This paper studies the interface curing stresses between polymethyl methacrylate (PMMA) and composite by means of digital speckle correlation method (DSCM).A new method by combining DSCM with the marker points is deve...This paper studies the interface curing stresses between polymethyl methacrylate (PMMA) and composite by means of digital speckle correlation method (DSCM).A new method by combining DSCM with the marker points is developed to measure the interface curing stresses,and the measurement principle is introduced.The interface curing stresses between PMMA and composite with different curing bonding conditions are measured and analyzed,this indicates that the residual stress for furnace heating and furnace cooling is the smallest.Finally,the measurement error is discussed by means of finite element method,the influences of glass microsphere between adhesive and PMMA can be ignored.展开更多
Conditional access system (CAS) is a key technical component in digital TV broadcasting through which TV op-erators manage the appropriate rights of different subscribers in order to protect their commercial benefits....Conditional access system (CAS) is a key technical component in digital TV broadcasting through which TV op-erators manage the appropriate rights of different subscribers in order to protect their commercial benefits. The normal digital TV receiver can only receive and decode the pay TV programs scrambled by one specific CAS. In this paper, the authors proposed a smartcard conditional access interface (SCAI) scheme in order to make the digital TV receiver be a common receiving platform independent of any specific CAS employed at the broadcasting head-end. As a result, it only needs to include a common condi-tional access software package (CCAP) without any requirement of hardware modification in the receiver. Comparison between the two mentioned DVB-CI-based schemes showed that the cost of such kind receiver is greatly reduced. The main design points of the proposed scheme and its reference implementation’s architecture are presented in this paper. This scheme is also one of the candidate national standards for Chinese digital TV broadcasting industry.展开更多
In this paper, a new control system based on forearm electromyogram （EMG） is proposed for computer peripheral control and artificial prosthesis control. This control system intends to realize the commands of six pre...In this paper, a new control system based on forearm electromyogram （EMG） is proposed for computer peripheral control and artificial prosthesis control. This control system intends to realize the commands of six pre-defined hand poses： up, down, left, right, yes, and no. In order to research the possibility of using a unified amplifier for both electroencephalogram （EEG） and EMG, the surface forearm EMG data is acquired by a 4-channel EEG measurement system. The Bayesian classifier is used to classify the power spectral density （PSD） of the signal. The experiment result verifies that this control system can supply a high command recognition rate （average 48%） even the EMG data is collected with an EEG system just with single electrode measurement.展开更多
Bio-sensor arrays for multi-channel recording have been developed recently and signal processing platforms for those signals have been studied actively.But it’s thereal situation which these technologies are generall...Bio-sensor arrays for multi-channel recording have been developed recently and signal processing platforms for those signals have been studied actively.But it’s thereal situation which these technologies are generally developed and studied respectively.So the interface design between recording array and signal processing platform is also an important issue to make bio-sensor signal processing system.In this paper,we proposed interface which has unique protocols to control sensor array and operate platform.There are two types of protocols in the interface.One is between sensor array and MCU in platform and the other is between MCU and board for wireless communication.Basically,each protocol has two kinds of modes(single,frame)and it can be extended if needed.展开更多
In recent years, computer assisted surgery （CAS） systems become more and more common in clinical practices, but few specific design criteria have been proposed for human-computer interface （HCI） in GAS systems. Th...In recent years, computer assisted surgery （CAS） systems become more and more common in clinical practices, but few specific design criteria have been proposed for human-computer interface （HCI） in GAS systems. This paper tried to give universal criteria of HCI design for CAS systems through introduction of demonstration application, which is total knee replacement （TKR） with a nonimage-based navigation system. A typical computer assisted process can be divided into four phases： the preoperative planning phase, the intraoperative registration phase, the intraoperative navigation phase and finally the postoperative assessment phase. The interface design for four steps is described respectively in the demonstration application. These criteria this paper summarized can be useful to software developers to achieve reliable and effective interfaces for new CAS systems more easily.展开更多
In a crumbling tech hub near the marginal coastline,young Angolan developers,despite the challenges of unreliable Internet and dependence on foreign APIs(application programming interfaces),are tapping on donated lapt...In a crumbling tech hub near the marginal coastline,young Angolan developers,despite the challenges of unreliable Internet and dependence on foreign APIs(application programming interfaces),are tapping on donated laptops,debugging health apps that alert rural clinics of disease outbreaks.Their resilience and determination in the face of such obstacles are not just a source of innovation,but also of inspiration and hope.展开更多
