The thermocline energy storage tank(TEST)serves as a crucial component in thermal energy storage systems,utilizing the working fluid that enters through a diffuser to store and harness energy.However,the conventional ...The thermocline energy storage tank(TEST)serves as a crucial component in thermal energy storage systems,utilizing the working fluid that enters through a diffuser to store and harness energy.However,the conventional double-plate radial diffuser is ill-suited for a single-medium TEST’s full tank storage due to its unidirectional fluid inflow.There has been a notable lack of optimization analysis of diffusers.Two innovative tubular diffuser designs with reduced cross-sectional areas have been introduced:the annular-arranged diffuser(AAD)and the cross-arranged diffuser(CAD).To elucidate the impact of diffuser designs on energy storage efficiency,a 3D transient computational fluid dynamics(CFD)model was established to simulate a thermocline formation under two diffuser types.The model was validated against experimental data.Results showed that the thermocline of AAD was 11.39%thinner than that of a traditional double-plate diffuser.In the process of charging and discharging,the time-varying thermocline and factors influencing thermocline thickness were analyzed.Results indicate that in the mixed dominant region,increased turbulent kinetic energy correlates with reduced thermocline thickness.Notably,the AAD’s stable thermocline was 4.23%and 5.41%thinner than the CAD’s during charging and discharging,respectively,making the AAD preferable for engineering applications.The effects of tube diameter and orifice opening angle on temperature stratification performance were also examined.The findings suggest that an inclined impact jet and large-diameter tubes are more conducive to temperature stratification.Moreover,an orifice diameter optimization method was developed,which can decrease the thermocline by 6.78%.展开更多
The influence of diffuser parameters, including the riser spacing, port number in a riser, injection angle, port arrangement, etc., on the surface initial dilution is experimentally investigated. The relative density ...The influence of diffuser parameters, including the riser spacing, port number in a riser, injection angle, port arrangement, etc., on the surface initial dilution is experimentally investigated. The relative density difference between the effluent and the sea water in the model is the same as that in the prototype, and the effect of the cross current is simulated by an inverse model technique. Based on the result analysis, the arrangement with more ports in a riser and larger riser spacing is suggested to save construction cost. The relationship between the Reynolds number based on the port diameter and velocity, and the surface initial dilution is also explored, and the critical Reynolds number is proposed.展开更多
Multiport diffusers are the effective engineering devices installed at the marine outfall systems for the steady discharge of effluent streams from the modern coastal plants, such as municipal sewage treatment, power ...Multiport diffusers are the effective engineering devices installed at the marine outfall systems for the steady discharge of effluent streams from the modern coastal plants, such as municipal sewage treatment, power generation and seawater desalination. A far field mathematical model using a two-dimensional advection-diffusion equation is presented for continuous discharges of effluent streams from multiple outfalls on a uniformly sloping beach with a current parallel to the shoreline. The analytical solutions are illustrated graphically to replicate and capture the merging process of effluent plumes in shallow coastal waters, and then asymptotic approximation will be made to the maximum shoreline’s concentration to formulate effluent discharge plume dilution from a multiport diffuser.展开更多
Free-space optical information transfer through diffusive media is critical in many applications, such as biomedical devices and optical communication, but remains challenging due to random, unknown perturbations in t...Free-space optical information transfer through diffusive media is critical in many applications, such as biomedical devices and optical communication, but remains challenging due to random, unknown perturbations in the optical path. We demonstrate an optical diffractive decoder with electronic encoding to accurately transfer the optical information of interest, corresponding to, e.g., any arbitrary input object or message, through unknown random phase diffusers along the optical path. This hybrid electronic-optical model, trained using supervised learning, comprises a convolutional neural network-based electronic encoder and successive passive diffractive layers that are jointly optimized. After their joint training using deep learning,our hybrid model can transfer optical information through unknown phase diffusers, demonstrating generalization to new random diffusers never seen before. The resulting electronic-encoder and optical-decoder model was experimentally validated using a 3D-printed diffractive network that axially spans <70λ, whereλ = 0.75 mm is the illumination wavelength in the terahertz spectrum, carrying the desired optical information through random unknown diffusers. The presented framework can be physically scaled to operate at different parts of the electromagnetic spectrum, without retraining its components, and would offer low-power and compact solutions for optical information transfer in free space through unknown random diffusive media.展开更多
As a variable-condition adjustment technology,the adjustable vaned diffusers(AVDs)can expand the working flow range of the compressor in the compressed air energy storage(CAES)system and improve its aerodynamic perfor...As a variable-condition adjustment technology,the adjustable vaned diffusers(AVDs)can expand the working flow range of the compressor in the compressed air energy storage(CAES)system and improve its aerodynamic performance.In order to investigate the regulatory mechanism of AVDs and capture the details of vane loading distribution for the diffuser design optimization,additively manufactured AVDs for testing in a centrifugal compressor closed test facility are designed and implemented.Firstly,the regulation law of AVDs was summarized by numerical analysis and experimental support,and the corresponding vane loading data was extracted for the distribution law.Then,based on the distribution characteristics,3D diffuser models were designed suitably for the adjustable components.Then,the laser selective melting(SLM)technology and die steel material 1.2709 were selected for metal printing according to the actual operating environment.Finally,performance testing and accuracy detection were performed on the finished test pieces,almost all inlet hole’s deviations were within the 0.3 mm tolerance.The research results indicated that additive manufacturing can significantly improve the accessibility of the internal flow channels of the diffuser,and derive the load of the blade on the pressure surface and suction surface in detail,also provide adjustable functions for variable operating conditions.It can not only break through the traditional processing bottleneck of the complicated internal flow channels of AVDs but also improve the design matching degree with adjustable components;simultaneously,it ensures high performance with high precision and effectively shortens the long lead time.展开更多
