期刊文献+
共找到1,202篇文章
< 1 2 61 >
每页显示 20 50 100
Optimal guidance strategy for flexible load based on hybrid direct load control and time of use 被引量:4
1
作者 Siyang Liu Yuan Gao +2 位作者 Hejun Yang Xinghua Xie Yinghao Ma 《Global Energy Interconnection》 EI CSCD 2023年第3期297-307,共11页
The time-of-use(TOU)strategy can effectively improve the energy consumption mode of customers,reduce the peak-valley difference of load curve,and optimize the allocation of energy resources.This study presents an Opti... The time-of-use(TOU)strategy can effectively improve the energy consumption mode of customers,reduce the peak-valley difference of load curve,and optimize the allocation of energy resources.This study presents an Optimal guidance mechanism of the flexible load based on strategies of direct load control and time-of-use.First,this study proposes a period partitioning model,which is based on a moving boundary technique with constraint factors,and the Dunn Validity Index(DVI)is used as the objective to solve the period partitioning.Second,a control strategy for the curtailable flexible load is investigated,and a TOU strategy is utilized for further modifying load curve.Third,a price demand response strategy for adjusting transferable load is proposed in this paper.Finally,through the case study analysis of typical daily flexible load curve,the efficiency and correctness of the proposed method and model are validated and proved. 展开更多
关键词 Flexible load Optimal demand response strategy Time of use Period partitioning direct load control
在线阅读 下载PDF
Direct loading of atoms from a macroscopic quadrupole magnetic trap into a microchip trap 被引量:1
2
作者 程俊 张敬芳 +2 位作者 许忻平 张海潮 王育竹 《Chinese Physics B》 SCIE EI CAS CSCD 2017年第3期315-320,共6页
We demonstrate the direct loading of cold atoms into a microchip 2-mm Z-trap, where the evaporative cooling can be performed efficiently, from a macroscopic quadrupole magnetic trap with a high loading efficiency. The... We demonstrate the direct loading of cold atoms into a microchip 2-mm Z-trap, where the evaporative cooling can be performed efficiently, from a macroscopic quadrupole magnetic trap with a high loading efficiency. The macroscopic quadrupole magnetic trap potential is designed to be moveable by controlling the currents of the two pairs of anti-Helrnholtz coils. The cold atoms are initially prepared in a standard six-beam magneto-optical trap and loaded into the macroscopic quadrupole magnetic trap, and then transported to the atom chip surface by moving the macroscopic trap potential. By means of a three-dimensional absorption imaging system, we are able to optimize the position alignment of the atom cloud in the macroscopic trap and the microchip Z-shaped wire. Consequently, with a proper magnetic transfer scheme, we load the cold atoms into the microchip Z-trap directly and efficiently. The loading efficiency is measured to be about 50%. This approach can be used to generate appropriate ultracold atoms sources, for example, for a magnetically guided atom interferometer based on atom chip. 展开更多
