Fatigue analysis of engine turbine blade is an essential issue.Due to various uncertainties during the manufacture and operation,the fatigue damage and life of turbine blade present randomness.In this study,the random...Fatigue analysis of engine turbine blade is an essential issue.Due to various uncertainties during the manufacture and operation,the fatigue damage and life of turbine blade present randomness.In this study,the randomness of structural parameters,working condition and vibration environment are considered for fatigue life predication and reliability assessment.First,the lowcycle fatigue problem is modelled as stochastic static system with random parameters,while the high-cycle fatigue problem is considered as stochastic dynamic system under random excitations.Then,to deal with the two failure modes,the novel Direct Probability Integral Method(DPIM)is proposed,which is efficient and accurate for solving stochastic static and dynamic systems.The probability density functions of accumulated damage and fatigue life of turbine blade for low-cycle and high-cycle fatigue problems are achieved,respectively.Furthermore,the time–frequency hybrid method is advanced to enhance the computational efficiency for governing equation of system.Finally,the results of typical examples demonstrate high accuracy and efficiency of the proposed method by comparison with Monte Carlo simulation and other methods.It is indicated that the DPIM is a unified method for predication of random fatigue life for low-cycle and highcycle fatigue problems.The rotational speed,density,fatigue strength coefficient,and fatigue plasticity index have a high sensitivity to fatigue reliability of engine turbine blade.展开更多
To deal with the problem of low computational precision at the nodes near the source and satisfy the requirements for computational efficiency in inversion imaging and finite-element numerical simulations of the direc...To deal with the problem of low computational precision at the nodes near the source and satisfy the requirements for computational efficiency in inversion imaging and finite-element numerical simulations of the direct current method, we propose a new mesh refinement and recoarsement method for a two-dimensional point source. We introduce the mesh refinement and mesh recoarsement into the traditional structured mesh subdivision. By refining the horizontal grids, the singularity owing to the point source is minimized and the topography is simulated. By recoarsening the horizontal grids, the number of grid cells is reduced significantly and computational efficiency is improved. Model tests show that the proposed method solves the singularity problem and reduces the number of grid cells by 80% compared to the uniform grid refinement.展开更多
The principle of direct method used in optimal control problem is introduced. Details of applying this method to flight trajectory generation are presented including calculation of velocity and controls histories. And...The principle of direct method used in optimal control problem is introduced. Details of applying this method to flight trajectory generation are presented including calculation of velocity and controls histories. And capabilities of flight and propulsion systems are considered also. Combined with digital terrain map technique, the direct method is applied to the three dimensional trajectory optimization for low altitude penetration, and simplex algorithm is used to solve the parameters in optimization. For the small number of parameters, the trajectory can be optimized in real time on board.展开更多
A novel algorithm, i.e. the fast alternating direction method of multipliers （ADMM）, is applied to solve the classical total-variation （ TV ）-based model for image reconstruction. First, the TV-based model is refo...A novel algorithm, i.e. the fast alternating direction method of multipliers （ADMM）, is applied to solve the classical total-variation （ TV ）-based model for image reconstruction. First, the TV-based model is reformulated as a linear equality constrained problem where the objective function is separable. Then, by introducing the augmented Lagrangian function, the two variables are alternatively minimized by the Gauss-Seidel idea. Finally, the dual variable is updated. Because the approach makes full use of the special structure of the problem and decomposes the original problem into several low-dimensional sub-problems, the per iteration computational complexity of the approach is dominated by two fast Fourier transforms. Elementary experimental results indicate that the proposed approach is more stable and efficient compared with some state-of-the-art algorithms.展开更多