Imaging through diffusers presents a challenging problem with various digital image reconstruction solutions demonstrated to date using computers.Here,we present a computer-free,all-optical image reconstruction method...Imaging through diffusers presents a challenging problem with various digital image reconstruction solutions demonstrated to date using computers.Here,we present a computer-free,all-optical image reconstruction method to see through random diffusers at the speed of light.Using deep learning,a set of transmissive diffractive surfaces are trained to all-optically reconstruct images of arbitrary objects that are completely covered by unknown,random phase diffusers.After the training stage,which is a one-time effort,the resulting diffractive surfaces are fabricated and form a passive optical network that is physically positioned between the unknown object and the image plane to all-optically reconstruct the object pattern through an unknown,new phase diffuser.We experimentally demonstrated this concept using coherent THz illumination and all-optically reconstructed objects distorted by unknown,random diffusers,never used during training.Unlike digital methods,all-optical diffractive reconstructions do not require power except for the illumination light.This diffractive solution to see through diffusers can be extended to other wavelengths,and might fuel various applications in biomedical imaging,astronomy,atmospheric sciences,oceanography,security,robotics,autonomous vehicles,among many others.展开更多
Cerebral small vessel disease encompasses a group of neurological disorders characterized by injury to small blood vessels,often leading to stroke and dementia.Due to its diverse etiologies and complex pathological me...Cerebral small vessel disease encompasses a group of neurological disorders characterized by injury to small blood vessels,often leading to stroke and dementia.Due to its diverse etiologies and complex pathological mechanisms,preventing and treating cerebral small vessel vasculopathy is challenging.Recent studies have shown that the glymphatic system plays a crucial role in interstitial solute clearance and the maintenance of brain homeostasis.Increasing evidence also suggests that dysfunction in glymphatic clearance is a key factor in the progression of cerebral small vessel disease.This review begins with a comprehensive introduction to the structure,function,and driving factors of the glymphatic system,highlighting its essential role in brain waste clearance.Afterwards,cerebral small vessel disease was reviewed from the perspective of the glymphatic system,after which the mechanisms underlying their correlation were summarized.Glymphatic dysfunction may lead to the accumulation of metabolic waste in the brain,thereby exacerbating the pathological processes associated with cerebral small vessel disease.The review also discussed the direct evidence of glymphatic dysfunction in patients and animal models exhibiting two subtypes of cerebral small vessel disease:arteriolosclerosis-related cerebral small vessel disease and amyloid-related cerebral small vessel disease.Diffusion tensor image analysis along the perivascular space is an important non-invasive tool for assessing the clearance function of the glymphatic system.However,the effectiveness of its parameters needs to be enhanced.Among various nervous system diseases,including cerebral small vessel disease,glymphatic failure may be a common final pathway toward dementia.Overall,this review summarizes prevention and treatment strategies that target glymphatic drainage and will offer valuable insight for developing novel treatments for cerebral small vessel disease.展开更多
In this paper,we are concerned with the stability of traveling wavefronts of a Belousov-Zhabotinsky model with mixed nonlocal and degenerate diffusions.Such a system can be used to study the competition among nonlocal...In this paper,we are concerned with the stability of traveling wavefronts of a Belousov-Zhabotinsky model with mixed nonlocal and degenerate diffusions.Such a system can be used to study the competition among nonlocally diffusive species and degenerately diffusive species.We prove that the traveling wavefronts are exponentially stable,when the initial perturbation around the traveling waves decays exponentially as x→-∞,but in other locations,the initial data can be arbitrarily large.The adopted methods are the weighted energy with the comparison principle and squeezing technique.展开更多
Mesenchymal stromal cell transplantation is an effective and promising approach for treating various systemic and diffuse diseases.However,the biological characteristics of transplanted mesenchymal stromal cells in hu...Mesenchymal stromal cell transplantation is an effective and promising approach for treating various systemic and diffuse diseases.However,the biological characteristics of transplanted mesenchymal stromal cells in humans remain unclear,including cell viability,distribution,migration,and fate.Conventional cell tracing methods cannot be used in the clinic.The use of superparamagnetic iron oxide nanoparticles as contrast agents allows for the observation of transplanted cells using magnetic resonance imaging.In 2016,the National Medical Products Administration of China approved a new superparamagnetic iron oxide nanoparticle,Ruicun,for use as a contrast agent in clinical trials.In the present study,an acute hemi-transection spinal cord injury model was established in beagle dogs.The injury was then treated by transplantation of Ruicun-labeled mesenchymal stromal cells.The results indicated that Ruicunlabeled mesenchymal stromal cells repaired damaged spinal cord fibers and partially restored neurological function in animals with acute spinal cord injury.T2*-weighted imaging revealed low signal areas on both sides of the injured spinal cord.The results of quantitative susceptibility mapping with ultrashort echo time sequences indicated that Ruicun-labeled mesenchymal stromal cells persisted stably within the injured spinal cord for over 4 weeks.These findings suggest that magnetic resonance imaging has the potential to effectively track the migration of Ruicun-labeled mesenchymal stromal cells and assess their ability to repair spinal cord injury.展开更多