关键词 atom chip three-dimensional absorption imaging direct magnetic loading
原文传递
Fault Location Method for Overhead Feeders with Distributed Generation Units Based on Direct Load Flow Approach 被引量:1
3
作者 Charalampos G.Arsoniadis Vassilis C.Nikolaidis 《Journal of Modern Power Systems and Clean Energy》 SCIE EI CSCD 2024年第4期1135-1146,共12页
This paper proposes a novel fault location method for overhead feeders,which is based on the direct load flow approach.The method is developed in the phase domain to effectively deal with unbalanced network conditions... This paper proposes a novel fault location method for overhead feeders,which is based on the direct load flow approach.The method is developed in the phase domain to effectively deal with unbalanced network conditions,while it can also handle any type of distributed generation(DG)units without requiring equivalent models.By utilizing the line series parameters and synchronized or unsynchronized voltage and current phasor measurements taken from the sources,the method reliably identifies the most probable faulty sections.With the aid of an index,the exact faulty section among the multiple candidates is determined.Extensive simulation studies for the IEEE 123-bus test feeder demonstrate that the proposed method accu-rately estimates the fault position under numerous short-circuit conditions with varying prefault system loading conditions,fault resistances,and measurement errors.The proposed method is promising for practical applications due to the limited number of required measurement devices as well as the short computation time. 展开更多
关键词 Fault location distribution system direct load flow distributed generation
原文传递
Direct load control by distributed imperialist competitive algorithm 被引量:4
4
作者 Fengji LUO Junhua ZHAO +3 位作者 Haiming WANG Xiaojiao TONG Yingying CHEN Zhao Yang DONG 《Journal of Modern Power Systems and Clean Energy》 SCIE EI 2014年第4期385-395,共11页
Demand side management techniques have drawn significant attentions along with the development of smart grid.This paper proposes a new direct load control(DLC)model for scheduling interruptible air conditioner loads.T... Demand side management techniques have drawn significant attentions along with the development of smart grid.This paper proposes a new direct load control(DLC)model for scheduling interruptible air conditioner loads.The model is coordinated