A digital predistorted class-F power amplifier （PA） using Cree GaN HEMT CGH40010 operating at 2. 12 GHz is presented to obtain high efficiency and excellent linearity for wideband code-division multiple access （ WC...A digital predistorted class-F power amplifier （PA） using Cree GaN HEMT CGH40010 operating at 2. 12 GHz is presented to obtain high efficiency and excellent linearity for wideband code-division multiple access （ WCDMA ） applications. Measurement results with the continuous wave （CW） signals indicate that the designed class-F PA achieves a peak power-added efficiency （PAE） of 75. 2% with an output power of 39.4 dBm. The adjacent channel power ratio （ACPR） of the designed PA after digital predistortion （DPD） decreases from -28. 3 and -27. 5 dBc to -51.9 and -54. 0 dBc, respectively, for a 4-carrier 20 MHz WCDMA signal with 7. 1 dB peak to average power ratio （PAPR）. The drain efficiency （DE） of the PA is 37. 8% at an average output power of 33. 3 dBm. The designed power amplifier can be aoolied in the WCDMA system.展开更多
To compensate for nonlinear distortion introduced by RF power amplifiers （PAs） with memory effects, two correlated models, namely an extended memory polynomial （EMP） model and a memory lookup table （LUT） model, ...To compensate for nonlinear distortion introduced by RF power amplifiers （PAs） with memory effects, two correlated models, namely an extended memory polynomial （EMP） model and a memory lookup table （LUT） model, are proposed for predistorter design. Two adaptive digital predistortion （ADPD） schemes with indirect learning architecture are presented. One adopts the EMP model and the recursive least square （RLS） algorithm, and the other utilizes the memory LUT model and the least mean square （LMS） algorithm. Simulation results demonstrate that the EMP-based ADPD yields the best linearization performance in terms of suppressing spectral regrowth. It is also shown that the ADPD based on memory LUT makes optimum tradeoff between performance and computational complexity.展开更多
A robust digital predistortion(DPD)technique utilizing negative feedback iteration is introduced for linearizing power amplifiers(PAs)in long term evolution(LTE)/5G systems.Different from the conventional direct learn...A robust digital predistortion(DPD)technique utilizing negative feedback iteration is introduced for linearizing power amplifiers(PAs)in long term evolution(LTE)/5G systems.Different from the conventional direct learning and indirect learning structure,the proposed DPD suggests a two-step method to identify the predistortion.Firstly,a negative feedback based iteration is used to estimate the optimal DPD signal.Then the corresponding DPD parameters are extracted by forward modeling with the input signal and optimal DPD signal.The iteration can be applied to both single-band and dual-band PAs,which will achieve superior linear performance than the conventional direct learning DPD while having a relatively low computational complexity.The measurement is carried out on a broadband Doherty PA(DPA)with a 200 MHz bandwidth LTE signal at 2.1 GHz,and on a 5G DPA with two 10 MHz LTE signals at 3.4/3.6 GHz for validation in dual-band scenarios.展开更多
The DVB-T (Digital Video Broadcasting—Terrestrial) standard is being deployed in many parts of the world for digital broadcasting services, providing a variety of features extending the capabilities of the older anal...The DVB-T (Digital Video Broadcasting—Terrestrial) standard is being deployed in many parts of the world for digital broadcasting services, providing a variety of features extending the capabilities of the older analog ones. In this paper, a two-stage low noise amplifier (LNA) is designed for use with the DVB-T standard. The design is employed based on microstrip. The microwave design meets all the specifications required, achieving input and output return loss below ?10 dB, high gain of 35 dB and high linearity. Low noise figure of 1.3 dB is achieved with the use of pHEMT transistor technology.展开更多
A method of implementing high cost-effective and highly integrated digital lock-in amplifier with microcontroller is discussed. And the digital lock-in amplifier is more suitable for meastwing lowfrequency weak signal...A method of implementing high cost-effective and highly integrated digital lock-in amplifier with microcontroller is discussed. And the digital lock-in amplifier is more suitable for meastwing lowfrequency weak signal. Digital signal sequence is obtained through sampling signal measured over an integer number of signal periods, but digital reference sequence is acquired through mathematical operation, then digital phase sensitive detection can be implemented by calculating the cross-correlation function of digital signal sequence and digital reference sequence. In addition, the frequency response and phase character of the digital lock-in amplifier is analyzed. Finally, the designed digital lock-in amplifier is achieved. Expermental results show that the digital lock-in amplifier can be used for measuring weak signal with low ignal-to-noise ratio.展开更多