Improvement of aerodynamic performance and reduction of interaction tone noise of a centrifugal compressor with vaned diffusers are discussed by experiments and visualization techniques using a colored off-film method...Improvement of aerodynamic performance and reduction of interaction tone noise of a centrifugal compressor with vaned diffusers are discussed by experiments and visualization techniques using a colored off-film method. The focus of the research is concentrated on the leading edge shape of diffuser vanes that are deeply related to the generation mechanism of the interaction tone noise. The compressor-radiated noise can be reduced by more than ten decibels by using modified diffuser vanes which have 3-D tapered shapes on both pressure and suction sur- faces of the leading edge. Furthermore, by adopting the proposed modified diffuser vanes, the secondary flow which is considered to be an obstruction of diffuser pressure recovery can be suppressed, and also the pressure decrease observed in the throat part of the diffuser flow passage is reducible. Thus, the proposed diffuser vanes show a favorable result for both noise and the aerodynamic performance of the centrifugal compressor, and offer a few basic guidelines for the diffuser vane design.展开更多
Centrifugal compressors for the fuel cell vehicles often operate near the surge line compared with the turbocharger compressors.Low solidity and half vaned diffusers are recognized as good ways to improve the stabilit...Centrifugal compressors for the fuel cell vehicles often operate near the surge line compared with the turbocharger compressors.Low solidity and half vaned diffusers are recognized as good ways to improve the stability of the centrifugal compressor.The presented work investigated four diffuser configurations (i.e.,the vaneless diffuser (VLD),full-height low solidity vaned diffuser (LSVD),hub-side half vaned diffuser (HVD) and shroud-side half vaned diffuser (SVD)) through steady-state and unsteady numerical simulations.The results show that the best performance is achieved by the LSVD,HVD and SVD at the design,surge and choke conditions.The flow rate at the surge operating point of the HVD has decreased by 15.53% compared with the LSVD,and 9.21% compared with the VLD.At near surge operating point,a longitudinal suction side passage vortex is formed on the hub of the LSVD and rotates as circumferential stall cells.A hairpin vortex is formed along the leading edge and is dragged by the main flow along the suction side as a local vortex shedding.The mechanism of the stability improvement by half vaned diffusers is that the tip leakage vortex migrates from the clearance side to the vane mounting side and replenishes the low-momentum zone on the mounting side.The best position where the half vaned diffuser should be mounted is based on the impeller outlet flow conditions,namely,the location of the wake region,where the meridional velocity and relative stagnation pressure is low.展开更多
High-pressure ratio and wide operating range are highly required for compressors and blowers. The technical issue of the design is achievement of suppression of flow separation at small flow rate without deteriorating...High-pressure ratio and wide operating range are highly required for compressors and blowers. The technical issue of the design is achievement of suppression of flow separation at small flow rate without deteriorating the efficiency at design flow rate. A numerical simulation is very effective in design procedure, however, cost of the numerical simulation is generally high during the practical design process, and it is difficult to confn＇m the optimal design which is combined with many parameters. A multi-objective optimization technique is the idea that has been proposed for solving the problem in practical design process. In this study, a Low Solidity circular cascade Diffuser （LSD） in a centrifugal blower is successfully designed by means of multi-objective optimization technique. An optimization code with a meta-model assisted evolutionary algorithm is used with a commercial CFD code ANSYS-CFX. The optimization is aiming at improving the static pressure coefficient at design point and at low flow rate condition while constraining the slope of the lift coefficient curve. Moreover, a small tip clearance of the LSD blade was applied in order to activate and to stabilize the secondary flow effect at small flow rate condition. The optimized LSD blade has an extended operating range of 114 % towards smaller flow rate as compared to the baseline design without deteriorating the diffuser pressure recovery at design point. The diffuser pressure rise and operating flow range of the optimized LSD blade are experimentally verified by overall performance test. The detailed flow in the diffuser is also confirmed by means of a Particle Image Velocimeter. Secondary flow is clearly captured by PIV and it spreads to the whole area of LSD blade pitch. It is found that the optimized LSD blade shows good improvement of the blade loading in the whole operating range, while at small flow rate the flow separation on the LSD blade has been successfully suppressed by the secondary flow effect.展开更多
The increasing use of gas turbines in combined cycle power plants together with the high amount of kinetic energy in modem gas turbine exhaust flows focuses attention on the design of gas turbine diffusers as the conn...The increasing use of gas turbines in combined cycle power plants together with the high amount of kinetic energy in modem gas turbine exhaust flows focuses attention on the design of gas turbine diffusers as the connecting part between the Brayton/Joule and the Rankine parts of the combined cycle. A scale model of a typical gas turbine exhaust diffuser is investigated experimentally. The test rig consists of a radial type, variable swirl generator which provides the exhaust flow corresponding to different gas turbine operating conditions. Static pressure measurements are carried out along the outer diffuser walls and along the hub of the annular part and along the centerline of the conical diffuser. Velocity distributions at several axial positions in the annular and conical diffuser have been measured using a Laser Doppler Velocimeter （LDV）. Pressure recovery coefficients and velocity profiles are depicted as a function of diffuser length for several combinations of swirl strength, tip flow and strut geometries. The diffuser without struts achieved a higher pressure recovery than the diffuser with struts at all swirl angle settings. The diffuser with cylindrical struts achieved a higher pressure recovery than the diffuser with profiled struts at all swirl angle seO.ings. Inlet flows with swirl angles over 18° affected the pressure recovery negatively for all strut configurations.展开更多
