A study has been made on diffusion bonding of SiCp/2024Ai composites by means of pure Al interlayer. In the condition of TB=843 K, PB=16 MPa, tB= 60 min, the diffusion bonded joint, with a shear strength of 235 MPa, w...A study has been made on diffusion bonding of SiCp/2024Ai composites by means of pure Al interlayer. In the condition of TB=843 K, PB=16 MPa, tB= 60 min, the diffusion bonded joint, with a shear strength of 235 MPa, was obtained when a 15 μm thick interlayer was used. The results of the shear testing and SEM indicate that fracture of the joint presented characteristics of ductile rupture.展开更多
The as-sintered sinter skin and the polished section of WC-11Co-0.4Cr 3 C 2-0.3VC-0.2RE（RE=mischmetal with La/Ce ratio of 0.65） alloy were analyzed.It was shown that the microstructures on the skin and in the inner ...The as-sintered sinter skin and the polished section of WC-11Co-0.4Cr 3 C 2-0.3VC-0.2RE（RE=mischmetal with La/Ce ratio of 0.65） alloy were analyzed.It was shown that the microstructures on the skin and in the inner part of the alloy were all characterized with a WC＋β＋M structure,where β was a cobalt-based binder phase and M represented a RE-containing phase.There existed an inward diffusion of S atoms,which caught and fixed the Ce atoms in the alloy and an outward diffusion of La atoms during the sintering process.Consequently,the M phase was characterized with the decreased La/Ce ratio（0.59） in the inner part and the increased La/Ce ratio（1.01） on the skin.The M phase on the skin was characterized with a γ-Ce 2 S 3 type structure.To suppress the long range migration of rare earth to the skin,S in the sintering atmosphere had to be eliminated.展开更多
The increase of thickness of carbide layer during carbide diffusion coating is proportional to the root of carbon activity in various steels. Thus it was demonstrated that the controlling fac- tor of the dynamics of c...The increase of thickness of carbide layer during carbide diffusion coating is proportional to the root of carbon activity in various steels. Thus it was demonstrated that the controlling fac- tor of the dynamics of carbide layer growth is carbon activity in steel matrix, but not carbon concentration.展开更多
In order to investigate the carbide dissolution mechanism of high carbon-chromium bearing steel during the intercritical austenitization, the database of TCFE7 of Thermo-calc and MOBFE of DICTRA software were used to ...In order to investigate the carbide dissolution mechanism of high carbon-chromium bearing steel during the intercritical austenitization, the database of TCFE7 of Thermo-calc and MOBFE of DICTRA software were used to calculate the elements diffusion kinetic and the evolution law of volume fraction of carbide. DIL805 A dilatometer was used to simulate the intercritical heat treatment. The microstructure was observed by scanning electron microscopy（SEM）, and the micro-hardness was tested. The experimental results indicate that the dissolution of carbide is composed of two stages： initial austenite growth governed by carbon diffusion which sharply moves up the micro-hardness of quenched martensite, and subsequent growth controlled by diffusion of Cr elements in M3 C. The volume fraction of M3 C decreases with the increasing holding time, and the metallographic analysis shows a great agreement with values calculated by software.展开更多
基金the National Advanced Technology "863" Project of China with !No.715-005-0800
文摘A study has been made on diffusion bonding of SiCp/2024Ai composites by means of pure Al interlayer. In the condition of TB=843 K, PB=16 MPa, tB= 60 min, the diffusion bonded joint, with a shear strength of 235 MPa, was obtained when a 15 μm thick interlayer was used. The results of the shear testing and SEM indicate that fracture of the joint presented characteristics of ductile rupture.
基金supported by National Natural Science Foundation of China (51074189,50823006)Science and Technology Planning Project Founda-tion of Hunan Province,China (2010FJ2006)+1 种基金Research Foundation for the Doctoral Program of Higher Education of China (20100162110001)the National Science & Technology Special Foundation of China (2011BAE09B02,2012ZX04003021)
文摘The as-sintered sinter skin and the polished section of WC-11Co-0.4Cr 3 C 2-0.3VC-0.2RE（RE=mischmetal with La/Ce ratio of 0.65） alloy were analyzed.It was shown that the microstructures on the skin and in the inner part of the alloy were all characterized with a WC＋β＋M structure,where β was a cobalt-based binder phase and M represented a RE-containing phase.There existed an inward diffusion of S atoms,which caught and fixed the Ce atoms in the alloy and an outward diffusion of La atoms during the sintering process.Consequently,the M phase was characterized with the decreased La/Ce ratio（0.59） in the inner part and the increased La/Ce ratio（1.01） on the skin.The M phase on the skin was characterized with a γ-Ce 2 S 3 type structure.To suppress the long range migration of rare earth to the skin,S in the sintering atmosphere had to be eliminated.
文摘The increase of thickness of carbide layer during carbide diffusion coating is proportional to the root of carbon activity in various steels. Thus it was demonstrated that the controlling fac- tor of the dynamics of carbide layer growth is carbon activity in steel matrix, but not carbon concentration.
基金Funded by the National High-tech Research and Development Program of China(863 Program)
文摘In order to investigate the carbide dissolution mechanism of high carbon-chromium bearing steel during the intercritical austenitization, the database of TCFE7 of Thermo-calc and MOBFE of DICTRA software were used to calculate the elements diffusion kinetic and the evolution law of volume fraction of carbide. DIL805 A dilatometer was used to simulate the intercritical heat treatment. The microstructure was observed by scanning electron microscopy（SEM）, and the micro-hardness was tested. The experimental results indicate that the dissolution of carbide is composed of two stages： initial austenite growth governed by carbon diffusion which sharply moves up the micro-hardness of quenched martensite, and subsequent growth controlled by diffusion of Cr elements in M3 C. The volume fraction of M3 C decreases with the increasing holding time, and the metallographic analysis shows a great agreement with values calculated by software.