To improve the human-physical-virtual coordination and integration of the digital twin workshop,3D visual monitoring and human-computer interaction of the digital twin workshop was studied.First,a novel 6D model of th...To improve the human-physical-virtual coordination and integration of the digital twin workshop,3D visual monitoring and human-computer interaction of the digital twin workshop was studied.First,a novel 6D model of the 3D visualization interactive system for digital twin workshops is proposed.As the traditional 5D digital twin model ignores the importance of human-computer interaction,a new dimension of the user terminal was added.A hierarchical real-time data-driven mapping model for the workshop production process is then proposed.Moreover,a real-time data acquisition method for the industrial Internet of things is proposed based on OPC UA(object linking and embedding for process control unified architecture).Based on the 6D model of the system,the process of creating a 3D visualization virtual environment based on virtual reality is introduced,in addition to a data-driven process based on the data management cloud platform.Finally,the 6D model of the system was confirmed using the blade rotor test workshop as the object,and a 3D visualization interactive system is developed.The results show that the system is more transparent,real-time,data-driven and more efficient,as well as promotes the coordination and integration of human-physical-virtual,which has practical significance for developing digital twin workshops.展开更多
In the last two decades, tangible user interfaces （TUIs） have emerged as a new interface type that interlinks the digital and physical worlds. TUIs show a potential to enhance the way in which people interact with d...In the last two decades, tangible user interfaces （TUIs） have emerged as a new interface type that interlinks the digital and physical worlds. TUIs show a potential to enhance the way in which people interact with digital information. First, this paper exam- ines the existing body of work on tangible user interfaces and discusses their application domains, especially information visualiza- tion. Then it provides a definition of intuitive use and reviews formerly separated ideas on physicality. As interaction has an impact on the overall product experience, we also discuss whether intuitive use influences the users＇ aesthetic judgements of such products.展开更多
We are involved in an embarrassing situation that the limited capability of automated feature extraction in digital photogrammetric systems cannot satisfy the increasing needs for rapid acquisition of semantic informa...We are involved in an embarrassing situation that the limited capability of automated feature extraction in digital photogrammetric systems cannot satisfy the increasing needs for rapid acquisition of semantic information for applications. Facing this challenge, a new tactic, Human-Computer Collaborative (HCC) tactic, and a corresponding new method, Operator-Object Directed (OOD) method, are proposed for the design of a system for feature extraction from large scale aerial images. We hold that in almost all technical complex systems, full automation will be neither technically feasible nor socially acceptable. The system should be designed to optimize through the cooperative operation with two agents in the system: the hurtan and the computer.展开更多
Zinc ion batteries are considered as potential energy storage devices due to their advantages of low-cost,high-safety,and high theoretical capacity.However,dendrite growth and chemical corrosion occurring on Zn anode ...Zinc ion batteries are considered as potential energy storage devices due to their advantages of low-cost,high-safety,and high theoretical capacity.However,dendrite growth and chemical corrosion occurring on Zn anode limit their commercialization.These problems can be tackled through the optimization of the electrolyte.However,the screening of electrolyte additives using normal electrochemical methods is time-consuming and labor-intensive.Herein,a fast and simple method based on the digital holography is developed.It can realize the in situ monitoring of electrode/electrolyte interface and provide direct information concerning ion concentration evolution of the diffusion layer.It is effective and time-saving in estimating the homogeneity of the deposition layer and predicting the tendency of dendrite growth,thus able to value the applicability of electrolyte additives.The feasibility of this method is further validated by the forecast and evaluation of thioacetamide additive.Based on systematic characterization,it is proved that the introduction of thioacetamide can not only regulate the interficial ion flux to induce dendrite-free Zn deposition,but also construct adsorption molecule layers to inhibit side reactions of Zn anode.Being easy to operate,capable of in situ observation,and able to endure harsh conditions,digital holography method will be a promising approach for the interfacial investigation of other battery systems.展开更多