Quantitative phase imaging(QPI)is a label-free computational imaging technique used in various fields,including biology and medical research.Modern QPI systems typically rely on digital processing using iterative algo...Quantitative phase imaging(QPI)is a label-free computational imaging technique used in various fields,including biology and medical research.Modern QPI systems typically rely on digital processing using iterative algorithms for phase retrieval and image reconstruction.Here,we report a diffractive optical network trained to convert the phase information of input objects positioned behind random diffusers into intensity variations at the output plane,all-optically performing phase recovery and quantitative imaging of phase objects completely hidden by unknown,random phase diffusers.This QPI diffractive network is composed of successive diffractive layers,axially spanning in total~70λ,where is the illumination wavelength;unlike existing digital image reconstruction and phase retrieval methods,it forms an all-optical processor that does not require external power beyond the illumination beam to complete its QPI reconstruction at the speed of light propagation.This all-optical diffractive processor can provide a low-power,high frame rate and compact alternative for quantitative imaging of phase objects through random,unknown diffusers and can operate at different parts of the electromagnetic spectrum for various applications in biomedical imaging and sensing.The presented QPI diffractive designs can be integrated onto the active area of standard CCD/CMOS-based image sensors to convert an existing optical microscope into a diffractive QPI microscope,performing phase recovery and image reconstruction on a chip through light diffraction within passive structured layers.展开更多
Highly efficient turbine exhaust diffuser cannot be designed without taking into account the unsteady interactions with the last rotating row of the turbine. Former investigations described in the literature show a ve...Highly efficient turbine exhaust diffuser cannot be designed without taking into account the unsteady interactions with the last rotating row of the turbine. Former investigations described in the literature show a very high potential compared to that of other parts of turbomachines for improving the diffuser. A scale model of a typical gas turbine exhaust diffuser is investigated experimentally. To investigate the influence of rotating wakes, measurements without a spoke wheel as well as measurements with a variable-speed rotating cylindrical spoke wheel with 2 mm- or 10 mm-spokes simulating turbine rotor wakes were made. Miniaturized 3-hole pneumatic probes as well as a 2D-Laser-Doppler-Velocimeter （LDV） were used to investigate velocity profiles. 122 static pressure tapings were used to measure several axial and circumferential static pressure distributions. Without a spoke-wheel the annular diffuser separates at the shroud for all swirl configurations. For the measurements with the 2 mm spoke wheel, the separating diffuser was unstable while keeping the test rig operating parameters constant. For a non-rotating 10 mm spoke wheel and at rotational speeds less than 1,000 rpm, the annular diffuser separated at the shroud. Increasing the rotational speed of the 10mm spoke wheel, flow did not separate at the shroud and much higher pressure recovery than without spoke wheel has achieved.展开更多
A numerical model has been developed for computing turbulent flow in plane-wall diffuser.The model solves the weakly compressible flow equations with the application of the Smagorinsky's subgrid-scale turbulence m...A numerical model has been developed for computing turbulent flow in plane-wall diffuser.The model solves the weakly compressible flow equations with the application of the Smagorinsky's subgrid-scale turbulence model and the boundary conditions of partial slip and no slip at the solid wall.Application examples include two-dimensional calculations of unstalled and stalled flows in diffusers of small diverging angle,as well as transitory stall flow in a symmetric diffuser of 16°total angle.For the unstalled and stalled flows,the calculated pressure recovery and velocity profile are compared with experimental data.For the transitory stall flow,the com- putational result shows the unsteady flow features including the vortex shedding and stall washout phenomena that have been experimentally observed.展开更多
Three vaned diffusers, designed to have high negative incidence (-8°) at the design operating point, are studied experimentally. The overall performance (efficiency and pressure ratio) are measured at three rotat...Three vaned diffusers, designed to have high negative incidence (-8°) at the design operating point, are studied experimentally. The overall performance (efficiency and pressure ratio) are measured at three rotational speeds, and flow angles before and after the diffuser are measured at the design rotational speed and with three mass flow rates. The results are compared to corresponding results of the original vaneless diffuser design. Attention is paid to the performance at lower mass flows than the design mass flow. The results show that it is possible to improve the performance at mass flows lower than the design mass flow with a vaned diffuser designed with high negative incidence. However, with the vaned diffusers, the compressor still stalls at higher mass flow rates than with the vaneless one. The flow angle distributions after the diffuser are more uniform with the vaned diffusers.展开更多
This paper presents a three-dimensional flow field simulation of the steady flows through diffusers and nozzles with straight or serrated-sided walls to analyze the effect of the channel structure on the flow characte...This paper presents a three-dimensional flow field simulation of the steady flows through diffusers and nozzles with straight or serrated-sided walls to analyze the effect of the channel structure on the flow characteristics.The pressure and velocity profiles in the diffusers and the nozzles as well as the net volumetric flow rate are determined.Our simulation demonstrates that the pressure and velocity profiles in the serrated diffuser/nozzles are more complicated than those with the straight-sided wall,while the net steady flow rate with the straight-sided wall increases monotonically with the increase of the pressure difference,the steady flow rate with serrated sided walls increases gradually to reach a maximum and then decreases with the increase of the pressure difference.The results suggest that the number of the sawteeth plays a significant role in optimizing the design of serrated diffusers and nozzles for improving the transport efficiency of valveless micro-pumps.展开更多
基金supported by the National Natural Science Foundation of China(No.52375274)the Zhejiang Provincial Natural Science Foundation of China(No.LD21E050003)+1 种基金the Key R&D Program of Zhejiang Province(No.2023C01229)the Central Government Fund for Regional Science and Technology Development of China(No.2023ZY1033).