with the unit commitment and economic dispatch to minimize the total operation cost over the whole dispatch horizon.The network constraints are also considered in the model.To ensure the thermal comfort of the occupants,we are among the first to incorporate the advanced two-parameter thermal inertia dynamical model of customer houses into the DLC model to calculate the indoor temperature variation.This paper also proposes a distributed imperialist competitive algorithm to effectively solve the model.The simulation studies prove the efficiency of the proposed methodology. 展开更多
关键词 direct load control Imperialist competitive algorithm Demand side management
原文传递
Optimal day-ahead scheduling strategy of microgrid considering regional pollution and potential load curtailment
5
作者 Xinghua Xie Hejun Yang +3 位作者 Bo Wang Yinghao Ma Dabo Zhang Yuming Shen 《Global Energy Interconnection》 EI CSCD 2024年第6期749-760,共12页
With the frequent occurrence of global warming and extreme severe weather,the transition of energy to cleaner,and with lower carbon has gradually become a consensus.Microgrids can integrate multiple energy sources and... With the frequent occurrence of global warming and extreme severe weather,the transition of energy to cleaner,and with lower carbon has gradually become a consensus.Microgrids can integrate multiple energy sources and consume renewable energy locally.The amount of pollutants emitted during the operation of the microgrids become an important issue to be considered.This study proposes an optimal day-ahead scheduling strategy of microgrid considering regional pollution and potential load curtailment.First,considering the operating characteristics of microgrids in islanded and grid-connected operation modes,this study proposes a regional pollution index(RPI)to quantify the impact of pollutants emitted from microgrid on the environment,and further proposes a penalty mechanism based on the RPI to reduce the microgrid’s utilization on non-clean power supplies.Second,considering the benefits of microgrid as the operating entity,utilizing a direct load control(DLC)enables microgrid to enhance power transfer capabilities to the grid under the penalty mechanism based on RPI.Finally,an optimal day-ahead scheduling strategy which considers both the load curtailment potential of curtailable loads and RPI is proposed,and the results show that the proposed optimal day-ahead scheduling strategy can effectively inspire the curtailment potential of curtailable loads in the microgrid,reducing pollutant emissions from the microgrid. 展开更多
关键词 MICROGRID Demand response direct load control Pollutant emission
在线阅读 下载PDF
Numerical study of AE and DRA methods in sandstone and granite in orthogonal loading directions 被引量:5