Lately, it is required that the bandwidth of PWM （pulse width modulation） power amplifier is extended. For example, it is in application of the testing power supply of a low frequency immunity examination, or a clas...Lately, it is required that the bandwidth of PWM （pulse width modulation） power amplifier is extended. For example, it is in application of the testing power supply of a low frequency immunity examination, or a class-D amplifier. In this paper, the authors show that the bandwidth of PWM power amplifier can be controller. This controller is implemented on a DSP （digital can be made wider with this controller. extended by using an approximate 2DOF （2-degree-of-freedom） digital signal processor）. It is demonstrated from experiments that the bandwidth展开更多
In the novel prototype of micro-gyroscope structure,the new configured capacitance sensing scheme for the micro gyroscope was analyzed and the virtual instrument based detection scheme was implemented.The digital lock...In the novel prototype of micro-gyroscope structure,the new configured capacitance sensing scheme for the micro gyroscope was analyzed and the virtual instrument based detection scheme was implemented.The digital lock-in amplifier was employed in the capacitance detection to restrain the noise interference.The capacitance analysis shows that 1 fF capacitance variation corresponds to 0.1 degree of the turn angle.The differential capacitance bridge and the charge integral amplifier were used as the front signal input interface.In the implementation of digital lock-in amplifier,a new routine which warranted the exactly matching of the reference phase to signal phase was proposed.The result of the experiment shows that digital lock-in amplifier can greatly eliminate the noise in the output signal.The non linearity of the turn angle output is 2.3% and the minimum resolution of turn angle is 0.04 degrees.The application of the software demodulation in the signal detection of micro-electro-mechanical-system(MEMS)device is a new attempt,and it shows the prospective for a high-performance application.展开更多
A broadband amplifier with transadmittance and transimpedance stages is designed and two types of improved AGC amplifiers are developed on the base of theory study. Making use of the basic amplifier cells, a main ampl...A broadband amplifier with transadmittance and transimpedance stages is designed and two types of improved AGC amplifiers are developed on the base of theory study. Making use of the basic amplifier cells, a main amplifier IC for optical-fiber receivers is deliberated. By computer simulating the performances of the designed main amplifier meet the necessity of high gain and wide dynamic range . They are maximum voltage gain of 42 dB, the bandwidth of 730 MHz,the input signal( V p-p )range from 5 mV to 1 V,the output amplitude about 1 V, the dynamic range of 46 dB. The designed circuit containing no inductance and large capacitance will be convenient for realizing integration. A monolithic integrated design of 622 Mb/s main amplifier is completed.展开更多
At present what are the key points focused in the research of loop-delay estimation for the digital predistorter in the radio frequency （RF） power amplifier system is reducing its complexity of engineering realizati...At present what are the key points focused in the research of loop-delay estimation for the digital predistorter in the radio frequency （RF） power amplifier system is reducing its complexity of engineering realization and improving anti-jamming ability and computational speed. Besides, opening up its application scope should be contained. For these targets, a novel method including integer loop delay estimation and fractional part is proposed. The integer part applies amplitude-difference summation function and the fractional one adopts the method of finite impulse response （FIR） linear interpolation. The algorithm finds wide applications. What is more, strong anti-jamming ability and low complexity are also its merits. Simulation results support the above opinion. Digital predistortion （DPD） system based on this algorithm achieves good performance.展开更多