文摘The thermocline energy storage tank(TEST)serves as a crucial component in thermal energy storage systems,utilizing the working fluid that enters through a diffuser to store and harness energy.However,the conventional double-plate radial diffuser is ill-suited for a single-medium TEST’s full tank storage due to its unidirectional fluid inflow.There has been a notable lack of optimization analysis of diffusers.Two innovative tubular diffuser designs with reduced cross-sectional areas have been introduced:the annular-arranged diffuser(AAD)and the cross-arranged diffuser(CAD).To elucidate the impact of diffuser designs on energy storage efficiency,a 3D transient computational fluid dynamics(CFD)model was established to simulate a thermocline formation under two diffuser types.The model was validated against experimental data.Results showed that the thermocline of AAD was 11.39%thinner than that of a traditional double-plate diffuser.In the process of charging and discharging,the time-varying thermocline and factors influencing thermocline thickness were analyzed.Results indicate that in the mixed dominant region,increased turbulent kinetic energy correlates with reduced thermocline thickness.Notably,the AAD’s stable thermocline was 4.23%and 5.41%thinner than the CAD’s during charging and discharging,respectively,making the AAD preferable for engineering applications.The effects of tube diameter and orifice opening angle on temperature stratification performance were also examined.The findings suggest that an inclined impact jet and large-diameter tubes are more conducive to temperature stratification.Moreover,an orifice diameter optimization method was developed,which can decrease the thermocline by 6.78%.
文摘The influence of diffuser parameters, including the riser spacing, port number in a riser, injection angle, port arrangement, etc., on the surface initial dilution is experimentally investigated. The relative density difference between the effluent and the sea water in the model is the same as that in the prototype, and the effect of the cross current is simulated by an inverse model technique. Based on the result analysis, the arrangement with more ports in a riser and larger riser spacing is suggested to save construction cost. The relationship between the Reynolds number based on the port diameter and velocity, and the surface initial dilution is also explored, and the critical Reynolds number is proposed.
文摘Multiport diffusers are the effective engineering devices installed at the marine outfall systems for the steady discharge of effluent streams from the modern coastal plants, such as municipal sewage treatment, power generation and seawater desalination. A far field mathematical model using a two-dimensional advection-diffusion equation is presented for continuous discharges of effluent streams from multiple outfalls on a uniformly sloping beach with a current parallel to the shoreline. The analytical solutions are illustrated graphically to replicate and capture the merging process of effluent plumes in shallow coastal waters, and then asymptotic approximation will be made to the maximum shoreline’s concentration to formulate effluent discharge plume dilution from a multiport diffuser.
基金supported by the U.S. Department of Energy (DOE), Office of Basic Energy Sciences, Division of Materials Sciences and Engineering under Award No. DE-SC0023088
文摘Free-space optical information transfer through diffusive media is critical in many applications, such as biomedical devices and optical communication, but remains challenging due to random, unknown perturbations in the optical path. We demonstrate an optical diffractive decoder with electronic encoding to accurately transfer the optical information of interest, corresponding to, e.g., any arbitrary input object or message, through unknown random phase diffusers along the optical path. This hybrid electronic-optical model, trained using supervised learning, comprises a convolutional neural network-based electronic encoder and successive passive diffractive layers that are jointly optimized. After their joint training using deep learning,our hybrid model can transfer optical information through unknown phase diffusers, demonstrating generalization to new random diffusers never seen before. The resulting electronic-encoder and optical-decoder model was experimentally validated using a 3D-printed diffractive network that axially spans <70λ, whereλ = 0.75 mm is the illumination wavelength in the terahertz spectrum, carrying the desired optical information through random unknown diffusers. The presented framework can be physically scaled to operate at different parts of the electromagnetic spectrum, without retraining its components, and would offer low-power and compact solutions for optical information transfer in free space through unknown random diffusive media.