6
作者 Xu-hua REN Hai-jun WANG Ji-xun ZHANG 《Water Science and Engineering》 EI CAS 2012年第1期93-104,共12页
The directional dependency of the acoustic emission (AE) and deformation rate analysis (DRA) methods was analyzed, based on the contact bond model in the two-dimensional particle flow code (PFC2D) in two types o... The directional dependency of the acoustic emission (AE) and deformation rate analysis (DRA) methods was analyzed, based on the contact bond model in the two-dimensional particle flow code (PFC2D) in two types of rocks, the coarse-grained sandstone and Aue granite. Each type of rocks had two shapes, the Brazilian disk and a square shape. The mechanical behaviors of the numerical model had already been verified to be in agreement with those of the physical specimens in previous research. Three loading protocols with different loading cycles in two orthogonal directions were specially designed in the numerical tests. The results show that no memory effect is observed in the second loading in the orthogonal direction. However, both the cumulative crack number of the second loading and the differential strain value at the inflection point are influenced by the first loading in the orthogonal direction. 展开更多
关键词 Kaiser effect deformation rate analysis PFC2D orthogonal loading directions in situ stress measurement
在线阅读 下载PDF
Constitutive Models for Compressive Deformation of AZ80Magnesium Alloy under Multiple Loading Directions and Strain Rates 被引量:2
7
作者 Xu-qing CHANG Li-ying ZHANG +1 位作者 Yong-biao YANG Jing-li REN 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2016年第1期64-68,共5页
Two constitutive models,the modified Johnson-Cook model and the logarithm linear relation model based on empirical approach and data analysis,were presented to illustrate compressive deformation of magnesium alloys AZ... Two constitutive models,the modified Johnson-Cook model and the logarithm linear relation model based on empirical approach and data analysis,were presented to illustrate compressive deformation of magnesium alloys AZ80 under multiple loading directions and strain rates.The results of stress-strain curve analysis and sensitivity index analysis suggested that the stress held large fluctuations in loading direction of 90°.Model testing signified that the logarithm linear relation model was more proper than the modified Johnson-Cook model in view of relative mean square error and correlation coefficients.Moreover,numerical simulation building on established models also indicated that the logarithm linear model is more precise than the modified Johnson-Cook model. 展开更多
关键词 AZ80magnesium alloy constitutive model modified Johnson-Cook model loading direction