A brain-computer interface (BCI) facilitates bypassing the peripheral nervous system and directly communicating with surrounding devices. Navigation technology using BCI has developed-from exploring the prototype para...A brain-computer interface (BCI) facilitates bypassing the peripheral nervous system and directly communicating with surrounding devices. Navigation technology using BCI has developed-from exploring the prototype paradigm in the virtual environment (VE) to accurately completing the locomotion intention of the operator in the form of a powered wheelchair or mobile robot in a real environment. This paper summarizes BCI navigation applications that have been used in both real and VEs in the past 20 years. Horizontal comparisons were conducted between various paradigms applied to BCI and their unique signal-processing methods. Owing to the shift in the control mode from synchronous to asynchronous, the development trend of navigation applications in the VE was also reviewed. The contrast between high level commands and low-level commands is introduced as the main line to review the two major applications of BCI navigation in real environments: mobile robots and unmanned aerial vehicles (UAVs). Finally, applications of BCI navigation to scenarios outside the laboratory;research challenges, including human factors in navigation application interaction design;and the feasibility of hybrid BCI for BCI navigation are discussed in detail.展开更多
This paper investigates the reproduction of Chinese painting in the digital age. In particular, how does a website asan interface influence viewers’ response to a Chinese handscroll? The paper begins with a critical ...This paper investigates the reproduction of Chinese painting in the digital age. In particular, how does a website asan interface influence viewers’ response to a Chinese handscroll? The paper begins with a critical description of aweb interface of Freer Gallery of Art and Arthur M. Sackler Gallery, followed by an analysis of the originalpainting. Fishermen on an Autumn River, that the interface digitizes and displays. The last section points out theinfluence of digitization on the relationship between viewers and digital heritage.展开更多
Background With an increasing number of vehicles becoming autonomous,intelligent,and connected,paying attention to the future usage of car human-machine interface with these vehicles should become more relevant.Severa...Background With an increasing number of vehicles becoming autonomous,intelligent,and connected,paying attention to the future usage of car human-machine interface with these vehicles should become more relevant.Several studies have addressed car HMI but were less attentive to designing and implementing interactive glazing for every day(autonomous)driving contexts.Methods Reflecting on the literature,we describe an engineering psychology practice and the design of six novel future user scenarios,which envision the application of a specific set of augmented reality(AR)support user interactions.Additionally,we conduct evaluations on specific scenarios and experiential prototypes,which reveal that these AR scenarios aid the target user groups in experiencing a new type of interaction.The overall evaluation is positive with valuable assessment results and suggestions.Conclusions This study can interest applied psychology educators who aspire to teach how AR can be operationalized in a human-centered design process to students with minimal pre-existing expertise or minimal scientific knowledge in engineering psychology.展开更多
To simulate the satellite launch mission under a general platform which could be used in a full-digital mode as well as in a semi-physical way, is an important way to certify the mission design performance as well as ...To simulate the satellite launch mission under a general platform which could be used in a full-digital mode as well as in a semi-physical way, is an important way to certify the mission design performance as well as technical feasibilities, and it relates to complex system simulation methods such as multi-disciplinary coupling, multi-language modeling as well as interactive simulation and virtual simulation technologies. This paper introduces the design of a digital simulation platform for satellite launch mission verification.The platform has the advantages of high generality and extensibility, being easy to build up. The Functional Mockup Interface(FMI) Standard is adopted to achieve integration of multi-source models. A WebGL based 3D visual simulation tool is also adopted to implement the virtual display system which could display the rocket launch process and rocket-satellite separation with high fidelity 3D virtual scenes. A configuration tool was developed to map the 3D objects in the visual scene with simulation physical variables for complex rocket flight control mechanisms, which greatly improves the platform's generality and extensibility. Finally the real-time performance had been tested and the YL-1 launch mission was adopted to demonstrate the functions of the platform.The platform will be used to construct a digital twin system for satellite launch missions in the future.展开更多