基金the support provided by the National Key R&D Plan (2017YFB0903604)the National Science Fund for Distinguished Young Scholars (51925604)+1 种基金the International Partnership Program, Bureau of International Cooperation of Chinese Academy of Sciences (182211KYSB20170029)the Guizhou Province Large Scale Physical Energy Storage Technology Research and Development Platform ([2019]4011)
文摘As a variable-condition adjustment technology,the adjustable vaned diffusers(AVDs)can expand the working flow range of the compressor in the compressed air energy storage(CAES)system and improve its aerodynamic performance.In order to investigate the regulatory mechanism of AVDs and capture the details of vane loading distribution for the diffuser design optimization,additively manufactured AVDs for testing in a centrifugal compressor closed test facility are designed and implemented.Firstly,the regulation law of AVDs was summarized by numerical analysis and experimental support,and the corresponding vane loading data was extracted for the distribution law.Then,based on the distribution characteristics,3D diffuser models were designed suitably for the adjustable components.Then,the laser selective melting(SLM)technology and die steel material 1.2709 were selected for metal printing according to the actual operating environment.Finally,performance testing and accuracy detection were performed on the finished test pieces,almost all inlet hole’s deviations were within the 0.3 mm tolerance.The research results indicated that additive manufacturing can significantly improve the accessibility of the internal flow channels of the diffuser,and derive the load of the blade on the pressure surface and suction surface in detail,also provide adjustable functions for variable operating conditions.It can not only break through the traditional processing bottleneck of the complicated internal flow channels of AVDs but also improve the design matching degree with adjustable components;simultaneously,it ensures high performance with high precision and effectively shortens the long lead time.
基金The authors acknowledge the U.S.National Science Foundation and Fujikura.
文摘Imaging through diffusers presents a challenging problem with various digital image reconstruction solutions demonstrated to date using computers.Here,we present a computer-free,all-optical image reconstruction method to see through random diffusers at the speed of light.Using deep learning,a set of transmissive diffractive surfaces are trained to all-optically reconstruct images of arbitrary objects that are completely covered by unknown,random phase diffusers.After the training stage,which is a one-time effort,the resulting diffractive surfaces are fabricated and form a passive optical network that is physically positioned between the unknown object and the image plane to all-optically reconstruct the object pattern through an unknown,new phase diffuser.We experimentally demonstrated this concept using coherent THz illumination and all-optically reconstructed objects distorted by unknown,random diffusers,never used during training.Unlike digital methods,all-optical diffractive reconstructions do not require power except for the illumination light.This diffractive solution to see through diffusers can be extended to other wavelengths,and might fuel various applications in biomedical imaging,astronomy,atmospheric sciences,oceanography,security,robotics,autonomous vehicles,among many others.
基金supported by the National Natural Science Foundation of China,No.82274304(to YH)the Major Clinical Study Projects of Shanghai Shenkang Hospital Development Center,No.SHDC2020CR2046B(to YH)Shanghai Municipal Health Commission Talent Plan,No.2022LJ010(to YH).
文摘Cerebral small vessel disease encompasses a group of neurological disorders characterized by injury to small blood vessels,often leading to stroke and dementia.Due to its diverse etiologies and complex pathological mechanisms,preventing and treating cerebral small vessel vasculopathy is challenging.Recent studies have shown that the glymphatic system plays a crucial role in interstitial solute clearance and the maintenance of brain homeostasis.Increasing evidence also suggests that dysfunction in glymphatic clearance is a key factor in the progression of cerebral small vessel disease.This review begins with a comprehensive introduction to the structure,function,and driving factors of the glymphatic system,highlighting its essential role in brain waste clearance.Afterwards,cerebral small vessel disease was reviewed from the perspective of the glymphatic system,after which the mechanisms underlying their correlation were summarized.Glymphatic dysfunction may lead to the accumulation of metabolic waste in the brain,thereby exacerbating the pathological processes associated with cerebral small vessel disease.The review also discussed the direct evidence of glymphatic dysfunction in patients and animal models exhibiting two subtypes of cerebral small vessel disease:arteriolosclerosis-related cerebral small vessel disease and amyloid-related cerebral small vessel disease.Diffusion tensor image analysis along the perivascular space is an important non-invasive tool for assessing the clearance function of the glymphatic system.However,the effectiveness of its parameters needs to be enhanced.Among various nervous system diseases,including cerebral small vessel disease,glymphatic failure may be a common final pathway toward dementia.Overall,this review summarizes prevention and treatment strategies that target glymphatic drainage and will offer valuable insight for developing novel treatments for cerebral small vessel disease.
基金Supported by the National Natural Science Foundation of China(Grant No.12261081).
文摘In this paper,we are concerned with the stability of traveling wavefronts of a Belousov-Zhabotinsky model with mixed nonlocal and degenerate diffusions.Such a system can be used to study the competition among nonlocally diffusive species and degenerately diffusive species.We prove that the traveling wavefronts are exponentially stable,when the initial perturbation around the traveling waves decays exponentially as x→-∞,but in other locations,the initial data can be arbitrarily large.The adopted methods are the weighted energy with the comparison principle and squeezing technique.
基金supported by the National Key R&D Program of China,Nos.2017YFA0104302(to NG and XM)and 2017YFA0104304(to BW and ZZ)
文摘Mesenchymal stromal cell transplantation is an effective and promising approach for treating various systemic and diffuse diseases.However,the biological characteristics of transplanted mesenchymal stromal cells in humans remain unclear,including cell viability,distribution,migration,and fate.Conventional cell tracing methods cannot be used in the clinic.The use of superparamagnetic iron oxide nanoparticles as contrast agents allows for the observation of transplanted cells using magnetic resonance imaging.In 2016,the National Medical Products Administration of China approved a new superparamagnetic iron oxide nanoparticle,Ruicun,for use as a contrast agent in clinical trials.In the present study,an acute hemi-transection spinal cord injury model was established in beagle dogs.The injury was then treated by transplantation of Ruicun-labeled mesenchymal stromal cells.The results indicated that Ruicunlabeled mesenchymal stromal cells repaired damaged spinal cord fibers and partially restored neurological function in animals with acute spinal cord injury.T2*-weighted imaging revealed low signal areas on both sides of the injured spinal cord.The results of quantitative susceptibility mapping with ultrashort echo time sequences indicated that Ruicun-labeled mesenchymal stromal cells persisted stably within the injured spinal cord for over 4 weeks.These findings suggest that magnetic resonance imaging has the potential to effectively track the migration of Ruicun-labeled mesenchymal stromal cells and assess their ability to repair spinal cord injury.