原文传递
Development of a dynamic load direct shear apparatus for the study of permafrost
8
作者 YingHui Cui JianKun Liu Peng Lv 《Research in Cold and Arid Regions》 CSCD 2013年第4期399-403,共5页
The dynamic parameters of permafrost are crucial to and directly affect the accuracy of engineering design and numerical simulation. This paper describes a new dynamic load direct shear apparatus that was developed to... The dynamic parameters of permafrost are crucial to and directly affect the accuracy of engineering design and numerical simulation. This paper describes a new dynamic load direct shear apparatus that was developed to measure these parameters. The power systems and measurement and control systems of the device are described, as is a successful validation experiment. The results show that this dynamic load direct shearing device can accurately derive dynamic shear parameters within a certain range of frequencies and ampli- tudes of shear load. 展开更多
关键词 PERMAFROST dynamic load direct shear apparatus dynamic parameters
在线阅读 下载PDF
The Application of Reliability Based Optimization of Tophat Stiffened Composite Panels Subject to Bi-Directional Buckling Loads
9
作者 Xiaoguang Xue Guoxi Li +1 位作者 Adam James Sobey Ramanand Ajit Shenoi 《材料科学与工程(中英文B版)》 2013年第11期721-733,共13页
关键词 复合材料加筋板 可靠性优化 应用程序 屈曲荷载 复合材料结构 屈曲临界载荷 设计问题 计算效率
在线阅读 下载PDF
Oblique and Multi-Directional Random Wave Loads on Vertical Breakwaters 被引量:3
10
作者 俞聿修 李本霞 张宁川 《海洋工程:英文版》 2003年第2期189-202,共14页
Extensive 3-D model tests have been performed to study the effects of wave obliquity and multi-directionality on the wave loads acting on vertical breakwaters. The variation of horizontal and uplift forces acting on a... Extensive 3-D model tests have been performed to study the effects of wave obliquity and multi-directionality on the wave loads acting on vertical breakwaters. The variation of horizontal and uplift forces acting on an unit length of a breakwater with wave direction, the longitudinal distribution of wave forces, as well as the longitudinal load reduction are analyzed. Some empirical formulae of the longitudinal distribution coefficient and the longitudinal load reduction factor are presented for practical use. 展开更多
关键词 vertical breakwaters oblique wave multi-directional random wave longitudinal distribution wave forces longitudinal load reduction
在线阅读 下载PDF
浅圆仓装配式混凝土仓顶结构竖向承载性能试验研究
11
作者 庞瑞 张盼盼 +5 位作者 陈桂香 张毅斌 郭呈周 杨艺杰 张天鹏 黄彬 《建筑结构》 北大核心 2025年第14期80-86,共7页
基于分布式连接全装配RC楼盖体系,提出了一种构件标准化程度高和建造效率高的浅圆仓装配式钢筋混凝土仓顶结构(简称装配式混凝土仓顶结构)。为研究装配式混凝土仓顶结构的竖向承载性能,进行了装配式混凝土仓顶结构足尺模型在竖向均布荷... 基于分布式连接全装配RC楼盖体系,提出了一种构件标准化程度高和建造效率高的浅圆仓装配式钢筋混凝土仓顶结构(简称装配式混凝土仓顶结构)。为研究装配式混凝土仓顶结构的竖向承载性能,进行了装配式混凝土仓顶结构足尺模型在竖向均布荷载下的静载试验,分析了试件的破坏形态、挠曲变形以及混凝土和钢板(筋)应变分布规律等。结果表明:设计荷载下结构未出现明显破坏征兆,可满足承载力和正常使用极限状态要求,表明装配式混凝土仓顶结构具有良好的竖向承载力和刚度。竖向荷载下,仓顶板裂缝均为环向裂缝;加载结束后,环向裂缝基本贯通,并伴随少量径向裂缝,仓顶板处于压弯受力状态。在设计荷载下钢筋、开孔板未屈服,梁-板连接节点、板缝连接节点未出现裂缝,各构件和连接件均处于良好的工作状态。 展开更多