Two methods based on a slight modification of the regular traffic assignmentalgorithms are proposed to directly compute turn flows instead of estimating them from link flows orobtaining them by expanding the networks....Two methods based on a slight modification of the regular traffic assignmentalgorithms are proposed to directly compute turn flows instead of estimating them from link flows orobtaining them by expanding the networks. The first one is designed on the path-turn incidencerelationship, and it is similar to the computational procedure of link flows. It applies to thetraffic assignment algorithms that can provide detailed path structures. The second utilizes thelink-turn incidence relationship and the conservation of flow on links, a law deriving from thisrelationship. It is actually an improved version of Dial's logit assignment algorithm. The proposedapproaches can avoid the shortcomings both of the estimation methods, e. g. Furness's model andFrator's model, and of the network-expanding method in precision, stability and computation scale.Finally, they are validated by numerical examples.展开更多
A new branch of hypergraph theory-directed hyperaph theory and a kind of new methods-dicomposition contraction(DCP, PDCP and GDC) methods are presented for solving hypernetwork problems.lts computing time is lower tha...A new branch of hypergraph theory-directed hyperaph theory and a kind of new methods-dicomposition contraction(DCP, PDCP and GDC) methods are presented for solving hypernetwork problems.lts computing time is lower than that of ECP method in several order of magnitude.展开更多
Al-Al3Ti composites were prepared by a direct reaction method, in which Al3Ti was formed by the reaction of Ti and Al in aluminum alloy melt. The morphology of Al3Ti changes apparently from the fine particle, needle-l...Al-Al3Ti composites were prepared by a direct reaction method, in which Al3Ti was formed by the reaction of Ti and Al in aluminum alloy melt. The morphology of Al3Ti changes apparently from the fine particle, needle-like to large block with the increase of Al3Ti content. The addition of magnesium can markedly change the morphology of Al3Ti and reduce their size. Short rod-like Al3Ti was formed and homogeneous distribution was obtained with the addition of 3 wt.% Mg. The effect of Al3Ti and Mg on the microstructure of Al-Al3Ti composites and the mechanism were also discussed.展开更多
Linear scan computed tomography （LCT） is of great benefit to online industrial scanning and security inspection due to its characteristics of straight-line source trajectory and high scanning speed. However, in prac...Linear scan computed tomography （LCT） is of great benefit to online industrial scanning and security inspection due to its characteristics of straight-line source trajectory and high scanning speed. However, in practical applications of LCT, there are challenges to image reconstruction due to limited-angle and insufficient data. In this paper, a new reconstruction algorithm based on total-variation （TV） minimization is developed to reconstruct images from limited-angle and insufficient data in LCT. The main idea of our approach is to reformulate a TV problem as a linear equality constrained problem where the objective function is separable, and then minimize its augmented Lagrangian function by using alternating direction method （ADM） to solve subproblems. The proposed method is robust and efficient in the task of reconstruction by showing the convergence of ADM. The numerical simulations and real data reconstructions show that the proposed reconstruction method brings reasonable performance and outperforms some previous ones when applied to an LCT imaging problem.展开更多
Measuring multi-directional waves with the wave gauge array is one of the fundamental and easily realised methods. In this paper, the wave gauge array is described and the effects of the gauge spacing, the array orien...Measuring multi-directional waves with the wave gauge array is one of the fundamental and easily realised methods. In this paper, the wave gauge array is described and the effects of the gauge spacing, the array orientations, etc. of the three array arrangements, i. e., linear array, T-type array and pentagon array, on the resolution of the directional spreading of waves, are investigated experimentally. This study can be used as a reference in the experimental study and the field measurement of directional waves.展开更多
In this paper, we consider the convergence of the generalized alternating direction method of multipliers（GADMM） for solving linearly constrained nonconvex minimization model whose objective contains coupled functio...In this paper, we consider the convergence of the generalized alternating direction method of multipliers（GADMM） for solving linearly constrained nonconvex minimization model whose objective contains coupled functions. Under the assumption that the augmented Lagrangian function satisfies the Kurdyka-Lojasiewicz inequality, we prove that the sequence generated by the GADMM converges to a critical point of the augmented Lagrangian function when the penalty parameter in the augmented Lagrangian function is sufficiently large. Moreover, we also present some sufficient conditions guaranteeing the sublinear and linear rate of convergence of the algorithm.展开更多