We present herein an introduction to the Beijing network of digital geomagnetic pulsation observatories, and describe its essential features, and important roles in earthquake prediction studies and other geomagnetic ...We present herein an introduction to the Beijing network of digital geomagnetic pulsation observatories, and describe its essential features, and important roles in earthquake prediction studies and other geomagnetic investigations. The network provides digitalized data of geomagnetic events, such as magnetic storms, magnetic disturbances, geomagnetic daily variations, and geomagnetic pulsations. The digitalized data, convenient for processing and analysis, contain very rich information because of high accuracy and wide dynamic range of the instruments.展开更多
We propose a joint look-up-table(LUT)-based nonlinear predistortion and digital resolution enhancement scheme to achieve high-speed and low-cost optical interconnects using low-resolution digital-to-analog converters(...We propose a joint look-up-table(LUT)-based nonlinear predistortion and digital resolution enhancement scheme to achieve high-speed and low-cost optical interconnects using low-resolution digital-to-analog converters(DACs).The LUT-based predistortion is employed to mitigate the patterndependent effect(PDE)of a semiconductor optical amplifier(SOA),while the digital resolution enhancer(DRE)is utilized to shape the quantization noise,lowering the requirement for the resolution of DAC.We experimentally demonstrate O-band intensity modulation and direct detection(IM/DD)transmission of 124-GBd 4∕6-level pulse-amplitude modulation ePAMT-4∕6 and 112-GBd PAM-8 signals over a 2-km standard single-mode fiber(SSMF)with 3∕3.5∕4-bit DACs.In the case of 40-km SSMF transmission with an SOAbased preamplifier,124-GBd on-off-keying(OOK)/PAM-3/PAM-4 signals are successfully transmitted with 1.5∕2∕3-bit DACs.To the best of our knowledge,we have achieved the highest net data rates of 235.3-Gb∕s PAM-4,289.7-Gb∕s PAM-6,and 294.7 Gb∕s PAM-8 signals over 2-km SSMF,as well as 117.6-Gb∕s OOK,173.8-Gb∕s PAM-3,and−231.8 Gb∕s PAM-4 signals over 40-km SSMF,employing low-resolution DACs.The experimental results reveal that the joint LUT-based predistortion and DRE effectively mitigate the PDE and improve the signal-to-quantization noise ratio by shaping the noise.The proposed scheme can provide a powerful solution for low-cost IM/DD optical interconnects beyond 200 Gb∕s.展开更多
Most satellite digital radio （SDR） systems use orthogonal frequency-division multiplexing （OFDM） transmission, which means that variable envelope signals are distorted by the RF power amplifier （PA）. It is custo...Most satellite digital radio （SDR） systems use orthogonal frequency-division multiplexing （OFDM） transmission, which means that variable envelope signals are distorted by the RF power amplifier （PA）. It is customary to back off the input power to the PA to avoid the PA nonlinear region of operation. In this way, linearity can be achieved at the cost of power efficiency. Another attractive option is to use a linearizer, which compensates for the nonlinear effects of the PA. In this paper, an OFDM transmitter conforming to European Telecommunications Standard Institute SDR Technical Specifications 2007-2008 was designed and implemented on a low-cost field-programmable gate array （FPGA） platform. A weakly nonlinear PA, operating in the L-band SDR frequency, was used for signal transmission. An adaptive linearizer was designed and implemented on the same FPGA device using digital predistortion to correct the undesired effects of the PA on the transmitted signal. Test results show that spectral distortion can be suppressed between 6-9 dB using the designed linearizer when the PA is driven close to its saturation region.展开更多
In order to provide a novel and more effective alternative to the commonly used relay protection testing device that outputs only the sinusoidal testing signals, the concept of fault waveform regenerator is proposed i...In order to provide a novel and more effective alternative to the commonly used relay protection testing device that outputs only the sinusoidal testing signals, the concept of fault waveform regenerator is proposed in this paper, together with its hardware structure and software flow chart. Fault waveform regenerator mainly depends on its power amplifiers (PAs) to regenerate the fault waveforms recorded by digital fault recorder (DFR). To counteract the PA’s inherent nonlinear distortions, a digital closed-loop modification technique that is different from the predistortion technique is conceived. And the experimental results verify the effectiveness of the fault waveform regenerator based on the digital closed-loop modification technique.展开更多