Under the tide of information,UI design has become the core lever for measuring the quality of digital product experience.As various applications permeate daily life,the quality of interfaces has been in-creasingly ma...Under the tide of information,UI design has become the core lever for measuring the quality of digital product experience.As various applications permeate daily life,the quality of interfaces has been in-creasingly magnified.Researchers at home and abroad have devoted their efforts to this,distilling multiple sets of experience paradigms and operational guidelines.Regrettably,the mainstream thinking is still trapped in a two-dimensionalflat framework.When interaction technologies are advancing rapidly and functional in-formationflows are surging in a multi-dimensional and three-dimensional manner,the old logic can no longer fulfill the demand for a user-centered quality experience.First,an emotional indicator framework is established through human-computer engineering.In the weight setting part,the grey correlation is incorporated into the group analytic hierarchy process,and the modified analytic hierarchy process(AHP)is used to calculate the comprehensive weights,thereby weakening the subjectiveflaws of the traditional AHP.Then,in response to the ambiguity of the evaluation,the intuitionistic fuzzy set is integrated with the TOPSIS(technique for order preference by similarity to an ideal solution)ideal similarity ranking method to construct a new comprehensive evaluation model.This study verifies the applicability of human factors engineering in the emotional design of digital interfaces,providing a quantitative path and practical guidelines for the paradigm shift from“usability”to“empathy”.展开更多
The shear modulus of the adhesive layer and the failure mode of adhesive structure on single lap joint specimens under tensile tests are investigated in this paper.The aluminum-aluminum adherends are bonded by two dif...The shear modulus of the adhesive layer and the failure mode of adhesive structure on single lap joint specimens under tensile tests are investigated in this paper.The aluminum-aluminum adherends are bonded by two different adhesives:polydimethylsiloxane (PDMS) and epoxy.The full deformation fields are measured using the digital image correlation (DIC) method with the images on the middle part of the adhesive layer recorded by a high resolution microscope.Then,the shear modulus values of the two adhesives are calculated with a simple pure shear strain model.A numerical model is proposed to simulate the single lap joint structure under tensile load in comparison with the experimental results.The results show that this method can successfully estimate the shear modulus of the adhesive layer.The failure behavior of epoxy adhesive/adherend interface is also analyzed and discussed.展开更多
The strain distributions near the interface when the elbow steel fiber is pulled out from the half-mould concrete matrix are directly measured using a combined method of single fiber pull-out test and digital image co...The strain distributions near the interface when the elbow steel fiber is pulled out from the half-mould concrete matrix are directly measured using a combined method of single fiber pull-out test and digital image correlation. Meanwhile, the real-time processes of the bonding, debonding and sliding at the interface are observed. The micro-mechanism of the strain localization in the failure process of interface when debonding occurs and the strengthening mechanism at the imbedded fiber are discussed. The experimental results show that the meso-scale strain localization gives rise to the localization of shear damage near the fiber interface. This strain localization characterized by the debonding process near the interface occurs, develops and moves gradually at an apparently regular interval. At the elbow part of the imbedded fiber, the peak value of the shearing stress occurs. But the primary debonding does not occur at this place because the strength of the shear damage is increased at the local area of the elbow part in the concrete, displaying an apparent reinforced effect at the end of the fiber.展开更多
基金supported by the National Basic Research Program (973 Program) of China (2011CB606105)
文摘This paper studies the interface curing stresses between polymethyl methacrylate (PMMA) and composite by means of digital speckle correlation method (DSCM).A new method by combining DSCM with the marker points is developed to measure the interface curing stresses,and the measurement principle is introduced.The interface curing stresses between PMMA and composite with different curing bonding conditions are measured and analyzed,this indicates that the residual stress for furnace heating and furnace cooling is the smallest.Finally,the measurement error is discussed by means of finite element method,the influences of glass microsphere between adhesive and PMMA can be ignored.
基金Project (No. 200442) supported by the Electronics DevelopmentFoundation for the Key Industrialization Project of the Ministry of0Information Industry, China
文摘Conditional access system (CAS) is a key technical component in digital TV broadcasting through which TV op-erators manage the appropriate rights of different subscribers in order to protect their commercial benefits. The normal digital TV receiver can only receive and decode the pay TV programs scrambled by one specific CAS. In this paper, the authors proposed a smartcard conditional access interface (SCAI) scheme in order to make the digital TV receiver be a common receiving platform independent of any specific CAS employed at the broadcasting head-end. As a result, it only needs to include a common condi-tional access software package (CCAP) without any requirement of hardware modification in the receiver. Comparison between the two mentioned DVB-CI-based schemes showed that the cost of such kind receiver is greatly reduced. The main design points of the proposed scheme and its reference implementation’s architecture are presented in this paper. This scheme is also one of the candidate national standards for Chinese digital TV broadcasting industry.
基金supported by the National Natural Science Foundation of China under Grant No. 60736029 and 30525030UESTC Youth Foundation under Grant No. L08010901JX0772 for support.