Endoscopic submucosal dissection(ESD)has been developed as a treatment for superficial gastrointestinal neoplasms,which can achieve en bloc resection regardless of the lesion size.However,ESD is technically difficult ...Endoscopic submucosal dissection(ESD)has been developed as a treatment for superficial gastrointestinal neoplasms,which can achieve en bloc resection regardless of the lesion size.However,ESD is technically difficult because endoscopists cannot bring their hand into the gastrointestinal tract,unlike surgeons in regular surgery.It is difficult to obtain sufficient tension in the dissection plane and a good field of vision.Therefore,ESD is associated with a long procedure time and a high risk of adverse events in comparison with endoscopic mucosal resection.Traction methods have been developed to provide sufficient tension for the dissection plane and a good field of vision during the ESD procedure.However,traction direction is limited in most traction methods,resulting in insufficient effect in some cases.Although traction direction is considered important,there have been few investigations of its effect.In the first half of this review,important traction methods are discussed,including traction direction.In second half,appropriate traction methods for each organ are considered.Other important considerations for traction method,such as ability to adjust traction strength,interference between traction device and endoscope,and the need for specialized devices are also discussed.展开更多
In this study, we use the direct discontinuous Galerkin method to solve the generalized Burgers-Fisher equation. The method is based on the direct weak formulation of the Burgers-Fisher equation. The two adjacent cell...In this study, we use the direct discontinuous Galerkin method to solve the generalized Burgers-Fisher equation. The method is based on the direct weak formulation of the Burgers-Fisher equation. The two adjacent cells are jointed by a numerical flux that includes the convection numerical flux and the diffusion numerical flux. We solve the ordinary differential equations arising in the direct Galerkin method by using the strong stability preserving Runge^Kutta method. Numerical results are compared with the exact solution and the other results to show the accuracy and reliability of the method.展开更多
From measurements by a circular array consisting of 18 wave gauges in a large wave tank, directional spectra of wind-generated waves in deep water are systematically determined by using maximum likehood method.The inv...From measurements by a circular array consisting of 18 wave gauges in a large wave tank, directional spectra of wind-generated waves in deep water are systematically determined by using maximum likehood method.The investigations reveal that the angular spreading of the wave energy is consistent with cos2s(θ/2) proposed by Longuet-Higgins et al. (1963, Ocean Wad Spectra,11~136), if the bimodal distributions of wave energy are not taken into account. Bimodality occurring on higher frequency than peak frequency is too rare to affect our whole results. Surprisingly, a much broader directional spreading than that of the field, which is interpreted by the strongly nonlinear energy transfer because of the very young waves in laboratory, is found. The parameter s depends on frequency in the same way as observed by Mitsuyasu et al. (1975, Journal of Physical Oceanography, 5, 750~760)and Hasselmann et al. (1980, Journal of physical Oceanography, 10, 1264~1280) in the field, and the relationship between the four nondimensional parameters sm, fo, b1 and b2, determining the directional width, and (corresponding to the inverse of wave age) are given respectively. The observed distributions are found to agree well with the suggestion of Donelan et al. (1985, Philosophical Transaction of Royal Society of London, A315, 509~562) when applied to field waves.展开更多
This paper determines the exact error order on optimization of adaptive direct methods of approximate solution of the class of Fredholm integral equations of the second kind with kernel belonging to the anisotropic So...This paper determines the exact error order on optimization of adaptive direct methods of approximate solution of the class of Fredholm integral equations of the second kind with kernel belonging to the anisotropic Sobolev classes, and also gives an optimal algorithm.展开更多
Using the (2+1)-dimensional Broer-Kaup equation as an simple example, a new direct method is developed to find symmetry groups and symmetry algebras and then exact solutions of nonlinear mathematical physical equations.