In this paper, the synchronous concurrent dual-band RF signal is used to drive the RF Power Amplifier (PA). The nonlinear characterization of a concurrent dual-band RF PA is discussed while two band signals in the dua...In this paper, the synchronous concurrent dual-band RF signal is used to drive the RF Power Amplifier (PA). The nonlinear characterization of a concurrent dual-band RF PA is discussed while two band signals in the dual-band are modulated by CDMA2000 and WCDMA signals. When the two band signals in the dual-band of the PA are modulated with the same signals, it is found that the nonlinearity of the PA can be expressed by any of the two corresponding baseband data. On the other hand, when the two band signals in the dual-band of the PA are modulated with two different signals, the PA nonlinearity cannot be characterized by any of the two corresponding baseband data. In this case, its nonlinearity has to be denoted by a composite signals consisting of the two baseband signals. Consequently, the requirements for the speed of the A/D converter can be largely reduced. The experimental results with CDMA2000 and WCDMA signals demonstrate the speed of the A/D converter required is only 30 M Sample Per Second (SaPS), but it will be at least 70 M SaPS for the conventional method.展开更多
Nonlinear distortion is one of key limiting factors in radio over fiber (RoF) transmission systems. To suppress the nonlinear distortion, digital pre-distortion (DPD) has been investigated considerably. However, for m...Nonlinear distortion is one of key limiting factors in radio over fiber (RoF) transmission systems. To suppress the nonlinear distortion, digital pre-distortion (DPD) has been investigated considerably. However, for multi-band signals, DPD becomes very complex, which limits the applications. To reduce the complexity, many simplified DPDs have been proposed. In this work, a new multidimensional DPD is proposed, in which in-band and out-of-band distortion are separated and the out-of-band distortion is evaluated by sum and differences of all input signals instead of all individual input signals, thus complexity is reduced. An up to 6-band 64-QAM orthogonal frequency division multiplexing (OFDM) signal with each bandwidth of 200 MHz in simulations and a 5-band 20 MHz 64-QAM OFDM signal in experiments are used to validate the pro-posed DPD. The validation is illustrated in the means of power spectrum, AM/AM and AM/PM distortion, and error vector magnitude (EVM) of the received signal constellations. The average EVM improvement by simulation for 3-band, 4-band, 5-band and 6-band signals is 19.97 dB, 18.65 dB, 16.64 dB and 15.44 dB, respectively. The average EVM improvement by experiments for 5-band signals is 8.1 dB. Considering the ten times of bandwidth difference, experiments and simulation agree well.展开更多
In Electronic Warfare （EW） receivers, the desired Dynamic Range （DR） often far exceeds the dynamic range attainable with available Analog-to-Digital Converter （ADC） technology. ADC is the key bottleneck in achie...In Electronic Warfare （EW） receivers, the desired Dynamic Range （DR） often far exceeds the dynamic range attainable with available Analog-to-Digital Converter （ADC） technology. ADC is the key bottleneck in achieving the needed dynamic range. In this paper, an approach for improving the effective DR by utiliTing multiple amplifiers is presented. The amplifiers, arranged in parallel channels with different gains, can increase the dynamic range greatly.展开更多
A digital input class-D audio amplifier with a sixth-order pulse-width modulation （PWM） modulator is presented. This modulator moves the PWM generator into the closed sigma-delta modulator loop. The noise and distor...A digital input class-D audio amplifier with a sixth-order pulse-width modulation （PWM） modulator is presented. This modulator moves the PWM generator into the closed sigma-delta modulator loop. The noise and distortions generated at the PWM generator module are suppressed by the high gain of the forward loop of the sigma-delta modulator. Therefore, at the output of the modulator, a very clean PWM signal is acquired for driving the power stage of the class-D amplifier. A sixth-order modulator is designed to balance the performance and the system clock speed. Fabricated in standard 0.18 μm CMOS technology, this class-D amplifier achieves 110 dB dynamic range, 100 dB signal-to-noise rate, and 0.0056% total harmonic distortion plus noise.展开更多
