics near absolute stability limit are studied.It can be clearly seen that the superfine microstructures possess extremely better properties compared with the conventional microstructures.
文摘By revisiting the three stage theory for the progress of science proposed by Taketani in 1942, the footmarks of fluidization research are examined. The bubbling and fast fluidization issues were emphasized so that the future offluidization research can be discussed among scientists and engineers in a wider perspective. The first cycle of fluidization research was started in the early 1940s by an initial stage of phenomenology. The second stage of structural studies was kicked off in the early 1950s with the introduction of the two phase theory. The third stage of essential studies occurred in the early 1960s in the form of bubble hydrodynamics. The second cycle, which confirmed the aforementioned three stages closed at the turn of the century, established a general understanding of suspension structures including agglomerating fluidization, bubbling, turbulent and fast fluidizations and pneumatic transport; also established powerful measurement and numerical simulation tools.After a general remark on science, technology and society issues the interactions between fluidization technology and science are revisited. Our future directions are discussed including the tasks in the third cycle, particularly in its phenomenology stage where strong motivation and intention are always necessary, in relation also to the green reforming of the present technology. A generalized definition of ＇fluidization＇ is proposed to extend fluidization principle into much wider scientific fields, which would be effective also for wider collaborations.