To predict the dendrite morphology and microstructure evolution in the solidification of molten metal,numerically,lattice Boltzmann method(LBM)-cellular automata(CA)model has been developed by integrating the LBM to s...To predict the dendrite morphology and microstructure evolution in the solidification of molten metal,numerically,lattice Boltzmann method(LBM)-cellular automata(CA)model has been developed by integrating the LBM to solve the mass transport by diffusion and convection during solidification and the CA to determine the phase transformation with respect to the solid fraction based on the local equilibrium theory.It is successfully validated with analytic solutions such as Lipton-Glicksman-Kurz(LGK)model in static melt,and Oseen-Ivantsov solution under the fluid flow conditions in terms of tip radius and velocity of the dendrite growth.The proposed LBM-CA model does not only describe different types of dendrite formations with respect to various solidification conditions such as temperature gradient and growth rate,but also predict the primary dendrite arm spacing(PDAS)and the secondary dendrite arm spacing(SDAS),quantitatively,in directional solidification(DS)experiment with Ni-based superalloy.展开更多
A convenient method for methane(CH_(4))direct conversion to methanol(CH_(3)OH)is of great significance to use methane-rich resources,especially clathrates and stranded shale gas resources located in remote regions.The...A convenient method for methane(CH_(4))direct conversion to methanol(CH_(3)OH)is of great significance to use methane-rich resources,especially clathrates and stranded shale gas resources located in remote regions.Theoretically,the activation of CH_(4) and the selectivity to the CH_(3)OH product are challenging due to the extreme stability of CH_(4) and relatively high reactivity of CH_(3)OH.The state-of-the-art‘methane reforming-methanol synthesis’process adopts a two-step strategy to avoid the further reaction of CH_(3)OH under the harsh conditions required for CH_(4) activation.In the electrochemical field,researchers are trying to develop conversion pathways under mild conditions.They have found suitable catalysts to activate the C–H bonds in methane with the help of external charge and have designed the electrode reactions to continuously generate certain active oxygen species.These active oxygen species attack the activated methane and convert it to CH_(3)OH,with the benefit of avoiding over-oxidation of CH_(3)OH,and thus obtain a high conversion efficiency of CH_(4) to CH_(3)OH.This mini-review focuses on the advantages and challenges of electrochemical conversion of CH4 to CH_(3)OH,especially the strategies for supplying electro-generated active oxygen species in-situ to react with the activated methane.展开更多
Zeolite FAU composites with a macro/meso-microporous hierarchical structure were hydrothermally synthesized using macro-mesoporous γ-Al_2O_3 monolith as the substrate by means of the liquid crystallization directing...Zeolite FAU composites with a macro/meso-microporous hierarchical structure were hydrothermally synthesized using macro-mesoporous γ-Al_2O_3 monolith as the substrate by means of the liquid crystallization directing agent(LCDA) induced method. No template was needed throughout the synthesis processes. The structure and porosity of zeolite composites were analyzed by means of X-ray powder diffraction(XRD), scanning electron microscopy(SEM) and N_2adsorption-desorption isotherms. The results showed that the supported zeolite composites with varied zeolitic crystalline phases and different morphologies can be obtained by adjusting the crystallization parameters, such as the crystallization temperature, the composition and the alkalinity of the precursor solution. The presence of LCDA was defined as a determinant for synthesizing the zeolite composites. The mechanisms for formation of the hierarchically porous FAU zeolite composites in the LCDA induced synthesis process were discussed. The resulting monolithic zeolite with a trimodal-porous hierarchical structure shows potential applicability where facile diffusion is required.展开更多
A novel control method for a general class of nonlinear systems using fuzzy logic systems （FLSs） is presertted. Indirect and direct methods are combined to design the adaptive fuzzy output feedback controller and a ...A novel control method for a general class of nonlinear systems using fuzzy logic systems （FLSs） is presertted. Indirect and direct methods are combined to design the adaptive fuzzy output feedback controller and a high-gain observer is used to estimate the derivatives of the system output. The closed-loop system is proven to be semiglobally uniformly ultimately bounded. In addition, it is shown that if the approximation accuracy of the fuzzy logic system is high enough and the observer gain is chosen sufficiently large, an arbitrarily small tracking error can be achieved. Simulation results verify the effectiveness of the newly designed scheme and the theoretical discussion.展开更多