One challenge of the implementation of fully-integrated RF power amplifiers into a deep submicro digital CMOS process is that no capacitor is available,especially no high density capacitor.To address this problem,a tw...One challenge of the implementation of fully-integrated RF power amplifiers into a deep submicro digital CMOS process is that no capacitor is available,especially no high density capacitor.To address this problem,a two-stage class-AB power amplifier with inter-stage matching realized by an inter-metal coupling capacitor is designed in a 180-nm digital CMOS process.This paper compares three structures of inter-metal coupling capacitors with metal-insulator-metal（MIM） capacitor regarding their capacitor density.Detailed simulations are carried out for the leakage,the voltage dependency,the temperature dependency,and the quality factor between an inter-metal shuffled（IMS） capacitor and an MIM capacitor.Finally,an IMS capacitor is chosen to perform the inter-stage matching.The techniques are validated via the design and implement of a two-stage class-AB RF power amplifier for an UHF RFID application.The PA occupies 370 × 200 μm^2 without pads in the 180-nm digital CMOS process and outputs 21.1 dBm with 40% drain efficiency and 28.1 dB power gain at 915 MHz from a single 3.3 V power supply.展开更多
基金The National Natural Science Foundation of China(No.60702163)the National Science and Technology Major Project(No.2010ZX03007-002-01,2011ZX03004-003)
文摘A digital predistorted class-F power amplifier （PA） using Cree GaN HEMT CGH40010 operating at 2. 12 GHz is presented to obtain high efficiency and excellent linearity for wideband code-division multiple access （ WCDMA ） applications. Measurement results with the continuous wave （CW） signals indicate that the designed class-F PA achieves a peak power-added efficiency （PAE） of 75. 2% with an output power of 39.4 dBm. The adjacent channel power ratio （ACPR） of the designed PA after digital predistortion （DPD） decreases from -28. 3 and -27. 5 dBc to -51.9 and -54. 0 dBc, respectively, for a 4-carrier 20 MHz WCDMA signal with 7. 1 dB peak to average power ratio （PAPR）. The drain efficiency （DE） of the PA is 37. 8% at an average output power of 33. 3 dBm. The designed power amplifier can be aoolied in the WCDMA system.
文摘To compensate for nonlinear distortion introduced by RF power amplifiers （PAs） with memory effects, two correlated models, namely an extended memory polynomial （EMP） model and a memory lookup table （LUT） model, are proposed for predistorter design. Two adaptive digital predistortion （ADPD） schemes with indirect learning architecture are presented. One adopts the EMP model and the recursive least square （RLS） algorithm, and the other utilizes the memory LUT model and the least mean square （LMS） algorithm. Simulation results demonstrate that the EMP-based ADPD yields the best linearization performance in terms of suppressing spectral regrowth. It is also shown that the ADPD based on memory LUT makes optimum tradeoff between performance and computational complexity.
基金National Key R&D Program of China under Grant No.2018YFB1801603 and No.2017YFF0206201National Sci⁃ence and Technology Major Project under Grant 2017ZX03001024,NSFC under Grant No.61801259 and Beijing National Research Center for Infor⁃mation Science and Technology(BNRist).
文摘A robust digital predistortion(DPD)technique utilizing negative feedback iteration is introduced for linearizing power amplifiers(PAs)in long term evolution(LTE)/5G systems.Different from the conventional direct learning and indirect learning structure,the proposed DPD suggests a two-step method to identify the predistortion.Firstly,a negative feedback based iteration is used to estimate the optimal DPD signal.Then the corresponding DPD parameters are extracted by forward modeling with the input signal and optimal DPD signal.The iteration can be applied to both single-band and dual-band PAs,which will achieve superior linear performance than the conventional direct learning DPD while having a relatively low computational complexity.The measurement is carried out on a broadband Doherty PA(DPA)with a 200 MHz bandwidth LTE signal at 2.1 GHz,and on a 5G DPA with two 10 MHz LTE signals at 3.4/3.6 GHz for validation in dual-band scenarios.
文摘The DVB-T (Digital Video Broadcasting—Terrestrial) standard is being deployed in many parts of the world for digital broadcasting services, providing a variety of features extending the capabilities of the older analog ones. In this paper, a two-stage low noise amplifier (LNA) is designed for use with the DVB-T standard. The design is employed based on microstrip. The microwave design meets all the specifications required, achieving input and output return loss below ?10 dB, high gain of 35 dB and high linearity. Low noise figure of 1.3 dB is achieved with the use of pHEMT transistor technology.