文摘In this paper, a new control system based on forearm electromyogram （EMG） is proposed for computer peripheral control and artificial prosthesis control. This control system intends to realize the commands of six pre-defined hand poses： up, down, left, right, yes, and no. In order to research the possibility of using a unified amplifier for both electroencephalogram （EEG） and EMG, the surface forearm EMG data is acquired by a 4-channel EEG measurement system. The Bayesian classifier is used to classify the power spectral density （PSD） of the signal. The experiment result verifies that this control system can supply a high command recognition rate （average 48%） even the EMG data is collected with an EEG system just with single electrode measurement.
文摘Bio-sensor arrays for multi-channel recording have been developed recently and signal processing platforms for those signals have been studied actively.But it’s thereal situation which these technologies are generally developed and studied respectively.So the interface design between recording array and signal processing platform is also an important issue to make bio-sensor signal processing system.In this paper,we proposed interface which has unique protocols to control sensor array and operate platform.There are two types of protocols in the interface.One is between sensor array and MCU in platform and the other is between MCU and board for wireless communication.Basically,each protocol has two kinds of modes(single,frame)and it can be extended if needed.
基金the National High Technology Research and Development Program (863) of China(No. 2006AA02A137)
文摘In recent years, computer assisted surgery （CAS） systems become more and more common in clinical practices, but few specific design criteria have been proposed for human-computer interface （HCI） in GAS systems. This paper tried to give universal criteria of HCI design for CAS systems through introduction of demonstration application, which is total knee replacement （TKR） with a nonimage-based navigation system. A typical computer assisted process can be divided into four phases： the preoperative planning phase, the intraoperative registration phase, the intraoperative navigation phase and finally the postoperative assessment phase. The interface design for four steps is described respectively in the demonstration application. These criteria this paper summarized can be useful to software developers to achieve reliable and effective interfaces for new CAS systems more easily.
文摘In a crumbling tech hub near the marginal coastline,young Angolan developers,despite the challenges of unreliable Internet and dependence on foreign APIs(application programming interfaces),are tapping on donated laptops,debugging health apps that alert rural clinics of disease outbreaks.Their resilience and determination in the face of such obstacles are not just a source of innovation,but also of inspiration and hope.
基金The National Natural Science Foundation of China(No.51875332)the Capacity Building Projects of Some Local Universities of Shanghai Science and Technology Commission(No.18040501600).
文摘To improve the human-physical-virtual coordination and integration of the digital twin workshop,3D visual monitoring and human-computer interaction of the digital twin workshop was studied.First,a novel 6D model of the 3D visualization interactive system for digital twin workshops is proposed.As the traditional 5D digital twin model ignores the importance of human-computer interaction,a new dimension of the user terminal was added.A hierarchical real-time data-driven mapping model for the workshop production process is then proposed.Moreover,a real-time data acquisition method for the industrial Internet of things is proposed based on OPC UA(object linking and embedding for process control unified architecture).Based on the 6D model of the system,the process of creating a 3D visualization virtual environment based on virtual reality is introduced,in addition to a data-driven process based on the data management cloud platform.Finally,the 6D model of the system was confirmed using the blade rotor test workshop as the object,and a 3D visualization interactive system is developed.The results show that the system is more transparent,real-time,data-driven and more efficient,as well as promotes the coordination and integration of human-physical-virtual,which has practical significance for developing digital twin workshops.
文摘In the last two decades, tangible user interfaces （TUIs） have emerged as a new interface type that interlinks the digital and physical worlds. TUIs show a potential to enhance the way in which people interact with digital information. First, this paper exam- ines the existing body of work on tangible user interfaces and discusses their application domains, especially information visualiza- tion. Then it provides a definition of intuitive use and reviews formerly separated ideas on physicality. As interaction has an impact on the overall product experience, we also discuss whether intuitive use influences the users＇ aesthetic judgements of such products.
文摘We are involved in an embarrassing situation that the limited capability of automated feature extraction in digital photogrammetric systems cannot satisfy the increasing needs for rapid acquisition of semantic information for applications. Facing this challenge, a new tactic, Human-Computer Collaborative (HCC) tactic, and a corresponding new method, Operator-Object Directed (OOD) method, are proposed for the design of a system for feature extraction from large scale aerial images. We hold that in almost all technical complex systems, full automation will be neither technically feasible nor socially acceptable. The system should be designed to optimize through the cooperative operation with two agents in the system: the hurtan and the computer.