Electrical capacitance tomography(ECT)has been applied to two-phase flow measurement in recent years.Image reconstruction algorithms play an important role in the successful applications of ECT.To solve the ill-posed ...Electrical capacitance tomography(ECT)has been applied to two-phase flow measurement in recent years.Image reconstruction algorithms play an important role in the successful applications of ECT.To solve the ill-posed and nonlinear inverse problem of ECT image reconstruction,a new ECT image reconstruction method based on fast linearized alternating direction method of multipliers(FLADMM)is proposed in this paper.On the basis of theoretical analysis of compressed sensing(CS),the data acquisition of ECT is regarded as a linear measurement process of permittivity distribution signal of pipe section.A new measurement matrix is designed and L1 regularization method is used to convert ECT inverse problem to a convex relaxation problem which contains prior knowledge.A new fast alternating direction method of multipliers which contained linearized idea is employed to minimize the objective function.Simulation data and experimental results indicate that compared with other methods,the quality and speed of reconstructed images are markedly improved.Also,the dynamic experimental results indicate that the proposed algorithm can ful fill the real-time requirement of ECT systems in the application.展开更多
基金supports of the National Natural Science Foundation of China(Nos.12032008,12102080)the Fundamental Research Funds for the Central Universities,China(No.DUT23RC(3)038)are much appreciated。
文摘Fatigue analysis of engine turbine blade is an essential issue.Due to various uncertainties during the manufacture and operation,the fatigue damage and life of turbine blade present randomness.In this study,the randomness of structural parameters,working condition and vibration environment are considered for fatigue life predication and reliability assessment.First,the lowcycle fatigue problem is modelled as stochastic static system with random parameters,while the high-cycle fatigue problem is considered as stochastic dynamic system under random excitations.Then,to deal with the two failure modes,the novel Direct Probability Integral Method(DPIM)is proposed,which is efficient and accurate for solving stochastic static and dynamic systems.The probability density functions of accumulated damage and fatigue life of turbine blade for low-cycle and high-cycle fatigue problems are achieved,respectively.Furthermore,the time–frequency hybrid method is advanced to enhance the computational efficiency for governing equation of system.Finally,the results of typical examples demonstrate high accuracy and efficiency of the proposed method by comparison with Monte Carlo simulation and other methods.It is indicated that the DPIM is a unified method for predication of random fatigue life for low-cycle and highcycle fatigue problems.The rotational speed,density,fatigue strength coefficient,and fatigue plasticity index have a high sensitivity to fatigue reliability of engine turbine blade.
基金financially supported by the National Natural Science Foundation of China(No.41574127 and 41174104)the National Key Technology R&D Program for the 13th five-year plan(No.2016ZX05018006-006)
文摘To deal with the problem of low computational precision at the nodes near the source and satisfy the requirements for computational efficiency in inversion imaging and finite-element numerical simulations of the direct current method, we propose a new mesh refinement and recoarsement method for a two-dimensional point source. We introduce the mesh refinement and mesh recoarsement into the traditional structured mesh subdivision. By refining the horizontal grids, the singularity owing to the point source is minimized and the topography is simulated. By recoarsening the horizontal grids, the number of grid cells is reduced significantly and computational efficiency is improved. Model tests show that the proposed method solves the singularity problem and reduces the number of grid cells by 80% compared to the uniform grid refinement.
文摘The principle of direct method used in optimal control problem is introduced. Details of applying this method to flight trajectory generation are presented including calculation of velocity and controls histories. And capabilities of flight and propulsion systems are considered also. Combined with digital terrain map technique, the direct method is applied to the three dimensional trajectory optimization for low altitude penetration, and simplex algorithm is used to solve the parameters in optimization. For the small number of parameters, the trajectory can be optimized in real time on board.
基金The Scientific Research Foundation of Nanjing University of Posts and Telecommunications(No.NY210049)
文摘A novel algorithm, i.e. the fast alternating direction method of multipliers （ADMM）, is applied to solve the classical total-variation （ TV ）-based model for image reconstruction. First, the TV-based model is reformulated as a linear equality constrained problem where the objective function is separable. Then, by introducing the augmented Lagrangian function, the two variables are alternatively minimized by the Gauss-Seidel idea. Finally, the dual variable is updated. Because the approach makes full use of the special structure of the problem and decomposes the original problem into several low-dimensional sub-problems, the per iteration computational complexity of the approach is dominated by two fast Fourier transforms. Elementary experimental results indicate that the proposed approach is more stable and efficient compared with some state-of-the-art algorithms.