关键词 浅圆仓装配式混凝土仓顶结构 竖向承载性能 板缝连接节点 横板向弯矩 静载试验
在线阅读 下载PDF
随机分布载荷作用下双向功能梯度材料悬臂梁的半解析模拟方法
12
作者 张龙 张伟 +1 位作者 范钧滔 廖文林 《复合材料科学与工程》 北大核心 2025年第9期16-26,共11页
为了研究随机分布载荷作用下的双向功能梯度材料(Functionally Graded Material,FGM)悬臂梁的力学行为,本文发展了一种高精度、高效率的半解析方法。首先介绍了双向FGM悬臂梁的物理模型,然后推导了其在随机分布载荷作用下的基本控制方程... 为了研究随机分布载荷作用下的双向功能梯度材料(Functionally Graded Material,FGM)悬臂梁的力学行为,本文发展了一种高精度、高效率的半解析方法。首先介绍了双向FGM悬臂梁的物理模型,然后推导了其在随机分布载荷作用下的基本控制方程,并通过MATLAB编程实现了方程组的迭代求解。在此基础上开展了单向/双向FGM悬臂梁受纯弯曲载荷或均布载荷的算例分析,并与精确解、铁木辛柯梁理论解和梯度有限元方法解对比研究,结果表明本文方法收敛性好、计算精度高。最后,将本文方法用于双向FGM悬臂梁受线性分布载荷、正弦分布载荷或随机分布载荷作用下的力学行为模拟仿真分析,所得结果与梯度有限元方法模拟结果吻合较好,最大挠度、应力相对误差分别为2.11%、3.39%。 展开更多
关键词 双向功能梯度材料 悬臂梁 随机分布载荷 半解析法 有限元方法 复合材料
在线阅读 下载PDF
智算中心供配电系统关键技术与发展路径研究
13
作者 高晓明 《现代建筑电气》 2025年第4期1-6,共6页
针对智算中心供配电系统,收集市场和行业碎片化的信息和经验,结合数据进行分析,归纳出匹配的电力接入、降低配电/IT面积比、全链路效率提升和负载动态冲击应对等关键技术,并对这些关键技术的发展路径做出系统性和前瞻性的提炼与预测。... 针对智算中心供配电系统,收集市场和行业碎片化的信息和经验,结合数据进行分析,归纳出匹配的电力接入、降低配电/IT面积比、全链路效率提升和负载动态冲击应对等关键技术,并对这些关键技术的发展路径做出系统性和前瞻性的提炼与预测。该研究对智算中心行业的上下游有一定的参考意义,并能对该行业的可持续发展起到一定的促进作用。 展开更多
关键词 智算中心 供配电系统 全链路 直流 负载动态冲击
在线阅读 下载PDF
大跨度游泳馆结构风荷载数值模拟研究
14
作者 孙香红 史忠冉 +1 位作者 纪颖颖 陈涛 《建筑科学与工程学报》 北大核心 2025年第4期22-30,共9页
为了研究体型复杂的大跨度游泳馆结构在风荷载作用下的风压变化规律,以西安某大跨度游泳馆结构为研究对象,采用风荷载数值模拟方法,对该游泳馆在不同湍流模型、不同风向角工况下的屋盖表面平均风压系数变化展开研究,分析湍流模型和风向... 为了研究体型复杂的大跨度游泳馆结构在风荷载作用下的风压变化规律,以西安某大跨度游泳馆结构为研究对象,采用风荷载数值模拟方法,对该游泳馆在不同湍流模型、不同风向角工况下的屋盖表面平均风压系数变化展开研究,分析湍流模型和风向角对游泳馆屋盖结构的影响;然后考虑不同区建筑物对该游泳馆平均风压系数的影响,分析得到其影响规律。结果表明:不同湍流模型对游泳馆屋盖的平均风压系数影响较小;在90°和270°风向角下,游泳馆整体模型的屋盖表面平均风压系数变化梯度平缓,平均风压系数基本维持在-0.5左右,而在其他风向角下,平均风压系数变化梯度明显;游泳馆屋檐凹进去的部分平均风压系数很小,甚至出现正风压的情况,而凸出来的弧形部分负风压较大;来流由低往高走时,前方较低矮的B区和C区对A区形成缓坡结构,有效抵挡了部分气流,从而降低了A区的风压,使得平均风压系数变化梯度相对平缓。 展开更多
关键词 大跨度结构 风荷载 数值模拟 风向角 平均风压系数
在线阅读 下载PDF
基于受力破坏建模的煤层工作面底板三维直流电法响应特征
15
作者 高卫富 邹旭 +2 位作者 牛超 肖乐乐 訾建潇 《煤田地质与勘探》 北大核心 2025年第9期204-216,共13页
【目的】近年来,华北型煤田底板突水事故频发,为了有效预防底板突水事故的发生,采场底板突水异常响应特征成为防治水研究的重点。【方法】基于矿山压力理论建立采场底板应力模型,分析采场底板应力分布及破坏特征,根据底板破坏特征将工... 【目的】近年来,华北型煤田底板突水事故频发,为了有效预防底板突水事故的发生,采场底板突水异常响应特征成为防治水研究的重点。【方法】基于矿山压力理论建立采场底板应力模型,分析采场底板应力分布及破坏特征,根据底板破坏特征将工作面底板分为压缩区、膨胀区、恢复区。采用岩样应力−电阻率测试法,测试岩样加压、破坏、恢复等状态下电阻率变化规律,模拟底板压缩区、膨胀区和恢复区岩层电阻率变化,确定工作面底板三区的电阻率取值,结合现场岩层电阻率变化,建立不同采动阶段底板电阻率时空演化的三维动态地电模型。利用三维直流电法正反演程序,对已建立的底板地电模型进行正反演计算,绘制底板异常响应三维电性图,研究工作面底板异常响应,总结工作面推进过程中底板异常响应特征。【结果】当工作面推进20 m时,异常地电模型出现应力异常区和低阻异常区,应力异常区出现在工作面回采位置前方,主要影响浅部地层,随着地层深度增加,应力异常区消失。低阻异常区影响深部地层,对浅部地层无影响;当工作面推进30 m时,应力异常区随着推采位置向前移动;低阻异常区与应力异常区相连,低阻区范围不断增大,视电阻率值不断减小,出现明显低阻异常响应,工作面底板发生突水可能性增大;当工作面推进50 m时,工作面出现两处低阻异常区,其中一处为应力异常区,该异常区随着推进位置向前移动;低阻异常区位于采空区,范围大,视电阻率值极低,与围岩差异明显,工作面底板极有可能发生突水。【结论】工作面推进过程中出现“应力异常响应”和“低阻异常响应”特征,其中,“应力异常响应”影响范围小,随着工作面推进不断向前移动;“低阻异常响应”影响范围大,视电阻率值与围岩电阻率差异大,随着工作面推进低阻区不断扩大。矿井水防治者应当及时采取防治水措施,防止工作面底板发生突水。 展开更多