文摘A method of implementing high cost-effective and highly integrated digital lock-in amplifier with microcontroller is discussed. And the digital lock-in amplifier is more suitable for meastwing lowfrequency weak signal. Digital signal sequence is obtained through sampling signal measured over an integer number of signal periods, but digital reference sequence is acquired through mathematical operation, then digital phase sensitive detection can be implemented by calculating the cross-correlation function of digital signal sequence and digital reference sequence. In addition, the frequency response and phase character of the digital lock-in amplifier is analyzed. Finally, the designed digital lock-in amplifier is achieved. Expermental results show that the digital lock-in amplifier can be used for measuring weak signal with low ignal-to-noise ratio.
文摘Lately, it is required that the bandwidth of PWM （pulse width modulation） power amplifier is extended. For example, it is in application of the testing power supply of a low frequency immunity examination, or a class-D amplifier. In this paper, the authors show that the bandwidth of PWM power amplifier can be controller. This controller is implemented on a DSP （digital can be made wider with this controller. extended by using an approximate 2DOF （2-degree-of-freedom） digital signal processor）. It is demonstrated from experiments that the bandwidth
基金The National Natural Science Foundation ofChina(No.60402003)The National High Technology Research and Development Pro-gram of China(863Program)(No.2002AA745120)
文摘In the novel prototype of micro-gyroscope structure,the new configured capacitance sensing scheme for the micro gyroscope was analyzed and the virtual instrument based detection scheme was implemented.The digital lock-in amplifier was employed in the capacitance detection to restrain the noise interference.The capacitance analysis shows that 1 fF capacitance variation corresponds to 0.1 degree of the turn angle.The differential capacitance bridge and the charge integral amplifier were used as the front signal input interface.In the implementation of digital lock-in amplifier,a new routine which warranted the exactly matching of the reference phase to signal phase was proposed.The result of the experiment shows that digital lock-in amplifier can greatly eliminate the noise in the output signal.The non linearity of the turn angle output is 2.3% and the minimum resolution of turn angle is 0.04 degrees.The application of the software demodulation in the signal detection of micro-electro-mechanical-system(MEMS)device is a new attempt,and it shows the prospective for a high-performance application.
文摘A broadband amplifier with transadmittance and transimpedance stages is designed and two types of improved AGC amplifiers are developed on the base of theory study. Making use of the basic amplifier cells, a main amplifier IC for optical-fiber receivers is deliberated. By computer simulating the performances of the designed main amplifier meet the necessity of high gain and wide dynamic range . They are maximum voltage gain of 42 dB, the bandwidth of 730 MHz,the input signal( V p-p )range from 5 mV to 1 V,the output amplitude about 1 V, the dynamic range of 46 dB. The designed circuit containing no inductance and large capacitance will be convenient for realizing integration. A monolithic integrated design of 622 Mb/s main amplifier is completed.
基金supported by the Circuit and System Foremost Discipline of Zhejiang Province under Grant No. ZZ050103-11
文摘At present what are the key points focused in the research of loop-delay estimation for the digital predistorter in the radio frequency （RF） power amplifier system is reducing its complexity of engineering realization and improving anti-jamming ability and computational speed. Besides, opening up its application scope should be contained. For these targets, a novel method including integer loop delay estimation and fractional part is proposed. The integer part applies amplitude-difference summation function and the fractional one adopts the method of finite impulse response （FIR） linear interpolation. The algorithm finds wide applications. What is more, strong anti-jamming ability and low complexity are also its merits. Simulation results support the above opinion. Digital predistortion （DPD） system based on this algorithm achieves good performance.
文摘We present herein an introduction to the Beijing network of digital geomagnetic pulsation observatories, and describe its essential features, and important roles in earthquake prediction studies and other geomagnetic investigations. The network provides digitalized data of geomagnetic events, such as magnetic storms, magnetic disturbances, geomagnetic daily variations, and geomagnetic pulsations. The digitalized data, convenient for processing and analysis, contain very rich information because of high accuracy and wide dynamic range of the instruments.