文摘Two methods based on a slight modification of the regular traffic assignmentalgorithms are proposed to directly compute turn flows instead of estimating them from link flows orobtaining them by expanding the networks. The first one is designed on the path-turn incidencerelationship, and it is similar to the computational procedure of link flows. It applies to thetraffic assignment algorithms that can provide detailed path structures. The second utilizes thelink-turn incidence relationship and the conservation of flow on links, a law deriving from thisrelationship. It is actually an improved version of Dial's logit assignment algorithm. The proposedapproaches can avoid the shortcomings both of the estimation methods, e. g. Furness's model andFrator's model, and of the network-expanding method in precision, stability and computation scale.Finally, they are validated by numerical examples.
文摘A new branch of hypergraph theory-directed hyperaph theory and a kind of new methods-dicomposition contraction(DCP, PDCP and GDC) methods are presented for solving hypernetwork problems.lts computing time is lower than that of ECP method in several order of magnitude.
文摘Al-Al3Ti composites were prepared by a direct reaction method, in which Al3Ti was formed by the reaction of Ti and Al in aluminum alloy melt. The morphology of Al3Ti changes apparently from the fine particle, needle-like to large block with the increase of Al3Ti content. The addition of magnesium can markedly change the morphology of Al3Ti and reduce their size. Short rod-like Al3Ti was formed and homogeneous distribution was obtained with the addition of 3 wt.% Mg. The effect of Al3Ti and Mg on the microstructure of Al-Al3Ti composites and the mechanism were also discussed.
基金the National High Technology Research and Development Program of China(Grant No.2012AA011603)
文摘Linear scan computed tomography （LCT） is of great benefit to online industrial scanning and security inspection due to its characteristics of straight-line source trajectory and high scanning speed. However, in practical applications of LCT, there are challenges to image reconstruction due to limited-angle and insufficient data. In this paper, a new reconstruction algorithm based on total-variation （TV） minimization is developed to reconstruct images from limited-angle and insufficient data in LCT. The main idea of our approach is to reformulate a TV problem as a linear equality constrained problem where the objective function is separable, and then minimize its augmented Lagrangian function by using alternating direction method （ADM） to solve subproblems. The proposed method is robust and efficient in the task of reconstruction by showing the convergence of ADM. The numerical simulations and real data reconstructions show that the proposed reconstruction method brings reasonable performance and outperforms some previous ones when applied to an LCT imaging problem.
文摘Measuring multi-directional waves with the wave gauge array is one of the fundamental and easily realised methods. In this paper, the wave gauge array is described and the effects of the gauge spacing, the array orientations, etc. of the three array arrangements, i. e., linear array, T-type array and pentagon array, on the resolution of the directional spreading of waves, are investigated experimentally. This study can be used as a reference in the experimental study and the field measurement of directional waves.
基金Supported by the National Natural Science Foundation of China(Grant Nos.1157117811801455)the Fundamental Research Funds of China West Normal University(Grant No.17E084)
文摘In this paper, we consider the convergence of the generalized alternating direction method of multipliers（GADMM） for solving linearly constrained nonconvex minimization model whose objective contains coupled functions. Under the assumption that the augmented Lagrangian function satisfies the Kurdyka-Lojasiewicz inequality, we prove that the sequence generated by the GADMM converges to a critical point of the augmented Lagrangian function when the penalty parameter in the augmented Lagrangian function is sufficiently large. Moreover, we also present some sufficient conditions guaranteeing the sublinear and linear rate of convergence of the algorithm.