关键词 底板破坏 岩样加载实验 三维直流电法 地电模型 底板异常响应 华北型煤田
在线阅读 下载PDF
沿海地区站台柱Y型雨棚风压分布特征研究 被引量:1
16
作者 彭仪普 于风晓 +1 位作者 谢稳江 陈立 《工业建筑》 2025年第3期196-203,共8页
站台柱雨棚是一种大跨度的空间结构,对风荷载的作用非常敏感,由于高铁站的功能比较特殊,沿海地区站台柱Y型雨棚与风荷载之间的相互作用研究也相对较少。为了研究沿海地区站台柱Y型雨棚表面的风压分布特征以及风载体型系数,通过计算流体... 站台柱雨棚是一种大跨度的空间结构,对风荷载的作用非常敏感,由于高铁站的功能比较特殊,沿海地区站台柱Y型雨棚与风荷载之间的相互作用研究也相对较少。为了研究沿海地区站台柱Y型雨棚表面的风压分布特征以及风载体型系数,通过计算流体动力学(Computational Fluid Dynamics,CFD)方法建立起雨棚的数值模拟模型进行分析。结果表明:运用CFD方法建立的数值模拟模型与已有文献中风洞实验结果吻合,可信度较高;在0°~90°方向角的作用下,雨棚上表面风压会随风向角的增大而增大,下表面风压变化范围不大,同时确定了最不利风向角为0°,在此风向角下雨棚会产生扭转破坏的趋势,影响雨棚的稳定性;在0°最不利风向角的条件下求得沿海地区Y型雨棚表面的风载体型系数,相邻雨棚对所研究的雨棚的风荷载几乎无影响。 展开更多
关键词 站台雨棚 数值模拟 计算流体动力学(CFD) 风压分布 风向角 风载体型系数
原文传递
一种电机直驱操动机构负载分析方法
17
作者 王潇 吴旭升 肖曦 《电气工程学报》 北大核心 2025年第1期37-45,共9页
以电机直驱高压真空断路器系统为模型,分别从运动学和动力学角度,推导了高压真空断路器的几何约束、运动特性,得到电机转子旋转运动与灭弧室动端竖直运动行程的映射关系。同时,对高压真空断路器各主要运动部件进行了受力分析,并建立起... 以电机直驱高压真空断路器系统为模型,分别从运动学和动力学角度,推导了高压真空断路器的几何约束、运动特性,得到电机转子旋转运动与灭弧室动端竖直运动行程的映射关系。同时,对高压真空断路器各主要运动部件进行了受力分析,并建立起电机直驱操动机构的负载模型。仿真和试验结果表明,所提电机直驱操动机构负载分析方法在最大转矩需求计算方面,能够为驱动电机及变换器容量设计提供理论指导,对于电机直驱操动机构行程曲线规划具有指导意义。 展开更多
关键词 操动机构 电机直驱 负载建模 断路器
在线阅读 下载PDF
铁路车流理论研究综述
18
作者 林柏梁 《大连交通大学学报》 2025年第3期1-18,78,共19页
铁路车流理论的核心工作是为运输组织决策提供支撑,即科学组织路网车流至不同去向和类型的列车中,兼顾货物的及时运达和机车车辆的高效周转。在过去的半个世纪,铁路车流理论得到长足发展,尤其是20世纪80年代以来,在理论体系构建和实践... 铁路车流理论的核心工作是为运输组织决策提供支撑,即科学组织路网车流至不同去向和类型的列车中,兼顾货物的及时运达和机车车辆的高效周转。在过去的半个世纪,铁路车流理论得到长足发展,尤其是20世纪80年代以来,在理论体系构建和实践应用方面均取得突破性进展。系统梳理了铁路车流理论的发展脉络,涵盖技术直达列车编组计划理论、装车地列车编组计划、车流径路、车流组织综合优化、空车调配、局域小车流组织优化及编组站内部车流接续优化、铁路车流理论的相关扩展、车流组织系统的相关应用现状等。在此基础上,进一步提出目前研究的不足与未来的发展方向,以期使铁路车流理论在提高运输效率、降低成本以及科学利用运输资源方面有更多的突破。 展开更多
关键词 铁路网 列车编组计划 车流径路 装车地直达列车 空车调配 编组站
在线阅读 下载PDF
基于声发射技术的柴油机气缸盖火力面铸造缺陷检测技术
19
作者 鲍君华 林嵩 《大连交通大学学报》 2025年第3期71-78,共8页
为了提高柴油机气缸盖水压试验的缺陷检测精度,引入声发射技术并进行声发射特性仿真。首先,应用ANSYS有限元软件对气缸盖火力面进行水压试验应力仿真,以确定声发射特性仿真中声源函数的幅值;其次,在COMSOL软件中建立声发射仿真模型,通... 为了提高柴油机气缸盖水压试验的缺陷检测精度,引入声发射技术并进行声发射特性仿真。首先,应用ANSYS有限元软件对气缸盖火力面进行水压试验应力仿真,以确定声发射特性仿真中声源函数的幅值;其次,在COMSOL软件中建立声发射仿真模型,通过设定声源函数、网格尺寸和仿真时步等条件,对气缸盖火力面进行声发射特性仿真,不仅揭示了弹性波的传播规律,还通过检测点的位移-时间曲线计算出弹性波的传播速度,侧面验证了COMSOL模拟声发射弹性波传播的可行性;最后,对测量点的位移信号进行短时傅里叶变换,结合灰铸铁板的频散曲线,确定弹性波传播过程中的主要频率及模态,从而为缺陷类型识别及尺寸评估提供理论依据。 展开更多
关键词 柴油机缸盖 声发射仿真 COMSOL 缺陷检测
在线阅读 下载PDF
双并列转子永磁直驱电机的设计及优化
20
作者 陶大军 刘鑫洋 +1 位作者 陈阳 戈宝军 《大电机技术》 2025年第5期32-38,共7页
针对二辊轧机等并行对驱类机械设备的驱动需求,设计了一台双并列转子连体定子永磁直驱电机,并研究了抑制空载转矩的方法,阐述了电机的基本结构,定义了耦合区内的关键设计参数,明确了电机的设计过程。在此基础上,对一台额定功率为1 120 k... 针对二辊轧机等并行对驱类机械设备的驱动需求,设计了一台双并列转子连体定子永磁直驱电机,并研究了抑制空载转矩的方法,阐述了电机的基本结构,定义了耦合区内的关键设计参数,明确了电机的设计过程。在此基础上,对一台额定功率为1 120 kW、额定转速为20 r/min的双并列转子永磁直驱电机进行了电磁设计,并通过仿真对所设计的方案进行了校核分析。针对空载转矩的不同分量,提出了相应的抑制方法。仿真结果表明,优化永磁体极弧系数可以抑制齿槽转矩;优化耦合区内的端部距离可以抑制端部效应力矩、永磁齿轮传递转矩,为双并列转子连体定子永磁直驱电机的开发和应用提供了参考。 展开更多
关键词 双并列转子 永磁直驱电机 耦合区 电磁设计 空载转矩
在线阅读 下载PDF
上一页 1 2 61 下一页 到第
使用帮助 返回顶部