文摘Improvement of aerodynamic performance and reduction of interaction tone noise of a centrifugal compressor with vaned diffusers are discussed by experiments and visualization techniques using a colored off-film method. The focus of the research is concentrated on the leading edge shape of diffuser vanes that are deeply related to the generation mechanism of the interaction tone noise. The compressor-radiated noise can be reduced by more than ten decibels by using modified diffuser vanes which have 3-D tapered shapes on both pressure and suction sur- faces of the leading edge. Furthermore, by adopting the proposed modified diffuser vanes, the secondary flow which is considered to be an obstruction of diffuser pressure recovery can be suppressed, and also the pressure decrease observed in the throat part of the diffuser flow passage is reducible. Thus, the proposed diffuser vanes show a favorable result for both noise and the aerodynamic performance of the centrifugal compressor, and offer a few basic guidelines for the diffuser vane design.
基金The research is supported by National Natural Science Foundation of China(51875410).
文摘Centrifugal compressors for the fuel cell vehicles often operate near the surge line compared with the turbocharger compressors.Low solidity and half vaned diffusers are recognized as good ways to improve the stability of the centrifugal compressor.The presented work investigated four diffuser configurations (i.e.,the vaneless diffuser (VLD),full-height low solidity vaned diffuser (LSVD),hub-side half vaned diffuser (HVD) and shroud-side half vaned diffuser (SVD)) through steady-state and unsteady numerical simulations.The results show that the best performance is achieved by the LSVD,HVD and SVD at the design,surge and choke conditions.The flow rate at the surge operating point of the HVD has decreased by 15.53% compared with the LSVD,and 9.21% compared with the VLD.At near surge operating point,a longitudinal suction side passage vortex is formed on the hub of the LSVD and rotates as circumferential stall cells.A hairpin vortex is formed along the leading edge and is dragged by the main flow along the suction side as a local vortex shedding.The mechanism of the stability improvement by half vaned diffusers is that the tip leakage vortex migrates from the clearance side to the vane mounting side and replenishes the low-momentum zone on the mounting side.The best position where the half vaned diffuser should be mounted is based on the impeller outlet flow conditions,namely,the location of the wake region,where the meridional velocity and relative stagnation pressure is low.
基金financially supported by Japan Society for the Promotion of Science(JSPS) program of"Strategic young researcher overseas visits program for accelerating brain circulation"
文摘High-pressure ratio and wide operating range are highly required for compressors and blowers. The technical issue of the design is achievement of suppression of flow separation at small flow rate without deteriorating the efficiency at design flow rate. A numerical simulation is very effective in design procedure, however, cost of the numerical simulation is generally high during the practical design process, and it is difficult to confn＇m the optimal design which is combined with many parameters. A multi-objective optimization technique is the idea that has been proposed for solving the problem in practical design process. In this study, a Low Solidity circular cascade Diffuser （LSD） in a centrifugal blower is successfully designed by means of multi-objective optimization technique. An optimization code with a meta-model assisted evolutionary algorithm is used with a commercial CFD code ANSYS-CFX. The optimization is aiming at improving the static pressure coefficient at design point and at low flow rate condition while constraining the slope of the lift coefficient curve. Moreover, a small tip clearance of the LSD blade was applied in order to activate and to stabilize the secondary flow effect at small flow rate condition. The optimized LSD blade has an extended operating range of 114 % towards smaller flow rate as compared to the baseline design without deteriorating the diffuser pressure recovery at design point. The diffuser pressure rise and operating flow range of the optimized LSD blade are experimentally verified by overall performance test. The detailed flow in the diffuser is also confirmed by means of a Particle Image Velocimeter. Secondary flow is clearly captured by PIV and it spreads to the whole area of LSD blade pitch. It is found that the optimized LSD blade shows good improvement of the blade loading in the whole operating range, while at small flow rate the flow separation on the LSD blade has been successfully suppressed by the secondary flow effect.
文摘The increasing use of gas turbines in combined cycle power plants together with the high amount of kinetic energy in modem gas turbine exhaust flows focuses attention on the design of gas turbine diffusers as the connecting part between the Brayton/Joule and the Rankine parts of the combined cycle. A scale model of a typical gas turbine exhaust diffuser is investigated experimentally. The test rig consists of a radial type, variable swirl generator which provides the exhaust flow corresponding to different gas turbine operating conditions. Static pressure measurements are carried out along the outer diffuser walls and along the hub of the annular part and along the centerline of the conical diffuser. Velocity distributions at several axial positions in the annular and conical diffuser have been measured using a Laser Doppler Velocimeter （LDV）. Pressure recovery coefficients and velocity profiles are depicted as a function of diffuser length for several combinations of swirl strength, tip flow and strut geometries. The diffuser without struts achieved a higher pressure recovery than the diffuser with struts at all swirl angle settings. The diffuser with cylindrical struts achieved a higher pressure recovery than the diffuser with profiled struts at all swirl angle seO.ings. Inlet flows with swirl angles over 18° affected the pressure recovery negatively for all strut configurations.