文摘Endoscopic submucosal dissection(ESD)has been developed as a treatment for superficial gastrointestinal neoplasms,which can achieve en bloc resection regardless of the lesion size.However,ESD is technically difficult because endoscopists cannot bring their hand into the gastrointestinal tract,unlike surgeons in regular surgery.It is difficult to obtain sufficient tension in the dissection plane and a good field of vision.Therefore,ESD is associated with a long procedure time and a high risk of adverse events in comparison with endoscopic mucosal resection.Traction methods have been developed to provide sufficient tension for the dissection plane and a good field of vision during the ESD procedure.However,traction direction is limited in most traction methods,resulting in insufficient effect in some cases.Although traction direction is considered important,there have been few investigations of its effect.In the first half of this review,important traction methods are discussed,including traction direction.In second half,appropriate traction methods for each organ are considered.Other important considerations for traction method,such as ability to adjust traction strength,interference between traction device and endoscope,and the need for specialized devices are also discussed.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61105130 and 61175124)
文摘In this study, we use the direct discontinuous Galerkin method to solve the generalized Burgers-Fisher equation. The method is based on the direct weak formulation of the Burgers-Fisher equation. The two adjacent cells are jointed by a numerical flux that includes the convection numerical flux and the diffusion numerical flux. We solve the ordinary differential equations arising in the direct Galerkin method by using the strong stability preserving Runge^Kutta method. Numerical results are compared with the exact solution and the other results to show the accuracy and reliability of the method.
文摘From measurements by a circular array consisting of 18 wave gauges in a large wave tank, directional spectra of wind-generated waves in deep water are systematically determined by using maximum likehood method.The investigations reveal that the angular spreading of the wave energy is consistent with cos2s(θ/2) proposed by Longuet-Higgins et al. (1963, Ocean Wad Spectra,11~136), if the bimodal distributions of wave energy are not taken into account. Bimodality occurring on higher frequency than peak frequency is too rare to affect our whole results. Surprisingly, a much broader directional spreading than that of the field, which is interpreted by the strongly nonlinear energy transfer because of the very young waves in laboratory, is found. The parameter s depends on frequency in the same way as observed by Mitsuyasu et al. (1975, Journal of Physical Oceanography, 5, 750~760)and Hasselmann et al. (1980, Journal of physical Oceanography, 10, 1264~1280) in the field, and the relationship between the four nondimensional parameters sm, fo, b1 and b2, determining the directional width, and (corresponding to the inverse of wave age) are given respectively. The observed distributions are found to agree well with the suggestion of Donelan et al. (1985, Philosophical Transaction of Royal Society of London, A315, 509~562) when applied to field waves.
基金Project supported by the Natural Science Foundation of China(10371009)Research Fund for the Doctoral Program Higher Education
文摘This paper determines the exact error order on optimization of adaptive direct methods of approximate solution of the class of Fredholm integral equations of the second kind with kernel belonging to the anisotropic Sobolev classes, and also gives an optimal algorithm.
文摘Using the (2+1)-dimensional Broer-Kaup equation as an simple example, a new direct method is developed to find symmetry groups and symmetry algebras and then exact solutions of nonlinear mathematical physical equations.
基金financially supported by the Ministry of Trade,Industry,and Energy(MOTIE),Korea,under the“Digital manufacturing platform(Digi Ma P)”(reference number N0002598)supervised by the Korea Institute for Advancement of Technology(KIAT)supported by the National Research Foundation of Korea(NRF)grant funded by the Korean government(2019R1A2C4070160)。
文摘To predict the dendrite morphology and microstructure evolution in the solidification of molten metal,numerically,lattice Boltzmann method(LBM)-cellular automata(CA)model has been developed by integrating the LBM to solve the mass transport by diffusion and convection during solidification and the CA to determine the phase transformation with respect to the solid fraction based on the local equilibrium theory.It is successfully validated with analytic solutions such as Lipton-Glicksman-Kurz(LGK)model in static melt,and Oseen-Ivantsov solution under the fluid flow conditions in terms of tip radius and velocity of the dendrite growth.The proposed LBM-CA model does not only describe different types of dendrite formations with respect to various solidification conditions such as temperature gradient and growth rate,but also predict the primary dendrite arm spacing(PDAS)and the secondary dendrite arm spacing(SDAS),quantitatively,in directional solidification(DS)experiment with Ni-based superalloy.
基金support from National Science Foundation of China(No.22075012).