基金supported by the National Key R&D Program of China(Grant No.2020YFB1806400)the China Scholarship Council(Grant No.202306230183)the National Natural Science Foundation of China(Grant Nos.62271305 and 62001287).
文摘We propose a joint look-up-table(LUT)-based nonlinear predistortion and digital resolution enhancement scheme to achieve high-speed and low-cost optical interconnects using low-resolution digital-to-analog converters(DACs).The LUT-based predistortion is employed to mitigate the patterndependent effect(PDE)of a semiconductor optical amplifier(SOA),while the digital resolution enhancer(DRE)is utilized to shape the quantization noise,lowering the requirement for the resolution of DAC.We experimentally demonstrate O-band intensity modulation and direct detection(IM/DD)transmission of 124-GBd 4∕6-level pulse-amplitude modulation ePAMT-4∕6 and 112-GBd PAM-8 signals over a 2-km standard single-mode fiber(SSMF)with 3∕3.5∕4-bit DACs.In the case of 40-km SSMF transmission with an SOAbased preamplifier,124-GBd on-off-keying(OOK)/PAM-3/PAM-4 signals are successfully transmitted with 1.5∕2∕3-bit DACs.To the best of our knowledge,we have achieved the highest net data rates of 235.3-Gb∕s PAM-4,289.7-Gb∕s PAM-6,and 294.7 Gb∕s PAM-8 signals over 2-km SSMF,as well as 117.6-Gb∕s OOK,173.8-Gb∕s PAM-3,and−231.8 Gb∕s PAM-4 signals over 40-km SSMF,employing low-resolution DACs.The experimental results reveal that the joint LUT-based predistortion and DRE effectively mitigate the PDE and improve the signal-to-quantization noise ratio by shaping the noise.The proposed scheme can provide a powerful solution for low-cost IM/DD optical interconnects beyond 200 Gb∕s.
文摘Most satellite digital radio （SDR） systems use orthogonal frequency-division multiplexing （OFDM） transmission, which means that variable envelope signals are distorted by the RF power amplifier （PA）. It is customary to back off the input power to the PA to avoid the PA nonlinear region of operation. In this way, linearity can be achieved at the cost of power efficiency. Another attractive option is to use a linearizer, which compensates for the nonlinear effects of the PA. In this paper, an OFDM transmitter conforming to European Telecommunications Standard Institute SDR Technical Specifications 2007-2008 was designed and implemented on a low-cost field-programmable gate array （FPGA） platform. A weakly nonlinear PA, operating in the L-band SDR frequency, was used for signal transmission. An adaptive linearizer was designed and implemented on the same FPGA device using digital predistortion to correct the undesired effects of the PA on the transmitted signal. Test results show that spectral distortion can be suppressed between 6-9 dB using the designed linearizer when the PA is driven close to its saturation region.
文摘In order to provide a novel and more effective alternative to the commonly used relay protection testing device that outputs only the sinusoidal testing signals, the concept of fault waveform regenerator is proposed in this paper, together with its hardware structure and software flow chart. Fault waveform regenerator mainly depends on its power amplifiers (PAs) to regenerate the fault waveforms recorded by digital fault recorder (DFR). To counteract the PA’s inherent nonlinear distortions, a digital closed-loop modification technique that is different from the predistortion technique is conceived. And the experimental results verify the effectiveness of the fault waveform regenerator based on the digital closed-loop modification technique.
基金Supported by the National Science and Technology Major Project of China (2010ZX03007-003-04)the National Natural Science Foundation of China (No. 61171040)+4 种基金the Key Project of International Cooperation of the Provincial Science and Technology Major Projects of Zhejiang (2010C14007)the Provincial Natural Science Foundation of Zhejiang (Y1101270)the Natural Science Foundation of Ningbo (2011A610188)Key Project of International Scientific and Technical Cooperation of Yunnan (2009AC010)Excellent Papers Engagement Fund of Ningbo University (PY20100004)
文摘In this paper, the synchronous concurrent dual-band RF signal is used to drive the RF Power Amplifier (PA). The nonlinear characterization of a concurrent dual-band RF PA is discussed while two band signals in the dual-band are modulated by CDMA2000 and WCDMA signals. When the two band signals in the dual-band of the PA are modulated with the same signals, it is found that the nonlinearity of the PA can be expressed by any of the two corresponding baseband data. On the other hand, when the two band signals in the dual-band of the PA are modulated with two different signals, the PA nonlinearity cannot be characterized by any of the two corresponding baseband data. In this case, its nonlinearity has to be denoted by a composite signals consisting of the two baseband signals. Consequently, the requirements for the speed of the A/D converter can be largely reduced. The experimental results with CDMA2000 and WCDMA signals demonstrate the speed of the A/D converter required is only 30 M Sample Per Second (SaPS), but it will be at least 70 M SaPS for the conventional method.