文摘Quantitative phase imaging(QPI)is a label-free computational imaging technique used in various fields,including biology and medical research.Modern QPI systems typically rely on digital processing using iterative algorithms for phase retrieval and image reconstruction.Here,we report a diffractive optical network trained to convert the phase information of input objects positioned behind random diffusers into intensity variations at the output plane,all-optically performing phase recovery and quantitative imaging of phase objects completely hidden by unknown,random phase diffusers.This QPI diffractive network is composed of successive diffractive layers,axially spanning in total~70λ,where is the illumination wavelength;unlike existing digital image reconstruction and phase retrieval methods,it forms an all-optical processor that does not require external power beyond the illumination beam to complete its QPI reconstruction at the speed of light propagation.This all-optical diffractive processor can provide a low-power,high frame rate and compact alternative for quantitative imaging of phase objects through random,unknown diffusers and can operate at different parts of the electromagnetic spectrum for various applications in biomedical imaging and sensing.The presented QPI diffractive designs can be integrated onto the active area of standard CCD/CMOS-based image sensors to convert an existing optical microscope into a diffractive QPI microscope,performing phase recovery and image reconstruction on a chip through light diffraction within passive structured layers.
基金German Ministry of Economics and Technology under the AG Turbo's COOREFF-T program
文摘Highly efficient turbine exhaust diffuser cannot be designed without taking into account the unsteady interactions with the last rotating row of the turbine. Former investigations described in the literature show a very high potential compared to that of other parts of turbomachines for improving the diffuser. A scale model of a typical gas turbine exhaust diffuser is investigated experimentally. To investigate the influence of rotating wakes, measurements without a spoke wheel as well as measurements with a variable-speed rotating cylindrical spoke wheel with 2 mm- or 10 mm-spokes simulating turbine rotor wakes were made. Miniaturized 3-hole pneumatic probes as well as a 2D-Laser-Doppler-Velocimeter （LDV） were used to investigate velocity profiles. 122 static pressure tapings were used to measure several axial and circumferential static pressure distributions. Without a spoke-wheel the annular diffuser separates at the shroud for all swirl configurations. For the measurements with the 2 mm spoke wheel, the separating diffuser was unstable while keeping the test rig operating parameters constant. For a non-rotating 10 mm spoke wheel and at rotational speeds less than 1,000 rpm, the annular diffuser separated at the shroud. Increasing the rotational speed of the 10mm spoke wheel, flow did not separate at the shroud and much higher pressure recovery than without spoke wheel has achieved.
文摘A numerical model has been developed for computing turbulent flow in plane-wall diffuser.The model solves the weakly compressible flow equations with the application of the Smagorinsky's subgrid-scale turbulence model and the boundary conditions of partial slip and no slip at the solid wall.Application examples include two-dimensional calculations of unstalled and stalled flows in diffusers of small diverging angle,as well as transitory stall flow in a symmetric diffuser of 16°total angle.For the unstalled and stalled flows,the calculated pressure recovery and velocity profile are compared with experimental data.For the transitory stall flow,the com- putational result shows the unsteady flow features including the vortex shedding and stall washout phenomena that have been experimentally observed.
基金the financial support of the Academy of Finland, the Finnish Funding Agency for Technology and Innovation - TEKES, and Cardo Production Finland Oy (former High Speed Tech Oy Ltd.)
文摘Three vaned diffusers, designed to have high negative incidence (-8°) at the design operating point, are studied experimentally. The overall performance (efficiency and pressure ratio) are measured at three rotational speeds, and flow angles before and after the diffuser are measured at the design rotational speed and with three mass flow rates. The results are compared to corresponding results of the original vaneless diffuser design. Attention is paid to the performance at lower mass flows than the design mass flow. The results show that it is possible to improve the performance at mass flows lower than the design mass flow with a vaned diffuser designed with high negative incidence. However, with the vaned diffusers, the compressor still stalls at higher mass flow rates than with the vaneless one. The flow angle distributions after the diffuser are more uniform with the vaned diffusers.
基金the National Natural Science Foundation of China(Grant Nos.61376115,11672065).
文摘This paper presents a three-dimensional flow field simulation of the steady flows through diffusers and nozzles with straight or serrated-sided walls to analyze the effect of the channel structure on the flow characteristics.The pressure and velocity profiles in the diffusers and the nozzles as well as the net volumetric flow rate are determined.Our simulation demonstrates that the pressure and velocity profiles in the serrated diffuser/nozzles are more complicated than those with the straight-sided wall,while the net steady flow rate with the straight-sided wall increases monotonically with the increase of the pressure difference,the steady flow rate with serrated sided walls increases gradually to reach a maximum and then decreases with the increase of the pressure difference.The results suggest that the number of the sawteeth plays a significant role in optimizing the design of serrated diffusers and nozzles for improving the transport efficiency of valveless micro-pumps.