文摘A convenient method for methane(CH_(4))direct conversion to methanol(CH_(3)OH)is of great significance to use methane-rich resources,especially clathrates and stranded shale gas resources located in remote regions.Theoretically,the activation of CH_(4) and the selectivity to the CH_(3)OH product are challenging due to the extreme stability of CH_(4) and relatively high reactivity of CH_(3)OH.The state-of-the-art‘methane reforming-methanol synthesis’process adopts a two-step strategy to avoid the further reaction of CH_(3)OH under the harsh conditions required for CH_(4) activation.In the electrochemical field,researchers are trying to develop conversion pathways under mild conditions.They have found suitable catalysts to activate the C–H bonds in methane with the help of external charge and have designed the electrode reactions to continuously generate certain active oxygen species.These active oxygen species attack the activated methane and convert it to CH_(3)OH,with the benefit of avoiding over-oxidation of CH_(3)OH,and thus obtain a high conversion efficiency of CH_(4) to CH_(3)OH.This mini-review focuses on the advantages and challenges of electrochemical conversion of CH4 to CH_(3)OH,especially the strategies for supplying electro-generated active oxygen species in-situ to react with the activated methane.
基金the financial support from the National Natural Science Foundation of China(No.20973022 and No.11472048)the State Key Laboratory of Catalytic Materials and Reaction Engineering(RIPP,SINOPEC)(Serial No.33600000-14-ZC0607-0006)
文摘Zeolite FAU composites with a macro/meso-microporous hierarchical structure were hydrothermally synthesized using macro-mesoporous γ-Al_2O_3 monolith as the substrate by means of the liquid crystallization directing agent(LCDA) induced method. No template was needed throughout the synthesis processes. The structure and porosity of zeolite composites were analyzed by means of X-ray powder diffraction(XRD), scanning electron microscopy(SEM) and N_2adsorption-desorption isotherms. The results showed that the supported zeolite composites with varied zeolitic crystalline phases and different morphologies can be obtained by adjusting the crystallization parameters, such as the crystallization temperature, the composition and the alkalinity of the precursor solution. The presence of LCDA was defined as a determinant for synthesizing the zeolite composites. The mechanisms for formation of the hierarchically porous FAU zeolite composites in the LCDA induced synthesis process were discussed. The resulting monolithic zeolite with a trimodal-porous hierarchical structure shows potential applicability where facile diffusion is required.
基金This project was supported by the National Natural Science Foundation of China (90405011).
文摘A novel control method for a general class of nonlinear systems using fuzzy logic systems （FLSs） is presertted. Indirect and direct methods are combined to design the adaptive fuzzy output feedback controller and a high-gain observer is used to estimate the derivatives of the system output. The closed-loop system is proven to be semiglobally uniformly ultimately bounded. In addition, it is shown that if the approximation accuracy of the fuzzy logic system is high enough and the observer gain is chosen sufficiently large, an arbitrarily small tracking error can be achieved. Simulation results verify the effectiveness of the newly designed scheme and the theoretical discussion.
基金Supported by the National Natural Science Foundation of China(61203021)the Key Science and Technology Program of Liaoning Province(2011216011)+1 种基金the Natural Science Foundation of Liaoning Province(2013020024)the Program for Liaoning Excellent Talents in Universities(LJQ2015061)
文摘Electrical capacitance tomography(ECT)has been applied to two-phase flow measurement in recent years.Image reconstruction algorithms play an important role in the successful applications of ECT.To solve the ill-posed and nonlinear inverse problem of ECT image reconstruction,a new ECT image reconstruction method based on fast linearized alternating direction method of multipliers(FLADMM)is proposed in this paper.On the basis of theoretical analysis of compressed sensing(CS),the data acquisition of ECT is regarded as a linear measurement process of permittivity distribution signal of pipe section.A new measurement matrix is designed and L1 regularization method is used to convert ECT inverse problem to a convex relaxation problem which contains prior knowledge.A new fast alternating direction method of multipliers which contained linearized idea is employed to minimize the objective function.Simulation data and experimental results indicate that compared with other methods,the quality and speed of reconstructed images are markedly improved.Also,the dynamic experimental results indicate that the proposed algorithm can ful fill the real-time requirement of ECT systems in the application.