文摘Nonlinear distortion is one of key limiting factors in radio over fiber (RoF) transmission systems. To suppress the nonlinear distortion, digital pre-distortion (DPD) has been investigated considerably. However, for multi-band signals, DPD becomes very complex, which limits the applications. To reduce the complexity, many simplified DPDs have been proposed. In this work, a new multidimensional DPD is proposed, in which in-band and out-of-band distortion are separated and the out-of-band distortion is evaluated by sum and differences of all input signals instead of all individual input signals, thus complexity is reduced. An up to 6-band 64-QAM orthogonal frequency division multiplexing (OFDM) signal with each bandwidth of 200 MHz in simulations and a 5-band 20 MHz 64-QAM OFDM signal in experiments are used to validate the pro-posed DPD. The validation is illustrated in the means of power spectrum, AM/AM and AM/PM distortion, and error vector magnitude (EVM) of the received signal constellations. The average EVM improvement by simulation for 3-band, 4-band, 5-band and 6-band signals is 19.97 dB, 18.65 dB, 16.64 dB and 15.44 dB, respectively. The average EVM improvement by experiments for 5-band signals is 8.1 dB. Considering the ten times of bandwidth difference, experiments and simulation agree well.
文摘In Electronic Warfare （EW） receivers, the desired Dynamic Range （DR） often far exceeds the dynamic range attainable with available Analog-to-Digital Converter （ADC） technology. ADC is the key bottleneck in achieving the needed dynamic range. In this paper, an approach for improving the effective DR by utiliTing multiple amplifiers is presented. The amplifiers, arranged in parallel channels with different gains, can increase the dynamic range greatly.
基金supported by the National High Technology Research and Development Program of China(No.2012AA012301)the National Natural Science Foundation of China(No.61171001)
文摘A digital input class-D audio amplifier with a sixth-order pulse-width modulation （PWM） modulator is presented. This modulator moves the PWM generator into the closed sigma-delta modulator loop. The noise and distortions generated at the PWM generator module are suppressed by the high gain of the forward loop of the sigma-delta modulator. Therefore, at the output of the modulator, a very clean PWM signal is acquired for driving the power stage of the class-D amplifier. A sixth-order modulator is designed to balance the performance and the system clock speed. Fabricated in standard 0.18 μm CMOS technology, this class-D amplifier achieves 110 dB dynamic range, 100 dB signal-to-noise rate, and 0.0056% total harmonic distortion plus noise.
文摘One challenge of the implementation of fully-integrated RF power amplifiers into a deep submicro digital CMOS process is that no capacitor is available,especially no high density capacitor.To address this problem,a two-stage class-AB power amplifier with inter-stage matching realized by an inter-metal coupling capacitor is designed in a 180-nm digital CMOS process.This paper compares three structures of inter-metal coupling capacitors with metal-insulator-metal（MIM） capacitor regarding their capacitor density.Detailed simulations are carried out for the leakage,the voltage dependency,the temperature dependency,and the quality factor between an inter-metal shuffled（IMS） capacitor and an MIM capacitor.Finally,an IMS capacitor is chosen to perform the inter-stage matching.The techniques are validated via the design and implement of a two-stage class-AB RF power amplifier for an UHF RFID application.The PA occupies 370 × 200 μm^2 without pads in the 180-nm digital CMOS process and outputs 21.1 dBm with 40% drain efficiency and 28.1 dB power gain at 915 MHz from a single 3.3 V power supply.