基金supported by the National Natural Science Foundation of China(No.22075115)Natural Science Foundation of Jiangsu Province(No.BK20211352)+2 种基金Joint Funds of the National Natural Science Foundation of China(No.U2141201)Natural Science Foundation(No.22KJA430005)of Jiangsu Education Committee of ChinaPostgraduate Research and Practice Innovation Program of Jiangsu Normal University(No.2021XKT0296).
文摘Zinc ion batteries are considered as potential energy storage devices due to their advantages of low-cost,high-safety,and high theoretical capacity.However,dendrite growth and chemical corrosion occurring on Zn anode limit their commercialization.These problems can be tackled through the optimization of the electrolyte.However,the screening of electrolyte additives using normal electrochemical methods is time-consuming and labor-intensive.Herein,a fast and simple method based on the digital holography is developed.It can realize the in situ monitoring of electrode/electrolyte interface and provide direct information concerning ion concentration evolution of the diffusion layer.It is effective and time-saving in estimating the homogeneity of the deposition layer and predicting the tendency of dendrite growth,thus able to value the applicability of electrolyte additives.The feasibility of this method is further validated by the forecast and evaluation of thioacetamide additive.Based on systematic characterization,it is proved that the introduction of thioacetamide can not only regulate the interficial ion flux to induce dendrite-free Zn deposition,but also construct adsorption molecule layers to inhibit side reactions of Zn anode.Being easy to operate,capable of in situ observation,and able to endure harsh conditions,digital holography method will be a promising approach for the interfacial investigation of other battery systems.
基金Supported by Key-Area Research and Development Program of Guangdong Province (2019B010149001)the National NaturalScience Foundation of China (61960206007)the 111 Project (B18005)
文摘A brain-computer interface (BCI) facilitates bypassing the peripheral nervous system and directly communicating with surrounding devices. Navigation technology using BCI has developed-from exploring the prototype paradigm in the virtual environment (VE) to accurately completing the locomotion intention of the operator in the form of a powered wheelchair or mobile robot in a real environment. This paper summarizes BCI navigation applications that have been used in both real and VEs in the past 20 years. Horizontal comparisons were conducted between various paradigms applied to BCI and their unique signal-processing methods. Owing to the shift in the control mode from synchronous to asynchronous, the development trend of navigation applications in the VE was also reviewed. The contrast between high level commands and low-level commands is introduced as the main line to review the two major applications of BCI navigation in real environments: mobile robots and unmanned aerial vehicles (UAVs). Finally, applications of BCI navigation to scenarios outside the laboratory;research challenges, including human factors in navigation application interaction design;and the feasibility of hybrid BCI for BCI navigation are discussed in detail.
文摘This paper investigates the reproduction of Chinese painting in the digital age. In particular, how does a website asan interface influence viewers’ response to a Chinese handscroll? The paper begins with a critical description of aweb interface of Freer Gallery of Art and Arthur M. Sackler Gallery, followed by an analysis of the originalpainting. Fishermen on an Autumn River, that the interface digitizes and displays. The last section points out theinfluence of digitization on the relationship between viewers and digital heritage.
基金Supported by the‘Automotive Glazing Application in Intelligent Cockpit Human-Machine Interface’project(SKHX2021049)a collaboration between the Saint-Go Bain Research and the Beijing Normal University。
文摘Background With an increasing number of vehicles becoming autonomous,intelligent,and connected,paying attention to the future usage of car human-machine interface with these vehicles should become more relevant.Several studies have addressed car HMI but were less attentive to designing and implementing interactive glazing for every day(autonomous)driving contexts.Methods Reflecting on the literature,we describe an engineering psychology practice and the design of six novel future user scenarios,which envision the application of a specific set of augmented reality(AR)support user interactions.Additionally,we conduct evaluations on specific scenarios and experiential prototypes,which reveal that these AR scenarios aid the target user groups in experiencing a new type of interaction.The overall evaluation is positive with valuable assessment results and suggestions.Conclusions This study can interest applied psychology educators who aspire to teach how AR can be operationalized in a human-centered design process to students with minimal pre-existing expertise or minimal scientific knowledge in engineering psychology.
文摘To simulate the satellite launch mission under a general platform which could be used in a full-digital mode as well as in a semi-physical way, is an important way to certify the mission design performance as well as technical feasibilities, and it relates to complex system simulation methods such as multi-disciplinary coupling, multi-language modeling as well as interactive simulation and virtual simulation technologies. This paper introduces the design of a digital simulation platform for satellite launch mission verification.The platform has the advantages of high generality and extensibility, being easy to build up. The Functional Mockup Interface(FMI) Standard is adopted to achieve integration of multi-source models. A WebGL based 3D visual simulation tool is also adopted to implement the virtual display system which could display the rocket launch process and rocket-satellite separation with high fidelity 3D virtual scenes. A configuration tool was developed to map the 3D objects in the visual scene with simulation physical variables for complex rocket flight control mechanisms, which greatly improves the platform's generality and extensibility. Finally the real-time performance had been tested and the YL-1 launch mission was adopted to demonstrate the functions of the platform.The platform will be used to construct a digital twin system for satellite launch missions in the future.
文摘Under the tide of information,UI design has become the core lever for measuring the quality of digital product experience.As various applications permeate daily life,the quality of interfaces has been in-creasingly magnified.Researchers at home and abroad have devoted their efforts to this,distilling multiple sets of experience paradigms and operational guidelines.Regrettably,the mainstream thinking is still trapped in a two-dimensionalflat framework.When interaction technologies are advancing rapidly and functional in-formationflows are surging in a multi-dimensional and three-dimensional manner,the old logic can no longer fulfill the demand for a user-centered quality experience.First,an emotional indicator framework is established through human-computer engineering.In the weight setting part,the grey correlation is incorporated into the group analytic hierarchy process,and the modified analytic hierarchy process(AHP)is used to calculate the comprehensive weights,thereby weakening the subjectiveflaws of the traditional AHP.Then,in response to the ambiguity of the evaluation,the intuitionistic fuzzy set is integrated with the TOPSIS(technique for order preference by similarity to an ideal solution)ideal similarity ranking method to construct a new comprehensive evaluation model.This study verifies the applicability of human factors engineering in the emotional design of digital interfaces,providing a quantitative path and practical guidelines for the paradigm shift from“usability”to“empathy”.
基金support by the National Basic Research Program of China(Grant Nos. 2010CB631005 and 2011CB606105)the National Natural Science Foundation of China(Grant Nos. 10625209,10732080 and 90916010)+2 种基金China Postdoctoral Science Foundation(Grant No. 20090460335)Specialized Research Fund for the Doctoral Program of Higher Education(Grant No. 20090002110048)the opening funds from the State Key Laboratory of Explosion Science and Technology(Grant No. KFJJ10-18Y)
文摘The shear modulus of the adhesive layer and the failure mode of adhesive structure on single lap joint specimens under tensile tests are investigated in this paper.The aluminum-aluminum adherends are bonded by two different adhesives:polydimethylsiloxane (PDMS) and epoxy.The full deformation fields are measured using the digital image correlation (DIC) method with the images on the middle part of the adhesive layer recorded by a high resolution microscope.Then,the shear modulus values of the two adhesives are calculated with a simple pure shear strain model.A numerical model is proposed to simulate the single lap joint structure under tensile load in comparison with the experimental results.The results show that this method can successfully estimate the shear modulus of the adhesive layer.The failure behavior of epoxy adhesive/adherend interface is also analyzed and discussed.
基金the National Natural Science Foundation of China(Nos.10972097,11062007)Specialized Research Fund for the Doctoral Programof Higher Education of China(No.20101514120005)the Inner Mongolia Natural Science Foundation of China(No.2010MS0703)
文摘The strain distributions near the interface when the elbow steel fiber is pulled out from the half-mould concrete matrix are directly measured using a combined method of single fiber pull-out test and digital image correlation. Meanwhile, the real-time processes of the bonding, debonding and sliding at the interface are observed. The micro-mechanism of the strain localization in the failure process of interface when debonding occurs and the strengthening mechanism at the imbedded fiber are discussed. The experimental results show that the meso-scale strain localization gives rise to the localization of shear damage near the fiber interface. This strain localization characterized by the debonding process near the interface occurs, develops and moves gradually at an apparently regular interval. At the elbow part of the imbedded fiber, the peak value of the shearing stress occurs. But the primary debonding does not occur at this place because the strength of the shear damage is increased at the local area of the elbow part in the concrete, displaying an apparent reinforced effect at the end of the fiber.
